Comparison of immunoassay and gas chromatography-mass spectrometry for measurement of polycyclic aromatic hydrocarbons in contaminated soil

Polycyclic aromatic hydrocarbons (PAHs) are frequently encountered in the environment and may pose health concerns due to their carcinogenicity. A commercial enzyme-linked immunosorbent assay (ELISA), was evaluated as a screening method for monitoring PAHs at contaminated sites. The ELISA was a carcinogenic PAH (C-PAH) RaPID assay testing kit that cross-reacts with several PAHs and utilizes benzo[a]pyrene (BaP) as a calibrator. Soil samples were extracted with 50% acetone in dichloromethane (DCM) for analysis by ELISA and gas chromatography-mass spectrometry (GC-MS). The overall method precision was within ±30% for ELISA and within ±20% for GC-MS. Recovery data for spiked soils ranged from 46 to 140% for BaP as determined by ELISA. Recoveries data of the GC-MS surrogate standards, 2-fluorobiphenyl and chrysene, were greater than 70%. The GC-MS procedure detected a total of 19 priority PAHs (2-6-ring PAHs) including seven probable human carcinogens (4-6-ring B2-PAHs). The ELISA results were compared to GC-MS summation results for the total 19 target PAHs as well as for the subset of the seven B2-PAH compounds. For all soil samples, the PAH concentrations derived from ELISA were greater than the sum of B2-PAH concentrations obtained by GC-MS. ELISA determinations were also frequently greater than the results obtained by GC-MS for the total 19 PAH compounds. This discrepancy can be expected, since the ELISA is a screening assay for the detection of several related PAHs while the GC-MS procedure detects priority PAH compounds. Thus, only a subset of PAHs (e.g. 19 PAHs) in the soil samples were measured by GC-MS while additional PAHs, including alkylated PAHs, and PAH derivatives have been demonstrated to be cross-reactive in the C-PAH ELISA. Results of paired tests show that the PAH data from ELISA and GC-MS methods are significantly different (P<0.001), but highly correlated. The ELISA data had a strong positive relationship with the GC-MS summation data for the B2-PAHs as well as for the 19 PAHs targeted by the GC-MS method. Results indicate that the ELISA may be useful as a broad screen for monitoring PAHs in environmental samples.     

Comparison of solid phase extraction, saponification and gel permeation chromatography for the clean-up of microwave-assisted biological extracts in the analysis of polycyclic aromatic hydrocarbons

The feasibility of different clean-up procedures was studied for the determination of polycyclic aromatic hydrocarbons (PAHs) in biota samples such as oysters, mussels and fish liver. In this sense, once the samples were extracted--essentially with acetone and in a microwave system--and before they could be analysed by gas chromatography-mass spectrometry (GC-MS), three different approaches were studied for the clean-up step: solid phase extraction (SPE), microwave-assisted saponification (MAS) and gel permeation chromatography (GPC). The main aim of this work was to maximise the recoveries of PAHs and to minimise the presence of interfering compounds in the last extract. In the case of SPE, Florisil cartridges of 1, 2 and 5 g, and silica cartridges of 5 g were studied. In that case, and with oysters and mussels, microwave-assisted extraction and 5 g Florisil cartridges provided good results. In addition, the concentrations obtained for Standard Reference Material (SRM) NIST 2977 (mussel tissue) were in good agreement with the certified values. In the case of microwave-assisted saponification, the extracts were not as clean as those obtained with 5 g Florisil and this fact lead to overestimate the concentration of the heaviest PAHs. Finally, the cleanest extracts were obtained by GPC. The method was successfully applied to mussels, oysters and hake liver, and the results obtained for NIST 2977 (mussel tissue) were within the confidence interval of the certified reference material for most of the certified analytes.     

Identification and characterization of polycyclic aromatic hydrocarbons in coking wastewater sludge

GC‐MS analysis was performed on the coking sludge from a coking wastewater treatment plant (WWTP) to allow detailed chemical characterization of polycyclic aromatic hydrocarbons (PAHs). The identification and characterization of the isomers of PAHs was based on a positive match of mass spectral data of their isomers with mass spectra databases or based on a comparison of electron impact ionization mass spectra and retention times of target compounds with those reference compounds. In total, 160 PAH compounds including numerous N‐, O‐, S‐, OH‐, and Cl‐containing derivatives were positively identified for the first time. Quantitative analysis of target compounds was performed in the selected ion‐monitoring mode using the internal standard method. The total concentrations of selected compounds in the coking sludge samples from the anaerobic tank, aerobic tank, hydrolytic tank, and secondary clarifier of the WWTP ranged from 1690 ± 585 to 6690 ± 522 mg/kg, which were much higher than those in other industrial and municipal sludges. PAHs with four and five rings were found to be the dominant compounds, and diagnostic ratios of these compounds suggested that they had the characteristics of coal combustion and pyrolysis.     

Application of micro-scale sealed vessel thermal desorption-gas chromatography-mass spectrometry for the organic analysis of airborne particulate matter: linearity, reproducibility and quantification

Micro-scale sealed vessel thermal desorption-gas chromatography-mass spectrometry (MSSV-TD-GC-MS) has been applied to the analysis of airborne particulate matter using the US NIST Standard Reference Material (SRM1649a) urban dust. We make qualitative comparisons with open system desorption and illustrate that caution should be used when using the technique without an open system comparison. We report linear responses over the same particulate mass range (1-5 mg) and good reproducibility [SD< or =0.62 mg kg(-1) (< or = 11%)]. We show linearity for a series of 10 n-alkanes and 10 polycyclic aromatic hydrocarbons (PAHs) in the SRM. The technique is also shown to be quantifiable (PAH concentrations typically 4-6 mg kg(-1)).     

Quantification of 21 metabolites of methylnaphthalenes and polycyclic aromatic hydrocarbons in human urine

Polycyclic aromatic hydrocarbons (PAHs) and their alkylated derivatives, such as methylnaphthalenes (MeNs), are harmful pollutants ubiquitously present in the environment. Exposure to PAHs has been linked to a variety of adverse health effects and outcomes, including cancer. Alkyl PAHs have been proposed as petrogenic source indicators because of their relatively high abundance in unburned petroleum products. We report a method to quantify 11 urinary methylnaphthols (Me-OHNs), metabolites of 1- and 2-methylnaphthalenes, and 10 monohydroxy PAH metabolites (OH-PAHs), using automated liquid-liquid extraction and isotope dilution gas chromatography tandem mass spectrometry (GC-MS/MS). After spiking urine (1 mL) with ¹³C-labeled internal standards, the conjugated target analytes were hydrolyzed enzymatically in the presence of ascorbic acid. Then, their free species were preconcentrated into 20 % toluene in pentane, derivatized and quantified by GC-MS/MS. The 11 Me-OHNs eluted as 6 distinct chromatographic peaks, each representing 1???3 isomers. Method detection limits were 1.0? 41 pg/mL and the coefficients of variation in quality control materials were 4.7???19 %. The method was used to analyze two National Institute of Standards and Technology’s Standard Reference Materials® and samples from 30 smokers and 30 non-smokers. Geometric mean concentrations were on average 37 (Me-OHNs) and 9.0 (OH-PAHs) fold higher in smokers than in non-smokers. These findings support the usefulness of Me-OHNs as potential biomarkers of non-occupational exposure to MeNs and sources containing MeNs.

Ultrasound-assisted extraction and on-line LC–GC–MS for determination of polycyclic aromatic hydrocarbons (PAH) in urban dust and diesel particulate matter

A method has been developed for determination of polycyclic aromatic hydrocarbons (PAH) in particulate matter from ambient air and diesel exhaust emissions. It is reproducible and accurate and, compared with similar methods for analysis of individual PAH components in complex matrices, it is relatively fast and simple. Single PAH components can be determined in samples of particulate matter from ambient air and diesel exhaust emissions with LOD of approximately 1 pg/sample. Further, sample throughput is high, because more than 20 samples can be extracted and prepared for analysis in one working (8-h) day. The particulate matter is subjected to ultrasound-assisted extraction, a technique that is shown to extract PAH from particulate material with efficiencies fully comparable with those of Soxhlet extraction. An aliphatic/PAH-enriched fraction is obtained by solid-phase extraction before isolation, separation, and identification/quantification of PAH by on-line liquid chromatography–gas chromatography–mass spectrometry. The method was validated by analysis of US National Institute of Standards and Technology (NIST) Standard Reference Materials (SRM) 1649a, Urban Dust, and 2975, Diesel Particulate Matter. Results from the method are in good agreement with the NIST-certified PAH concentrations and with NIST reference PAH concentrations.     

Analysis of carcinogenic polycyclic aromatic hydrocarbons in complex environmental mixtures by LC-APPI-MS/MS

Here we developed a highly sensitive, fast and reliable liquid chromatography tandem mass spectrometry (LC-MS/MS) method for the detection and analysis of 16 different polycyclic aromatic hydrocarbons (PAHs) and nitro-PAHs that have been identified as carcinogens and classified according to their biological potency. Comparison to standard analysis procedures based on gas chromatography-mass spectrometry (GC-MS) instrumentation demonstrated an improved easiness of sample preparation and sensitivity of detection achieved with the new LC-MS/MS method employing an atmospheric pressure photoionization (APPI) source attached to an API 4000 mass spectrometer (LC-APPI-MS/MS). The favorable outcome could be confirmed by analyzing complex mixtures such as certain Standard Reference Materials (SRMs) obtained from the National Institute of Standards & Technology (NIST), i.e., SRM 1975 and SRM 2975, and several diesel exhaust soots provided by the German automobile industry. Certified concentrations of individual analytes provided by NIST not only could be confirmed, but additional extremely potent carcinogens such as several isomeric hexacyclic dibenzopyrenes (DBPs), 5-methylchrysene (5-MC), and others have been detected in these crude samples in a concentration range down to below 1 ng g(-1) raw material.     

On the semi-quantification of polycyclic aromatic hydrocarbons in contaminated soil by an enzyme-linked immunosorbent assay kit

Polycyclic aromatic hydrocarbons (PAHs) are of environmental concern, for instance when found in contaminated soils at sites where industrial activities have occurred. For efficient screening of such soils, the commercially available enzyme-linked immunosorbent assay (ELISA) kit, the PAH RIS^c® soil test, can be used. However, the site-specific performance may vary due to differences in soil properties and contamination profiles. Hence, in this study we have examined various contributing factors to the total ELISA measurements uncertainties. These factors include contributions from co-extracted (non-target) compounds, the extraction efficiency and differences in cross-reactivity among the target analytes. Reference values were obtained through pressurized liquid extraction (PLE) and gas chromatography coupled to mass spectrometry (GC-MS) analysis. The results showed that the ELISA does not seem to respond to non-target compounds in the soil extracts to any large extent. Furthermore, high molecular weight PAHs were found to be more efficiently extracted with PLE than with methanol agitation, which is used for ELISA. If this, and the cross-reactivity of the individual PAHs, were taken into consideration, the ELISA and GC-MS results were in good agreement.     

Investigation of PAH and other hazardous contaminant occurrence in recycled tyre rubber surfaces. Case-study: restaurant playground in an indoor shopping centre

The objective of this case study was to investigate the presence of polycyclic aromatic hydrocarbons (PAHs) and other hazardous organic chemicals in a recycled tyre playground surface (in an indoor restaurant of a shopping centre with limited ventilation). This study also aimed at underlining both the volatilisation of these compounds in the vapour phase above the sample and the partial leaching of contaminants from the playground surface to the runoff and cleaning water put in contact with the sample. Playground samples were extracted with ethyl acetate using ultrasonic energy followed by GC-MS analysis. In addition, the same samples were analysed by HS-SPME to study the volatilisation and the transfer of those organic compounds. The analysis confirmed the presence of a large number of hazardous substances. Thus, 14 of the 16 studied PAHs were identified in the extracts (including the considered most toxic PAH, benzo[a]pyrene) and nine of them were also detected in the vapour phase. Besides, nine PAHs were found in the runoff/cleaning water, yielding a total PAH concentration at the ppm level. The presence and the high concentrations of these chemical compounds in playgrounds should be a matter of concern owing to their high toxicity.     

Analysis of polycyclic aromatic hydrocarbons by liquid chromatography/tandem mass spectrometry using atmospheric pressure chemical ionization or electrospray ionization with tropylium post-column derivatization

Polycyclic aromatic hydrocarbons (PAHs) with four to six rings are potent carcinogens. This study analyzed ten of the sixteen US EPA priority PAHs using reversed-phase liquid chromatography/tandem mass spectrometry (LC/MS/MS) in selected reaction monitoring mode with two ionization sources: positive atmospheric pressure chemical ionization (APCI+) or positive elecrtrospray ionization (ESI+) with tropylium post-column derivatization. Several factors were investigated, including mobile phases, stationary phases of columns and chromatographic temperature, to determine how optimal separation and sensitivity might be achieved. Methanol used as an organic mobile phase provided better sensitivities for most PAHs than acetonitrile, although some PAHs co-eluted. Acidic buffers did not increase analyte signals. Use of Restek Pinnacle II PAH columns (250 x 4.6 mm or 250 x 2.1 mm, 5 microm) with water/acetonitrile gradient at 27 degrees C made possible a good separation of the ten analytes. [M]+. were the best precursor ions in both APCI and ESI, although fluoranthene could not be detected in ESI mode when tropylium post-column derivatization was performed. [M-28]+ and [M-52]+ were the major product ions of PAHs after collision-induced dissociation, a result of neutral losses of C(2)H(4) and (C(2)H(2))(2), respectively. Chromatographic separation for PAH isomers was crucial because the mass spectra were so similar that even MS/MS could not distinguish them from each other. The recoveries of sample preparations of PAHs spiked onto air-sampling filters ranged between 77.5 and 106% with relative standard deviations between 1.1 and 15.9%. This method was validated by analyzing NIST SRM 1649a (urban dust), producing results comparable with the certified PAH concentrations. The detection limits using APCI and ESI interfaces, defined as three times the noise levels, ranged between 0.23 and 0.83 ng and between 0.16 and 0.84 ng of on-column injection, respectively.     

Gas chromatographic-mass spectrometric method for polycyclic aromatic hydrocarbon analysis in plant biota

Using gas chromatography-mass spectrometry, a new method was developed for the identification and the quantification of polycyclic aromatic hydrocarbons (PAHs) in plants. This method was particularly optimised for PAH analyses in marine plants such as the halophytic species, Salicornia fragilis Ball et Tutin. The saponification of samples and their clean up by Florisil solid-phase extraction succeeded in eliminating pigments and natural compounds, which may interfere with GC-MS analysis. Moreover, a good recovery of the PAHs studied was obtained with percentages ranging from 88 to 116%. Application to the determination of PAH in a wide range of coastal halophytic plants is presented and validated the efficiency, the accuracy and the reproducibility of this method.     

Dibenzopyrenes,other PAHs with molecular weight 302, and selected carcinogenic PAHs seldom determined: identification and one-year quantification in urban air

The unambiguous identification in environmental samples of the potent carcinogen dibenzo[a,l]pyrene (DBalP) and the other DBPs (DBaeP, DBaiP, DBahP), whose evidence of carcinogenicity was recently re-evaluated by the International Agency for Research on Cancer (IARC), is an analytical challenge. This is attributed to their low concentrations in the environment and to the co-presence of several 302?MW isomers. In this study the four DBPs were identified in air, together with further four isomers with MW 302, based on an overall evaluation of five acceptance criteria. Their annual mean concentrations were quantified, for the first time to our knowledge. Thirteen other isomers were tentatively identified by comparison with previously published gas chromatographic profiles. The determinations were performed on PM10 samples collected every sixth day at a site in Rome, solvent extracted and analysed using GC/LRMS. The primary objective was to determine the mean DBP concentrations the population may be exposed to, and their consequent carcinogenic risks relative to benzo[a]pyrene (BaP) taken as a reference polycyclic aromatic hydrocarbon (PAH). The mean concentrations of DBalP, DBaeP, DBaiP and DBahP were, respectively, 0.014, 0.07, 0.02 and 0.01?ng?m^?3 (BaP: 0.65?ng?m^?3). Based on the available toxicity equivalence factors, DBalP contributed the carcinogenic risk of the PAH mixture by a factor of 2 relative to the risk attributable to BaP. DBaeP, DBahP and DBaiP contributed by, respectively, 11%, 1% and 0.3% of BaP. The instrumental conditions used to determine the 302?MW isomers allowed to unambiguously identify and to quantify other PAHs, ‘possibly carcinogenic’ to humans according to IARC, whose atmospheric concentrations reported in literature are scarce or missing: benzo[c]phenanthrene, 5-methylchrysene and benzo[j]fluoranthene (the latter being baseline resolved from isomers b and k). Finally, for completeness of information on PAHs recently upgraded by IARC to ‘possibly carcinogenic’, the concentrations of cyclopenta[cd]pyrene are reported.     

Determination of 252–302 Da and tentative identification of 316–376 Da polycyclic aromatic hydrocarbons in Standard Reference Materials 1649a Urban Dust and 1650b and 2975 Diesel Particulate Matter by accelerated solvent extraction–HPLC-GC-MS

We have assessed and compared the extraction recoveries of polycyclic aromatic hydrocarbons (PAHs) with molecular weights of 252, 276, 278, 300 and 302 from diesel particulate matter (PM) and urban air particles using ultrasonically assisted extraction and accelerated solvent extraction methods, and evaluated the effects of sample and treatment parameters. The results show that accelerated solvent extraction can extract PAHs more efficiently from diesel PM than ultrasonically assisted extraction. They also show that PAHs are more difficult to extract from diesel PM than from urban air particles. Using toluene and maximum instrumental settings (200 °C, 3,000 psi and five extraction cycles) with 30-min static extraction times > 85% of the analytes were estimated to be extracted from the diesel particles, but four extraction cycles with just 5-min static extraction times under these conditions seem to be sufficient to extract > 95% of the analytes from the urban air particles. The accelerated solvent extraction method was validated using the Standard Reference Materials (SRM) 1649a, Urban Dust, and SRM 2975 and SRM 1650a, Diesel Particulate Matter, from the US National Institute of Standards and Technology (NIST). PAH concentrations determined by on-line high-performance liquid chromatography–gas chromatography–mass spectrometry (HPLC-GC-MS) following the developed accelerated solvent extraction method were generally higher than the certified and reference NIST values and concentrations reported in the literature (e.g. the estimated concentration of benzo[a]pyrene in SRM 2975 was 15-fold higher than the NIST-certified value), probably because the extraction recoveries were higher than in previous studies. The developed accelerated solvent extraction method was used to analyse high molecular (HMW) weight PAHs (MW > 302) in the investigated SRMs, and more than 170 (SRM 1649a), 80 (SRM 1650b) and 60 (SRM 2975) potential high molecular weight PAHs were tentatively identified in them, with molecular weights (depending on the SRM sample analysed) of 316, 326, 328, 340, 342, 350, 352, 366, 374 and 376. This is, to our knowledge, the first study to tentatively report PAHs with molecular weights of 316, 326, 328, 342, 350, 352, 366 and 376 in diesel particulate matter. GC-MS chromatograms obtained in selected ion monitoring mode (extracted ions for the abovementioned m/z) and full-scan mass spectra of tentatively identified high molecular weight PAHs are shown in the Electronic supplementary material. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Determination of polycyclic aromatic hydrocarbons in water by solid-phase microextraction-gas chromatography-mass spectrometry

A solid-phase microextraction (SPME)-gas chromatography (GC)-mass spectrometry (MS) analytical method for the simultaneous separation and determination of 16 polycyclic aromatic hydrocarbons (PAHs) from aqueous samples has been developed, based on the sorption of target analytes on a selectively sorptive fibre and subsequent desorption of analytes directly into GC-MS. The influence of various parameters on PAH extraction efficiency by SPME was thoroughly studied. Results show that the fibre exposure time and the use of agitation during exposure are critical in enhancing SPME performance. The presence of colloidal organic matter (as simulated by humic acid) in water samples is shown to significantly reduce the extraction efficiency, suggesting that SPME primarily extracts the truly dissolved compounds. This offers the significant advantage of allowing the differentiation between freely available dissolved compounds and those associated with humic material and potentially biologically unavailable. The method showed good linearity up to 10 μg/l. The reproducibility of the measurements expressed as relative standard deviation (R.S.D.) was generally <20%. The method developed was then applied to extract PAHs from sediment porewater samples collected from the Mersey Estuary, UK. Total PAH concentrations in porewater were found to vary between 95 and 742 ng/l with two to four ring PAHs predominating. Results suggest that SPME has the potential to accurately determine the dissolved concentrations of PAHs in sediment porewater.     

Screening and determination of polycyclic aromatic hydrocarbons in seafoods using QuEChERS-based extraction and high-performance liquid chromatography with fluorescence detection

A rapid, sensitive, and accurate method for the screening and determination of polycyclic aromatic hydrocarbons (PAHs) in edible seafood is described. The method uses quick, easy, cheap, effective, rugged, and safe (QuEChERS)-based extraction and HPLC with fluorescence detection (FLD). The method was developed and validated in response to the massive Deepwater Horizon oil spill in the Gulf of Mexico. Rapid and highly sensitive PAH screening methods are critical tools needed for oil spill response; they help to assess when seafood is safe for harvesting and consumption. Sample preparation involves SPE of edible seafood portions with acetonitrile, followed by the addition of salts to induce water partitioning. After centrifugation, a portion of the acetonitrile layer is filtered prior to analysis via HPLC-FLD. The chromatographic method uses a polymeric C18 stationary phase designed for PAH analysis with gradient elution, and it resolves 15 U.S. Environmental Protection Agency priority parent PAHs in fewer than 20 min. The procedure was validated in three laboratories for the parent PAHs using spike recovery experiments at PAH fortification levels ranging from 25 to 10 000 microg/kg in oysters, shrimp, crab, and finfish, with recoveries ranging from 78 to 99%. Additional validation was conducted for a series of alkylated homologs of naphthalene, dibenzothiophene, and phenanthrene, with recoveries ranging from 87 to 128%. Method accuracy was further assessed based on analysis of National Institute of Standards and Technology Standard Reference Material 1974b. The method provides method detection limits in the sub to low ppb (microg/kg) range, and practical LOQs in the low ppb (microg/kg) range for most of the PAH compounds studied.     

Environmental and food analysis by desorption atmospheric pressure photoionization‐mass spectrometry

Desorption atmospheric pressure photoionization‐mass spectrometry (DAPPI‐MS) is a versatile surface analysis technique for a wide range of analytes, especially for neutral and non‐polar analytes. Here, a set of analytes typically found in environmental or food samples was analyzed by DAPPI‐MS. The set included five polyaromatic hydrocarbons (PAHs), one N‐PAH, one brominated flame retardant, and nine pesticides, which were studied with three different spray solvents: acetone and toluene in positive ion mode, and anisole in negative ion mode. The analytes showed [M + H]⁺, M^+?, and [M–H]^? ions as well as fragmentation and substitution products. Detection limits for the studied compounds ranged from 30 pg to 1 ng (from 0.14 to 5.6 pmol). To demonstrate the feasibility of the use of DAPPI‐MS two authentic samples – a circuit board and orange peel – and a spiked soil sample were analyzed. Tetrabromobisphenol A, imazalil, and PAHs were observed from the three above‐mentioned samples, respectively. The method is best suited for rapid screening analysis of environmental or food samples. Copyright © 2010 John Wiley & Sons, Ltd.     

Sources and distribution of polycyclic aromatic hydrocarbons (PAHs) in sediments from the Mar Piccolo of Taranto,Ionian Sea,southern Italy

The concentrations of 17 parent PAHs, with molecular weight from 128 to 278 Daltons, were determined in surface sediments from the Mar Piccolo of Taranto. The analytical results were compared with the published results for other coastal areas of the Mediterranean Sea. The analyses were performed by gas chromatography coupled to mass spectrometry (GC-MS). Total PAH content in sediments ranged from 380 to 12750 ng g(-1) dry weight. The levels of the PAHs was higher than the one reported for sediments of the Adriatic Sea and Cretan Sea and of the same order of magnitude of the one known for coastal areas of the western and the eastern Mediterranean Sea. The PAHs distribution showed similar patterns in all sediments analyzed, with compounds with three or more rings. These patterns of distribution and the ratios among low molecular weight PAHs/high molecular weight PAHs, phenanthrene/anthracene and fluoranthene/pyrene indicated that pyrogenic inputs are the main source of these compounds in the Mar Piccolo basin. Based on the comparison of both the individual and the total PAH concentrations with proposed sediment quality guidelines, the acute biological effects on the marine organisms should be negligible.     

Rapid method for the determination of polycyclic aromatic hydrocarbons in agricultural soils by sonication-assisted extraction in small columns

A rapid method has been developed for the determination of 16 polycyclic aromatic hydrocarbons (PAHs) in soil based on their sonication-assisted extraction in small columns (SAESC) with a low volume of ethyl acetate and subsequent quantitation and identification by GC with electron impact mass spectrometric detection in the SIM mode (GC-MS-SIM). Spiked blank soil extracts were used as standards to counteract the matrix effect observed in the chromatographic determination. PAHs were confirmed at trace level by their retention times, their qualifier and target ions, and their qualifier/target abundance ratios. Recovery studies were performed at 0.5, 1.0, 5.0, and 10 microg/kg fortification levels for each PAH, and the recoveries obtained ranged from 91.2 to 99.8% with RSDs between 0.4 and 9.3%. The detection limits of the method ranged from 0.03 to 0.3 microg/kg for the different PAHs studied. The developed method is linear over the range assayed, 1-100 microg/L with determination coefficients higher than 0.996. PAH levels were determined using this method in soil samples taken from different agricultural areas of Spain. In general, PAH concentrations were low and the most frequently occurring PAHs were naphthalene, pyrene, phenanthrene, and fluoranthene.     

A multi-dimensional high performance liquid chromatographic method for fingerprinting polycyclic aromatic hydrocarbons and their alkyl-homologs in the heavy gas oil fraction of Alaskan North Slope crude

We report an offline multi-dimensional high performance liquid chromatography (HPLC) technique for the group separation and analysis of PAHs in a heavy gas oil fraction (boiling range 287-481 degrees C). Waxes present in the heavy gas oil fraction were precipitated using cold acetone at -20 degrees C. Recovery studies showed that the extract contained 93% (+/-1%; n=3) of the PAHs that were originally present while the wax residue contained only 6% (+/-0.5%; n=3). PAHs present in the extract were fractionated, based on number of rings, into five fractions using a semi-preparative silica column (normal-phase HPLC). These fractions were analyzed using reverse-phase HPLC (RP-HPLC) coupled to a diode array detector (DAD). The method separated alkyl and un-substituted PAHs on two reverse-phase columns in series using an acetonitrile/water mobile phase. UV spectra of the chromatographic peaks were used to differentiate among PAH groups. Further characterization of PAHs within a given group to determine the substituent alkyl carbon number used retention time matching with a suite of alkyl-PAH standards. Naphthalene, dibenzothiophene, phenanthrene and fluorene and their C1-C4 alkyl isomers were quantified. The concentrations of these compounds obtained using the current method were compared with that of a GC-MS analysis obtained from an independent oil chemistry laboratory.