Spiro linked compounds for use as active materials in organic light emitting diodes

Spiro-linkage of low molecular weight entities as a new structural concept for the design of new active materials for electroluminescent applications is presented. These spiro linked compounds result in nonpolymeric organic glasses with high thermal stability as can be derived from their high glass transition temperatures (T_g), and characterized by differential scanning calorimetry. Blue emitters based on spiro linked oligophenyles are presented. These compounds are soluble in common organic solvents and show high photoluminescence quantum efficiency in the solid state and high morphologic stability with glass transition temperatures up to 250°C. Charge transport materials based on spiro linked versions of 2-(4-biphenyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole (PBD) for electron transport, and spiro linked versions of triphenyldiamin derivatives (TPD) for hole transport show improved morphologic properties with nearly unchanged electronic properties compared to the parent compounds. High quality amorphous films can be prepared with the spiro compounds by vapor deposition as well as by simple spin coating.     

MALDI imaging mass spectrometry of lipids by adding lithium salts to the matrix solution

Mass spectrometry imaging of lipids using MALDI–TOF/TOF mass spectrometers is of growing interest for chemical mapping of organic compounds at the surface of tissue sections. Many efforts have been devoted to the best matrix choice and deposition technique. Nevertheless, the identification of lipid species desorbed from tissue sections remains problematic. It is now well-known that protonated, sodium- and potassium-cationized lipids are detected from biological samples, thus complicating the data analysis. A new sample preparation method is proposed, involving the use of lithium salts in the matrix solution in order to simplify the mass spectra with only lithium-cationized molecules instead of a mixture of various cationized species. Five different lithium salts were tested. Among them, lithium trifluoroacetate and lithium iodide merged the different lipid adducts into one single lithium-cationized species. An optimized sample preparation protocol demonstrated that the lithium trifluoroacetate salt slightly increased desorption of phosphatidylcholines. Mass spectrometry images acquired on rat brain tissue sections by adding lithium trifluoroacetate showed the best results in terms of image contrast. Moreover, more structurally relevant fragments were generated by tandem mass spectrometry when analyzing lithium-cationized species.     

有机玻璃断裂韧性断面形态组份结构关系的研究

测定了有机玻璃的抗裂纹增长因子K_(1C)与材料组份、拉力机夹头速度的关系。发现增塑剂和交联剂对抗裂纹性能的影响,可从聚合物分子运动能力对裂纹端点塑性屈服过程的影响说明。在对断面形态、断面层厚度、折光指数以及K_(1C)值与拉力机夹头速度关系研究之后,认为用“撕布”模式和次级断裂模式分别解释慢裂纹、快裂纹扩展过程中的实验现象是合适的。     

Precise,non-destructive determination of fluorine by 14-MeV neutron activation analysis

A procedure is described for the precise determination of fluorine in organic and metal-organic compounds by 14-MeV neutron activation analysis using the reaction: ¹⁹F(n,2n)¹⁸F (β +, t_{$\text{1}\text{2}$} = 110 min).A relative standard deviation of better than ±0.5% is achieved by irradiating samples and standard simultaneously. Uniform neutron exposures were ensured by rotating the samples during irradiation. Positron emitters of short half-life are allowed to decay before counting. In metal-organic compounds, Sc, Zn, Ga and Ag cause the most serious interference; for organic compounds the method is rapid, and specific for fluorine.     

Determination of the main component in high-purity organic substances: Current status and prospects

The current status of the determination of the purity of high-purity organic substances using direct and indirect chromatographic methods is discussed. It is shown that the results of the chromatographic determination of the main component in high-purity organic materials are generally ambiguous and unreliable. The possibility of determining the purity of organic compounds using an elemental analyzer of C, H, and N without involving standard samples of analytes is examined; the advantages and drawbacks of this approach are discussed. It is demonstrated experimentally by the example of several nitrogenated compounds that the main component can be determined with an error no worse than 0.6 rel. %, whereas the error of element (nitrogen) determination in the molecule does not exceed the permissible error of elemental analysis.     

E.V. Shpol’skii and his effect

The article covers the history of the discovery of the Shpol’skii effect, on which a sensitive luminescence method for determining some organic compounds and analyzing their mixtures is based.     

On the correlation between emitter heating current and emitter temperature in field desorption mass spectrometry

Calibration curves have been established that give an estimate of the temperature in the emission region of high temperature activated field desorption emitters. Two characteristic types of field anodes have been investigated: (1) emitter wires carrying microneedles of 25 to 30 μm length, preferentially used for field desorption of organic compounds; (2) emitters with microneedles of 50 to 60 μm length, which are used for the investigations of polymers by pyrolysis field desorption mass spectrometry.     

有机电致发光红色发光材料研究进展

本文总结了近年来有机金属配合物、分子内电荷转移化合物、稠环芳香类化合物以及齐聚物等几类有机电致发光红色发光材料的研究进展,详细介绍了它们在有机电致发光器件中的应用,并对有机电致发光红色发光材料未来的研究方向作了展望.     

Comparative study of solvent extraction and thermal desorption methods for determining a wide range of volatile organic compounds in ambient air

This paper compares two analytical methods for determining levels of 90 volatile organic compounds (VOCs) commonly found in industrial and urban atmospheres. Both methods are based on two official methods for determining benzene levels and involve collecting samples by active adsorptive enrichment on solid sorbents. The first method involves solvent extraction and uses activated charcoal as a sorbent. After sampling, the sorbent is extracted with 1 mL of carbon disulfide and then 1 μL of the extract is analysed in a GC-MS. The second method involves thermal desorption (TD) and uses Tenax TA and Carbograph 1TD as sorbents, which allows the whole sample to be analysed. In general, the thermal desorption method showed the best repetitivity and recovery and the lowest limit of detection and quantification for all target compounds. Because of its lower sensitivity, the solvent extraction method needs the preconcentration of large sample volumes of air (720 L vs. 2.64 L for the thermal desorption method) to yield similar limits of detection.The performance of both methods in real samples was tested in a location near to a petrochemical complex. The results of the 24-h samples for the solvent extraction method were compared with the average of 12 2-h samples for the TD method. In some cases, both methods found differences in the VOC concentrations, especially in those compounds whose concentrations fluctuate significantly during the day.     

Strategies for the identification of non-polar toxicants in aqueous environmental samples using toxicity-based fractionation and gas chromatography-mass spectrometry.

Toxicity-based fractionation is a useful tool for the isolation and identification of non-polar organic compounds that are present at toxic concentrations in aqueous environmental samples. Methods for isolating such toxicants from the aqueous sample matrix and techniques for fractionating the compounds for the purpose of reducing the complexity of the sample matrix and thus facilitating identification are evaluated. Strategies for analyzing gas chromatographic-mass spectrometric data and confirming toxicant identification are presented. Studies that use toxicity-based fractionation for identifying the cause of toxicity in aqueous environmental samples such as municipal and industrial wastewater treatment plant effluents and ambient waters are discussed.     

Compound-specific 81Br/79Br analysis by capillary gas chromatography/multicollector inductively coupled plasma mass spectrometry

Brominated organic compounds (BOCs) are of great interest in atmospheric chemistry, natural products, geochemistry, and marine chemistry. The Br isotope ratios ((81)Br and (79)Br; average (81)Br/(79)Br = 0.97277) have significant potential for the study of the source, transport, and fate of these compounds. Currently, there is no published method for determining the Br isotopic content of BOCs in complex mixtures. To measure the ratios of stable Br in BOCs on a compound-specific basis, we assembled a gas chromatography/multicollector inductively coupled plasma mass spectrometry (GC/MCICPMS) system. Background signals, the formation of Ar dimers from organic hydrogen, and the solvent peak did not affect the results. The analysis of three brominated benzenes revealed that 0.3 per thousand precision can be attained when 0.3 nmol of Br are injected. For samples larger than 0.3 nmol Br, the isotopic precision was within a factor of 3 of the shot-noise limit, which is the best possible statistical precision attainable avoiding all other sources of noise.     

An apparatus for determining the purity of organic compounds

An apparatus is described for determining with an accuracy of 10 per cent the total amount of impurities in small (0.05 cm³) samples of organic compounds, containing more than 98 mole per cent of the main component. A simple method for calculating the degree of purity, applicable to Skau's method, is proposed. A correction for the heat of melting of eutectic mixtures formed by the main component with impurities is introduced.     

Light-dependent isomeric effects of polycyclic aromatic hydrocarbons on the predication of DNA cleavage factor efficiency

PAHs, short for polycyclic aromatic hydrocarbons, are a ubiquitous group of chemically related, environmentally persistent organic compounds having diverse structures and varied toxicity. They have been shown to cause mutagenic and carcinogenic effects on organisms and are quite immunosuppressive. Time-dependent density functional theory (TD-DFT) offers a practical means of understanding the behavior of excitation energies for PAHs. Here, we examined the performance of the long-range corrected Coulomb-attenuating functional (CAM-B3LYP) in relation to four different basis sets, determining which basis set compliments the functional better in identifying the most reactive atomic site on six isomeric PAH compounds. Condensed Fukui function indices were used to compare the performance of applied basis sets in identifying the most reactive atomic site on six isomeric PAHs compounds, assessing which basis set would be more appropriate in determining the site where free-radical formation would occur after light irradiation. Dunning’s correlation consistent triple-zeta (cc-pVTZ) basis set was determined to have the best PAH characterization performance, concluding the need for application of a higher-level basis set with the long-range corrected Coulomb-attenuating functional. Although each compound was a structural isomer of the other, the reactive atomic sites varied for each molecule with the use of an applied basis set. It was concluded that structural shape has some influence on the calculation of PAH characteristics. Lastly, in order to predict DNA single-stranded cleavage factor for the compounds proposed here, we have used the quantitative structure-activity relationship (QSAR). The cleavage factor values for the set of aromatic molecules with similar structures have been collected from the literature for a total number of 22 compounds.     

Fast Electrochemical Characterization of Historical Glasses Using Carbon Screen‐Printed Electrodes and Ultrasonic Assisted Sampling

A new method for lead oxide (PbO) analysis in glasses, using a carbon screen printed electrode (SPE) is proposed. A suspension of the powdered glass sample in nitric acid is prepared using an ultrasonic probe, 100 µL of slurry are deposited on the SPE and the voltammetric measurement is carried out. Structural information of PbO in the glass matrix is obtained by CV. Lead quantification is performed by DPV. In the best conditions a LOD of 2.30 wt% of PbO was obtained. The method has been applied with good results in the analysis of historical glasses samples.     

Recent Advancements in and the Future of Organic Emitters: TADF‐ and RTP‐Active Multifunctional Organic Materials

Organic emitting compounds that are based on π‐conjugated skeletons have emerged as promising next‐generation materials for application in optoelectronic devices. In this Minireview, recent advances in the development of organic emitters that irradiate room‐temperature phosphorescence and/or thermally activated delayed fluorescence with extraordinary luminescence properties, such as aggregation‐induced emission, mechanochromic luminescence, and circularly polarized luminescence, are discussed.     

Combining Carbazole Building Blocks and ν-DABNA Heteroatom Alignment for a Double Boron-Embedded MR-TADF Emitter with Improved Performance

Building blocks and heteroatom alignments are two determining factors in designing multiple resonance (MR)-type thermally activated delayed fluorescence (TADF) emitters. Carbazole-fused MR emitters, represented by CzBN derivatives, and the heteroatom alignments of ν-DABNA are two star series of MR-TADF emitters that show impressive performances from the aspects of building blocks and heteroatom alignments, respectively. Herein, a novel CzBN analog, Π-CzBN, featuring ν-DABNA heteroatom alignment is developed via facile one-shot lithium-free borylation. Π-CzBN exhibits superior photophysical properties with a photoluminescence quantum yield close to 100 % and narrowband sky blue emission with a full width at half maximum (FWHM) of 16 nm/85 meV. It also gives efficient TADF properties with a small singlet-triplet energy offset of 40 meV and a fast reverse intersystem crossing rate of 2.9×10⁵ s⁻¹. The optimized OLED using Π-CzBN as the emitter achieves an exceptional external quantum efficiency of 39.3 % with a low efficiency roll-off of 20 % at 1000 cd m⁻² and a narrowband emission at 495 nm with FWHM of 21 nm/106 meV, making it one of the best reported devices based on MR emitters with comprehensive performance.     

Molecular Design Strategy for Orange Red Thermally Activated Delayed Fluorescence Emitters in Organic Light-Emitting Diodes (OLEDs)

Pure organic molecules based thermally activated delayed fluorescence (TADF) emitters have been successfully developed in recent years for their propitious application in highly efficient organic light emitting diodes (OLEDs). In the case of orange red emitters, the non-radiative process is known to be a serious issue due to its lower lying singlet energy level. However, recent studies indicate that there are tremendous efforts put to develop efficient orange red TADF emitters. In addition, the external quantum efficiency (EQE) of heteroaromatic based orange red TADF OLEDs surpassed 30 %. Such heteroaromatic type emitters showed wide emission spectra; therefore, more attention is being paid to develop highly efficient orange red TADF emitters along with good color purity. Herein, the recent progress of orange red TADF emitters based on molecular structures, such as cyanobenzene, heteroaromatic, naphthalimide, and boron-based acceptors, are reviewed. Further, our insight on these acceptors has been provided by their photophysical studies and device performances. Future perspectives of orange red TADF emitters for real practical applications are discussed.     

Rapid Simultaneous Determination of Volatile Organic Compounds in Mattress Fabric by Headspace–Gas Chromatography–Mass Spectrometry

An analytical method for simultaneously determining 32 volatile organic compounds in mattress fabrics based on static headspace coupled to gas chromatography and mass spectrometry detection was established. Samples were cut into 5?×?5?mm small pieces and placed in a 20?mL headspace vial at 90° for 30?min. To achieve the optimum conditions for the analysis, several parameters including the heating temperature, heating time, sample weight, and injection time were investigated. The results demonstrated that the most important parameter influencing the sensitivity of the analysis was the heating temperature. The optimum method showed good linearities with correlation coefficients ranged from 0.9944 to 0.9998. The limits of detection and quantification for the target compounds were in the ranges of 0.004–0.032 and 0.013–0.099?µg/?g, respectively. The method was successfully applied to determine the volatile organic compounds in six categories of mattress fabrics. The results showed that some volatile organic compounds were found, such as naphthalene, hexadecane, and 1,4-diisopropylbenzene. Moreover, the concentrations of 32 volatile organic compounds decreased following the order of jute, terylene, polyester, velboa, nylon, and cotton samples in the study. These results indicated that the method is fast, accurate, and successful for determining volatile organic compounds in mattress fabrics.     

Multi-resonant thermally activated delayed fluorescence emitters based on tetracoordinate boron-containing PAHs: colour tuning based on the nature of chelates

Multi-resonant thermally activated delayed fluorescence (MR-TADF) materials have attracted considerable attention recently. The molecular design frequently incorporates cycloboration. However, to the best of our knowledge MR-TADF compounds containing nitrogen chelated to boron are still unknown. Reported herein is a new class of tetracoordinate boron-containing MR-TADF emitters bearing C^N^C- and N^N^N-chelating ligands. We demonstrate that the replacement of the B–C covalent bond in the C^N^C-chelating ligand by the B–N covalent bond affords an isomer, which dramatically influences the optoelectronic properties of the molecule. The resulting N^N^N-chelating compounds show bathochromically shifted absorption and emission spectra relative to C^N^C-chelating compounds. The incorporation of a tert-butylcarbazole group at the 4-position of the pyridine significantly enhances both the thermal stability and the reverse intersystem crossing rate, yet has a negligible effect on emission properties. Consequently, high-performance hyperfluorescent organic light-emitting diodes (HF-OLEDs) that utilize these molecules as green and yellow-green emitters show a maximum external quantum efficiency (η_ext) of 11.5% and 25.1%, and a suppressed efficiency roll-off with an η_ext of 10.2% and 18.7% at a luminance of 1000 cd m⁻², respectively.

A new class of tetra-coordinate boron-containing MR-TADF emitters and their corresponding high-performance hyperfluorescent organic light-emitting diodes have been successfully achieved.