Energy transfer mechanisms in the KCaLa1−x−yCexTby(PO4)2 phases

The various mechanisms involved in the green emission of KCaLa_1?x?yCe_xTb_y(PO₄)₂ under UV excitation are analyzed for a weak terbium concentration (y = 0.05). Ce³⁺ → Tb³⁺ transfer can be described by the Dexter model, but only for a weak cerium concentration. For higher cerium contents the cerium lifetime temperature dependence can be fitted by using a model involving energy migration between Ce³⁺ ions before Ce³⁺ → Tb³⁺ transfer. The investigation of the variation of the terbium emission vs temperature involves the presence of energy-trapping defects in the material.     

Crystal structure and photoluminescence of (Y1−xCex)2Si3O3N4

Oxonitridosilicate phosphors with compositions of (Y_1−xCe_x)₂Si₃O₃N₄ (x=0−0.2) have been synthesized by solid state reaction method. The structures and photoluminescence properties have been investigated. Ce³⁺ ions have substituted for Y³⁺ ions in the lattice. The emission and excitation spectra of these phosphors show the characteristic photoluminescence spectra of Ce³⁺ ions. Based on the analyses of the diffuse reflection spectra and the PL spectra, a systematic energy diagram of Ce³⁺ ion in the forbidden band of sample with x=0.02 is given. The best doping Ce content in these phosphors is ∼2 mol%. The quenching temperature is ∼405 K for the 2 mol% Ce content sample. The luminescence decay properties were investigated. The primary studies indicate that these phosphors are potential candidates for application in three-phosphor-converted white LEDs.     

Excitation process and photoluminescence properties of Tb and Eu ions in SnO2 and in SnO2: Porous silicon hosts

Tin oxide (SnO₂)-layers-doped terbium and europium ions are elaborated by the sol-gel method on silicon substrates. After annealing at 500 °C, the transmission electron microscopy revealed a crystallization of tin oxide.The emission properties of rare-earth in SnO₂ are studied systematically against temperature annealing and Tb³⁺ concentration. The PL spectrum is optimal after annealing at 900 °C and the corresponding photoluminescence (PL) decay is nearly exponential, showing that the sample is homogenous and the PL process can be described by two levels system.The concentration effect shows a quenching of the PL intensity for Tb³⁺ concentration above 4%. From the investigation of the decay rate from the ⁷F₅ state within terbium concentration, we show that self-quenching is insured by dipole - dipole interaction. The evolutions of both PL intensity and PL lifetime versus temperature are studied. The PL intensity and PL lifetime are enhanced by deposing SnO₂:Tb³⁺ and SnO₂:Eu³⁺ in porous silicon. We show that an efficient excitation transfer from Si nanocrystallites to RE ions can occur.     

Proprietes optiques de la phase Na3La1−x−yCexTby(PO4)2

Dans la phase Na₃La_1?x?yCe_xTb_y(PO₄)₂, le terbium présente une émission très intense sous excitation U.V. en raison d'un transfert efficace de l'excitation du cérium au terbium, le recouvrement des spectres d'émission de Ce³⁺ et d'excitation de Tb³⁺ étant particulièrement bon. L'ordre cationique éloigne les ions activateurs les uns des autres, de sorte que le rendement quantique de l'émission reste élevé aux fortes concentrations en terbium.     

Luminescence enhancement by energy transfer from Ce ions in Ba1.6Ca0.4P2O7:Ce:Tb phosphor

The optical properties of Ba_1.6Ca_0.4P₂O₇ doped with Ce³⁺ and Tb³⁺ are investigated. Under excitation at 280 nm the emission spectrum of Ba_1.6Ca_0.4P₂O₇:Ce³⁺ consists of a peak at 370 nm and a shoulder at the longer wavelength side. The emission spectra of Ba_1.6Ca_0.4P₂O₇:Tb³⁺ shows the well-known emission lines due to ⁵D₄-⁷F_J transitions of Tb³⁺. The green emissions of Tb³⁺ ions are enhanced upon UV excitation through energy transfer from Ce³⁺ to Tb³⁺ ions. The efficiency of such an energy transfer is estimated based on spectroscopic data. The dependence of photoluminescence (PL) intensities of Ce³⁺ and Tb³⁺ emissions on Ce³⁺ or Tb³⁺ concentrations in the systems (Ba_1.6Ca_0.4P₂O₇:0.04Ce³⁺,xTb³⁺ and Ba_1.6Ca_0.4P₂O₇:xCe³⁺,0.04Tb³⁺) and the temperature dependence of PL emission spectra of Ba_1.6Ca_0.4P₂O₇:0.06Ce³⁺,0.04Tb³⁺ is also investigated.     

The effect of codopants on spectral-kinetic characteristics of luminescence of scintillation glasses doped with terbium ions

The effect of Ce³⁺ and Pr³⁺ ions on spectral-kinetic characteristics of luminescence of lithium–phosphate–borate glasses is studied. It is shown that terbium ion luminescence caused by transitions from ⁵D₃ and ⁵D₄ multiplets to the ground 7FJ term is detected in samples containing Tb³⁺/Ce³⁺ and Tb³⁺/Pr³⁺. It has been found that an increase in the concentration of cerium ions from 0.2 to 1 wt % leads to an increase in the intensity of main luminescence bands of terbium ions. In Tb³⁺/Pr³⁺ glasses, a decrease in the relative light yield is observed with an increase in the concentration of Pr³⁺ ions. Processes of energy transfer between Tb³⁺/Ce³⁺ and Tb³⁺/Pr³⁺ ions are discussed.     

Concentration dependence of the Ce3+ and Tb3+ luminescence of Ce1-xTbxMgAl11O19

The quenching of the Ce³⁺ emission and the increase of the Tb³⁺ emission with increasing x of Ce_1-xTb_xMgAl₁₁O₁₉ for x ? 0.35 is ascribed to energy transfer from Ce³⁺ to Tb³⁺, which is restricted to nearest rare earth neighbours. This transfer is almost complete at x ? 0.35. The decrease of the Tb³⁺ emission at higher Tb³⁺ concentrations is not due to Tb³⁺ concentrational quenching, but due to the limited solubility of Tb³⁺ in the CeMgAl₁₁O₁₉ phase.     

Flame-synthesized Y<Subscript>2</Subscript>O<Subscript>3</Subscript>:Tb<Superscript>3+</Superscript> nanocrystals as spectral converting materials

In flame spray pyrolysis (FSP), the generation of uniform nanoparticles can be quite challenging due to difficulties in controlling droplet sizes during liquid spraying and uneven flame temperature. Here, we report a method to produce relatively uniform nanocrystals of a Tb³⁺ doped Y₂O₃ phosphor. In ethanol, metal nitrate precursors were simply mixed with organic surfactants to form a homogeneous solution which was then subjected to FSP. Depending on relative concentrations of the surfactant (oleic acid) to the metal precursors (yttrium and terbium nitrates), different sizes and morphologies of Y₂O₃:Tb³⁺ particles were obtained. By adjusting the surfactant concentration, Y₂O₃:Tb³⁺ crystals as small as 20~25 nm were acquired. X-ray diffraction and transmittance electron microscopy were used to prove that as-synthesized nanoparticles were highly crystalline due to the high temperature of FSP. X-ray photoelectron spectroscopy revealed that terbium dopants were well distributed throughout Y₂O₃ particles and a small portion of carbonate impurities were remained on the surface of particles, presumably originated from incomplete combustion of the organic surfactants. Photoluminescence (PL) spectra of Y₂O₃:Tb³⁺ nanocrystals exhibited a green light emission ensuring that the terbium doping was successfully occurred. However, when post-annealing was performed on the nanocrystals, their PL was dramatically enhanced indicating that quenching centers such as carbonate impurities and surface defects may have been removed by the annealing process. Owing to the continuous processability of FSP, this current method can be a practical way to produce nanoparticles in a large quantity. The obtained Y₂O₃:Tb³⁺ nanocrystals were used to fabricate a transparent film with poly-ethylene-co-vinyl acetate (poly-EVA) polymer, which was suitable for a spectral converting layer for a solar cell.

Open image in new window

Graphical abstract ?

     

Luminescent properties of HTP AgGd1−xW2O8:Eux and AgGd1−x(W1−yMoy)2O8:Eux phosphor for white LED

Intense red phosphors, AgGd_1−xEu_x(W_1−yMo_y)₂O₈ (x=0.0-1.0, y=0.0-1.0), have been synthesized through traditional solid-state reaction and characterized by X-ray diffraction (XRD) and photoluminescence (PL). XRD results reveal that AgGd_1−xEu_xW₂O₈ synthesized at 1000 °C has a tetragonal crystal structure, which is named as high temperature phase (HTP) AgGdW₂O₈. All phosphors compositions with Eu³⁺ show red and green emission on excitation either in the charge-transfer or Eu³⁺ levels. Analysis of the emission spectra with different Eu³⁺ concentrations reveal that the optimum dopant concentration for Eu³⁺ is x=0.6 in the HTP AgGd_1−xEu_xW₂O₈ (x=0.0-1.0). Studies on the AgGd_0.4Eu_0.6(W_1−yMo_y)₂O₈ (y=0.0-1.0) and AgGd_1−xEu_x(W_0.7Mo_0.3)₂O₈ (x=0.0-1.0) show that the emission intensity is maximum for compositions with y=0.3 and x=0.5, respectively, and a decrease in emission intensity is observed for higher y or x values. The Mo⁶⁺ and Eu³⁺ co-doped AgGd(WO₄)₂ phosphors show higher emission intensity in comparison with the singly Eu³⁺-doped AgGd(WO₄)₂ in UV region. The intense emission of the tungstate/molybdate phosphors under 394 and 465 nm excitations, respectively, suggests that these materials are promising candidates as red-emitting phosphors for near-UV/blue GaN-based white LED for white light generation.     

Luminescent properties of SrAl2B2O7: Ce, Tb

By using metal nitrates as starting materials, SrAl₂B₂O₇: Tb³⁺ and SrAl₂B₂O₇: Ce³⁺, Tb³⁺ powder phosphors were prepared by sol-gel method. X-ray diffraction (XRD), photoluminescence excitation and emission, as well as kinetic decays were employed to characterize the resulting samples. The results show that energy transfers from Ce³⁺ to Tb³⁺ ions. The emission intensity of Tb³⁺ ions in SrAl₂B₂O₇ could be greatly intensified when Ce³⁺ ions are doped into SrAl₂B₂O₇: Tb³⁺. The decay times of SrAl₂B₂O₇: Tb³⁺ were prolonged when Ce³⁺ ions were doped. The doping of Ce³⁺ ions not only improved the luminescent intensity, but also made the materials gets stable luminescent properties.     

Synthesis and luminescence investigation of RE (Eu, Tb and Ce)-doped lithium silicate (Li2SiO3)

Synthesis and photoluminescence (PL) investigations of lithium metasilicate doped with Eu³⁺, Tb³⁺ and Ce³⁺ were carried out. PL spectra of Eu-doped sample showed peaks corresponding to the ⁵D₀→⁷F_j (j=1, 2, 3 and 4) transitions under ultraviolet excitation. Strong red emission coming from the hypersensitive ⁵D₀→⁷F₂ transition of Eu³⁺ ion suggested the presence of the dopant ion in structurally disordered environment. Tb³⁺-doped silicate sample showed blue-green emission corresponding to the ⁵D₄→⁷F_j (j=6, 5 and 4) transitions. Ce-doped sample under excitation from UV, showed a broad emission band in the region 350-370 nm with shoulders around 410 nm. The fluorescence lifetimes of Eu³⁺ and Tb³⁺ ions were found out to be 790 and 600 μs, respectively. For Ce³⁺, the lifetime was of the order of 45 ns. PL spectra of the europium- and terbium-doped samples were compared with commercial red (Y₂O₃:Eu³⁺) and green (LaPO₄:Tb³⁺) phosphors, respectively. It was found that the emission from the doped silicate sample was 37% of the commercial phosphor in case of the Tb-doped sample and 8% of the commercial phosphor in case of the Eu-doped sample.     

Electrical conductivity of (Er,U)O2+x and (Ce,U)O2+x

The electrical conductivity (σ) of (Er_yU_1−y)O_2+x (y=0.06, 0.20) and (Ce_yU_1−y)O_2+x (y=0.05, 0.15, 0.25) has been measured as a function of oxygen partial pressure in the temperature range of 1100≤T/°C≤1300 by a d.c. 4-probe method. Both of the oxides exhibited Po₂-regions where the electrical conductivity is independent of oxygen partial pressure, which indicates that doped Er and Ce exist as trivalent cations on uranium sites and fix the hole concentration by acting as electron acceptors, i.e. [h]=[Er′_U] and [h]=[Ce′_U], respectively. It is considered that strong oxidization tendency of uranium and reduction tendency of cerium simultaneously render the cerium ions exist exclusively as Ce³⁺ in the uranium dioxide. The electron-hole mobility of (Er_yU_1−y)O_2+x and (Ce_yU_1−y)O_2+x in the Po₂ region where σ is constant has been calculated by the combination of the electrical conductivity and charge carrier concentration; the activation energy (E_H) of each oxide has been obtained from the temperature dependence of the mobility. Small polaron hopping conduction mechanism was confirmed by small magnitude of the mobility (0.018-0.052 cm² V⁻¹ s⁻¹) and the activation energy (0.12-0.22 eV).     

Enhanced luminescence of Tb by efficient energy transfer from Ce in Sr2B5O9Cl host

Ce³⁺ and Tb³⁺ co-doped Sr₂B₅O₉Cl phosphors with intense green emission were prepared by the conventional high-temperature solid-state reaction technique. A broad band centered at about 315 nm was found in phosphor Sr₂B₅O₉Cl: Ce³⁺, Tb³⁺ excitation spectrum, which was attributed to the 4f-5d transition of Ce³⁺. The typical sharp line emissions ranging from 450 to 650 nm were originated from the ⁵D₄ → ⁷F_J (J = 6, 5, 4, 3) transitions of Tb³⁺ ions. The photoluminescence (PL) intensity of green emission from Tb³⁺ was enhanced remarkably by co-doping Ce³⁺ in the Tb³⁺ solely doped Sr₂B₅O₉Cl phosphor because of the dipole-dipole mechanism resonant energy transfer from Ce³⁺ to Tb³⁺ ions. The energy transfer process was investigated in detail. In light of the energy transfer principles, the optimal composition of phosphor with the maximum green light output was established to be Sr_1.64Ce_0.08Tb_0.1Li_0.18B₅O₉Cl by the appropriate adjustment of dopant concentrations. The PL intensity of Tb³⁺ in the phosphor was enhanced about 40 times than that of the Tb³⁺ single doped phosphor under the excitation of their optimal excitation wavelengths.     

Synthesis, photoluminescence, thermoluminescence and dosimetry properties of novel phosphor Zn(BO2)2:Tb

Polycrystalline powder samples of terbium doped Zn(BO₂)₂ phosphors were prepared by solid state reaction in the thermal carbon reducing atmosphere at high temperature. The photoluminescence (PL), three-dimensional (3D) TL emission spectrum and dosimetric characteristics following ⁶⁰Co gamma-rays irradiation were studied. Characteristic emission bands of Tb³⁺ at about 490, 543, 584 and 620 nm, attributed to the ⁵D₄→⁷F_J (J=3, 4, 5, 6) transitions of Tb³⁺ ions, were observed in the TL and PL emission spectrum. No emission from Tb⁴⁺ ions was observed in the TL emission spectrum. The TL-dose response of the powder samples Zn(BO₂)₂:Tb to ⁶⁰Co gamma-rays radiation in the dose range from 1 to 100 Gy for clinical dose levels was almost linear. The experiment results showed that Zn(BO₂)₂:Tb has potential use as the materials of gamma-rays thermoluminescence dosimeter (TLD) for clinical dosimetry.     

Synthesis and photoluminescence of CeO2:Eu phosphor powders

The crystalline structure and photoluminescence (PL) properties of europium-doped cerium dioxide synthesized by the solid-state reaction method were analyzed. CeO₂:Eu³⁺ phosphor powders exhibit the pure cubic fluorite phase up to 10 mol% doping concentration of Eu³⁺. With indirect excitation of CeO₂ host at 373 nm, the PL intensity quickly increases with increasing Eu³⁺ concentration, up to about 1 mol%, and then decreases indicating the concentration quenching. While with direct excitation (467 nm), much more stronger PL emissions, especially the electric dipole emission ⁵D₀-⁷F₂ at 612 nm, are observed and no concentration quenching occurs up to 10 mol% doping concentration of Eu³⁺. The nature of this behavior and the cause of the concentration quenching were discussed.     

Jahn-Teller transition and electron-phonon interaction in Cr-doped manganites Sr0.9Ce0.1Mn1−yCryO3

Cr-doped manganites Sr_0.9Ce_0.1Mn_1−yCr_yO₃ (y=0, 0.05, and 0.10) have been systematically investigated by X-ray, magnetic, transport, and elastic properties measurements. For parent compound Sr_0.9Ce_0.1MnO₃, it undergoes a metal-insulator (M-I) transition at 318 K, which is suggested to originate from a first-order structural transition accompanied by Jahn-Teller (JT) transition. With increasing Cr doping content, the JT transition temperature decreases. The Cr doping suppresses the antiferromagnetic (AFM) state and makes the system spin-glass (SG) behavior at low temperatures. In the vicinity of JT transition temperatures, the softening of Young's modulus originating from the coupling of the orbital (quadrupolar) moment of the e_g orbital of Mn³⁺ ion to the elastic strain has been observed. The anomalous Young's modulus properties imply the electron-phonon coupling due to the JT effect may play an important role in the system.     

Facile synthesis and luminescence properties of uniform and monodisperse KY3F10:Ln3+ (Ln=Eu,Ce, Tb) nanospheres

Highly uniform and monodisperse KY₃F₁₀:Ln³⁺ (Ln=Eu, Ce, Tb) nanospheres, with an average diameter of 300 nm, have been successfully prepared through a simple template-free and surfactant-free stirring method under ambient conditions. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and photoluminescence (PL) spectra were used to characterize the samples. The SEM images illustrate that these spheres were actually composed of randomly aggregated nanoparticles. The doped rare earth ions show their characteristic emission in the KY₃F₁₀ samples, i.e., Eu^{3+ 5}D₀–⁷F_J (J=1, 2, 3, 4), Tb^{3+ 5}D₄–⁷F_J (J=6, 5, 4, 3, 2) and Ce³⁺ 5d–4f transition emissions, respectively. An energy transfer phenomenon from Ce³⁺ to Tb³⁺ has been observed in KY₃F₁₀ nanospheres, and the energy transfer efficiency depends on the doping concentration of Tb³⁺ if the concentration of Ce³⁺ is fixed.     

Heat-treatment-induced luminescence degradation in Tb-doped CePO4 nanorods

CePO₄:Tb nanorods were synthesized via a simple wet-chemical route. The as-synthesized CePO₄:Tb nanorods present high photoluminescence efficiency due to an efficient energy transfer form Ce³⁺ to Tb³⁺. However, heat treatment at 150 °C in air leads to a significant decrease of photoluminescence. X-ray photoelectron spectroscopy and excitation spectra revealed the oxidation of Ce³⁺ to Ce⁴⁺ in the heat-treatment process, which should be responsible for significant photoluminescence degradation due to the breakage of Ce³⁺→Tb³⁺ energy transfer. This conclusion is further supported by atmosphere and size effects of photoluminescence of CePO₄:Tb under the heat treatment.     

Synthesis and optical properties of 10 mol% Ce, 5 mol% Tb co-doped KGdF4 and GdF3 submicro/nanocrystals

By controlling the pH values of prepared solutions, the 10 mol% Ce³⁺, 5 mol% Tb³⁺ co-doped KGdF₄ (synthesized with pH = 3) and the 10 mol% Ce³⁺, 5 mol% Tb³⁺ co-doped GdF₃ (synthesized with pH = 1) submicro/nanocrystals have been synthesized based on a citric acid assisted hydrothermal method. For comparison, the samples synthesized by co-precipitation method (without hydrothermal treatment) with pH = 3 and 1 were also collected. The X-ray diffraction data illustrate that the hydrothermal treated KGdF₄ sample crystallizes in the cubic phase and the GdF₃ sample crystallizes in the orthorhombic phase. However, the samples synthesized by co-precipitation method with pH = 3 and 1 are both cubic phase KGdF₄. The field emission scanning electron microscopy images suggest that the hydrothermal treated KGdF₄ submicro/nanocrystals present spherical morphology and the GdF₃ submicrocrystals are rhombic-shaped. And the photoluminescence excitation and emission spectra as well as the luminescent dynamic curves demonstrate the difference in optical properties of the two hydrothermal treated samples.     

Eu/Tb ions co-doped white light luminescence Y2O3 phosphors

Y₂O₃:Eu³⁺, Tb³⁺ phosphors with white emission are prepared with different doping concentration of Eu³⁺ and Tb³⁺ ions and synthesizing temperatures from 750 to 950 °C by the co-precipitation method. The resulted phosphors were characterized by X-ray diffraction (XRD) and photoluminescence (PL) spectroscopy. The results of XRD indicate that the crystallinity of the synthesized samples increases with enhancing the firing temperature. The photoluminescence spectra indicate the Eu³⁺ and Tb³⁺ co-doped Y₂O₃ phosphors show five main emission peaks: three at 590, 611 and 629 nm originate from Eu³⁺ and two at 481 and 541 nm originate from Tb³⁺, under excitation of 250-320 nm irradition. The white light luminescence color could be changed by varying the excitation wavelength. Different concentrations of Eu³⁺ and Tb³⁺ ions were induced into the Y₂O₃ lattice and the energy transfer from Tb³⁺→Eu³⁺ ions in these phosphors was found. The Commission International de l’Eclairage (CIE) chromaticity shows that the Y₂O₃:Eu³⁺, Tb³⁺ phosphors can obtain an intense white emission.