White electroluminescence from a single polymer: A blue‐emitting polyfluorene incorporating orange‐emitting benzoselenadiazole segments on its main chain

We have developed efficient white‐light‐emitting polymers through the incorporation of low‐bandgap orange‐light‐emitting benzoselenadiazole ( BSeD ) moieties into the backbone of a blue‐light‐emitting bipolar polyfluorene (PF) copolymer, which contains hole‐transporting triphenylamine and electron‐transporting oxadiazole pendent groups. By carefully controlling the concentrations of the low‐energy‐emitting species in the resulting copolymers, partial energy transfer from the blue‐fluorescent PF backbone to the orange‐fluorescent segments led to a single polymer emitting white light and exhibiting two balanced blue and orange emissions simultaneously. Efficient polymer light‐emitting devices prepared using this copolymer exhibited luminance efficiencies as high as 4.1 cd/A with color coordinates (0.30, 0.36) located in the white‐light region. Moreover, the color coordinates remained almost unchanged over a range of operating potentials. A mechanistic study revealed that energy transfer from the PF backbone to the low‐bandgap segments, rather than charge trapping, was the main operating process involved in the electroluminescence process. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2938–2946, 2007     

Molecular design of efficient white‐light‐emitting fluorene‐based copolymers by mixing singlet and triplet emission

A new strategy to realize efficient white‐light emission from a binary fluorene‐based copolymer (PF‐Phq) with the fluorene segment as a blue emitter and the iridium complex, 9‐iridium(III)bis(2‐(2‐phenyl‐quinoline‐N,C³′)(11,13‐tetradecanedionate))‐3,6‐carbazole (Phq), as a red emitter has been proposed and demonstrated. The photo‐ and electroluminescence properties of the PF‐Phq copolymers were investigated. White‐light emission with two bands of blue and red was achieved from the binary copolymers. The efficiency increased with increasing concentration of iridium complex, which resulted from its efficient phosphorescence emission and the weak phosphorescent quenching due to its lower triplet energy level than that of polyfluorene. In comparison with the binary copolymer, the efficiency and color purity of the ternary copolymers (PF‐Phq‐BT) were improved by introducing fluorescent green benzothiadiazole (BT) unit into polyfluorene backbone. This was ascribed to the exciton confinement of the benzothiadiazole unit, which allowed efficient singlet energy transfer from fluorene segment to BT unit and avoided the triplet quenching resulted from the higher triplet energy levels of phosphorescent green emitters than that of polyfluorene. The phosphorescence quenching is a key factor in the design of white light‐emitting polyfluorene with triplet emitter. It is shown that using singlet green and triplet red emitters is an efficient approach to reduce and even avoid the phosphorescence quenching in the fluorene‐based copolymers. The strategy to incorporate singlet green emitter to polyfluorene backbone and to attach triplet red species to the side chain is promising for white polymer light‐emitting diodes. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 453–463, 2008     

Improving optoelectronic properties of the 2,7‐polyfluorene derivatives with carbazole and oxadiazole pendants by incorporating the blue‐emitting iridium complex pendants in C‐9 position of fluorine unit

To study the influence of a blue‐emitting iridium complex pendant on the optoelectronic properties of its 2,7‐polyfluorene (PF) derivatives with the carbazole and oxadiazole pendants, a class of 2,7‐PF derivatives containing carbazole, oxadiazole, and/without the cyclometalated iridium complex pendants in the C‐9 positions of fluorene unit were synthesized. Their thermal, photophysical, electrochemical, and electroluminescent (EL) properties were investigated. Among these 2,7‐PF derivatives (P 1 –P 4 ), P 2 and P 3 exhibited higher photoluminescence efficiency in dichloromethane and better EL properties in the single‐emissive‐layer polymer light‐emitting devices. The highest brightness of 3888 cd/m² and the maximum current efficiency of 2.9 cd/A were obtained in the P 2 ‐ and P 3 ‐based devices, respectively. The maximum brightness and efficiency levels were 1.7 and 2.1 times, respectively, higher than the corresponding levels from the parent 2,7‐PF derivative (P 1 )‐based devices. Our work indicated that EL properties of 2,7‐PF derivatives can be improved by introducing the blue‐emitting iridium complex into the alkyl side chain of fluorine unit as pendant. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

An X‐shaped π‐conjugated polymer comprising of fluorene units and anthracene units with high efficiency. Synthesis and optical and electrochemical properties

A new X‐shaped π‐conjugated monomer comprising of fluorene units and anthracene units was synthesized, and it was used to fabricate the new X‐shaped π‐conjugated polymers and investigate the properties of the new polymers. Using different molar ratios between such monomer and a fluorene monomer gave three polymers that showed higher absolute PL quantum yields than the linear polyfluorene (PF) in the solid state. After thermal annealing at 200 °C for 4 h, the linear PF showed an additional bathochromic emission at about 550 nm, whereas such red‐shifted emission was fully eliminated for the X‐shaped polymers. The electroluminescent devices based on the X‐shaped polymers with a configuration of ITO/PEDOT:PSS/polymer/LiF/Ca/Al displayed blue emission with low turn‐on voltage and high brightness. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5616–5625, 2008     

Star‐Shaped Trinuclear Cyclometalated Platinum(II) Complexes as Single‐Component Emitters in White‐Emitting PLEDs

Two star‐shaped phosphorescent small molecules, Ph‐3FPt(pic) and 4Ph‐3FPt(pic), are single‐component emitters in polymer white‐light‐emitting diodes (WPLEDs) that are comprised of three blue–light‐emitting phosphorescent chromophores of FPt(pic) and are attached to benzene‐1,3,5‐trioxy‐ and 1,3,5‐tri(4‐oxyphenyl)benzene cores through a hexyloxy chain, respectively. Compared to their corresponding mono‐ or dinuclear platinum complexes, this class of star‐shaped homotrinuclear cyclometalated platinum(II) complexes exhibited controllable excimer emission. Stable white/near‐white emission was obtained in single‐emissive‐layer PLEDs by using the Ph‐3FPt(pic) or 4Ph‐3FPt(pic) as a single dopant and a blend of poly(vinylcarbazole) and 2‐(4‐biphenyl)‐5‐(4‐tert‐butyl‐phenyl)‐1,3,4‐oxadiazole as a host matrix at dopant concentrations of 1–4 wt. %. Our results provide an efficient way to control excimer formation and to obtain a single‐component emitter for use in WPLEDs.     

Synthesis of fluorene‐based hyperbranched polymers for solution‐processable blue,green, red,and white light‐emitting devices

For the purpose of making hyperbranched polymer (Hb‐Ps)‐based red, green, blue, and white polymer light‐emitting diodes (PLEDs), three Hb‐Ps Hb‐ terfluorene ( Hb‐TF ), Hb ‐4,7‐bis(9,9′‐dioctylfluoren‐2‐yl)‐2,1,3‐benzothiodiazole ( Hb‐BFBT ), and Hb‐ 4,7‐bis[(9,9′‐dioctylfluoren‐2‐yl)‐thien‐2‐yl]‐2,1,3‐benzothiodiazole ( Hb‐BFTBT ) were synthesized via [2+2+2] polycyclotrimerization of the corresponding diacetylene‐functionalized monomers. All the synthesized polymers showed excellent thermal stability with degradation temperature higher than 355 °C and glass transition temperatures higher than 50 °C. Photoluminance (PL) and electroluminance (EL) spectra of the polymers indicate that Hb‐TF , Hb‐BFBT , and Hb‐BFTBT are blue‐green, green, and red emitting materials. Maximum brightness of the double‐layer devices of Hb‐TF , Hb‐BFBT , and Hb‐BFTBT with the device configuration of indium tin oxide/poly(3,4‐ethylene dioxythiophene):poly(styrene sulfonate)/light‐emitting polymer/CsF/Al are 48, 42, and 29 cd/m²; the maximum luminance efficiency of the devices are 0.01, 0.02, and 0.01 cd/A. By using host–guest doped system, saturated red electrophosphorescent devices with a maximum luminance efficiency of 1.61 cd/A were obtained when Hb‐TF was used as a host material doped with Os(fptz)₂(PPh₂Me₂)₂ as a guest material. A maximum luminance efficiency of 3.39 cd/A of a red polymer light‐emitting device was also reached when Hb‐BFTBT was used as the guest in the PFO (Poly(9,9‐dioctylfluorene)) host layer. In addition, a series of efficient white devices were, which show low turn‐on voltage (3.5 V) with highest luminance efficiency of 4.98 cd/A, maximum brightness of 1185 cd/m², and the Commission Internationale de l'Eclairage (CIE) coordinates close to ideal white emission (0.33, 0.33), were prepared by using BFBT as auxiliary dopant. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Star‐like polyfluorenes based on 2,4,6,8, 10,12‐hexabenzyl‐2,4,6,8,10,12‐hexaazaisowurtzitane caged‐core: toward non‐aggregating,blue‐light‐emitting polymers

Multi‐functionality compound 2,4,6,8,10,12‐hexa(p‐bromo)‐benzyl‐2,4,6,8,10,12‐hexaazaiso‐wurtzitane (Br‐HBIW) was synthesized and used for the core of star‐like polymers. Star‐like polyfluorene based on 2,4,6,8,10,12‐hexabenzyl‐2,4,6,8,10,12‐hexaazaisowurtzitane (HBIW) caged‐core was synthesized by Suzuki coupling method. The comparative studies between the star‐like polyfluorene and the linear polyfluorene based on UV–Vis and photoluminescence (PL) spectra revealed that the bulky HBIW cage could reduce the chain aggregation and π–π interaction, so brought about improved PL quantum efficiency and annealing PL stability. Such results could be owed to the successful suppression of excimers formation, which originated from the incorporation of the HBIW cage and star‐like architecture. Copyright © 2009 John Wiley & Sons, Ltd.     

Highly efficient and stable blue‐light‐emitting binaphthol‐fluorene copolymers: A joint experimental and theoretical study of the main‐chain chirality

In a quest for the main‐chain chiral and highly stable blue‐light‐emitting π‐conjugated polymers, a novel series of soluble conjugated random and alternating copolymers (PF‐BN) derived from fluorene and axially chiral 1,1′‐binaphthol (BINOL) were successfully synthesized by Suzuki coupling polymerization. The polymer structures, optical properties, and their electrochemical properties were investigated by ¹H NMR, TGA/DSC, UV‐Vis absorption, photoluminescence, cyclic voltammetry, circular dichroism spectroscopy, and DFT calculations. The blue‐light‐emitting BINOL‐containing copolymers with proper content of BINOL show highly efficient photoluminescence and ultra highly stable light‐emission with almost unchanged fluorescent spectra after annealing at 200 °C in air for 10 h. The joint experimental and theoretical study of the main‐chain chirality reveals that (1) the chirality of BINOL can be transferred to the polymer backbone, (2) the effective conjugation length is about one BINOL and three fluorenes, (3) the main active chiral block in the copolymers is probably composed by one BINOL with the other two or three fluorenes, and (4) the dihedral angle in the PF‐BN copolymers should be larger than 105°. The incorporation of BINOL into the polyfluorene backbone is an effective way to produce highly efficient and stable blue‐light‐emitting main‐chain chiral conjugated polymer with interesting optoelectronic properties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3868–3879, 2010     

Polyfluorene containing diphenylquinoline pendants and their applications in organic light emitting diodes

We present a short, efficient synthetic route for the preparation of a novel polyfluorene copolymer (PF‐Q) containing two electron‐deficient, 2,4‐diphenylquinoline groups functionalized at the C‐9 positions of alternate fluorene units that form a three‐dimensional cardostructure. The presence of the rigid bulky pendent groups leads to a polyfluorene possessing a high glass‐transition temperature (207 °C) and very good thermal stability (5% weight loss observed at 460 °C). A photoluminescence study revealed that the Förster energy transfer from the excited quinoline groups to the polyfluorene backbone is very efficient; it also demonstrated that the commonly observed aggregate/excimer formation in polyfluorenes is suppressed very effectively in this polymer, even after it has been annealed at 150 °C for 20 h. A light emitting diode (LED) device prepared with PF‐Q as the emitting layer exhibits a stable blue emission with a maximum brightness of 1121 cd/m² at 12 V and a maximum external quantum efficiency of 0.80% at 250 cd/m². We also used PF‐Q, which contains diphenylquinoline units that behave as electron‐transporting side chains, as a host material and doped it with 2.4 wt % of a red‐emitting phosphorescent dye, Os(fppz), to realize a red electroluminescence with CIE color coordinates of (0.66, 0.34). The doped device exhibits a maximum external quantum efficiency of 6.63% (corresponding a luminance efficiency of 8.71 cd/A) at a current density of 47.8 mA/cm², together with a maximum brightness of 10457 cd/m². © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 859–869, 2005     

Synthesis,optical properties,and spectral stability of chiral dendronized binaphthyl‐containing polyfluorene derivatives

A new kind of chiral dendronized binaphthyl‐containing random polyfluorene derivatives bearing different contents (3.2–14.9 mol %) of Fréchet's polyether dendritic wedges have been designed and synthesized through a versatile Pd‐catalyzed Suzuki polycondensation. Their properties have been investigated by NMR, TGA, DSC, CD, UV–vis, and photoluminescence and compared to those of poly(9,9‐dihexylfluorene) ( PF ). It was found that attachment of Fréchet's dendritic wedges into the main chain enhanced the emission efficiency and thermal stability of the copolymers. Furthermore, different from PF , good to excellent spectral stabilities in the solid state were proven for all the dendronized chiral copolymers after a thermal annealing under air at 200 °C. The second‐generation dendronized polymer P3 bearing about 15 mol % of dendritic pendants exhibited high quantum yields in both solutions and films, and excellent thermal oxidative stability. These results demonstrated that the combination of the twisted nonplanar binaphthyl and the sterically demanding dendron could efficiently suppress the intermolecular packing and aggregation at much lower dendron contents compared to other reported dendronized polyfluorenes. Additionally, the investigation of circular dichroism spectra of these chiral dendronized polymers showed a strong Cotton effect at long wavelength (378–384 nm), indicating that the chirality of binaphthyl unit was transferred to the whole polyfluorene backbone. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 886–896, 2008     

Energy transfer and triplet exciton confinement in polymeric electrophosphorescent devices

Energy transfer and triplet exciton confinement in polymer/phosphorescent dopant systems have been investigated. Various combinations of host‐guest systems have been studied, consisting of two host polymers, poly(vinylcarbazole) (PVK) and poly[9,9‐bis(octyl)‐fluorene‐2,7‐diyl] (PF), blended with five different phosphorescent iridium complexes with different triplet energy levels. These combinations of hosts and dopants provide an ideal situation for studying the movement of triplet excitons between the host polymers and dopants. The excitons either can be confined at the dopant sites or can flow to the host polymers, subject to the relative position of the triplet energy levels of the material. For PF, because of its low triplet energy level, the exciton can flow back from the dopants to PF when the dopant has a higher triplet energy and subsequently quench the device efficiency. In contrast, efficient electrophosphorescence has been observed in doped PVK films because of the high triplet energy level of PVK. Better energy transfer from PVK to the dopants, as well as triplet exciton confinement on the dopants, leads to higher device performance than found in PF devices. Efficiencies as high as 16, 8.0, and 2.6 cd/A for green, yellow, and red emissions, respectively, can be achieved when PVK is selected as the host polymer. The results in this study show that the energy transfer and triplet exciton confinement have a pronounced influence on the device performance. In addition, this study also provides material design and selection rules for the efficient phosphorescent polymer light‐emitting diodes. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2681–2690, 2003     

Porphyrin–diindenothieno[2,3‐b]thiophene alternating copolymer—a blue‐light harvester in ternary‐blend polymer solar cells

Porphyrin, despite chosen by Nature as light harvesting units, hasn't revealed its full potentials as a structural unit in porphyrin‐incorporated polymers (PPors). A novel PPor was synthesized to investigate the origins of the low performances of PPor‐based polymer solar cells (PSCs). The polymer features broad absorption in the blue‐light region, because the diindenothieno[2,3‐b]thiophene (DITT) unit extended the conjugation in the polymer backbone. PPor‐DITT/PC₇₁BM based PSCs have a high V_oc (0.79 V). Their low J_sc and fill factor (FF) were attributed to the un‐optimized morphology, as indicated by the photoluminescence quenching and atomic force microscopy (AFM) experiments. Using PPor‐DITT as a blue‐light harvesting dopant in an amorphous host leverage the strong 400–550 nm absorption of PPor‐DITT and circumvent the difficulties in reaching optimized morphology in the PPor/PCBM thin films. An addition of 2 wt % of PPor‐DITT in ternary‐blend PSCs resulted in a 10 % increase of external quantum efficiency (EQE) in the blue‐light region. However, in a crystalline host, the dopant decreased the crystallinity of the host and led to large drops in FF and power conversion efficiencies (PCEs). The study provides an alternative route and expands the application of PPors in PSCs as a blue‐light harvester in ternary‐blend PSCs using amorphous polymers as host. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

2,3‐bis(5‐Hexylthiophen‐2‐yl)‐6,7‐bis(octyloxy)‐5,8‐di(thiophen‐2‐yl) quinoxaline: A good construction block with adjustable role in the donor‐π‐acceptor system for bulk‐heterojunction solar cells

Three 2,3‐bis(5‐hexylthiophen‐2‐yl)‐6,7‐bis(octyloxy)‐5,8‐di(thiophen‐2‐yl)‐quinoxaline ( BTTQ )‐based conjugated polymers, namely, PF‐BTTQ ( P1 ), PP‐BTTQ ( P2 ), and PDCP‐BTTQ ( P3 ), were successfully synthesized for efficient polymer solar cells (PSCs) with electron‐rich units of fluorene and dialkoxybenzene and electron‐deficient unit dicyanobenzene, respectively. All the polymers exhibited good solubility in common organic solvents and good thermal stability. Their deep‐lying HOMO energy levels enabled them good stability in the air and the relatively low HOMO energy level assured a higher open circuit potential when used in PSCs. Bulk‐heterojunction solar cells were fabricated using these copolymers blended with a fullerene derivative as an acceptor. All of them exhibited promising performance, and the best device performance with power conversion efficiency up to 3.30% was achieved under one sun of AM 1.5 solar simulator illumination (100 mW/cm²). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of a polyfluorene containing carbazole and oxadiazole dipolar pendent groups and its application to electroluminescent devices

We have synthesized a blue‐light‐emitting polyfluorene (PF) derivative ( PF‐CBZ‐OXD ) that presents bulky hole‐transporting carbazole and electron‐transporting oxadiazole pendent groups functionalized at the C‐9 positions of alternating fluorene units. The results from photoluminescence and electrochemical measurements indicate that both the side chains and the PF main chain retain their own electronic characteristics in the copolymer. An electroluminescent device incorporating this polymer as the emitting layer was turned on at 4.5 V; it exhibited a stable blue emission with a maximum external quantum efficiency of 1.1%. Moreover, we doped PF‐CBZ‐OXD and its analogue PF‐TPA‐OXD with a red‐light‐emitting iridium phosphor for use as components of phosphorescent red‐light emitters to investigate the effect of the host's HOMO energy level on the degree of charge trapping and on the electrophosphorescent efficiency. We found that spectral overlap and individual energy level matching between the host and guest were both crucial features affecting the performance of the electroluminescence devices. Atomic force microscopy measurements indicated that the dipolar nature of PF‐CBZ‐OXD , in contrast to the general nonpolarity of polydialkylfluorenes, provided a stabilizing environment that allowed homogeneous dispersion of the polar iridium triplet dopant. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2925–2937, 2007     

Synthesis and characterization of highly stable blue‐light‐emitting hyperbranched conjugated polymers

Polyfluorene homopolymer ( P1 ) and its carbazole derivatives ( P2 – P4 ) have been prepared with good yield by Suzuki coupling polymerization. P2 is an alternating copolymer based on fluorene and carbazole; P3 is a hyperbranched polymer with carbazole derivative as the core and polyfluorene as the long arms; P4 is a hyperbranched polymer with carbazole derivative as the core and the alternating fluorene and carbazole as the long arms. These polymers show highly thermal stability, and their structures and physical properties are studied using gel permeation chromatography, ¹H NMR, ¹³C NMR, elemental analysis, Fourier transform infrared spectroscopy, thermogravimetry, UV–vis absorption, photoluminescence, and cyclic voltammetry (CV). The influence of the incorporation of carbazole and the hyperbranched structures on the thermal, electrochemical, and electroluminescent properties has been investigated. Both carbazole addition and the hyperbranched structure increase the thermal and photoluminescent stability. The CV shows an increase of the HOMO energy levels for the derivatives, compared with polyfluorene homopolymer ( P1 ). The EL devices fabricated by these polymers exhibit pure blue‐light‐emitting with negligible low‐energy emission bands, indicating that the hyperbranched structure has a strong effect on the PLED characteristics. The results imply that incorporating carbazole into polyfluorene to form a hyperbranched structure is an efficient way to obtain highly stable blue‐light‐emitting conjugated polymers, and it is possible to adjust the property of light‐emitting polymers by the amount of carbazole derivative incorporated into the polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 790–802, 2008     

White Polymer Light‐Emitting Diodes Based on Star‐Shaped Polymers with an Orange Dendritic Phosphorescent Core

A series of new star‐shaped polymers with a triphenylamine‐based iridium(III) dendritic complex as the orange‐emitting core and poly(9,9‐dihexylfluorene) (PFH) chains as the blue‐emitting arms is developed towards white polymer light‐emitting diodes (WPLEDs). By fine‐tuning the content of the orange phosphor, partial energy transfer and charge trapping from the blue backbone to the orange core is realized to achieve white light emission. Single‐layer WPLEDs with the configuration of ITO (indium‐tin oxide)/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)/polymer/CsF/Al exhibit a maximum current efficiency of 1.69 cd A⁻¹ and CIE coordinates of (0.35, 0.33), which is very close to the pure white‐light point of (0.33, 0.33). To the best of our knowledge, this is the first report on star‐shaped white‐emitting single polymers that simultaneously consist of fluorescent and phosphorescent species.

     

Isolation of π‐conjugated system through polyfluorene from electronic coupling with side‐chain substituents by cardo structures

The electronic coupling via the cardo structure in polyfluorene (PFs) was investigated. The series of fluorene units alternatively having alkoxyphenyl as an electron‐donating group (EDG) and/or alkyl benzoate as an electron‐withdrawing group (EWG) at the cardo carbon were synthesized. From the investigation of optical properties of the polymers containing these fluorene units, it was found that the electronic states of the substituents at the cardo carbons and the PF main chains should be less influenced by the introduction of EDG and/or EWG at the cardo structure. Furthermore, these preservation effects in the cardo‐PFs were observed in the film states even after the thermal treatment. We conclude that the electronic structures of the PF main chain are highly preserved from the correlations with the substituents at the cardo carbons. This is the first example, to the best of our knowledge, to survey the systematic information on the electronic structures of the cardo‐PFs and offer the preservation effect of the optical properties from the introduction of EDGs and EWGs at the cardo carbon. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Bipolar copolymers comprised mesogen‐jacketed polymer containing oxadiazole units and PVK as host materials for electroluminescent devices

Nonconjugated bipolar transport polymers have been developed as host materials for electroluminescent devices by incorporating both electron‐transporting and hole‐transporting functionalities into copolymers. The random copolymer PCt‐nvk3‐7 containing mesogen‐jacketed segment of P‐Ct have been synthesized and characterized. The effect of mesogen‐jacketed segment content of these bipolar copolymers on device performance has been investigated. The results of polymer light‐emitting diodes (PLEDs) show that the jacketed content of copolymers has a significant effect on device performance: lowering charge transport and facilitating the hole‐electron recombination leads to much higher current efficiency. Applying these high triplet random copolymers as host, the maximum current efficiency of 0.70 cd/A and the maximum brightness of 1872.8 cd/m² was achieved for PCt‐nvk3‐7 with an orange‐emitting complex dopant. The results suggest that the bipolar copolymers PCt‐nvks can be good host polymers for electrophosphorescent devices. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7861–7867, 2008     

White electroluminescence from a single polyfluorene containing bis‐DCM units

A series of fluorene‐based copolymers composed of blue‐ and orange‐light‐emitting comonomers were synthesized through palladium‐catalyzed Suzuki coupling reactions. 9,9‐Dihexylfluorene and 2‐(2,6‐bis‐{2‐[1‐(9,9‐dihexyl‐9H‐fluoren‐2‐yl)‐1,2,3,4‐tetrahydroquinolin‐6‐yl]‐vinyl}‐pyran‐4‐ylidene)‐malononitrile (DCMF) were used as the blue‐ and orange‐light‐emitting chromophores, respectively. The resulting single polymers exhibited simultaneous blue (423/450 nm) and orange (580–600 nm) emissions from these two chromophores. By adjusting the fluorene and DCMF contents, white light emission could be obtained from a single polymer; a device with an ITO/PEDOT:PSS/polymer/Ca/Al configuration was found to exhibit pure white electroluminescence with Commission Internationale de L'Eclairage (CIE) coordinates of (0.33, 0.31), a maximum brightness of 1180 cd/m², and a current efficiency of 0.60 cd/A. Furthermore, the white light emission of this device was found to be very stable with respect to variation of the driving voltage. The CIE coordinates of the device were (0.32, 0.29), (0.32, 0.29), and (0.33, 0.31) for driving voltages of 7, 8, and 10 V, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3380–3390, 2007     

Synthesis and electroluminescent properties of a phenothiazine‐based polymer for nondoped polymer light‐emitting diodes with a stable orange‐red emission

A novel phenothiazine‐based polymer was synthesized through the Heck reaction of 3,7‐divinyl‐N‐octyl‐phenothiazine with 4,7‐dibromo‐2‐octylbenzotriazole according to the alternating donor–acceptor strategy. The polymer was characterized with ¹H NMR, infrared spectroscopy, gel permeation chromatography, cyclic voltammetry, ultraviolet–visible spectroscopy, and fluorescence spectroscopy. With the polymer used as an active layer, three nondoped polymer light‐emitting diodes (PLEDs) with a double‐layer configuration were fabricated by the spin‐coating approach with different thermal annealing processes. The emission maximum in electroluminescent spectra was stabilized at 616 nm. The maximum luminance reached 2432 cd/m². The coordinate value of Commission International de l'Eclairage 1931 in the double‐layer PLEDs after the thermal treatment was nearly stabilized at (x, y) =(0.62, 0.38). Additionally, the luminous efficiency of device II reached a balanceable state with an increase in the current. Therefore, the polymer had an orange‐red emission with stable chromaticity coordinates under different driving voltages. Finally, a nondoped device with a stable luminous efficiency and chromaticity was obtained. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4867–4878, 2007