Preparation of 1-butyl-3-methylimidazolium salts and study of their phase behavior and intramolecular intractions

Seven organic salts of 1-butyl-3-methylimidazolium with anions Br⁻, BF₄ ⁻, NO₃ ⁻, SO₄ ²⁻, HSO₄ ⁻, SCN⁻, PO₄³⁻ were prepared. Structure of these compounds is elucidated and purity is confirmed. The products are characterized by melting point, thin layer chromatography, data of elemental analysis, cromatomass-, NMR and IR spectroscopy. All these compounds are ionic liquids, five are low temperature ones. Principal thermal characteristics are found that allow accounting for the phase behavior of the prepared compounds at their application. Existence of intramolecular and intermolecular interactions between the heterocyclic anion and inorganic cation in by means of the formation of hydrogen bond is established.     

Anion Binding‐Induced White Light Emission using a Water‐Tolerant Fluorescent Molecular Tweezer

A novel fluorescent molecular tweezer (FMT), built on the pyridine‐2,6‐bis‐carboxamide framework, has been developed that, in presence of a red emitter, gives rise to white light emission in response to the addition of H₂PO₄^? anions. The FMT incorporates two pyrene moieties as fluorescent reporter units and a strategically placed amine residue that imparts pH sensitivity to the fluorescence and offers additional electrostatic/hydrogen‐bonding interactions to the anions. As a result, this FMT selectively binds monoanionic tetrahedral oxyanions such as H₂PO₄^? and HSO₄^? that contain hydrogen bond donors and acceptors, and can sense their presence in aqueous acetonitrile through changes in fluorescence. Anion binding results in excimer formation by the pyrenes and a bluish‐green emission from the FMT. Both amide and amine residues of the FMT interact with these anions. The binding stoichiometry with H₂PO₄^? and HSO₄^? was found to be 1:1 and affinity of the FMT for these anions is of the order of 10⁴ m ^?1. The limit of detection for H₂PO₄^? was found to be 13 nm . Addition of a perylene monoimide‐based red emitter gives rise to panchromatic emission perceived as white light.     

A sandwich anion receptor by a BODIPY dye bearing two calix[4]pyrrole units

A novel dicalix[4]pyrrolyl-substituted 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) dye I with an absorption peak at approximately 670 nm and an emission peak at about 690 nm was prepared. As an anion receptor, I displayed a red shift in absorption spectra and fluorescence quenching in varying degrees in the presence of F⁻, AcO⁻, H₂PO₄⁻, or Cl⁻. Compared with the parent calix[4]pyrrole, a representative anion receptor, I exhibited a stronger affinity to these anions due to the formation of a sandwich complex through multiple hydrogen-bonding interactions.     

Synthesis and anion recognition of neutral receptors based on multiamide calix[4]arene

Two multiamide calix[4]arenes (5, 6) were synthesized and characterized by NMR, MS and elemental analysis. The binding properties of receptors with some anions (π-O₂NPhOPO₃²⁻, π-O₂NPhO⁻, H₂PO₄⁻, Ac⁻, Cl⁻, Br⁻ and I⁻) were studied by UV-Vis spectra. The results indicate that the tetraamide calix[4]arenes (5, 6) have a good selectivity to the anions containing aromatic ring (π-O₂NPhOPO₃ ²⁻, π-O₂NPhO⁻). The 1 : 1 complexes between host and guest were formed through multiple hydrogen bonding and π-π interactions. The hosts 5 and 6 also show a definite binding ability for the anions (H₂PO₄⁻, Ac⁻, Cl⁻) that have no ultraviolet absorption, which provides a simple method of spectrum detection for these anions.     

A novel neutral receptor for selective recognition of H2PO 4 −

A new urea-based receptor was designed to selectively recognize H₂PO₄⁻ among other anions (such as F^-, Cl^-, Br^-, I^-, OH^-, AcO^-) in organic solvent (DMSO) through intermolecular hydrogen bonding. Addition of anions to the receptor caused changes in UV–vis spectrum which provided the first indication of its anion binding ability. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Structure of the C17H20FN3O 32+ ·2HSO 4? · H2O compound

A new compound of C₁₇H₂₀FN₃O₃²⁺ · 2HSO₄⁻·H₂O [ciprofloxacindi-um bis(hydrosulfate) monohydrate], C₁₇H₁₈FN₃O₃ 1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid (CfH, ciprofloxacin) is obtained and its crystal structure is determined. The crystal contains CfH₃²⁺ and HSO₄⁻ ions and crystallization water molecules. Hydrogen (H3), which forms an intramolecular hydrogen bond with oxygen O2 of the carboxyl group, is attached to the carbonyl O1 atom. Hydrogen H4 of the carboxyl group is hydrogen bonded to the crystallization water molecule which links CfH₃²⁺ with two HSO₄⁻ groups by hydrogen bonds. Both H atoms at N3 of the piperazine ring form hydrogen bonds with two oxygen atoms of other HSO₄⁻ anions. Intramolecular hydrogen bonds of two types are present in the CfH₃²⁺ cation. One of them forms a six-membered ring, bonding O1 and O2 atoms, while the other, also enclosing a six-membered ring, links fluorine and carbon C14 atoms. Original Russian Text Copyright ? 2009 by A. D. Vasiliev, N. N. Golovnev, and I. A. Baidina __________ Translated from Zhurnal Strukturnoi Khimii, Vol. 50, No. 1, pp. 165–168, January–February, 2009.     

Synthesis,Crystal Structure and Raman Spectrum of Hydrazinium(+2) Fluoroarsenate(III) Fluoride,N<Subscript>2</Subscript>H<Subscript>6</Subscript>AsF<Subscript>4</Subscript>F

Summary.  Hydrazinium(+2) fluoroarsenate(III) fluoride was prepared by the reaction of hydrazinium(+2) fluoride and liquid arsenic trifluoride. N₂H₆AsF₄F is stable at 273 K, but decomposes slowly at room temperature. N₂H₆AsF₄F crystallizes in the orthorhombic space group Pnn2 with a = 774.0(2) pm, b = 1629.2(4) pm and c = 436.6(1) pm; V = 0.5506(3) nm³, Z = 4 and d _c  = 2.461 g cm⁻³. The structure consists of N₂H₆ ²⁺ cations, AsF₄ ⁻ anions, and F⁻ anions and is interconnected by a hydrogen bonding network. Distorted trigonal-bipyramidal AsF₄ ⁻ units are very weakly interconnected and form chains along the b axis. Bands in the Raman spectrum are assigned to the vibrations of N₂H₆ ⁺² cations and AsF₄ ⁻ anions. Corresponding author. E-mail: adolf.jesih@ijs.si Received April 18, 2002; accepted July 15, 2002     

Second Dissociation Constant of H<Subscript>2</Subscript>Te and the Absorption Spectra of HTe<Superscript>–</Superscript>, Te<Superscript>2–</Superscript> and Te<Subscript>2</Subscript><Superscript>2–</Superscript> in Aqueous Solution

We have measured the second acid dissociation constant, K _2a , at several ionic strengths for hydrogen telluride (H₂Te) using the Charge Transfer to Solvent (CTTS) uv spectra of its anions HTe⁻ and Te²⁻. Since it is produced in our solutions, we have also determined the spectra of Te₂ ²⁻ both in the uv and in the visible regions. At 25 ^∘C, K _2a = (1.28 ± 0.02) × 10⁻¹² by extrapolation to zero ionic strength. Its value at an ionic strength equal to 0.5 mol.dm^-3 was estimated to be (8.7 ± 0.2) × 10⁻¹². The solution thermodynamics of these species are also discussed and comparisons are made to related acids.     

Colorimetric and ratiometric sensors derivated from natural building blocks for fluoride ion detection

Three novel colorimetric and ratiometric probes (SH-1~3) for fluoride ion detection were designed and synthesized from nature small molecules. Obvious yellow-to-orange color change of these probes in the THF was achieved only in presence of F^? among the eight anions (F^?, Cl^?, Br^?, I^?, H₂PO₄^?, HSO₄^?, CH₃COO^–, ClO₄^?), along with the emission shifting from green to orange red. These three probes are 1:1 complexed with fluoride ions, with complexation constant of around 0.1 × 10⁴ M^?1. The detection limit of probes SH-1~3 reached as low as around 1 μM. ¹H NMR titration study suggested that the fluoride ion induced deprotonation of the probe through hydrogen bonding interaction between amino group of probe and fluoride ion.     

Efficient fluoride-selective receptor: experiment and theory

A novel artificial receptor, (3′-nitrobenzo)[2,3-d]-(3′′-nitrobenzo)[9,10-d]-1,4,8,11-tetraazacyclotetradecane-5,7,12,14-tetraone, has been synthesized and shows high selective and recognitive ability for F^- among F⁻, Cl⁻, Br⁻, AcO⁻, H₂PO₄⁻ by UV-vis and ¹H NMR titration experiments. Theoretical investigations suggest that the fluoride selectivity among various anions comes from the fact that the fluoride approaches much closer to the amide protons than other anions located above the cavity. The interaction energies support the large binding ability difference between F⁻ and Cl⁻/Br⁻/AcO⁻/H₂PO₄⁻.     

Cleavage of a PN Bond in a Urea‐Containing (Ph2P(R)PPh2)‐Bridged Dinuclear Gold(I) Thiolate Complex by Fluoride and a Mechanistic Insight

A urea‐containing, (Ph₂P(R)PPh₂)‐bridged, dinuclear, gold(I) thiolate complex, [Au₂{Ph₂PN(C₆H₄OMe‐4)PPh₂}(SC₆H₄NHCONHC₆H₅)₂] ( 1 ) was designed and synthesized and its photophysical and anion recognition properties studied. The results show that 1 has a high selectivity toward F^?. Upon addition of F^?, the yellow solution was decolorized, and drastic changes of emission and ¹H and ³¹P{¹H} NMR signals were observed. Interestingly, these changes are attributed to fluoride‐assisted P?N bond hydrolysis, instead of the expected hydrogen‐bonding interactions with the urea receptor. Similar changes were observed for two other basic anions, AcO^? and H₂PO₄^?, but to a much lesser extent; and these anions were found to bind to the urea receptor at the same time. On the other hand, Cl^? was found to only bind to the urea moiety through hydrogen‐bonding interactions. Further studies with the control complex [Au₂{Ph₂PN(C₆H₄OMe‐4)PPh₂}Cl₂] ( 2 ) indicate that F^? assists the hydrolysis process via cleavage of the P?N bond. DFT calculations were performed to study the reaction mechanism for the fluoride‐assisted P?N bond hydrolysis of 2 ; these provide a better insight into the role of fluoride in the hydrolysis.     

Theoretical investigation on the structural and electronic properties of complexes formed by thymine and 2′-deoxythymidine with different anions

Hydrogen bonding interactions between thymine nucleobase and 2′-deoxythymidine nucleoside (dT) with some biological anions such as F⁻ (fluoride), Cl⁻ (chloride), OH⁻ (hydroxide), and NO₃ ⁻ (nitrate) have been explored theoretically. In this study, complexes have been studied by density functional theory (B3LYP method and 6-311++G (d,p) basis set). The relevant geometries, energies, and characteristics of hydrogen bonds (H-bonds) have been systematically investigated. There is a correlation between interaction energy and proton affinity for complexes of thymine nucleobase. The nature of all the interactions has been analyzed by means of the natural bonding orbital (NBO) and quantum theory atoms in molecules (QTAIM) approaches. Donors, acceptors, and orbital interaction energies were also calculated for the hydrogen bonds. Excellent correlations between structural parameter (δR) and electron density topological parameter (ρ _b) as well as between E(2) and ρ _b have been found. It is interesting that hydrogen bonds with anions can affect the geometry of thymine and 2′-deoxythymidine molecules. For example, these interactions can change the bond lengths in thymine nucleobase, the orientation of base unit with respect to sugar ring, the furanose ring puckering, and the C1′–N1 glycosidic linkage in dT nucleoside. Thus, it is necessary to obtain a fundamental understanding of chemical behavior of nucleobases and nucleosides in presence of anions.     

DDTC-Na-based colorimetric chemosensor for the sensing of cyanide in water

Sodium diethyldithiocarbamate (DDTC-Na) was demonstrated to be a new colorimetric cyanide chemosensor by utilizing an indirect trick. First, some copper ions were added to the colorless aqueous solution of DDTC-Na. Then, the resultant brown solution was studied upon the addition of different anions, including Cl⁻, I⁻, IO₃⁻, SO₄²⁻, NO₂⁻, Br⁻, H₂PO₄⁻, F⁻, SCN⁻, HSO₄⁻, ClO₄⁻ and CN⁻. It was observed by naked eyes that the brown solution changed to colorless immediately after the addition of the trace cyanide, but there were no changes towards other anions, making DDTC-Na a good selective cyanide chemosensor in pure water. Supported by the National Natural Science Foundation of China (Grant Nos. 20674059 & 20402011)     

Influence of the specific adsorption of anions on the “double layer region” of the cyclic voltammetric curves obtained with platinized platinum electrodes

Cyclic voltammetric study of platinized electrodes restricted to the potential range corresponding to the “double-layer region” (350–700 mV on RHE scale) was carried out in acid medium in the presence of, HSO⁻ ₄, H₂PO⁻ ₄, Cl⁻ and ClO⁻ ₄ anions. It is shown that the shape of the voltammetric curves strongly depends on the nature of the anions present in the system. The phenomena observed are ascribed to the specific adsorption of anions. A correlation is found between the results of radiotracer adsorption studies (differential voltradiometric curves) and the voltammetric measurements. Received: 24 September 1997 / Accepted: 25 November 1997     

Sorption behavior of Am<Superscript>3+</Superscript> on suspended pyrite

Sorption behavior of ²⁴¹Am (~10⁻⁹ M) on naturally occurring mineral pyrite (particle size: ≤70 μm) has been studied under varying conditions of pH (2–11), and ionic strength (0.01–1.0 M (NaClO₄)). The effects of humic acid (2 mg/L), other complexing anions (1 × 10⁻⁴ M CO₃ ²⁻, SO₄ ²⁻, C₂O₄ ²⁻ and PO₄ ³⁻), di- and trivalent metal ions (1 × 10⁻³ M Mg²⁺, Ca²⁺ and Nd³⁺) on sorption behavior of Am³⁺ at a fixed ionic strength (I = 0.10 M (NaClO₄)) have been studied. The sorption of ²⁴¹Am on pyrite increased with pH from 2.8 (84%) to 8.1 (97%). The sorption of ²⁴¹Am decreased with ionic strength at low pH values (2 ≤ pH ≤ 4), but was insensitive in the pH range of 4–10, suggesting the formation of outer-sphere complexes on pyrite surface at lower pH, and inner-sphere complexes at higher pH values. The sorption of ²⁴¹Am increased in the presence of (i) humic acid (5 < pH < 7.5), and (ii) C₂O₄ ²⁻ (2 < pH < 3). By contrast, other complexing anions such as (carbonate, phosphate, and sulphate) showed negligible influence on ²⁴¹Am sorption. The presence of Mg²⁺, Ca²⁺ ions showed marginal effect on the sorption profile of ²⁴¹Am; while the presence of Nd³⁺ ion suppressed its sorption significantly under the conditions of present study. The sorption of ²⁴¹Am on pyrite decreased with increased temperature indicating an exothermic process.     

Fluorescent-based Solid Sensor for HSO4− in Water

In this report, we have shown that the encapsulation of the terbium 2-methylimidazole-4,5-dicarboxylic acid complex into inorganic host tetraethoxysilance is considered to be an efficient way for the design of anion sensors. Strong green emission still can be observed when it disperses in pure water. It was found that the luminescence of hybrid material was selectively turned off rapidly (1 s) by hydrogen sulfate compared with the addition of different anions such as F⁻, Cl⁻, Br⁻ and I⁻. Thin film was successfully prepared and also could be a promising tool for recognizing HSO₄⁻.     

A colorimetric anion receptor containing the <Emphasis Type="Italic">cis</Emphasis>-Ru(bipy)<Subscript>2</Subscript><Superscript>2+</Superscript> group

When one or more nitro groups are incorporated into an anion receptor, intramolecular proton transfer from nearby –NH groups often takes place and is a significant obstacle for the construction of supramolecular systems. In this paper, by employing an intramolecular hydrogen bond between –NH and nitro groups in order to reduce the acidity of the amide group, we were able to construct a receptor that formed stable supramolecular systems. The receptor forms a 1:2 supramolecular compound with fluoride, whereas 1:1 complexes were formed with AcO⁻ and H₂PO₄ ⁻ in DMSO solution. Using this system, an easy-to-prepare test paper for the detection of F⁻ in low concentration at (10⁻⁴ M) in water was developed. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Anion adsorption in the course of dichromate reduction on a smooth gold electrode in aqueous acid solutions

The specific adsorption of anions (HSO₄ ⁻, Cl⁻) present in low concentration (c < 10⁻³ mol dm⁻³) was studied by radiotracer techniques in the course of the reduction of dichromate (chromate) species in 1 mol dm⁻³ HClO₄ supporting electrolyte. In accordance with the results of preliminary studies reported earlier, enhancement of the anion adsorption was found, induced by some adsorbed intermediates of the reduction process. Potential dependence of the induced adsorption and its correlation with the reduction rate was investigated. The role of adsorption competition between various anions is discussed. It is concluded that study of the induced anion adsorption could be a tool for the investigation of the sorption of intermediates formed in the course of the reduction. Received: 3 May 1999 / Accepted: 10 June 1999     

A theoretical investigation on structures of tripodal thiourea derivatives and their anion recognition

The structural geometries of three tripodal thiourea receptors, i.e. 1,3,5-triethyl-2,4,6-tris[(N′-methylthioureido)methyl]benzene (1), tris[N′-methyl-N-(2-aminoethyl)thiourea]methane (2), tris[N′-methyl-N-(2-aminoethyl)thiourea]amine (3), and their complexes with F⁻, Cl⁻, Br⁻, I⁻, NO₃ ⁻, CO₃ ²⁻, SO₄ ²⁻, HSO₄ ⁻, PO₄ ³⁻, HPO₄ ²⁻ and H₂PO₄ ⁻ were obtained using the density functional theory calculations. Electronic and thermodynamic properties of anion binding complexes of the receptors 1, 2 and 3 were investigated. Recognition abilities of all the receptors in terms of selectivity coefficients are reported. Intermolecular interactions in all the studied complexes occurring via multi-point hydrogen bonding were found. The receptors 1, 2 and 3 were found to be excellent selectivity for phosphate ion and their binding free energy for the phosphate ion are −292.57, −291.77 and −295.01 kcal/mol, respectively.     

One Novel Cu(II)–Amino Acid Schiff Base Complex Derived from Salicylaldehyde and L-Serine: Identification of Unusual Monodentate 4,4′-Bipyridine

One novel copper(II) complex [Cu(L)(4,4′-bipy)](ClO₄) (1), (where L: tridentate Schiff base derived from salicylaldehyde and L-serine) has been synthesised and characterised by spectroscopic and electrochemical studies. The single-crystal structure of the complex was determined. The crystal structure features the presence of [Cu(L)(4,4′-bipy)]⁺ cations and ClO₄⁻ anions aggregated by hydrogen bonding. Here, 4,4′-bipyridine functions as a monodentate ligand, which appears to be an unusual phenomenon.