首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
The coordination chemistry of the water soluble phosphane oxide ligand tris[2‐isopropylimidazol‐4(5)‐yl]phosphane oxide, 4‐TIPOiPr, has been explored. A variety of 3d‐metal halide complexes have been prepared and the crystal structures of the solvates [(4‐TIPOiPr)ZnCl2]·MeOH·1/2dioxane ( 1 ·MeOH·1/2dioxane), [(4‐TIPOiPr)CoCl2]·H2O·2dioxane ( 2 ·H2O·2dioxane) and [(4‐TIPOiPr)2Ni(MeOH)2]Cl2·2MeOH ( 3 ·2MeOH) have been determined. All three structures show unprecedented coordination modes of the 4‐TIPOiPr ligand. Both zinc and cobalt complexes are coordinated in a bidentate κ2N fashion, whereas the nickel atom is coordinated by two ligands in a κN,O mode using one imidazolyl substituent and the P=O oxygen atom.  相似文献   

2.
The mechanism and enantioselectivity of the asymmetric Baeyer–Villiger oxidation reaction between 4‐phenylcyclohexanone and m‐chloroperoxobenzoic acid ( m ‐CPBA ) catalyzed by ScIIIN,N′‐dioxide complexes were investigated theoretically. The calculations indicated that the first step, corresponding to the addition of m ‐CPBA to the carbonyl group of 4‐phenylcyclohexanone, is the rate‐determining step (RDS) for all the pathways studied. The activation barrier of the RDS for the uncatalyzed reaction was predicted to be 189.8 kJ mol?1. The combination of an ScIIIN,N′‐dioxide complex and the m ‐CBA molecule can construct a bifunctional catalyst in which the Lewis acidic ScIII center activates the carbonyl group of 4‐phenylcyclohexanone while m ‐CBA transfers a proton, which lowers the activation barrier of the addition step (RDS) to 86.7 kJ mol?1. The repulsion between the m‐chlorophenyl group of m ‐CPBA and the 2,4,6‐iPr3C6H2 group of the N,N′‐dioxide ligand, as well as the steric hindrance between the phenyl group of 4‐phenylcyclohexanone and the amino acid skeleton of the N,N′‐dioxide ligand, play important roles in the control of the enantioselectivity.  相似文献   

3.
Treatment of pyridine‐stabilized silylene complexes [(η5‐C5Me4R)(CO)2(H)W?SiH(py)(Tsi)] (R=Me, Et; py=pyridine; Tsi=C(SiMe3)3) with an N‐heterocyclic carbene MeIiPr (1,3‐diisopropyl‐4,5‐dimethylimidazol‐2‐ylidene) caused deprotonation to afford anionic silylene complexes [(η5‐C5Me4R)(CO)2W?SiH(Tsi)][HMeIiPr] (R=Me ( 1‐Me ); R=Et ( 1‐Et )). Subsequent oxidation of 1‐Me and 1‐Et with pyridine‐N‐oxide (1 equiv) gave anionic η2‐silaaldehydetungsten complexes [(η5‐C5Me4R)(CO)2W{η2‐O?SiH(Tsi)}][HMeIiPr] (R=Me ( 2‐Me ); R=Et ( 2‐Et )). The formation of an unprecedented W‐Si‐O three‐membered ring was confirmed by X‐ray crystal structure analysis.  相似文献   

4.
The bis(imino)pyridine 2,6‐(2,6‐iPr2‐C6H3N?CPh)2‐C5H3N (iPrBPDI) molybdenum dinitrogen complex, [{(iPrBPDI)Mo(N2)}2211‐N2)] has been prepared and contains both weakly (terminal) and modestly (bridging) activated N2 ligands. Addition of ammonia resulted in sequential N? H bond activations, thus forming bridging parent imido (μ‐NH) ligands with concomitant reduction of one of the imines of the supporting chelate. Using primary and secondary amines, model intermediates have been isolated that highlight the role of metal–ligand cooperativity in NH3 oxidation.  相似文献   

5.
We report a detailed study of the reactions of the Ti?NNCPh2 alkylidene hydrazide functional group in [Cp*Ti{MeC(NiPr)2}(NNCPh2)] ( 8 ) with a variety of unsaturated and saturated substrates. Compound 8 was prepared from [Cp*Ti{MeC(NiPr)2}(NtBu)] and Ph2CNNH2. DFT calculations were used to determine the nature of the bonding for the Ti?NNCPh2 moiety in 8 and in the previously reported [Cp2Ti(NNCPh2)(PMe3)]. Reaction of 8 with CO2 gave dimeric [(Cp*Ti{MeC(NiPr)2}{μ‐OC(NNCPh2)O})2] and the “double‐insertion” dicarboxylate species [Cp*Ti‐{MeC(NiPr)2}{OC(O)N(NCPh2)C(O)O}] through an initial [2+2] cycloaddition product [Cp*Ti{MeC(NiPr)2}{N(NCPh2)C(O)O}], the congener of which could be isolated in the corresponding reaction with CS2. The reaction with isocyanates or isothiocyanates tBuNCO or ArNCE (Ar=Tol or 2,6‐C6H3iPr2; E=O, S) gave either complete NNCPh2 transfer, [2+2] cycloaddition to Ti?Nα or single‐ or double‐substrate insertion into the Ti?Nα bond. The treatment of 8 with isonitriles RNC (R=tBu or Xyl) formed σ‐adducts [Cp*Ti{MeC(NiPr)2}(NNCPh2)(CNR)]. With ArF5CCH (ArF5=C6F5) the [2+2] cycloaddition product [Cp*Ti{MeC(NiPr)2}{N(NCPh2)C(ArF5)C(H)}] was formed, whereas with benzonitriles ArCN (Ar=Ph or ArF5) two equivalents of substrate were coupled in a head‐to‐tail manner across the Ti?Nα bond to form [Cp*Ti{MeC(NiPr)2}{N(NCPh2)C(Ar)NC(Ar)N}]. Treatment of 8 with RSiH3 (R=aryl or Bu) or Ph2SiH2 gave [Cp*Ti{MeC(NiPr)2}{N(SiHRR′)N(CHPh2)}] (R′=H or Ph) through net 1,3‐addition of Si? H to the N? N?CPh2 linkage of 8 , whereas reaction with PhSiH2X (X=Cl, Br) led to the Ti?Nα 1,2‐addition products [Cp*Ti{MeC(NiPr)2}(X){N(NCPh2)SiH2Ph}].  相似文献   

6.
The reaction of 1,3‐diisopropylimidazolin‐2‐ylidene (iPr2Im) with diphenyldichlorosilane (Ph2SiCl2) leads to the adduct (iPr2Im)SiCl2Ph2 1 . Prolonged heating of isolated 1 at 66 °C in THF affords the backbone‐tethered bis(imidazolium) salt [(aHiPr2Im)2SiPh2]2+ 2 Cl? 2 (“a” denotes “abnormal” coordination of the NHC), which can be synthesized in high yields in one step starting from two equivalents of iPr2Im and Ph2SiCl2. Imidazolium salt 2 can be deprotonated in THF at room temperature using sodium hydride as a base and catalytic amounts of sodium tert‐butoxide to give the stable N‐heterocyclic dicarbene (aiPr2Im)2SiPh2 3 , in which two NHCs are backbone‐tethered with a SiPh2 group. This easy‐to‐synthesize dicarbene 3 can be used as a novel ligand type in transition metal chemistry for the preparation of dinuclear NHC complexes, as exemplified by the synthesis of the homodinuclear copper(I) complex [{a(ClCu?iPr2Im)}2SiPh2] 4 .  相似文献   

7.
This contribution reports on a new family of NiII pincer complexes featuring phosphinite and functional imidazolyl arms. The proligands RPIMCHOPR′ react at room temperature with NiII precursors to give the corresponding complexes [(RPIMCOPR′)NiBr], where RPIMCOPRPCP‐{2‐(R′2PO),6‐(R2PC3H2N2)C6H3}, R=iPr, R′=iPr ( 3 b , 84 %) or Ph ( 3 c , 45 %). Selective N‐methylation of the imidazole imine moiety in 3 b by MeOTf (OTf=OSO2CF3) gave the corresponding imidazoliophosphine [(iPrPIMIOCOPiPr)NiBr][OTf], 4 b , in 89 % yield (iPrPIMIOCOPiPrPCP‐{2‐(iPr2PO),6‐(iPr2PC4H5N2)C6H3}). Treating 4 b with NaOEt led to the NHC derivative [(NHCCOPiPr)NiBr], 5 b , in 47 % yield (NHCCOPiPrPCC‐{2‐(iPr2PO),6‐(C4H5N2)C6H3)}). The bromo derivatives 3–5 were then treated with AgOTf in acetonitrile to give the corresponding cationic species [(RPIMCOPR)Ni(MeCN)][OTf] [R=Ph, 6 a (89 %) or iPr, 6 b (90 %)], [(RPIMIOCOPR)Ni(MeCN)][OTf]2 [R=Ph, 7 a (79 %) or iPr, 7 b (88 %)], and [(NHCCOPR)Ni(MeCN)][OTf] [R=Ph, 8 a (85 %) or iPr, 8 b (84 %)]. All new complexes have been characterized by NMR and IR spectroscopy, whereas 3 b , 3 c , 5 b , 6 b , and 8 a were also subjected to X‐ray diffraction studies. The acetonitrile adducts 6 – 8 were further studied by using various theoretical analysis tools. In the presence of excess nitrile and amine, the cationic acetonitrile adducts 6 – 8 catalyze hydroamination of nitriles to give unsymmetrical amidines with catalytic turnover numbers of up to 95.  相似文献   

8.
A MHC6 complex of a platinum group metal with a capped octahedral arrangement of donor atoms around the metal center has been characterized. This osmium compound OsH{κ2C,C‐(PhBIm‐C6H4)}3, which reacts with HBF4 to afford the 14 e? species [Os{κ2C,C‐(PhBIm‐C6H4)}(Ph2BIm)2]BF4 stabilized by two agostic interactions, has been obtained by reaction of OsH6(PiPr3)2 with N,N′‐diphenylbenzimidazolium chloride ([Ph2BImH]Cl) in the presence of NEt3. Its formation takes place through the C,C,C‐pincer compound OsH23C,C,C‐(C6H4‐BIm‐C6H4)}(PiPr3)2, the dihydrogen derivative OsCl{κ2C,C‐(PhBIm‐C6H4)}(η2‐H2)(PiPr3)2, and the five‐coordinate osmium(II) species OsCl{κ2C,C‐(PhBIm‐C6H4)}(PiPr3)2.  相似文献   

9.
《Polyhedron》1995,14(23-24)
New complexes of bivalent nickel with isopropylxanthates and nitrogen-donor ligands of composition [Ni(Prixa)2(L)], [Ni(Prixa)2(L1)2], [Ni(L2)2](Prixa)2, and [Ni(L3)3] (Prixa)2 have been synthesized, where Prixa = i-C3H7OCS2, L = 1,2-diaminopropane (1,2-pn), N,N,N′,N′=tetramethylethylenediamine (tmen) or 4,4′-bipyridine (4,4′-bipy), L1 = pyridine (py), L2 = diethylenetriamine (dien) and L3 = ethylenediamine (en), 1,2-diaminopropane or 1,10-phenanthroline (phen). The compounds have been characterized by elemental analysis, IR and UV-vis spectroscopy, magnetochemical measurements, molar conductivity and thermal analysis. The compounds containing the complex cation have been one-electron irreversibly oxidized using cyclic voltammetry. The crystal and molecular structures of [Ni(Prixa)2(tmen)] and [Ni(phen)3](Prixa)2 have been elucidated.  相似文献   

10.
The new Zirconium(IV) coordination compound [Ph4P]2[(ZrCl4Py)2O] (Ph = phenyl, Py = pyridine) was synthesized by dissolving ZrCl4, [Ph4P]Cl and a stoichiometric amount of NaOH/Na mixture in pyridine or pyridine/organic solvent mixtures. The title phase was obtained as colourless crystals. The crystal structure of [Ph4P]2[(ZrCl4Py)2O] was determined. It crystallizes monoclinic, P21/c, Z = 4, a = 13.412(2), b = 13.461(2), c = 16.442(3) Å, β = 102.72(1)°. The structure consists of isolated tetraphenylphosphonium cations and [(ZrCl4Py)2O]2? complex anions. The centrosymmetric complex anion contains a linear Zr–O–Zr bridge. Each Zr atom is coordinated by one oxygen dianion, the N atom of one pyridine ring and four chloro ligands in a distorted octahedral geometry. The Raman spectrum of [Ph4P]2[(ZrCl4Py)2O] is also reported. Most of the observed frequencies can be assigned to vibrations of the tetraphenylphosphonium cations and the pyridine rings.  相似文献   

11.
Reactive E = C(pp)π-Systems. XLII [1]. Novel Coordination Compounds of 2-(Diisopropylamino)-1-phosphaethyne: [{η4-(iPr2NCP)2}Ni{η2-(iPr2NCP)}], [(Ph3P)2Pt{η2-(iPr2NCP)}], and [Co2(CO)622-(iPr2NCP)}] 2-(Diisopropylamino)-phosphaethyne iPr2N? C?P ( 2 ) reacts with the Ni(0)-complexes [Ni(1,5-cyclooctadiene)2] and [Ni(CO)3(1-azabicyclo[2.2.2]octane)], respectively, to give the novel complex [{η4-(iPr2NCP)2}Ni{η2-(iPr2NCP)}] ( 5 ), with the 1,3-diphosphacyclobutadiene derivative and 2 (side-on) as π-ligands. The molecular structure of 5 determined by X-ray diffraction on single crystals proves the spin systems and rotational barriers deduced from NMR-data (1H, 13C-, 31P). The PC distances of the four-membered ring of 1.817(2) and 1.818(2) Å – as expected – are considerably longer than the PC bond of the η2-coordinated phosphaalkyne 2 [1.671(2) Å]. – In the reactions of 2 with [(Ph3P)2Pt(C2H4)] or [Co2(CO)8] the ligand properties of 2 resemble those of alkynes affording the complexes [(Ph3P)2Pt{η2-(iPr2NCP)}] ( 7 ) with side-on coordinated 2 and [Co2(CO)622-(iPr2NCP)}] with 2 acting as a 4e donor bridge in quantitative yield. In attempts to prepare copper(I) complexes of the aminophosphaalkyne 2 by reaction with CuCl or CuI the only isolable product formed in reasonable amounts under the influence of air and moisture is the 1 λ3, 3 λ5-diphosphetene (iPr2N) ( 10 ) (isolated yield: ca. 20%). The crystal structure analysis of 10 indicates a strong structural relationship to the diamino-2-phosphaallyl cation [Me(iPr2N)]+ ( 12 ), the 1,3-diphosphacyclobutadiene ligand (iPr2NCP)2 in the binuclear complex [{η1, μ2-(iPr2NCP)2}Ni2(CO)6] ( 3a ) as well as to the heterocycles (dme)2LiOE2′ (E′ = S, 11a ; E′ = Se, 11b ) prepared by Becker et al. [11b, 35].  相似文献   

12.
Nickel and palladium methoxides [(iPrPCP)M‐OMe], which contain the iPrPCP pincer ligand, decompose upon heating to give products of different kinds. The palladium derivative cleanly gives the dimeric Pd0 complex [Pd(μ‐iPrPCHP)]2 (iPrPCHP=2,6‐bis(diisopropylphosphinomethyl)phenyl) and formaldehyde. In contrast, decomposition of [(iPrPCP)Ni‐OMe] affords polynuclear carbonyl phosphine complexes. Both decomposition processes are initiated by β‐hydrogen elimination (BHE), but the resulting [(iPrPCP)M‐H] hydrides undergo divergent reaction sequences that ultimately lead to the irreversible breakdown of the pincer units. Whereas the Pd hydride spontaneously experiences reductive C?H coupling, the decay of its Ni analogue is brought about by its reaction with formaldehyde released in the BHE step. Kinetic measurements showed that the BHE reaction is reversible and less favourable for Ni than for Pd for both kinetic and thermodynamic reasons. DFT calculations confirmed the main conclusions of the kinetic studies and provided further insight into the mechanisms of the decomposition reactions.  相似文献   

13.
The portfolio of acyclic diaminocarbenes (ADACs) has been substantially expanded, owing to the synthesis of eleven new formamidinium salts, mostly of the type [(iPr2N)CH(NRR′)][PF6], for use as immediate carbene precursors. The corresponding ADACs (iPr2N)C(NRR′) were sufficiently stable for isolation in the case of NRR′=2‐methylpiperidino ( 13 ), 3‐methylpiperidino ( 14 ), 4‐methylpiperidino ( 15 ), morpholino ( 17 ) and NiPrPh ( 20 ), but had to be trapped in situ in the case of NRR′=2,2,6,6‐tetramethylpiperidino ( 12 ) and NiPrMe ( 19 ). The tetraaryl‐substituted ADACs (Ph2N)2C ( 22 ) and (Ph2N)C[N(C6F5)2] ( 24 ) also could only be generated and trapped in situ. Trapping with elemental selenium was particularly efficient, affording the corresponding selenourea derivative in all cases, whereas trapping with [{Rh(μ‐Cl)(cod)}2] did not work for 12 and 24 . The 77Se NMR chemical shifts, δ(77Se), of the selenourea compounds derived from the new ADACs lie in the range 450–760 ppm, which indicates a much higher electrophilicity and π‐accepting capability of ADACs in comparison with NHCs, which typically exhibit δ(77Se)<200 ppm. The extreme low‐field shift of 758 ppm observed for 12 Se can be rationalised by the results of DFT calculations, which revealed that ADAC 12 has a minimum energy conformation with the 2,2,6,6‐tetramethylpiperidino unit perpendicular to the N2C plane, which suppresses the π donation of this amino group and causes an unusually low LUMO energy and high electrophilicity.  相似文献   

14.
A study of the coordination chemistry of different amidato ligands [(R)N?C(Ph)O] (R=Ph, 2,6‐diisopropylphenyl (Dipp)) at Group 4 metallocenes is presented. The heterometallacyclic complexes [Cp2M(Cl){κ2N,O‐(R)N?C(Ph)O}] M=Zr, R=Dipp ( 1 a ), Ph ( 1 b ); M=Hf, R=Ph ( 2 )) were synthesized by reaction of [Cp2MCl2] with the corresponding deprotonated amides. Complex 1 a was also prepared by direct deprotonation of the amide with Schwartz reagent [Cp2Zr(H)Cl]. Salt metathesis reaction of [Cp2Zr(H)Cl] with deprotonated amide [(Dipp)N?C(Ph)O] gave the zirconocene hydrido complex [Cp2M(H){κ2N,O‐(Dipp)N?C(Ph)O}] ( 3 ). Reaction of 1 a with Mg did not result in the desired Zr(III) complex but in formation of Mg complex [(py)3Mg(Cl) {κ2N,O‐(Dipp)N?C(Ph)O}] ( 4 ; py=pyridine). The paramagnetic complexes [Cp′2Ti{κ2N,O‐(R)N?C(Ph)O}] (Cp′=Cp, R=Ph ( 7 a ); Cp′=Cp, R=Dipp ( 7 b ); Cp′=Cp*, R=Ph ( 8 )) were prepared by the reaction of the known titanocene alkyne complexes [Cp2′Ti(η2‐Me3SiC2SiMe3)] (Cp′=Cp ( 5 ), Cp′=Cp* ( 6 )) with the corresponding amides. Complexes 1 a , 2 , 3 , 4 , 7 a , 7 b , and 8 were characterized by X‐ray crystallography. The structure and bonding of complexes 7 a and 8 were also characterized by EPR spectroscopy.  相似文献   

15.
A variety of very bulky amido magnesium iodide complexes, LMgI(solvent)0/1 and [LMg(μ‐I)(solvent)0/1]2 (L=‐N(Ar)(SiR3); Ar=C6H2{C(H)Ph2}2R′‐2,6,4; R=Me, Pri, Ph, or OBut; R′=Pri or Me) have been prepared by three synthetic routes. Structurally characterized examples of these materials include the first unsolvated amido magnesium halide complexes, such as [LMg(μ‐I)]2 (R=Me, R′=Pri). Reductions of several such complexes with KC8 in the absence of coordinating solvents have afforded the first two‐coordinate magnesium(I) dimers, LMg?MgL (R=Me, Pri or Ph; R′=Pri, or Me), in low to good yields. Reductions of two of the precursor complexes in the presence of THF have given the related THF adduct complexes, L(THF)Mg?Mg(THF)L (R=Me; R′=Pri) and LMg?Mg(THF)L (R=Pri; R′=Me) in trace yields. The X‐ray crystal structures of all magnesium(I) complexes were obtained. DFT calculations on the unsolvated examples reveal their Mg?Mg bonds to be covalent and of high s‐character, while Ph???Mg bonding interactions in the compounds were found to be weak at best.  相似文献   

16.
The molecule of N,N′‐bis(4‐pyridylmethyl)oxalamide, C14H14N4O2, (I) or 4py‐ox, has an inversion center in the middle of the oxalamide group. Adjacent molecules are then linked through intermolecular N—H...N and C—H...O hydrogen bonds, forming an extended supramolecular network. 4,4′‐{[Oxalylbis(azanediyl)]dimethylene}dipyridinium dinitrate, C14H16N4O22+·2NO3, (II), contains a diprotonated 4py‐ox cation and two nitrate counter‐anions. Each nitrate ion is hydrogen bonded to four 4py‐ox cations via intermolecular N—H...O and C—H...O interactions. Adjacent 4py‐ox cations are linked through weak C—H...O hydrogen bonding between an α‐pyridinium C atom and an oxalamide O atom, forming a two‐dimensional extended supramolecular network.  相似文献   

17.
赵蔚  钱延龙  黄吉玲 《中国化学》2004,22(7):732-737
Introduction Oxidation was a very important reaction both in synthetic pathways and in industrial processes. Metal-catalyzed oxidation provided excellent alternatives in synthetic processes. However, molecular oxygen has been applied only in a limited number of metal-catalyzed oxidations, because it was very difficult to activate molecular oxygen and most of transition metal complexes were sensitive to oxygen. It was noted that metal-catalyzed Baeyer-Villiger oxidation was a convenient method…  相似文献   

18.
The reaction of one equivalent of LAlH2 ( 1 ; L=HC(CMeNAr)2, Ar=2,6‐iPr2C6H3, β‐diketiminate ligand) with two equivalents of 2‐mercapto‐4,6‐dimethylpyrimidine hydrate resulted in LAl[(μ‐S)(m‐C4N2H)(CH2)2]2 ( 2 ) in good yield. Similarly, when N‐2‐pyridylsalicylideneamine, N‐(2,6‐diisopropylphenyl)salicylaldimine, and ethyl 3‐amino‐4,5,6,7‐tetrahydrobenzo[b]thiophene‐2‐carboxylate were used as starting materials, the corresponding products LAl[(μ‐O)(o‐C6H4)CN(C5NH4)]2 ( 3 ), LAlH[(μ‐O)(o‐C4H4)CN(2,6‐iPr2C6H3)] ( 4 ), and LAl[(μ‐NH)(o‐C8SH8)(COOC2H5)]2 ( 5 ) were isolated. Compounds 2 – 5 were characterized by 1H and 13C NMR spectroscopy as well as by single‐crystal X‐ray structural analysis. Surprisingly, compounds 2 – 5 exhibit good catalytic activity in addition reactions of aldehydes with trimethylsilyl cyanide (TMSCN).  相似文献   

19.
The structures of two salts of flunarizine, namely 1‐bis[(4‐fluorophenyl)methyl]‐4‐[(2E)‐3‐phenylprop‐2‐en‐1‐yl]piperazine, C26H26F2N2, are reported. In flunarizinium nicotinate {systematic name: 4‐bis[(4‐fluorophenyl)methyl]‐1‐[(2E)‐3‐phenylprop‐2‐en‐1‐yl]piperazin‐1‐ium pyridine‐3‐carboxylate}, C26H27F2N2+·C6H4NO2, (I), the two ionic components are linked by a short charge‐assisted N—H...O hydrogen bond. The ion pairs are linked into a three‐dimensional framework structure by three independent C—H...O hydrogen bonds, augmented by C—H...π(arene) hydrogen bonds and an aromatic π–π stacking interaction. In flunarizinediium bis(4‐toluenesulfonate) dihydrate {systematic name: 1‐[bis(4‐fluorophenyl)methyl]‐4‐[(2E)‐3‐phenylprop‐2‐en‐1‐yl]piperazine‐1,4‐diium bis(4‐methylbenzenesulfonate) dihydrate}, C26H28F2N22+·2C7H7O3S·2H2O, (II), one of the anions is disordered over two sites with occupancies of 0.832 (6) and 0.168 (6). The five independent components are linked into ribbons by two independent N—H...O hydrogen bonds and four independent O—H...O hydrogen bonds, and these ribbons are linked to form a three‐dimensional framework by two independent C—H...O hydrogen bonds, but C—H...π(arene) hydrogen bonds and aromatic π–π stacking interactions are absent from the structure of (II). Comparisons are made with some related structures.  相似文献   

20.
The first four‐coordinate methanediide/alkyl lutetium complex (BODDI)Lu2(CH2SiMe3)22‐CHSiMe3)(THF)2 (BODDI=ArNC(Me)CHCOCHC(Me)NAr, Ar=2,6‐iPr2C6H3) ( 1 ) was synthesized by a thermolysis methodology through α‐H abstraction from a Lu–CH2SiMe3 group. Complex 1 reacted with equimolar 2,6‐iPrC6H3NH2 and Ph2C?O to give the corresponding lutetium bridging imido and oxo complexes (BODDI)Lu2(CH2SiMe3)22N‐2,6‐iPr2C6H3)(THF)2 ( 2 ) and (BODDI)Lu2(CH2SiMe3)22‐O)(THF)2 ( 3 ). Treatment of 3 with Ph2C?O (4 equiv) caused a rare insertion of Lu–μ2‐O bond into the C?O group to afford a diphenylmethyl diolate complex 4 . Reaction of 1 with PhN=C?O (2 equiv) led to the migration of SiMe3 to the amido nitrogen atom to give complex (BODDI)Lu2(CH2SiMe3)2‐μ‐{PhNC(O)CHC(O)NPh(SiMe3)‐κ3N,O,O}(THF) ( 5 ). Reaction of 1 with tBuN?C formed an unprecedented product (BODDI)Lu2(CH2SiMe3){μ2‐[η22tBuNC(=CH2)SiMe2CHC?NtBu‐κ1N]}(tBuN?C)2 ( 6 ) through a cascade reaction of N?C bond insertion, sequential cyclometalative γ‐(sp3)‐H activation, C?C bond formation, and rearrangement of the newly formed carbene intermediate. The possible mechanistic pathways between 1 , PhN?C?O, and tBuN?C were elucidated by DFT calculations.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号