Modification of graphene/graphene oxide with polymer brushes using controlled/living radical polymerization

Graphene nanosheets possess a range of extraordinary physical and electrical properties with enormous potential for applications in microelectronics, photonic devices, and nanocomposite materials. However, single graphene platelets tend to undergo agglomeration due to strong π–π and Van der Waals interactions, which significantly compromises the final material properties. One of the strategies to overcome this problem, and to increase graphene compatibility with a receiving polymer host matrix, is to modify graphene (or graphene oxide (GO)) with polymer brushes. The research to date can be grouped into approaches involving grafting‐from and grafting‐to techniques, and further into approaches relying on covalent or noncovalent attachment of polymer chains to the suitably modified graphene/GO. The present Highlight article describes research efforts to date in this area, focusing on the use of controlled/living radical polymerization techniques. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Responsive and patterned polymer brushes

While polymer brush systems continue to grow in popularity, so does their complexity and sophistication. Advances in polymerization and specific functionalization methods have led to novel applications in diverse research fields. The marriage of top‐down lithography with bottom‐up brush processing is becoming increasingly important in the development and progress of nanotechnology. The aim of this review is to examine different approaches taken to generate tailored polymer brush systems through surface‐initiated polymerizations as well as patterning techniques. Detaching polymer brushes to create free‐standing membranes is also highlighted and discussed in terms of methods and characterization. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1457–1472     

Functionalization and patterning of reactive polymer brushes based on surface reversible addition and fragmentation chain transfer polymerization

We present the synthesis of reactive polymer brushes prepared by surface reversible addition–fragmentation chain transfer polymerization of pentafluorophenyl acrylate. The reactive ester moieties can be used to functionalize the polymer brush film with virtually any functionality by simple post‐polymerization modification with amines. Dithiobenzoic acid benzyl‐(4‐ethyltrimethoxylsilyl) ester was used as the surface chain transfer agent (S‐CTA) and the anchoring group onto the silicon substrates. Reactive polymer brushes with adjustable molecular weight, high grafting density, and conformal coverage through the grafting‐from approach were obtained. Subsequently, the reactive polymer brushes were converted with amino‐spiropyrans resulting in reversible light‐responsive polymer brush films. The wetting behavior could be altered by irradiation with ultraviolet (UV) or visible light. Furthermore, a patterned surface of polymer brushes was obtained using a lithography technique. UV irradiation of the S‐CTA‐modified substrates leads to a selective degradation of S‐CTA in the exposed areas and gives patterned activated polymer brushes after a subsequent RAFT polymerization step. Conversion of the patterned polymer brushes with 5‐((2‐aminoethyl)amino)naphthalene‐1‐sulfonic acid resulted in patterned fluorescent polymer brush films. The utilization of reactive polymer brushes offers an easy approach in the fabrication of highly functional brushes, even for functionalities whose introduction is limited by other strategies. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Peptidic molecular brushes with enhanced chirality

Tethering oligopeptides through one end densely packed onto a linear polymer main chain will greatly reduce freedom of the peptide chains, which affords an easy access to investigate the secondary structure of peptides under constrained condition. Herein, molecular brushes with densely grafted monodispersed Cbz‐protected oligolysine were efficiently synthesized via free radical polymerization of the macromonomer‐bearing lysine octamer, and the secondary structures of the oligopeptide side chains in solutions were investigated. To examine the architecture effects on helical conformation, circular dichroism spectra from the polymer were compared with that from the corresponding macromonomer. To check the chemical structural effects on conformation of the oligopeptide, Cbz groups from the molecular brushes were deprotected, and the secondary structures of the polymers were compared before and after the deprotection. Conformation of the deprotected polymer was further explored by varying solution pH values. Complexation of the positively charged, deprotected polymer with anionic surfactant provides an alternative route to mediate the secondary structures of the short peptides in the constrained environment. It has been found that oligolysine side chains within the molecular brushes can adopt enhanced α‐helical conformation through the crowding structures or can form β‐sheet by hydrophobic interactions between the complexed surfactants. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Recent progress on cyclic polymers: Synthesis,bioproperties, and biomedical applications

Polymer topologies exert a significant effect on its properties, and polymer nanostructures with advanced architectures, such as cyclic polymers, star‐shaped polymers, and hyperbranched polymers, are a promising class of materials with advantages over conventional linear counterparts. Cyclic polymers, due to the lack of polymer chain ends, have displayed intriguing physical and chemical properties. Such uniqueness has drawn considerable attention over the past decade. The current review focuses on the recent progress in the design and development of cyclic polymer with an emphasis on its synthesis and bio‐related properties and applications. Two primary synthetic strategies towards cyclic polymers, that is, ring‐expansion polymerization and ring‐closure reaction are summarized. The bioproperties and biomedical applications of cyclic polymers are then highlighted. In the end, the future directions of this rapidly developing research field are discussed. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1447–1458     

Brushless and controlled microphase separation of lamellar polystyrene‐b‐polyethylene oxide thin films for block copolymer nanolithography

Creating perpendicular alignment in lamellar block copolymer (BCP) systems has considerable industrial and commercial significance, most importantly for generating nanowire structures in electronic devices. In general, these lamellar systems require careful interface engineering to obtain vertical orientation of the blocks. To avoid the strong preferential adsorption of one block to either the substrate or the polymer/air interface, the surface must be “neutralized” by chemical brushes or external forces, for example, solvent fields. Reported here is a stepwise thermo/solvent annealing process allowing the formation of perpendicular domains of polystyrene‐b‐polyethylene oxide lamellar structures while avoiding brush or other surface modifications. This BCP has a relatively small minimum feature size and can be used to generate substrate patterns for use in fabrication of nanowire electronic device structures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Molecule motion at polymer brush interfaces from single‐molecule experimental perspectives

Polymer brushes have been widely used as functional surface coatings for broad applications including antifouling, energy storage, and lubrications. Understanding the molecule dynamics at polymer brush interfaces is important in unraveling the structure–property relationships in these materials and establishing a new materials design paradigm of novel functional polymer thin films with efficient interfacial transport. By applying modern fluorescence‐based single‐molecule spectroscopic and microscopic techniques, molecule dynamics at varied polymer brush interfaces have been experimentally investigated in recent years. New insights are given to the understandings of some unique and unusual materials properties of polymer brush thin films. This review summarizes some recent studies of molecular diffusion at polymer brush interfaces, highlights some new understandings of the interfacial properties of polymer brushes, and discusses future research opportunities in this field. © 2013 Wiley Periodicals, Inc. J. Polym. Sci. Part B: Polym. Phys. 2014 , 52, 85–103     

High density cationic polymer brushes from combined “click chemistry” and RAFT‐mediated polymerization

A simple method for preparing cationic poly[(ar‐vinylbenzyl)trimethylammonium chloride)] [poly(VBTAC)] brushes was used by combined technology of “click chemistry” and reversible addition‐fragmentation chain transfer (RAFT) polymerization. Initially, silicon surfaces were modified with RAFT chain transfer agent by using a click reaction involving an azide‐modified silicon wafer and alkyne‐terminated 4‐cyanopentanoic acid dithiobenzoate (CPAD). A series of poly(VBTAC) brushes on silicon surface with different molecular weights, thicknesses, and grafting densities were then synthesized by RAFT‐mediated polymerization from the surface immobilized CPAD. The immobilization of CPAD on the silicon wafer and the subsequent polymer formation were characterized by X‐ray photoelectron spectroscopy, water contact angle measurements, grazing angle‐Fourier transform infrared spectroscopy, atomic force microscopy, and ellipsometry analysis. The addition of free CPAD was required for the formation of well‐defined polymer brushes, which subsequently resulted in the presence of free polymer chains in solution. The free polymer chains were isolated and used to estimate the molecular weights and polydispersity index of chains attached to the surface. In addition, by varying the polymerization time, we were able to obtain poly(VBTAC) brushes with grafting density up to 0.78 chains/nm² with homogeneous distributions of apparent needle‐like structures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

表面引发聚合反应研究进展

表面引发聚合反应作为一种新的聚合反应可广泛应用于固体基底的表面修饰与改性。结合分子自组装技术,几乎各种类型的聚合反应都有可能在固体基底表面进行。本文对表面引发聚合反应的研究进展进行了综述,对反应类型、实验方法、研究动向以及在合成聚合物刷、形成图案化聚合物薄膜等方面的应用与发展前景作了介绍与讨论。     

RAFT‐mediated synthesis of poly[(oligoethylene glycol) methyl ether acrylate] brushes for biological functions

The synthesis of poly[(oligoethylene glycol) methyl ether acrylate] [poly(OEGA)] brushes was achieved via reversible addition‐fragmentation chain transfer (RAFT) polymerization and used to selectively immobilize streptavidin proteins. Initially, gold surfaces were modified with a trithiocarbonate‐based RAFT chain transfer agent (CTA) by using an ester reaction involving a gold substrate modified with 11‐mercapto‐1‐undecanol and bis(2‐butyric acid)trithiocarbonate. poly(OEGA) brushes were then prepared via RAFT‐mediated polymerization from the surface‐immobilized CTA. The immobilization of CTA on the gold surface and the subsequent polymer formation were followed by ellipsometry, X‐ray photoelectron spectroscopy, grazing angle‐Fourier transform infrared spectroscopy, atomic force microscopy, and water contact‐angle measurements. RAFT‐mediated polymerization method gave CTA groups to grafted poly(OEGA) termini, which can be converted to various biofunctional groups. The terminal carboxylic acid groups of poly(OEGA) chains were functionalized with amine‐functionalized biotin units to provide selective attachment points for streptavidin proteins. Fluorescence microscopy measurements confirmed the successful immobilization of streptavidin molecules on the polymer brushes. It is demonstrated that this fabrication method may be successfully applied for specific protein recognition and immobilization. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Functional colloidal particles stabilized by layered silicate with hydrophilic face and hydrophobic polymer brushes

In this study, we describe a new strategy for producing narrowly dispersed functional colloidal particles stabilized by a nanocomposite with hydrophilic clay faces and hydrophobic polystyrene (PS) brushes on the edges. This method involves preparation of polymer brushes on the edges of clay layers and Pickering suspension polymerization of styrene in the presence of the nanocomposites. PS brushes on the edges of clay layers were prepared by atom transfer radical polymerization. X‐ray diffraction and thermogravimetric analysis results indicated that PS chains were grafted to the edges of clay platelets. Transmission electron microscope results showed that different morphologies of clay‐PS particles could be obtained in different solvents. In water, clay‐PS particles aggregated together, in which PS chains collapsed forming nanosized hydrophobic domains and hydrophilic clay faces stayed in aqueous phase. In toluene, clay‐PS particles formed face‐to‐face structure. Narrowly dispersed PS colloidal particles stabilized by clay‐PS were prepared by suspension polymerization. Because of the negatively charged clay particles on the surface, the zeta potential of the PS colloidal particles was negative. Positively charged poly(2‐vinyl pyridine) (P2VP) chains were adsorbed to the surface of PS colloidal particles in aqueous solution at a low pH value, and gold nanoparticles were prepared in P2VP brushes. Such colloidal particles may find important applications in a variety of fields including waterborne adhesives, paints, catalysis of chemical reactions, and protein separation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1535–1543, 2009     

刺激响应型聚合物刷的研究进展

本文综述了刺激响应型聚合物刷的研究进展,阐述了刺激响应型聚合物刷的分类、与基体表面的连接方式以及常规制备方法,介绍了离子强度、温度、pH值、光、溶剂等刺激响应型聚合物刷及其研究现状,并对相应的刺激响应机理进行了探讨。此外,本文还综述了多重刺激响应型聚合物刷的制备设计思路及其刺激响应特性,概述了聚合物刷在响应外界刺激后对基体的弯曲作用以及利用该作用进行可控三维自组装,并对刺激响应型聚合物刷的应用前景进行了展望。     

Cylindrical polymer brushes

In recent years, research on cylindrical polymer brushes (or molecular bottlebrushes) has received significant attention. In this article, we discuss various strategies for their synthesis and the unique properties arising from their regular multibranched structure. Some recent advances in the application of cylindrical polymer brushes are highlighted. Amphiphilic core– shell cylindrical polymer brushes, for example, have been successfully used as single molecular templates for inorganic nanoparticle formation. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3461–3481, 2005     

Synthesis of dual‐functional poly(6‐azidohexylmethacrylate) brushes by a RAFT agent carrying carboxylic acid end groups

Novel types of dual‐functional surface‐attached polymer brushes were developed by interface‐mediated reversible addition‐fragmentation chain transfer (RAFT) polymerization of 6‐azidohexylmethacrylate using the surface‐immobilized RAFT agent and the free initiator. The interface‐mediated RAFT polymerization produced silicon substrate coated with dual‐functional (azido groups from monomer and carboxylic acid groups from RAFT agent) poly(6‐azidohexylmethacrylate) [poly (AHMA)] with a grafting density as high as 0.59 chains/nm². Dual‐functional polymer brushes can represent an attractive chemical platform to deliberately introduce other molecular units at specific sites. The azido groups of the poly(AHMA) brushes can be modified with alkyl groups via click reaction, known for their DNA hybridization, while the carboxylic acid end groups can be reacted with amine groups via amide reaction, known for their antifouling properties. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1696–1706     

Optical probes of chain packing structure and exciton dynamics in polythiophene films,composites, and nanostructures

This mini-review on the photophysics of poly-alkyl thiophenes (e.g., P3HT) and its blends with electron-acceptor moeties such as fullerenes (e.g., PCBM) and carbon nanotubes focuses on highlights of recent literature on spectroscopic probes of exciton formation, diffusion, charge-separation, and transport in these materials. The literature in this area is vast: more than 3000 papers have been published in on P3HT (and related materials) and applications to organic solar energy harvesting devices over the last 20 years. Thus, no single review can capture the breadth and depth of this research. Here, we attempt to highlight some of the exciting new research efforts aimed at understanding photophysical processes in organic photovoltaic materials. This mini-review is organized as follows: First, a summary of the theoretical framework commonly used to describe fundamental physical processes of charge generation in organic (polymeric) semiconductor materials is presented. We then discuss recent exciting results on ultrafast spectroscopic probes of exciton dynamics in these materials. Finally, we present highlights of new research on polymer nanostructures (nanoparticles and nanofibers) and their exciting applications to organic photovoltaics. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Monte carlo simulations of polydisperse polymers grafted on spherical surfaces

This article presents effects of polydispersity in polymers grafted on spherical surfaces on grafted polymer chain conformations, grafted layer thickness, and free‐end monomer distribution within the grafted layer. At brush‐like grafting densities, as polydispersity index (PDI) increases, the scaling exponent of radius of gyration of grafted chains approaches that of a single chain grafted on the same nanoparticle, because polydispersity alleviates monomer crowding within the brush. At high PDI, the chains shorter than the number average chain length, N_n, have more compressed conformations, and the chains longer than N_n overall stretch less than in the monodisperse case. As seen in polydisperse flat brushes at high grafting densities, the grafted layer thickness on spherical nanoparticle increases with PDI. Polydispersity eliminates the region near the surface devoid of free‐end monomers seen in monodisperse cases, and it reduces the width of free‐end monomer distribution and shifts the free‐end monomer distribution close to the surface. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Determining the density profile of confined polymer brushes with neutron reflectivity

Polymer molecules at solid or fluid interfaces have an enormous spectrum of applications in a wide variety of technologies as lubricants, adhesion modifiers, and protective surface coatings. Because polymer brushes have great potential to be used in such applications, there is a need to determine their structure and efficiency in reduced spaces. Using neutron reflectivity, we have directly quantified the density distribution of opposing polymer brushes under confinement in good solvent conditions under confinement. Our measurements show that the density profile in the overlap region between opposing polymer brushes flattens, consistent with predictions from molecular-dynamics simulations. In addition, a significant increase in the density at the anchoring surfaces due to the collapse of the brush layers was observed. This collapse of the brushes in restricted geometries suggests that high-density brushes do not interpenetrate significantly under good solvent conditions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3290–3301, 2004     

A glucose sensor via stable immobilization of the GOx enzyme on an organic transistor using a polymer brush

Recently, there has been significant research in the area of organic electrochemical transistors (OECTs) because of their superior aptitude of chemical and biological sensing. Here it is shown for the first time the incorporation of polymer brushes to a transistor. Polymer brushes were chosen for their biocompatible properties and their ability to covalently tether enzymes and other biomolecules to different surfaces. OECTs were fabricated from the conducting polymer poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate), PEDOT:PSS, and polymerized from the surface a mixed polymer brush of poly(glycidyl methacrylate) and poly(2-hydroxyethyl methacrylate). The brushes were functionalized with glucose oxidase and measured in terms of electrical performance and long-term stability. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 372–377     

Efficient polymer passivation of ligand‐stripped nanocrystal surfaces

Water‐dispersible, polymer‐wrapped nanocrystals are highly sought after for use in biology and chemistry, from nanomedicine to catalysis. The hydrophobicity of their native ligand shell, however, is a significant barrier to their aqueous transfer as single particles. Ligand exchange with hydrophilic small molecules or, alternatively, wrapping over native ligands with amphiphilic polymers is widely employed for aqueous transfer; however, purification can be quite cumbersome. We report here a general two‐step method whereby reactive stripping of native ligands is first carried out using trialkyloxonium salts to reveal a bare nanocrystal surface. This is followed by chemically directed immobilization of a hydrophilic polymer coating. Polyacrylic acids, with side‐chain grafts or functional end groups, were found to be extremely versatile in this regard. The resulting polymer‐wrapped nanocrystal dispersions retained much of the compact size of their bare nanocrystal precursors, highlighting the unique role of monomer side‐chain functionality to serve as effective, conformal ligation motifs. As such, they are well poised for applications where tailored chemical functionality at the nanocrystal's periphery or improved access to their surfaces is desirable. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012