Mechanical degradation of polypropylene solutions under large pressure drops

The degradation of polypropylene (PP), dissolved in n‐alkanes at high temperatures and pressures, during the solution discharge to ambient conditions was experimentally studied. Molecular weight distributions (MWD) of the solubilized PP were measured by gel permeation chromatography. The MWD curves of PP obtained after discharge of the polymer solution shift to the low molecular weight side of the distribution and the polydispersity is reduced. In this work, a systematic study on the discharge products was performed to elucidate the degradation mechanism and the effects of temperature and concentration on this phenomenon. Initially, pure polymers, PP and polystyrene (PS) were studied varying the solution temperature. In a second stage, the effect of polymer concentration on chain scission was assessed using experiments on physical blends of PP/PS. In all cases, thermal and oxidative degradation were previously analyzed. Mechanical degradation was found to be the main chain scission mechanism. A negative linear functionality of the chain scission was found in both temperature and polymer concentration. To analyze the relationship between polymer degradation and molecular weight, the chain scission distribution function was calculated. On this basis, a critical molecular weight for the beginning of chain scission was obtained. This value is a function of temperature but remains constant with concentration. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 455–465, 2007     

Thermal oxidative degradation of poly-lactic acid

The study of molecular weight and rate of change of molecular weight during thermal degradation of PLA suggests the random nature of chain scission with activation energy of 28 kcal/mol. The rate of weight loss indicates the formation of the volatiles by chain end initiation. The melting temperature of the polymer initially decreases and afterwards increases with increase in time of heating due to chain stiffening.     

Degradation of polycaprolactone in supercritical fluids

The degradation of polycaprolactone (PCL) was studied in subcritical and supercritical toluene from 250 to 375 °C at 50 bar. The degradation was also investigated in various solvents like ethylbenzene, o-xylene and benzene at 325 °C and 50 bar. The effect of pressure on degradation was also evaluated at 325 °C at various pressures (35, 50 and 80 bar). The variation of molecular weight with time was analyzed using gel permeation chromatography and modeled using continuous distribution kinetics to evaluate the degradation rate coefficients. PCL degrades by random chain scission in subcritical conditions (250-300 °C) and by chain end scission (325-375 °C) in supercritical conditions in toluene. The degradation of PCL in other solvents at 325 °C was by chain end scission under both subcritical and supercritical conditions indicating that the mode of scission depends on the temperature and not on the supercriticality of the solvent. The thermogravimetric analysis of PCL was investigated at various heating rates (2-24 °C/min) and the activation energy was determined using Friedman, Ozawa and Kissinger methods. It was shown that PCL degrades by random scission at lower temperatures and by chain end scission at higher temperatures again indicating that the mode of scission is dependent on the temperature.     

Photooxidative and pyrolytic degradation of methyl methacrylate-alkyl acrylate copolymers

Different compositions of poly(methyl methacrylate-co-methyl acrylate) (PMMAMA), poly(methyl methacrylate-co-ethyl acrylate) (PMMAEA) and poly(methyl methacrylate-co-butyl acrylate) (PMMABA) copolymers were synthesized and characterized. The photocatalytic oxidative degradation of all these copolymers were studied in presence of two different catalysts namely Degussa P-25 and combustion synthesized titania using azobis-iso-butyronitrile and benzoyl peroxide as oxidizers. Gel permeation chromatography (GPC) was used to determine the molecular weight distribution of the samples as a function of time. The GPC chromatogram indicated that the photocatalytic oxidative degradation of all these copolymers proceeds by both random and chain end scission. Continuous distribution kinetics was used to develop a model for photocatalytic oxidative degradation considering both random and specific end scission. The degradation rate coefficients were determined by fitting the experimental data with the model. The degradation rate coefficients of the copolymers decreased with increase in the percentage of alkyl acrylate in the copolymer. This indicates that the photocatalytic oxidative stability of the copolymers increased with increasing percentage of alkyl acrylate. From the degradation rate coefficients, it was observed that the photocatalytic oxidative stability follows the order PMMABA > PMMAEA > PMMAMA. The thermal degradation of the copolymers was studied by using thermogravimetric analysis (TGA). The normalized weight loss and differential fractional weight loss profiles indicated that the thermal stability of the copolymer increases with an increase in the percentage of alkyl acrylate and the thermal stability of poly(methyl methacrylate-co-alkyl acrylate)s follows the order PMMAMA > PMMAEA > PMMABA. The observed contrast in the order of photostability and thermal stability of the copolymers was attributed to different mechanisms involved for the scission of polymer chain and formation of different products in both the processes.     

The thermal degradation of polymethacrylonitrile with different end groups

Polymethacrylonitrile (PMAN) was prepared by bulk, solution and precipitation polymerization. The thermal stability of the polymer, which is affected by the structure of the chain end groups, was studied by non-isothermal thermogravimetry (TG). On the basis of the differential TG curves of samples prepared by polymerization in the presence of chlorinated solvents, it may be concluded that, in addition to end-chain and random main chain scission initiated depolymerization, hydrogen chloride evolution also occurs during the thermal degradation of PMAN.     

Mechanically induced scission and subsequent thermal remending of perfluorocyclobutane polymers

Perfluorocyclobutane (PFCB) polymer solutions were subjected to pulsed ultrasound, leading to mechanically induced chain scission and molecular weight degradation. (19)F NMR revealed that the new, mechanically generated end groups are trifluorovinyl ethers formed by cycloreversion of the PFCB groups, a process that differs from thermal degradation pathways. One consequence of the mechanochemical process is that the trifluorovinyl ether end groups can be remended simply by subjecting the polymer solution to the original polymerization conditions, that is, heating to >150 °C. Stereochemical changes in the PFCBs, in combination with radical trapping experiments, indicate that PFCB scission proceeds via a stepwise mechanism with a 1,4-diradical intermediate, offering a potential mechanism for localized functionalization and cross-linking in regions of high stress.     

Gel permeation chromatography studies of chain scission and cross-linking during photo-oxidation of atactic polystyrene below and at tg

Photo-oxidative degradation of polystyrene in the form of film 20 μm thick was carried out in air using u.v. light of 254 nm at room temperature and at temperatures up to T_g. GPC was used to study changes of molecular weight distribution during the process. The GPC results were analysed using equations for an initially most probable distribution and non-uniform energy dissipation; the quantum yield values of chain scission and cross-linking of polystyrene during degradation were calculated. Initially, degradation progressed at high rate, connected with consumption of oxygen dissolved in the film. The slower subsequent degradation was connected with consumption of oxygen supplied during the reaction. An appreciable increase in the quantum yields for chain scission and cross-linking was observed just below and at T_g for the initial stage of photo-oxidative degradation. This increase of the quantum yield of photodegradation was caused by increased mobility of oxygen molecules in the film, connected with movement of polymer chain elements.     

The thermal degradation of poly(-(d)-β-hydroxybutyric acid): Part 2—Changes in molecular weight

Changes in molecular weight occur in poly(-(d)-β-hydroxybutyric acid) in the temperature range 170–200°C, at which latter temperature evolution of volatile products of degradation becomes significant. Two processes are involved in these changes in molecular weight. The more important is random chain scission at ester groups, which results in the formation of carboxyl and vinyl groups. Although this ultimately results in a drastic reduction in the molecular weight of the polymer, this is delayed in the early stages of the reaction by a condensation reaction between the terminal hydroxyl groups present in the original polymer and the terminal carboxyl groups, which were either originally present or formed in the chain scission process. This delay could have relevance to the industrial processing of this material.     

Carborane polymers. IV. Polysiloxanes

Carboranes attached to silicon through straight-chain alkyl groups were prepared and characterized for thermal stability by TGA and molecular weight change on heating. The monomers for these polymers were prepared generally by platinum-catalyzed addition of a silylhydride to an alkenyl or dialkenyl carborane. Polymerization was effected by hydrolysis-condensation of chlorosilanes, ring opening of cyclosiloxanes, and condensation of alkoxy and chlorosilanes. Two types of polymer structures were prepared, one contained m-carborane in the chain backbone, the other contained o-carborane as pendant alkylcarborane groups. Both types were obtained as elastomers; however, higher proportions of carborane in the polymers reduced elasticity and finally resulted in nonelastomers. TGA of the backbone carborane siloxane polymer indicated degradation at 370°C. in nitrogen and at 235°C. in air. Chain scission, as determined by molecular weight decrease, was observed on heating in nitrogen at 350°C. TGA of the pendant carborane siloxane polymer indicated that degradation in nitrogen and in air occurred at greater than 400°C. However, chain scission, as determined by molecular weight decrease, was observed upon heating at 300°C. in nitrogen.     

Isothermal crosslinking studies on polyquinoxalines by dynamic mechanical methods

Torsional braid analysis was used to investigate the crosslinking behavior of linear quinoxaline polymers with and without reactive side groups. The kinetic parameter followed was the glass transition temperature during isothermal exposure in an inert atmosphere. With high molecular weight polyamide-quinoxaline copolymers (PPAQ), an initial decrease in T_g was observed during heat exposure which was followed by a subsequent increase in T_g. This was attributed to simultaneous chain scission and crosslinking reactions. Since the effect of random chain scission on the initial change in T_g of the highest molecular weight polymer samples is much stronger than on low molecular weight analogues, a T_g minimum was observed only on the highest molecular weight polymers. Because of the complexity of the reactions occurring one must consider the activation energies obtained from the Arrhenius plots as “apparent” activation energies. No attempt was made to elucidate the mechanisms of these reactions. It has been shown that isothermal heat exposure of high-temperature aromatic polymers in an inert atmosphere leads to crosslinking. In general, however, linear polymers that have reactive side groups such as methyl or carboxyphenyl groups along the polymer chain crosslink more rapidly than the analogs without these groups.     

Degradation of polymer blends—Part XI. Blends of polystyrene with polyisoprene

The degradation behaviour of polystyrene and cis-1,4-polyisoprene when both are present in the same film as a 1:1 blend has been compared with that when the polymers are degraded separately. Degradations have been studied under programmed heating conditions using TG, TVA, DTA and DSC and also under isothermal conditions at 340 and 360°C. Volatile products of degradation have been studied and separated by sub-ambient TVA and also identified by spectroscopic methods. The volatile products from the blend are the same as those from the constituent polymers. Volatile production occurs less readily for each polymer than when it is degraded alone. Stabilisation of PS is especially marked and under isothermal conditions at the above temperatures, PS does not evolve volatiles until PI degradation is completed. Chain scission in PS, prior to volatilisation, is increased, however, in the presence of PI. It is concluded that the increased scission results from attack on PS by PI radicals of short chain length and that the stabilisation effect on the PS is due to an inhibiting action of dipentene evolved by the PI. Both these reactions follow diffusion of mobile species of rather low volatility from the PI phase into the PS phase.     

Novel theoretical and computer-assisted modeling of isothermal and non-isothermal depolymerization kinetics

A novel kinetic model accounting for the observed asymptotic approach of the degree of polymerization (DP) to a limiting value significantly greater than unity on prolonged degradation is derived and applied to the solid-state degradation of cellulose (Kraft paper) and poly(acrylic acid) (PAA) under isothermal and non-isothermal conditions. Experimental data were fitted using two iterative computer algorithms: one for isothermal DP data and the other for non-isothermal DP data obtained under a linear temperature ramp. The apparent activation energy for the solid-state recombination of chain radicals was found to be low in each case and was attributed to the proximity of free radicals being facilitated by restrictions imposed by the polymer matrix. The application of the model to non-isothermal DP yielded rate parameters that could be reconciled with those obtained from isothermal analyses, suggesting the novel approach has much merit for the future study of polymer degradation.     

Thermal degradation of polyetherimide joined by friction riveting (FricRiveting). Part I: Influence of rotation speed

The thermal degradation of polyetherimides joined by friction riveting (FricRiveting) (Amancio Filho ST, Beyer M, Dos Santos JF. Verfahren zum Verbinden eines metallischen Bolzens mit einem Kunststoff-Werkstück - DE 10 2005 056 606 A1. Germany: Deutsches Patent- und Markenamt; 2007) has been investigated for varying rotation speeds. The rotation speed is an important variable to be understood in order to predict thermal degradation during this process. Investigated rotation speeds in the range of 1570-2199 rad/s resulted in high process temperatures (350-475 °C) and heating rates (up to 2 °C/100 rad/s), but only small heating times (<3 s). Thermal degradation was evaluated by gel permeation chromatography, Fourier transform infrared spectroscopy and X-ray computer microtomography. The results indicated that thermal degradation in the PEI polymer was mainly due to chain scission. Moreover, the small level of thermally degraded material (average drops of 10% in molecular weight) showed only a minor dependence on rotation speed. Although high peak temperatures and heating rates were present, the restricted variation and average values of heating time were insufficient to cause strong thermal changes in the joints of the studied rotation speed range.     

Quantitative analysis of random scission and chain-end scission in the thermal degradation of polyethylene

The thermal degradation of polyethylene includes two different kinds of pathways. These are random and chain-end scissions which include β-scission on the chain end and radical transfer scission. We conducted a quantitative analysis on these pathways by Pyrolysis-GC/MS and computer simulation. Two different distributions of scission products of polyethylene were observed at different temperatures. They are determined by the relationship between rate of reaction and that of volatilisation. Furthermore, a characteristic distribution was observed in lower molecular weight. It could be explained by direct scission and one to five-step radical transfer scissions. The pathway possibilities calculated with the accumulated schemes showed that the direct scission and one-step-radical transfer increased with the temperature. This indicates that β-scission occurs on the chain end before the radical transfer because the rate of the β-scission becomes faster as the temperature rises.     

Thermal and weathering degradation of poly(propylene carbonate)

High molecular-weight poly(propylene carbonate) (PPC) can remain intact upon storage in ambient air or in water for 8 months once the catalyst is completely removed. Catalyst-free pure PPC is also thermally stable below 180 °C. At 200 °C, degradation occurs, mainly due to attack of the chain-ended hydroxyl group onto a carbonate linkage, through which the molecular weight distribution is broadened by simultaneous formation of low and high molecular weight fractions. Incomplete removal of hydrogen peroxide generated during the catalyst preparation results in a prepared polymer that contains a substantial amount of polymer chains grown biaxially from hydrogen peroxide, which gives rise to more severe thermal degradation. Experiments conducted in a weathering chamber at high temperature (63 °C) and high humidity (50%) revealed another degradation process involving chain scission through an attack of water molecules onto the carbonate linkage, which progressively and temporally lowers molecular weight.     

Mathematical Modelling and Computer Simulation of Linear Polymer Degradation: Simple Scissions

Summary: Degradation of a polymer in a reactor by the degrading agent(s) follows a distinct pattern, primarily influenced by structural integrity and reactor environment. This distinct pattern is recorded in the changes in the evolved molecular weight distribution (MWD) or polymer chain length distribution (PCLD) curve characteristics from the initial intact state. Modern size exclusion chromatography (SEC) is the best laboratory‐based method that can clearly provide these plots in the form of chromatogram; however, detailed molecular information is not available. The nature of molecular destruction can be well‐characterised if the distinct MWD shift patterns can be simulated to fingerprint the different chain scission dynamics. This is investigated by our current research using the power of computer simulation techniques to gain insight into the polymer ageing processes. One such technique for studying simple decay processes is presented here, and the results are compared with experimental findings. The concept of a binary tree scission model is introduced to show chain rupture as a sequence of probabilistic events and as a non‐linear function of time. Two new mathematical algorithms, an iterative Monte Carlo structured probability scheme and a semi‐iterative algebraic exact statistical formulation method, are investigated to implement this model and simulate the evolution of resultant temporal MW distribution. The latter, an innovative approach to mathematical modelling, has the potential to generate a statistically perfect instant MWD decay curve. A statistical comparison of the product yield is presented from the data obtained using a wide variety of simulated scission regimes to determine the sources of variability.

Simulated MWD lateral shift for percent cut scission model showing deviation from the initial MWD (red) over degradation time zones T_j(0 ≥ j ≤ 9) with bimodal and curve broadening effect due to accumulation of varied percent cut range 5–30%.     

The rôle of chain ends in the thermal degradation of anionic polystyrene

Direct evidence is given of the initiating rôle played in the thermal degradation of anionic polystyrene by chain ends, either present originally or formed during the degradation. In the early stages of degradation, the most likely bond scission in polystyrenes with benzylic type units (CH₂(C₆H₅)) at both chain ends involves the formation of toluene and an unsaturated terminal unit (CH₂C(C₆H₅)CH₂). The depolymerisation of polystyrene to a mixture of monomer and dimeric, trimeric, etc., fragments is then initiated by further scission at such unsaturated chain ends, giving α-methyl styrene and a depolymerising macroradical.After the early stage of degradation, a further overwhelming contribution to the formation of unsaturated chain ends is derived from chain transfer which occurs during depolymerisation. The concentration of unsaturated chain ends increases throughout the degradation process, thus accelerating the formation of the volatile products of depolymerisation. According to this mechanism of initiation, a constant ratio is found between rates of weight loss and of α-methyl styrene evolution throughout the degradation, independently of the original molecular weight of the polymer.     

Cryogenic degradation of polystyrene in solution

An ultra-high molecular weight and narrow distribution polystyrene ($\text{M}{}_{\mathrm{<mtext>w</mtext>}}\text{= 7.3 × 10}{}^6$, M_w/M_n = 1.13) was dissolved in a wide range of solvents. Potential degradation by freezing was studied as a function of solvent type, concentration, cooling rate and number of freezing cycles. Cryogenic experiments were conducted in dioxane, tetrahydrofuran, benzene, dichloroethane, cyclohexanone, p-xylene, methyl methacrylate and styrene. The extent of degradation did not relate to a single solvent parameter, but there seemed to be a tendency towards a limited degradation in solvents with low melting points and/or solubility parameters greatly different from that of polystyrene. A low polymer concentration as well as a high cooling rate promoted chain scission, the latter parameter being the most important. In cyclohexanone and p-xylene, linear relationships were observed between the number of scission per molecule and the number of freezing cycles at high polymer concentrations and at high cooling rates. At lower concentrations and slower cooling, the relationships were non-linear suggesting a different degradation mechanism. The most extensive change in molecular weight distribution was observed on freezing in styrene. After 45 freezing cycles, an $\text{M}$_w of only 2.3 × 10⁶ was observed. The results indicate that chain scission occurred together with polymerization and combination reactions. Freezing of suitable solutions of ultra-high molecular weight polymers can thus be used as a new way of initiating polymerizations by cooling rather than heating.     

Thermal degradation behavior of poly(4-hydroxybutyric acid)

Thermal degradation behavior of poly(4-hydroxybutyric acid) (P(4HB)) was investigated by thermogravimetric and pyrolysis-gas chromatography mass spectrometric analyses under both isothermal and non-isothermal conditions. Based on the thermogravimetric analysis, it was found that two distinct processes occurred at temperatures below and above 350 °C during the non-isothermal degradation of P(4HB) samples depending on both the molecular weight and the heating rate. From ¹H NMR analysis of the residual P(4HB) molecules after isothermal degradations at different temperatures, it was confirmed that the ω-hydroxyl chain-end was remained unchanged in the residual P(4HB) molecules at temperatures below 300 °C, while the ω-chain-end of P(4HB) molecules was converted to 3-butenoyl units at temperatures above 300 °C. In contrast, the majority of the volatile products evolved during thermal degradation of P(4HB) was γ-butyrolactone regardless of the degradation temperature. From these results, it is concluded that during the thermal degradation of P(4HB), the selective formation of γ-butyrolactone via unzipping reaction from the ω-hydroxyl chain-end predominantly occurs at temperatures below 300 °C. At temperatures above 300 °C, both the cis-elimination reaction of 4HB unit and the formation of cyclic macromolecules of P(4HB) via intramolecular transesterification take place in addition to unzipping reaction from the ω-hydroxyl chain-end. Finally, the primary reaction of thermal degradation of P(4HB) at temperatures above 350 °C progresses by the cyclic rupture via intramolecular transesterification of P(4HB) molecules with a release of γ-butyrolactone as volatile product. Moreover, we carried out the thermal degradation tests for copolymer of 93 mol% of 4HB with 7 mol% of 3-hydroxybutyric acid (3HB) to examine the effect of 3HB units on thermal stability of P(4HB).     

Effects of residual metal compounds and chain-end structure on thermal degradation of poly(3-hydroxybutyric acid)

Thermal degradation behaviours of poly(3-hydroxybutyric acid) (P(3HB); bacterial poly[(R)-3-hydroxybutyric acid] and synthetic poly[(R,S)-3-hydroxybutyric acid] samples, were examined under both isothermal and non-isothermal conditions. The inverse of number-average degree of polymerisation for all P(3HB) samples decreased linearly with degradation time during the initial stage of isothermal degradation at a temperature ranging from 170-190 °C. In addition, crotonyl unit was detected in the residual polymer samples as main ω-chain-end. These results indicate that the dominant thermal degradation reaction for P(3HB) is a random chain scission via cis-elimination reaction of P(3HB) molecules. It was found that the presence of either Ca or Mg ions enhances the depolymerisation of P(3HB) molecules, while that Zn ions hardly catalyse the reaction. As a result, a shift of thermogravimetric curves toward the lower temperature regions was observed for the P(3HB) samples containing high amounts of Ca and Mg compounds.