Butyllithium Addition to α‐Chiral Compounds: Solvent Mixture Effects on Diastereofacial Selectivity

Temperature‐dependent selectivity in nucleophilic additions is affected by the solvent. In this context, we investigated the effect on diastereoselectivity of solvent mixtures with respect to pure solvents. Binary systems of THF/hexane and of four different hydrocarbon mixtures were employed in BuLi addition to 2‐phenylpropanal, (2S)‐2‐[(tert‐butyl)dimethylsilyloxy]‐2‐phenylethanal, and (2S)‐2‐[(tert‐butyl)dimethylsilyloxy]‐N‐(trimethylsilyl)propan‐1‐imine. A 5‐mol‐% of THF in hexane affects the isomer ratio by reducing both ΔΔH^≠ and ΔΔS^≠ contributions, and suppresses T_inv. On the contrary, in hydrocarbon binary mixtures, the T_inv is still observed and occurs at a higher temperature than in pure solvents. Studying the dependence of T_inv on the hexane/decane mixture composition, we propose the formation of a peculiar solvation cluster that is unaffected by the composition of the bulk reaction solvent.     

Synthesis and Applications of Silyl 2‐Methylprop‐2‐ene‐1‐sulfinates in Preparative Silylation and GC‐Derivatization Reactions of Polyols and Carbohydrates

Trimethylsilyl, triethylsilyl, tert‐butyldimethylsilyl, and triisopropylsilyl 2‐methylprop‐2‐ene‐1‐sulfinates were prepared through (CuOTf)₂?C₆H₆‐catalyzed sila‐ene reactions of the corresponding methallylsilanes with SO₂ at 50 °C. Sterically hindered, epimerizable, and base‐sensitive alcohols gave the corresponding silyl ethers in high yields and purities at room temperature and under neutral conditions. As the byproducts of the silylation reaction (SO₂+isobutylene) are volatile, the workup was simplified to solvent evaporation. The developed method can be employed for the chemo‐ and regioselective semiprotection of polyols and glycosides and for the silylation of unstable aldols. The high reactivity of the developed reagents is shown by the synthesis of sterically hindered per‐O‐tert‐butyldimethylsilyl‐α‐d ‐glucopyranose, the X‐ray crystallographic analysis of which is the first for a per‐O‐silylated hexopyranose. The per‐O‐silylation of polyols, hydroxy carboxylic acids, and carbohydrates with trimethylsilyl 2‐methylprop‐2‐ene‐1‐sulfinate was coupled with the GC analysis of nonvolatile polyhydroxy compounds both qualitatively and quantitatively.     

Kinetics and mechanism of the aminolysis of O‐phenyl 4‐nitrophenyl dithiocarbonate in aqueous ethanol

The reactions of the title substrate (1) with a series of secondary alicyclic amines are subjected to a kinetic investigation in 44 wt% ethanol‐water, at 25.0°C, ionic strength 0.2 M (KCl). Under amine excess over the substrate, pseudo‐first‐order rate coefficients (k_obs) are obtained. Plots of k_obs against [NH], where NH is the free amine, are nonlinear upwards, except the reactions of piperidine, which show linear plots. According to the kinetic results and the analysis of products, a reaction scheme is proposed with two tetrahedral intermediates, one zwitterionic (T^±) and another anionic (T⁻), with a kinetically significant proton transfer from T^± to an amine to yield T⁻ (k₃ step). By nonlinear least‐squares fitting of an equation derived from the scheme to the experimental points, the rate microcoefficients involved in the reactions are determined. Comparison of the kinetics of the title reactions with the linear k_obs vs. [NH] plots found in the same aminolysis of O‐ethyl 4‐nitrophenyl dithiocarbonate (2) in the same solvent shows that the rate coefficient for leaving group expulsion from T^± (k₂) is larger for 2 due to a stronger push by EtO than PhO. The k₃ value is the same for both reactions since both proton transfers are diffusion controlled. Comparison of the title reactions with the same aminolysis of phenyl 4‐nitrophenyl thionocarbonate (3) in water indicates that (i) the k₂ value is larger for the aminolysis of 1 due to the less basic nucleofuge involved and the small solvent effect on k₂, (ii) the k₃ value is smaller for the reactions of 1 due to the more viscous solvent, (iii) the rate coefficient for amine expulsion from T^± (k₋₁) is larger for the aminolysis of 1 than that of 3 due to a solvent effect, and (iv) the value of the rate coefficient for amine attack (k₁) is smaller for the aminolysis of 1 in aqueous ethanol, which can be explained by a predominant solvent effect relative to the electron‐withdrawing effect from the nucleofuge. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 839–845, 1999     

Majority‐Rules‐Type Helical Poly(quinoxaline‐2,3‐diyl)s as Highly Efficient Chirality‐Amplification Systems for Asymmetric Catalysis

A highly efficient majority‐rules effect of poly(quinoxaline‐2,3‐diyl)s (PQXs) bearing 2‐butoxymethyl chiral side chains at the 6‐ and 7‐positions was established and attributed to large ΔG_h values (0.22–0.41 kJ mol^?1), which are defined as the energy difference between P‐ and M‐helical conformations per chiral unit. A PQX copolymer prepared from a monomer derived from (R)‐2‐octanol (23 % ee) and a monomer bearing a PPh₂ group adopted a single‐handed helical structure (>99 %) and could be used as a highly enantioselective chiral ligand in palladium‐catalyzed asymmetric reactions (products formed with up to 94 % ee), in which the enantioselectivity could be switched by solvent‐dependent inversion of the helical PQX backbone.     

Regioselective deprotection of the monosaccharide‐bearing thiocyanomethyl group at the anomeric position monitored by reversed‐phase HPLC method

In the current work, the investigation and development of a chemo‐enzymatic approach for the synthesis of neo‐glycoproteins have been studied. This strategy is based on the regioselective enzymatic hydrolysis of peracetylated monosaccharide, functionalized at the anomeric position (C1) as 1‐thio‐(S‐cyanomethyl) group, a precursor of the 2‐ iminomethoxyethyl thioglycosides‐linker for protein glycosylation, catalyzed by immobilized enzymes to obtain selectively monodeprotected compounds. The use of this activation in C1 is the most frequently used strategy for glycoprotein preparation. The selected biocatalysts are the lipase from Candida rugosa and the acetyl xylan esterase from Bacillus pumilus. A reversed‐phase high‐performance liquid‐chromatographic (HPLC) method for monitoring the regioselective deprotection reaction has been developed. The developed HPLC method was used as a fingerprint to follow the hydrolysis of substrate 1 to substrate 1a and to determine its purity and yield. Moreover, the obtained compound was further purified by flash chromatography. The obtained compound 1a was further characterized using ¹H, ¹³C NMR, correlation spectroscopy (COSY) and heteronuclear multiple bond correlation. The resulting product can be used as an intermediate for the preparation of di‐ and more complex oligosaccharides aimed at protein conjugation. Copyright © 2016 John Wiley & Sons, Ltd.     

Lipase‐Catalyzed Transesterification of Polyesters to Ester Copolymers

Lipase‐catalyzed intermolecular transesterification between two different polyesters has been carried out using in toluene. The transesterification of poly(ε‐caprolactone) (PCL) and (1,4‐butylene adipate) took place via catalysis of lipase from Candida antarctica to give an ester copolymer. ¹³C NMR analysis showed that the resulting polymer was not a mixture of the starting polyesters, but a copolymer consisting of both units. The reaction temperature and solvent amount greatly affected the microstructure of the ester copolymer. Under appropriate conditions, the random copolymer was formed. The enzymatic transesterification has been monitored by size exclusion chromatography (SEC) and ¹³C NMR. Ester copolymers were enzymatically obtained from PCL and other poly(α,ω‐alkylene dicarboxylate)s and their microstructure depended on the polyester structure.     

Synthesis of metal‐free poly(1,4‐dioxan‐2‐one) by enzyme‐catalyzed ring‐opening polymerization

To avoid the harmful effects of metallic residues in poly(1,4‐dioxan‐2‐one) (PPDO) for medical applications, the enzymatic polymerization of 1,4‐dioxan‐2‐one (PDO) was carried out at 60 °C for 15 h with 5 wt % immobilized lipase CA. The lipase CA, derived from Candida antarctica, exhibited especially high catalytic activity. The highest weight‐average molecular weight (M_w = 41,000) was obtained. The PDO polymerization by the lipase CA occurred because of effective enzyme catalysis. The water component appeared to act not only as a substrate of the initiation process but also as a chain cleavage agent. A slight amount of water enhanced the polymerization, but excess water depressed the polymerization. PPDO prepared by enzyme‐catalyzed polymerization is a metal‐free polyester useful for medical applications. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1560–1567, 2000     

Retracted: Acid‐Catalyzed Aquation of Ni(II)‐Hydrazone Complexes: Kinetics and Solvent Effect

Complexes of the type [Ni(L)(H₂O)]Cl₂·nH₂O, where L = 2‐pyridyl‐3‐isatinbishydrazone ligands, have been synthesized and characterized on the bases of elemental analysis, molar conductance, IR, electronic spectra, and thermal analysis (TGA and DTA). Acid‐catalyzed aquation of the Ni(II) isatin‐bishydrazone complexes was followed spectrophotometrically in various water–methanol and water–acetone mixtures at temperature 298 K. Kinetic behavior of the acid aquation is a linear rate law, indicating that the acid‐catalyzed aquation of these complexes in water–methanol and water–acetone mixtures follows a rate law with k_obs = k₂[H⁺]. The effect of the mole fraction of the ganic solvent, i.e., methanol and acetone, on the acid aquation has been analyzed; the decrease in the rate constant values with increasing of the methanol or acetone ratios is attributable to the effect of the co‐organic solvent on the initial states of the acid aquation by the destabilization of the H⁺ ion.     

Kinetics of the ene reactions of 4‐phenyl‐1,2,4‐triazoline‐3,5‐dione with β‐pinene and 2‐carene: Temperature,high pressure,and solvent effects

The data on temperature, solvent, and high hydrostatic pressure influence on the rate of the ene reactions of 4‐phenyl‐1,2,4‐triazoline‐3,5‐dione ( 1 ) with 2‐carene ( 2 ), and β‐pinene ( 4 ) have been obtained. Ene reactions 1 + 2 and 1 + 4 have high heat effects: ∆H_r‐n ( 1 + 2 ) −158.4, ∆H_r‐n( 1 + 4 ) −159.2 kJ mol⁻¹, 25°C, 1,2‐dichloroethane. The comparison of the activation volume (∆V^≠( 1 + 2 ) −29.9 cm³ mol⁻¹, toluene; ∆V^≠( 1 + 4 ) −36.0 cm³ mol⁻¹, ethyl acetate) and reaction volume values (∆V_r‐n( 1 + 2 ) −24.0 cm³ mol⁻¹, toluene; ∆V_r‐n( 1 + 4 ) −30.4 cm³ mol⁻¹, ethyl acetate) reveals more compact cyclic transition states in comparison with the acyclic reaction products 3 and 5 . In the series of nine solvents, the reaction rate of 1+2 increases 260‐fold and 1+4 increases 200‐fold, respectively, but not due to the solvent polarity.     

Solvent Dependent Spin‐Crossover and Photomagnetic Properties in an Imidazolylimine FeII Complex

The synthesis and physico‐chemical characterization of an Fe^II complex [Fe( L1 )₃](ClO₄)₂?CH₃CN?0.5H₂O, 1 , incorporating a bidentate imidazolylimine‐based ligand are reported. Complex 1 crystallises as the mer‐isomer and the crystal lattice is replete with hydrogen bonding interactions between ClO₄^? anions, solvent molecules and imidazole N‐H groups. Variable‐temperature structural, magnetic, photomagnetic and optical reflectivity techniques have been deployed to fully characterise the spin‐crossover (SCO) behaviour in 1 along with its desolvated phase, 1?desolv . Variable‐temperature (1.8–300 K) magnetic‐susceptibility measurements reveal a broad two‐step full SCO for 1 (T_1/2=158 and 184 K) and photomagnetic experiments at 10 K under white‐light irradiation revealed complete photo‐induced SCO. 1?desolv displays considerably different magnetic behaviour with sharp single‐step SCO accompanied by a thermal hysteresis (T_1/2↑=105 K, T_1/2↓=95 K) in addition to full photo‐induced SCO at lower temperatures.     

Long‐Lived Room‐Temperature Deep‐Red‐Emissive Intraligand Triplet Excited State of Naphthalimide in Cyclometalated IrIII Complexes and its Application in Triplet‐Triplet Annihilation‐Based Upconversion

Cyclometalated Ir^III complexes with acetylide ppy and bpy ligands were prepared (ppy=2‐phenylpyridine, bpy=2,2′‐bipyridine) in which naphthal ( Ir‐2 ) and naphthalimide (NI) were attached onto the ppy ( Ir‐3 ) and bpy ligands ( Ir‐4 ) through acetylide bonds. [Ir(ppy)₃] ( Ir‐1 ) was also prepared as a model complex. Room‐temperature phosphorescence was observed for the complexes; both neutral and cationic complexes Ir‐3 and Ir‐4 showed strong absorption in the visible range (ε=39600 M ^?1 cm^?1 at 402 nm and ε=25100 M ^?1 cm^?1 at 404 nm, respectively), long‐lived triplet excited states (τ_T=9.30 μs and 16.45 μs) and room‐temperature red emission (λ_em=640 nm, Φ_p=1.4 % and λ_em=627 nm, Φ_p=0.3 %; cf. Ir‐1 : ε=16600 M ^?1 cm^?1 at 382 nm, τ_em=1.16 μs, Φ_p=72.6 %). Ir‐3 was strongly phosphorescent in non‐polar solvent (i.e., toluene), but the emission was completely quenched in polar solvents (MeCN). Ir‐4 gave an opposite response to the solvent polarity, that is, stronger phosphorescence in polar solvents than in non‐polar solvents. Emission of Ir‐1 and Ir‐2 was not solvent‐polarity‐dependent. The T₁ excited states of Ir‐2 , Ir‐3 , and Ir‐4 were identified as mainly intraligand triplet excited states (³IL) by their small thermally induced Stokes shifts (ΔE_s), nanosecond time‐resolved transient difference absorption spectroscopy, and spin‐density analysis. The complexes were used as triplet photosensitizers for triplet‐triplet annihilation (TTA) upconversion and quantum yields of 7.1 % and 14.4 % were observed for Ir‐2 and Ir‐3 , respectively, whereas the upconversion was negligible for Ir‐1 and Ir‐4 . These results will be useful for designing visible‐light‐harvesting transition‐metal complexes and for their applications as triplet photosensitizers for photocatalysis, photovoltaics, TTA upconversion, etc.     

A Monolithic Hybrid Cellulose‐2.5‐Acetate/Polymer Bioreactor for Biocatalysis under Continuous Liquid–Liquid Conditions Using a Supported Ionic Liquid Phase

Mesoporous monolithic hybrid cellulose‐2.5‐acetate (CA)/polymer supports were prepared under solvent‐induced phase separation conditions using cellulose‐2.5‐acetate microbeads 8–14 μm in diameter, 1,1,1‐tris(hydroxymethyl)propane and 4,4′‐methylenebis(phenylisocyanate) as monomers as well as THF and n‐heptane as porogenic solvents. 4‐(Dimethylamino)pyridine and dibutyltin dilaurate (DBTDL), respectively, were used as catalysts. Monolithic hybrid supports were used in transesterification reactions of vinyl butyrate with 1‐butanol under continuous, supported ionic liquid–liquid conditions with Candida antarctica lipase B (CALB) and octylmethylimidazolium tetrafluoroborate ([OMIM⁺][BF₄^?]) immobilized within the CA beads inside the polymeric monolithic framework and methyl tert‐butyl ether (MTBE) as the continuous phase. The new hybrid bioreactors were successfully used in dimensions up to 2×30 cm (V=94 mL). Under continuous biphasic liquid–liquid conditions a constant conversion up to 96 % was achieved over a period of 18 days, resulting in a productivity of 58 μmol mg^?1(CALB) min^?1. This translates into an unprecedented turnover number (TON) of 3.9×10⁷ within two weeks, which is much higher than the one obtained under standard biphasic conditions using [OMIM⁺][BF₄^?]/MTBE (TON=2.7×10⁶). The continuous liquid–liquid setup based on a hybrid reactor presented here is strongly believed to be applicable to many other enzyme‐catalyzed reactions.     

The N‐Methylpyrrolidone (NMP) Effect in Iron‐Catalyzed Cross‐Coupling with Simple Ferric Salts and MeMgBr

The use of N‐methylpyrrolidone (NMP) as a co‐solvent in ferric salt catalyzed cross‐coupling reactions is crucial for achieving the highly selective, preparative scale formation of cross‐coupled product in reactions utilizing alkyl Grignard reagents. Despite the critical importance of NMP, the molecular level effect of NMP on in situ formed and reactive iron species that enables effective catalysis remains undefined. Herein, we report the isolation and characterization of a novel trimethyliron(II) ferrate species, [Mg(NMP)₆][FeMe₃]₂ ( 1 ), which forms as the major iron species in situ in reactions of Fe(acac)₃ and MeMgBr under catalytically relevant conditions where NMP is employed as a co‐solvent. Importantly, combined GC analysis and ⁵⁷Fe Mössbauer spectroscopic studies identified 1 as a highly reactive iron species for the selective formation generating cross‐coupled product. These studies demonstrate that NMP does not directly interact with iron as a ligand in catalysis but, alternatively, interacts with the magnesium cations to preferentially stabilize the formation of 1 over [Fe₈Me₁₂]^? cluster generation, which occurs in the absence of NMP.     

Synthesis of Cyclobutenes and Allenes by Cobalt‐Catalyzed Cross‐Dimerization of Simple Alkenes with 1,3‐Enynes

Cobalt‐catalyzed cross‐dimerization of simple alkenes with 1,3‐enynes is reported. A [2+2] cycloaddition reaction occurred, with alkenes bearing no allylic hydrogen, by reductive elimination of a η³‐butadienyl cobaltacycle. On the other hand, aliphatic alkenes underwent 1,4‐hydroallylation by means of exo‐cyclic β‐H elimination. These reactions can provide cyclobutenes and allenes that were previously difficult to access, from simple substrates in a highly chemo‐ and regioselective manner.     

Kinetics and mechanism of tertiary amine‐catalyzed cleavage of N′‐morpholino‐N‐(2′‐methoxyphenyl)phthalamide: Kinetic evidence for the presence of a reactive intermediate on the reaction path

Pseudo‐first‐order rate constants (k_obs) for tertiary amine (DABCO and Me₃N) buffer‐catalyzed cyclization of N′‐morpholino‐N‐(2′‐methoxyphenyl)phthalamide ( 1 ) to N‐(2′‐methoxyphenyl)phthalimide ( 2 ) reveal saturation (nonlinear) plots of k_obs versus [Buf]_T (total tertiary amine buffer concentration) at a constant pH. Such plots at different pH have been attributed to the presence of a reactive intermediate (T^?) formed by tertiary amine buffer‐catalyzed intramolecular nucleophilic addition of the secondary amide nitrogen to the carbonyl carbon of the tertiary amide group of 1 . © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 263–272, 2010     

Influence of the stereochemical configuration on the radical polymerization of methacrylic monomers: cis‐ and trans‐(2‐cyclohexyl‐1,3‐dioxan‐5‐yl) methacrylate

The synthesis of two new isomeric monomers, cis‐(2‐cyclohexyl‐1,3‐dioxan‐5‐yl) methacrylate (CCDM) and trans‐(2‐cyclohexyl‐1,3‐dioxan‐5‐yl) methacrylate (TCDM), starting from the reaction of glycerol and cyclohexanecarbaldehyde, is reported. The process involved the preparation of different alcohol acetals and esterification with methacryloyl chloride of the corresponding cis and trans 5‐hydroxy compounds of 2‐cyclohexyl‐1,3‐dioxane. The radical polymerization reactions of both monomers, under the same conditions of temperature, solvent, monomer, and initiator concentrations, were studied to investigate the influence of the monomer configuration on the values of the propagation and termination rate constants (k_p and k_t ).The values of the ratio k_p /k_t ^1/2 were determined by UV spectroscopy by the measurement of the changes of absorbance with time at several wavelengths in the range 275–285 nm, where an appropriate change in absorbance was observed. Reliable values of the kinetics constants were determined by UV spectroscopy, showing a very good reproducibility of the kinetic experiments. The values of k_p /k_t ^1/2, in the temperature interval 45–65 °C, lay in the range 0.40–0.50 L^1/2/mol^1/2s^1/2 and 0.20–0.30 L^1/2/mol^1/2s^1/2 for CCDM and TCDM, respectively. Measurements of both the radical concentrations and the absolute rate constants k_p and k_t were also carried out with electron paramagnetic resonance techniques. The values of k_p at 60 °C were nearly identical for both the trans and cis monomers, but the termination rate constant of the trans monomer was about three times that of the cis monomer at the same temperature. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3883–3891, 2000     

Influence of Temperatures on the Tautomerism of the N‐(1H‐imidazoline‐2‐yl)‐1H‐benzimidazol‐2‐amine and Investigation of Its Electrochemical Behaviour

Synthesis of N‐(1H‐imidazoline‐2‐yl)‐1H‐benzimidazol‐2‐amine was carried out under microwave irradiation (MWI) conditions. Dynamic ¹H NMR investigation of N‐(1H‐imidazoline‐2‐yl)‐1H‐benzimidazol‐2‐amine compound was reported at temperature range of 223–333 K in DMF‐d₇. Some physical parameters, such as coalescence temperature (T_c), the free energy of activation (ΔG^??) and rate constant (k) values were calculated from its ¹H NMR spectra at various temperatures. Electrochemical feature of this compound was investigated by cyclic (CV) and square wave voltammetry (SWV).     

KOtBu‐Catalyzed Michael Addition Reactions Under Mild and Solvent‐Free Conditions

Designed transition metal complexes predominantly catalyze Michael addition reactions. Inorganic and organic base‐catalyzed Michael addition reactions have been reported. However, known base‐catalyzed reactions suffer from the requirement of solvents, additives, high pressure and also side‐reactions. Herein, we demonstrate a mild and environmentally friendly strategy of readily available KO^tBu‐catalyzed Michael addition reactions. This simple inorganic base efficiently catalyzes the Michael addition of underexplored acrylonitriles, esters and amides with (oxa‐, aza‐, and thia‐) heteroatom nucleophiles. This catalytic process proceeds under solvent‐free conditions and at room temperature. Notably, this protocol offers an easy operational procedure, broad substrate scope with excellent selectivity, reaction scalability and excellent TON (>9900). Preliminary mechanistic studies revealed that the reaction follows an ionic mechanism. Formal synthesis of promazine is demonstrated using this catalytic protocol.     

Polar,functionalized diene‐based material. III. Free‐radical polymerization of 2‐[(N,N‐dialkylamino)methyl]‐1,3‐butadienes

The bulk free‐radical polymerization of 2‐[(N,N‐dialkylamino)methyl]‐1,3‐butadiene with methyl, ethyl, and n‐propyl substituents was studied. The monomers were synthesized via substitution reactions of 2‐bromomethyl‐1,3‐butadiene with the corresponding dialkylamines. For each monomer the effects of the polymerization initiator, initiator concentration, and reaction temperature on the final polymer structure, molecular weight, and glass‐transition temperature (T_g) were examined. Using 2,2′‐azobisisobutyronitrile as the initiator at 75 °C, the resulting polymers displayed a majority of 1,4 microstructures. As the temperature was increased to 100 and 125 °C using t‐butylperacetate and t‐butylhydroperoxide, the percentage of the 3,4 microstructure increased. Differential scanning calorimetry indicated that all of the T_g values were lower than room temperature. The T_g values were higher when the majority of the polymer structure was 1,4 and decreased as the percentage of the 3,4 microstructure increased. The Diels–Alder side products found in the polymer samples were characterized using NMR and gas chromatography‐mass spectrometry methods. The polymerization temperature and initiator concentration were identified as the key factors that influenced the Diels–Alder dimer yield. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4070–4080, 2000     

Variable temperature 19F solid‐state NMR study of the effect of electrostatic interactions on thermally‐stimulated molecular motions in perfluorosulfonate ionomers

This study uses variable temperature ¹⁹F solid‐state nuclear magnetic resonance (SSNMR) spectroscopy to determine the influence of electrostatic interactions on the T₁, T_1ρ, and T₂ values of Nafion®. Because of a “homogenizing” of the T₁'s as a result of spin diffusion, it was not possible to resolve from the T₁ experiments the relative motions of the side‐ and main‐chain. The initial increase in T_1ρ as a function of increasing temperature has been attributed to backbone rotations that increase with increasing temperature. The maxima observed in the T_1ρ plots suggest a change in the dominant relaxation mechanism at that temperature. The similarity in relaxation behavior of the side‐ and main‐chains suggests that the motions are dynamically coupled, because of the fact that the side‐chain is directly attached to the main‐chain. Two T_1ρ values were observed for the main‐chain at high temperatures, which has been attributed to a thermally activated ion‐hopping process. The results of T₂ studies show that correlated motions of the side‐ and main‐chain exist at low temperatures. However, at elevated temperatures the T₂ values for the side‐chain increase rapidly while remaining relatively constant for the main‐chain, indicating an onset of mobility of the side‐chains. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2177–2186, 2007