Thermal decomposition of 1-butyne in shock waves

1-Butyne diluted with Ar was heated behind reflected shock waves over the temperature range of 1100–1600 K and the total density range of 1.36 × 10^?5?1.75 × 10^?5 mol/cm³. Reaction products were analyzed by gas-chromatography. The progress of the reaction was followed by IR laser kinetic absorption spectroscopy. The products were CH₄, C₂H₂, C₂H₄, C₂H₆, allene, propyne, C₄H₂, vinylacetyiene, 1,2- butadiene, 1,3-butadiene, and benzene. The present data were successfully modeled with a 80 reaction mechanism. 1-Butyne was found to isomerize to 1,2-butadiene. The initial decomposition was dominated by 1-butyne → C₃H₃ + CH₃ under these conditions. Rate constant expressions were derived for the decomposition to be k₇ = 3.0 × 10¹⁵ exp(?75800 cal/RT) s^?1 and for the isomerization to be k₄ = 2.5 × 10¹³ exp(?65000 cal/RT) s^?1. The activation energy 75.8 kcal/mol was cited from literature value and the activation energy 65 kcal/mol was assumed. These rate constant expressions are applicable under the present experimental conditions, 1100–1600 K and 1.23–2.30 atm. © 1995 John Wiley & Sons, Inc.     

Thermal decomposition of propane in shock waves

The thermal decomposition of propane was studied behind reflected shock waves over the temperature range 1100–1450 K and the pressure range 1.5–2.6 atm, by both monitoring the time variations of absorption at 3.39 μm and analyzing the concentrations of the reacted gas mixtures. The rate constants of the elementary reactions were discussed from the results. The rate constant expressions, k₁ = 1.1 × 10¹⁶ exp (?84 kcal/RT) s^?1 and k₄ = 9.3 × 10¹³ exp(?8 kcal/RT) cm³ mol^?1 s^?1, of reactions C₃H₈ → CH₃ + C₂H₅ and C₃H₈ + H → n-C₃H₇ + H₂ were evaluated, respectively.     

Reaction of atomic oxygen with cyclopentadiene

The reaction of 1,3-cyclopentadiene (CPD) with ground-state atomic oxygen O(³P), produced by mercury photosensitized decomposition of nitrous oxide, was studied. The identified products were carbon monoxide and the following C₄H₆ isomers: 3-methylcyclopropene, 1,3-butadiene, 1,2-butadiene, and 1-butyne. The yield of carbon monoxide over oxygen atoms produced (?_CO) was equal to the sum of the yields of C₄H₆ isomers in any experiment. ?_CO was 0.43 at the total pressure of 6.5 torr and 0.20 at 500 torr. We did not succeed in detecting any addition products such as C₅H₆O isomers. It was found that 3-methylcyclopropene was produced with excess energy and was partly isomerized to other C₄H₆ isomers, especially to 1-butyne. The excess energy was estimated to be about 50 kcal/mol. The rate coefficient of the reaction was obtained relative to those for the reactions of atomic oxygen with trans-2-butene and 1-butene. The ratios k_CPD+O/k_{trans-2-butene+O}= 2.34 and k_CPD+O/k_1-butene+O = 11.3 were obtained. Probable reaction mechanisms and intermediates are suggested.     

Study of the reactions of oxygen atoms with carbonothioicdichloride,carbonothioicdifluoride, and tetrafluoro-1,3-dithietane

The reactions of ground-state oxygen atoms with carbonothioicdichloride, carbonothioicdifluoride, and tetrafluoro-1,3-dithietane have been studied in a crossed molecular jet reactor in order to determine the initial reaction products and in a fast-flow reactor in order to determine their overall rate constants at temperatures between 250 and 500 K. These rate constants are??(O + C₂CS) =(3.09 ± 0.54) × 10^?11 exp(+115 ± 106 cal/mol/RT),??(O + F₂CS) = (1.22 ± 0.19) × 10^?11 exp(-747 ± 95 cal/mol/RT), and??(O + F₄C₂S₂) = (2.36 ± 0.52) × 10^?11 exp(-1700 ± 128 cal/mol/RT) cm³/molec˙sec. The detected reaction products and their rate constants indicate that the primary reaction mechanism is the electrophilic addition of the oxygen atom to the sulfur atom contained in the reactant molecule to form an energy-rich adduct which then decomposes by C-S bond cleavage.     

The relaxation of HCl(ν = 1) and DCl(ν = 1) by O atoms between 196 and 400 K

The rates of relaxation of HCl(ν = 1) and DCl(ν = 1) by atomic oxygen have been determined between 196 and 400 K using the laser induced vibrational fluorescence method. The values of the rate constants, κ_1,H and κ_1,D, can be matched quite well by Arrhenius expressions: κ_1,H = 6.2 × 10^?12 exp (?1.0₅ kcal mole^?1/RT) cm³ molecule^?1 s^?1 and κ_1,D = 2.9 × 10^?12 exp (?0.5 kcal mole^?1/RT) cm³ molecule^?1 s^?1. The most likely explanation of the absolute and relative magnitudes of these rate constants appears to be that relaxation occurs as a result of non-adiabatic vibronic transitions during collisions.     

Pyrolysis of vinylacetylene between 300 and 450°C

Vinylacetylene was pyrolyzed at 300–450°C in a packed and an unpacked static reactor with a pinhole bleed to a quadrupole mass spectrometer. The reactant and C₈H₈ products were monitored continuously during a reaction by mass spectrometry. In some runs, the products were also analyzed by gas chromatography after the run. In these runs CH₄, C₂H₆, C₃H₆, and C₂H₄ were also detected. The reaction for vinylacetylene removal and C₈H₈ formation is homogeneous, second order in reactant, and independent of the presence of a large excess of N₂ or He. However, C₈H₈ formation is about half-suppressed by the addition of the free-radical scavengers NO or O₂. The rate coefficient for total vinylacetylene removal is 1.7 × 10⁶ exp(?79 ± 13 kJ/mol RT) L/mol · s. The major reaction for C₄H₄ removal is polymerization. In addition four C₈H₈ isomers, carbon, and small hydrocarbons are formed. The three major C₈H₈ isomers are styrene, cyclooctatetraene (COT), and 1,5? dihydropentalene (DHP). The C₈H₈ compounds are formed by both molecular and free-radical processes in a second-order process with an overall k ? 3 × 10⁸ exp(?122 kJ/mol RT) L/mol · s (average of packed and unpacked cell results). The molecular process occurs with an overall k = 8.5 × 10⁷ exp (?118 kJ/mol RT) L/mol · s. The COT, DHP, and an unidentified isomer (d), are formed exclusively in molecular processes with respective rate coefficients of 4.4 × 10⁴ exp(?77 kJ/mol RT), 1.7 × 10⁵ exp(?89 kJ/mol RT), and 3.1 × 10⁹ exp(? 148 kJ/mol RT) L/mol · s. The styrene is formed both by a direct free-radical process and by isomerization of COT.     

Competitive unimolecular reactions at low pressures. The pyrolysis of cyclobutyl chloride

The thermal decomposition of cyclobutyl chloride has been investigated over the temperature range of 892–1150 K using the technique of very low-pressure pyrolysis (VLPP). The reaction proceeds via two competitive unimolecular channels, one to yield ethylene and vinyl chloride and the other to yield 1,3-butadiene and hydrogen chloride, with the latter being the major reaction under the experimental conditions. With the usual assumption that gas-wall collisions are «strong,» RRKM calculations, generalized to take into account two competing pathways, show that the experimental unimolecular rate constants are consistent with the high-pressure Arrhenius parameters given by log k₁(sec^?1) = (14.8 ± 0.3) ? (61.1 ± 1.0)/Θ for vinyl chloride formation and log k₂(sec^?1) = (13.6 ± 0.3) ? (55.7 ± 1.0)/Θ for 1,3-butadiene formation, where Θ = 2.303 RT kcal/mol. The A factors were assigned from previous high-pressure low-temperature data of other workers assuming a four-center transition state for 1,2-HCl elimination and a chlorine-bridged biradical transition state for vinyl chloride formation. The activation energies are in good agreement with the high-pressure results which were obtained with a conventional static system. The difference in critical energies is 4.6 kcal/mol.     

High‐temperature dissociation of ethyl radicals and ethyl iodide

The decomposition of ethyl iodide and subsequent dissociation of ethyl radicals have been investigated behind incident shock waves in a diaphragmless shock tube by laser‐schlieren (LS) densitometry (1150–1870 K, 55 ± 2 Torr and 123 ± 3 Torr). The LS density‐gradient profiles were simulated assuming that the initial dissociation of C₂H₅I proceeded by 87% C–I fission and 13% HI elimination. Excellent agreement was found between the simulations and experimental profiles. Rate coefficients for the C–I scission reaction were obtained and show strong falloff. Gorin model RRKM (Rice, Ramsperger, Kassel, and Marcus) calculations are in excellent agreement with the experimental data with E₀ = 55.0 kcal/mol, which is in very good agreement with recent thermochemical measurements and evaluations. However, E₀ is approximately 2.7 kcal/mol higher than previous estimates. First‐order rate coefficients for dissociation of C₂H₅I were determined to be k_55Torr = 8.65 × 10⁶⁸ T^?16.65 exp(?37,890/T) s^?1, k_123Torr = 3.01 × 10⁶⁹ T^?16.68 exp(?38,430/T) s^?1, k_∞ = 2.52 × 10¹⁹ T^?1.01 exp(?28,775/T) s^?1. Rates of dissociation for ethyl radicals were also obtained, and these are in very good agreement with theoretical predictions (Miller J. A. and Klippenstein S. J. Phys Chem Chem Phys 2004, 6, 1192–1202). The simulations show that at low temperatures ethyl radicals are consumed through recombination reactions as well as dissociation, whereas at high temperatures, dissociation dominates. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 433–443, 2012     

Temperature dependence of the reaction rate constants for O(3P) atoms with C2H4, C3H6 and NO(M = N2O), determined by a modulation technique

Rate constants for the reaction of O(³P) atoms with C₃H₄, C₃H₆ and NO(M = N₂O) have been measured over the temperature range 300–392°K using a modulation-phase shift technique. The Arrhenius expressions obtained are:C₂H₄, k₂ = 3.37 × 10⁹ exp[?(1270 ± 200)/RT]liter mole^?1 sec^?1,C₃H₆, k₂ = 2.08 × 10⁹ exp[?(0 ± 300)/RT]liter mole^?1 sec^?1,NO(M = N₂O), k₁ = 9.6 × 10⁹ exp[(900 ± 200/RT]liter² mole^?2 sec^?1.These temperature dependencies of k₂ are in good agreement with recent flash photolysis-resonance flourescence measurements, although lower than previous literature values.     

Germane decomposition: Kinetic and thermochemical data

Rate constants for the two stages of germane dissociation (GeH₄ → GeH₂ + H₂(I) and GeH₂ → Ge + H₂(II) have been derived from the studies of the chemiluminescence kinetics during germane dissociation in the presence of nitrous oxide behind shock waves at 1060–1300 K and the full density equal to ～10^?5 mol/cm³. Analysis in terms of the RRKM model gave the following expressions for the rate constants of these reactions in the high and low pressure limits: k _{1, ∞} = 2.0 × 10¹⁴exp(?208.0/RT) s^?1; k _{1, 0} = 1.7 × 10¹⁸(1000/T)^3.85exp(?208.0/RT) cm³/(mol s); and k _{2, 0} = 2.8 × 10¹⁵(1000/T)^1.32exp(?135.0/RT) cm³/(mol s). The results, in combination with the available enthalpies of formation of radical GeH₂, show that the back reaction for stage (I) has an energy barrier of about 66 kJ/mol.     

Kinetics and mechanism of atmospheric reactions of partially fluorinated alcohols

Gas-phase reactions typical of the Earth’s atmosphere have been studied for a number of partially fluorinated alcohols (PFAs). The rate constants of the reactions of CF₃CH₂OH, CH₂FCH₂OH, and CHF₂CH₂OH with fluorine atoms have been determined by the relative measurement method. The rate constant for CF₃CH₂OH has been measured in the temperature range 258–358 K (k = (3.4 ± 2.0) × 10¹³exp(?E/RT) cm³ mol^?1 s^?1, where E = ?(1.5 ± 1.3) kJ/mol). The rate constants for CH₂FCH₂OH and CHF₂CH₂OH have been determined at room temperature to be (8.3 ± 2.9) × 10¹³ (T = 295 K) and (6.4 ± 0.6) × 10¹³ (T = 296 K) cm³ mol^?1 s^?1, respectively. The rate constants of the reactions between dioxygen and primary radicals resulting from PFA + F reactions have been determined by the relative measurement method. The reaction between O₂ and the radicals of the general formula C₂H₂F₃O (CF₃CH₂? and CF₃?HOH) have been investigated in the temperature range 258–358 K to obtain k = (3.8 ± 2.0) × 10⁸exp(?E/RT) cm³ mol^?1 s^?1, where E = ?(10.2 ± 1.5) kJ/mol. For the reaction between O₂ and the radicals of the general formula C₂H₄FO (? HFCH₂O, CH₂F?HOH, and CH₂FCH₂?) at T = 258–358 K, k = (1.3 ± 0.6) × 10¹¹exp(?E/RT) cm³ mol^?1 s^?1, where E = ?(5.3 ± 1.4) kJ/mol. The rate constant of the reaction between O₂ and the radicals with the general formula C₂H₃F₂O (?F₂CH₂O, CHF₂?HOH, and CHF₂CH₂?) at T = 300 K is k = 1.32 × 10¹¹ cm³ mol^?1 s^?1. For the reaction between NO and the primary radicals with the general formula C₂H₂F₃O (CF₃CH₂? and CF₃?HOH), which result from the reaction CF₃CH₂OH + F, the rate constant at 298 K is k = 9.7 × 10⁹ cm³ mol^?1 s^?1. The experiments were carried out in a flow reactor, and the reaction mixture was analyzed mass-spectrometrically. A mechanism based on the results of our studies and on the literature data has been suggested for the atmospheric degradation of PFAs.     

The reaction of CF3Cl and H2 in shock waves

CF₃ClH₂ mixtures highly diluted with Ar were heated to 1400–1600 K behind reflected shock waves. The HCl emission was followed in order to determine the rate constant (k₁) of the reaction, CF₃Cl + M  CF3 + Cl + M, and k₁ = 2.1 × 10¹⁷ exp(?75000/RT) cm³ mol^?1 s^?1 was computed.     

Dissociation rate measurements in SO2 + Ar mixtures behind incident shock waves

Dissociation rates of SO₂ in SO₂ + Ar mixtures at 6%, 11%, 15% and 20% of SO₂ were measured behind incident shock waves over a temperature range 4000–6000 K at initial pressures 1.0 to 2.5 Torr. The recorded laser schlieren signals exhibited two exponentials, the faster one due to vibrational relaxation and the slower one due to dissociation. The initial dissociation rate was calculated from the value of the density gradient at the point of intersection of the two exponentials. A least-squares analysis of the experimental data yielded the following empirical relations: k_SO2Ar = 3.34 × 10¹⁵ exp(?107.6 kcal mole^?1/RT) cm³/mole s, k_SO2SO2 = 5.02 × 10¹⁴ exp(?66.6 kcal mole^?1 kcal mole^?1/RT) cm³/mole s.     

Rate constants for the reactions of conjugated olefins with NO2 in the gas phase

Gas-phase rate constants for the reaction of NO₂ with 16 conjugated olefins were determined at room temperature by either conventional methods for bimolecular processes or by competitive reactions. It was found that the rate constants for conjugated olefins were larger than those for simple mono-olefins by factors of 10³–10⁴. Temperature dependence studies reveal that the difference in the rate constants for the two types of reactions can primarily be attributed to differences in their activation energies: k_{1,3-cyclohexadiene} = 5.8 × 10^?14 exp[?(6.1 ± 1.6)/RT] cm³ molecule^?1 s^?1; k_cis-2-butene = 4.68 × 10^?14 exp(?11.2/RT) cm³ molecule^?1 s^?1 [2]. A linear free energy relationship between the reactions of OH and NO₂ with conjugated diolefins was observed.     

Quantum chemical/vRRKM study on the thermal decomposition of cyclopentadiene

Thermal decomposition of cyclopentadiene to c‐C₅H₅ (cyclopentadienyl radical) + H (1) and the reverse bimolecular reaction (?1) are studied quantum‐chemically at the G2M level of theory. The dissociation pathway has been mapped out following the minimum energy path on the potential energy surface (PES) calculated by the density functional UB3LYP/6‐311G(d,p) method. Using isodesmic reaction analysis, the standard enthalpy of formation for c‐C₅H₅ is found to be 62.5 ± 1.3 kcal mol^?1, and the c‐C₅H₅? H bond dissociation energy is estimated as D°₂₉₈(c‐C₅H₅? H) = 82.5 ± 0.9 kcal mol^?1, in excellent agreement with the recent experimental values. Variational rate constants are computed on the basis of a scaled UB3LYP dissociation potential that fits the isodesmic/experimental enthalpy of Reaction (1). At the high pressure limit, k₁^∞ = 1.55 × 10¹⁸ T^?0.8 exp(?42300/T) s^?1 and k_?1^∞ = 2.67 × 10¹⁴ exp(?245/T) cm³ mol^?1 s^?1. The fall‐off effects are evaluated by a weak collision master equation/RRKM analysis. Calculated T, P‐dependent rate constants are in very good agreement with the most reliable experimental measurements. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 139–151 2004     

Thermolysis of 3-methyl-3-(o-aryl)-1,2-dioxetanes: Activation parameters and chemiexcitation yields

3-Methyl-3-(o-tolyl)-1,2-dioxetane 1 and 3-methyl-4-(o-bromophenyl)-1,2-dioxetane 2 were synthesized in low yield by the β-bromo hydroperoxide method. The activation parameters were determined by the chemilumin-escence method (for 1 ΔG^? = 24.7 ± 0.3 kcal/mol, ΔH^? = 25.4, ΔS^? = + 1.9 e.u., k₆₀ = 3.4 × 10^?4s^?1; for 2 ΔG^? = 24.7 ± 0.4 kcal/mol, ΔH^? = 24.7, ΔS^? = 0.0 e.u., k₆₀ = 4.1 × 10^?4s^?1). Thermolysis of 1–2 directly produced high yields of excited triplets as expected for this type of dioxetane [triplet chemiexcitation yields (?⁷) for 1 0.03; for 2 0.02; the ?^T/?^S ratios were estimated to be approximately 200 for both compounds]. The effect of ortho-aryl substituents was inconsistent with electronic effects. The ortho substitution in 1–2 resulted in a marked increase in stability of the dioxetanes. The results are discussed in relation to a diradical-like mechanism.     

High temperature pyrolysis of methane in shock waves. Rates for dissociative recombination reactions of methyl radicals and for propyne formation reaction

The pyrolysis of 2% CH₄ and 5% CH₄ diluted with Ar was studied using both a single–pulse and time–resolved spectroscopic methods over the temperature range 1400–2200 K and pressure range 2.3–3.7 atm. The rate constant expressions for dissociative recombination reactions of methyl radicals, CH₃ + CH₃ → C₂H₅ + H and CH₃ + CH₃ → C₂H₄ + H₂, and for C₃H₄ formation reaction were investigated. The simulation results required considerably lower value than that reported for CH₃ + CH₃ → C₂H₄ + H₂. Propyne formation was interpreted well by reaction C₂H₂ + CH₃ → P-C₃H₄ + H with ?? = 6.2 × ¹⁰12 exp(?17 kcal/RT) ^cm3 mol^?1 s^?1.     

Thermal unimolecular isomerization of 1,4-dimethylbicyclo[2.2.0]hexane, 1,4-dimethylbicyclo[2.1.1]hexane,and 1,4-dimethylbicyclo[2.1.0]pentane

The thermal isomerization of the title compounds was studied in the vapor phase. Over the temperature range from 445.1 to 477.5°K, 1,4-dimethylbicyclo[2.2.0]hexane underwent a homogeneous unimolecular reaction to 2,5-dimethyl-1,5-hexadiene, the rate constants being represented by the equation: k = 1.86 × 10¹¹ exp (?31000 ± 1800/RT) sec^?1. Over the temperature range from 630.0 to 662.2°K, 1,4-dimethylbicyclo[2.1.1]-hexane also underwent a unimolecular isomerization to the same product, the rate constants being given by the equation: k = 8.91 × 10¹⁴ exp (?56000 ± 900/RT) sec^?1. The pyrolysis of 1,4-dimethylbicyclo[2.1.0]pentane gave 1,3-dimethylcyclopentene-1 and 2,4-dimethyl-1,4-pentadiene in the ratio of 9:1. The former reaction was influenced by surface effects but the latter was not. The rate constants for the formation of 2,4-dimethyl-1,4-pentadiene fitted the equation: k = 1.66 × 10¹⁷ exp (?57400 ± 3100/RT) sec^?1. The effect of the two methyl groups at the bridgehead positions in these molecules in influencing the rate of decomposition is discussed in terms of the non-bonded repulsive forces between the substituents.     

CF3Br?H2 reaction in shock waves

CF₃Br? H₂ mixtures highly diluted with Ar were studied by using a time-resolved IR-emission of HBr and a gas-chromatography for reaction products. The temperature range covered was 1000–1600 K and the total pressure behind the reflected shock waves used was 1.2–2.6 atm. CF₃H, C₂F₆, and C₂F₄ were produced and the yields of these products were determined as a function of temperature. The main product under our experimental conditions was CF₃H. The mechanism and the rate constants of CF₃Br? H₂ reaction at high temperatures were discussed. The experimental data was satisfactorily modeled using a 14-reaction mechanism. Reaction (5) played an important role in the formation of CF₃H together with reaction (4). The rate constant expression k₅ = 2.2 × 10¹³ exp(?12 kcal/RT) cm³ mol^?1 s^?1 gave the best agreement between the calculated and observed results. © 1993 John Wiley & Sons, Inc.     

Shock tube pyrolysis of pyrrole and kinetic modeling

The kinetics of pyrolysis of pyrrole dilute in argon have been studied in a single pulse shock tube, using capillary column GC, together with GC/MS and FTIR for product identification, over the temperature range 1200–1700 K, total pressures of 7.5–13.5 atm and nominal mixture compositions of pyrrole of 5000 and 700 ppm (nominal concentrations of 5 × 10^?7 and 7 × 10^?8 mol cm^?3). Time-resolved measurements of the rate of disappearance of pyrrole behind reflected shock waves have been made by absorption spectroscopy at 230 nm, corresponding to the lowest ¹π* ← ¹π transition of pyrrole at pressures of 20 atm and mixture compositions between 1000–2000 ppm pyrrole (1.7–3.0 × 10^?7 mol cm^?3) over the temperature range of 1300 to 1700 K. At the lower end of the studied temperature range, the isomers of pyrrole, allyl cyanide and cis- and trans-crotononitrile, were the principal products, together with hydrogen cyanide and propyne/allene. At elevated temperatures, acetylene, acetonitrile, cyanoacetylene, and hydrogen became important products. The rate of overall disappearance of pyrrole, as measured by absorption spectrometry, was found to be first order in pyrrole concentration, with a rate constant k_dis(pyrrole) = 10^14.1±0.7 exp(?74.1 ± 3.0 kcal mol^?1/RT) s^?1 between 1350–1600 K and at a pressure of 20 atm. First order dependence of pyrrole decomposition and major product formation was also observed in the single pulse experiments over the range of mixture compositions studied. A 75-step reaction model is presented and shown to substantially fit the observed temperature profiles of the major product species and the reactant profile. In the model the initiation reaction is postulated to be the reversible formation of pyrrolenine, (2H-pyrrole). Pyrrolenine can undergo ring scission at the C2? N bond forming a biradical which can rearrange to form allyl cyanide and crotononitrile or undergo decomposition to form HCN and C₃H₄ or acetylene and a precursor of acetonitrile. The model predicts an overall rate of disappearance of pyrrole in agreement with the experimental measurements.