Synthesis and anti-HIV-1 activity of 1,5-dialkyl-6-(arylselenenyl)uracils and -2-thiouracils

The 1,5-dialkyl-6-(arylselenenyl)uracils 10a-h and -2-thiouracils 10i-p have been synthesized as potential anti-HIV-1 agents. Cyclization of N-alkyl-N'-[3,3-di(methylthio)-2-alkylacryloyl]ureas 6a-d and -thioureas 6e-h in acetic acid either containing a catalytic amount of methanesulfonic acid at 80°or containing 1 equivalent of methanesulfonic acid at room temperature afforded 1,5-dialkyl-6-(methylthio)uracils 7a-d in 84–96% yields and 1,5-dialkyl-5,6-dihydro-6,6-di(methylthio)-2-thiouracils 11a-d in 88–99% yields, respectively. Oxidation of 7a-d and 11a-d with either 3-chloroperoxybenzoic acid in benzene or aqueous sodium periodate solution in methanol gave 1,5-dialkyl-6-(methylsulfonyl)uracils 8a-d in 88–98% yields and 1,5-dialkyl-6-(methylsulfinyl)-2-thiouracils 12a-d in 57–73% yields, respectively, which were subsequently treated with arylselenol 9a-b in ethanolic sodium hydroxide solution to afford 10a-p in 6099% yields. Of these compounds, 6-[(3,5-dimethylphenyl)selenenyl]-5-isopropyl-1-(3-phenylpropyl)uracil ( 10h ) inhibited HIV-1 replication in MT-4 cells at a 50% effective concentration (EC₅₀) of 0.0006 μM with a selective index of 44833, which is 7.7-fold more potent than AZT.     

Synthesis and polymerization of some optically active 2- and 1,2-substituted butadienes

Dehydration of (S)-3,5-dimethyl-1-hepten-3-ol gave: (3E)- (I) and (3Z)-(5S)-3,5-dimethyl-1,3-heptadienes (II) and 2-[(S)- 2-methylbutyl]-1,3-butadiene (III). 2-[(S)-1-Methylpropyl]-1,3-butadiene (IV) was also prepared similarly by dehydration of (S)-3,4-dimethyl-1-hexene-3-ol. Monomers I–IV we polymerized in the presence of the TiCl₄–Al(i-C₄H₉)₃ catalyst system and in emulsion with K₂S₂O₈ as initiator. Monomer IV was also polymerized in the presence of butyllithium. Specific rotations of polymers are of the same order of magnitude as that of monomers, with exception of polymers prepared by stereospecific polymerization of (S)-I and (S)-II. The acetone-soluble fraction of these polymers has a molar rotation similar to that of monomer, while the acetone-insoluble part has a lower rotation ([M]_D of monomer +53.2°; [M]_D of polymer, +5.9°).     

Synthesis and Characterization of High Performance Poly(amide-imide)s based on a New Diimide-diacide and Various Diamines

A new diimide-diacid, (4-(4-(2,6-diphenylpyridin-4yl)phenoxy)phenyl)-1,3-bis(trimellitimidobenzene) (PPMIB), was synthesized from the condensation reaction of a new diamine, (4-(4-(2,6-diphenylpyridin-4yl)phenoxy)phenyl)-3,5-diaminobezamide (PPDA), and trimellitic anhydride carboxylic acid (TMAA) in glacial acetic acid. The diimide-diacid (PPMIB) was characterized by FT-IR, ¹H-NMR and elemental analysis. A series of novel aromatic poly(amide-imide)s (PAIs) was synthesized by using direct polycondensation of PPMIB with various diamines in NMP in the presence of triphenylposphite and pyridine as condensing agents. The resulting PAIs were amorphous, readily soluble in many polar aprotic solvents and showed inherent viscosities of 0.35–0.50 dL/g. According to thermal analysis, these polymers exhibited glass transition temperatures (T_gs) in the range of 202–280°C and temperature of 10% weight loss (T₁₀) varied from 400 to 545°C in N₂. These polymers in NMP solution exhibited strong UV-Vis absorption maxima at 320°C nm and their fluorescence emission peaks appeared around 410–565 nm.     

Synthesis and Characterization of Organosoluble Polyimides Containing Pyridyl Moiety with Ether Linkages

Two novel diamine monomers, bis(4‐amino‐3,5‐dimethylphenyl)‐3‐pyridyl methane and bis(4‐aminophenoxy‐3,5‐dimethylphenyl)‐3‐pyridyl methane were synthesized. A series of pyridine containing aromatic polyimides derived from the diamines were synthesized through a typical two‐step polymerization method. Most of the polymers show good solubility in NMP, DMAc, DMF, DMSO and CHCl₃ at room temperature. These polyimides exhibit T_g in the range of 249–317°C and 10% wt loss (T₁₀) takes place in the range of 474–564°C in N₂ and 469–558°C in air. The polymers have tensile strength in the range of 88–96 MPa, elongation at break in the range of 8.5–12.5% and tensile modulus in the range of 1.5–2.1 GPa. These polyimides also have low dielectric constant (3.26–3.64 at 1 KHz and 3.24–3.61 at 10 KHz) and low moisture absorption (0.42–0.89%).     

Synthesis and polymerization of 1-(2,4,6-tricyanophenylthio)-3-[3,5-bis(n,n-dimethylamino)phenoxy]-2-propyl methacrylate; polymer effect on intramolecular charge–transfer interaction

1-[3,5-Bis(N,N-dimethylamino)phenoxy]-ω-(2,4,6-tricyanophenylthio)alkanes ( 1a–c ), where an electron-accepting 2,4,6-tricyanophenylthio group and an electron-donating 3,5-bis(N,N-dimethylamino)phenoxy one are linked with a spacer such as ethylene, trimethylene, and tetramethylene, were prepared in order to examine an effect of the spacer chain length on intramolecular charge–transfer interaction between the 2,4,6-tricyanophenylthio and 3,5-bis(N,N-dimethylamino)phenoxy groups. From the UV-vis spectra measurements of 1a–c , 1-[3,5-bis(N,N-dimethylamino)phenoxy]-3-(2,4,6-tricyanophenylthio)Propane ( 1b ) carrying the trimethylene chain as a spacer was found to have the strongest intramolecular charge–transfer interaction. A new methacrylate-type monomer carrying the 1b unit as a side chain, 1-(2,4,6-tricyanophenylthio)-3-[3,5-bis(N,N-dimethylamino)phenoxy]-2-propyl methacrylate ( 2 ), was prepared successfully in 9.2% total yield in seven steps. The monomer 2 homopolymerized in benzene, tetrahydrofuran, acetone, and dimethyl sulfoxide in the presence of 2,2′-azobis(isobutyronitrile) at 60°C to give polymers [poly( 2 )] with molecular weights of 6,000 to 98,000. An intramolecular charge–transfer interaction in the poly( 2 ) was found to be larger than that in the monomer 2 and to increase with an increase in the degree of polymerization of the poly( 2 ), suggesting that there is an existence of polymer effect other than the polymer effect due to the high local concentration of the donor-acceptor pair. © 1995 John Wiley & Sons, Inc.     

New organosoluble and thermally stable poly(amide‐imide)s with benzoxazole or benzothiazole pendent groups: synthesis and characterization

Two new benzoxazole or benzothiazole‐containing diimide‐dicarboxylic acid monomers, such as 2‐[3,5‐bis(N‐trimellitimidoyl)phenyl]benzoxazole ( 2 _o ) or 2‐[3,5‐bis(N‐trimellitimidoyl)phenyl]benzothiazole ( 2 _s ) were synthesized from the condensation reaction between 3,5‐diaminobenzoic acid and 2‐aminophenol or 2‐aminothiophenol in polyphosphoric acid (PPA) with subsequent reaction of trimellitic anhydride in the presence of glacial acetic acid, respectively, and two new series of modified aromatic poly(amide‐imide)s were prepared. This preparation was done with pendent benzoxazole or benzothiazole units from the newly synthesized diimide‐dicarboxylic acid and various aromatic diamines by triphenyl phosphite‐activated polycondensation. In addition, the corresponding unsubstituted poly(amide‐imide)s were prepared under identical experimental conditions for comparative purposes. Characterization of polymers was accomplished by inherent viscosity measurements, FT‐IR, UV–visible, ¹H‐NMR spectroscopy and thermogravimetry. The polymers were obtained in quantitative yields with inherent viscosities between 0.39 and 0.81 dl g^?1. The solubilities of modified poly(amide‐imide)s in common organic solvents as well as their thermal stability were enhanced compared to those of the corresponding unmodified poly(amide‐imide)s. The glass transition temperature, 10% weight loss temperature, and char yields at 800°C were, respectively, 7–26°C, 17–46°C and 2–5% higher than those of the unmodified polymers. Copyright © 2010 John Wiley & Sons, Ltd.     

Polyesters,polyurethanes and epoxy resins derived from 2,2′-(1,4-phenylenedivinylene)bis-8-hydroxyquinaldine and 6-(4-hydroxystyryl)-3-hydroxypyridine

New polyesters and polyurethanes as well as diepoxides bearing styrylpyridine segments were prepared utilizing 2,2′-(1,4-phenylenedivinylene)bis-8-hydroxyquinaldine (PBHQ) and 6-(4-hydroxystyryl)-3-hydroxypyridine (HSHP) as starting materials. The polyesters were prepared by reacting PBHQ or HSHP with terephthaloyl dichloride in the presence of an acid acceptor utilizing the solution polycondensation method. The polyurethanes were prepared from the reactions of PBHQ and HSHP with tolylene diisocyanate and methylenebis(4-phenylisocyanate). In addition, model diesters and diurethanes were synthesized by reacting PBHQ and HSHP with benzoyl chloride and phenyl isocyanate, respectively. Model compounds and polymers were characterized by FT-IR and ¹H-NMR spectroscopy as well as by DTA and TGA. Diepoxides were also prepared from the reactions of PBHQ and HSHP with epichlorohydrin which were polymerized in the presence of 4,4′-diaminodiphenylsulfone. The polyesters were the most thermostable polymers obtained. After curing at 240°C for 20 h, they were stable in N₂ up to 345–370°C and afforded anaerobic char yields of 65–75% at 800°C. © 1993 John Wiley & Sons, Inc.     

Synthesis and characterization of nadimidized 1-[(dialkoxyphosphinyl)methyl1]-2,4- and -2,6- diaminobenzenes and their polymerization to fire-resistant laminating resins

A series of nadimidized 1-[(dialkoxyphosphinyl1)methyl]-2,4- and -2,6-diaminobenzenes was prepared and polymerized thermally to yield highly crosslinked fire-resistant laminating resins. Bisnadimides were characterized by elemental analysis and Fourier-transform-infrared (FT–IR) and proton nuclear magnetic resonance (¹H-NMR) spectroscopy. Curing behavior of the polymer precursors was studied by differential scanning calorimetry (DSC). Char yield of polymers at 700°C was 64–69% and 30–60% in nitrogen and air atmospheres, respectively. The pyrolysis behavior of some bisnadimides was investigated by gas chromatography–mass spectroscopy (GC–MS). Cyclopentadiene was evolved by retrograde Diels–Alder reaction during processing, but most was captured by copolymerization. The fire-resistance of some polymers was evaluated by determining their limiting oxygen index and smoke evolution.     

Phospha-s-triazines. IV. Degradation studies of 1-diarylphospha-3,5-bis(perfluoroaliphatic)-2,4,6-triazines and 1,3,-bis(diarylphospha)-5-perfluoroaliphatic-2,4,6-triazines

Thermal and thermal oxidative stability evaluations were performed on mono- and diphospha-s-triazines at 235 and 316°C using sealed Pyrex ampoules. The specific compounds studied were: 1-diphenylphospa-3,5-bis(perfluoro-n-heptyl)-2,4,6-triazine, 1-diphenylphospha-3,5-bis(perfluoro-alkylether)-2,4,6-triazines, their respective pentafluorophenyl analogues, 1,3-bis(diphenylphospha)-5-perfluoro-n-heptyl-2,4,6-triazine and 1,3-bis(diphenylphospha)-5-perfluoroalkylether-2,4,6-triazine. All the compounds wherein phenyl groups were present on the phosphorous exhibited good thermal stability up to 316°C; the analogous pentafluorophenyl substituted materials were degraded extensively at these temperatures. The oxidative stability of both the mono- and diphospha-s-triazines was excellent at 235°C, but at 316°C some degradation was observed. This was more pronounced in compounds containing the perfluoroalkyl moiety on carbon than in the perfluoroalkylether substituted members of the series.     

Dielectric and switching properties of a highly tilted AFLC material (S)-(+)-4-(1-methylheptyloxycarbonyl)-2,3-difluorophenyl 4′-[3-(2,2,3,3,4,4,4-heptafluorobutoxy)prop-1-oxy]biphenyl-4-carboxylate

Thermodynamic, dielectric, optical and switching parameters of a single-phase antiferroelectric (AF) liquid crystalline material (S)-(+)-4-(1-methylheptyloxycarbonyl)-2,3-difluorophenyl 4′-[3-(2,2,3,3,4,4,4-heptafluorobutoxy)prop-1-oxy]biphenyl-4-carboxylate have been studied. These studies show wide temperature range (~97.8°C–25.3°C) of AF SmC^*_A phase in the material. The dielectric studies have been carried out in the frequency range of 1 Hz–35 MHz under planar anchoring conditions of the molecules. The dielectric spectrum of the SmC^*_A phase exhibits three relaxation modes due to the collective as well as individual molecular processes. Relaxation frequencies of these modes lie in the range of kHz–MHz regions. Relative permittivity of the material (at 10 kHz) varies from ~8.8 at 98.8°C to 9.9 at 41.0°C. Maximum tilt of the molecule in the SmC^*_A phase is ~43°C. Spontaneous polarisation, switching time and rotational viscosity have also been determined. The maximum value of P_S is ~439 nC/cm² and switching time is the order of 1–5 millisecond, whereas viscosity is moderate.     

Synthesis and characterization of new poly(N-1-adamantylmaleimide) and poly(N-1-diamantylmaleimide)

N-l-Diamantylmaleimide was synthesized by reaction of maleic anhydride with 1-aminodiamantane, followed by dehydration with acetic anhydride and sodium acetate. Poly(N-1-adamantylmaleimide) ( IIa ) and poly(N-l-diamantylmaleimide) ( IIb ) were polymerized using 2,2′-azobisisobutyronitrile (AIBN) as an initiator under different experimental conditions such as various initiator concentrations, solvents, polymerization temperatures, and polymerization times. Polymerizations of N-l-adamantylmaleimide in benzene at 60°C or in bulk gave polymers with molecular weights (2000–9500). The experimental results indicated that the propagation may be interrupted by steric hindrance of bulky and rigid substituents such as the adamantyl or diamantyl groups. In addition, the effect of chain transfer to monomer contributes to the relatively low activation energy. The glass transition temperatures of Ia and Ib were 204 and 216°C, respectively. The temperatures at 5% weight loss of the polymers IIa and IIb were above 412°C. © 1996 John Wiley & Sons, Inc.     

Zwitterionic polymerization of 1-[4-[(4-hydroxy-1-naphthyl)thio]butyl]quinuclidinium hydroxide inner salt

The zwitterion, 1-[4-[(4-hydroxy-1-naphthyl)thio]butyl]quinuclidinium hydroxide inner salt, was synthesized from tetrahydro-1-(4-hydroxy-1-naphthyl)thiophenium hydrochloride and quinuclidine and characterized by NMR and IR spectroscopy. Polymerization of the zwitterion was studied over the temperature range 175–225°C. The polymer was identified as poly(1,4-piperidinediylethyleneoxy-1,4-naphthylenethiotetramethylene) based on NMR and IR spectroscopy. The polymer was found to contain 3-butenylthio and 4-hydroxy-1-naphthyl end groups. Based on the signal area of the olefinic end group, the polymer M⌅_n varied between 8500 and 13,000. The highest molecular weight was achieved at the lowest temperature, indicating that termination became more favored at higher temperature. A mechanism is proposed to describe the polymerization. © 1996 John Wiley & Sons, Inc.     

Heat stable and organosoluble benzoxazole or benzothiazole-containing poly(imide-ester)s and poly(etherimide-ester)s: synthesis and characterization

Two series of poly(imide-ester)s (PIEs) and poly(ether-imide-ester)s (PEIEs), having benzoxazole or benzothiazole pendent groups, were conveniently prepared by the diphenylchlorophosphate-activated direct polyesterification of two bis(imide-carboxylic acid)s (1), such as 2-[3,5-bis(N-trimellitimidoyl)phenyl]benzoxazole (1 _O ) and 2-[3,5-bis(Ntrimellitimidoyl) phenyl]benzothiazole (1 _S ) and two bis(imide-ether-carboxylic acid)s (2), such as 2-[3,5-bis(4-trimellitimidophenoxy)-phenyl]benzoxazole (2 _O ), and 2-[3,5-bis(4-trimellitimidophenoxy)-phenyl]benzothiazole (2 _S ) with various aromatic dihydroxy compounds in the presence of pyridine and lithium chloride. The structures, solubilities and thermal properties of obtained polymers were investigated in detail. All of the resulting polymers were characterized by FTIR and ¹H-NMR spectroscopy and elemental analysis. All of the resulting polymers exhibited excellent solubility in common organic solvents, such as pyridine, tetrahydrofuran and m-cresol, as well as in polar organic solvents, such as N-methyl-2-pyrrolidone, N,N-dimethylacetamide, N,N-dimethylformamide and dimethyl sulfoxide. The modified polymers were obtained in quantitative yields with inherent viscosities between 0.47 and 0.67 dl·g^?1. Experimental results indicated that all the polymers had glass transition temperature between 198 °C and 262 °C, the decomposition temperature at 10% weight loss between 398 °C and 531 °C under nitrogen.     

Regioselectivity of the hydrolysis of 2-(1-alkoxyvinyl)-substituted imidazolidines, 1,3-thiazolidines,and 1,3-oxazolidines

2-(1-Alkoxyvinyl)-1,3-thiazolidines reacted with H₂O or D₂O in the presence of 105 mol % of p-toluenesulfonic acid or trifluoroacetic acid (20°C, 1 h) to give 2-acetyl-1,3-thiazolidine in quantitative yield. 2-(1-Alkoxyvinyl)-3,5-diphenylimidazolidines underwent hydrolysis in the presence of 20 mol % of an acid (20°C, 24 h) at the vinyloxy group with high regioselectivity yielding 2-acetylimidazolidines. Hydrolysis of 2-(1-alkoxyvinyl)-3-phenyl-1,3-oxazolidines in the presence of 10 mol % of p-toluenesulfonic acid (20°C, 5 days) takes two pathways, one of which involves the endocyclic C-O bond with ring opening and the other involves the vinyloxy group to produce 2-acetyl-3-phenyl-1,3-oxazolidine. Unlike phenyl-substituted 1,3-thiazolidines and imidazolidines, hydrolysis of their 3-methyl- and 3,5-dimethyl-substituted analogs in acid medium occurs mainly via ring opening. The observed hydrolysis pathways were interpreted in terms of B3PW91/6-311G(d,p) quantum-chemical calculations.     

Reactions of tetrasulfur tetranitride with bromomethyl ketones. One pot synthesis of 3,5-diaroyl- and 3,5-diacyl-1,2,4-thiadiazoles

Reactions of tetrasulfur tetranitride (S⁴N⁴) with aryl and alkyl bromomethyl ketones 1 in chlorobenzene at reflux temperature gave 3,5-diaroyl- and 3,5-diacyl-1,2,4-thiadiazoles 2 in 17-60% yields. No 1,2,5-thiadiazoles were detected. By heating of the two reactants at 115° without the solvent were also obtained 2 in 5-13% yields. Hydrolysis of 2 with sodium hydroxide in a mixture of ethanol, ethyl acetate, and water (v:v, 4:2:1) at 75° to 85° afforded the heretofore inaccessible 3-aroyl- and 3-acyl-1,2,4-thiadiazoles 3 in 17-79% yields.     

Heat-Resistant thermosetting polyamide and polymides with styrlpyridine segments derived from 2,2′-(1,4-phenylenedivinylene) bisaminoquinoline

The nitration of quinaldine by fuming nitric and sulfuric acid afforded nitroquinaldine. It was condensed with a half molar amount of 1,4-benzenedicarbaldehyde in the presence of acetic anhydride to yield 2,2′-(1,4-phenylenedivinylene) bisnitroquinoline. The latter was catalytically hydrogenated to the corresponding diamine, PBAQ. The new polyamide and polymides bearing styrylpyridine segments were prepared utilizing PBAQ as starting material. In addition, a model diamide and diimide were synthesized and characterized IR and ¹H-NMR spectroscopy. Inherent viscosities of polymers ranged from 0.31 to 0.60 dl/g. Certain polymer precursors such as a bismaleimide and bisnadimide were synthesized from the reactions of PBAQ with maleic and nadic anhydride, respectively. Their curing behavior was investigated by DTA. Curing of polyamide, polyimides, and polymer precursors at 240°C for 15 h yielded crosslinked polymers. They were stable up to 329–310°C in N₂ or air and afforded a char yield of 67–62% in N₂ at 800°C. © 1994 John Wiley & Sons, Inc.     

Polymerization of 5-(1-adamantyloxy)-2H-pyrrole-2-one

5-(1-Adamantyloxy)-2H-pyrrole-2 one has been homopolymerized and copolymerized with a variety of comonomers. Polymerization was conducted in chloroform solutions with α,α′-azobisisobutyronitrile initiator. Evidence of polymerization was achieved through infrared and NMR spectra and elemental analysis. Moderate molecular weights were achieved as determined by inherent viscosity measurements and gel-permeation chromatography. Photolysis of the polymers with ultraviolet radiation induces a photochemical rearrangement resulting in the formation of isocyanate functions. A proposed mechanism suggests α-cleavage of the carbonyl to give a 1,5-diradical which rearranges to a 1,3-diradical with subsequent ring closure to give a polymer with cyclopropyl isocyanate moieties in the backbone. DSC data show all polymers to display intense exothermic activity at temperatures near 200°C on initial heating and glass transition temperatures between 194 and 245.5°C on subsequent heating. Thermolysis of the homopolymer causes rearrangement to poly[N-(1-adamantyl) maleimide]. Reactivity ratios were determined for the systems styrene (M₁) and 5-(1-adamantyloxy)-2H-pyrrole-2-one (M₂) (r₁ = 0.06, r₂ = 0.07) and methyl methacrylate (M₁) and 5-(1-adamantyloxy)-2H-pyrrole-2-one(M₂) (r₁ = 0.35, r₂ = 0.70). Q and e values for 5-(1-adamantyloxy)-2H-pyrrole-2-one are 3.40 and 1.59, respectively.     

Synthesis and properties of hyperbranched polyurethanes,hyperbranched polyurethane copolymers with and without ether and ester groups using blocked isocyanate monomers

Starting from 3,5‐diamino benzoic acid, 2‐hydroxy propyl[3,5‐bis{(benzoxycarbonyl)imino}]benzyl ether, an AB₂‐type blocked isocyanate monomer with flexible ether group, and 2‐hydroxy propyl[3,5‐bis{(benzoxycarbonyl)imino}]benzoate, an AB₂‐type blocked isocyanate monomer with ester group, were synthesized for the first time. Using the same starting compound, 3,5‐bis{(benzoxycarbonyl)imino}benzylalcohol, an AB₂‐type blocked isocyanate monomer, was synthesized through a highly efficient short‐cut route. Step‐growth polymerization of these monomers at individually optimized experimental conditions results in the formation of hyperbranched polyurethanes with and without ether and ester groups. Copolymerizations of these monomers with functionally similar AB monomers were also carried out. The molecular weights of the polymers were determined using GPC and the values (M_w) were found to vary from 1.5 × 10⁴ to 1.2 × 10⁶. While hyperbranched polyurethanes having no ether or ester group were found to be thermally stable up to 217 °C, hyperbranched poly(ether–urethane)s and poly(ester–urethane)s were found to be thermally stable up to 245 and 300 °C, respectively. Glass transition temperature (T_g) of polyurethane was reduced significantly when introducing ether groups into the polymer chain, whereas T_g was not observed even up to 250 °C in the case of poly(ester–urethane). Hyperbranched polyurethanes derived from all the three different AB₂ monomers were soluble in highly polar solvents and the copolymers showed improved solubility. Polyethylene glycol monomethyl ether of molecular weight 550 and decanol were used as end‐capping groups, which were seen to affect the thermal, solution, and solubility properties of polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3877–3893, 2007     

Bismaleimides and bisnadimides derived from 2,5-bis(4-aminophenyl)-3,4-diphenylthiophene and their polymerization to heat-resistant matrix resins

Six new structurally different bismaleimides or bisnadimides based on 2,5-bis(4-aminophenyl)-3,4-diphenylthiophene (BADT) were synthesized and characterized by infrared (IR) and proton nuclear magnetic resonance (¹H-NMR) spectroscopy. Chain-extension of several bismaleimides was accomplished by incorporating various imide, amide, and urea groups. The bismaleimide and bisnadimide prepared by reacting BADT with maleic or nadic anhydride, respectively, were soluble in various organic solvents. The monomers were thermally polymerized or by a Michael reaction with certain aromatic diamines. Curing behavior was investigated by differential thermal analysis (DTA). The thermal and thermo-oxidative stability of polymers was evaluated by dynamic thermogravimetric analysis (TGA) and isothermal gravimetric analysis (IGA). The polymers derived from bismaleimide of BADT as well as from the bismaleimides chain-extended by imide groups were stable up to 355–392°C in N₂ or air and afforded anaerobic char yield 66–74% at 800°C. The polymers obtained by curing the bismaleimide-diamine adducts showed a relatively lower thermal stability.     

Self-crosslinkable polymers. IV. Copolymerization of 1-ethenyl-4-(2,3-epoxy-1-propoxy)benzene with vinylpyridines

Soluble and self-crosslinkable linear copolymers with pendant epoxy and pyridyl groups were obtained from 1-ethenyl-4-(2,3-epoxy-1-propoxy)benzene (M₁) and vinylpyridines (M₂) by the action of α,α′-azobisisobutyronitrile. The monomer reactivity ratios were determined in tetrahydrofuran at 60°C (r₁, r₂, and vinylpyridine given): 0.467, 0.638, 4-vinylpyridine; 0.556, 1.25, 2-vinylpyridine; 0.639, 1.38, 5-ethyl-2-vinylpyridine. The Q and e values for 1-ethenyl-4-(2,3-epoxy-1-propoxy)-benzene were calculated as 1.3–1.6 and ?1.1–?1.3, respectively, with the reported Q–e values for these vinylpyridines. The intrinsic viscosities of the copolymers were found to be 0.15–0.30 in tetrahydrofuran at 30°C and to be dependent on the copolymer composition. The copolymers with these vinylpyridines were amorphous, had no clear melting points, and became insoluble crosslinked polymers under heating without further addition of any curing agents.