Electrosynthesis of blue-light-emitting oligo(1-bromopyrene) with favorable solubility

Bromo-group-substituted oligopyrene films were electrochemically synthesized by direct anodic oxidation of 1-bromopyrene (BrP) in boron trifluoride diethyl etherate (BFEE). The oxidation potential of BrP was measured to be approximately 0.52 V (vs. Ag/AgCl), which was much lower than that detected in a neutral electrolyte such as acetonitrile (1.2 V vs. Ag/AgCl) and CH₂Cl₂ (1.25 V vs. Ag/AgCl). Oligo(1-bromopyrene) (OBrP) films showed good redox activity in both BFEE and concentrated sulfuric acid. Fourier transform infrared spectroscopy, ¹H NMR, and theoretical calculations showed that the electropolymerization of the BrP monomer mainly occurred at the C₍₃₎, C₍₆₎, and C₍₈₎ positions. As-formed OBrP was a typical blue light emitter with fluorescent quantum yields of 0.27, also emitted strong and bright blue photoluminescence at excitation of 365 nm UV light. Furthermore, the films were readily soluble in dimethyl sulfoxide, CH₂Cl₂, acetonitrile, and acetone. All these results indicate that the striking OBrP films have many potential applications in various fields, such as optoelectronic materials, DNA fluorescence probes, and electrochemical sensors.     

Hemin Modified Carbon Fat Electrode for Analyzing Antimalarial Endoperoxide Artemisinin in Artemisia annua

A hemin bulk modified carbon electrode with Adeps neutralis (solid fat) as binder was developed for the determination of antimalarial endoperoxide artemisinin in plant matrix. The hemin modified electrode showed significant catalytic activity for the electrochemical reduction of artemisinin at about ?380 mV vs. Ag/AgCl in phosphate buffer solution of pH 7 by using cyclic and differential pulse voltammetry. Under optimized conditions strict linearity between artemisinin concentration and height of the cathodic catalytic current peak was observed in 4.8×10^?6–7.8×10^?5 M concentration range (R=0.9991) when using differential pulse voltammetry. The detection limit was calculated as 1.4×10^?6 M of artemisinin. The developed electroanalytical device is suitable for the determination of artemisinin in Artemisia annua extracts.     

A Monolithically Integrated Gallium Nitride Nanowire/Silicon Solar Cell Photocathode for Selective Carbon Dioxide Reduction to Methane

A gallium nitride nanowire/silicon solar cell photocathode for the photoreduction of carbon dioxide (CO₂) is demonstrated. Such a monolithically integrated nanowire/solar cell photocathode offers several unique advantages, including the absorption of a large part of the solar spectrum and highly efficient carrier extraction. With the incorporation of copper as the co‐catalyst, the devices exhibit a Faradaic efficiency of about 19 % for the 8e^? photoreduction to CH₄ at ?1.4 V vs Ag/AgCl, a value that is more than thirty times higher than that for the 2e^? reduced CO (ca. 0.6 %).     

Anodized Iron Oxide Nanostructures on Different Carbon Steels for Photoelectrochemical Water Splitting

In this study, two different nanostructural iron oxide films were prepared on two kinds of carbon steels (CS) with different contents of impurities via anodization in a mixture of aqueous ammonium fluoride solution and ethylene glycol, respectively, and apply to photoelectrochemical (PEC) water splitting. After annealing, iron oxide nanotubes (NTs) was coated on surface of lower purity CS and iron oxide nanoporous (NPs) was coated on surface of higher purity CS via scanning electron microscope. X‐ray diffraction pattern shows both of samples contain a major phase of α‐Fe₂O₃ and a slight phase of Fe₃O₄. Compared with NPs, NTs behaves better absorbance ability in visible spectra range via UV‐visible absorbance spectra. From PEC response, the iron oxide NTs showed higher water splitting performance (0.10 mA/cm² at 0.4 V vs. Ag/AgCl) than NPs (0.04 mA/cm² at 0.4 V vs. Ag/AgCl) due to better absorbance, higher car‐ rier concentration and low charge transfer resistance.     

Direct determination of bismuth(III) in sea water by square-wave anodic stripping voltammetry at a glassy-carbon rotating-disk electrode

A method for the determination of bismuth(III) in untreated sea water at its natural pH of 8.1 is described. A bare glassy-carbon rotating-disk electrode is preconditioned by placing in the sample at an applied potential of ?0.8 V vs. Ag/AgCl for 20 min; after stripping to ?0.4 V, bismuth is accumulated for 5 min at ?0.8 V and finally stripped in the square-wave mode. The bismuth peak appears at ca. + 0.10 V vs. Ag/AgCl; peak height is linearly related to concentration up to 2×10^?10 mol dm^?3. The method is highly selective for bismuth. The concentration of Bi(III) in the investigated sample was (6±1)×10^?11 mol dm^?3, or 12±2 ng dm^?3. The different types of response obtained are discussed.     

Flow potentiometric and constant-current stripping analysis for arsenic(V) without prior chemical reduction to arsenic(III): Application to the Determination of Total Arsenic in Seawater and Urine

Arsenic(V) is reduced to elemental arsenic on a gold-coated platinum-fibre electrode at electrolysis potentials below ?1.60 V vs. Ag/AgCl and subsequently re-oxidized, either by means of a constant current, or chemically, with gold(III) as oxidant. Total arsenic in acidified seawater can be determined by means of electrolysis for 60 s at ?1.80 V vs. Ag/AgCl and subsequent stripping in 4 M hydrochloric acid containing 2.5 M calcium chloride. The detection limit obtained after 60 s of electrolysis (ca. 0.1 μg1^?1) is about ten times lower than that obtained by the electrochemical stripping methods for arsenic(III) reported hitherto. Total arsenic in urine is determined after digestion with nitric acid and hydrogen peroxide.     

Fabrication of dual Z-scheme photocatalyst via coupling of BiOBr/Ag/AgCl heterojunction with P and S co-doped g-C3N4 for efficient phenol degradation

Advances in noble metal mediated Z-scheme photocatalytic system have ushered in a climax on environmental remediation. Herein, graphitic carbon nitride (GCN) and phosphorus sulphur co-doped graphitic carbon nitride (PSCN) were synthesized via calcination process. GCN, PSCN and Z-scheme visible light driven (VLD) ternary BiOBr/PSCN/Ag/AgCl nanophotocatalyst were characterized by X-ray diffraction pattern (XRD), Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and UV–visible diffuse reflectance spectra (UV–vis DRS). BiOBr/PSCN/Ag/AgCl nanocomposite exhibited superior visible light driven photocatalytic ability as compared to pristine PSCN, AgCl and BiOBr towards degradation of phenol. The results explicated promising photocatalytic activity along with space separation of photocarriers caused via formation of BiOBr/PSCN/Ag/AgCl Z-scheme heterojunction. The visible light absorption efficacy of BiOBr/PSCN/Ag/AgCl photocatalyst was confirmed by photoluminescence (PL) spectra. Finally, recycling experiments were explored for the mechanistic detailing of phenol photodegradation employing BiOBr/PSCN/Ag/AgCl photocatalyst. After seven successive cycles photodegradation efficacy of photocatalyst was reduced to 90% from 98%. Proposed mechanism of BiOBr/PSCN/Ag/AgCl nanophotocatalyst for degradation of phenol was discussed. OH and O₂⁻ radicals were main reactive species responsible for photocatalytic phenol degradation.     

Non-enzymatic analysis of glucose on printed films based on multi-walled carbon nanotubes

We report on the fabrication of an enzyme–free electrochemical sensor for glucose based on a printed film consisting of multi–walled carbon nanotubes (MWCNTs). The MWCNT–based film can be produced by means of a flexographic printing process on a polycarbonate (PC) substrate. The electrochemical response of the MWCNT–based film (referred to as MWCNT–PC) towards the oxidation of glucose at pH 7 was studied by means of cyclic voltammetry and electrochemical impedance spectroscopy. The MWCNT–PC film exhibits substantial electrocatalytic activity towards the oxidation of glucose at an anodic potential of 0.30?V (vs. Ag/AgCl). The findings reveal that the MWCNT–PC film enables non–enzymatic sensing of glucose with a detection limit as low as 2.16?μM and a sensitivity of 1045?μA?mM^?1?cm^?2.

Paper-derived cobalt and nitrogen co-doped carbon nanotube@porous carbon as a nonprecious metal electrocatalyst for the oxygen reduction reaction

The oxygen reduction reaction (ORR) is a vitally important process in fuel cells. The development of high-performance and low-cost ORR electrocatalysts with outstanding stability is essential for the commercialization of the electrochemical energy technology. Herein, we report a facile synthesis of cobalt (Co) and nitrogen (N) co-doped carbon nanotube@porous carbon (Co/N/CNT@PC-800) electrocatalyst through a one-step pyrolysis of waste paper, dicyandiamide, and cobalt(II) acetylacetonate. The surface of the hierarchical porous carbon supported a large number of carbon nanotubes (CNTs), which were derived from dicyandiamide through the catalysis of Co. The addition of Co resulted in the formation of a hierarchical micro/mesoporous structure, which was beneficial for the exposure of active sites and rapid transportation of ORR-relevant species (O₂, H⁺, OH^?, and H₂O). The doped N and Co formed more active sites to enhance the ORR activity of the electrocatalyst. The Co/N/CNT@PC-800 material exhibited optimal ORR performance with an onset potential of 0.005 V vs. Ag/AgCl and a half-wave potential of –0.173 V vs. Ag/AgCl. Meanwhile, the electrocatalyst showed an excellent methanol tolerance and a long-term operational durability than that of Pt/C, as well as a quasi-four-electron reaction pathway. The low-cost and simple synthesis approach makes the Co/N/CNT@PC-800 a prospective electrocatalyst for the ORR. Furthermore, this work provides an alternative approach for exploring the use of biomass-derived electrocatalysts for renewable energy applications.     

Direct electron transfer with glucose oxidase immobilized in an electropolymerized poly( N-methylpyrrole) film on a gold microelectrode

Direct electron transfer between active glucose oxidase (GOD) and a gold electrode was obtained when GOD was immobilized in poly(N-methylpyrrole) electrochemically prepared on the gold electrode. When electropolymerization was accomplished at 50 °C, after glucose addition, the cyclic voltammograms showed an increased oxidation peak at ca. ?0.45 V vs. Ag/AgCl. This potential corresponds to the oxidation potential for FADH₂. Although the GOD becomes much less selective, a glucose-dependent current response is obtained.     

Syntheses and investigation of the effects of position and nature of substituent on the spectral,electrochemical and spectroelectrochemical properties of new cobalt phthalocyanine complexes

The syntheses of new cobalt phthalocyanine (CoPc) complexes, tetra-substituted with diethylaminoethanethio at the peripheral (complex 3a) and non-peripheral (complex 3b) positions, and with benzylmercapto at the non-peripheral position (complex 5), are reported. The effects of the nature and position of substituent on the spectral, electrochemical and spectroelectrochemical properties of these complexes are investigated. Solution electrochemistry of complex 3a showed three distinctly resolved redox processes attributed to Co^IIIPc⁻²/Co^IIPc⁻² (E_½ = +0.64 V versus Ag|AgCl), Co^IIPc⁻²/Co^IPc⁻² (E_½ = −0.24 V versus Ag|AgCl) and Co^IPc⁻²/Co^IPc⁻³ (E_½ = −1.26 V versus Ag|AgCl) species. No ring oxidation was observed in complex 3a. Complex 3b showed both ring-based oxidation, attributed to Co^IIIPc⁻¹/Co^IIIPc⁻² species (E_p = +0.86 V versus Ag|AgCl), and ring-based reduction associated with Co^IPc⁻²/Co^IPc⁻³ species (E_½ = −1.46 V versus Ag|AgCl), with the normal metal-based redox processes in CoPc complexes: Co^IIIPc⁻²/Co^IIPc⁻² (E_p = +0.41 V versus Ag|AgCl) and Co^IIPc⁻²/Co^IPc⁻² (E_½ = −0.38 V versus Ag|AgCl). Solution electrochemistry of complex 5 showed the same type and number of species observed in complex 3a: Co^IIIPc⁻²/Co^IIPc⁻² (E_p = +0.59 V versus Ag|AgCl), Co^IIPc⁻²/Co^IPc⁻² (E_½ = −0.26 V versus Ag|AgCl) and Co^IPc⁻²/Co^IPc⁻³ (E_½ = −1.39 V versus Ag|AgCl) species. These processes were confirmed using spectroelectrochemistry.     

UV-Visible and IR Spectroelectrochemical Properties of V2O5 Crystalline Films Charged/Discharged in Extended Potential Range

Electrochemical properties of amorphous and crystalline V₂O₅ films, dip-coated from V-oxoisopropoxide sols and thermally treated at various temperatures (100, 150, 200 and 300°C), have been studied in extended potential range, i.e. from 1.4 to –1.6 V vs. Ag/AgCl in 1M LiClO₄/propylen carbonate (PC) electrolyte. The formation of various lithiated (-, -, - and -Li _x V₂O₅) phases was correlated with the values of insertion coefficient x obtained from cyclic voltammograms (CV) of crystalline V₂O₅ films (300°C). Reversible charging was observed when films were cycled up to –1.0 V vs. Ag/AgCl, while the extension of the potential to –1.3 V vs. Ag/AgCl change the CV of films irreversibly. Charging of crystalline V₂O₅ films was followed by the help of in-situ UV-visible spectroscopy, that revealed the intensity variations of the polaron absorption above 600 nm and the presence of the absorbing V³⁺ species between 550 and 650 nm. Ex-situ IR spectra of the crystalline films charged/discharged at –1.6V/1.4V vs. Ag/AgCl confirmed the amorphisation of the films' structure.     

Tetraanions of acepleiadylene and pyrene? An electrochemical study

Acepleiadylene can be electrochemically reduced to its tetraanion at -57°C using THF as solvent and LiBPh₄ as supporting electrolyte.(E₁^o = ?1.85V, E₂^o = ?2.51V, E₃^o = ?3.11V, E₄^o = 3.14V vs. Ag/AgCl).All attemps to generate the tetraanion of the isoelectronic pyrene under different conditions failed.     

Ag/ZnO Catalysts with Different ZnO Nanostructures for Non‐enzymatic Detection of Urea

Silver coated ZnO nanorods and nanoflakes with different crystallographic orientations were synthesized by a combination of sputter deposition and solution growth process. Catalytic properties of morphology‐dependent Ag/ZnO nanostructures were then investigated for urea sensors without enzyme. Ag/ZnO nanorods on carbon electrodes exhibit a higher catalytic activity and an improved efficiency than Ag/ZnO nanoflakes on carbon electrodes. Ag/ZnO nanorod catalysts with more electrochemically surface area (169 cm² mg^?1) on carbon electrode facilitate urea electrooxidation due to easier electron transfer, which further promotes the urea electrolysis. The Ag/ZnO nanorod catalysts also show a significant reduction in the onset voltage (0.410 V vs. Ag/AgCl) and an increase in the current density (12.0 mA cm^?2 mg^?1) at 0.55 V vs Ag/AgCl. The results on urea electrooxidation show that Ag/ZnO nanostructures can be a potential catalyst for non‐enzymatic biosensors and fuel cells.     

Prussian blue solid-state films and membranes as potassium ion-selective electrodes

The use of thin films of Prussian blue and heterogeneous Prussian blue membranes as potassium ion-selective electrodes was investigated. All of the heavier group I cations and NH⁺₄ interfere strongly but there is relatively good selectivity towards Na⁺ with a selectivity coefficient of ca. 5 × 10^?3. The thin-film measurements, based on Prussian blue deposited on platinum, involve conditioning the electrode to a fixed potential according to the method used by Engel and Grabner for copper hexacyanoferrate(III) films. The membrane electrodes were based on mixing Prussian blue with polymeric supporting films such as polystyrene and epoxy. A particularly simple practical configuration involves Prussian blue membranes deposited directly on copper conductors where one membrane serves as a reference electrode. A reversible cell, without liquid junction, is formed with Prussian blue and Ag/AgCl electrodes and this serves as a means for determining an accurate value for the standard reduction potential of Prussian blue, which is found to be 0.238 V vs. Ag/AgCl at 25 °C.     

Electrochemical Fabrication and Properties of Highly Ordered Fe‐Doped TiO2 Nanotubes

Highly‐ordered Fe‐doped TiO₂ nanotubes (TiO₂nts) were fabricated by anodization of co‐sputtered Ti–Fe thin films in a glycerol electrolyte containing NH₄F. The as‐sputtered Ti–Fe thin films correspond to a solid solution of Ti and Fe according to X‐ray diffraction. The Fe‐doped TiO₂nts were studied in terms of composition, morphology and structure. The characterization included scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, X‐ray diffraction, UV/Vis spectroscopy, X‐ray photoelectron spectroscopy and Mott–Schottky analysis. As a result of the Fe doping, an indirect bandgap of 3.0 eV was estimated using Tauc’s plot, and this substantial red‐shift extends its photoresponse to visible light. From the Mott–Schottky analysis, the flat‐band potential (E_fb) and the charge carrier concentration (N_D) were determined to be ?0.95 V vs Ag/AgCl and 5.0 ×10¹⁹ cm^?3 respectively for the Fe‐doped TiO₂nts, whilst for the undoped TiO₂nts, E_fb of ?0.85 V vs Ag/AgCl and N_D of 6.5×10¹⁹ cm^?3 were obtained.     

The voltammetric behaviour of solid 2,2-diphenyl-1-picrylhydrazyl (DPPH) microparticles

The electrochemical behaviour of 2,2-diphenyl-1-picrylhydrazyl (DPPH) microparticles, attached to a graphite electrode and adjacent to an aqueous electrolyte solution, has been studied by cyclic voltammetry. DPPH exhibits one reversible redox couple with a formal potential of 0.340 V versus Ag|AgCl (pH=7.0). At more positive potentials, a redox couple appears with a formal potential E_f=0.733 V versus Ag|AgCl. The oxidation at this potential is followed by an irreversible chemical reaction generating a product which gives a redox couple with a formal potential at 0.177 V versus Ag|AgCl. The reduction process of this couple is followed by a slow chemical reaction in the course of which DPPH is reformed.     

Tunning of Templated CuWO4 Nanorods Arrays Thickness to Improve Photoanode Water Splitting

The fabrication of the photoanode of the n-type CuWO₄ nanorod arrays was successfully carried out through electrochemical deposition using anodic aluminum oxide (AAO) control templates and for the first time produced distinct gaps between the nanorod arrays. The effectiveness and efficiency of the resulting deposition was shown by the performance of the photoelectrochemical (PEC) procedure with a current density of 1.02 mA cm⁻² with irradiation using standard AM 1.5G solar simulator and electron changed radiation of 0.72% with a bias potential of 0.71 V (vs. Ag/AgCl). The gap between each nanorod indicated an optimization of the electrolyte penetration on the interface, which resulted in the expansion of the current density as much as 0.5 × 10²⁴ cm⁻³ with a flat band potential of 0.14 V vs. Ag/AgCl and also a peak quantum efficiency of wavelength 410 nm. Thus, also indicating the gaps between the nanorod arrays is a promising structure to optimize the performance of the PEC water splitting procedure as a sustainable energy source.     

Redox properties of bis(1,10-phenanthroline)-(pyridine)ruthenium(II) complexes

The redox properties of a series of [Ru(phen)₂(py)X]ⁿ⁺ cations (X = pyridine, NH₃, Cl, Br, I, CN, SCN, N₃ and NO₂) have been investigated in acctonitrile. Two reversible reduction steps are seen at ? 1.35 and ? 1.6 V vs Ag/AgCl; the invariance of these processes with X-group is indicative of electron addition to molecular orbitals mainly of phenanthroline ligand π^* origin. Irreversible multi-electron reductions follow below ? 2.20 V. The Ru(II)/Ru(III) couple is seen as a reversible wave near + 0.8 V vs the normal hydrogen electrode, from calibration with ferrocene, except in the cases of the NO₂ and SCN complexes, where rapid reactions involving these ligands occur.     

Determination of trace amounts of 3,4-dichloroaniline by high-performance liquid chromatography with amperometric detection and its application to pesticide residue analysis

Summary High-performance liquid chromatography with amperometric detection was used for the determination of trace amounts of 3,4-dichloroaniline. The latter was separated with Nucleosil C₁₈ as stationary phase and methanolwater (70:30 V/V) containing 0.05 mol/l ammonium acetate as eluent. The voltage of the working electrode (glassy carbon) was set at +960 mV vs. Ag/AgCl. The linear dynamic range between limiting current and concentration was about 1×10² (0.2–20 ng) and the minimum detectable amount was 0.2 ng. This method was applied to the determination of trace amounts of linuron and free 3,4-dichloroaniline in potatoes. The minimum quantitative level was 0.01 ppm. The method requires less clean-up steps than the GC and HPLC methods (using UV detection).