Trinuclear π-cyclopentadienyl bridging sulphido derivatives of iron

The reaction of [Fe(π-C₅H₅)(CO)₂]₂ with the dialkyl disulphides R₂S₂ (R = CH₃, C₂H₅, t-C₄H₉ or CH₂C₆H₅) affords, as well as dinuclear derivatives of the type [Fe(π-C₅H₅)(CO)SR]₂, trinuclear species of formula [Fe₃(π-C₅H₅)₃(CO)₂(S)SR].     

Reactions of metal carbonyl derivatives : XIV. Bridged phosphido derivatives of iron and ruthenium

The tertiary phosphines P(C₆H₅)₂R [RM π-C₅H₅)(CO)₂ M(π-C₅H₅(CO)₂ (M = Fe or Ru)] readily effect the displacement of the chloro group in [M′(φ-C₅H₅)(CO)₂Cl] (M′ = Fe or Ru) to give bridged cationic species of the type [MM′(φ-C₅H₅)₂(CO)₄P(C₆H₅)]⁺. Treatment of [Fe₂(CO)₉] with P(C₆H₅)₂R [RRu(φ-C₅H₅)(CO)₂] leads to the formation of the neutral mixed-metal derivatives [FeRu(φ-C₅H₅)(CO)₆P(C₆H₅)₂] and [FeRu(φ-C₅H₅)(CO)₅P(C₆H₅)₂].     

Transition metal carbene complexes: IV. Synthesis and crystal structure of a novel iron-sulfur cluster carbene complex of rhenium—π-cyclopentadienyl(dicarbonyl)-{phenyl[(μ-phenylthio)hexacarbonyldiiron-(μ-thio)]carbene}rhenium

π-Cyclopentadienyl(dicarbonyl)(phenylcarbyne)rhenium-tetrabromoborate, [π-C₅H₅(CO)₂-ReCC₄H₅]BBr₄ (3), at low temperature reacts with (μ-phenylthio) (μ-thiolato)hexacarbonyldiiron anion, (μ-C₆H₅S) (μ-LiS)Fe₂(CO)₆ (2), to give π-cyclopentadienyl (dicarbonyl){phenyl[(μ-phenylthio)hexacarbonyldiiron (μ-thio)] carbene} rhenium, π-C₅H₅(CO)₂ReC(C₆H₅)(μ-S)(μ-C₆H₅S)Fe₂(CO)₆ (4). The complex 4 was identified by elemental analyses, IR, ¹H NMR and mass spectra, and finally confirmed by its single crystal X-ray structure determination. The results from spectroscopic experiments and X-ray diffraction were discussed.     

Electron-impact studies of organometallic molecules—VIII: Some transition metal derivatives of polyfluorobenzenes

The mass spectra of (π-C₅H₅)₂Ti(C₆F₅)X (X ? Cl and C₆F₅), C₆F₅Re(CO)₅, R_fFe(CO)₂(π-C₅H₅) (R_f ? C₆F₅, 4-HC₆F₄, and three isomeric H₂C₆F₃), and C₆F₅Ru(CO)₂(π-C₅H₅) are compared to those of C₆F₅X (X ? F, Cl, Br, I) and the three isomers of C₆F₄H₂. Significant differences occur, apparently depending on the relative thermodynamic stabilities of the various fragments which may be formed. Comparison of the mass spectra of pentafluorophenyl- and pentafluorobicyclo[2.2.0]hexa-2,5-dien-2-yl-Re(CO)₅ show that similar ions are produced by both complexes, perhaps because of thermal isomerisation before ionisation.     

Reactions of π-benzeneruthenium(II) complexes with alkylating reagents

The compounds (π-C₆H₆)Ru(R)Cl(PPh₃) (RCH₃, C₆H₅), (π-C₆H₆)RuCl(π-C₃H₅) and [(π-C₆H₆)Ru(π-C₅H₅)]Cl are described. The ³¹P NMR spectra of a series of tertiary phosphine complexes of the π-benzeneruthenium system are also reported.     

Synthesis and Spectra of Cationic Bis(tertiary phosphine) derivatives of cycloheptatrienyliummolybdenum and cyclopentadienyliron complexes

Reaction of [(η-C₇H₇)Mo(CO)₃][PF₆] and [(η-C₅H₅)Fe(CO)₂CH₃CN][PF₆] with ditertiary phosphine ligands afforded products of three types; the monosubstituted complexes [(Ring)M(CO)₂Ph₂P(CH₂)_nPPh₂][PF₆] (Ring = η-C₇H₇, M = Mo, N = 1; Ring = η-C₅H₅, M = Fe, N = 1 and 2), the chelated complexes [(Ring)M(CO)Ph₂P(CH₂)_nPPh₂][PF₆] (Ring = η-C₇H₇, M = Mo, N = 1 and 2; Ring = η-C₅H₅, M = Fe, N = 1 and 2), and the dinuclear complex [{(η-C₇H₇)Mo(CO)₂}₂ -μ- Ph₂PCH₂CH₂PPh₂][(PF₆)₂]. Spectroscopic properties, including ³¹P NMR, are reported.     

Syntheses, structures and reactivities of diindenyl-coordinated diiron bridging carbene complexes

Compound [Fe₂(μ-CO)₂(CO)₂(η⁵-C₉H₇)₂] (1) reacts with aryllithium reagents, ArLi (Ar = C₆H₅, p-CH₃C₆H₄, p-CF₃C₆H₄) followed by alkylation with Et₃OBF₄ to give the diindenyl-coordinated diiron bridging alkoxycarbene complexes [Fe₂{μ-C(OC₂H₅)Ar}(μ-CO)(CO)₂(η⁵-C₉H₇)₂] (2, Ar = C₆H₅; 3, Ar = p-CH₃C₆H₄, 4, Ar = p-CF₃C₆H₄). Complex 4 reacts with HBF₄ · Et₂O at low temperature to yield cationic bridging carbyne complex [Fe₂(μ-CC₆H₄CF₃-p)(μ-CO)(CO)₂(η⁵-C₉H₇)₂]BF₄ (5). Cationic 5 reacts with NaBH₄ in THF at low temperature to afford diiron bridging arylcarbene complex [Fe₂{μ-C(H)C₆H₄CF₃-p}(μ-CO)(CO)₂(η⁵-C₉H₇)₂] (6). The reaction of 5 with NaSC₆H₄CH₃-p under the similar conditions gave the bridging arylthiocarbene complex [Fe₂{μ-C(C₆H₄CF₃-p)SC₆H₄CH₃-p}(μ-CO)(CO)₂(η⁵-C₉H₇)₂] (7). Complex 5 can also react with carbonylmetal anionic compounds Na[M(CO)₅(CN)] (M = Cr, Mo, W) to produce the diiron bridging aryl(penta-carbonylcyanometal)carbene complexes [Fe₂{μ-C(C₆H₄CF₃-p)NCM(CO)₅}(μ-CO)(CO)₂(η⁵-C₉H₇)₂] (8, M = Cr; 9, M = Mo; 10, M = W). The structures of complexes 4, 6, 7, and 10 have been established by X-ray diffraction studies.     

Transition-metal mediated heteroatom removal by reactions of FeL+ [L=O,C4H6, c-C5H6, c-C5H5, C6H6, C5H4(=CH2)] with furan,thiophene, and pyrrole in the gas phase

Reactions of Fe⁺ and FeL⁺ [L=O, C₄H₆, c-C₅H₆, C₅H₅, C₆H₆, C₅H₄(=CH₂)] with thiophene, furan, and pyrrole in the gas phase by using Fourier transform mass spectrometry are described. Fe⁺, Fe(C₅H₅)⁺, and FeC₆H ₆ ⁺ yield exclusive rapid adduct formation with thiophene, furan, and pyrrole. In addition, the iron-diene complexes [FeC₄H ₆ ⁺ and Fe(c-C₅H₆)⁺], as well as FeC₅H₄(=CH₂)⁺ and FeO⁺, are quite reactive. The most intriguing reaction is the predominant direct extrusion of CO from furan by FeC₄H₆ ⁺, Fe(c-C₅H₆)⁺, and FeC₅H₄(=CH₂)⁺. In addition, FeC₄H ₆ ⁺ and Fe(c-C₅H₆)⁺ cause minor amounts of HCN extrusion from pyrrole. Mechanisms are presented for these CO and HCN extrusion reactions. The absence of CS elimination from thiophene may be due to the higher energy requirements than those for CO extrusion from furan or HCN extrusion from pyrrole. The dominant reaction channel for reaction of Fe(c-C₅H₆)⁺ with pyrrole and thiophene is hydrogen-atom displacement, which implies D^O(Fa(N₅H₅)⁺-C₄H₄X)>D^O(Fe(C₅H₅)⁺-H)=46±5 kcal mol^?1. D^O(Fe⁺-C₄H₄S) and D^O(Fe⁺-C₄H₅N)=D^O(Fe⁺-C₄H₆)=48±5 kcal mol^?1. Finally, 55±5 kcal mol^?1=D^O(Fe⁺-C₆H₆)>D^O(Fe⁺-C₄H₄O)>D^O(Fe⁺-C₂H₄)=39.9±1.4 kcal mol^?1. FeO⁺ reacts rapidly with thiophene, furan, and pyrrole to yield initial loss of CO followed by additional neutral losses. D^O(Fe⁺-CS)>D^O(Fe⁺-C₄H₄S)≈48±5 kcal mol^?1 and D^O(Fe⁺-C₄H₅N)≈48±5 kcal mol^?1>D^O(Fe⁺-HCN)>D^O(Fe⁺-C₂H₄)=39.9±1.4 kcal mil^?1.     

Phosphine-substituted diiron 1,2-dithiolate complexes as the models for the active site of [FeFe]-hydrogenases

Abstract

In this article, five diiron 1,2-dithiolate complexes containing phosphine ligands are reported. Treatment of complex [Fe₂(CO)₆(μ-SCH₂CH₂S)] (1) with the phosphine ligands tris(4-methylphenyl)phosphine, tris(4-methoxyphenyl)phosphine, tris(3-chlorophenyl)phosphine, tris(3-methylphenyl)phosphine, or 2-(diphenylphosphino)biphenyl in the presence of Me₃NO·2H₂O as the decarbonylating agent afforded the target products [Fe₂(CO)₅(L)(μ-SCH₂CH₂S)] [L?=?P(4-C₆H₄CH₃)₃, 2; P(4-C₆H₄OCH₃)₃, 3; P(3-C₆H₄Cl)₃, 4; P(3-C₆H₄CH₃)₃, 5; Ph₂P(2-C₆H₄Ph), 6] in 80–93% yields. Complexes 2–6 have been characterized by elemental analysis, spectroscopy, and X-ray crystallography. Additionally, the electrochemical properties were studied by cyclic voltammetry.     

Synthesis,characterization, and electrochemistry of phosphine-substituted diiron butane-1,2-dithiolate complexes

Abstract

The reactions of the starting complex, [Fe₂(CO)₆{μ-SCH₂CH (CH₂CH₃)S}] (1), with the phosphine ligands tris(4-methylphenyl)phosphine, diphenyl-2-pyridylphosphine, tris(4-fluorophenyl)phosphine, 2-(diphenylphosphino)benzaldehyde, or benzyldiphenylphosphine in the presence of the decarbonylating agent Me₃NO·2H₂O yielded the corresponding phosphine-substituted diiron butane-1,2-dithiolate complexes [Fe₂(CO)₅(L){μ-SCH₂CH(CH₂CH₃)S}] (L?=?P(4-C₆H₄CH₃)₃, 2; Ph₂P(2-C₅H₄N), 3; P(4-C₆H₄F)₃, 4; Ph₂P(2-C₆H₄CHO), 5; Ph₂PCH₂Ph, 6) in 75%–87% yields. The complexes have been characterized by elemental analysis, IR, ¹H, and ³¹P{¹H} NMR spectroscopy, as well as by single-crystal X-ray diffraction analysis. Moreover, the electrochemistry of 2–4 was studied by cyclic voltammetry, suggesting that they can catalyze the reduction of protons to H₂ in the presence of HOAc.     

Organische Phosphorverbindungen XXXVIII. Darstellung und Eigenschaften von Tris-(dialkoxyphosphonyl-methyl)-, Tris-(alkoxyphosphinyl-methyl)-und Tris-(oxophosphoranyl-methyl)-phosphinsäureestern sowie der entsprechenden Säuren [1]

Tris-chloromethyl-phosphine oxide, (ClCH₂₎₃ P?O(I), is obtained by chlorination of (HOCH₂₎₃P?O with PCl₅ or (C₆H₅₎₃PCl₂, and also by oxidation of (CICH₂₎₃P?O and (ClCh₂₎₂(CH₃)P?O. High yields of tris-(dialkyloxyphosphonly-methyl)-phosphine oxides, [RO₂(O)PCH_2]2P?O (II) (R?CH₃, C₂H₅, iso-C₃H₇, n-C₄H₉, 2- ethyl-hexyl), tris (alkyloxyphosphinyl-methyl)-phosphine oxides, [R₂(O)PCH_2]3P?O(R = C₆H₅, CH₃) are obtained by heating tris-chloromethyl-phosphine oxides, [(RO) (R′) (O)PCH_2]3P?O (R = C₄H₉, R′? C₆H₅) and tris-(oxophosphoranyl-phosphine oxides with phosphites, phosphonites and phosphinites, respectively, at 170–180°C for several hours. Compounds II possess an extraordinarily high absorption capacity. Thus a warm. 2% solution of II (R = C₂H₅) in benzene solidifies completely on cooling so that no benzene can be poured off. Tris-dihydroxyphosphonyl-methyl)-phosphine oxide, [(HO)₂(O)PCH_2]3P?O, obtained by hydrolysis of II (R ? C₂H₅) with refluxing conc. HCl or by thermal decomposition of II (R ? iso-C₃H₇) at 190°, titrates in aqueous solution as a hexabasic acid with breaks at pH = 4,4 (three equivalents) and pH = 10,7 (three equivalents). It forms crystalline salts with amines, alkali and alkaline earth metals, and is an excellent chelating agent. The ¹H- and ^31?P-NMR. spectra of all the compounds prepared are discussed.     

Coordination complexes of acetylenic phosphines and diphosphines

The reactions of π-cyclopentadienylnickel carbonyl dimer with 3,3,3-trimethylpropynyldiphenylphosphine and phenylethynyldiphenylphosphine are described. The products have been characterized by elemental and mass spectral analysis, infrared and NMR spectroscopy. An acetylene bridged complex (π-C₅H₅Ni)₂Ph₂PC₂-t-Bu, containing an uncoordinated phosphorus atom, has been prepared. The complex can be oxidized to the phosphine oxide derivative (π-C₅H₅Ni)₂Ph₂P(O)C₂-t-Bu and converted to the phosphonium salts with methyl iodide or ethyl bromide. These are the first reported π-complexes of phosphonium salts. The complex (π-C₅H₅Ni)₂Ph₂PC₂-t-Bu forms the novel mixed metal derivative [PdCl₂][(π-C₅H₅Ni)₂Ph₂PC₂-t-Bu]₂ from bis(benzonitrile)-palladium dichloride. The dicarbonyl complexes Ni(CO)₂(Ph₂PC₂R)₂ (R  t-Bu, Ph), the phosphine oxide complex (π-C₅H₅Ni)₂(Ph₂P(O)C₂Ph) and the trinuclear nickel carbonyl derivative Ni(CO)₃[(π-C₅H₅Ni)₂Ph₂PC₂Ph] are described.     

Synthesis and structures of complexes Os3(μ-H)2(CO)7(μ-RC5H3N){μ3-Ph2PCH2P(C6H4)Ph} (R = H, Me) with ortho-metalated pyridine ligands. The revised structure of the triosmium cluster ”Os3(μ-H)2(CO)7(μ-C6H4){μ3-Ph2PCH2P(C6H4)Ph}”

The structure of the previously synthesized triosmium cluster was revised. The structure Os₃(μ-H)₂(CO)₇(μ-C₆H₄){μ₃-Ph₂PCH₂P(C₆H₄)Ph} suggested earlier was not confirmed. The cluster has the composition Os₃(μ-H)₂(CO)₇(μ-C₅H₄N){μ₃-Ph₂PCH₂P(C₆H₄)Ph} and contains the ortho-metalated pyridine ligand. The X-ray diffraction study of the complex Os₃(μ-H)₂(CO)₇(μ-MeC₅H₃N){μ₃-Ph₂PCH₂P(C₆H₄)Ph} containing the ortho-metalated 4-methylpyridine ligand made it possible to distinguish between the C and N atoms of the pyridine ligands in the resulting triosmium clusters.     

Isonitrilsynthesen am komplex: V. Desulfurierung von isothiocyanaten in carbonylmetallat-additions-verbindungen

The isocyanide complexes [Fe(η-C₅H₅)(CO)₂CNR][PF₆] and Cr(CO)₅CNR (R = CH₃, C₆H₁₁, C₆H₅) are conveniently prepared at ?50°C from carbonyl metallates, isothiocyanates, and phosgene. At room temperature Na[Fe(η-C₅H₅)(CO)₂] reacts with isothiocyanates ($\text{1}\text{1}$) to give the isocyanide bridged complexes [Fe₂(η-C₅H₅)₂(μ-CO)(μ-CNR)(CO)₂].     

Reactions of metal carbonyl derivatives : XI. Tertiary phosphine,phosphite and stibine and ditertiaryphosphine and arsine derivatives of bis(μ-phenyl- sulphidotricarbonyliron)

The ditertiary phosphines (C₆H₅)₂P(CH₂)_nP(C₆H₅)₂ (n = 1 and 2), cis(C₆H₅)₂PC₂H₂P(C₆H₅)₂ and (C₆H₅)₂PN(C₂H₅)P(C₆H₅₂ and the ditertiary arsines (C₆H₅)₂As(CH₂)_nAs(C₆H₅)2 (_n = 1 and 2) react with [Fe(CO)₃SC₆H₅]₂ to give a wide range of products, the nature of which depends on the reaction conditions and the ligand involved. Examples of the different types of comp isolated include, (i) Fe₂(CO)₅[(C₆H₅)₂PCH₂P(C₆H₅)₂](SC₆H₅)₂, in which the ligand acts as a monodentate, (ii) {[Fe(CO)₂SC₆H₅]₂[(C₆H₅)₂PC₂H₄P(C₆H₅)₂]}₂, in which two [Fe(CO)₂SC₆H₅]₂ moieties are bridged by two diphosphine ligands, (iii) [Fe(CO)₂SC₆H₅]₂[(C₆H₅)₂PN(C₂H₅)P(C₆H₅)₂], in which the ligand bridges the two iron atoms, and (iv) Fe(CO)₃(SC₆H₅)₂Fe(CO)[(C₆H₅)₂PC₂H₂P(C₆H₅)₂], which contains the ligand chelated to a single iron atom. The tertiary phosphines PR₃ (R=C₂H₅ and C₆H₅), phosphites P(OR′)₃(R′ = CH₃, C₂H₅, i-C₃H₇ and C₆H₅) and the stibine Sb(C₆H₅)₃ bring about mono-, bis- or tris-substitution in [Fe(CO)₃SC₆H₅]₂ depending on the reaction conditions and the ligand involved. Whereas in solution [Fe(CO)₂L(SC₆H₅)]₂ [L = PR₃ (R = C₂H₅ and C₆H₅), P(OC₆H₅)₃ and Sb(C₆H₅)₃] exist as a single isomer, [Fe(CO)₂L′(SC₆H₅)]₂ [L′=P(OR′)₃ (R'=CH₃, C₂H₅ and i-C₃H₇)] occur as a mixture of isomers.     

Reactions of metal carbonyl derivatives : XIII. Reaction of bis[μ-(tert-butylsulphido)tricarbonyl-iron] with tertiary and ditertiary phosphines and phosphites

The ligands L  P(C₂H₅)₃, P(C₆H₅)₃, P(OCH₃)₃ and P(OC₆H₅)₃ react with [Fe(CO)₃(S-t-C₄H₉)]₂ to give mono-substituted Fe₂(CO)₅L(S-t-C₄H₉)₂ or bis-substituted [Fe(CO)₂L(S-t-C₄H₉)]₂ depending on the reaction conditions. With the exception of [Fe(CO)₂P(C₂H₅)₃(S-t-C₄H₉)]₂, the latter derivatives occur both in solution and in the solid state as a single isomer in which the ligands L are bonded trans to the metal-metal bond. Whereas an asymmetrically bis-substituted product, Fe(CO)₃(S-t-C₄H₉)₂Fe(CO)L' is formed in the reaction of [Fe(CO)₃(S-t-C₄H₉)]₂ with L' &2.dbnd; cis-(C₆H₅)₂PC₂H₂P(C₆H₅)₂, symmetrically bis-substituted derivatives [Fe(CO)₂(S-t-C₄H₉)]₂L', in which the ligand bridges the two iron atoms are produced in the corresponding reactions involving L'  (C₆H₅)₂P(CH_2nP(C₆H₅)₂ (n  1 and 2). The NMR spectrum of [Fe(CO)₂P(OCH₃)₃(S-t-C₄H₉)]₂, as well as those of the complexes [Fe(CO)₂P(OCH₃)₃SR]₂ (R  CH₃ and i-C₃H₇) which have also been synthesised in this study, is interpreted in terms of a virtual coupling effect.     

The stereospecificity at the iron center of the decarbonylation of an ironacetyl complex

The dinuclear complex [(h⁵-1-CH₃-3-C₆H₅C₅H₃)Fe(CO)₂]₂ was synthesized by reaction of Fe₂(CO)9 with 1-methyl-3-phenylcyclopentadiene; it was converted to (h⁵-1-CH₃-3-C₆H₅C₅H₃)Fe(CO)₂CH₃ by reduction with sodium amalgam and addition of CH₃l, and thence to (h⁵-1-CH₃-3-C₆H₅C₅H₃)Fe(CO)[P(C₆H₅)₃] (COCH₃) (I) by reaction with P(C₆H₅)₃. The acetyl I was separated into two diastereomerically related pairs of enantiomers. Ia and Ib, by a combination of column chromatography on alumina and crystallization from benzene/pentane. The photochemical decarbonylation of Ia and Ib in benzene or THF solution was examined by ¹H NMR spectroscopy. This reaction proceeds with high stereospecificity (>84% retention or inversion) at the iron center to yield (h⁵-1-CH₃-3-C₆H₈C₅H₃)Fe(CO)[P(C₆H₅)₃]CH₃(II), enriched in the diastereomerically related pairs of enantiomers, IIa and IIb, respectively. Since IIa and IIb epimerize under the photolytic conditions of decarbonylation, the actual stereospecificity of the conversion of I to II is higher than 84%, and likely 100%. This is supported by the data from kinetic studies of the decarbonylation of I and the epimerization of II, carried out under identical photolytic conditions. The implications of the foregoing results to the mechanism of the decarbonylation are considered. Also described herein is the synthesis of other complexes with two asymmetric centers of the general formula (h⁵-cyclopentadienyl)Fe(CO)(L)(COR) and (h⁵-cyclopentadienyl)Fe(CO)(L)R that contain either an unsymmetrically substituted h⁵-cyclopentadienyl ring or a chiral tertiary phosphine.     

Reaction of [Ru3(CO)12] with tri(2-furyl)phosphine: Di- and tri-substituted triruthenium and phosphido-bridged diruthenium complexes

Reaction of [Ru₃(CO)₁₂] with tri(2-furyl)phosphine, P(C₄H₃O)₃, at 40 °C in the presence of a catalytic amount of Na[Ph₂CO] furnishes two triruthenium complexes [Ru₃(CO)₁₀{P(C₄H₃O)₃}₂] (1) and [Ru₃(CO)₉{P(C₄H₃O)₃}₃] (2) with the ligand coordinated through the phosphorus atom. Treatment of 1 and 2 with Me₃NO at 40 °C affords the dinuclear phosphido-bridged complexes [Ru₂(CO)₆(μ-η¹,η²-C₄H₃O){μ-P(C₄H₃O)₂}] (3) and [Ru₂(CO)₅(μ-η¹,η²-C₄H₃O){μ-P(C₄H₃O)₂}{P(C₄H₃O)₃}] (4), respectively, that are formed via phosphorus–carbon bond cleavage of a coordinated phosphine followed by coordination of the dissociated furyl moiety to the diruthenium center in a σ,π-alkenyl mode. Reaction of [Ru₃(CO)₁₂] with tri(2-furyl)phosphine in refluxing benzene gives, in addition to 3 and 4, low yields of the cyclometallated complex [Ru₃(CO)₉{μ-η¹,η¹-P(C₄H₃O)₂(C₄H₂O)}₂] (5). Treatment of 3 with EPh₃ (E = P, As, Sb) at room temperature yields the monosubstituted derivatives [Ru₂(CO)₅(μ-η¹,η²-C₄H₃O){μ-P(C₄H₃O)₂}(EPh₃)] (E = P, 8; E = As, 9; E = Sb, 10). Similar reactions of 3 with P(C₄H₃O)₃, P(OMe)₃ and Bu^tNC yield 4, [Ru₂(CO)₅(μ-η¹,η²-C₄H₃O){μ-P(C₄H₃O)₂}{P(OMe)₃}] (11) and [Ru₂(CO)₅(μ-η¹,η²-C₄H₃O){μ-P(C₄H₃O)₂}(NCBu^t)] (12), respectively. The molecular structures of complexes 3, 4 and 8 have been elucidated by single crystal X-ray diffraction studies. Each complex contains a bridging σ,π-alkenyl group and while in 4 the phosphine is bound to the σ-coordinated metal atom, in 8 it is at the π-bound atom. Protonation of 3 and 4 gives the hydride complexes [(μ-H)Ru₂(CO)₆(μ-η¹,η²-C₄H₃O){μ-P(C₄H₃O)₂}]⁺ (6) and [(μ-H)Ru₂(CO)₅(μ-η¹,η²-C₄H₃O){μ-P(C₄H₃O)₂}{P(C₄H₃O)₃}]⁺ (7), respectively, while heating 3 with dimethylacetylenedicarboxylate (DMAD) in refluxing toluene gives the cyclotrimerization product, C₆(CO₂Me)₆.     

Synthetic and structural studies of the diiron toluenedithiolate carbonyl complexes with monophosphine ligands

Four diiron toluenedithiolate complexes 2–5 with monophosphine ligands are reported. Treatment of [μ-SC₆H₃(CH₃)S-μ]Fe₂(CO)₆ (1) with tris(3-chlorophenyl)phosphine, tris(4-chlorophenyl)phosphine, tris(4-methylphenyl)phosphine or 2-(diphenylphosphino)benzaldehyde, and Me₃NO?2H₂O in MeCN resulted in the formation of [μ-SC₆H₃(CH₃)S-μ]Fe₂(CO)₅[P(3-C₆H₄Cl)₃] (2), [μ-SC₆H₃(CH₃)S-μ]Fe₂(CO)₅[P(4-C₆H₄Cl)₃] (3), [μ-SC₆H₃(CH₃)S-μ]Fe₂(CO)₅[P(4-C₆H₄CH₃)₃] (4), and [μ-SC₆H₃(CH₃)S-μ]Fe₂(CO)₅[Ph₂P(2-C₆H₄CHO)] (5) in 64–82% yields. Complexes 2–5 have been characterized by elemental analysis, IR, ¹H NMR, ³¹P{¹H} NMR, ¹³C{¹H} NMR and further confirmed by single crystal X-ray diffraction analysis. The molecular structures show that 2–5 contain a butterfly diiron toluenedithiolate cluster coordinated by five terminal carbonyls and an apical monophosphine.