Synthesis and retrostructural analysis of libraries of AB3 and constitutional isomeric AB2 phenylpropyl ether-based supramolecular dendrimers

We report the synthesis of methyl esters of 3-(4-hydroxyphenyl)propionic, 3-(3,4-dihydroxyphenyl)propionic, 3-(3,5-dihydroxyphenyl)propionic, and 3-(3,4,5-trihydroxyphenyl)propionic acids and their use in a convergent iterative strategy to prepare up to four generations of three libraries, one of 3,4,5- and two of constitutional isomeric 3,4- and 3,5-substituted 3-phenylpropyl dendrons. Each library contains 3-[3,4,5-tris(dodecyl-1-oxy)phenyl]propyl-, 3-[3,4-bis(dodecyl-1-oxy)phenyl]propyl-, 3-{3,4-bis[3-(4-dodecyl-1-oxyphenyl)propyl-1-oxy]phenyl}propyl-, and 3-{3,4,5-tris[3-(4-dodecyl-1-oxyphenyl)propyl-1-oxy]phenyl}propyl ether first-generation dendrons on their periphery and -CO2CH3, -COOH, and -CH2OH groups at their apex. Regardless of their generation number and their periphery, internal, and apex structures, these dendrons self-assemble into supramolecular dendrimers that self-organize into all periodic and quasi-periodic assemblies encountered previously and in several unencountered with architecturally related benzyl ether-based supramolecular dendrimers. A variety of porous columnar lattices that were previously obtained only from dendritic dipeptides and hollow supramolecular spheres were also discovered from these building blocks. The more flexible and less compact 3-phenylpropyl ether repeat units are stable under acidic conditions, facilitate a simpler synthetic strategy, provide faster dynamics of self-assembly into higher-order supramolecular structures of larger dimensions, exhibit lower transition temperatures than the corresponding benzyl ether homologues, and demonstrate the generality of the self-assembly concept based on amphiphilic dendrons.     

Two neolignan glucosides and antihistamine release activities from Bidens parviflora WILLD

Two new neolignan glucosides, bidenlignasides A (1) and B (2), were isolated from the whole plant of Bidens parviflora WILLD. The structures of the two new compounds 1 and 2 established to be 3-hydroxy-1-(4-hydroxy-3-methoxyphenyl)-3-[5E-(3-hydroxypropenyl)-3-methoxy-2-O-beta-D-glucosyl)phenyl] propan-1-one and 3-{3-[1,3-dihydroxy-3-(4-hydroxy-3-methoxyphenyl)propyl]-4-hydroxy-5-methoxyphenyl}-allyl-O-beta-D-glucuside, respectively, on the basis of spectral and chemical evidence. Compounds 1 and 2 were found to inhibit histamine release from peritoneal exudate mast cells induced by antigen-antibody reaction.     

Synthesis and some transformations of methyl [4-(oxoacetyl)phenyl]carbamate

The oxidation of methyl (4-acetylphenyl)carbamate with selenium dioxide in dioxane–water (30: 1) gave methyl [4-(oxoacetyl)phenyl]carbamate whose condensation with ethyl acetoacetate or diethyl malonate and hydrazine hydrate afforded ethyl 3-methyl-6-[4-(methoxycarbonylamino)phenyl]pyridazine-4-carboxylate and methyl {4-[5-(hydrazinecarbonyl)-6-oxo-1,6-dihydropyridazin-3-yl]phenyl}carbamate, respectively. The reaction of methyl [4-(oxoacetyl)phenyl]carbamate with o-phenylenediamine in dimethylformamide–ethanol on heating led to the formation of methyl [4-(quinoxalin-2-yl)phenyl]carbamate. Methyl {4-(5,7-dioxo- 4,4a,5,6,7,8-hexahydropyrimido[4,5-c]pyridazin-3-yl)phenyl}carbamate and methyl {4-(5-oxo-7-sulfanylidene- 4,4a,5,6,7,8-hexahydropyrimido[4,5-c]pyridazin-3-yl)phenyl}carbamate were synthesized by reactions of methyl [4-(oxoacetyl)phenyl]carbamate with barbituric and thiobarbituric acids, respectively, and hydrazine hydrate in the presence of zirconyl chloride octahydrate at room temperature.     

Synthesis of new functionally substituted hetarylcarbamates from methyl {4-[(2<Emphasis Type="Italic">E</Emphasis>)-3-(4-methoxyphenyl)-prop-2-enoyl]phenyl}carbamate

Three-component condensation of methyl {4-[(2E)-3-(4-methoxyphenyl)prop-2-enoyl]phenyl}- carbamate with ninhydrin and L-proline in methanol–water (10: 1) afforded methyl {4-[1,3-dioxo-1′- (4-methoxyphenyl)-1,1′,2′,3,5′,6′,7′,7a′-octahydrospiro[indene-2,3′-pyrrolizin]-2′-ylcarbonyl]phenyl}carbamate. Heating of methyl {4-[(2E)-3-(4-methoxyphenyl)prop-2-enoyl]phenyl}carbamate with isatin and benzylamine in methanol gave methyl {4-[4′-(4-methoxyphenyl)-2-oxo-5′-phenyl-1,2-dihydrospiro[indole-3,2′-pyrrolidin]-3′-ylcarbonyl]phenyl}carbamate. The condensation of methyl {4-[(2E)-3-(4-methoxyphenyl)prop-2- enoyl]phenyl}carbamate with sarcosine and 11H-indeno[1,2-b]quinoxalin-11-one generated in situ from ninhydrin and o-phenylenediamine in boiling ethanol led to the formation of methyl {4-[4′-(4-methoxyphenyl)-1′-methyl-11,11a-dihydro-5aH-spiro[benzo[b]phenazine-6,2′-pyrrolidin]-3′-ylcarbonyl]phenyl}carbamate.     

Synthesis and characterization of α-{ 3-[2-hydroxy-3- （N-methyl-N-hydroxy-ethylamino）propoxy]propyl}-ω- butylpolydimethylsiloxanes

α-{ 3-[2-hydroxy-3-（N-methyl-N-hydroxyethylamino）propoxy]propyl }-α-butylpolydimethylsiloxanes III with various molecu- lar weights were prepared by epoxy addition of α-[3-（2,3-epoxy-propoxy）propyl]-α-butylpolydimethylsiloxanes Ⅱ and N- methylmonoethanolamine. At each step, the outcome compounds were characterized through FT-IR and NMR spectra, the results showed that each step was successfully carried out and objective products were achieved.     

Reactions of 5-[3-(trifluoromethyl)-phenyl]furan-2-carbaldehyde

The Knoevenagel condensations of 5-[3-(trifluoromethyl)phenyl]furan-2-carbaldehyde with seven compounds containing an active methyl or methylene group have been studied. The compounds used were: methyl 2-cyanoacetate, malononitrile, 2-furylacetonitrile, acetophenone, 2-thioxo-1,3-thiazolidin-4-one (rhodanine), 5,5-dimethylcyclohexane-1,3-dione (dimedone), and methyl 2-azidoacetate. The effect of microwave irradiation on the condensation reactions was studied and compared with “’classical”’ conditions. Thermolysis of methyl 2-azido-3-{5-[3-(trifluoromethyl)phenyl]-2-furyl}propenoate afforded methyl 2-[3-(trifluoromethyl)phenyl)]-4H-furo[3,2-b]pyrrole-5-carboxylate. (2E)-3-{ 5-[3-(Trifluoromethyl)phenyl]-2-furyl}propenoic acid was converted to the corresponding azide, which was cyclized on heating into 2-[3-(trifluoromethyl)phenyl)]-4,5-dihydrofuro[3,2-c]pyridin-4-one. The latter after successive action of POCl₃ and NH₂NH₂-Pd/C gave 2-[3-(trifluoromethyl)-phenyl]furo[3,2-c]pyridine. Published in Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 825–831, June, 2006.     

Facile addition of methyl lithium to a 4-vinylpyridine system

The rapid addition of methyl lithium to the 4-vinylpyridine system present in 4-{2,6-dihydroxy-4-(3-methyl-2-octyl)phenyl}-2-methyl-4-(4-pyridyl)but-3-en-2-ol ( 2 ) is reported. The α and β-4-{2,6-dihydroxy-4-(3-methyl-2-octyl)phenyl}-2,3-dimethyl-4-(4-pyridyl)butan-2-ols 4 and 5 formed, are cyclised by heating with 5N hydrochloric acid to trans and cis-3,4-dihydro-5-hydroxy-7-(3-methyl-2-octyl)-4-(4-pyridyl)-2,2,3-trimethyl-2H-1-benzopyran 6 and 7 respectively.     

Synthesis of 2-{2-hydroxy-3-[2-(vinyloxy)ethoxy]propoxy}-benzaldehyde and Schiff bases derived therefrom

Base-catalyzed reaction of 2-hydroxybenzaldehyde with 2-{[2-(vinyloxy)ethoxy]methyl}oxirane gave 2-{2-hydroxy-3-[2-(vinyloxy)ethoxy]propoxy}benzaldehyde in 42% yield, and subsequent condensations of the product with thiosemicarbazide and primary aliphatic amines afforded the corresponding thiosemicarbazone (yield 86%) and 1-{2-[(alkylimino)methyl]phenoxy}-3-[2-(vinyloxy)ethoxy]propan-2-ols (74–81%).     

Synthesis of 3-pyrrol-3′-yloxindoles with a carbamate function

By the reaction of methyl {4(3)-[2-(2-oxo-1,2-dihydro-3H-indol-3-ylidene)acetyl]phenyl} carbamates with ethyl 3-aminocrotonate at boiling in the mixture toluene-anhydrous ethanol, 2: 1, ethyl 5-{3(4)-[(methoxycarbonyl)amino]phenyl}-2-methyl-4-(2-oxo-2,3-dihydro-1H-indol-3-yl)-1H-pyrrole-3-carboxylates were obtained. The condensation of methyl {3(4)-[2-(2-oxo-1,2-dihydro-3H-indol-3-ylidene)acetyl] phenyl}carbamates with ethyl acetoacetate in the presence of ammonium acetate and 20 mol% of 1-methyl-3-butylimidazolium chloride or 1-methyl-3-octylimidazolium tetrafluoroborate at boiling in anhydrous ethanol led to the formation of the corresponding 3-pyrrol-3′-yloxindoles with a carbamate function.     

Synthesis of condensed tetrahydroimidazo[1,2-a]quinazoline-1,5-dione derivatives

Heating of N-{2-[(R-amino)carbonyl]phenyl}prolinamides in triethyl orthoformate solution was found to give 6-R-5,6,6a,8,9,10,10a,11-octahydropyrrolo[1′,2′:3,4]imidazo[1,2-a]quinazoline-5,11-diones. Similar reaction of N-{2-[(R-amino)carbonyl]phenyl}thiazolidine-4-carboxamides afforded 6-R-5,6,6a,10,10a,11-hexahydrothiazolo[3′,4′:3,4]imidazo[1,2-a]quinazoline-5,11-diones. The relative configuration of C-6a and C-10a centres of the tetracyclic compounds obtained was assigned as trans on the basis of X-ray crystallographic study.     

Synthesis and electropolymerization studies of non-aggregated (4-{3-[3-(dimethylamino,diethylamino)phenoxy]propoxy}phenyl)propanoxy substituted silicon naphthalocyanines

In this study, 3-(4-{3-[3-(dimethylamino)phenoxy]propoxy}phenyl)propan-1-ol, 3-(4-{3-[3-(diethylamino)phenoxy]propoxy}phenyl)propan-1-ol and axially disubstituted silicon naphthalocyanines (SiNc) bearing electropolymerizable bis-[(4-{3-[3-(dimethylamino)phenoxy]propoxy}phenyl)propanoxy] and bis-[(4-{3-[3-(diethylamino)phenoxy]propoxy}phenyl)propanoxy] units were synthesized for the first time. Aggregation behavior of SiNcs was examined in different solvents and concentrations in DMSO. In all solvents and concentrations, SiNcs were non-aggregated. Also, electrochemical studies of SiNcs were investigated by cyclic and square wave voltammetry. While SiNcs gave only naphthalocyanine-based reduction process during the cathodic potential scans, they were electropolymerized on the working electrode during the anodic potential scan because of the oxidative electropolymerization of (4-{3-[3-(dimethylamino)phenoxy]propoxy}phenyl)propanoxy and (4-{3-[3-(diethylamino)phenoxy]propoxy}phenyl)propanoxy groups on the substituents of the complexes.     

Effect of side‐chain end groups on the optical,electrochemical, and photovoltaic properties of side‐chain conjugated polythiophenes

Three new side‐chain conjugated polythiophene derivatives, poly{3‐[2‐(3‐methoxy‐4‐octyloxy‐phenyl)‐vinyl]‐thiophene} (P3MOPVT), poly{3‐[2‐(3,5‐dimethoxy‐4‐octyloxy‐phenyl)‐vinyl]‐thiophene} (P3DMOPVT), and poly{3‐[2‐(3,4‐dioctyloxy‐phenyl)‐vinyl]‐thiophene} (P3DOPVT), were synthesized by Wittig‐Hornor reaction and GRIM method and compared with poly{3‐[2‐(4‐octyloxy‐phenyl)‐vinyl]‐thiophene} (P3OPVT) for investigating the effect of the end groups of the conjugated side‐chain on the properties of the polymers. Owing to the electron‐donating ability of methoxy groups, the visible absorption peaks of P3MOPVT and P3DMOPVT solutions and films become stronger and red‐shifted compared with P3OPVT. The electrochemical bandgaps of the four polymers are 2.15 eV for P3OPVT, 1.99 eV for P3MOPVT, 1.85 eV for P3DMOPVT, and 2.36 eV for P3DOPVT, respectively, which indicate that the electron‐donating ability of the methoxy end group on the conjugated side chain of P3MOPVT and P3DMOPVT and the large steric hindrance of the two octyloxy end groups on the conjugated side chain of P3DOPVT have obvious influence on the electrochemical properties of the side‐chain conjugated polythiophenes. Polymer solar cells were fabricated with a structure of ITO/PEDOT:PSS/Polymer:PCBM/LiF/Al. The best device, based on P3DMOPVT, shows a power conversion efficiency of 1.63% under the illumination of AM1.5, 80 mW/cm². © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4916–4922, 2006     

Rhenium tricarbonyl core complexes of thymidine and uridine derivatives

Thymidine and uridine were modified at the C2' and C5' ribose positions to form amine analogues of the nucleosides (1 and 4). Direct amination with NaBH(OAc)3 in DCE with the appropriate aldehydes yielded 1-{5-[(bis(pyridin-2-ylmethyl)amino)methyl]-4-hydroxytetrahydrofuran-2-yl}-5-methyl-1H-pyrimidine-2,4-dione (L1), 1-{5-[(bis(quinolin-2-ylmethyl)amino)methyl]-4-hydroxytetrahydrofuran-2-yl}-5-methyl-1H-pyrimidine-2,4-dione (L2), and 1-[3-(bis(pyridin-2-ylmethyl)amino)-4-hydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl]-1H-pyrimidine-2,4-dione (L5), while standard coupling procedures of 1 and 4 with 5-(bis(pyridin-2-ylmethyl)amino)pentanoic acid (2) and 5-(bis(quinolin-2-ylmethyl)amino)pentanoic acid (3) in the presence of HOBT-EDCI in DMF provided a second novel series of bifunctional chelators: 5-(bis(pyridin-2-ylmethyl)amino)pentanoic acid [(3-hydroxy-5-(5-methyl-4-oxo-3,4-dihydro-2H-pyrimidin-1-yl)tetrahydrofuran-2-yl)methyl] amide (L3), 5-(bis(quinolin-2-ylmethyl)amino)pentanoic acid [(3-hydroxy-5-(5-methyl-4-oxo-3,4-dihydro-2H-pyrimidin-1-yl)tetrahydrofuran-2-yl)methyl] amide (L4), 5-(bis(pyridin-2-ylmethyl)amino)pentanoic acid [2-(2,4-dioxo-3,4-dihydro-2H-pyrimidin-1-yl)-4-hydroxy-5-(hydroxymethyl)tetrahydrofuran-3-yl] amide (L6), and 5-(bis(quinolin-2-ylmethyl)amino)pentanoic acid [2-(2,4-dioxo-3,4-dihydro-2H-pyrimidin-1-yl)-4-hydroxy-5-(hydroxymethyl)tetrahydrofuran-3-yl] amide (L7). The rhenium tricarbonyl complexes of L1-L4, L6, and L7, [Re(CO)3(LX)]Br (X=1-4, 6, 7: compounds 5-10, respectively), have been prepared by reacting the appropriate ligand with [NEt4][Re(CO)3Br3] in methanol. The ligands and their rhenium complexes were obtained in good yields and characterized by common spectroscopic techniques including 1D and 2D NMR, HRMS, IR, cyclic voltammetry, UV, and luminescence spectroscopy and X-ray crystallography. The crystal structure of complex 6.0.5NaPF6 displays a facial geometry of the carbonyl ligands. The nitrogen donors of the tridentate ligand complete the distorted octahedral spheres of the complex. Crystal data: monoclinic, C2, a = 24.618(3) A, b = 11.4787(11) A, c = 15.5902(15) A, beta = 112.422(4) degrees , Z = 4, D(calc) = 1.562 g/cm3.     

Reaction of 3,4,6-trioxoalkanoic acid esters with 2,4-dinitrophenylhydrazine

Methyl 3,4,6-trioxoalkanoates (3,4-dihydroxy-6-oxo-2,4-alkadienoates) reacted with 2,4-dinitrophenylhydrazine to give methyl 3,6-bis[(2,4-dinitrophenyl)hydrazinylidene]-4-oxoalkanoates or methyl {5-alkyl-2-hydroxy-1-(2,4-dinitroanilino)-3-oxo-2,3-dihydro-1H-pyrrol-2-yl }acetates. Alkyl 3,6-bis[(2,4-dinitrophenyl) hydrazinylidene]-4-oxoalkanoates were also synthesized by reaction of disodium 1-alkoxy-1,6-dioxoalka-2,4-diene-3,4-diolates with 2,4-dinitrophenylhydrazine.     

Solubility of carbon dioxide,methane, and propane in silicone polymers: Effect of polymer side chains

The solubility of methane, carbon dioxide, and propane in five silicone polymers was measured at 10.0, 35.0 and 55.0°C and at pressures up to 26 atm. The polymers were poly(dimethyl siloxane), poly(methyl propyl siloxane), poly(methyl octyl siloxane), poly(trifluoropropyl methyl siloxane), and poly(phenyl methyl siloxane). At a given temperature and pressure, the solubility of the penetrant gases decreases with increasing bulkiness of the polymer side chains, and with decreasing critical temperature of the penetrant. The solubility of carbon dioxide in poly(trifluoropropyl methyl siloxane) appears to be anomalously high, possibly because of specific penetrant/polymer interactions. The temperature and pressure dependence of the solubility coefficients for the penetrant/polymer systems studied are described, and different methods of correlating these coefficients are compared.     

p<Emphasis Type="Italic">K</Emphasis><Subscript>a</Subscript> Determinations for Montelukast Sodium and Levodropropizine

The pK _a constants and relative abundances of unionized and ionized forms of Montelukast sodium {the sodium salt of 2-[1-[[(1R)-1-[3-[2-(7-chloroquinolin-2-yl)ethenyl] phenyl]-3-[2-(2-hydroxypropan-2-yl)phenyl]propyl]sulfanylmethyl]cyclopropyl]acetic acid} and Levodropropizine {(2S)-3-(4-phenylpiperazin-1-yl)propane-1,2-diol} were determined potentiometrically from measurements at various pHs. These determinations were in order to relate their pK _a values with their bioavailability and to provide chemical data to be used in their analysis.     

Synthesis,characterization, and electroluminescence of polyfluorene copolymers containing T‐shaped isophorone derivatives

We have successfully synthesized a series of new fluorene‐based copolymers, poly[(9,9‐bis(4‐octyloxy‐phenyl)fluorene‐2,7‐diyl)‐co‐[2(3{2[4(2{4[bis(bromophenyl‐4yl) amino]phenyl}vinyl)‐2,5‐bisoctyloxyphenyl]vinyl}‐5,5‐dimethyl‐cyclohex‐2‐enylidene)malononitrile] (PFTBMs), with varying molar ratios of the low‐energy band gap comonomer, 2(3{2[4(2{4[bis(4‐bromophenyl)amino]phenyl}vinyl)‐2,5‐bisoctyloxyphenyl]vinyl}‐5,5‐dimethyl‐cyclohex‐2‐enylidene)malononitrile (BTBM). To prepare BTBM (which has a T‐shaped structure) from triphenylamine, dialkoxy phenyl, and isophorone, we introduced three individual segments of an isophorone derivative containing two cyanide groups at the carbonyl position, a dialkoxy phenyl group for increased solubility, and a triphenyl amine for effective charge transfer. Furthermore, we introduced vinyl linkages between each segment to increase the length of π‐conjugation. The synthesized polyfluorene copolymers with the BTBM, PFTBMs, were synthesized via palladium‐catalyzed Suzuki coupling reactions. The photoluminescence emission spectra of the synthesized polymers in solution did not show significant energy transfer from PBOPF segments to the BTBM units. Light‐emitting devices based on these polymers were fabricated with an indium tin oxide/poly(3,4‐ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS)/polymers/Balq/LiF/Al configuration. Examination of the electroluminescence emission of the synthesized polymers showed that the maximum wavelength shifted continuously toward long wavelengths with as the number of BTBM units in the polymer main chain was increased. In particular, a device using PFTBM 05 exhibited a maximum brightness of 510 cd/m² and a maximum current efficiency of 0.57 cd/A. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 82–90, 2010     

双枝[1,3,4]-噁二唑衍生物的合成与荧光性质

通过Wittig反应和Heck反应合成了三个双枝噁二唑衍生物: N-{{{3,5-二-[5-(4-叔丁基苯基)-1,3,4-噁二唑-2]-苯基}-E-乙烯基}-4-苯基}二苯胺(BBOD-2), N,N-双{{{3,5-二-[5-(4-叔丁基苯基)-1,3,4-噁二唑-2]-苯基}-E-乙烯基}-4-苯基}苯胺(BBOD-3), N,N,N-三{4-{2-{3,5-二-[5-(4-叔丁基苯基)-1,3,4-噁二唑-2]-苯基}-E-乙烯基}苯基}胺(BBOD-4). 化合物结构经过红外光谱、核磁共振谱、质谱和熔点确证, 测定了它们在不同溶剂中的紫外光谱和单光子荧光光谱. BBOD-1, BBOD-2, BBOD-3, BBOD-4在二氯甲烷中的最大吸收峰分别位于295, 390, 398和408 nm; 最大发射峰分别为360, 486, 483和487 nm. 讨论了Stokes位移与溶剂极性的关系.     

Organic vapor sensing properties of copolymer Langmuir-Blodgett thin film sensors

In this study, a novel poly[Styrene (ST)-co-Glycidyl Methacrylate (GMA)] copolymer material is used to fabricate Langmuir-Blodgett (LB) thin films and investigate organic vapor sensing properties. Quartz Crystal Microbalance (QCM) system is used to investigate gas sensing performance of copolymer LB films during exposure to Volatile Organic Compounds (VOCs). The poly[Styrene (ST)-co-Glycidyl Methacrylate (GMA)] LB thin film sensor sensitivities are determined to be between 0.12 and 0.25 Hz ppm^?1. Detection limits of the copolymer LB thin film are found to be between 23 and 49 ppm against organic vapors. The copolymer LB thin films are more sensitive to chloroform than other vapors used in this study. The results demonstrated that the poly[Styrene (ST)-co-Glycidyl Methacrylate (GMA)] copolymer material is promising as a organic vapor sensing device at room temperature.     

Synthesis of 2-hydroxy-2-phenylethylamino derivatives as potential α-adrenergic blocking agents

The synthesis of N,N'-bis[6-(2-hydroxy-2-phenylethylamino)hexyl] cystamines 4 , and N-(2-hydroxy-2-phenylethyl)-1,6-hexanediamines 6 are described. Compounds 4 were obtained by condensation of the requisite epoxide 2 with 3-(6-aminohexyl)-1,3-thiazolidine followed by dimerization with opening of the thiazolidine ring. A similar method was used for the preparation of compounds 6. In order to prepare 4j (N,N'-bis{6-[2-hydroxy-2(3,4-dihydroxyphenyl)ethylamino]hexyl}cystamine), several procedures were tested; the method of choice involved the use of 3,4-dihydroxybenzaldehyde with both hydroxy groups protected as methoxymethyl ethers.