A synthesis of 2-endo-amino-2-exo-hydroxymethylnorbornenes having inhibitory activity against protein kinase C

2-endo-Hexadecylamino-2-exo-hydroxymethylnorbornene (1a) was synthesized from 2-acetamidonorbornene-2-carboxylic acid methyl ester (2) in a good overall yield. 2-endo-Hexadecylamino-2,3-exo-bis(hydroxymethyl)norbornene (1b) was synthesized starting from dimethyl acetamidofumarate based on Diels-Alder strategy. 1a and 1b inhibited protein kinase C at the IC51 values of 2 x 10(-5) and 1 x 10(-5) M, respectively, but not protein kinase A at a concentration of 1 x 10(-3) M. The structure-activity relationships are discussed.     

Host-[2]rotaxanes as cellular transport agents

Host-[2]rotaxanes, containing a diarginine-derivatized dibenzo-24-crown-8 (DB24C8) ether as the ring and a cyclophane pocket or an aromatic cleft as one blocking group, are cell transport agents. These hosts strongly associate with a variety of amino acids, dipeptides, and fluorophores in water (1 mM phosphate buffer, pH 7.0), DMSO, and a 75/25 (v/v) buffer to DMSO solution. All peptidic guests in all solvent systems have association constants (K(A)'s) in the range of 1 x 10(4) to 5 x 10(4) M(-)(1), whereas the K(A) range for the fluorophores is 1 x 10(4) to 9 x 10(5) M(-)(1). Association constants for the cyclophane itself, cyclophane 3, are smaller. These values are in the 1 x 10(3) to 5 x 10(3) M(-)(1) range, which shows that the rotaxane architecture is advantageous for guest binding. Cyclophane-[2]rotaxane 1 efficiently transports fluorescein and a fluorescein-protein kinase C (PKC) inhibitor into eukaryotic COS-7 cells, including the nucleus. Interestingly, cleft-[2]rotaxane 2 does not transport fluorescein as efficiently, even though the results from the fluorescence assays show that both [2]rotaxanes bind fluorescein with the same ability.     

Kinetics and mechanism of large rate enhancement in the alkaline hydrolysis of N'-morpholino-N-(2'-methoxyphenyl)phthalamide

The apparent second-order rate constant (k OH) for hydroxide-ion-catalyzed conversion of 1 to N-(2'-methoxyphenyl)phthalamate (4) is approximately 10(3)-fold larger than k OH for alkaline hydrolysis of N-morpholinobenzamide (2). These results are explained in terms of the reaction scheme 1 --> k(1obs) 3 --> k(2obs) 4 where 3 represents N-(2'-methoxyphenyl)phthalimide and the values of k(2obs)/k(1obs) vary from 6.0 x 10(2) to 17 x 10(2) within [NaOH] range of 5.0 x 10(-3) to 2.0 M. Pseudo-first-order rate constants (k(obs)) for alkaline hydrolysis of 1 decrease from 21.7 x 10(-3) to 15.6 x 10(-3) s(-1) with an increase in ionic strength (by NaCl) from 0.5 to 2.5 M at 0.5 M NaOH and 35 degrees C. The values of k obs, obtained for alkaline hydrolysis of 2 within [NaOH] range 1.0 x 10(-2) to 2.0 M at 35 degrees C, follow the relationship k(obs) = kOH[HO(-)] + kOH'[HO (-)] (2) with least-squares calculated values of kOH and kOH' as (6.38 +/- 0.15) x 10(-5) and (4.59 +/- 0.09) x 10(-5) M (-2) s(-1), respectively. A few kinetic runs for aqueous cleavage of 1, N'-morpholino-N-(2'-methoxyphenyl)-5-nitrophthalamide (5) and N'-morpholino-N-(2'-methoxyphenyl)-4-nitrophthalamide (6) at 35 degrees C and 0.05 M NaOH as well as 0.05 M NaOD reveal the solvent deuterium kinetic isotope effect (= k(obs) (H 2) (O)/ k(obs) (D 2 ) (O)) as 1.6 for 1, 1.9 for 5, and 1.8 for 6. Product characterization study on the cleavage of 5, 6, and N-(2'-methoxyphenyl)-4-nitrophthalimide (7) at 0.5 M NaOD in D2O solvent shows the imide-intermediate mechanism as the exclusive mechanism.     

Association reactions at low pressure. III. The C2H2+/C2H2 system

The association reactions, C4H2(+) + C2H2 and C4H3(+) + C2H2 have been examined at pressures between 8 x 10(-8) and 1 x 10(-4) Torr at 298 K in an ion cyclotron resonance mass spectrometer. Association occurred via two different mechanisms. At pressures below approximately 2 x 10(-6) Torr, the association was bimolecular having rate coefficients k2 = 2.7 x 10(-10) cm3 s-1 and 2.0 x 10(-10) cm3 s-1 for C4H2+ and C4H3+, respectively. At pressures above approximately 2 x 10(-6) Torr, termolecular association was observed with rate coefficients, k3 = 5.7 x 10(-23) cm6 s-1 and 1.3 x 10(-23) cm6 s-1 for C4H2+ and C4H3+, respectively, when M = C2H2. The termolecular rate constants with N2, Ar, Ne, and He as the third body, M, are also reported. We propose that the low pressure bimolecular association process was the result of radiative stabilization of the complex and the termolecular association process was the result of collisional stabilization. Elementary rate coefficients were obtained and the lifetime of the collision complex was > or = 57 microseconds for (C6H4+)* and > or = 18 microseconds for (C6H5+)*. At pressures below 1 x 10(-6) Torr, approximately 11% of the (C6H4+)* were stabilized by photon emission and the remaining approximately 89% reverted back to reactants, while approximately 24% of the (C6H5+)* were stabilized by photon emission and the remaining approximately 76% reverted back to reactants. The ionic products of the C2H2(+) + C2H2 reaction, C4H2+ and C4H3+, were found to be formed with enough internal energy that they did not react by the radiative association channel until relaxed by several nonreactive collisions with the bath gas.     

Catalysis of the beta-elimination of HF from isomeric 2-fluoroethylpyridines and 1-methyl-2-fluoroethylpyridinium salts. Proton-activating factors and methyl-activating factors as a mechanistic test to distinguish between concerted E2 and E1cb irreversible mechanisms

Second-order rate constants, k(OH)(N), M(-)(1) s(-)(1), for the beta-elimination reactions of HF with 2-(2-fluoroethyl)pyridine (2), 3-(2-fluoroethyl)pyridine (3), and 4-(2-fluoroethyl)pyridine (4) in OH(-)/H(2)O, at 50 degrees C and mu = 1 M KCl, are = 0.646 x 10(-)(4) M(-)(1) s(-)(1), = 2.97 x 10(-)(6) M(-)(1) s(-)(1), and = 5.28 x 10(-)(4) M(-)(1) s(-)(1), respectively. When compared with the second-order rate constants for the same processes with the nitrogen-methylated substrates 1-methyl-2-(2-fluoroethyl)pyridinium iodide (5), 1-methyl-3-(2-fluoroethyl)pyridinium iodide (6), and 1-methyl-4-(2-fluoroethyl)pyridinium iodide (7), the methyl-activating factor (MethylAF) can be calculated from the ratio k(OH)(NCH)3/, and a value of 8.7 x 10(5) is obtained with substrates 5/2, a value of 1.6 x 10(3) with 6/3, and a value of 2.1 x 10(4) with 7/4. The high values of MethylAF are in agreement with an irreversible E1cb mechanism (A(N)D(E) + D(N)) for substrates 5 and 7 and with the high stability of the intermediate carbanion related to its enamine-type structure. In acetohydroxamate/acetohydroxamic acid buffers (pH 8.45-9.42) and acetate/acetic acid buffers (pH 4.13-5.13), the beta-elimination reactions of HF, with substrates 2 and 4, occur at NH(+), the substrates protonated at the nitrogen atom of the pyridine ring, even when the [NH(+)] is much lower than the [N], the unprotonated substrate, due to the high proton-activating factor (PAF) value observed: 3.6 x 10(5) for 2 and 6.5 x 10(4) for 4 with acetohydroxamate base. These high PAF values are indicative of an irreversible E1cb mechanism rather than a concerted E2 (A(N)D(E)D(N)) mechanism. Finally, the rate constant for carbanion formation from NH(+) with 2 is k(B)(NH)+ = 0.35 M(-)(1) s(-)(1), which is lower than when chlorine is the leaving group ( = 1.05 M(-)(1) s(-)(1); Alunni, S.; Busti, A. J. Chem. Soc., Perkin Trans. 2 2001, 778). This is direct experimental evidence that some lengthening of the carbon-leaving group bond can occur in the intermediate carbanion. This is a point of interest for interpreting a heavy-atom isotope effect.     

Redox properties of C6S8(n-) and C3S5(n-) (n = 0, 1, 2): stable radicals and unusual structural properties for C-S-S-C bonds

The new anionic carbon sulfides C6S10(2-) and C12S16(2-) are described and crystallographically characterized. The C12S16(2-) anion consists of two C6S8 units connected by an exceptionally long (2.157(12) A) S-S bond. In solution, C12S16(2-) exists in equilibrium with the radical C6S8(-*). The equilibrium constant for radical formation (293 K, THF) is 1.2 x 10(-4) M, as determined by optical spectroscopy at varying concentrations. Radical formation occurs through scission of the S-S bond. On the basis of variable temperature EPR spectra, the thermodynamic parameters of this process are DeltaH = +51.5 +/- 0.5 kJ x mol(-1) and DeltaS = +110 +/- 3 J x mol(-1) x K(-1). C6S10(2-) is an oxidation product of C3S5(2-) and consists of two C3S5 units connected by an S-S bond. The S-S bond length (2.135(4) A) is long, and the CS-SC torsion angle is unusually acute (52.1 degrees ), which is attributed to an attractive interaction between C3S2 rings. The oxidation of (Me4N)2C3S5 occurs at -0.90 V vs Fc+/Fc in MeCN, being further oxidized at -0.22 V. The similarity of the cyclic voltammogram of (Me4N)2C6S10 to that of (Me4N)2C3S5 indicates that C6S10(2-) is the initial oxidation product of C3S5(2-).     

Complex formation constants for the aqueous copper(I)-acetonitrile system by a simple general method

A simple spectrophotometric method for the evaluation of formation constants for aqueous copper(I) has been developed, based on the kinetics of reduction of Co(III)(NH(3))(5)X complexes. The method has been applied to the aqueous copper(I)-acetonitrile system to determine the successive formation constants beta(1), beta(2), and beta(3) as 4.3 x 10(2) M(-)(1), 1.0 x 10(4) M(-)(2), and 2.0 x 10(4) M(-)(3), respectively, in 0.14 M NaClO(4)/HClO(4) at 21 +/- 1 degrees C.     

Measurement of sulfite at oxide-coated copper electrodes

The amperometric determination of sulfite was performed using copper electrodes in alkaline media. A mechanism for the oxidation of sulfite at these electrodes is suggested, based on the formation of superficial CuO(.OH), which acted as an electron transfer mediator to the analyte. At 0.5 V versus SCE in 1 M NaOH, sulfite could be calibrated at a sensitivity of 0.2 A l mol-1 cm-2, with a response time for the steady state of 30 s. The limit of detection (three times the signal-to-noise ratio) was 2.5 x 10(-6) M and the response was linear up to 5 x 10(-4) M (r2 = 0.9996, n = 15). The standard deviation (n = 10) at 1 x 10(-5) and 1 x 10(-4) M was 3.27 x 10(-7) A cm-2 (mean = 3.62 x 10(-6) A cm-2) and 1.07 x 10(-13) A cm-2 (mean = 2.25 x 10(-5) A cm-2), respectively.     

Inhibitor scaffolds as new allele specific kinase substrates

The elucidation of protein kinase signaling networks is challenging due to the large size of the protein kinase superfamily (>500 human kinases). Here we describe a new class of orthogonal triphosphate substrate analogues for the direct labeling of analogue-specific kinase protein targets. These analogues were constructed as derivatives of the Src family kinase inhibitor PP1 and were designed based on the crystal structures of PP1 bound to HCK and N(6)-(benzyl)-ADP bound to c-Src (T338G). 3-Benzylpyrazolopyrimidine triphosphate (3-benzyl-PPTP) proved to be a substrate for a mutant of the MAP kinase p38 (p38-T106G/A157L/L167A). 3-Benzyl-PPTP was preferred by v-Src (T338G) (k(cat)/K(M) = 3.2 x 10(6) min(-)(1) M(-)(1)) over ATP or the previously described ATP analogue, N(6) (benzyl) ATP. For the kinase CDK2 (F80G)/cyclin E, 3-benzyl-PPTP demonstrated catalytic efficiency (k(cat)/K(M) = 2.6 x 10(4) min(-)(1) M(-)(1)) comparable to ATP (k(cat)/K(M) = 5.0 x 10(4) min(-)(1) M(-)(1)) largely due to a significantly better K(M) (6.4 microM vs 530 microM). In kinase protein substrate labeling experiments both 3-benzyl-PPTP and 3-phenyl-PPTP prove to be over 4 times more orthogonal than N(6)-(benzyl)-ATP with respect to the wild-type kinases found in murine spleenocyte cell lysates. These experiments also demonstrate that [gamma-(32)P]-3-benzyl-PPTP is an excellent phosphodonor for labeling the direct protein substrates of CDK2 (F80G)/E in murine spleenocyte cell lysates, even while competing with cellular levels (4 mM) of unlabeled ATP. The fact that this new more highly orthogonal nucleotide is accepted by three widely divergent kinases studied here suggests that it is likely to be generalizable across the entire kinase superfamily.     

Slowdown of H/D exchange reaction rate and water dynamics in ionic liquids: deactivation of solitary water solvated by small anions in 1-butyl-3-methyl-imidazolium chloride

The H/D exchange reaction and the rotational dynamics of heavy water (D2O) are studied at 50 degrees C in the ionic liquid, 1-butyl-3-methylimidazolium chloride ([bmim][Cl]), in the [D2O] range of 3-55 M. The initial H/D exchange rates are observed as 1.0 x 10(-7), 4.5 x 10(-6), 1.0 x 10(-5), 4.1 x 10(-5), 1.1 x 10(-4), and 3.7 x 10(-4) s(-1), respectively, at [D2O] of 2.8, 7.1, 8.1, 11, 15, and 25 M. The rate is very slow and less than 10(-5) s(-1) at [D2O] below approximately 7 M. It steeply increases to the order of 10(-4)s(-1) for 7 M < [D2O] < 10 M, and linearly increases with [D2O] in the more water-rich region. The intercept of the linear region at [D2O] = approximately 9 M is interpreted by considering that each chloride anion deactivates 1.6 equiv water molecules due to the strong solvation. Correspondingly, the rotational correlation time of D2O at [D2O] < 7 M is 1 order of magnitude larger than that in water-rich conditions.     

Kinetic coupled with UV spectral evidence for near-irreversible nonionic micellar binding of N-benzylphthalimide under the typical reaction conditions: an observation against a major assumption of the pseudophase micellar model

Pseudo-first-order rate constants (k(obs)) for alkaline hydrolysis of N-benzylphthalimide (1) show a nonlinear decrease with the increase in [C(m)E(n)]T (total concentration of Brij 58, m = 16, n = 20 and Brij 56, m = 16, n = 10) at constant [CH(3)CN] and [NaOH]. These nonionic micellar effects, within the certain typical reaction conditions, have been explained in terms of the pseudophase micellar (PM) model. The values of micellar binding constants (KS) of 1 are 1.04 x 10(3) M(-1) (at 1.0 x 10(-3) M NaOH) and 1.08 x 10(3) M(-1) (at 2.0 x 10(-3) M NaOH) for C(16)E(20) as well as 600 M(-1) (at 7.6 x 10(-4) M NaOH) and 670 M(-1) (at 1.0 x 10(-3) M NaOH) for C(16)E(10) micelles. The pseudo-first-order rate constants (kM) for hydrolysis of 1 in C(16)E(20) micellar pseudophase are approximately 90-fold smaller than those (kW) in water phase. The values of kM for hydrolysis of 1 in C(16)E(10) micelles are almost zero. Kinetic coupled with UV spectral data reveals significant irreversible nonionic micellar binding of 1 molecules in the micellar environment of nearly zero hydroxide ion concentration at >or=0.14 M C(16)E(20) and 1.0 x 10(-3) M NaOH while such observations could not be detected at or=3 x 10(-3) M C(16)E(10) and 7.6 x 10(-4) M NaOH, while the rate of hydrolysis of 1 is completely ceased at >or=0.05 M C(16)E(10) and 7.6 x 10(-4) M NaOH. The rate of hydrolysis of 1 at 5.0 x 10(-2) and 8.8 x 10(-2) M C(16)E(10) and 1.0 x 10(-3) M NaOH reveals the formation of presumably phthalic anhydride, whereas such observation was not observed in the C(16)E(20) micellar system under similar experimental conditions.     

Model studies of DNA C5' radicals. Selective generation and reactivity of 2'-deoxyadenosin-5'-yl radical

The reaction of hydrated electrons (e(aq)(-)) with 8-bromo-2'-deoxyadenosine has been investigated by radiolytic methods coupled with product studies and addressed computationally by means of DFT-B3LYP calculations. Pulse radiolysis revealed that this reaction was complete in approximately 0.3 mus, and, at this time, no significant absorption was detected. The spectrum of a transient developed in 20 mus has an absorbance in the range 300-500 nm (epsilon(max) congruent with 9600 M(-1) cm(-1) at 360 nm), and it was assigned to aromatic aminyl radical 3. Computed vertical transitions (TD-UB3LYP/6-311+G) are in good agreement with the experimental observations. Radical 3 is obtained by the following reaction sequence: one-electron reductive cleavage of the C-Br bond that gives the C8 radical, a fast radical translocation from the C8 to C5' position, and an intramolecular attack of the C5' radical at the C8,N7 double bond of the adenine moiety. The rate constant for the cyclization is 1.6 x 10(5) s(-1). On the basis of the theoretical findings, the cyclization step is highly stereospecific. The rate constants for the reactions of C5' and aminyl 3 radicals with different oxidants were determined by pulse radiolysis methods. The respective rate constants for the reaction of 2'-deoxyadenosin-5'-yl radical with dioxygen, Fe(CN)(6)(3)(-), and MV(2+) in water at ambient temperature are 1.9 x 10(9), 4.2 x 10(9), and 2.2 x 10(8) M(-1) s(-1). The value for the reaction of aminyl radical 3 with Fe(CN)(6)(3-) is 8.3 x 10(8) M(-1) s(-1), whereas the reaction with dioxygen is reversible. Tailored experiments allowed the reaction mechanism to be defined in some detail. A synthetically useful radical cascade process has also been developed that allows in a one-pot procedure the conversion of 8-bromo-2'-deoxyadenosine to 5',8-cyclo-2'-deoxyadenosine in a diastereoisomeric ratio (5'R):(5'S) = 6:1 and in high yield, by reaction with hydrated electrons in the presence of K(4)Fe(CN)(6).     

Conformational analysis of Na,K-ATPase in drug-protein complexes

This review reports the effects of several drugs such as AZT (anti-AIDS), cis-Pt (antitumor), aspirin (anti-inflammatory) and vitamin C (antioxidant) on the stability and conformation of Na,K-ATPase in vitro. Drug-enzyme binding was found to be via H-bonding to the polypeptide CO and C-N groups with two binding constants K(1(AZT))=5.30 (+/-2.1)x10(5)M(-1) and K(2(AZT))=9.80 (+/-2.9)x10(3)M(-1) for AZT and one binding constant K(cis)(-Pt)=1.93 (+/-1.2)x10(4)M(-1) for cis-Pt, K(aspirin)=6.45 (+/-2.5)x10(3)M(-1) and K(ascorbate)=1.04 (+/-0.5)x10(4)M(-1) for aspirin and ascorbic acid. The enzyme secondary structure was altered with major increase of alpha-helix from 19.9% (free protein) to 22-26% and reduction of beta-sheet from 25.6% (free protein) to 17-23% upon drug complexation indicating a partial stabilization of protein conformation. The order of induced stability is AZT>cis-Pt>ascorbate>aspirin.     

Metal ion catalysis in the beta-elimination reactions of N-[2-(4-pyridyl)ethyl]quinuclidinium and N-[2-(2-pyridyl)ethyl]quinuclidinium in aqueous solution

Catalysis of the beta-elimination reaction of N-[2-(4-pyridyl)ethyl]quinuclidinium (1) and N-[2-(2-pyridyl)ethyl]quinuclidinium (2) by Zn(2+) and Cd(2+) in OH(-)/H(2)O (pH = 5.20-6.35, 50 degrees C, and mu = 1 M KCl) has been studied. In the presence of Zn(2+), the elimination reactions of both isomers occur from the Zn(2+)-complexed substrates (C). The equilibrium constants for the dissociation of the Zn(2+)-complexes are as follows: K(d) = 0.012 +/- 0.003 M (isomer 1) and K(d) = 0.065 +/- 0.020 M (isomer 2). The value of k(C)(H2O) for isomer 1 is 4.81 x 10(-6) s(-1). For isomer 2 both the rate constants for the "water" and OH(-)-induced reaction of the Zn(2+)-complexed substrate could be measured, despite the low concentration of OH(-) in the investigated reaction mixture [k(C)H2O)= 1.97 x 10(-6) s(-1) and k(C)(OH-)= 21.9 M(-1) s(-1), respectively]. The measured metal activating factor (MetAF), i.e., the reactivity ratio between the complexed and the uncomplexed substrate, is 8.1 x 10(4) for the OH(-)-induced elimination of 2. This high MetAF can be compared with the corresponding proton activating factor (Alunni, S.; Conti, A.; Palmizio Errico, R. J. Chem. Soc., Perkin Trans. 2 2000, 453), PAF = 1.5 x 10(6) and is in agreement with an E1cb irreversible mechanism (A(xh)D(E)* + D(N)) (Guthrie, R. D.; Jencks, W. P. Acc. Chem. Res. 1989, 22, 343). A value of k(C)(H2O)>or= 23 x 10(-7) s(-1) is estimated for the Cd(2+)-complexed isomer 2, while catalysis by Cd(2+) has not been observed for isomer 1.     

Determination of the rate constant and product channels for the radical-radical reaction NCO(X 2Pi) + C2H5(X 2A') at 293 K

The rate constant and product branching ratios for the reaction of the cyanato radical, NCO(X (2)Pi), with the ethyl radical, C(2)H(5)(X (2)A'), have been measured over the pressure range of 0.28 to 0.59 kPa and at a temperature of 293 +/- 2 K. The total rate constant, k(1), increased with pressure, P(kPa), described by k(1) = (1.25 +/- 0.16) x 10(-10) + (4.22 +/- 0.35) x 10(-10)P cm(3) molecule(-1) s(-1). Three product channels were observed that were not pressure dependent: (1a) HNCO + C(2)H(4), k(1a) = (1.1 +/- 0.16) x 10(-10), (1b) HONC + C(2)H(4), k(1b) = (2.9 +/- 1.3) x 10(-11), (1c) HCN + C(2)H(4)O, k(1c) = (8.7 +/- 1.5) x 10(-13), with units cm(3) molecule(-1) s(-1) and uncertainties of one-standard deviation in the scatter of the data. The pressure dependence was attributed to a forth channel, (1d), forming recombination products C(2)H(5)NCO and/or C(2)H(5)OCN, with pressure dependence: (1d) k(1d) = (0.090 +/- 1.3) x 10(-11) + (3.91 +/- 0.27) x 10(-10)P cm(3) molecule(-1) s(-1). The radicals were generated by the 248 nm photolysis of ClNCO in an excess of C(2)H(6). Quantitative infrared time-resolved absorption spectrophotometry was used to follow the temporal dependence of the reactants and the appearance of the products. Five species were monitored, HCl, NCO, HCN, HNCO, and C(2)H(4), providing a detailed picture of the chemistry occurring in the system. Other rate constants were also measured: ClNCO + C(2)H(5), k(10) = (2.3 +/- 1.2) x 10(-13) , NCO + C(2)H(6), k(2) = (1.6 +/- 0.11) x 10(-14), NCO + C(4)H(10), k(4) = (5.3 +/- 0.51) x 10(-13), with units cm(3) molecule(-1) s(-1) and uncertainties of one-standard deviation in the scatter of the data.     

Solubilization of polyelectrolytic hairy-rod polyfluorene in aqueous solutions of nonionic surfactant

We report on the solubilization, phase behavior, and self-organized colloidal structure of a ternary water-polyfluorene-surfactant (amphiphile) system comprised of polyelectrolytic poly{1,4-phenylene[9,9-bis(4-phenoxybutylsulfonate)]fluorene-2,7-diyl} (PBS-PFP) in nonionic pentaethylene glycol monododecyl ether (C12E5) at 20 degrees C. We show in particular how a high amount (milligrams per milliliter) of polyfluorene can be solubilized by aqueous C12E5 via aggregate formation. The PBS-PFP and C12E5 concentrations of 0.31 x 10(-4)-5 x 10(-4) M and 2.5 x 10(-4)-75 x 10(-4) M, respectively, were used. Under the studied conditions, the photoluminescence (PL), surface tension, static contact angle, and (pi-A) isotherm measurements imply that D2O-PBS-PFP(C12E5)x realizes three phase regimes with an increasing molar ratio of surfactant over monomer unit (x). First, for x < or = 0.5, the mixture is cloudy. In this regime polymer is only partially dissolved. Second, for 1 < or = x < or = 2, the solution is homogeneous. In this regime polymer is dissolved down to the colloidal level. Small-angle neutron scattering (SANS) patterns indicate rigid elongated (polymer-surfactant) aggregates with a diameter of 30 A and mean length of approximately 900 A. The ratio between contour length and persistence length is less than 3. Third, for x > or = 4, the solution is homogeneous and there is cooperative binding between polymer and surfactant. Surface tension, contact angle, and surface pressure remain essentially constant with increasing x. A PL spectrum characteristic of single separated polyfluorene molecules is observed. SANS curves show an interference maximum at q approximately 0.015 A(-1), indicating an ordered phase. This ordering is suggested to be due to the electrostatic repulsion between polymer molecules adsorbed on or incorporated into the C12E5 aggregates (micelles). On dilution the distance between micelles increases via 3-dimensional packing. In this regime the polymer is potentially dissolved down to the molecular level. We show further that the aggregates (x = 2) form a floating layer at the air-water interface and can be transferred onto hydrophilic substrates.     

Fluoride ion complexation by a B(2)/Hg heteronuclear tridentate Lewis acid

The reaction of [Li(THF)(4)][1,8-mu-(Mes(2)B)C(10)H(6)] with HgCl(2) affords [1,1'-(Hg)-[8-(Mes(2)B)C(10)H(6)](2)] () or [1-(ClHg)-8-(Mes(2)B)C(10)H(6)] (), depending on the stoichiometry of the reagents. These two new compounds have been characterized by (1)H, (13)C, (11)B and (199)Hg NMR, elemental analysis and X-ray crystallography. The cyclic voltammogram of in THF shows two distinct waves observed at E(1/2) -2.31 V and -2.61 V, corresponding to the sequential reductions of the two boron centers. Fluoride titration experiments monitored by electrochemistry suggest that binds tightly to one fluoride anion and more loosely to a second one. Theses conclusions have been confirmed by a UV-vis titration experiment which indicates that the first fluoride binding constant (K(1)) is greater than 10(8) M(-1) while the second (K(2)) equals 5.2 (+/- 0.4) x 10(3) M(-1). The fluoride binding properties of have been compared to those of [1-(Me(2)B)-8-(Mes(2)B)C(10)H(6)] () and [1-((2,6-Me(2)-4-Me(2)NC(6)H(2))Hg)-8-(Mes(2)B)C(10)H(6)] (). Both experimental and computational results indicate that its affinity for fluoride anions is comparable to that of but significantly lower than that of the diborane . In particular, the fluoride binding constants of , and in chloroform are respectively equal to 5.0 (+/- 0.2) x 10(5) M(-1), 1.0 (+/- 0.2) x 10(3) M(-1) and 1.7 (+/- 0.1) x 10(3) M(-1). Determination of the crystal structures of the fluoride adducts [S(NMe(2))(3)][-mu(2)-F] and [S(NMe(2))(3)][-mu(2)-F] along with computational results indicate that the higher fluoride binding constant of arises from a strong chelate effect involving two fluorophilic boron centers.     

Speciation and kinetics related to catalytic carbonylation in the presence of cis-[Ir(CO)2I2]P(C6H5)4 under CO and H2 pressures

The differences in the reactivities of the square-planar complexes cis-[Rh(CO)2I2]- (1) and cis-[Ir(CO)2I2]- (2), involved in the catalytic carbonylation of olefins, are investigated, with P(C6H5)4+ as the counterion, by ambient- and high-pressure NMR and IR spectroscopy. Under an elevated pressure of CO, 1 and 2 form the [M(CO)3I] complexes with the equilibrium constants KIr approximately 1.8 x 10(-3) and KRh approximately 4 x 10(-5). The ratio KIr/KRh close to 50 shows that, under catalytic conditions (a few megapascals), only complex 1 remains in the anionic form, while a major amount of the iridium analogue 2 is converted to a neutral species. The oxidative addition reactions of HI with 1 and 2 give two monohydrides of different geometries, mer,trans-[HRh(CO)2I3]- (3) and fac,cis-[HIr(CO)2I3]- (4), respectively. Both hydrides are unstable at ambient temperature and form, within minutes for Rh and within hours for Ir, the corresponding cis-[M(CO)2I2]- (1 or 2) and [M(CO)2I4]- (5 or 6) species and H2. When an H2 pressure of 5.5 MPa is applied to a nitromethane solution of complex 2, ca. 50% of 2 is transformed to cis-dihydride complexes. The formation of cis,cis,cis-[IrH2(CO)2I2]- (8a) is followed by intermolecular rearrangements to form cis,trans,cis-[IrH2(CO)2I2]- (8b) and cis,cis,trans-[IrH2(CO)2I2]- (8c). A small amount of a dinuclear species, [Ir2H(CO)4I4]x- (9), is also observed. The formation rate constants for 8a and 8b at 262 K are k1(262) = (4.42 +/- 0.18) x 10(-4) M-1 s-1, k-1(262) = (1.49 +/- 0.07) x 10(-4) s-1, k2(262) = (2.81 +/- 0.04) x 10(-5) s-1, and k-2(262) = (5.47 +/- 0.16) x 10(-6) s-1. The two equilibrium constants K1(262) = [8a]/([2][H2]) = 2.97 +/- 0.03 M-1 and K2(262) = [8b]/[8a] = 5.13 +/- 0.10 show that complex 8b is the thermodynamically stable addition product. However, no similar H2 addition products of the rhodium analogue 1 are observed. The pressurization with H2 of a solution containing 2 and 6 give the monohydride 4, the dihydrides 8a and 8b, the dinuclear complex 9, and the two new complexes [Ir(CO)2I3] (10) and [HIr(CO)2I2] (11). The reactions of the iridium complexes with H2 and HI are summarized in a single scheme.     

A supramolecular receptor of diatomic molecules (O2, CO, NO) in aqueous solution

A per-O-methylated beta-cyclodextrin dimer, Py2CD, was conveniently prepared via two steps: the Williamson reaction of 3,5-bis(bromomethyl)pyridine and beta-cyclodextrin (beta-CD) yielding 2A,2'A-O-[3,5-pyridinediylbis(methylene)bis-beta-cyclodextrin (bisCD) followed by the O-methylation of all the hydroxy groups of the bisCD. Py2CD formed a very stable 1:1 complex (Fe(III)PCD) with [5,10,15,20-tetrakis(p-sulfonatophenyl)porphinato]iron(III) (Fe(III)TPPS) in aqueous solution. Fe(III)PCD was reduced with Na2S2O4 to afford the Fe (II)TPPS/Py2CD complex (Fe(II)PCD). Dioxygen was bound to Fe(II)PCD, the P(1/2)(O2) values being 42.4 +/- 1.6 and 176 +/- 3 Torr at 3 and 25 degrees C, respectively. The k(on)(O2) and k(off)(O2) values for the dioxygen binding were determined to be 1.3 x 10(7) M(-1) s(-1) and 3.8 x 10(3) s(-1), respectively, at 25 degrees C. Although the dioxygen adduct was not very stable (K(O2) = k(on)(O2)/k(off)(O2) = 3.4 x 10(3) M(-1)), no autoxidation of the dioxygen adduct of Fe(II)PCD to Fe(III)PCD was observed. These results suggest that the encapsulation of Fe (II)TPPS by Py2CD strictly inhibits not only the extrusion of dioxygen from the cyclodextrin cage but also the penetration of a water molecule into the cage. The carbon monoxide affinity of Fe(II)PCD was much higher than the dioxygen affinity; the P(1/2)(CO), k(on)(CO), k(off)(CO), and K(CO) values being (1.6 +/- 0.2) x 10(-2) Torr, 2.4 x 10(6) M(-1) s(-1), 4.8 x 10(-2) s(-1), and 5.0 x 10(7) M(-1), respectively, at 25 degrees C. Fe(II)PCD also bound nitric oxide. The rate of the dissociation of NO from (NO)Fe(II)PCD ((5.58 +/- 0.42) x 10(-5) s(-1)) was in good agreement with the maximum rate ((5.12 +/- 0.18) x 10(-5) s(-1)) of the oxidation of (NO)Fe(II)PCD to Fe(III)PCD and NO3(-), suggesting that the autoxidation of (NO)Fe(II)PCD proceeds through the ligand exchange between NO and O2 followed by the rapid reaction of (O2)Fe(II)PCD with released NO, affording Fe(II)PCD and the NO3(-) anion inside the cyclodextrin cage.     

Interaction of 2-chloronaphthalene with high carbon iron filings (HCIF): adsorption, dehalogenation and mass transfer limitations

Interaction of 2-chloronaphthalene (2-CN) with high-carbon iron filings (HCIF) was studied in anaerobic batch systems, both under well-mixed and poorly-mixed conditions. In well-mixed conditions, partitioning of 2-CN between solid and aqueous phases was fast, resulting in rapid attainment of equilibrium. Equilibrium partitioning could be described by a Freundlich isotherm, C(s)=K x [C(a)](m), where C(s) (micromoles g(-1) iron) and C(a) (micromoles L(-1)) were the solid and aqueous phase 2-CN concentrations, respectively. Isotherm parameters, m and K were determined to be 0.76 and 5.6 x 10(-2) (micromole g(-1) iron)/(micromole L(-1)), respectively. Sorption (k(2)) and desorption (k(3)) rate constants were determined to be 5.60 x 10(-1) h(-1) g(-1) iron L and 10 h(-1), respectively. Reductive dehalogenation of aqueous phase 2-CN occurred concurrently but at a slower rate, and could be described by the expression (dC(T)//dt)= -k(1) x M x (C(a))(N), where C(T) (micromoles L(-1)) was the total 2-CN concentration and M (g iron L(-1)) the concentration of HCIF. The values of k(1) and N were determined to be 1.09 x 10(-2) h(-1) g(-1) iron L and 1.647, respectively. In poorly mixed conditions, adsorption (k(2)) and desorption (k(3)) rate constants were 3.92 x 10(-5) h(-1) g(-1) iron L and 7 x 10(-4) h(-1), respectively, i.e., several orders of magnitude less than in well-mixed systems. The dehalogenation rate parameters, k(1) and N were determined to be 2.22 x 10(-4) h(-1) g(-1) iron L and 0.986, respectively, suggesting slower dehalogenation. These results highlight how mass-transfer limitations during the interaction between HCIF and 2-CN in poorly mixed systems, such as permeable reactive barriers (PRBs), can potentially impact the dehalogenation process.