Rate‐enhanced ATRP in the presence of catalytic amounts of base: An example of iron‐mediated AGET ATRP of MMA

The catalytic amount of inorganic bases (i.e., NaOH, Na₃PO₄, NaHCO₃, and Na₂CO₃) and organic bases such as pyridine and triethylamine was used as the additives in an iron‐mediated atom transfer radical polymerization with activators generated by electron transfer (AGET ATRP) of a polar monomer methyl methacrylate (MMA) using FeCl₃·6H₂O as the catalyst, ethyl 2‐bromoisobutyrate (EBiB) as the initiator, ascorbic acid (AsAc) as the reducing agent, and tetrabutylammonium bromide (TBABr) as the ligand. All these bases can result in dual enhancement of polymerization rate and controllability over molecular weight while keeping low M_w/M_n values (<1.3) for the resultant polymers. For example, the polymerization rate of AGET ATRP with a molar ratio of [MMA]₀/[EBiB]₀/[FeCl₃·6H₂O]₀/[TBABr]₀/[AsAc]₀/[NaOH]₀ = 500/1/1/2/2/1.5 using NaOH as the additives was more than two times of that without NaOH. The nature of “living”/controlled free radical polymerization in the presence of base was confirmed by chain‐extension experiments. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Iron-mediated AGET ATRP of styrene and methyl methacrylate using ascorbic acid sodium salt as reducing agent

Atom transfer radical polymerization of styrene(St) and methyl methacrylate(MMA) in bulk and in different solvents using activators generated by electron transfer(AGET ATRP) were investigated in the presence of a limited amount of air using FeCl3·6H2O as the catalyst, ascorbic acid sodium salt(AsAc-Na) as the reducing agent, and a cheap and commercially available tetrabutylammonium bromide(TBABr) as the ligand. It was found that polymerization in THF resulted in shorter induction period than that in bulk and in toluene for AGET ATRP of St, while referring to AGET ATRP of MMA, polymerization in THF showed three advantages compared with that in bulk and toluene: 1) shortening the induction period, 2) enhancing the polymerization rate and 3) having better controllability. The living features of the obtained polymers were verified by chain end analysis and chain-extension experiments.     

Iron halide mediated atom transfer radical polymerization of methyl methacrylate with N‐alkyl‐2‐pyridylmethanimine as the ligand

The controlled atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) catalyzed by iron halide/N‐(n‐hexyl)‐2‐pyridylmethanimine (NHPMI) is described. The ethyl 2‐bromoisobutyrate (EBIB)‐initiated ATRP with [MMA]₀/[EBIB]₀/[iron halide]₀/[NHPMI]₀ = 150/1/1/2 was better controlled in 2‐butanone than in p‐xylene at 90 °C. Initially added iron(III) halide improved the controllability of the reactions in terms of molecular weight control. The p‐toluenesulfonyl chloride (TsC1)‐initiated ATRP were uncontrolled with [MMA]₀/[TsC1]₀/[iron halide]₀/[NHPMI]₀ = 150/1/1/2 in 2‐butanone at 90 °C. In contrast to the EBIB‐initiated system, the initially added iron(III) halide greatly decreased the controllability of the TsC1‐initiated ATRP. The ration of iron halide to NHPMI significantly influenced the controllability of both EBIB and TsC1‐initiated ATRP systems. The ATRP with [MMA]₀/[initiator]₀/[iron halide]₀/[NHPMI]₀ = 150/1//1/2 provided polymers with PDIs ≥ 1.57, whereas those with [iron halide]₀/[NHPMI]₀ = 1 resulted in polymers with PDIs as low as 1.35. Moreover, polymers with PDIs of approximately 1.25 were obtained after their precipitation from acidified methanol. The high functionality of the halide end group in the obtained polymer was confirmed by both ¹H NMR and a chain‐extenstion reaction. Cyclic voltammetry was utilized to explain the differing catalytic behaviors of the in situ‐formed complexes by iron halide and NHPMI with different molar ratios. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4882–4894, 2004     

Iron‐mediated AGET ATRP of MMA with sulfosalicylic acid as a ligand

Iron‐mediated atom transfer radical polymerizations with activators generated by electron transfer of methyl methacrylate in N,N‐dimethylformamide solution in the presence and absence of a limited amount of air, using FeCl₃·6H₂O as the catalyst, ethyl 2‐bromoisobutyrate (EBiB) as the initiator, vitamin C as the reducing agent, and a commercially available organic acid, sulfosalicylic acid (SSA), as the ligand were investigated. Addition of SSA as the ligand could enhance the polymerization rate, and produce poly(methyl methacrylate) with controllable molecular weights and narrow molecular weight distributions (M_w/M_n = 1.30–1.50). The effect of [FeCl₃·6H₂O]₀/[SSA]₀ on the polymerization was studied by cyclic voltammetry characterization. Chain extension was performed to confirm the “living”/controlled nature of the polymerization system. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Photoirradiated Fe-Mediated AGET ATRP of Methyl Methacrylate in the Presence of Alcohol

In this study, photoirradiated Fe-mediated AGET (activators generated by electron transfer) atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) was investigated at ambient temperature in N,N-dimethylformamide (DMF) using carbon tetrachloride as initiator, FeCl₃·6H₂O/bipyridine (Bpy) as catalyst complex, and alcohol as reducing agent. Linear semi-logarithmic plot of conversion vs. time was obtained from the kinetic experiments, and the number-average molecular weight increased linearly with monomer conversion and corresponded to the theoretic values with molecular weight distributions (M_w/M_n) as low as 1.25, which agreed with the character of controlled/living polymerization. The kinds of alcohol played an important role in photoirradiated Fe-mediated AGET ATRP of MMA. The living characteristics were demonstrated through chain extension experiment. The obtained polymer was characterized by proton nuclear magnetic resonance (NMR) and gel permeation chromatography.     

Iron‐mediated AGET ATRP of methyl methacrylate in the presence of polar solvents as ligands

The polar solvents, N‐methylpyrrolidone (NMP), N,N‐dimethylformamide (DMF), and acetonitrile (CH₃CN) were used as ligands for iron(III)‐mediated activators generated by electron transfer atom transfer radical polymerizations (AGET ATRPs) of methyl methacrylate (MMA) with various initiators and reducing agents. Polymerizations were conducted with a molar ratio of [MMA]₀/[initiator]₀/[FeBr₃]₀/[reducing agent]₀ = 100:1:1:0.5 and a volume ratio of MMA/solvent = 2:1 at 60 °C to investigate the effects of initiator, solvent and reducing agent, and most of the systems showed the typical features of “living”/controlled radical polymerization. In order to get a deeper understanding of the mechanism, the amount of the reducing agent was changed to study the polymerization behavior. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1020–1027     

2‐[(Diphenylphosphino)methyl]pyridine as ligand for iron‐based atom transfer radical polymerization

2‐[(Diphenylphosphino)methyl]pyridine (DPPMP) was successfully used as a bidentate ligand in the iron‐mediated atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) with various initiators and solvents. The effect of the catalytic system on ATRP was studied systematically. Most of the polymerizations with DPPMP ligand were well controlled with a linear increase in the number‐average molecular weights (M_n) versus conversion and relatively low molecular weight distributions (M_w/M_n = 1.10–1.3) being observed throughout the reactions, and the measured molecular weights matched the predicted values. Initially added iron(III) bromide improved the controllability of the polymerization reactions in terms of molecular weight control. The ratio of ligand to metal influenced the controllability of ATRP system, and the optimum ratio was found to be 2:1. It was shown that ATRP of MMA with FeX₂/DPPMP catalytic system (X = Cl, Br) initiated by 2‐bromopropionitrile (BPN) was controlled more effectively in toluene than in polar solvents. The rate of polymerization increased with increasing the polymerization temperature and the apparent activation energy was calculated to be 56.7 KJ mol^?1. In addition, reverse ATRP of MMA was able to be successfully carried out using AIBN in toluene at 80 °C. Polymerization of styrene (St) was found to be controlled well by using the PEBr/FeBr₂/DPPMP system in DMF at 110 °C. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2922–2935, 2008     

Alumina additives for fast iron‐mediated AGET ATRP of MMA using onium salt as ligand

Three kinds of alumina (acidic, neutral, and basic Al₂O₃) were effective as additives for the control and rate enhancement of iron‐mediated AGET (activators generated by electron transfer) ATRP (atom transfer radical polymerization) of methyl methacrylate (MMA) in the presence of limited amount of air, using FeCl₃·6H₂O as the catalyst, tetrabutylammonium bromide or tetra‐n‐butylphosphonium bromide as the ligand, ethyl 2‐bromoisobutyrate as the initiator, and ascorbic acid as the reducing agent. The conversion could be up to 83.9% in the case of basic Al₂O₃ and 75.3% with neutral Al₂O₃ only in 13 h, respectively, whereas no polymer could be obtained even in 50 h without additives. The polymers obtained with neutral and basic Al₂O₃ had controlled molecular weights and low M_w/M_n values (～1.2). Tacticities of the as‐prepared PMMA in the presence of these three kinds of Al₂O₃ were consistent with that obtained from conventional free‐radical polymerization of MMA. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Air‐tolerantly surface‐initiated AGET ATRP mediated by iron catalyst from silica nanoparticles

Well‐defined polymer‐nanoparticle hybrids were prepared by a newly reported method: atom transfer radical polymerization using activators generated by electron transfer (AGET ATRP) mediated by iron catalyst. The kinetics of the surface‐initiated AGET ATRP of methyl methacrylate from the silica nanoparticles, which was mediated by FeCl₃/triphenylphosphine as a catalyst complex, ascorbic acid as a reducing agent, N,N‐dimethylformamide as the solvent in the presence of a “sacrificial” (free) initiator, was studied. Both the free and grafted polymers were grown in a control manner. The chemical composition of the nanocomposites was characterized by Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, and ¹H nuclear magnetic resonance spectroscopy. Thermogravimetric analysis was used to estimate the content of the grafted organic compound, and transmission electron micrographs was used to observe the core‐shell structure of the hybrid nanoparticles. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2006–2015, 2010     

Atom transfer radical polymerization of methyl methacrylate by copper(I)‐pyridine‐2‐carboximidate catalysts

Pyridine‐2‐carboximidates [methyl ( 1a ), ethyl ( 1b ), isopropyl ( 1c ), cyclopentyl ( 1d ), cyclohexyl ( 1e ), n‐octyl ( 1f ), and benzyl ( 1g )] were prepared from the reaction of 2‐cyanopyridine with the corresponding alcohols. Cyclopentyl‐substituted 1d was found to be a highly effective ligand for copper‐catalyzed atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA). For example, the observed rate constant for a CuBr/ 1d catalytic system was found to be nearly twice as high as the cyclohexyl‐substituted CuBr/ 1e catalytic system [k_obs = (1.19 vs 0.56) × 10^?4 s^?1). The effects of the solvents, temperature, catalyst/initiator, and solvent/monomer ratio on the ATRP of MMA were studied systematically for the CuBr/ 1d catalytic system. The optimum condition for the ATRP of MMA was found to be a 1:2:1:400 [CuBr]_o/[ 1d ]_o/[ethyl 2‐bromoisobutyrate]_o/[MMA]_o ratio at 60 °C in veratrole solution, which yielded well‐defined poly(MMA) with a narrow molecular weight distribution of 1.14. The catalytically active copper complex 2d was isolated from the reaction of CuBr with 1d . Narrow molecular weight distributions as low as 1.06 were achieved for the CuBr/ 1d catalytic system by employing 10% of the deactivator CuBr₂. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2747–2755, 2004     

Atom transfer radical polymerization of 6‐O‐methacryloyl‐1,2;3,4‐di‐O‐isopropylidene‐D‐galactopyranose in solution

A detailed exploration of the atom transfer radical polymerization (ATRP) of a sugar‐carrying monomer, 6‐O‐methacryloyl‐1,2;3,4‐di‐O‐isopropylidene‐D‐galactopyranose (MAIPGal) was performed. The factors pertinent to ATRP, such as initiators, ligands, catalysts, and temperature were optimized to obtain good control over the polymerization. The kinetics were examined in detail when the polymerization was initiated by methyl 2‐bromoisopropionate (2‐MBP), ethyl 2‐bromoisobutyrate (2‐EBiB), or a macroinitiator, [α‐(2‐bromoisobutyrylate)‐ω‐methyl PEO] (PEO–Br), with bipyridine (bipy) as the ligand at 60 °C or by 2‐EiBB with N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as the ligand at room temperature (23 °C). The effects of the catalysts (CuBr and CuCl) were also investigated. We demonstrate that the successful ATRP of MAIPGal can be achieved for 2‐EBiB/CuBr/bipy and 2‐MBP/CuCl/bipy at 60 °C and for 2‐EBiB/CuBr/PMDETA at room temperature. The initiation by 2‐EBiB at room temperature with PMDETA as the ligand should be the most optimum operation for its moderate condition and suppression of many side reactions. Chain extension of P(MAIPGal) prepared by ATRP with methyl methacrylate (MMA) as the second monomer was carried out and a diblock copolymer, P(MAIPGal)‐b‐PMMA, was obtained. Functional polymers, poly(D‐galactose 6‐methacrylate) (PGMA), PEO‐b‐PGMA, and PGMA‐b‐PMMA were obtained after removal of the protecting groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 752–762, 2005     

Basic ionic liquid/FeCl3·6H2O as an efficient catalyst for AGET ATRP of methyl methacrylate

A basic ionic liquid, 1‐butyl‐3‐methyl imidazolium hydroxide ([Bmim]OH), was synthesized and used as the additives in an iron‐mediated atom transfer radical polymerization with activators generated by electron transfer (AGET ATRP) of methyl methacrylate in bulk and solution, using FeCl₃ · 6H₂O as the catalyst, ethyl 2‐bromoisobutyrate as the initiator, vitamin C (Vc) as the reducing agent, and tetrabutylammonium bromide or tetra‐n‐butylphosphonium bromide as the ligand. Catalytic amount of [Bmim]OH could enhance the polymerization rate and produce poly(methyl methacrylate) with controllable molecular weights and narrow molecular weight distributions (M_w/M_n = 1.3–1.4). The nature of controlled/“living” free radical polymerization in the presence of basic ionic liquid was further confirmed by chain‐extension experiments. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of well‐defined ABC‐type triblock copolymers via atom transfer radical polymerization and stable free‐radical polymerization

An asymmetric difunctional initiator 2‐phenyl‐2‐[(2,2,6,6 tetramethylpiperidino)oxy] ethyl 2‐bromo propanoate ( 1 ) was used for the synthesis of ABC‐type methyl methacrylate (MMA)‐tert‐butylacrylate (tBA)‐styrene (St) triblock copolymers via a combination of atom transfer radical polymerization (ATRP) and stable free‐radical polymerization (SFRP). The ATRP‐ATRP‐SFRP or SFRP‐ATRP‐ATRP route led to ABC‐type triblock copolymers with controlled molecular weight and moderate polydispersity (M_w/M_n < 1.35). The block copolymers were characterized by gel permeation chromatography and ¹H NMR. The retaining chain‐end functionality and the applying halide exchange afforded high blocking efficiency as well as maintained control over entire routes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2025–2032, 2002     

Monomode Microwave‐Assisted Atom Transfer Radical Polymerization

Summary: The first monomode microwave‐assisted atom transfer radical polymerization (ATRP) is reported. The ATRP of methyl methacrylate was successfully performed with microwave heating, which was well controlled and provided almost the same results as experiments with conventional heating, demonstrating the absence of any “microwave effect” in ATRP (in contrast to several literature reports). Furthermore, we found that the main advantage of the microwave‐assisted reactions over conventional reactions, i.e., a significant increase of reaction rates, only had its limited application in ATRP, even in very slow ATRP systems with high targeted molecular weights.

Comparison of the kinetic plots of the ATRP of MMA ([MMA]₀/[EBIB]₀/[CuCl]₀/[NHPMI]₀ = 200:1:1:3, MMA/DMF = 1:1 v/v) carried out at 90 °C in DMF with microwave (▴) and conventional heating (•), respectively.     

Synthesis of well‐defined syndiotactic poly(methyl methacrylate) with low‐temperature atom transfer radical polymerization in fluoroalcohol

The copper‐mediated atom transfer radical polymerization of methyl methacrylate (MMA) in 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) was studied to simultaneously control the molecular weight and tacticity. The polymerization using tris[2‐(dimethylamino)ethyl]amine (Me₆TREN) as a ligand was performed even at ?78°C with a number‐average molecular weight (M_n) of 13,400 and a polydispersity (weight‐average molecular weight/number‐average molecular weight) of 1.31, although the measured M_n's were much higher than the theoretical ones. The addition of copper(II) bromide (CuBr₂) apparently affected the early stage of the polymerization; that is, the polymerization could proceed in a controlled manner under the condition of [MMA]₀/[methyl α‐bromoisobutyrate]₀/[CuBr]₀/[CuBr₂]₀/[Me₆TREN]₀ = 200/1/1/0.2/1.2 at ?20°C with an MMA/HFIP ratio of 1/4 (v/v). For the field desorption mass spectrum of Cu^IBr/Me₆TREN in HFIP, there were [Cu(Me₆TREN)Br]⁺ and [Cu(Me₆TREN)OCH(CF₃)₂]⁺, indicating that HFIP should coordinate to the Cu^I/Me₆TREN complex. The syndiotacticity of the obtained poly(methyl methacrylate)s increased with the decreasing polymerization temperature; the racemo content was 84% for ?78°C, 77% for ?30°C, 75% for ?20°C, and 63% for 30°C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1436–1446, 2006     

Experimental Design and Statistical Analysis of AGET ATRP of MMA in Emulsion Polymer Reactor

This study investigates atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) using activators generated by electron transfer (AGET) as the initiation technique in an emulsion well‐mixed 2L stirred tank reactor. The performance of the AGET ATRP of MMA is analyzed for five key independent variables, namely temperature, catalyst complex (CuBr2/dNbpy), initiator (EBiB), reducing agent (ascorbic acid), and surfactant (Brij 98). The reaction is carried out based on a two‐step polymerization procedure. A resolution 5 fractional factorial design technique is employed to assess the influence of the five independent variables on the monomer conversion, polymer average molecular weights, and polydispersity index (PDI). An input–output model is constructed from the data of 21 designed experimental tests. A statistical analysis of the results shows that the temperature is the most influential variable for the three output process responses. The initiator strongly affects the poly(methyl methacrylate) (PMMA) molecular weights. It is the least important key variable affecting MMA conversion and PDI, and the surfactant is the least one affecting PMMA Mn. On assessing the independent interactions effect, the interactions of temperature‐surfactant on conversion, and temperature‐initiator for PMMA M_n are considered. Process simulation in 3D mapping has demonstrated that model predictions agree well with experimental data.     

Atom transfer radical polymerization of methyl methacrylate catalyzed by ion exchange resin immobilized Co(II) hybrid catalyst

Ion exchange resin immobilized Co(II) catalyst with a small amount of soluble CuCl₂/Me₆TREN catalyst was successfully applied to atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in DMF. Using this catalyst, a high conversion of MMA (>90%) was achieved. And poly(methyl methacrylate) (PMMA) with predicted molecular weight and narrow molecular weight distribution (M_w/M_n = 1.09–1.42) was obtained. The immobilized catalyst can be easily separated from the polymerization system by simple centrifugation after polymerization, resulting in the concentration of transition metal residues in polymer product was as low as 10 ppm. Both main catalytic activity and good controllability over the polymerization were retained by the recycled catalyst without any regeneration process. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1416–1426, 2008     

Atom transfer radical copolymerization of acrylonitrile and ethyl methacrylate at ambient temperature

Copolymerization of acrylonitrile (AN) and ethyl methacrylate (EMA) using copper‐based atom transfer radical polymerization (ATRP) at ambient temperature (30 °C) using various initiators has been investigated with the aim of achieving control over molecular weight distribution. The effect of variation of concentration of the initiator, ligand, catalyst, and temperature on the molecular weight distribution and kinetics were investigated. No polymerization at ambient temperature was observed with N,N,N′,N′,N″‐pentamethyldiethylenetriamine (PMDETA) ligand. The rate of polymerization exhibited 0.86 order dependence with respect to 2‐bromopropionitrile (BPN) initiator. The first‐order kinetics was observed using BPN as initiator, while curvature in first‐order kinetic plot was obtained for ethyl 2‐bromoisobutyrate (EBiB) and methyl 2‐bromopropionate (MBP), indicating that termination was taking place. Successful polymerization was also achieved with catalyst concentrations of 25 and 10% relative to initiator without loss of control over polymerization. The optimum [bpy]₀/[CuBr]₀ molar ratio for the copolymerization of AN and EMA through ATRP was found to be 3/1. For three different in‐feed ratios, the variation of copolymer composition (F_AN) with conversion indicated toward the synthesis of copolymers having slight changes in composition with conversion. The high chain‐end functionality of the synthesized AN‐EMA copolymers was verified by further chain extension with methyl acrylate and styrene. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1975–1984, 2006     

Iron(III)‐mediated AGET ATRP of styrene using tris(3,6‐dioxaheptyl)amine as a ligand

A commercially available tris(3,6‐dioxaheptyl)amine (TDA‐1) was used as a novel ligand for activator generated by electron transfer atom transfer radical polymerization (AGET ATRP) of styrene in bulk or solution mediated by iron(III) catalyst in the presence of a limited amount of air. FeCl₃ · 6H₂O and (1‐bromoethyl)benzene (PEBr) were used as the catalyst and initiator, respectively; and environmentally benign ascorbic acid (VC) was used as the reducing agent. The polymerizations show the features of “living”/controlled free‐radical polymerizations and well‐defined polystyrenes with molecular weight M_n = 2400–36,500 g/mol and narrow polydispersity (M_w/M_n = 1.11–1.29) were obtained. The “living” feature of the obtained polymer was further confirmed by a chain‐extension experiment. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2002–2008, 2009     

Reverse atom transfer radical solution polymerization of methyl methacrylate under pulsed microwave irradiation

The reverse atom transfer radical polymerization (RATRP) of methyl methacrylate (MMA) was successfully carried out under pulsed microwave irradiation (PMI) at 69 °C with N,N‐dimethylformamide as a solvent and with azobisisobutyronitrile (AIBN)/CuBr₂/tetramethylethylenediamine as an initiation system. PMI resulted in a significant increase in the polymerization rate of RATRP. A 10.5% conversion for a polymer with a number‐average molecular weight of 34,500 and a polydispersity index of 1.23 was obtained under PMI with a mean power of 4.5 W in only 52 min, but 103 min was needed under a conventional heating process (CH) to reach a 8.3% conversion under identical conditions. At different [MMA]₀/[AIBN]₀ molar ratios, the apparent rate constant of polymerization under PMI was 1.5–2.3 times larger than that under CH. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3823–3834, 2002