Kinetics of crosslinking reactions. 1. Reaction rate of intramolecular crosslinkings by using a soluble microgel

Soluble microgels with several pendant vinyl groups were synthesized by radical copolymerization of methyl methacrylate (MMA) with p-divinyl benzene (p-DVB). The polymerization conditions used for intramolecular crosslinking of microgels were chosen from gel permeation chromatograph (GPC) measurements of the reaction products. The rate constant of intramolecular crosslinking (k_pⁱ) was estimated from the changes in the concentration of pendant vinyl groups of microgel by using photometrical measurements at 30°C assuming a unimolecular termination mechanism of polymer radicals. As a result, k_pⁱ showed larger values than k_p of styrene and depended strongly on the internal structure of the microgels.     

Role of dimethyl sulfoxide as a solvent for vinyl polymerization

Dimethyl sulfoxide has been used as a solvent in the polymerization of methyl methacrylate and styrene. The chain-transfer coefficients of the solvent and the values of δ [i.e., (2k_t)^1/2/k_p] in solvent-monomer mixtures of various compositions were determined. δ was observed to be dependent on the solvent concentration in the case of methyl methacrylate but remained constant in case of styrene. The lowering of the values of δ with increasing solvent concentration in case of methyl methacrylate has been attributed to an interaction between the solvent and poly(methyl methacrylate) radical resulting in lower termination rate.     

Free-radical polymerization of vinyl ferrocene

The results of quantitative studies of the rates of free-radical polymerization of vinyl ferrocene indicate that the latter has polymerization characteristics similar to those of styrene. The rates of homopolymerization of these two monomers in benzene at 70°C. were measured with the use of azobisisobutyronitrile as catalyst. The rate constants (k = R_p/[M][I]^1/2) are k_VF = (1.1 ? 1.8) × 10^?4, k_STY = 1.65 × 10^?4. Small amounts of vinyl ferrocene and styrene have similar effects on the rates of polymerizations of methyl methacrylate and ethyl acrylate and on the molecular weights of the resulting polymer. Polystyrene and poly(vinyl ferrocene) with similar molecular weights are isolated from polymerizations carried out under identical conditions. The rates of copolymerization of vinyl ferrocene—methyl methacrylate, vinyl ferrocene—styrene, and styrene—methyl methacrylate were determined by following the disappearance of monomers by means of gas chromatographic analyses. The relative reactivity for vinyl ferrocene is slightly lower than that for styrene.     

Vinyl polymerization. 275. Polymerization of vinyl monomers photosensitized by tetramethyltetrazene

A study of the photopolymerization of vinyl monomers in the presence of tetramethyltetrazene (TMT) was made. TMT was found to act as an effective sensitizer. In the photopolymerization of vinyl monomers such as methyl methacrylate or styrene the rate of polymerization was expressed by the equation: R_p = k[TMT]^1/2[monomer]. The chain-transfer constant of TMT under ultraviolet irradiation was estimated to be 3.8 × 10^?2 for the above monomers. A linear correlation was found to exist between the reactivity of dimethylamino radical toward the vinyl monomers and e values for the corresponding monomers.     

Photopolymerization of styrene,p-chlorostyrene,methyl methacrylate,and butyl methacrylate with polymethylphenylsilane as photoinitiator

The rates of photochemical polymerization of styrene (St), p-chlorostyrene (Cl-St), methyl methacrylate (MMA), and butyl methacrylate (BMA) with polymethylphenylsilane (PMPS) as an initiator were measured. Polymethylphenylsilane is photodegrated to form silyl radicals that may initiate polymerization of vinyl monomers. Rate constants k_p and k_t have been determined for these systems. A good correlation (log P = α + βμ) of the resonance stabilization (P) of the chain radicals and the dipole moment (μ) of the monomers is observed for these polymerization systems. This equation may be used to estimate the resonance stabilization (P) of a monomer and the polymerization rate constant (k_p). © 1996 John Wiley & Sons, Inc.     

Ionic Liquids - New Solvents in the Free Radical Polymerization

Summary: The analysis of the influence of ionic liquids (ILs) in polymer synthesis as an alternative for common organic solvents is still an active field of research. 1 Using ILs as solvents for free radical polymerizations implies a significant increase in polymerization rates and molecular weights which can be observed. In this work we examined the copolymerization behaviour of styrene (S) and methyl methacrylate (MMA), glycidyl methacrylate (GMA) and 2-hydroxypropyl methacrylate (HPMA) with acrylonitrile (AN) in 1-etyhl-3-methylimidazolium ethylsulfate ([EMIM]EtSO₄). ILs are liquids with comparable high polarities and viscosities. These two characteristic properties are strongly correlated with the rate coefficients of propagation k_p and termination k_t. 2 - 4 The rate constant of termination k_t decreases when the IL concentration and therefore the viscosity of the reaction mixture is increased, whereas the propagation rate coefficient k_p increases with increasing IL content. The viscosity of the IL can be varied by either working with mixtures of IL with conventional organic solvents – here the IL [EMIM]EtSO₄ was mixed with DMF – or by variation of the temperature. The influence of the viscosity of the IL ([EMIM]EtSO₄) on polymerization kinetics of methyl methacrylate (MMA) and styrene/acrylonitrile (S/AN) was investigated.     

Photopolymerization with the use of titanocene dichoride as sensitizer

Titanocene dichloride sensitized photopolymerization of vinyl ethers and styrene but did not polymerize methyl methacrylate and vinyl acetate. In the case of 2-chloroethyl vinyl ether, polymerization started rapidly some time after the color of the liquid had changed from orange to green. Polymerization was also achieved by heating the monomer at 60°C after stopping the irradiation at the end of the induction period. On the basis of the reactivity of the monomers and the effect of additives, polymerization is considered to proceed cationically. In case of the polymerization of styrene, conversion increased linearly with time. The k/k_t value of 6.3 × 10^?5l./mole-sec obtained for the polymerization of styrene agrees well with the value reported for radical polymerization. The agreement of the value and ineffective inhibition of polymerization in the presence of pyridine indicates the polymerization follows a radical mechanism. Copolymerization of styrene (M₁) and 2-chloroethyl vinyl ether (M₂) proceeded radically, and the reactivity ratios were r₁ = 2.5 and r₂ = 0.6.     

ESR studies of the radiation-induced multiple graft polymerization

The radiation-induced multiple-graft polymerization was studied by an ESR method. When methyl methacrylate vapor was introduced onto preirradiated polyethylene already grafted with styrene, the second step of grafting of methyl methacrylate occurred mainly in the polyethylene portion. The kinetic treatment proved that the termination rate constant k_t of methyl methacrylate decreased with the amount of styrene grafted in advance. On the other hand, when styrene vapor was introduced onto polyethylene grafted with methyl methacrylate, only radicals of poly(methyl methacrylate) decreased. In this case, the second step of grafting of styrene occurred in the poly-(methyl methacrylate) portion which covered the whole surface of the polyethylene powder. When monomer vapors were alternately introduced onto preirradiated polyethylene powder, the second step of grafting occurred at the growing chain end of the first monomer.     

Effect of triphenyl phosphite on the radical polymerization of styrene and methyl methacrylate

The effects of triphenyl phosphite (TPP) on the radical polymerization of styrene (St) and methyl methacrylate (MMA) initiated with α,α,-azobisisobutyronitrile (AIBN) was investigated at 50°C. The rate of polymerization of St and MMA at a constant concentration of TPP was found to be proportional to the monomer concentration and the square root of the initiator concentration. The rate of polymerization and the degree of polymerization of both St and MMA increased with increasing TPP concentration. The accelerating effect was shown to be due to the decrease of the termination rate constant k_t with an increase in the viscosity of the polymerization systems. The chain transfer constant C_tr of TPP in St and MMA systems was determined from the degree of polymerization system. The C_tr of TPP was almost zero in the St system and 6.5 × 10^?5 in the MMA system.     

Radiochemical studies of free-radical vinyl polymerizations. VI. Polymerization of methyl methacrylate in the presence of organotin PVC stabilizers

¹⁴C-Azoisobutyronitrile was used to initiate polymerizations of methyl methacrylate in the presence of the organotin compounds: tetrabutyltin, dibutyltin diacetate, dibutyltin dilaurate, dibutyltin di(ethyl mercaptide), dibutyltin di(dodecyl mercaptide), and dibutyltin dichloride. Only dibutyltin dichloride affected rates of polymerization significantly, and this was ascribed to an increase in the velocity constant k_p for the propogation reaction. No evidence was obtained for radical displacement reactions of the polymer radicals with bonds between tin and carbon, oxygen, sulfur, or chlorine. Transfer activity exhibited by the mercaptides was ascribed to traces of thiol impurity, possibly formed during storage. The relevance of these results to the mechanism of stabilization of poly(vinyl chloride) is briefly discussed.     

Vinyl polymerization. 413. Polymerization of vinyl monomer initiated by poly(vinylbenzyltrimethyl)-ammonium chloride

The polymerization of vinyl monomer initiated by an aqueous solution of poly(vinylbenzyltrimethyl)ammonium chloride (Q-PVBACI) was carried out at 85°C. Styrene, p-chlorostyrene, methyl methacrylate, and i-butyl methacrylate were polymerized, whereas acrylonitrile and vinyl acetate were not. The effects of the amounts of vinyl monomer, Q-PVBACI, and water on the conversion of vinyl monomer were studied. The overall activation energy in the polymerization of styrene was estimated as 79.1 kJ mol^?1. The polymerization proceeded through a radical mechanism. The selectivity of vinyl monomer was discussed by “a concept of hard and soft hydrophobic areas and monomers.”     

ESR study on radical polymerization and its application to microemulsion systems

Well-resolved electron spin resonance (ESR) spectra of propagating radicals of vinyl and diene compounds were observed in a single scan by a conventional CW-ESR spectrometry without the aid of computer accumulation and the specially designed cavity and cells. Although solvents which could be used for ESR measurements were restricted to nonpolar solvents, such as benzene, toluene, and hexane, new information on dynamic behavior and reactivity of the propagating radicals in the radical polymerization of vinyl and diene compounds were obtained. Thus, values of propagation rate constants (k_p) for vinyl and diene compounds were determined by an ESR method. Some of the k_p values were in a fair agreement with those obtained by a pulsed laser polymerization (PLP) method. Furthermore, polymer chain effect on apparent k_p was clearly observed in the radical polymerization of macromonomers and in the microemulsion polymerization. In ESR measurement on inclusion polymerization system, important information on the origin of the 9-line spectrum observed in the radical polymerization of methacrylate propagating radicals was obtained.     

The kinetics of enhanced spin capturing polymerization: Influence of the nitrone structure

Several nitrones and one nitroso compound have been evaluated for their ability to control the molecular weight of polystyrene via the recently introduced radical polymerization method of enhanced spin capturing polymerization (ESCP). In this technique, molecular weight control is achieved (at ambient or slightly elevated temperatures) via the reaction of a growing radical chain with a nitrone forming a macronitroxide. These nitroxides subsequently react rapidly and irreversibly with propagating macroradicals forming polymer of a certain chain length, which depends on the nitrone concentration in the system. Via evaluation of the resulting number‐average molecular weight, M_n, at low conversions, the addition rate coefficient of the growing radicals onto the different nitrones is determined and activation energies are obtained. For the nitrones N‐tert‐butyl‐α‐phenylnitrone (PBN), N‐methyl‐α‐phenylnitrone (PMN), and N‐methyl‐α‐(4‐bromo‐phenyl) nitrone (pB‐PMN), addition rate coefficients, k_ad,macro, in a similar magnitude to the styrene propagation rate coefficient, k_p, are found with spin capturing constants C_SC (with C_SC = k_ad,macro/k_p) ranging from 1 to 13 depending on the nitrone and on temperature. Activation energies between 23.6 and 27.7 kJ mol⁻¹ were deduced for k_ad,macro, congruent with a decreasing C_SC with increasing temperature. Almost constant M_n over up to high monomer to polymer conversions is found when C_SC is close to unity, while increasing molecular weights can be observed when the C_SC is large. From temperatures of 100 °C onward, reversible cleavage of the alkoxyamine group can occur, superimposing a reversible activation/deactivation mechanism onto the ESCP system. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1098–1107, 2009     

Simulation of Potentially Possible Reactions at the Initial Stages of Free-Radical Polymerization of Styrene and Methyl Methacrylate in the Presence of Fullerene C<Superscript>60</Superscript>

The quantum-chemical simulation of possible reactions occurring at the initial stage of the free-radical polymerizations of styrene and methyl methacrylate in the presence of fullerene C⁶⁰ is performed. The reactions of interaction between initiating and model short-chain growing radicals containing from one to three monomer units with fullerene are considered. It is shown that, at the initial stage of styrene polymerization, the addition of short-chain growing radicals to fullerene predominates (with respect to the reaction of chain propagation). In the case of methyl methacrylate polymerization in the presence of fullerene C⁶⁰, the induction period is absent because of a higher probability of the initiation and chain propagation reactions (compared with the chain-termination reaction of short growing poly(methyl methacrylate) chains on fullerene C⁶⁰). The formation of bis- and trisadducts of fullerene C⁶⁰ with short-chain styrene and methyl methacrylate growing radicals is analyzed. The quantum-chemical simulation results are confirmed by electron spectroscopy and ESR studies.     

Chain transfer by addition–substitution–fragmentation mechanism. I. End–functional polymers by a single-step free radical transfer reaction: Use of a new allylic linear peroxyketal

A new chain transfer agent, ethyl 2-[1-(1-n-butoxyethylperoxy) ethyl] propenoate (EBEPEP) was used in the free radical polymerization of methyl methacrylate (MMA), styrene (St), and butyl acrylate (BA) to produce end-functional polymers by a radical addition–substitution–fragmentation mechanism. The chain transfer constants (C_tr) for EBEPEP in the three monomers polymerization at 60°C were determined from measurements of the degrees of polymerization. The C_tr were determined to be 0.086, 0.91, and 0.63 in MMA, St, and BA, respectively. EBEPEP behaves nearly as an “azeotropic” transfer agent for styrene at 60°C. The activation energy, E_atr, for the chain transfer reaction of EBEPEP with PMMA radicals was determined to be 29.5 kJ/mol. Thermal stability of peroxyketal EBEPEP in the polymerization medium was estimated from the DSC measurements of the activation energy, E_ath = 133.5 kJ/mol, and the rate constants, k_th, of the thermolysis to various temperature. © 1994 John Wiley & Sons, Inc.     

Photoinitiated polymerization of methacrylic monomers in a polystyrene matrix: Kinetic,mechanistic, and structural aspects

The kinetics and mechanism of the photoinitiated polymerization of tetrafunctional and difunctional methacrylic monomers [1,6‐hexanediol dimethacrylate (HDDMA) and 2‐ethylhexyl methacrylate (EHMA)] in a polystyrene (PS) matrix were studied. The aggregation state, vitreous or rubbery, of the monomer/matrix system and the intermolecular strength of attraction in the monomer/matrix and growing macroradical/matrix systems are the principal factors influencing the kinetics and mechanism. For the PS/HDDMA system, where a relatively high intermolecular force of attraction between monomer and matrix and between growing macroradical and matrix occurs, a reaction‐diffusion mechanism takes place at low monomer concentrations (<30–40%) from the beginning of the polymerization. For the PS/EHMA system, which presents low intermolecular attraction between monomer and matrix and between growing macroradical and matrix, the reaction‐diffusion termination is not clear, and a combination of reaction‐diffusion and diffusion‐controlled mechanisms explains better the polymerization for monomer concentrations below 30–40%. For both systems, for which a change from a vitreous state to a rubbery state occurs when the monomer concentration changes from 10 to 20%, the intrinsic reactivity and k_p/k_t^1/2 ratio (where k_p is the propagation kinetic constant and k_t is the termination kinetic constant) increase as a result of a greater mobility of the monomer in the matrix (a greater k_p value). The PS matrix participates in the polymerization process through the formation of benzylic radical, which is bonded to some extent by radical–radical coupling with the growing methacrylic radica, producing grafting on the PS matrix. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2049–2057, 2001     

Determination of propagation and termination rate constants for some methacrylates in their radical polymerizations

Rotating sector determinations of k_p and 2k_t for ten methacrylates undergoing radical polymerization were carried out at 30°C. Ester groups in the monomers were: isopropyl, ethyl, β-cyclohexylethyl, methyl, γ-phenylpropyl, β-phenylethyl, β-methoxyethyl, benzyl, β-chloroethyl, and phenyl. Values of k_p obtained were 121, 126, 1190, 141, 149, 228, 249, 1250, 254, and 411 l./mole-sec., respectively; values of 2k_t × 10^?6 were 4.52, 7.35, 32.8, 11.6, 0.813, 1.88, 9.30, 41.9, 6.71, and 11.9 l./mole-sec., respectively. Omitting the data for the β-cyclohexylethyl and benzyl esters, a Taft correlation, log k_p = (0.70 ± 0.18)σ* + 2.2, was established, where σ* denotes Taft's polar substitutent constants for the above-mentioned ester groups. The steric substituent constants E_s were found to have no influence on k_p. Combination of k_p with r₂ data from copolymerization studies with styrene or methyl methacrylate as M₁ comonomer revealed that the more reactive monomer gave rise to the more reactive polymer radical. Monomer viscosities and molar volumes of the ester groups were found to correlate with 2k_t.     

Controlled radical polymerization catalyzed by copper(I)–sparteine complexes

Sparteine was found to be an efficient ligand because when complexed with copper(I) halide it generated a homogeneous catalyst for the atom transfer radical polymerization of styrene or methyl methacrylate, which was initiated by (1-bromoethyl)benzene in the former case and by p-toluenesulfonyl chloride in the latter. The plots of ln([M]₀/[M]) versus time and molecular weight versus monomer conversion exhibited linear dependencies, which indicated that the concentration of the living centers throughout polymerization was constant. The polydispersities of polystyrene and poly(methyl methacrylate) in both the bulk and solution polymerizations were quite low. An induction time was observed during the bulk polymerization of styrene; however, it was absent during the solution polymerization. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4191–4197, 1999     

Effect of glyoxylic oxime ether on radical polymerization of styrene

Methyl benzyloxyiminoacetate (MBOIA), a glyoxylic oxime ether, revealed different behaviors depending on the kinds of monomers used in the radical polymerization. MBOIA served as a retarder for styrene (St) and an inhibitor for vinyl acetate, whereas it showed little effect on the polymerization of methyl methacrylate. The retardation effect of MBOIA on the polymerization of St with dimethyl 2,2′‐azobisisobutyrate (MAIB) was examined in detail in benzene. The rate constant (k_x) of the reaction of MBOIA with polystyrene (PS) radical was 92 L/mol s at 50 °C, 112 L/mol s at 60 °C, and 143 L/mol s at 70 °C, indicating that the reactivity of MBOIA toward PS radical is less than that of St by a factor of about 3. The Arrhenius plot of k_x gave an activation energy of 20.3 kJ/mol. A nitrogen‐centered radical of a stationary state was observed by electron spin resonance (ESR) in the polymerization of St with MAIB at 60 °C in benzene in the presence of MBOIA, which is assignable to the radical (MBOIA ·) formed by addition of PS radical to MBOIA. The stationary MBOIA · concentration increased with increasing MBOIA concentration and then tended to be saturated at high concentrations. The rate constant of termination between MBOIA · radicals was 1.87 × l0⁵ L/mol s at 60 °C with ESR. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2772–2781, 2002     

Radical sensitization of acetylene pyrolysis

The kinetics of acetylene polymerization initiated by neopentane (Np) or acetone (Ac) decompositions has been investigated in a static reactor dynamically coupled to a modulated beam mass spectrometer between 850–950 K. Overall rates follow the expression: R = ?d[C₂H₂]/dt = k_s[X]^1/2[C₂H₂] + k_u[C₂H₂]² (I), where X represents Np or Ac and k_s, k_u the rate constants of the sensitized and unsensitized reactions, respectively. The rate law of the sensitized reaction clearly suggests a chain polymerization mechanism with k_s = k_p(k_i/k_t)^1/2 (i, t, and p stand for initiation, termination, and propagation, respectively). Remarkably, the derived values of k_p are nearly independent of the sensitizer, although Ac acts as a source of methyl radicals whereas Np also produces hydrogen atoms, and fall in the expected range for the addition of vinylic radicals to acetylene. It is shown that a chain transfer process involving the fast [1,5] intramolecular hydrogen atom shift in 4-methyl-buta-1,3-dien-1-yl radicals (CH₃? CH ? CH? CH ??H) followed by further addition to C₂H₂ and aromatization, transforms methyl radicals into hydrogen atoms and is able to account for the presence of toluene among the products of the sensitized reactions. Based on current thermochemical data for the but-1-en-3-yn-2-yl radical (CH₂??? C?CH) and present rates of propagation it is argued that if the unsensitized polymerization of acetylene also proceeded by a vinyl radical chain, then even the most favorable self-initiation reaction: 2C₂H₂ = C₄H₃ + H (a), would be far too slow. Finally, present results also show that acetone at impurity levels (? 0.1%) can not provide fast enough spurious initiation rates in chain mechanisms for the “unsensitized” acetylene pyrolysis at pressures above 10 torr.