Adhesive properties of rubbers with promoters based on modified silica filler

The influence of new adhesion promoters on the strength of bonding between unfilled rubber materials based on synthetic isoprene rubber SKI-3 and a brass-plated metal cord was studied. The synthesized adhesion promoters are silica fillers modified with cobalt, nickel, or a combination of cobalt and nickel, and they contain on their surface a lower number of ions of metals with variable valency compared to industrial cobalt stearate. It was shown that, among the synthesized adhesion promoters, silica fillers modified with cobalt are the most promising.     

Modified Silica Filler as a Promoting Agent of Adhesion of Rubber to Metal Cord

In order to increase the strength of the adhesive bonding of rubber based on SKI-3 rubber substance to metal cords, the effect of adhesion-promoting agents, which are silicic filler modified by metal ions of variable valency (Co and Ni), has been investigated. It is shown that such adhesion-promoting agents do not have a significant effect on the technological and physicomechanical properties of rubber at room temperature, but increase the resistance of vulcanizates to elevated temperatures (up to 100°C) and increase the strength of the rubber–metal cord connection under the influence of aggressive factors in the process operation of metal cord products.     

Model hydrophobing compounds with nitrogen or sulphur atoms in oxyethylene structures,as modifiers of silica filler

Results of studies are presented on effect of new model compounds, applied to modify precipitated silica, on reinforcing of butadiene-styrene rubber vulcanizates filled with modified silica. Precipitated silica applied for the pur pose has been obtained according to our own procedure. Estimation of heats of immersion, mainly in benzene, has documented effect of model compounds involving hydrophobization of silica surface.For comparative reasons, results of strength tests have also been presented on vulcanizates of butadiene-styrene rubber filled with silica modified with a recognized coupling agent-mercaptosilane A-189.     

Effects of the degree of surface modification on the rheological responses of precipitated silica suspensions in benzyl alcohol

Two types of precipitated silica powders modified by poly (dimethylsiloxane) (PDMS) were suspended in benzyl alcohol and their rheological properties were investigated as a function of silica volume fraction, φ. The suspensions were classified into sol, pre-gel, and gel states based on the increase in φ. An increase in the degree of surface modification by PDMS caused gelation at higher φ. Plots of apparent shear viscosity against shear rate in the sol and pre-gel states of highly modified silica suspensions showed weak shear thickening behavior, while the same plots for silica suspensions with a low modification level exhibited shear thinning behavior. The dynamic moduli of hydrophobic suspensions in the pre-gel and gel states were dependent on the surface modification: the storage modulus G′ was larger than the loss modulus G″ in the linear region and these moduli increased with increasing φ, irrespective of the silica powder. The linear region of the φ range for the precipitated silica suspensions was wider than that for the fumed silica powders modified by PDMS suspended in benzyl alcohol, while the G′ value in the linear region for the precipitated silica suspensions was less than those for the fumed silica suspensions.     

A new method for crosslinking and reinforcing acrylonitrile–butadiene rubber using a silanized silica nanofiller

Using a high loading of synthetic precipitated amorphous white silica nanofiller, an acrylonitrile–butadiene rubber containing 26% by weight acrylonitrile was crosslinked and its mechanical properties were measured. The silica surfaces were pre‐treated with bis(3‐triethoxysilylpropyl)tetrasulfide (TESPT) to chemically adhere silica to the rubber. To optimize the reaction between the tetrasulfane groups of TESPT and the rubber, accelerator and activator were added. The rubber was fully crosslinked and the hardness, tensile strength, stored energy density at break, elongation at break, tearing energy, and modulus increased substantially because of the filler. The bound rubber, crosslink density, tan δ, and glass transition temperature measurements indicated a strong interaction between the filler and rubber. This new method helped to substantially reduce the use of the curing chemicals and produce a safer and more cost‐effective rubber compound without compromising the good mechanical properties of the rubber, which are essential for long service life. Copyright © 2009 John Wiley & Sons, Ltd.     

Rubber products prepared from silica modified by radiation-induced admicellar polymerization

Unmodified silica, silica modified with Si69, silica modified by thermal admicellar polymerization and silica modified by radiation-induced admicellar polymerization were applied as rubber reinforcement. Mechanical properties of these different rubber formulae were subsequently tested. The results revealed that the mechanical properties of rubber reinforced with silica modified by admicellar polymerization were superior to those reinforced with unmodified silica or silica modified with Si69. As for the silica modified by admicellar polymerization, cetyltrimethyl ammonium bromide (CTAB) proved to be the most effective surfactant, compared to dodecyltrimethyl ammonium bromide (DTAB) and tetradecyltrimethyl ammonium bromide (TTAB).     

Synthesis and modification of fillers with derivatives of benzoic acids

The subject of this research work was an effect of liquid crystals on the properties of filled elastomer systems. Both commercially available and own synthesized liquid crystals were used. The elastomer was ethylene-propylene rubber, while precipitated silica and calcium carbonate were used as fillers. The liquid crystals were deposited on the surface of the fillers from solution. Their effect on the mechanical properties of the vulcanizates was studied.     

Effect of fly ash silica and precipitated silica fillers on the viscosity,cure, and viscoelastic properties of natural rubber

The viscosity, cure properties, storage, and loss moduli and tan δ of natural rubber (NR) filled with the same amounts of precipitated silica (PSi) and fly ash silica (FASi) fillers were measured. The fillers were treated with bis[3‐triethoxysilylpropyl‐]tetrasulfide (TESPT), or, used in the rubber untreated. TESPT is a sulfur‐containing bi‐functional organosilane that chemically adheres silica to rubber and also prevents silica from interfering with the reaction mechanism of sulfur cure. The dispersion of PSi and FASi in the rubber was investigated using scanning electron microscope (SEM). The effects of silica type and loading and surface treatment on the aforementioned properties were of interest. The SEM results showed that the FASi particles were larger in size and had a wider particle size distribution when compared with the PSi particles. The viscosity of the compounds decreased progressively with mixing time, and the compounds with FASi had a lower viscosity than those filled with PSi. The treatment with Si69 had no beneficial effect on the dispersion of the fillers in the rubber matrix. At low temperatures, the type and loading of the filler had no effect on the storage and loss moduli of the compounds, but the effect was more pronounced at high temperatures. There was also evidence from the tan δ and glass transition temperature (T_g) measurements that some limited interaction between the filler particles and rubber had occurred because of TESPT. Copyright © 2008 John Wiley & Sons, Ltd.     

Reinforcement of compatibilized NR/NBR blends by fly ash particles and precipitated silica

Effects of precipitated silica (PSi) and silica from fly ash (FA) particles (FASi) on the cure and mechanical properties before and after thermal and oil aging of natural rubber (NR) and acrylonitrile–butadiene rubber (NBR) blends with and without chloroprene rubber (CR) or epoxidized NR (ENR) as a compatibilizer have been reported in this paper. The experimental results suggested that the scorch and cure times decreased with the addition of silica and the compound viscosity increased on increasing the silica content. The mechanical properties for PSi filled NR/NBR vulcanizates were greater than those for FASi filled NR/NBR vulcanizates in all cases. The PSi could be used for reinforcing the NR/NBR vulcanizates while the silica from FA was regarded as a semi‐reinforcing and/or extending filler. The incorporation of CR or ENR enhanced the mechanical properties of the NR/NBR vulcanizates, the ENR being more effective and compatible with the blend. The mechanical properties of the NR/NBR vulcanizates were improved by post‐curing effect from thermal aging but deteriorated by the oil aging. Copyright © 2008 John Wiley & Sons, Ltd.     

Surface modification of silica nanoparticles by a polyoxyethylene sorbitan and silane coupling agent to prepare high-performance rubber composites

The interfacial interaction between nano-silica and rubber matrix is very important for the preparation of high-performance rubber composites. In this paper, we first proposed the use of TWEEN-20 as a new silica modifier, it has four long arms consisting of three polyether chains with terminal hydroxyl group and a fatty chain. The oxygen on the polyether can form a hydrogen bond with the silanol groups on silica surface, and the terminal hydroxyl groups can chemically react with the silanol groups without any VOCs. Moreover, the long fatty chain can weaken silica polarity to obtain a better compatibility with rubber, so that silica modified by TWEEN-20 with chemical reaction and physical absorption can homogeneously disperses in rubber matrix. Nextly, we prepared high-performance natural rubber (NR) composites by adjusting the ratio of TWEEN-20 to TESPT to adjust the physical and chemical interaction between nano-silica and rubber molecular chains. The results indicated that the performances, including the filler dispersion, static mechanical properties, and dynamic heating (viscoelastic self-heating), were optimal when the ratio of TESPT to TWEEN-20 was 2:1. In addition, one-third of TESPT was replaced by TWEEN-20 to prepare silica/rubber composites, which can reduce one-third of VOCs, improve “scorchy”, and achieve high dispersion of silica.     

Modification estimate of kaolin,chalk, and precipitated calcium carbonate as plastomer and elastomer fillers

Investigation into possible modifications of surfaces of white fillers such as Kornica chalk, precipitated calcium carbonate and KOG Kaolin. The surfaces of these fillers were modified with a variety of proadhesive compounds in different amounts. Optimum proadhesive compound was determined for each kind of filler. The modified fillers were tested in rubber mixtures based on butadiene-styrene rubber and in polyurethanes.     

Development of adhesive ozone-resistant compositions based on chlorosulfonated polyethylene for elastomeric materials

Chlorosulfonated polyethylene (CSPE) is modified by a Diafen FP amine-containing compound. It is shown that compositions based on modified CSPE can be used as adhesive compositions for rubber splicing and coatings for rubber protection from ozone aging.     

Properties and Application of a Chelating Sorbent Prepared by Modification of LiChroprep-NH<Subscript>2</Subscript> with Calcon

A new chelating sorbent for metal ions was prepared by modification of chemically modified silica – LiChroprep-NH₂ with Calcon. The molecular mechanism of binding this reagent to the surface of the applied carrier is presented. The properties of this sorbent were compared to analogous sorbents with a plain silica carrier and chemically modified silicas – LiChroprep-RP containing Calcon. The advantages of the new sorbent compared to the silica and LiChroprep-RP chelating sorbents are demonstrated. The sorbent obtained was applied as stationary phase in solid-phase extraction (SPE) for separations of some chosen mixtures of metal ions and for additional purification of aqueous solutions of salts of alkali metals from trace amounts of heavy metals. The multiple use of the sorbent based on LiChroprep-NH₂ in sorption-desorption processes of metal ions without deterioration of its sorption capacity is demonstrated.     

改性低分子量聚异戊二烯橡胶的合成与应用

采用阴离子溶液聚合法合成了低分子量3,4-聚异戊二烯(LPI), 并对其进行改性, 制备了硅氧烷改性的低分子量3,4-聚异戊二烯(MLPI), 将其应用于白炭黑补强的溶聚丁苯橡胶(SSBR)复合材料, 探究了端基改性物LPI-丙基甲基二甲氧基硅烷(LPI-CMDS)、 LPI-丙基三甲氧基硅烷(LPI-CTMS)、 LPI-丙基三乙氧基硅烷(LPI-CTES)和接枝改性物3-巯丙基三乙氧基硅烷接枝改性LPI(LPI-g-MTS)对SSBR复合材料中白炭黑的分散以及硫化胶性能的影响. 混炼胶的应变扫描和结合胶含量分析结果表明, MLPI增强了填料与聚合物之间的相互作用, 改善了白炭黑在复合材料中的分散, 其中LPI-g-MTS因活性位点多, 效果最佳; 与填充LPI的复合材料相比, 硫化胶的物理机械性能, 尤其是填充LPI-g-MTS后硫化胶的300%定伸应力和拉伸强度分别提升了89.66%和27.15%, 这为改善白炭黑在非极性橡胶中的分散提供了一条新途径.     

Improvement of properties of silica‐filled styrene‐butadiene rubber composites through plasma surface modification of silica

The performance of plasma surface modified silica filler in styrene‐butadiene rubber (SBR) matrix has been analyzed. The conditions of plasma modification have been optimized by taking secant modulus as a standard parameter and the occurrence of the modification has been confirmed by surface area determination and Fourier transform infrared spectroscopy. The plasma‐modified surface of silica has been found to be composed of carbon–carbon double bonds and carbon–hydrogen bonds. Silane treatment also has been carried out on silica filler surface for a comparative assessment of its influence in the curing behavior and filler–rubber interaction. The cure reactions of all the rubber compounds have been found to be proceeded according to first‐order kinetics. A reduction in the cure reaction rate constant has been observed with the loading of unmodified and surface modified silica, emphasizing the cure deactivation of the matrix rubber by the silica filler. The filler dispersion, as revealed by scanning electron microscopy, has been found to be greatly improved by the plasma as well as silane treatment. The filler–rubber interaction has been found to be greatly improved by both surface treatments, but the best balance of mechanical properties has been observed with plasma surface modification only. Copyright © 2004 John Wiley & Sons, Ltd.     

橡胶-填料相互作用对丁苯橡胶/白炭黑复合材料性能的影响

本文研究了硅烷偶联剂原位改性白炭黑对溶聚丁苯橡胶(SSBR)性能的影响,结果表明,通过哈克转矩流变仪对含有偶联剂的SSBR/白炭黑混炼胶进行原位热处理后可明显减弱混炼胶的Payne效应,改善白炭黑在橡胶基体中的分散.原位热处理方法能够明显提高硫化胶的300%定伸应力,降低动态压缩温升,同时可使硫化胶在0℃附近具有较高的损耗因子(tanδ),60℃附近具有较低的tanδ.对不同聚合方式得到的丁苯橡胶,即溶聚丁苯橡胶与乳聚丁苯橡胶(ESBR)/白炭黑复合材料的力学性能及动态力学性能进行了研究,结果表明,白炭黑在SSBR2305中分散效果优于在ESBR1502中;采用偶联剂原位改性白炭黑可以使SSBR2305硫化胶获得与ESBR1502硫化胶相当的物理机械性能,更理想的动态力学性能,从而得到力学性能、抗湿滑性、滚动阻力及耐磨性更加均衡的理想轮胎材料.通过对具有不同偶联效率的SSBR/白炭黑体系的微观结构与性能研究发现,随偶联效率的增加,其结合橡胶含量增加,Payne效应减弱;高偶联效率的S-SBR具有较低的动态压缩温升及较好的耐磨性.     

一种新型硅藻土填充橡胶纳米复合材料研究

橡胶的填料问题一直是人们的研究热点,针对炭黑和白炭黑在橡胶生产中存在的污染问题,本文选用成分结构与白炭黑类似的硅藻土来填充各种橡胶。首先对硅藻土进行了改性,并对不同改性剂改性硅藻土用于填充橡胶进行了研究。结果表明2.5份偶联剂Si69的改性效果最佳。通过机械共混法制备了改性硅藻土/橡胶纳米复合材料,通过力学性能测试确定了比较适合硅藻土填充的橡胶是氟橡胶、三元乙丙橡胶和丙烯酸酯橡胶。绿色环保且价格低廉的硅藻土可以替代白炭黑增强填充氟橡胶、三元乙丙橡胶和丙烯酸酯橡胶。     

Fly ash particles and precipitated silica as fillers in NR/CR vulcanizates under thermal and thermal‐oil ageing

The loading effect of precipitated silica (PSi) and fly ash‐based silica (FASi) on mechanical properties of natural rubber/chloroprene (NR/CR) under thermal and thermal‐oil ageing was investigated with variation in NR content in the NR/CR blends. The selected results were compared with vulcanized NR/nitrile rubber (NR/NBR) blends. The cure time of CR vulcanizate was found to decrease with increasing NR content, but increased with silica fillers. The Mooney viscosity for CR vulcanizates reduced with increasing NR content. The addition of NR had no effect on tensile modulus and tensile strength for the FASi filled NR/CR, but the opposite trend was observed for the PSi filled NR/CR. The post‐curing effect was more significant in PSi filled NR/CR than in FASi filled NR/CR. The tensile strength of the NR/CR vulcanizates was slightly reduced after thermal ageing especially at high NR content, more extreme reduction being found by thermal‐oil ageing. The elongation at break of NR/CR with both silica fillers ranged from 400 to 900%. The hardness results were similar to the tensile modulus. The addition of PSi in NR/CR considerably increased the tear strength, but less pronounced effect was found for FASi. The resilience properties of NR/CR tended to decrease with increasing silica content. The compression set became poorer when NR content was increased. The PSi showed higher improvement in compression set than the FASi. The effects of silica and ageing on the mechanical properties for NR/CR vulcanizates were similar to those for NR/NBR vulcanizates. Copyright © 2009 John Wiley & Sons, Ltd.     

Understanding the effect of filler shape induced immobilized rubber on the interfacial and mechanical strength of rubber composites

Styrene butadiene rubber (SBR) composites with silica, halloysite nanotubes (HNTs) and montmorillonite (MMT) were prepared and the interfacial and mechanical properties were compared to understand the reinforcing behaviours of these fillers based on the results of SEM, DSC, DMA, etc. Due to the formation of interparticle domain, HNTs immobilized more rubber approaching their surface than silica and MMT. Interestingly, only tightly immobilized rubber chains made contribution to the enhancement of interfacial and mechanical strength of SBR composites. This was because the tightly immobilized rubber acted as a bridge in the filler-rubber interface and induced the formation of stretched rubber chains linked filler network when the composites were loaded in tension, while loosely immobilized rubber were easy to slip off from filler surface, causing the separation between filler and bulk rubber. Therefore, silica with more tightly immobilized rubber approaching its surface showed better reinforcing effect on rubber than HNTs and MMT.     

Thermal stability of styrene butadiene rubber (SBR) composites filled with kaolinite/silica hybrid filler

Styrene butadiene rubber (SBR) composites filled with fillers, such as modified kaolinite (MK), precipitated silica (PS), and the hybrid fillers containing MK and PS, were prepared by melt blending. The kaolinite sheets were finely dispersed in the SBR matrix around 20–80 nm in thickness and reached the nano-scale. The SBR composites with fillers exhibited excellent thermal stability compared to the pure SBR. The thermal stability of SBR composites was improved with the increasing of MK mass fraction. When MK hybridized with PS, kaolinite sheets were covered by the fine silica particles and the interface between filler particles and rubber matrix became more indistinct. SBR composite filled by hybrid fillers containing 40 phr MK and 10 phr PS became more difficult in decomposition and was better than that of 50 phr PS/SBR and 50 phr MK/SBR in thermal stability. Therefore, the hybridization of the fine silica particles with the kaolinite particles can effectively improve the thermal stability of SBR composites.