Thermogravimetric analysis of organoclays intercalated with the surfactant octadecyltrimethylammonium bromide

Summary High resolution thermogravimetric analysis has been used to study the thermal decomposition of montmorillonite modified with octadecyltrimethylammonium bromide. Thermal decomposition occurs in 4 steps.The first step of mass loss is observed from ambient to 100°C temperature range and is attributed to dehydration of adsorbed water. The second step of mass loss occurs between 87.9 to 135.5°C temperature range and is also attributed to dehydration of water hydrating metal cations such as Na⁺. The third mass loss occurs between 179.0 and 384.5°C; it is assigned to the loss of surfactant. The fourth step is ascribed to the loss of OH units due to dehydroxylation of the montmorillonite and takes place between 556.0 and 636.3°C temperature range. These TG steps are related to the arrangement of the surfactant molecules intercalating the montmorillonite. Changes in the basal spacing of the clay with surfactant are followed by X-ray diffraction. Thermal analysis provides an indication of the stability of the organo-clay.     

Structure of organoclays--an X-ray diffraction and thermogravimetric analysis study

X-ray diffraction has been used to study the changes in the surface properties of a montmorillonitic clay through the changes in the basal spacings of montmorillonite (SWy-2) and surfactant-intercalated organoclays. Variation in the d-spacing was found to be a step function of the surfactant concentration. High-resolution thermogravimetric analysis (HRTG) shows that the thermal decomposition of SWy-2-MMTs modified with the surfactant octadecyltrimethylammonium bromide takes place in four steps. A mass-loss step is observed at room temperature and is attributed to dehydration of adsorption water. A second mass-loss step is observed over the temperature range 87.9 to 135.5 degrees C and is also attributed to dehydration of water hydrating metal cations such as Na+. The third mass loss occurs from 178.9 to 384.5 degrees C and is assigned to a loss of surfactant. The fourth mass-loss step is ascribed to the loss of OH units through dehydroxylation over the temperature range 556.0 to 636.4 degrees C. A model is proposed in which, up to 0.4 CEC, a surfactant monolayer is formed between the montmorillonitic clay layers; up to 0.8 CEC, a lateral-bilayer arrangement is formed; and above 1.5 CEC, a pseudotrimolecular layer is formed, with excess surfactant adsorbed on the clay surface.     

Thermal and colloidal behavior of amine-treated clays: the role of amphiphilic organic cation concentration

The modification of sodium montmorillonite (NaMMT) through the insertion of amphiphilic hexadecylammonium cations into the clay's interlayer spaces has been studied. Alkylammonium concentrations equivalent to 0.15-3.00 times the cation exchange capacity of the clay were used. The conformation of the surfactant cations in the confined space of the silicate galleries was investigated by X-ray diffraction analysis and scanning electron microscopy, while the organoclay's thermal stability was examined by thermogravimetric analysis. The clay's surface properties induced by the ion-exchange process were followed by measurements of the mineral's zeta potential as a function of pH and surfactant concentration, while the coagulation rates of organoclay suspensions in water and in chloroform were examined using dynamic light scattering. All the results are consistent with showing that the overall characteristics and thus the behavior of the modified MMT particles strongly depend on the alkylammonium surfactant concentration used in the modification process. This, however, has very important implications for any attempt to incorporate the organomodified MMT particles into different media for various applications such as polymer nanocomposite preparation.     

Thermal characterization of montmorillonite clays saturated with various cations

Emanation thermal analysis (ETA), thermogravimetry and high temperature XRD were used to characterize the thermal behavior during dehydration of natural Na montmorillonite (Upton Wyoming, USA) and homoionic montmorillonite (MMT) samples saturated with different cations, i.e. Li⁺, Cs⁺, NH₄⁺, Mg²⁺ and Al³⁺. ETA results characterized radon mobility and microstructure changes that accompanied the mass loss of the samples due to dehydration on heating in air. A collapse of interlayer space between the silicate sheets after water release from the MMT samples was characterized by a decrease of the radon release rate, ΔE. Decreases in c-axis basal spacing (d ₀₀₁) values determined from XRD patterns for the different montmorillonite samples follow the sequence:

Surface properties of chitosan composites with poly(<Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone) and montmorillonite

Surface properties of composites containing chitosan (Ch) with poly(N-vinylpyrrolidone) (PVP) and montmorillonite (MMT) additives were investigated by contact angle measurements, thermogravimetric analysis (TGA), atomic force microscopy (AFM) and tensile tests. Composites were obtained by drop casting suspensions of montmorillonite (1 wt % relative to chitosan) and polymer (1 wt %) in 0.1 mol/dm³ acetic acid. Contact angle measurements for diiodomethane (D) and glycerol (G) on the surfaces of the chitosan films, PVP and their composite films were made; surface free energies were also calculated. It was found that the PVP/MMT or Ch/PVP/MMT blend surface is enriched with a high surface energy component, i.e., polyvinylpyrrolidone. The roughness of chitosan composites increases after the addition of montmorillonite; this may indicate an increase in the heterogeneity of this composition in comparison to other compositions. The TGA thermograms and mass loss percentages at different decomposition temperatures showed that the thermal stability of the binary composite slightly increases upon the addition of polyvinylpyrrolidone. The mechanical properties such as tensile strength and Young modulus depend on the composition and varied non-uniformly.     

Thermal degradation of poly(lactic acid) measured by thermogravimetry coupled to Fourier transform infrared spectroscopy

Thermogravimetric (TG), differential thermal analysis (DTA) and thermal degradation kinetics, FTIR and X-ray diffraction (XRD) analysis of synthesized glycine–montmorillonite (Gly–MMT) and montmorillonite bound dipeptide (Gly–Gly–MMT) along with pure Na–MMT samples have been performed. TG analysis at the temperature range 25–250 °C showed a mass loss for pure Na–MMT, Gly–MMT and Gly–Gly–MMT of about 8.0%, 4.0% and 2.0%, respectively. DTA curves show the endothermic reaction at 136, 211 and 678 °C in pure Na–MMT whereas Gly–MMT shows the exothermic reaction at 322 and 404 °C and that of Gly–Gly–MMT at 371 °C. The activation energies of the first order thermal degradation reaction were found to be 1.64 and 9.78 kJ mol⁻¹ for Gly–MMT and Gly–Gly–MMT, respectively. FTIR analyses indicate that the intercalated compounds decomposed at the temperature more than 250 °C in Gly–MMT and at 250 °C in Gly–Gly–MMT.     

Investigation of structure and thermal stability of surfactant-modified Al-pillared montmorillonite

For combining the properties of organoclays and pillared clays, inorganic–organic clays have attracted much attention in recent years. In this study, Al Keggin cation pillared montmorillonites (Al-Mts) were first prepared and parts of Al-Mts were calcined at different temperatures (C-Al-Mts). The inorganic–organic montmorillonites were synthesized by intercalating Al-Mts and C-Al-Mts with the cationic surfactant, hexadecyltrimethyl ammonium bromide (HDTMAB). The products were characterized by X-ray diffraction, X-ray fluorescence, and simultaneous thermogravimetric analysis. For HDTMAB-modified uncalcined Al Keggin cation pillared montmorillonites (H-Al-Mts), the basal spacing increased with the increment of surfactant loading level, but the Al content of H-Al-Mts decreased simultaneously, indicating that the intercalated surfactant replaced some Al Keggin cations in the interlayer space. However, in the case of C-Al-Mts, the interlayer spaces could not be further expanded after surfactant modification, implying that the neighboring montmorillonite layers were “locked” by the aluminum pillars which were formed by dehydroxylation of Al Keggin cation pillars during thermal treatment. The thermal stability of HDTMAB-modified C-Al-Mts (H-C-Al-Mts) was much better than that of H-Al-Mts. The major mass loss of H-C-Al-Mts occurred at ca. 410 °C, corresponding to decomposition of intercalated surfactant cations. In contrast, H-Al-Mts displayed two mass loss temperatures at ca. 270 and 410 °C, corresponding to the evaporation of surfactant molecules and the decomposition of surfactant cations in the interlayer space, respectively.     

Structure and properties of polymer modified TiO2 pillared montmorillonite

With the aim of improving the microstructures and properties of TiO₂ pillared montmorillonite (MMT), a long-chain polymer (polyoxypropylenediamine, PPO-D 2000) was used as a template to synthesize composite pillared MMT. The materials were characterized by X-ray powder diffraction (XRD), Fourier transform infrared (FT-IR) spectrophotometer, Fourier Raman (FT-Raman) spectrophotometer, thermo-gravimeter/differential thermogravimeter (TG/DSC), transmission electron microscopy (TEM), and Brunauer-Emmett-Teller (BET) methods. The results show that as compared to low-molecular weight surfactant, this polymer significantly expanded the interlayer spacing and thus more TiO₂ could be intercalated into MMT. The specific surface area of polymer/TiO₂ pillared MMT was increased by 13% with comparison to TiO₂ pillared MMT and rose to 241.52 m²/g. Both the pore diameter and volume are doubled, and thus the pore structure is optimized markedly. The investigation on the photo-catalytic degradation of methyl orange in aqueous solution show that the modulation of polymer molecules raise the adsorption content of montmorillonite and improve the photo-catalytic activity. Therefore, this process provides a novel alternative to design and prepare the advanced eco-catalytic materials with high adsorption capacity and photo-catalytic activity. __________ Translated from Huaxue Tongbao, 2007, 12: 936–941 [译自: 化学通报]     

Study of cetyltrimethylammonium and cetylpyridinium adsorption on montmorillonite

Adsorption of cetyltrimethylammonium (CTA) and cetylpyridinium (CP) onto Na-rich montmorillonite (MMT) was studied. For this purpose, the adsorption isotherms of CTA and CP, along with desorption curves of metal cations (Na+, K+, Ca2+, Mg2+), were obtained by means of capillary isotachophoresis and atomic absorption spectrometry. Infrared, X-ray diffraction pattern, specific surface area, porosity, and moisture adsorption measurements of montmorillonite revealed that CTA and CP were adsorbed in monolayer arrangements. CTA is assumed to be attached to the negatively charged MMT surface mainly by electrostatic forces. On the other hand, CP, adsorbed in higher amounts, can be additionally bound via other interactions of pyridinium rings, such as induced and pi-pi interactions. By the surfactant adsorption, the montmorillonite surface became hydrophobic and its micro- and mesopores were significantly diminished. Using scanning electron microscopy, aggregation of such organically modified MMT particles was observed.     

A thermoanalytical assessment of an organoclay

High resolution thermogravimetric analysis (TG) has attracted much attention in the synthesis of organoclays and its applications. In this study, organoclays were synthesised through ion exchange of a single cationic surfactant for sodium ions, and characterised by methods including X-ray diffraction (XRD) and TG. The changes of surface properties in montmorillonite (MMT) and organoclays intercalated with surfactant were determined using XRD through the changes in the basal spacing. The TG was applied in this study to investigate more information of the configuration and structural changes in the organoclays with thermal decomposition. There are four different decompositions steps in differential thermogravimetric curves. The obtained TG steps are relevant to the arrangement of the surfactant molecules intercalated in MMT and the thermal analysis indicates the thermal stability of surfactant modified clays. This investigation provides new insights into the properties of organoclays and is important in the synthesis and processing of organoclays for environmental applications.     

Thermal properties of different transition metal forms of montmorillonite intercalated with mono-, di-, and triethanolammonium compounds

In the present study, different transition metal forms of montmorillonite have been intercalated with mono-, di-, and triethanolammonium cations via d coordination mechanism to investigate their thermal behavior, structural characteristics, surface properties, and elemental composition using TG, XRD, BET, and CHNS techniques. Thermogravimetric analysis showed two thermal transition steps for transition metal-exchanged montmorillonites, which attributed to desorption of the physically adsorbed water and hydrated water, and dehydroxylation of the structural water; whereas for ammonium-montmorillonite complexes, the TG curves showed three thermal transition steps which attributed to desorption of the adsorbed water and dehydration, decomposition of the ammonium cations in the interlayer space of montmorillonite, and the dehydroxylation of the structural water. The thermal analysis of ammonium-montmorillonites affirmed that the molar mass of amine compounds used affects both desorption temperature (position) and the amount of the adsorbed water (intensity). XRD results revealed that the molar mass of amine used has linear relation with the basal spacings of the corresponding ammonium-montmorillonites, indicating structural changes. BET results showed that the molar mass of amines has an inverse effect on the surface area of the studied samples. CHNS analysis for the studied samples quantitatively confirmed the intercalation of ammonium cations into the interlayer space of montmorillonite.     

Thermogravimetric analysis of different molar mass ammonium cations intercalated different cationic forms of montmorillonite

Different cationic forms of montmorillonite, mainly K-, Na-, Ca- and Mg-montmorillonites were intercalated in this study via ion exchange process with mono-, di-, and triethanolammonium cations. The developed samples were characterized by TG, XRD, and CHNS techniques. Thermogravimetric study of ammonium-montmorillonites shows three thermal transition steps, which are attributable to the volatilization of the physically adsorbed water and dehydration, followed by the decomposition of the intercalated ammonium cations and dehydroxylation of the structural water of the modified clay, respectively, while untreated and cationic forms of montmorillonite showed only two decomposition steps. The type of ammonium cation has affected both desorption temperature (Position) and the amount of the adsorbed water (intensity). XRD results show a stepwise change in the crystallographic spacings of montmorillonite with the molar mass of ammonium cation, reflecting a change in the structure of the clay. CHNS data confirm the intercalation of ammonium cations into the interlayer space of montmorillonite and corroborate the effect of the molar mass of ammonium cation on the amount adsorbed by the clay.     

Study of elastomeric polyurethane nanocomposites prepared from grafted organic–montmorillonite

4,4′-Diphenylmethane diisocyanate (MDI) was grafted on to organic–montmorillonite (OMMT) by reaction between hydroxyl groups (−OH) on surface of the montmorillonite and the isocyanate groups (−NCO) of MDI, thus forming grafted organic–montmorillonite (MOMMT). Intercalated nanocomposites based on polyurethane (PU) and MOMMT were prepared by solution intercalation technology. The interface interaction of PU/MOMMT nanocomposites was better than that of PU/MMT composites. The tensile strength, elongation at break, and tear strength of the PU/MOMMT nanocomposites increased for MOMMT content up to 5% w/w, and then decreased with further increase in MOMMT content. At the same filler content, the tensile strength and tear strength of PU/MOMMT nanocomposites were higher than those of PU/OMMT nanocomposites, whereas the elongations at break of PU/MOMMT nanocomposites were smaller than those of PU/OMMT nanocomposites. The initial temperatures of weight loss of PU/MOMMT nanocomposites were lower than for PU/MMT composites in the first step of thermal degradation, whereas in the second step initial temperatures of weight loss were higher for PU/MOMMT nanocomposites.     

Dispersion and distribution of organically modified montmorillonite in nylon‐66 matrix

Nylon‐66 nanocomposites were prepared by melt‐compounding nylon‐66 with an alkyl ammonium surfactant pretreated montmorillonite (MMT). The thermal stability of the organic MMT powders was measured by thermogravimetric analysis. The decomposition of the surfactant on the MMT occurred from 200 to 500 °C. The low onset decomposition temperature of the organic MMT is one shortcoming when it is used to prepare polymer nanocomposites at high melt‐compounding temperatures. To provide greater property enhancement and better thermal stability of the polymer/MMT nanocomposites, it is necessary to develop MMT modified with more thermally stable surfactants. The dispersion and spatial distribution of the organic MMT layers in the nylon‐66 matrix were characterized by X‐ray diffraction. The organic MMT layers were exfoliated but not randomly dispersed in the nylon‐66 matrix. A model was proposed to describe the spatial distribution of the organic MMT layers in an injection‐molded rectangular bar of nylon‐66/organic MMT nanocomposites. Most organic MMT layers were oriented in the injection‐molding direction. Layers near the four surfaces of the bar were parallel to their corresponding surfaces; whereas those in the bulk differed from the near‐surface layers and rotated themselves about the injection‐molding direction. The influence of the spatial distribution of the organic MMT on crystallization of nylon‐66 was also investigated. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1234–1243, 2003     

Effect of intercalating agents on structure and properties of dimer acid‐based polyamide modified by in situ doping of Na‐montmorillonite

Under the condition of 0.4% (mass), the effects of intercalating agents on conglomeration structure and thermal and mechanical properties of dimer acid‐based polyamide (DAPA) were investigated. The results show that layer‐stripped Na‐montmorillonite (MMT) with octadecyl trimethyl ammonium chloride caused a sharp decrease of content of the γ crystal phase in DAPA, thus bringing out decrease in mechanical properties and increase in IZOD notched impact strength while a sharp increase of content with the γ crystal phase in DAPA modified by Na‐MMT with dioctadecyl dimethyl ammonium chloride. Thus, it brought out a large increase in mechanical properties and a limited increase in IZOD notched impact strength. The decomposition reaction processes of DAPA modified by Na‐MMT and Na‐MMT with octadecyl trimethyl ammonium chloride were one step ranging from 410 to 500°C, respectively. The thermal decomposition reaction processes of DAPA modified by Na‐MMT with dioctadecyl dimethyl ammonium chloride were two steps. Copyright © 2016 John Wiley & Sons, Ltd.     

Desorption of stearic acid upon surfactant adsorbed montmorillonite

Thermal analysis and differential thermal analysis offers a novel means of studying the desorption of acids such as stearic acid from clay surfaces. Both adsorption and chemisorption can be distinguished through the differences in the temperature of mass losses. Increased adsorption is achievable by adsorbing onto a surfactant adsorbed montmorillonite. Stearic acid sublimes at 179 °C but when adsorbed upon montmorillonite sublimes at 207 and 248 °C. These mass loss steps are ascribed to the desorption of the stearic acid on the external surfaces of the organoclays and from the de-chemisorption from the surfactant held in the interlayer of the montmorillonite.     

The influence of interlayer cations on the photo‐oxidative degradation of polyethylene/montmorillonite composites

The photo‐oxidative degradation of polyethylene/montmorillonite (PE/MMT) nanocomposite and microcomposite has been investigated. It has been found that the rate of photo‐oxidative degradation of PE/MMT nanocomposite and PE/Mⁿ⁺MMT (where Mⁿ⁺ stands for multivalent transition metal cation) microcomposites is much faster than that of pure PE. For the PE/MMT nanocomposite, the acceleration of photo‐oxidative degradation is due to the influence of MMT and ammonium ion, in which the influence of ammonium is primary. The decomposition of ammonium ion may create acidic sites on layered silicates; meanwhile, the complex crystallographic structure and habit of clay minerals could also result in some active sites. The reversible photo‐redox reaction of transition metal cations has a catalytic effect in the degradation of the polymer matrix. All these catalytic active sites can accept single electrons from donor molecules of polymer matrix and induce the formation of free radical upon UV irradiation. The generation of free radical leads to the oxidization and break of molecular chain. Thus, the materials suffer degradation and their mechanical strength decreases. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3006–3012, 2004     

A new nanocomposite catalyst based on clay-supported heteropolyacid for the green synthesis of 2,4,5-trisubstituted imidazoles

Intercalation of cetyltrimethylammonium (CTA⁺) cations within the nanolayers of montmorillonite (MMT) clay followed by reaction with Keggin-type phosphomolybdic acid (PMo) resulted in the synthesis of (CTA)₃PMo-MMT nanocomposite catalyst. The prepared nanocomposite catalyst was characterized using different physicochemical methods such as Fourier-transform infrared and inductively coupled plasma–optical emission spectroscopies, X-ray diffraction, and nitrogen adsorption–desorption (Brunauer–Emmett–Teller method) analyses. Characterization techniques demonstrated the intercalation of (CTA)₃PMo species into the nanolayers of MMT. The resulting (CTA)₃PMo-MMT nanocomposite catalyst efficiently catalyzed the synthesis of 2,4,5-trisubstituted imidazoles under solvent-free conditions. The efficiency is due to the fact that the presence of CTA⁺ species makes the nanocomposite catalyst hydrophobic and facilitates the accessibility of hydrophobic reactants to active sites in the course of the reaction. High activity and selectivity were achieved in the presence of the prepared nanocomposite catalyst. The nanocomposite catalyst was readily isolated from the reaction mixture using simple filtration, washed with ethanol, and recycled five times without a major loss of activity.     

Thermal Degradation Kinetics of Polyurethane/Organically Modified Montmorillonite Clay Nanocomposites by TGA

Polyurethane (PU) has been prepared by using polyether polyol (jagropol oil) and 1,6- hexamethylene diisocyanate (HMDI) as a cross-linker. The organically modified montmorillonite clay (MMT) is well-dispersed into urethane matrix by an in situ polymerization method. A series of PU/MMT nanocomposites have been prepared by incorporating varying amounts of nanoclay viz., 1, 3, 5 and 6 wt %. Thermogravimetric analysis (TGA) of the PU/MMT nanocomposites has been performed in order to establish the thermal stability and their mode of thermal degradation. The TGA thermograms exhibited the fact that nanocomposites have a higher decomposition temperature in comparison with the pristine PU. It was found that the thermal degradation of all PU nanocomposites takes place in three steps. All the nanocomposites were stable up to 205°C. Degradation kinetic parameters of the composites have been calculated for each step of the thermal degradation processes using three mathematical models namely, Horowitz–Metzger, Coats–Redfern and Broido's methods.