PS/PMMA mixed polymer brushes on the surface of clay layers: Preparation and application in polymer blends

Polystyrene (PS) and poly(methyl methacrylate) (PMMA) mixed polymer brushes on the surface of clay layers were prepared by using in situ free radical polymerization. Free radical initiator molecules with two quaternary ammonium groups at both ends were intercalated into the interlayer spacing of clay layers. The amount of polymer brushes grafted on the surface of clay layers can be controlled by controlling the polymerization time. Thermogravimetric analysis, X‐ray diffraction, and high‐resolution transmission electron microscope results indicated successful preparation of the mixed polymer brushes on the surface of clay layers. The kinetics of the grafting of the monomers was also studied. The mixed polymer brushes on the surface of clay layers were used as compatibilizers in blends of PS and PMMA. In the blends, the intercalated clay particles tend to locate at the interface of two phases reducing the interfacial tension. In the meanwhile, PMMA homopolymer chains tend to intercalate into clay layers. The driving force for the intercalation is the compatibility between homo‐PMMA chains and PMMA brushes on the surface of clay layers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5329–5338, 2007     

Characterization of patterned poly(methyl methacrylate) brushes under various structures upon solvent immersion

In this paper we describe a graft polymerization/solvent immersion method for generating various patterns of polymer brushes. We used a very-large-scale integration (VLSI) process and oxygen plasma system to generate well-defined patterns of polymerized methyl methacrylate (MMA) on patterned Si(1 0 0) surfaces through atom transfer radical polymerization (ATRP). After immersion of wafers presenting lines of these PMMA brushes in water and tetrahydrofuran, we observed mushroom- and brush-like regimes through grafting densities and surface coverages, respectively, for the PMMA brushes with various pattern resolutions. In the mushroom-like regime, the distance between lines of PMMA brushes was smaller than that of the lines patterned lithographically on the wafer; in the brush-like regime, this distance was approximately the same. This new strategy allows polymer brushes to be prepared through graft polymerization and then have their patterns varied through solvent immersion.     

Facile surface immobilization of ATRP initiators on colloidal polymers for grafting brushes and application to colloidal crystals

Bromo-initiators for atom transfer radical polymerization (ATRP) were successfully immobilized on the surfaces of cross-linked poly(methyl methacrylate) (PMMA) spheres by soap-free emulsion polymerization using CBr(4) as the chain transfer agent. Subsequent surface-initiated ATRP (SI-ATRP) afforded a layer of PMMA brushes covalently attached to the sphere surfaces. Colloidal crystal films of these monodisperse spheres were then studied to identify the relationship between variation in particle diameter and the optical properties. The particle diameters were controlled by varying the feed monomer proportions in soap-free emulsion polymerization and the thickness of the grafted brush layer. It was found that the particle diameter could successfully be controlled to obtain crystal films that produce a variety of brilliant colors in the visible region. The results of this study can provide useful information for facile preparation of surface-immobilized ATRP initiators on colloidal polymers and can be employed for grafting polymer brushes.     

In-situ polymerization at the interfaces of micelles: a "grafting from" method to prepare micelles with mixed coronal chains

Herein we describe a new strategy for producing micelles with mixed coronal chains. This method involves attachment of an atom transfer radical polymerization (ATRP) initiator at the interface of a micelle and preparation of poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) brushes at the interface by a "grafting from" method. Poly(ethylene glycol)- block-polystyrene (PEG- b-PS) diblock copolymer was achieved by ATRP. After the sulfonation reaction PS blocks were partly sulfonated. In aqueous solution at low pH the sulfonated block copolymer self-assembled into micelles with PS cores and PEG coronae and sodium 4-styrenesulfonate groups were distributed at the interfaces of the micelles. An ATRP initiator consisting of a quaternary ammonium salt moiety and a 2-bromo-2-methyl propionate moiety was ion exchanged onto the interface of the micelle. ATRP of DMAEMA was initiated at the interface, and micelles with PEG/PDMAEMA mixed coronal chains were prepared by ATRP. The structures of the micelles were characterized by dynamic light scattering (DLS), transmission electron microscopy (TEM), and zeta potential measurements. The size and morphology of the micelles were controlled by pH in aqueous solution. At high pH, PDMAEMA brushes collapse, forming nanodomains on the surface of the micelles. PDMAEMA brushes in the coronae of the micelles could be used as a template for preparation of gold nanoparticles.     

结构规整的高密度两亲性接枝聚合物刷的合成及其自组装研究

大分子单体通过两种可控聚合方法, 即开环易位聚合(ROMP)和原子转移自由基聚合(ATRP)的联用, 合成一种新型两亲性接枝聚合物刷. 具有高环张力的降冰片烯单侧链大分子单体norbornene-graft-poly(ε-caprolactone)/Br (PCL- NBE-Br)首先进行ROMP反应, 生成聚合物主链, 每个单体单元上含有一条PCL链和一个溴官能团; 然后用含溴的ROMP聚合物poly(norbornene)-graft-poly(ε-caprolactone)/Br (PCL-PNBE-Br)作为大分子引发剂引发单体2-(dimethyl- amino)ethyl methacrylate)的ATRP反应, 生成结构明确的高密度两亲性接枝聚合物刷poly(norbornene)-graft-poly(ε- caprolactone)/poly(2-(dimethylamino)ethyl methacrylate) (PCL-PNBE-PDMAEMA), 其主链每个单体单元上均含有一条疏水性PCL接枝链和一条亲水性PDMAEMA接枝链. 最后, 研究此类高密度两亲性接枝聚合物刷的自组装行为, 用动态激光光散射(DLS)研究其在混合溶剂(THF/H2O)中的胶束行为, 考察胶束溶液的浓度以及不同长度的亲水性接枝链对胶束尺寸的影响; 利用透射电镜(TEM)观察胶束为球形, 具有类似线团或草莓状的形态.     

Corrosion protection of iron surface modified by poly(methyl methacrylate) using surface-initiated atom transfer radical polymerization (SI-ATRP)

A new N-heterocyclic initiator N-[2-(8-heptadecenyl)-4,5-dihydro-1H-imidazole-1-ethyl]-2-bromoisobutyramide was synthesized and immobilized on the surface of iron. Methyl methacrylate was grafted from iron substrates via surface-initiated atom transfer radical polymerization (ATRP). The first-order kinetics of poly(methyl methacrylate) (PMMA) grafting from iron revealed the control of ATRP throughout the reaction, and the polymerization reached a high conversion producing polymers with good control of molecular weights (M _n?=?68,800) and low polydispersity indexes (M _w/M _n?<?1.32). The thickness of the polymer brush films was greater than 47 nm after 7 h of reaction time. The grafting density was estimated to be 0.48 chains?nm^?2. The iron surfaces at various stages of modification were characterized by scanning electron microscopy and energy dispersive spectrometer. The analytical results were consistent with a thin compact polymer coating on the surface of iron. Iron surface with grafted PMMA coating showed significant corrosion resistance. This work demonstrated that the surface-initiated ATRP is a versatile means of the surface modification of active metals with well-defined and functionalized polymer brushes.     

Synthesis of well‐defined polymer brushes on the surface of zinc antimonate nanoparticles through surface‐initiated atom transfer radical polymerization

Zinc antimonate nanoparticles consisting of antimony and zinc oxide were surface modified in a methanol solvent medium using triethoxysilane‐based atom transfer radical polymerization (ATRP) initiating group (i.e.,) 6‐(2‐bromo‐2‐methyl) propionyloxy hexyl triethoxysilane. Successful grafting of ATRP initiator on the surface of nanoparticles was confirmed by thermogravimetric analysis that shows a significant weight loss at around 250–410 °C. Grafting of ATRP initiator onto the surface was further corroborated using Fourier transform Infrared spectroscopy (FT‐IR) and X‐ray photoelectron spectroscopy (XPS). The surface‐initiated ATRP of methyl methacrylate (MMA) mediated by a copper complex was carried out with the initiator‐fixed zinc antimonate nanoparticles in the presence of a sacrificial (free) initiator. The polymerization was preceded in a living manner in all examined cases; producing nanoparticles coated with well defined poly(methyl methacrylate) (PMMA) brushes with molecular weight in the range of 35–48K. Furthermore, PMMA‐grafted zinc antimonate nanoparticles were characterized using Thermogravimetric analysis (TGA) that exhibit significant weight loss in the temperature range of 300–410 °C confirming the formation of polymer brushes on the surface with the graft density as high as 0.26–0.27 chains/nm². The improvement in the dispersibility of PMMA‐grafted zinc antimonate nanoparticles was verified using ultraviolet‐visible spectroscopy and transmission electron microscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Novel approach for metallic surface-initiated atom transfer radical polymerization using electrografted initiators based on aryl diazonium salts

This paper reports on the preparation of poly(methyl methacrylate) (PMMA), poly(n-butyl acrylate) (PBA), and polystyrene (PS) brushes at the surface of conducting materials that were modified by the electrochemical reduction of a brominated aryl diazonium salt BF4-, +N2-C6H4-CH(CH3)-Br (D1). The grafted organic species -C6H4-CH(CH3)-Br was found to be very effective in initiating atom transfer radical polymerization (ATRP) of vinyl monomers. This novel approach combining diazonium salts and ATRP allowed PMMA, PBA, and PS brushes to be grown from the surface of iron electrodes. The polymer films were characterized in terms of their chemical structure by infrared reflection absorption spectroscopy and X-ray photoelectron spectroscopy. Atomic force microscopy studies indicated that the polymer brushes are densely packed. Contact angle measurements of water drops on PS and PMMA brushes were 88.1 +/- 2.0 and 70.3 +/- 2.1 degrees, respectively, which is consistent with the published wettability data for the corresponding polymer sheets.     

A controlled approach to iron oxide nanoparticles functionalization for magnetic polymer brushes

In this article, we report a detailed study of surface modification of magnetite nanoparticles by means of three different grafting agents, functional for the preparation of magnetic polymer brushes. 3-Aminopropyltriethoxysilane (APTES), 3-chloropropyltriethoxysilane (CPTES), and 2-(4-chlorosulfonylphenyl)ethyltrichlorosilane (CTCS) were chosen as grafting models through which a wide range of polymer brushes can be obtained. By means of accurate thermogravimetric analysis a good control over the amount of immobilized molecules is achieved, and optimal operating conditions for each grafting agent are consequently determined. Graft densities ranging from approximately 4 to 7 molecules per nm(2) are obtained, depending on the conditions used. In addition, the surface-initiated atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) carried out with CTCS-coated nanoparticles is presented as an example of polymer brushes, leading to a well-defined and dense polymeric coating of around 0.6 PMMA chains per nm(2).     

Grafting acrylic polymers from flat nickel and copper surfaces by surface-initiated atom transfer radical polymerization

Acrylic polymers, including poly(methyl methacrylate), poly(2,2,2-trifluoroethyl methacrylate), poly( N,N'-dimethyaminoethyl methacrylate), and poly(2-hydroxyethyl methacrylate) were grafted from flat nickel and copper surfaces through surface-initiated atom transfer radical polymerization (ATRP). For the nickel system, there was a linear relationship between polymer layer thickness and monomer conversion or molecular weight of "free" polymers. The thickness of the polymer brush films was greater than 80 nm after 6 h of reaction time. The grafting density was estimated to be 0.40 chains/nm2. The "living" chain ends of grafted polymers were still active and initiated the growth of a second block of polymer. Block copolymer brushes with different block sequences were successfully prepared. The experimental surface chemical compositions as measured by X-ray photoelectron spectroscopy agreed very well with their theoretical values. Water contact angle measurements further confirmed the successful grafting of polymers from nickel and copper surfaces. The surface morphologies of all samples were studied by atomic force microscopy. This study provided a novel approach to prepare stable functional polymer coatings on reactive metal surfaces.     

Nanoscale phase separation in mixed poly(tert-butyl acrylate)/polystyrene brushes on silica nanoparticles under equilibrium melt conditions

This communication reports on the study of microphase separation of well-defined mixed poly(tert-butyl acrylate) (PtBA)/polystyrene (PS) brushes on silica nanoparticles under equilibrium melt conditions. Mixed PtBA/PS brushes were synthesized from an asymmetric, difunctional initiator-terminated self-assembled monolayer by combining atom transfer radical polymerization and nitroxide-mediated radical polymerization. Two symmetric PtBA/PS mixed brush samples with different molecular weights were used in this study and were thermally annealed in vacuum at 150 degrees C. For the mixed brushes with number average molecular weights (Mn) of 24 200 g/mol for PtBA and 23 000 g/mol for PS, two glass transitions were observed in the differential scanning calorimetry analysis. Transmission electron microscopy study showed that the two grafted polymers underwent a lateral microphase separation, forming a random worm-like pattern with a feature size of approximately 10 nm on the silica particle surfaces. In contrast, the mixed brushes with a Mn of 10,400 g/mol for PtBA and 11,900 g/mol for PS did not microphase separate. Although the mixed brushes are on curved substrates, this work provides results consistent with the theoretical prediction that symmetric mixed homopolymer brushes undergo lateral rather than vertical phase separation under equilibrium melt conditions.     

Synthesis and properties of polymer brushes composed of poly(diphenylacetylene) main chain and poly(ethylene glycol) side chains

Novel cylindrical polymer brushes consisting of poly(diphenylacetylene) main chain and poly(poly(ethylene glycol) methyl ether monomethacrylate) (PPEGMA) side chains were synthesized by the diphenylacetylene macromonomer or side chain initiated atom transfer radical polymerization (ATRP) of poly(ethylene glycol) methyl ether monomethacrylate (PEGMA) from an bromo isobutyryl-bearing poly(diphenylacetylene) (poly(BrDPA)) method. The diphenylacetylene macromonomer, namely, DPA-PPEGMA, were prepared by the ATRP of PEGMA from bromo isobutyryl-bearing diphenylacetylene. DPA-PPEGMA was polymerized successfully with WCl₆-Ph₄Sn catalyst to give high molecular weight polymer brushes poly(DPA-PPEGMA). Meanwhile, polymer brushes (PDPA-g-PPEGMA) were obtained by ATRP of PEGMA from poly(BrDPA). The molecular weight of the side chains of PPEGMA could be controlled simply by modulating the ATRP time. The macromonomer and polymer brushes are soluble in nonpolar solvents such as toluene and chloroform. The polymers of poly(BrDPA) and poly(DPA-PPEGMA) absorb in the longer wavelength region, with two peaks at around 370 and 414 nm. The polymers are thermally stable and exhibit double crystallization and melting peaks during the cooling and heating scans.     

Length scale heterogeneity in lateral gradients of poly(N-isopropylacrylamide) polymer brushes prepared by surface-initiated atom transfer radical polymerization coupled with in-plane electrochemical potential gradients

We report the preparation and characterization of poly(N-isopropylacrylamide) (PNIPAAm) polymer brushes exhibiting controlled lateral variations in the patchiness of polymer chains. These gradients were achieved through an atom transfer radical polymerization (ATRP) grafting-from approach utilizing surfaces on which the spatial profile of the initiator density was carefully controlled. Initiator density gradients were formed on Au by first preparing a hexadecanethiol (HDT) density gradient, by reductive desorption using a laterally anisotropic electrochemical gradient. The bare areas in the original HDT gradient were then back-filled with a disulfide initiator, (BrC(CH3)2COO(CH2)11S)2. The initiator coverage was characterized by X-ray photoelectron spectroscopy (XPS). Then, surface-initiated ATRP was utilized to transfer the initiator density gradient into gradients of PNIPAAm chain density. Ellipsometry, surface plasmon resonance (SPR), and atomic force microscopy (AFM) were used to characterize these PNIPAAm density gradients. The defining characteristic of the PNIPAAm gradients is the evolution of the morphology from discontinuous mushroom structures at extremely low grafting densities to heterogeneous patchy structures at intermediate grafting densities. The size of the patchy domains gradually increases, until at a high grafting density region, the morphology evolves to a smoother, presumably more extended, structure.     

Grafting from surfaces for "everyone": ARGET ATRP in the presence of air

Atom-transfer radical polymerization (ATRP) is one of the controlled/living radical polymerizations yielding well-defined (co)polymers, nanocomposites, molecular hybrids, and bioconjugates. ATRP, as in any radical process, has to be carried out in rigorously deoxygenated systems to prevent trapping of propagating radicals by oxygen. Herein, we report that ATRP can be performed in the presence of limited amount of air and with a very small (typically ppm) amount of copper catalyst together with an appropriate reducing agent. This technique has been successfully applied to the preparation of densely grafted polymer brushes, poly(n-butyl acrylate) homopolymer, and poly(n-butyl acrylate)-block-polystyrene copolymer from silicon wafers (0.4 chains/nm2). This simple new method of grafting well-defined polymers does not require any special equipment and can be carried out in vials or jars without deoxygenation. The grafting for "everyone" technique is especially useful for wafers and other large objects and may be also applied for molecular hybrids and bioconjugates.     

Surface‐initiated atom transfer radical polymerization grafting of poly(2,2,2‐trifluoroethyl methacrylate) from flat silicon wafer surfaces

Poly(2,2,2‐trifluoroethyl methacrylate) (PTFEMA), a partially fluorinated polymer, was directly grafted from silicon wafer surfaces by a surface‐initiated atom‐transfer radical polymerization (ATRP). The polymer layer thickness increased linearly with monomer conversion and molecular weight of free polymers in solution. The thickness was mainly determined by the experimental conditions such as activator/deactivator ratio, monomer/catalyst ratio, and monomer concentration. PTFEMA layers of more than 100‐nm thick were obtained. The grafted PTFEMA chains were “living” and allowed the extension of a second block of PMMA. X‐ray photoelectron spectroscopy study showed that the chemical compositions at the surfaces agreed well with their theoretical values. A novel surface‐attachable difunctional initiator was also synthesized and applied to the grafting of PTFEMA. The grafting density was doubled using this difunctional initiator, from 0.48 to 0.86 chains/nm². © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1252–1262, 2006     

To patterned binary polymer brushes via capillary force lithography and surface-initiated polymerization

An effective approach is described for the synthesis of binary patterned polymer brushes using a combination of capillary force lithography and surface-initiated polymerization. First, the approach calls for an ultrathin polystyrene (PS) mask to be deposited, in a pattern, over a surface to which a layer of polymerization initiator has already been anchored. Next, surface-initiated atom transfer radical polymerization (ATRP) is performed. This can graft the initial polymer brush onto those areas of the surface unprotected by the PS mask. After grafting is complete, the PS mask is removed and a second brush is synthesized on the newly exposed areas.     

Polymer brushes grafted to "passivated" silicon substrates using click chemistry

We present herein a versatile method for grafting polymer brushes to passivated silicon surfaces based on the Cu(I)-catalyzed Huisgen 1,3-dipolar cycloaddition (click chemistry) of omega-azido polymers and alkynyl-functionalized silicon substrates. First, the "passivation" of the silicon substrates toward polymer adsorption was performed by the deposition of an alkyne functionalized self-assembled monolayer (SAM). Then, three tailor-made omega-azido linear brush precursors, i.e., PEG-N3, PMMA-N3, and PS-N3 (Mn approximately 20,000 g/mol), were grafted to alkyne-functionalized SAMs via click chemistry in tetrahydrofuran. The SAM, PEG, PMMA, and PS layers were characterized by ellipsometry, scanning probe microscopy, and water contact angle measurements. Results have shown that the grafting process follows the scaling laws developed for polymer brushes, with a significant dependence over the weight fraction of polymer in the grafting solution and the grafting time. The chemical nature of the brushes has only a weak influence on the click chemistry grafting reaction and morphologies observed, yielding polymer brushes with thickness of ca. 6 nm and grafting densities of ca. 0.2 chains/nm2. The examples developed herein have shown that this highly versatile and tunable approach can be extended to the grafting of a wide range of polymer (pseudo-) brushes to silicon substrates without changing the tethering strategy.     

Synthesis and characterization of surface-grafted polyacrylamide brushes and their inhibition of microbial adhesion

A method is presented to prevent microbial adhesion to solid surfaces exploiting the unique properties of polymer brushes. Polyacrylamide (PAAm) brushes were grown from silicon wafers by atom transfer radical polymerization (ATRP) using a three-step reaction procedure consisting of immobilization of a coupling agent gamma-aminopropyltriethoxysilane, anchoring of an ATRP initiator 4-(chloromethyl)benzoyl chloride, and controlled radical polymerization of acrylamide. The surfaces were characterized by X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, ellipsometry, and contact-angle measurements. The calculated grafting density pointed to the presence of a dense and homogeneous polymer brush. Initial deposition rates, adhesion after 4 h, and detachment of two bacterial strains (Staphylococcus aureus ATCC 12600 and Streptococcus salivarius GB 24/9) and one yeast strain (Candida albicans GB 1/2) to both PAAm-coated and untreated silicon surfaces were investigated in a parallel plate flow chamber. A high reduction (70-92%) in microbial adhesion to the surface-grafted PAAm brush was observed, as compared with untreated silicon surfaces. Application of the proposed grafting method to silicone rubbers may offer great potential to prevent biomaterials-centered infection of implants.     

两亲性杂侧链聚合物刷的合成及其乳化功能

报道了一种随机高密度接枝亲水、疏水聚合物侧链的刷形两亲性聚合物.首先,结合可逆加成-断裂链转移(RAFT)聚合和后修饰方法,得到含叠氮侧基的聚甲基丙烯酸缩水甘油酯(PGMA-N3)作为主链;再分别合成端炔基聚苯乙烯(PS)和端炔基聚环氧乙烷(PEO),然后通过铜催化的叠氮-炔环加成反应,将疏水性PS和亲水性PEO同时高效的接到PGMA主链上,制得两亲性杂侧链的聚合物刷.由凝胶渗透色谱(SEC)分析得知,在主链叠氮基团与两侧链总炔基的摩尔投料比为1∶1的条件下,PS和PEO的接枝效率很高,都大于90%.通过调节主链长度和2种侧链的投料比,获得不同组成的聚合物刷.通过等质量的甲苯/水混合体系,考察两亲性聚合物刷的乳化能力,发现主链聚合度为100,PS∶PEO比例为70∶30的聚合物刷表现出最佳的乳化性能.     

Site-specific dense immobilization of antibody fragments on polymer brushes supported by silicone nanofilaments

For site-specific dense immobilization of antibodies on a solid support, we prepared phosphorylcholine copolymer brushes on silicone nanofilaments. The nanofilaments were prepared on a silicon wafer by treatment with trichloromethylsilane (MeSiCl 3). To generate Si-OH groups on the nanofilaments, O 2 plasma was irradiated on the surface. Initiators for atom transfer radical polymerization (ATRP) were then coupled on the filaments. Phosphorylcholine copolymer brushes were prepared by a "grafting from" process, and pyridyl disulfide groups were introduced into the polymer chains. F(ab') fragments were then specifically immobilized onto these surfaces via a thiol-disulfide interchange reaction. The amount of antibodies immobilized on the nanofilament-supported copolymer brushes was approximately 65 times greater than that on smooth wafer-supported copolymer brushes.