Retardation of Permanganate-Initiated Polymerization of Acrylonitrile by Phenol

The mechanism and kinetics of the retardation of the permanganate-initiated polymerization of acrylonitrile by phenol have been studied in the temperature range of 30 to 45°C. The effect of monomer, metal ion, phenol, sulfuric acid, organic solvents, and some inorganic salts on the polymerization has been studied. The most remarkable observation in the present investigation was the negative intercept obtained from a plot of [M]/R_p versus 1/[M] of the rate mechanism, This observation appears to be a general phenomenon for all inhibiting substrates. A reaction mechanism has been suggested and a suitable rate law has been proposed.     

Vinyl polymerization: Kinetics of Ce(IV)–acetophenone-initiated polymerization of acrylonitrile in acetic–sulfuric acid mixtures

The polymerization of acrylonitrile (M) initiated by the Ce(IV)–acetophenone (AP) redox pair has been studied in acetic–sulfuric acid mixtures in a nitrogen atmosphere. The rate of polymerization is proportional to [M]^3/2, [AP]^1/2 and [Ce(IV)]^1/2. The rate of disappearance of ceric ion,–R_Ce, is proportional to [AP], [M], and [Ce(IV)]. The effect of certain salts, solvent, acid and temperature on both the rates have been investigated. A suitable kinetic scheme has been proposed, and the composite rate constants k_p ²(k/k/_t) and k₀/k_i are reported.     

Cyclic acetal-photosensitized polymerization. II. Photopolymerization of styrene in the presence of various monocyclic acetals

The polymerization of styrene (St) in benzene solution in the presence of 1,3-dioxane (DON), 1,3-dioxepane (DOP), trioxane (TRON), or tetraoxane (TEON) by means of photoirradiation of the system at 40°C has been studied kinetically from the standpoint of photosensitized polymerization. The rate of photosensitized polymerization R_p increased in the order: DOP < DON < TRON < TEON, as shown by the rate constant of decomposition of cyclic acetals, and then could be expressed by R_p = k[monocyclic acetal]^0.5[St]^1.0. The polymerization was confirmed to proceed via a radical mechanism.     

Effects of macromolecular matrix on the process of radical polymerization of ionizable monomers

Radical polymerization of methacrylic acid (MAA) and acrylic acid (AA) in the presence of a positively charged macromolecular matrix was studied. In the presence of a matrix, the rates of polymerization were remarkably increased, especially in high pH region. This suggests that electrostatic interaction between the macromolecular matrix and the growing chains and/or the monomer molecules plays an important role in the process of polymerization reaction. The kinetic orders were greatly influenced by the relative matrix concentration (PC) as follows: for (PC)₀ > [M]₀, R_p = k[M]^0.9 [PC]_0.3 [I]^0.8≤ [M]₀ R_p = k[M]^0.3[PC]⁰[I]^0,8 where [M] and [I] are monomer and initiator concentration, respectively, and k is a constant. The mechanism of the interaction of matrix with monomer and/or growing chains in the process of the propagation is discussed. The complex formed in the matrix polymerization could be easily made into fiber by spinning.     

Effect of diffusion on rates and molecular weights in graft polymerization

A theoretical analysis has been made of the graft polymerization process in terms of the quantitative interrelationship between the initiation rate R_i, the k_p/k_t^1/ ratio of the monomer, the equilibrium solubility M of the monomer in the polymer, the polymer film thickness L, and the diffusivity D of the monomer in the polymer. It is shown how the values of these parameters in any grafting system interact to lead to diffusion-controlled graft polymerization. Whether graft polymerization is diffusion-free or diffusion-controlled depends on the values of K_p, d, k_p/k_p^1/2, and L as gathered in the parameter A = [(K_p/k_t^1/2)R_i, D,/^1/2] L/2. When the values of the various terms are such that A is less than 0.1 (i.e., D is large while R_i, k_p, and L are small), the reaction is diffusion-free. When A is greater than 3 (i.e., D is small while R_i, k_p, and L are large), the reaction is diffusion-controlled. The derived equations showing the relationship between kinetic and diffusional parameters are theoretically applicable to all grafting systems, i.e., for all monomer-polymer combinations under all conditions of reaction temperature, radiation intensity and polymer film thickness. The theoretical analysis has been verified for the rate and degree of polymerization for the radiation-induced graft polymerization of styrene to polyethylene.     

New coordination catalysts based on rare earth compounds for polymerization of 1-octene

The study of rare earth coordination catalysts for polymerization of 1-octene has been successfully carried out for the first time. Some features and kinetic behavior of polymerization of 1-octene by Nd(naph)₃–AIEt₃ catalyst system in tetrachloro-methane are described. The overall polymerization activation energy E_a measured was 74.5 kJ/mol and the rate equation could be expressed as R_p = k_p [Nd] [M] (k_p = 3.21 × 10^?3 L/mol s, at 50°C). The catalytic activity of various rare earth elements in Ln (naph)₃ and ligands in NdL₃ for the polymerization was compared. A 1-octene oligomer with double bonds was obtained. It is either a white or pale yellow waxy semi-solid. Its number-average molecular weight is about 10³ and the molecular weight distribution is less than 2.     

Kinetics of polymerization of N-carboxy amino acid anhydride in dimethyl sulfoxide

Various kinds of NCA's were polymerized in dimethyl sulfoxide (DMSO). DL -Alanine NCA polymerized at a fast rate without initiator, the rate being represented by R_p1 = k[M]^1/2. When the polymerization was carried out in chloroform in the presence of DMSO, the rate was represented by the equation, R_p2 = K₂[M][DMSO]^1/2. Glycine NCA and DL -α-amino-n-butyric acid NCA also polymerized at a fast rate in DMSO without initiator. On the other hand, N-methylglycine NCA, DL - and L -valine NCA and DL - and L -leucine NCA did not polymerize in DMSO without initiator.     

Studies on the polymerization of methyl methacrylate activated by azobisisobutyramidine

Kinetic studies on methyl methacrylate polymerization were carried out with watersoluble 2,2′-azobisisobutyramidine (ABA). The rate of polymerization was proportional to the square root of the initiator concentration in the solvents chloroform, methanol, and dimethyl sulfoxide (DMSO), which confirms the bimolecular nature of the termination reaction. The monomer exponent was unity in chloroform but in methanol and DMSO the rate of polymerization passed through a maximum when plotted against the monmer concentration. This behavior in methanol has been attributed to be due to the enhanced rate of production of radical with increasing proportion of methanol. The rate of decomposition of the ABA has been observed to be faster in methanol than in chloroform. The situation becomes more complicated with DMSO, which was found to reduce the value of δ = (2k_t)^1/2/k_p in methyl methacrylate polymerization. The rate of polymerization was observed to be highly dependent on the nature of the solvent, the rate increasing with increased electrophilicity of the solvent. The dependence of R_p on the solvent has been explained in the light of the stabilization of the transition state due to increased solvation of the basic amidine group of the initiator with the increased electrophilicity of the solvent.     

Vinyl polymerization initiated by peroxydiphosphate. V. Polymerization of acrylonitrile initiated by peroxydiphosphate-cyclohexanol redox system in the presence of silver ion

The polymerization of acrylonitrile was carried out using peroxydiphosphate-cyclohexanol redox system in the presence of silver ion. The rate of polymerization increases with increasing peroxydiphosphate concentration and the initiator exponent was computed to be 0.5. The rate of polymerization increases with increasing monomer concentration and the monomer exponent was computed to be unity. The plot of R_p vs [Ag⁺]^1/2 was linear, indicating 0.5 order with respect to [Ag⁺]. The reaction was carried out at three different temperatures and the overall activation energy was calculated to be 7.60 kcal/mol. The effect of certain surfactants on the rate of polymerization has been investigated and a suitable kinetic scheme has been pictured.     

Cyclic acetal-photosensitized polymerization. VIII. Photopolymerizations of diallylidene pentaerythritol and its derivatives

The photopolymerization of diallylidene pentaerythritol (DAPE) was carried out in benzene at 40°C without the use of the usual initiator. DAPE was polymerized with the ester radical generated from DAPE by photoirradiation. To investigate the effect of dimethyl groups at the α,α- or β,β-positions of vinyl groups on the polymerization, photopolymerizations of dimethallylidene pentaerythritol (DMPE) and dicrotylidene pentaerythritol (DCPE) were carried out and kinetically studied from the standpoint of the degradative chain transfer by the allylidene group and cyclization by two double bonds. The results can be summarized as follows: (1) The relation between the rate of polymerization, R_p, and the monomer concentration [M] can be expressed as [M]/R_p = (A[M] + B)/(2[M] + C), where A, B, and C are constants. (2) The ratios of the rate constant of unimolecular cyclization to the total rate constants of bimolecular propagation and the chain transfer of uncyclized radical were estimated as 1.12, 0.26, and 0.16 mole dm^?3 for DAPE, DMPE, and DCPE, respectively; the cyclizations hardly took place. (3) The rate of polymerization and the molecular weight of the polymer were small because of the degradative chain transfer by the allylidene group.     

A novel palladium catalyst for the polymerization of propargyl alcohol

Homogeneous polymerization of propargyl alcohol (OHP) with Pd (C?CCH₂OH)₂(PPh₃)₂ [Pd?C] catalyst in CHCl₃-CH₃OH mixed solvent system has been investigated. [Pd?C] was found to be a novel effective catalyst for the OHP polymerization. Some features, kinetic behavior, and effect of solvent for the OHP polymerization are described and discussed. The overall polymerization activation energy was found to be 75.6kJ/mol and the rate equation can be expressed as R_p = k_p[OHP] [Pd?C]^0.7, where k_p = 3.14 × 10^-4 L^0.7/ mol^0.7 S (60°C). Polypropargyl alcohol (POHP) obtained is a brown powder with a number-average molecular weight (M?_n) of 10³-2 × 10³, and soluble in MeOH, DMF, and DMSO. Conducting properties of the resulting POHP were investigated. © 1994 John Wiley & Sons, Inc.     

Effect of LiClO4 on the radical polymerization of Di-2-[2-(2-methoxyethoxy)ethoxy]ethyl itaconate

The effect of LiClO₄ on the polymerization of di-2-[2-(2-methoxyethoxy)ethoxy]ethyl itaconate (DMEI) with dimethyl 2,2′-azobisisobutyrate (MAIB) was investigated in methyl ethyl ketone (MEK) kinetically and by ESR. The polymerization rate (R_p) at 50°C, where the concentrations of DMEI and MAIB were 1.00 and 5.00 × 10⁻² mol/L, increased with increasing [LiClO₄]. Marked acceleration was observed at higher [LiClO₄]s than 1.0 mol/L. The molecular weight of resulting polymer (ca. 10,000) was relatively insensitive to [LiClO₄], indicating occurrence of chain transfer. IR analysis of mixtures of LiClO₄/DMEI and LiClO₄/poly(DMEI) indicated complexation of LiClO₄ with DMEI and its polymer. The rate constants of propagation (k_p) and termination (k_t) were determined by ESR. k_p (1.7–10.5 L/mol s at 50°C) increased with [LiClO₄]. k_t (5.2–1.0 × 10⁴ L/mol s at 50°C) showed remarkable decrease at higher [LiClO₄]s than 1.0 mol/L. R_p of polymerization of equimolar complex of LiClO₄/DMEI with MAIB at 50°C in MEK was expressed by R_p = k[MAIB]^0.5[DMEI]^2.4. k_p increased and k_t decreased with [DMEI]. The activation energies of overall polymerization, propagation and termination were estimated to be 34.5, 8.0, and 59.4 kJ/mol. Copolymerization of DMEI with styrene was also profoundly affected by the presence of LiClO₄. Such large effects of LiClO₄ on the homo- and copolymerization of DMEI are explicable in term of association of LiClO₄-complexed DMEI monomers. © 1997 John Wiley & Sons, Inc.     

Kinetic and ESR studies on the radical polymerization of Di-n-butyl itaconate in benzene

The polymerization of di-n-butyl itaconate (DBI) intiated with AIBN was kinetically investigated in benezene. The polymerization rate (R_p) was expressed by: R_p = k[AIBN]^0.5[DBI]^1.7. The polymerization showed a considerably low overall activation energy of 15.3 kcal/mol. The initiator efficiency of AIBN in this system decreased with increasing DBI concentration, ranging from 0.34 to 0.55°C, which is ascribable to viscosity effect due to the monomer. From an ESR study, the polymerization system was found to involve two kinds of persistent radicals, namely, primary propagating ( III ) and propagating ( I ) radicals. The relative concentration of III to I increased with decreasing monomer concentration. Azo-nitrile initiators such as AVN and ACN similarly produced two persistent radicals, while MAIB, DBPO, and PBO yielded only propagating radical I as persistent. The MAIB-initiated polymerization of DBI was also performed in benzene. Similar kinetic features were observed, that is, a higher dependence of R_p on the DBI concentration and a low overall activation energy (14.4 kcal/mol). The following rate equation was obtained at 50°C:R_p = k[MAIB]^0.5[DBI]^1.6. The initiator efficiency of MAIB decreased with increasing DBI concentration, ranging from 0.32 to 0.53 at 50°C. The concentration of propagating radical I was determined by ESR at 50 and 61°C, from which k_p and k_t were estimated. The k_p value increased with increasing monomer concentration, while the k_t one decreased with the DBI concentration. These values are much lower compared with those of MMA.     

Effect of amines on the ceric ion-initiated polymerization of vinyl monomers. II. Polymerization of acrylonitrile by ceric ion in presence of various substituted amines

The effect of various substituted amines on the polymerization of acrylonitrile initiated by ceric ammonium sulfate has been studied in aqueous solution at 30°C. It was found that the secondary and tertiary amines considerably increased the rate of polymerization, whereas the primary amines seemed to have no effect at all. From the kinetic studies it was found that the overall polymerization rate R_p is independent of ceric ion concentration and can be expressed by the equation: R_p = k₁ [amine] [monomer] + k₂[monomer]², where k₁ and k₂ are constants (involving different rate constants). The accelerating effect of the amines was attributed to a redox reaction between the ceric ion and the amine involving a single electron transfer, the relative activity of the different amines being thus dependent on the relative electron-donating tendency of the substituents present in the amine. The mechanism of the polymerization is discussed on the basis of these results, and various kinetic constants are evaluated.     

Solvent effect on the radical polymerization of di-n-butyl itaconate

Solvent effect on the polymerization of di-n-butyl itaconate (DBI) with dimethyl azobisisobutyrate (MAIB) was investigated at 50 and 61°C. The solvents used were found to affect significantly the polymerization. The polymerization rate (R_p) and the molecular weight of the resulting polymer are lower in more polar solvents. The initiation rate (R_i) by MAIB, however, shows a trend of being rather higher in polar solvents. The stationary state concentration of propagating poly(DBI) radical was determined by ESR in seven solvents. The rate constants of propagation (k_p) and termination (k_t) were evaluated by using R_p, R_i, and the polymer radical concentration observed. The k_p value decreases fairly with increasing polarity of the solvent used, whereas k_t is not so influenced by the solvents. The solvent effect on k_p is explained in terms of a difference in the environment around the terminal radical center of the growing chain. Copolymerization of DBI with styrene (St) was also examined in three solvents with different physical properties. The poly(DBI) radical shows a lower reactivity toward St in a more polar solvent.     

Studies of the polymerization of diallyl compounds. VII. Kinetics of the polymerization of diallyl esters of aliphatic dicarboxylic acids

Radical polymerization studies on diallyl oxalate (DAO), diallyl malonate (DAM), diallyl succinate (DASu), diallyl adipate (DAA), and diallyl sebacate (DAS) have been conducted kinetically from the standpoint of cyclopolymerization. Benzoyl peroxide was employed as the initiator. The initial overall rate of polymerization, R_p was not proportional to the square root or the first power of the initiator concentration, [I]. But R_p/[I]^1/2 and [I]^1/2 bore a linear relationship, provided the monomer concentration was kept constant. The residual unsaturation of the polymers decreased with decreasing monomer concentration. The ratio of the rate constant of the unimolecular cyclization reaction to that of the bimolecular propagation reaction of the uncyclized radical, K_c, was evaluated from the above relationship between the residual unsaturation and the monomer concentration at 60°C. The K_c values obtained were 3.6, 3.2, 2.8, 2.5, and 1.2 mole/l. for DAO, DAM, DASu, DAA, and DAS, respectively. The overall activation energies of polymerization were found to be 21.1 (DAO), 24.2 (DAM), 21.7 (DASu), 22.0 (DAA), and 22.2 (DAS) kcal/mole.     

Free-radical polymerization of vinyl ferrocene

The results of quantitative studies of the rates of free-radical polymerization of vinyl ferrocene indicate that the latter has polymerization characteristics similar to those of styrene. The rates of homopolymerization of these two monomers in benzene at 70°C. were measured with the use of azobisisobutyronitrile as catalyst. The rate constants (k = R_p/[M][I]^1/2) are k_VF = (1.1 ? 1.8) × 10^?4, k_STY = 1.65 × 10^?4. Small amounts of vinyl ferrocene and styrene have similar effects on the rates of polymerizations of methyl methacrylate and ethyl acrylate and on the molecular weights of the resulting polymer. Polystyrene and poly(vinyl ferrocene) with similar molecular weights are isolated from polymerizations carried out under identical conditions. The rates of copolymerization of vinyl ferrocene—methyl methacrylate, vinyl ferrocene—styrene, and styrene—methyl methacrylate were determined by following the disappearance of monomers by means of gas chromatographic analyses. The relative reactivity for vinyl ferrocene is slightly lower than that for styrene.     

Free-ionic polymerization of isobutyl vinyl ether by radiation

Radiation-induced free-ionic polymerization of isobutyl vinyl ether in bulk system has been studied by dilatometry and electrical conductivity measurement. Some refinements in kinetic treatment of estimate the propagation rate constant k_p from the rate of polymerization and steady-state conductivity were attempted. Polymerization of superdried monomer which gave a half-power dose-rate dependence of R_p was carried out at 0, 25, and 50°C. The k_p value obtained at 25°C and an activation energy for propagation were estimated as 1.2 ± 0.4 × 10⁵ I./mole-sec and 9.6 ± 2.8 kcal/mole, respectively. In isobutyl vinyl ether, a propagation reaction in free-ionic mechanism was found to be characterized with a high frequency factor and presumably higher activation energy, compared with ion-pair mechanism. Discussions were also made as to several contrasting behaviors between the polymerization of alkyl vinyl ethers and other vinyl monomers as styrene both in free-ion and ion-pair mechanisms.     

Molecular weight distribution in radiation-induced polymerization. I. γ-radiation-induced free-radical polymerization of liquid styrene

The kinetics of γ-radiation-induced free-radical polymerization of styrene were studied over the temperature range 0–50°C at radiation intensities of 9.5 × 10⁴, 3.1 × 10⁵, 4.0 × 10⁵, and 1.0 × 10⁶ rad/hr. The overall rate of polymerization was found to be proportional to the 0.44–0.49 power of radiation intensity, and the overall activation energy for the radiation-induced free-radical polymerization of styrene was 6.0–6.3 kcal/mole. Values of the kinetic constants, k_p²/k_t and k_trm/k_p, were calculated from the overall polymerization rates and the number-average molecular weights. Gelpermeation chromatography was used to determine the number-average molecular weight M?_n, the weight-average molecular weight M?_w, and the polydispersity ratio M?_w/M?_n, of the product polystyrene. The polydispersity ratios of the radiation-polymerized polystyrene were found to lie between 1.80 and 2.00. Significant differences were observed in the polydispersity ratios of chemically initiated and radiation-induced polystyrenes. The radiation chemical yield, G(styrene), was calculated to be 0.5–0.8.     

Aqueous polymerization of acrylonitrile by ascorbic acid–peroxodisulfate redox system

The polymerization of acrylonitrile initiated by an ascorbic acid–peroxodisulfate redox system was studied in an aqueous solution at 35°C in the presence of air. Molecular oxygen was found to have no effect on the polymerization reaction. An increase in ionic strength slightly increased the rate. The overall rate of polymerization, R_p, showed a square dependence on [monomer] and a half-order dependence on [peroxodisulfate]. A first-order dependence on [ascorbic acid] at low concentrations (<3.0 × 10^?3 mol L^?1) followed by a decrease in R_p at higher concentrations of ascorbic acid (>3.0 × 10^?3 mol L^?1) was also noted. R_p remained unchanged up to 40°C and showed a decline thereafter. Addition of catalytic amounts of cupric ions decreased the rate whereas ferric ions were found to increase the rate. Added sulfuric acid in the range (6.0?50.0) × 10^?5 mol L^?1 decreased the R_p.