Conductivity, calorimetry and phase diagram of the NaHSO4–KHSO4 system

Physico-chemical properties of the binary system NaHSO₄–KHSO₄ were studied by calorimetry and conductivity. The enthalpy of mixing has been measured at 505 K in the full composition range and the phase diagram calculated. The phase diagram has also been constructed from phase transition temperatures obtained by conductivity for 10 different compositions and by differential thermal analysis. The phase diagram is of the simple eutectic type, where the eutectic is found to have the composition X(KHSO₄) = 0.44 (melting point ≈ 406 K). The conductivities in the liquid region have been fitted to polynomials of the form κ(X) = A(X) + B(X)(T − T_m) + C(X)(T − T_m)², where T_m is the intermediate temperature of the measured temperature range and X, the mole fraction of KHSO₄. The possible role of this binary system as a catalyst solvent is also discussed.     

The pseudogap in LSCO-type high-temperature superconductors as seen by neutron crystal-field spectroscopy

We studied the isotope, pressure and doping effects on the pseudogap temperature T^* by neutron spectroscopic experiments of the relaxation rate of crystal-field excitations in La_1.96−xSr_xHo_0.04CuO₄ (x = 0.11, 0.15, 0.20, 0.25) on the high-resolution time-of-flight spectrometer FOCUS at SINQ, PSI. We found clear evidence for the opening of a pseudogap in the underdoped regime at T^*(x = 0.11) = (82.2 ± 1.2) K as well as in the overdoped and the heavily overdoped compounds at T^*(x = 0.2) = (49.2 ± 0.7) K and at T^*(x = 0.25) = (46.5 ± 0.5) K, respectively. Furthermore, we investigated the effect of oxygen isotope substitution on the pseudogap, the experiments revealed ΔT^*(x = 0.11) = (21.3 ± 5.2) K and ΔT^*(x = 0.2) = (4.5 ± 1.3) K. The application of hydrostatic pressure (0.8 and 1.2 GPa) on the optimally doped compound (x = 0.15) results in a downward shift of dT^*/dp = (−5.9 ± 1.6) K/GPa.     

Crystalline polysilicate magadiite with intercalated n-alkylmonoamine and some correlations involving thermochemical data

Synthesized hydrated lamellar acidic crystalline magadiite (H₂Si₁₄O₂₉·2H₂O) nanocompound was used as host for intercalation of polar n-alkylmonoamine molecules of the general formula H₃C(CH₂)_nNH₂ (n = 1–6) in aqueous solution. The original interlayer distance (d) of 1500 pm, determined by X-ray powder diffraction patterns, increases after intercalation. The values correlated with the number of aliphatic amine carbon (n_c) atoms: d = [(1312 ± 11) + (21 ± 2)]n_c. The amount of intercalated amines (N_s), decreased as n_c increased: N_s = [(5.82 ± 0.04) − (0.45 ± 0.01)]n_c. The acidic layered nanocompound was calorimetrically titrated with the amines and the thermodynamic data gave exothermic values for all guest molecules, as shown by the correlation: Δ_intH = −[(24.45 ± 0.49) − (1.91 ± 0.10)]n_c and d = [(1576 ± 16) − (10.8 ± 1.0)]Δ_intH. The negative values of the Gibbs energies and the positive entropies also presented the correlations: Δ_intG = −[(22.8 ± 0.2) − (0.2 ± 0.1)]n_c and Δ_intS = [(6 ± 1) + (5 ± 1)]n_c, respectively.     

Interaction of sodium cholate with dioctadecyldimethylammonium chloride vesicles in aqueous dispersion

Mixtures of dioctadecyldimethylammonium chloride (DODAC) cationic vesicle dispersions with aqueous micelle solutions of the anionic sodium cholate (NaC) were investigated by differential scanning calorimetry, DSC, turbidity and light scattering. Within the concentration range investigated (constant 1.0 mM DODAC and varying NaC concentration up to 4 mM), vesicle → micelle → aggregate transitions were observed. The turbidity of DODAC/NaC/water depends on time and NaC/DODAB molar concentration ratio R. At equilibrium, turbidity initially decreases smoothly with R to a low value (owing to the vesicle–micelle transition) when R = 0.5–0.8 and then increases steeply to a high value (owing to the micelle–aggregate transition) when R = 0.9–1.0. DSC thermograms exhibit a single and sharp endothermic peak at T_m ≈ 49 °C, characteristic of the melting temperature of neat DODAC vesicles in water. Upon addition of NaC, T_m initially decreases to vanish around R = 0.5, and the main transition peak broadens as R increases. For R > 1.0 two new (endo- and exothermic) peaks appear at lower temperatures indicating the formation of large aggregates since the dispersion is turbid. All samples are non-birefringent. Dynamic light scattering (DLS) data indicate that both DODAC and DODAC/NaC dispersions are highly polydisperse, and that the mean size of the aggregates tends to decrease as R increases.     

Performance of Pt/SnO2 catalyst in the gas phase hydrogenation of crotonaldehyde

Selective hydrogenation of crotonaldehyde was performed on 5% Pt/SnO₂ catalysts, in gaseous phase, at atmospheric pressure, at 353 K. Two types of catalyst were prepared using H₂PtCl₆ and Pt(NH₃)₄(NO₃)₂ as metallic precursors. Their performances were compared as a function of the reduction temperature and both catalysts were characterised by X-ray diffraction after different reduction treatments. Using the ex-chloride catalyst, the selectivity values to the unsaturated alcohol (UOL) resulted into a maximum of 45% while a selectivity as high as 70–77%, in 0–25% conversion range, was achieved by using ex-nitrate catalyst reduced at 443 K. The formation of Pt–Sn alloy on the metal particles of platinum was thought to be necessary to improve the activity and the selectivity on these catalysts. In the contrast, a presence of PtSn₂ formed at a reduction temperature higher than 473 K led to a decrease of activity and selectivity.     

Kinetic investigation of electronic energy transfer processes following the pulsed dye-laser generation of excited atomic barium, Ba[6s6p(P1)], in the presence of atomic strontium

The collisional behaviour of Ba[6s5d(³D_J)], 1.151 eV above the 6s²(¹S₀) electronic ground state, in the presence of atomic strontium, has been investigated in the ‘long-time domain' (ca. 100 μs–1 ms) following the pulsed dye-laser excitation of barium vapour at elevated temperature at λ = 553.5 nm (Ba[6s6p(¹P₁)] ← Ba[6s²(¹S₀)]. Ba(³D_J) is subsequently produced from the short-lived ¹P₁ state (τ_e = 8.37 ± 0.38 ns) by a number of radiative and collisional processes. It may then be monitored in the ‘long-time domain' by atomic spectroscopic marker methods involving either collisional activation of Ba(³D_J) by Ba(¹S₀) and He buffer gas to yield Ba[6s6p(³P_J)] with subsequent emission from the ³P₁ state (τ_e = 1.2 ± 0.1 μs): Ba[6s6p(³P₁)] → Ba[6s²(¹S₀)] + hv (λ = 791.1 nm). Alternatively, emission from Ba(¹P₁) may be monitored at long times following the generation of this short-lived state by energy pooling following self-annihilation of Ba(³D_J) + Ba(³D_J) from Ba[6s6p(¹P₁)] → Ba[6s²(¹S₀)] + hv (λ = 553.5 nm). The generation of Ba(³D_J) in the presence of atomic strontium yields emission in the long-time domain from Sr[5s5p(³P₁)] (τ_e = 19.6 μs): Sr[5s5p(³P₁)] → Sr[5s²(¹S₀)]  + hv (λ = 689.3 nm). Whilst the decay profiles at short times are complex in form, at long times all these atomic profiles show first-order kinetic removal with the decay coefficients for λ = 791.1 nm, 689.3 nm and 553.5 nm emissions in the ratio 1 : 2 : 2, consistent with overall third-order activation of the form: Ba(³D_J) + Ba(³D_J) + Sr(¹S₀) → Sr(³P_J) + 2Ba(¹S₀). The mechanism is modelled in detail, including measurement of integrated emission intensities, yielding kinetic data for fundamental collisional processes. The overall rate constant for the third-order collisional activation of Sr[5s5p(³P_J])from 2Ba[6s5d(³D_J)] + Sr[5s²(¹S₀)] takes the upper limit of 5.8 × 10⁻²⁷ cm⁶ atom⁻² s⁻¹ (T = 900 K). The rate constant for the two body collisional quenching of Ba[6s5d(³D_J)] by ground state atomic strontium, Sr[5s²(¹S₀)], is found to be (2.0 ± 0.1) × 10⁻¹² cm³ atom⁻¹ s⁻¹ (T = 900 K).     

Refined heat capacity of LaPO4 in the temperature range 0–1600 K

In the present work temperature dependence of heat capacity of cesium tantalum tungsten oxide has been measured first in the range from 7 to 350 K and then between 330 and 630 K, respectively, by precision adiabatic vacuum and dynamic calorimetry. The experimental data were used to calculate standard thermodynamic functions, namely the heat capacity C_p° (T), enthalpy H°(T) − H°(0), entropy S°(T) − S°(0) and Gibbs function G°(T) − H°(0), for the range from T → 0 to 630 K. The structure of CsTaWO₆ is refined by the Rietveld method: space group F d3m, Z = 8, a = 10.3793(2) Å, V = 1118.14(4) Å³. The high-temperature X-ray diffraction was used for the determination of temperature of phase transition and coefficient of thermal expansion.     

Synthesis, structure and oxygen nonstoichiometry of La0.4Sr0.6Co1−yFeyO3−δ

The samples of La_0.4Sr_0.6Co_1−yFe_yO_3−δ (y = 0.2 and 0.4) were prepared using both conventional ceramic technique and nitrate–citrate precursors technique. The phase identification was made by X-ray diffraction method. The refinement of structural parameters from the XRD and neutron diffraction measurements was performed by full profile Rietveld analysis. Neutron diffraction showed that both samples possess distorted perovskite-type structure. Oxygen nonstoichiometry was measured by chemical analysis and thermogravimetry (TG) analysis in the range 20 ≤ T/°C ≤ 900 and 2E-5 ≤ pO₂/atm ≤ 4E-1. TG-experiments indicate a relatively fast and reversible oxygen exchange at pO₂ > 1E-2 atm. Mass saturation occurs at T < 300 °C upon cooling. The absolute value of oxygen nonstoichiometry was determined by iodometric titration measurements. It was found that both samples have practically stoichiometric composition at 300 °C in air and δ increases with increasing temperature and decreasing oxygen partial pressure.     

Crystal structure and chemical bonding in tin(II) acetate

Tin(II) acetate was prepared and its crystal structure was solved from X-ray powder diffraction data. Tin(II) acetate adopts a polymeric structure consisting of infinite Sn(CH₃COO)₂ chains running along the c-axis which are packed into groups of four. The acetate groups bridge the Sn atoms along the chains. The Sn atoms are asymmetrically surrounded by four oxygen atoms with two short Sn–O distances (2.170(6), 2.207(6) Å) and two longer ones (2.293(7), 2.372(8) Å). The coordination environment of the Sn atoms is completed up to a strongly distorted trigonal bipyramid SnO₄E by the sterically active lone electron pair E. The coordination environment of the Sn atoms is virtually identical for Sn(CH₃COO)₂ in the gaseous and solid phase: the two short Sn–O bonds and the lone electron pair are located in the equatorial plane of the trigonal bipyramid and the two longer Sn–O bonds are directed towards the apical vertexes. Localization of the lone electron pair on Sn(II) was confirmed by electron localization function (ELF) analysis. The polymeric nature of the tin(II) acetate crystal structure was confirmed by a MALDI-TOF experiment.     

Three interpenetrated frameworks constructed by long flexible N,N′-bipyridyl and dicarboxylate ligands

Three interpenetrated polymeric networks, {[Co(bpp)(OH-BDC)] · H₂O}_n (1) [Ni(bpp)_1.5(H₂O)(OH-BDC)]_n (2) and {[Cd(bpp)(H₂O)(OH-BDC)] · 2H₂O}_n (3), have been prepared by hydrothermal reactions of 1,3-bis(4-pyridyl)propane (bpp), 5-hydroxyisophthalic acid (OH-H₂BDC), with Co(NO₃)₂ · 6H₂O, Ni(NO₃)₂ · 6H₂O and Cd(NO₃)₂ · 4H₂O, respectively. Single-crystal X-ray diffraction analyses reveal that the three compounds all exhibit interpenetrated but entirely different structures. Compound 1 is a fourfold interpenetrated adamantanoid structure with water molecules as space fillers, in which bpp adopts a TG conformation (T = trans, G = gauche). Compound 2 is an interdigitated structure from the interpenetrated long arms of one-dimensional molecular ladders, while bpp in 2 adopts both TT and TG conformations. Compound 3 is a twofold interpenetrated three-dimensional network from a one-dimensional metal-carboxylate chain bridged by TG conformational bpp. The hydrogen bonding interactions in 1–3 further stabilize the whole structural frameworks and play critical roles in their constructions.     

Synthesis and thermodynamic properties of a metal-organic framework: [LaCu6(μ-OH)3(Gly)6im6](ClO4)6

A metal-organic complex, which has the potential property of absorbing gases, [LaCu₆(μ-OH)₃(Gly)₆im₆](ClO₄)₆ was synthesized through the self-assembly of La³⁺, Cu²⁺, glycine (Gly) and imidazole (Im) in aqueous solution and characterized by IR, element analysis and powder XRD. The molar heat capacity, C_p,m, was measured from T = 80 to 390 K with an automated adiabatic calorimeter. The thermodynamic functions [H_T − H_298.15] and [S_T − S_298.15] were derived from the heat capacity data with temperature interval of 5 K. The thermal stability of the complex was investigated by differential scanning calorimetry (DSC).     

Synthesis and low temperature fluorination of the alkaline-earth palladates Ba2−xSrxPdO3 (x = 0–2)

Since the discovery of superconductivity in Sr₂CuO₂F_2+δ there has been an increased interest in ternary oxide-fluorides. Sr₂CuO₂F_2+δ is prepared via low temperature (T = 220 °C) reaction routes. Low temperature fluorination induces an interesting structural rearrangement in the parent compound Sr₂CuO₃, which is a one-dimensional material containing linear chains of vertex sharing CuO₄ squares along the crystallographic b axis. Upon fluorination, one oxide is substituted by two fluorides and Cu²⁺ becomes octahedrally coordinated by four oxides and two fluorides. The fluorinated compound Sr₂CuO₂F_2+δ displays the T-type structure (La₂CuO₄). Insertion of excess fluorine, δ, also takes place and this fluorine occupies interstitial sites in the T structure. Although the starting material Ca₂CuO₃ is isostructural to Sr₂CuO₃, Ca₂CuO₂F_2+δ displays the T′ (Nd₂CuO₄) structure due to the smaller radius of Ca²⁺ compared to that of Sr²⁺.

The alkaline-earth palladates with the general formula A₂PdO₃ (A = Ba, Sr) are isostructural with the A₂CuO₃(A = Ca, Sr) materials. We prepared the Ba_2−xSr_xPdO₃ (x = 0–2) series and performed low temperature fluorination, which led to the synthesis of the series Ba_2−xSr_xPdO₂F_2+δ (0 ≤ x ≤ 1.5). All the compounds in the Ba_2−xSr_xPdO₂F_2+δ series show T′ structure (Ca₂CuO₂F_2+δ). Similarities and differences with Sr₂CuO₂F_2+δ and Ca₂CuO₂F_2+δ will be discussed.     

Bi2Sn2O7 nanoparticles attached to SnO2 nanowires and used as catalysts

We introduce a simple method of synthesizing SnO₂ nanowire-Bi₂Sn₂O₇ nanoparticle composites based on the principle that SnO₂ nanowires can be grown by using Bi as catalysts. A mixture of Bi and Sn powders was thermally evaporated, and the effects of growth temperature on the morphology and structure of the products were investigated. We obtained Bi₂Sn₂O₇-tipped SnO₂ nanowires at 700 °C through a vapor–liquid–solid (VLS) process, whereas particle-free SnO₂ nanowires were produced at higher temperatures. We have investigated the oxygen sensing properties of the as-synthesized product.     

Study of CCl3F hydrate formation and dissociation in W/O emulsion by differential scanning calorimetry and X-ray diffraction

Differential scanning calorimetry (DSC) and time-resolved synchrotron X-ray diffraction as a function of temperature (XRDT) were combined in a novel way in order to study conditions of formation and the amount of gas clathrate formed in dispersed systems. The formation and dissociation of trichlorofluoromethane hydrate CCl₃F·(H₂O)₁₇ in a water-in-oil emulsion were followed by using these combined techniques. An emulsion containing 3 wt.% NaCl was submitted to a cooling and heating cycle between 20 and −50 °C. During cooling, a single exothermic peak at −43 °C, found in DCS thermograms was assigned to the freezing of under-cooled water droplets; however, no noticeable signal related to hydrate crystallisation was detected. Conversely, during subsequent heating, the progressive melting of ice was followed by an endothermic signal indicative of hydrate decomposition. From X-ray diffraction performed on an emulsion sample, it was possible to identify the exact condition of CCl₃F·(H₂O)₁₇ formation. XRDT diffraction patterns clearly demonstrated that only ice crystallised in the aqueous droplets during cooling and that the hydrate only formed during heating simultaneously with melting of ice. From the solid–liquid phase diagrams of systems H₂ONaCl and CCl₃FH₂ONaCl and from the DSC and XRDT experiments, the composition of the droplets was deduced. The upper limit of the amount of hydrate that could form in the system was calculated.     

Heat capacity, enthalpy and entropy of strontium bismuth niobate and strontium bismuth tantalate

The heat capacities and enthalpy increments of strontium bismuth niobate SrBi₂Nb₂O₉ (SBN) and strontium bismuth tantalate SrBi₂Ta₂O₉ (SBT) were measured by the relaxation method (2–150 K), Calvet-type heat-conduction calorimetry (305–570 K) and drop calorimetry (773–1373 K). The temperature dependences of non-transition heat capacities in the form C_pm = 324.47 + 0.06371T − 5.0755 × 10⁶/T² J K⁻¹ mol⁻¹ (298–1400 K) and C_pm = 320.22 + 0.06451T − 4.7001 × 10⁶/T² J K⁻¹ mol⁻¹ (298–1400 K) were derived for SBN and SBT, respectively, by the least-squares method from the experimental data. Furthermore, the standard molar entropies at 298.15 K S_m°(SBN)=327.15±0.80 and S_m°(SBT)=339.23±0.72 J K⁻¹ mol⁻¹ were evaluated from the low-temperature heat capacity measurements.     

Comparative characteristics of texture and properties of hybrid organic–inorganic adsorbents functionalized by amine and thiol groups

The structure and texture characteristics of the hybrid organic–inorganic adsorbents, which were obtained by using of two-component systems of “structure-forming agent/trifunctional silane”, are compared as follows: the first component is Si(OC₂H₅)₄ or (C₂H₅O)₃Si–A–Si(OC₂H₅)₃, where A = –(CH₂)₂– or –C₆H₄–; the second one is alkoxysilane with amine (–NH₂, NH, –NH(CH₂)₂NH₂) and thiol (–SH) groups. The adsorbents, derived from TEOS, have more accessible functional groups (2.6–4.2 mmol/g) than xerogels, which are based on bis(triethoxysilanes) (1.0–2.6 mmol/g). On another hand xerogels derived from bis(triethoxysilanes) have a more extended porous structure (S_sp =516–968 m²/g, V_s = 0.418–1.490 cm³/g, d = 2.5–15.0 nm) than those that are based on TEOS (S_sp = 4–631 m²/g, V_s = 0.005–1.382 cm³/g, d = 2.3–17.7 nm). The geometric dimensions of functional groups have a more essential effect on the parameters of porous structure in the case of TEOS-derived xerogels. Using solid-state NMR spectroscopy, it has been shown that in synthesis of xerogels with the use of TEOS, the molecular frame of globules is formed by structural units Qⁿ (n = 2,3,4), and the functional groups exist as structural units of Tⁿ (n = 2,3). The xerogels obtained with using bis(triethoxysilanes) consist only of structural units of Tⁿ-type (n = 1,2,3).     

Phase separation and disorder in half metallic ferromagnetic manganite thin films: A theoretical study looking forward low noise nano-devices

The resistivity of thin La_0.7Sr_0.3MnO₃ films was first investigated in a wide temperature (T) range (10–750 K). Films grown by different techniques and on several substrates enabled to analyze samples with different amounts of disorder. The aim of this work was to elucidate the nature of the metal–insulator (M–I) transition occurring at T = T_p in these films and its relation with the different kinds of inhomogeneities they could present like intrinsic electric disorder and co-existence of two different electrical and/or magnetic phases. The low-temperature resistivity state was described mostly by a law which scales as T with  ≈ 2.5. This supports the theoretical proposal of single magnon scattering in presence of minority spin states localized by the disorder. In the whole range of temperatures the experimental data are found to be consistent with a phase separation (PS) scenario. In order to go through the origin of the characteristic length scale of inhomogeneity found, preliminarily low frequency noise measurements as a function of T in a range of temperature around the M–I transition were made. The samples used were patterned using photolithography into bridges with various widths and lengths. No clear sign of separation phase dynamic has been observed in our noise measurements. Unexpectedly the normalized Hooge parameter _H/n was found not to be volume (Ω) independent. The LSMO electrical properties may strongly be driven by disorder and new design for magnetoresistance sensors may have to take into account their intrinsic PS.     

Constructions of a set of novel hydrogen-bonded supramolecules from reactions of cobalt(II) salt with bis(3,5-dimethylpyrazolyl)methane and different carboxylic acids

Reactions of CoX₂·6H₂O (X = Cl⁻, ClO₄⁻) with bis(3,5-dimethylpyrazolyl)methane (dmpzm) and formic acid, acetic acid, benzoic acid, salicylic acid, maleic acid, or fumaric acid under the presence of KOH solution produced a new family of Co(II)/dmpzm complexes, [Co(dmpzm)₂L]X·nH₂O (1: L = O₂CH, X = Cl, n = 2; 2: L = OAc, X = Cl, n = 3; 3: L = benzoate, X = ClO₄, n = 1/3; 4: L = salicylate, X = ClO₄, n = 1/3) and [Co₂(dmpzm)₄L](ClO₄)₂·nSolv (5: L = maleate, n = 3, Solv = H₂O; 6: L = fumarate, n = 2, Solv = MeOH). These compounds were structurally characterized by elemental analysis, IR spectroscopy, and single-crystal X-ray diffraction. Compounds 1–4 are mononuclear while 5–6 are binuclear. Each cobalt atom of 1–6 is hexacoordinate, with a distorted octahedral CoN₄O₂ coordination geometry incorporating two N,N′-bidentate dmpzm ligands and one O,O′-bidentate carboxylate ligand. There are rich intra- and intermolecular hydrogen bonds in the crystals of 1–6, thereby forming either 2D hydrogen-bonded networks (1 and 2) or 3D hydrogen-bonded networks (3–6). In addition, the thermal behaviors of 1–6 were also investigated.     

Strong antiferromagnetism in the dinuclear 2-pyridone complex with N–C–O bridges: A paddle-wheel analogue of the dinuclear tetracarboxylates

A novel dinuclear complex [Cu₂(μ-L)₄(HL)₂] (1) was isolated from starting 2-pyridone (HL) via a resonance and a tautomeric transformation. Each copper centre is in a square-pyramidal coordination sphere, defined by two oxygen atoms (Cu–O4 1.978(5), Cu–O11 1.964(4) Å) and two nitrogen atoms (Cu–N2 2.003(5), Cu–N3 2.007(5) Å) of four bridging deprotonated pyridin-2-olates and an oxygen atom on the top from a neutral 2-pyridone (Cu–O2 2.227(5) Å), analogous to tetracarboxylate paddle-wheel complexes. Compound 1 was compared with mixed pyridin-2-olato/methanoato analogues [Cu₂(μ-HCO₂)₂(μ-L)₂(HL)₂] · 2CH₃CN (2) and [Cu₂(μ-HCO₂)₂(μ-L)₂(HL)₂] (2a) (2a is an air stable form obtained from 2 outside mother-liquid). The EPR spectra of air stable 1 and 2a show three signals H_z1, H₂ and H_z2, typical for the binuclear systems with spin S = 1, both revealing strong antiferromagnetism 2J = −334 (1) and −324 cm⁻¹ (2a). Interestingly, only for 1 additional H₁ signal at 100 mT is noticed (D(1) = 0.293 cm⁻¹ < hν = 0.320 cm⁻¹ < D(2a) = 0.347 cm⁻¹). On the other hand, several broad signals in the 100–450 mT region, only in the high temperature spectrum for 2a are observed. These results are in agreement with the magnetic susceptibility analysis.     

Two-photon laser optogalvanic studies of the 6snf F4 Rydberg states of mercury by RF discharge

We present new experimental data on the energies and quantum defects of the highly excited states in mercury using the laser optogalvanic detection technique in conjunction with a RF discharge cell. The 6snp ³P₂ (12 ≤ n ≤ 25) and 6snf ³F₄ (9 ≤ n ≤ 52) Rydberg series have been observed via two photon excitation from the 6s6p ³P₂ intermediate state, which is collisionally populated in the RF discharge. Three lines corresponding to transitions from the 6s6p ³P₀ metastable state to 6s8p ³P_0,2 and 6s5f ³F₂ states are also located. The 6snf ³F₄ Rydberg series to such high n-values are reported for the first time.