The catalytic mechanism of peptidylglycine alpha-hydroxylating monooxygenase investigated by computer simulation

The molecular basis of the hydroxylation reaction of the Calpha of a C-terminal glycine catalyzed by peptidylglycine alpha-hydroxylating monooxygenase (PHM) was investigated using hybrid quantum-classical (QM-MM) computational techniques. We have identified the most reactive oxygenated species and presented new insights into the hydrogen abstraction (H-abstraction) mechanism operative in PHM. Our results suggest that O(2) binds to Cu(B) to generate Cu(B)(II)-O(2)(.-) followed by electron transfer (ET) from Cu(A) to form Cu(B)(I)-O(2)(.-). The computed potential energy profiles for the H-abstraction reaction for Cu(B)(II)-O(2)(.-), Cu(B)(I)-O(2)(.-), and [Cu(B)(II)-OOH](+) species indicate that none of these species can be responsible for abstraction. However, the latter species can spontaneously form [Cu(B)O](+2) (which consists of a two-unpaired-electrons [Cu(B)O](+) moiety ferromagnetically coupled with a radical cation located over the three Cu(B) ligands, in the quartet spin ground state) by abstracting a proton from the surrounding solvent. Both this monooxygenated species and the one obtained by reduction with ascorbate, [Cu(B)O](+), were found to be capable of carrying out the H-abstraction; however, whereas the former abstracts the hydrogen atom concertedly with almost no activation energy, the later forms an intermediate that continues the reaction by a rebinding step. We propose that the active species in H-abstraction in PHM is probably [Cu(B)O](+2) because it is formed exothermically and can concertedly abstract the substrate HA atom with the lower overall activation energy. Interestingly, this species resembles the active oxidant in cytochrome P450 enzymes, Compound I, suggesting that both PHM and cytochrome P450 enzymes may carry out substrate hydroxylation by using a similar mechanism.     

H-atom abstraction reaction for organic substrates via mononuclear copper(II)-superoxo species as a model for DbetaM and PHM

Hydrogen atom abstraction reactions have been implicated in oxygenation reactions catalyzed by copper monooxygenases such as peptidylglycine alpha-hydroxylating monooxygenase (PHM) and dopamine beta-monooxygenase (DbetaM). We have investigated mononuclear copper(I) and copper(II) complexes with bis[(6-neopentylamino-2-pyridyl)methyl][(2-pyridyl)methyl]amine (BNPA) as functional models for these enzymes. The reaction of [Cu(II)(bnpa)]2+ with H2O2, affords a quasi-stable mononuclear copper(II)-hydroperoxo complex, [Cu(II)(bnpa)(OOH)]+ (4) which is stabilized by hydrophobic interactions and hydrogen bonds in the vicinity of the copper(II) ion. On the other hand, the reaction of [Cu(I)(bnpa)]+ (1) with O2 generates a trans-mu-1,2-peroxo dicopper(II) complex [Cu(II)2(bnpa)2(O2(2-]2+ (2). Interestingly, the same reactions carried out in the presence of exogenous substrates such as TEMPO-H, produce a mononuclear copper(II)-hydroperoxo complex 4. Under these conditions, the H-atom abstraction reaction proceeds via the mononuclear copper(II)-superoxo intermediate [Cu(II)(bnpa)(O2-)]+ (3), as confirmed from indirect observations using a spin trap reagent. Reactions with several substrates having different bond dissociation energies (BDE) indicate that, under our experimental conditions the H-atom abstraction reaction proceeds for substrates with a weak X-H bond (BDE < 72.6 kcal mol(-1)). These investigations indicate that the copper(II)-hydroperoxo complex is a useful tool for elucidation of H-atom abstraction reaction mechanisms for exogenous substrates. The useful functionality of the complex has been achieved via careful control of experimental conditions and the choice of appropriate ligands for the complex.     

Conversion of methane to methanol at the mononuclear and dinuclear copper sites of particulate methane monooxygenase (pMMO): a DFT and QM/MM study

Methane hydroxylation at the mononuclear and dinuclear copper sites of pMMO is discussed using quantum mechanical and QM/MM calculations. Possible mechanisms are proposed with respect to the formation of reactive copper-oxo and how they activate methane. Dioxygen is incorporated into the Cu(I) species to give a Cu(II)-superoxo species, followed by an H-atom transfer from a tyrosine residue near the monocopper active site. A resultant Cu(II)-hydroperoxo species is next transformed into a Cu(III)-oxo species and a water molecule by the abstraction of an H-atom from another tyrosine residue. This process is accessible in energy under physiological conditions. Dioxygen is also incorporated into the dicopper site to form a (mu-eta(2):eta(2)-peroxo)dicopper species, which is then transformed into a bis(mu-oxo)dicopper species. The formation of this species is more favorable in energy than that of the monocopper-oxo species. The reactivity of the Cu(III)-oxo species is sufficient for the conversion of methane to methanol if it is formed in the protein environment. Since the sigma orbital localized in the Cu-O bond region is singly occupied in the triplet state, this orbital plays a role in the homolytic cleavage of a C-H bond of methane. The reactivity of the bis(mu-oxo)dicopper species is also sufficient for the conversion of methane to methanol. The mixed-valent bis(mu-oxo)Cu(II)Cu(III) species is reactive to methane because the amplitude of the sigma singly occupied MO localized on the bridging oxo moieties plays an essential role in C-H activation.     

Copper-hydroperoxo-mediated N-debenzylation chemistry mimicking aspects of copper monooxygenases

A substantial oxidative N-debenzylation reaction along with PhCHO formation occurs from a hydroperoxo-copper(II) complex that has a dibenzylamino substrate (N(CH 2Ph) 2 appended as a substituent on one pyridyl group of its tripodal tetradentate TMPA (also TPA, (2-pyridylmethyl)amine)) ligand framework. During the course of the (L (N(CH 2 ) (Ph) 2 ))Cu (II)( (-)OOH) reactivity, the formation of a substrate and a (-)OOH-derived (an oxygen atom) alkoxo Cu (II)( (-)OR) complex occurs. The observation that the same Cu (II)( (-)OR) species occurs from Cu (Iota)/PhIO chemistry suggests the possibility that a copper-oxo (cupryl) reactive intermediate forms during the alkoxo species formation; new ESI-MS data provide further support for this high-valent intermediate. A net H atom abstraction chemistry is proposed on the basis of the kinetic isotope effect studies provided here and the previously published study for a closely related Cu (II)( (-)OOH) species incorporating dimethylamine (N(CH 3) 2) as the internal substrate; the Cu (Iota)/PhIO reactivity with similar isotope effect results provides further support. The reactivity of these chemical systems closely resembles the proposed oxidative N-dealkylation mechanisms that are effected by the copper monooxygenases, dopamine beta-monooxygenase (DbetaM) and peptidylglycine- alpha-hydroxylating monooxygenase (PHM).     

Direct hydrogen-atom abstraction by activated bleomycin: an experimental and computational study

Bleomycin (BLM), a glycopeptide antibiotic chemotherapy agent, is capable of single- and double-strand DNA damage. Activated bleomycin (ABLM), a low-spin Fe(III)-OOH complex, is the last intermediate detected prior to DNA cleavage following hydrogen-atom abstraction from the C-4' of a deoxyribose sugar moiety. The mechanism of this C-H bond cleavage reaction and the nature of the active oxidizing species are still open issues. We have used kinetic measurements in combination with density functional calculations to study the reactivity of ABLM and the mechanism of the initial attack on DNA. Circular dichroism spectroscopy was used to directly monitor the kinetics of the ABLM reaction. These experiments yield a deuterium isotope effect, kH/kD approximately 3 for ABLM decay, indicating the involvement of a hydrogen atom in the rate-determining step. H-atom donors with relatively weak X-H bonds accelerate the reaction rate, establishing that ABLM is capable of hydrogen-atom abstraction. Density functional calculations were used to evaluate the two-dimensional potential energy surface for the direct hydrogen-atom abstraction reaction of the deoxyribose 4'-H by ABLM. The calculations confirm that ABLM is thermodynamically and kinetically competent for H-atom abstraction. The activation and reaction energies for this pathway are favored over both homolytic and heterolytic O-O bond cleavage. Direct H-atom abstraction by ABLM would generate a reactive Fe(IV)=O species, which would be capable of a second DNA strand cleavage, as observed in vivo. This study provides experimental and theoretical evidence for direct H-atom abstraction by ABLM and proposes an attractive mechanism for the role of ABLM in double-strand cleavage.     

Dioxygen activation at a mononuclear Cu(I) center embedded in the calix[6]arene-tren core

The reaction of a cuprous center coordinated to a calix[6]arene-based aza-cryptand with dioxygen has been studied. In this system, Cu(I) is bound to a tren unit that caps the calixarene core at the level of the small rim. As a result, although protected from the reaction medium by the macrocycle, the metal center presents a labile site accessible to small guest ligands. Indeed, in the presence of O2, it reacts in a very fast and irreversible redox process, leading, ultimately, to Cu(II) species. In the coordinating solvent MeCN, a one electron exchange occurs, yielding the corresponding [CalixtrenCu-MeCN](2+) complex with concomitant release of superoxide in the reaction medium. In a noncoordinating solvent such as CH2Cl2, the dioxygen reaction leads to oxygen insertions into the ligand itself. Both reactions are proposed to proceed through the formation of a superoxide-Cu(II) intermediate that is unstable in the Calixtren environment due to second sphere effects. The transiently formed superoxide ligand either undergoes fast substitution for a guest ligand (in MeCN) or intramolecular redox evolutions toward oxygenation of Calixtren. Interestingly, the latter process was shown to occur twice on the same ligand, thus demonstrating a possible catalytic activation of O2 at a single cuprous center. Altogether, this study illustrates the oxidizing power of a [CuO2](+) adduct and substantiates a mechanism by which copper mono-oxygenases such as DbetaH and PHM activate O2 at the Cu(M) center to produce such an intermediate capable of C-H breaking before the electron input provided by the noncoupled Cu(H) center.     

Catalytic mechanism of dopamine beta-monooxygenase mediated by Cu(III)-oxo

Mechanisms of dopamine hydroxylation by the Cu(II)-superoxo species and the Cu(III)-oxo species of dopamine beta-monooxygenase (DBM) are discussed using QM/MM calculations for a whole-enzyme model of 4700 atoms. A calculated activation barrier for the hydrogen-atom abstraction by the Cu(II)-superoxo species is 23.1 kcal/mol, while that of the Cu(III)-oxo, which can be viewed as Cu(II)-O*, is 5.4 kcal/mol. Energies of the optimized radical intermediate in the superoxo- and oxo-mediated pathways are 18.4 and -14.2 kcal/mol, relative to the corresponding reactant complexes, respectively. These results demonstrate that the Cu(III)-oxo species can better mediate dopamine hydroxylation in the protein environment of DBM. The side chains of three amino acid residues (His415, His417, and Met490) coordinate to the Cu(B) atom, one of the copper sites in the catalytic core that plays a role for the catalytic function. The hydrogen-bonding network between dopamine and the three amino acid residues (Glu268, Glu369, and Tyr494) plays an essential role in substrate binding and the stereospecific hydroxylation of dopamine to norepinephrine. The dopamine hydroxylation by the Cu(III)-oxo species is a downhill and lower-barrier process toward the product direction with the aid of the protein environment of DBM. This enzyme is likely to use the high reactivity of the Cu(III)-oxo species to activate the benzylic C-H bond of dopamine; the enzymatic reaction can be explained by the so-called oxygen rebound mechanism.     

Effects of thioether substituents on the O2 reactivity of beta-diketiminate-Cu(I) complexes: probing the role of the methionine ligand in copper monooxygenases

The activation of dioxygen by dopamine beta-monooxygenase (DbetaM) and peptidylglycine alpha-hydroxylating monooxygenase (PHM) is postulated to occur at a copper site ligated by two histidine imidazoles and a methionine thioether, which is unusual because such thioether ligation is not present in other O2-activating copper proteins. To assess the possible role of the thioether ligand in O2 activation by DbetaM and PHM, two new ligands comprising beta-diketiminates with thioether substituents were synthesized and Cu(I) and Cu(II) complexes were isolated. The Cu(II) compounds are monomeric and exhibit intramolecular thioether coordination. While the Cu(I) complexes exhibit a multinuclear topology in the solid state, variable-temperature 1H NMR studies implicate equilibria in solution, possibly including monomers with intramolecular thioether coordination that are structurally defined by DFT calculations. Low-temperature oxygenation of solutions of the Cu(I) complexes generates stable 1:1 Cu/O2 adducts, which on the basis of combined experimental and theoretical studies adopt side-on "eta(2)" structures with negligible Cu-thioether bonding and significant peroxo-Cu(III) character. In contrast to previously reported findings with related ligands lacking the thioether group, however (cf., Aboelella; et al. J. Am. Chem. Soc. 2004, 126, 16896), purging the solutions of the thioether-containing adducts with argon results in conversion to bis(mu-oxo)dicopper(III) species. A role for the thioether in promoting loss of O2 from the 1:1 Cu/O2 adduct and facilitating trapping of the resulting Cu(I) complex to yield the bis(mu-oxo) species is proposed, and the possible relevance of this role to that of the methionine in the active sites of DbetaM and PHM is discussed.     

Intramolecular arene hydroxylation versus intermolecular olefin epoxidation by (mu-eta2:eta2-peroxo)dicopper(II) complex supported by dinucleating ligand

A discrete (mu-eta2:eta2-peroxo)Cu(II)2 complex, [Cu2(O2)(H-L)]2+, is capable of performing not only intramolecular hydroxylation of a m-xylyl linker of a dinucleating ligand but also intermolecular epoxidation of styrene via electrophilic reaction to the C=C bond and hydroxylation of THF by H-atom abstraction.     

A chromium(III)-superoxo complex in oxygen atom transfer reactions as a chemical model of cysteine dioxygenase

Metal-superoxo species are believed to play key roles in oxygenation reactions by metalloenzymes. One example is cysteine dioxygenase (CDO) that catalyzes the oxidation of cysteine with O(2), and an iron(III)-superoxo species is proposed as an intermediate that effects the sulfoxidation reaction. We now report the first biomimetic example showing that a chromium(III)-superoxo complex bearing a macrocyclic TMC ligand, [Cr(III)(O(2))(TMC)(Cl)](+), is an active oxidant in oxygen atom transfer (OAT) reactions, such as the oxidation of phosphine and sulfides. The electrophilic character of the Cr(III)-superoxo complex is demonstrated unambiguously in the sulfoxidation of para-substituted thioanisoles. A Cr(IV)-oxo complex, [Cr(IV)(O)(TMC)(Cl)](+), formed in the OAT reactions by the chromium(III)-superoxo complex, is characterized by X-ray crystallography and various spectroscopic methods. The present results support the proposed oxidant and mechanism in CDO, such as an iron(III)-superoxo species is an active oxidant that attacks the sulfur atom of the cysteine ligand by the terminal oxygen atom of the superoxo group, followed by the formation of a sulfoxide and an iron(IV)-oxo species via an O-O bond cleavage.     

Tale of a twist: magnetic and optical switching in copper(II) semiquinone complexes

An intermediate (C) that is observed in both phenol hydroxylation and catechol oxidation with the side-on peroxide species [Cu(2)O(2)(DBED)(2)](2+) (DBED = N(1),N(2)-di-tert-butylethane-1,2-diamine) is identified as a copper(II) semiquinone species ([1](+)) through independent synthesis and characterization. The reaction of the redox-active 3,5-di-tert-butylquinone ligand with [(DBED)Cu(I)(MeCN)](+) yields a copper(II) semiquinone [1](+) complex with a singlet ground state and an intense purple chromophore (ε(580) ~ 3500 M(-1) cm(-1)). All other copper(II) semiquinone complexes characterized to date are paramagnetic and weakly colored (ε(800) ~ 500 M(-1) cm(-1)). Antiferromagnetic coupling between the Cu(II) center and the semiquinone radical in [1](+) is characterized by paramagnetic (1)H NMR and SQUID magnetometry. Comparative X-ray crystal structures along with density functional theory calculations correlate the geometric structures of copper(II) semiquinone complexes with their magnetic and optical properties. The unique observable properties of [1](+) originate from an increase in the overlap of the Cu 3d and semiquinone π orbitals resulting from a large rhombic distortion in the structure with a twist of 51°, attributable to the large isotropic demands of the tert-butyl substituents of the DBED ligand. Independent characterization of [1](+) allows the spectroscopic yields of intermediate C to be quantified in this intriguing hydroxylation reaction.     

Electronic tuning of beta-diketiminate ligands with fluorinated substituents: effects on the O2-reactivity of mononuclear Cu(I) complexes

Copper(i) complexes with the beta-diketiminate ligands HC{C(R)N(Dipp)}{C(R')N(Dipp)}(-) (Dipp = C(6)H(3)(i)Pr(2-)2,6; L(1), R = CF(3), R' = CH(3); L(2), R = R' = CF(3)) have been isolated and fully characterized. On the basis of X-ray structural comparisons with the previously reported complex LCu(CH(3)CN) (L = HC{C(CH(3))N(Dipp)}(2)(-)), the ligand environments at the copper centers in the analogous nitrile adducts with L(1) and L(2) impose similar steric demands. L(1)Cu(CH(3)CN) reacts instantaneously at low temperature with O(2) to form a thermally-unstable intermediate with an isotope-sensitive vibration at 977 cm(-1) (928 cm(-1) with (18)O(2)), in accord with the peroxo O-O stretch associated with side-on coordination for LCu(O(2)). However, L(2)Cu(CH(3)CN) is unreactive toward O(2) even at room temperature. Evaluation of the redox potentials of the nitrile adducts and the CO stretching frequencies of the carbon monoxide adducts revealed an incremental adjustment of the electronic environment at the copper center that correlated with the extent of ligand fluorination. Furthermore, theoretical calculations (DFT, CASPT2) predicted that an increasing extent of Cu(ii)-superoxo character and end-on coordination of the O(2) moiety in the Cu/O(2) product (L(2) > L(1) > L) are accompanied by increases in the free energy for the oxygenation reaction, with L(2) unable to support a Cu/O(2) intermediate. Calculations also predict the 1 : 1 Cu/O(2) adducts to be unreactive with respect to hydrogen atom abstraction from hydrocarbon substrates on the basis of their stability towards both reduction and protonation.     

Fe(IV)═O(TBC)(CH3CN)]2+: comparative reactivity of iron(IV)-oxo species with constrained equatorial cyclam ligation

[Fe(IV)═O(TBC)(CH(3)CN)](2+) (TBC = 1,4,8,11-tetrabenzyl-1,4,8,11-tetraazacyclotetradecane) is characterized, and its reactivity differences relative to [Fe(IV)═O(TMC)(CH(3)CN)](2+) (TMC = 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane) are evaluated in hydrogen atom (H-atom) abstraction and oxo-transfer reactions. Structural differences are defined using X-ray absorption spectroscopy and correlated to reactivities using density functional theory. The S = 1 ground states are highly similar and result in large activation barriers (~25 kcal/mol) due to steric interactions between the cyclam chelate and the substrate (e.g., ethylbenzene) associated with the equatorial π-attack required by this spin state. Conversely, H-atom abstraction reactivity on an S = 2 surface allows for a σ-attack with an axial substrate approach. This results in decreased steric interactions with the cyclam and a lower barrier (~9 kcal/mol). For [Fe(IV)═O(TBC)(CH(3)CN)](2+), the S = 2 excited state in the reactant is lower in energy and therefore more accessible at the transition state due to a weaker ligand field associated with the steric interactions of the benzyl substituents with the trans-axial ligand. This study is further extended to the oxo-transfer reaction, which is a two-electron process requiring both σ- and π-electron transfer and thus a nonlinear transition state. In oxo-transfer, the S = 2 has a lower barrier due to sequential vs concerted (S = 1) two electron transfer which gives a high-spin ferric intermediate at the transition state. The [Fe(IV)═O(TBC)(CH(3)CN)](2+) complex is more distorted at the transition state, with the iron farther out of the equatorial plane due to the steric interaction of the benzyl groups with the trans-axial ligand. This allows for better orbital overlap with the substrate, a lower barrier, and an increased rate of oxo-transfer.     

Kinetic and spectroscopic studies of N694C lipoxygenase: a probe of the substrate activation mechanism of a nonheme ferric enzyme

Lipoxygenases (LOs) comprise a class of substrate activating mononuclear nonheme iron enzymes which catalyze the hydroperoxidation of unsaturated fatty acids. A commonly proposed mechanism for LO catalysis involves H-atom abstraction by an FeIII-OH- site, best described as a proton coupled electron transfer (PCET) process, followed by direct reaction of O2 with the resulting substrate radical to yield product. An alternative mechanism that has also been discussed involves the abstraction of a proton from the substrate by the FeIII-OH leading to a sigma-organoiron intermediate, where the subsequent sigma bond insertion of dioxygen into the C-Fe bond completes the reaction. H-atom abstraction is favored by a high E(o) of the FeII/FeIII couple and high pK(a) of water bound to the ferrous state, while an organoiron mechanism would be favored by a low E(o) (to keep the site oxidized) and a high pK(a) of water bound to the ferric state (to deprotonate the substrate). A first coordination sphere mutant of soybean LO (N694C) has been prepared and characterized by near-infrared circular dichroism (CD) and variable-temperature, variable-field (VTVH) magnetic circular dichroism (MCD) spectroscopies (FeII site), as well as UV/vis absorption, UV/vis CD, and electron paramagnetic resonance (EPR) spectroscopies (FeIII site). These studies suggest that N694C has a lowered E degrees of the FeII/FeIII couple and a raised pKa of water bound to the ferric site relative to wild type soybean lipoxygenase-1 (WT sLO-1) which would favor the organoiron mechanism. However, the observation in N694C of a significant deuterium isotope effect, anaerobic reduction of iron by substrate, and a substantial decrease in k(cat) (approximately 3000-fold) support H-atom abstraction as the relevant substrate-activation mechanism in sLO-1.     

Characterization of the structure and reactivity of monocopper-oxygen complexes supported by beta-diketiminate and anilido-imine ligands

Copper-oxygen complexes supported by beta-diketiminate and anilido-imine ligands have recently been reported (Aboelella et al., J Am Chem Soc 2004, 126, 16896; Reynolds et al., Inorg Chem 2005, 44, 6989) as potential biomimetic models for dopamine beta-monooxygenase (DbetaM) and peptidylglycine alpha-hydroxylating monooxygenase (PHM). However, in contrast to the enzymatic systems, these complexes fail to exhibit C--H hydroxylation activity (Reynolds et al., Chem Commun 2005, 2014). Quantum chemical characterization of the 1:1 Cu-O(2) model adducts and related species (Cu(III)-hydroperoxide, Cu(III)-oxo, and Cu(III)-hydroxide) indicates that the 1:1 Cu-O(2) adducts are unreactive toward substrates because of the weakness of the O--H bond that would be formed upon hydrogen-atom abstraction. This in turn is ascribed to the 1:1 adducts having both low reduction potentials and basicities. Cu(III)-oxo species on the other hand, determined to be intermediate between Cu(III)-oxo and Cu(II)-oxyl in character, are shown to be far more reactive toward substrates. Based on these results, design strategies for new DbetaM and PHM biomimetic ligands are proposed: new ligands should be made less electron rich so as to favor end-on dioxygen coordination in the 1:1 Cu-O(2) adducts. Comparison of the relative reactivities of the various copper-oxygen complexes as hydroxylating agents provides support for a Cu(II)-superoxide species as the intermediate responsible for substrate hydroxylation in DbetaM and PHM, and suggests that a Cu(III)-oxo intermediate would be competent in this process as well.     

Identification of a copper(I) intermediate in the conversion of 1-aminocyclopropane carboxylic acid (ACC) into ethylene by Cu(II)-ACC complexes and hydrogen peroxide

Several Cu(II) complexes with ACC (=1-aminocyclopropane carboxylic acid) or AIB (=aminoisobutyric acid) were prepared using 2,2'-bipyridine, 1,10-phenanthroline, and 2-picolylamine ligands: [Cu(2,2'-bipyridine)(ACC)(H2O)](ClO4) (1a), [Cu(1,10-phenanthroline)(ACC)](ClO4) (2a), [Cu(2-picolylamine)(ACC)](ClO4) (3a), and [Cu(2,2'-bipyridine)(AIB)(H2O)](ClO4) (1b). All of the complexes were characterized by X-ray diffraction analysis. The Cu(II)-ACC complexes are able to convert the bound ACC moiety into ethylene in the presence of hydrogen peroxide, in an "ACC-oxidase-like" activity. A few equivalents of base are necessary to deprotonate H2O2 for optimum activity. The presence of dioxygen lowers the yield of ACC conversion into ethylene by the copper(II) complexes. During the course of the reaction of Cu(II)-ACC complexes with H2O2, brown species (EPR silent and lambda max approximately 435 nm) were detected and characterized as being the Cu(I)-ACC complexes that are obtained upon reduction of the corresponding Cu(II) complexes by the deprotonated form of hydrogen peroxide. The geometry of the Cu(I) species was optimized by DFT calculations that reveal a change from square-planar to tetrahedral geometry upon reduction of the copper ion, in accordance with the observed nonreversibility of the redox process. In situ prepared Cu(I)-ACC complexes were also reacted with hydrogen peroxide, and a high level of ethylene formation was obtained. We propose Cu(I)-OOH as a possible active species for the conversion of ACC into ethylene, the structure of which was examined by DFT calculation.     

Spectroscopy and bonding in side-on and end-on Cu2(S2) cores: comparison to peroxide analogues

Spectroscopic methods combined with density functional calculations were used to study the disulfide-Cu(II) bonding interactions in the side-on micro -eta(2):eta(2)-bridged Cu(2)(S(2)) complex, [[Cu(II)[HB(3,5-Pr(i)(2)pz)(3)]](2)(S(2))], and the end-on trans- micro -1,2-bridged Cu(2)(S(2)) complex, [[Cu(II)(TMPA)](2)(S(2))](2+), in correlation to their peroxide structural analogues. Resonance Raman shows weaker S-S bonds and stronger Cu-S bonds in the disulfide complexes relative to the O-O and Cu-O bonds in the peroxide analogues. The weaker S-S bonds come from the more limited interaction between the S 3p orbitals relative to that of the O 2s/p hybrid orbitals. The stronger Cu-S bonds result from the more covalent Cu-disulfide interactions relative to the Cu-peroxide interactions. This is consistent with the higher energy of the disulfide valence level relative to that of the peroxide. The ground states of the side-on Cu(2)(S(2))/Cu(2)(O(2)) complexes are more covalent than those of the end-on Cu(2)(S(2))/Cu(2)(O(2)) complexes. This derives from the larger sigma-donor interactions in the side-on micro -eta(2):eta(2) structure, which has four Cu-disulfide/peroxide bonds, relative to the end-on trans- micro -1,2 structure, which forms two bonds to the Cu. The larger disulfide/peroxide sigma-donor interactions in the side-on complexes are reflected in their more intense higher energy disulfide/peroxide to Cu charge transfer transitions in the absorption spectra. The large ground-state covalencies of the side-on complexes result in significant nuclear distortions in the ligand-to-metal charge transfer excited states, which give rise to the strong resonance Raman enhancements of the metal-ligand and intraligand vibrations. Particularly, the large covalency of the Cu-disulfide interaction in the side-on Cu(2)(S(2)) complex leads to a different rR enhancement profile, relative to the peroxide analogues, reflecting a S-S bond distortion in the opposite directions in the disulfide/peroxide pi(sigma) to Cu charge transfer excited states. A ligand sigma back-bonding interaction exists only in the side-on complexes, and there is more sigma mixing in the side-on Cu(2)(S(2)) complex than in the side-on Cu(2)(O(2)) complex. This sigma back-bonding is shown to significantly weaken the S-S/O-O bond relative to that of the analogous end-on complex, leading to the low nu(S)(-)(S)/nu(O)(-)(O) vibrational frequencies observed in the resonance Raman spectra of the side-on complexes.     

Resonance raman investigation of equatorial ligand donor effects on the Cu(2)O(2)(2+) core in end-on and side-on mu-peroxo-dicopper(II) and bis-mu-oxo-dicopper(III) complexes

The effect of endogenous donor strength on Cu(2)O(2) bonds was studied by electronically perturbing [[(R-TMPA)Cu(II)]](2)(O(2))](2+) and [[(R-MePY2)Cu](2)(O(2))](2+) (R = H, MeO, Me(2)N), which form the end-on mu-1,2 bound peroxide and an equilibrium mixture of side-on peroxo-dicopper(II) and bis-mu-oxo-dicopper(III) isomers, respectively. For [[(R-TMPA)Cu(II)](2)(O(2))](2+), nu(O-O) shifts from 827 to 822 to 812 cm(-1) and nu(Cu)(-)(O(sym)) shifts from 561 to 557 to 551 cm(-1), respectively, as R- varies from H to MeO to Me(2)N. Thus, increasing the N-donor strength to the copper decreases peroxide pi(sigma) donation to the copper, weakening the Cu-O and O-O bonds. A decrease in nu(Cu-O) of the bis-mu-oxo-dicopper(III) complex was also observed with increasing N-donor strength for the R-MePY2 ligand system. However, no change was observed for nu(O-O) of the side-on peroxo. This is attributed to a reduced charge donation from the peroxide pi(sigma) orbital with increased N-donor strength, which increases the negative charge on the peroxide and adversely affects the back-bonding from the Cu to the peroxide sigma orbital. However, an increase in the bis-mu-oxo-dicopper(III) isomer relative to side-on peroxo-dicopper(II) species is observed for R-MePY2 with R = H < MeO < Me(2)N. This effect is attributed to the thermodynamic stabilization of the bis-mu-oxo-dicopper(III) isomer relative to the side-on peroxo-dicopper(II) isomer by strong donor ligands. Thus, the side-on peroxo-dicopper(II)/bis-mu-oxo-dicopper(III) equilibrium can be controlled by electronic as well as steric effects.     

The oxidative properties of a manganese(IV) hydroperoxide moiety and its relationships with the corresponding manganese(IV) oxo and hydroxo moieties

Clear elucidation of the oxidative relationships of the active metal hydroperoxide moiety with its corresponding metal oxo and hydroxo intermediates would help the understanding of the different roles they may play in redox metalloenzymes and oxidation chemistry. Using an Mn(Me(2)EBC)Cl(2) complex, it was found that, in t-butanol-water (4 : 1) with excess H(2)O(2) at pH 1.5, the Mn(IV)-OOH moiety may exist in the catalytic solution with a mass signal of m/z = 358.1, which provides a particular chance to investigate its oxidative properties. In catalytic oxidations, the Mn(IV)-OOH moiety demonstrates a relatively poor activity in hydrogen abstraction from diphenyl methane and ethylbenzene with TOF of only 1.2 h(-1) and 1.1 h(-1) at 50 °C, whereas it can efficiently oxygenate diphenyl sulfide, methyl phenyl sulfide and benzyl phenyl sulfide with TOF of 13.8 h(-1), 15.4 h(-1) and 17.8 h(-1), respectively. In mechanistic studies using H(2)(18)O and H(2)(18)O(2), it was found that, in the Mn(IV)-OOH moiety mediated hydrogen abstraction and sulfide oxygenations, the reaction proceeds by two parallel pathways: one by direct oxygen insertion/transfer, and the other by plausible electron transfer. Together with a good understanding of the corresponding manganese(IV) oxo and hydroxo intermediates, this work provides the first chance to compare the reactivity differences and similarities of the active metal oxo, hydroxo and hydroperoxide intermediates. The available evidence reveals that the Mn(IV)-OOH moiety has a much more powerful oxidizing capability than the corresponding Mn(IV)=O and Mn(IV)-OH functional groups in both hydrogen abstraction and oxygenation.