[4+2] Cycloaddition of 1-phosphono-1,3-butadiene with azo- and nitroso-heterodienophiles

Under microwave activation, diethyl 1-phosphono-1,3-butadiene (1) reacted with t-butyl azodicarboxylate (2) and o-nitrosotoluene (5) to furnish quantitatively [4+2] cycloadducts, 3-phosphono-3,6-dihydro-1,2-pyridazine (3) and 6-phosphono-3,6-dihydro-1,2-oxazine (6), respectively. Selective oxidation and/or reduction of 6 led to functionalized δ-aminophosphonic derivatives in cyclic (7, 8) and aliphatic series (9, 10). Intermediate 10 may be cyclized into 2-phosphono-2,5-dihydro-1-pyrrole (12).     

The stereospecific preparation of two perfluoro-1,3-butadiene synthons; (E)-1-trimethylsilyl-1,2,3,4,4-pentafluoro-1,3-butadiene and (E)-1-tributylstannyl-1,2,3,4,4-pentafluoro-1,3-butadiene

(E)-1-Trimethylsilyl-1,2,3,4,4-pentafluoro-1,3-butadiene (1) can be stereospecifically prepared by Pd(0)/CuI catalyzed cross-coupling of (Z)-1-tributylstannyl-1,2-difluoro-2-trimethylsilylethene with iodotrifluoroethene. The corresponding (E)-1-tributylstannyl-1,2,3,4,4-pentafluoro-1,3-butadiene can be prepared via the stereospecific conversion of 1 with Bu₃SnOSnBu₃/KF (catalysis) to the corresponding vinylstannane.     

Synthesis and characterization of mercury(II) complexes with 2-styryl-1,3-benzothiazole (sb). Presence of two differently coordinated Hg(II) ions in the dinuclear complex Hg2Cl4(sb)3. Structural characterization of 2-styryl-1,3-benzothiazole and some of its derivatives

The molecular and crystal structures of the following compounds 2-styryl-1,3-benzothiazole, sb, (1), Hg₂Cl₄(sb)₃ (2), 1,3-bis(1,3-benzothiazol-2-yl)-2,4-diphenylcyclobutane (3) 1,3-bis(1,3-benzothiazol-2-yl)-2,4-bis(4-chlorophenyl)cyclobutane (4) and HgBr₂(sb)₂ (5) were determined by single-crystal X-ray diffractometry. The crystal structure of 1 consists of discrete sb molecules which are essentially planar. The dimeric molecules of 3 and 4 are characterized by a cyclobutane ring. In both isolated complexes 2 and 5, sb acts as a neutral monodentate ligand coordinated to the mercury atom through the thiazolyl nitrogen atom. The dinuclear complex 2 is characterized by the unique example of two differently coordinated Hg(II) ions bridged via a non-symmetrical linear Cl⁻ bridge. The first one is coordinated by one terminal and one bridging Cl⁻ ion and two thiazolyl nitrogen atoms in the form of distorted tetrahedron. The second one is bonded to two terminal Cl⁻ ions and the bridging Cl⁻ ion and one thiazolyl nitrogen atom in a 2+2 manner. In complex 5 the Hg(II) ion, which is situated on a crystallographic twofold axis, is tetrahedrally coordinated by two Br⁻ ions and two thiazolyl nitrogen atoms. Both complexes are characterized by stronger mercury-to-halide covalent bonds than mercury-to-nitrogen bonds, which are regarded as contacts shorter than the van der Waals radii sum of the corresponding atoms. The geometry of the sb ligand in both complexes 2 and 5 has not been changed remarkably from that one in the uncoordinated state due to not so strong bonds formation with the Hg(II) ion.     

Rearrangement during halogenation of 2-hydroxy-1,2-diphenylpropan-1-one (α-methylbenzoin)

The reaction of 2-hydroxy-1,2-diphenylpropan-1-one 1 with SOCl₂ or PBr₃ gives, respectively, the 3-chloro- and 3-bromo-1,2-diphenylpropan-1-ones 4 and 6. The expected 2-chloro- and 2-bromo-1,2-diphenylpropan-1-ones 2 and 5 can, however, be formed by treatment of 1,2-diphenylpropan-1-one 8 with Cl₂ or Br₂/AlCl₃. The four halogenated products are characterised by ¹H and ¹³C NMR spectroscopy for the first time.     

The first synthesis and X-ray structures of polyfluorinated 1,2-, 2,3- and 2,4a-dihydro-1,3-diazafluorenes

Acetic acid-catalyzed condensation of 2-amino-3-(1-imino-2,2,2-trifluoroethyl)-1,1,4,5,6,7-hexafluoroindene (1b) with acetone and cyclopentanone gives 5,6,7,8,9,9-hexafluoro-2,2-dimethyl-4-trifluoromethyl-2,3-dihydro-1,3-diazafluorene (2a) and 5,6,7,8,9,9-hexafluoro-4-trifluoromethyl-2,3-dihydro-1,3-diazafluorene-2-spiro-1′-cyclopentane (3a) together with small amounts of 5,6,7,8,9,9-hexafluoro-2,2-dimethyl-4-trifluoromethyl-1,2-dihydro-1,3-diazafluorene (2b) and 5,6,7,8,9,9-hexafluoro-4-trifluoromethyl-1,2-dihydro-1,3-diazafluorene-2-spiro-1′-cyclopentane (3b), respectively. When acted upon by (CH₃)₂SO₄ compounds 2, 3 were converted into corresponding fluorine-containing 1-methyl-1,2-dihydro-1,3-diazafluorenes 6, 7. 4a-Chloro-5,6,7,8,9,9-hexafluoro-2,2-dimethyl-4-trifluoromethyl-2,4a-dihydro-1,3-diazafluorene (8) has been synthesized by the interaction of compound 2 with SOCl₂. Solution of compound 2 as well as 8 in CF₃SO₃H-CD₂Cl₂ generated 5,6,7,8,9,9-hexafluoro-2,2-dimethyl-4-trifluoromethyl-1,2,3,4-tetrahydro-1,3-diazafluorene-4-yl cation (2c). The structures of compounds 2, 3, 6-8 have been determined by single crystal X-ray diffraction.     

(Fluorosilyl)ethylenediamines and fluorosilyl-1,3-diaza-2-silacyclopentanes

This paper presents the chemistry of ethylenediamines and fluorosilanes. The synthesis of thermally stable monosilyl (1-5)- and bis(fluorosilyl)ethylenediamines (6) is described. Starting with the dilithium salt of ethylenediamine and F₂Si(CMe₃)₂ the five-membered 1,3-diaza-2-silacyclopentane (8) is obtained. The reaction of tetra- and trifluorosilanes with dilithiated bis(silyl)ethylenediamines leads to the formation of 1,3-diaza-2-fluorosilylsilacyclopentanes (9-14). Fluorosilanes substitute 8 in 1 and 3 positions (15-28). A fluorosilyl-bridged five-membered ring (29) is isolated in the reaction of 1-trimethylsilyl-1,3-diaza-2-silacyclopentane, BuLi and MeSiF₃. In the synthesis of N-fluorosilyl-1,3-diaza-2-silacyclopentanes constitutional isomers were formed (30-33). Quantum-chemical calculations support the isomerisation mechanism. An iminosilane with an SiN double bond is the intermediate product of the rearrangement process.Crystal structures of 7, 13, 20 and 23 are reported.     

Intramolecular hetero-Diels-Alder reaction of 1-oxa-1,3-butadienes with terminal acetylenes in aqueous media using CuI

A new method for the preparation of tetracyclic uracils (oxa-helicene) 4 was developed. The intramolecular hetero-Diels-Alder reaction of 1-oxa-1,3-butadiene 3 and an unactivated alkyne in the presence of CuI led to tetracyclic uracils 4 in aqueous media with good yields. The 1-oxa-1,3-butadiene 3 was prepared through Knoevenagel reaction of O-propargylated salicylaldehyde derivatives and barbituric acid or 1,3-dimethylbarbituric acid.     

Heterocyclic thioamides of copper(I): Synthesis and crystal structures of copper complexes with 1,3-imidazoline-2-thiones in the presence of triphenyl phosphine

Reaction of copper(I) chloride with 1,3-imidazoline-2-thione (imzSH) in the presence of Ph₃P in 1:2:2 or 1:1:2 (M:L:PPh₃) molar ratios yielded a compound of unusual composition, [Cu₂(imzSH)(PPh₃)₄Cl₂] · CH₃OH (1), whose X-ray crystallography has shown that its crystals consist of four coordinated [CuCl(1κS-imzSH)(PPh₃)₂] (1a), and three coordinated [Cu(PPh₃)₂Cl] (1b) independent molecules in the same unit cell. In contrast, crystals of complexes of copper(I) bromide/iodide are formed by single molecules of [CuBr(1κS-imzSH)(PPh₃)₂] · H₂O (2) and [CuI(1κS-imzSH)(PPh₃)₂] (3), respectively, similar to molecule 1a. The related ligand, 1,3-benzimidazoline-2-thione (bzimSH) formed a complex [CuBr(1κS-bzimSH)(PPh₃)₂] · CH₃COCH₃ (4), similar to 2. The formation of 1a and 1b has been also revealed by NMR spectroscopy. The NMR spectra of 2–4 also showed weak signals indicating formation of compounds similar to 1b. It reveals that the lability of the Cu–S bond varies in the order: Cl ? Br ∼ I. Weak interactions {e.g. C–H?π electrons of ring, –NH?halogens/oxygen, C–H?halogens/oxygen, π?π (between rings)} have played an important role in building 2D chains of complexes 1–4.     

Structural properties of new spiro-1,3-propanediaminocyclotriphosphazene derivatives

New 1,3-propanediaminocyclotriphosphazene derivatives (7-17) were synthesized from the reactions of spiro-1,3-propanediaminocyclotriphosphazene, N₃P₃Cl₄[NH(CH₂)₃NH] (1) with the cyclopropanemethylamine (2), cyclohexylamine (3), pyrrolidine (4) cyclohexanol (5), cyclopropylmethanol (6). The structures of the novel compounds (7-17) were characterized by elemental analysis, mass spectrometry, ¹H and ³¹P NMR spectroscopy. The molecular structures of 8, 12 and 13 were determined by X-ray crystallography. The structures of all these three compounds are in the monoclinic crystal system; compounds 8 and 12 have the P21/c space group while compound 13 has the P21/n space group. The ring conformation of the cyclotriphosphazene and other external rings were investigated based on the X-ray crystal structures.     

Selective synthesis of bis[1,2]dithiolo[1,4]thiazines from 4-isopropylamino-5-chloro-1,2-dithiole-3-ones

Reaction of 4-isopropylamino-5-chloro-1,2-dithiole-3-ones 3 and S₂Cl₂ in acetonitrile gave selectively 3-oxo-bis[1,2]dithiolo[1,4]thiazine-5-thiones 1 by the addition of triethylamine and bis[1,2]dithiolo[1,4]thiazine-3,5-diones 5 under the action of formic acid. 3,5-Diones 5 were also obtained by intramolecular cyclization of N,N-bis(5-chloro-3-oxo[1,2]dithiol-4-yl)amines 6 with S₂Cl₂ in the presence of Et₃N.     

Cobalt(II), nickel(II) and zinc(II) coordination compounds derived from aromatic amines

The structural and spectroscopic characterization of coordination compounds of four aromatic amines derived from benzimidazole, 2-aminobenzimidazole (L1), 1-(S-methylcarbodithioate)-2-aminobenzimidazole (L2), 2-(2-aminophenyl)-1H-benzimidazole (L3) and 6,6-dimethyl-5H-benzimidazolyl[1,2-c]quinazoline (L4) are reported. Cobalt(II) [Co(L1)₂(CH₃COO)₂] (1) and nickel(II) [Ni(L1)₂(CH₃COO)₂] (2) acetate coordination compounds of L1 are discussed. The synthesis and the X-ray crystal structure of the new 1-(S-methylcarbodithioate)-2-aminobenzimidazole (L2) is informed, together with its cobalt(II) [Co(L2)₂Cl₂] (3), [Co(L2)₂Br₂] (4) and zinc(II) [Co(L2)₂Cl₂] (5), [Zn(L2)₂Br₂] (6) coordination compounds. In these compounds the imidazolic nitrogen is coordinated to the metal center, while the ArNH₂ and the S-methylcarbodithioate groups do not participate as coordination sites. A co-crystal of L1 and L2 is analyzed. Structural analyses of the coordination compounds of L3 showed that this ligand behaves as a bidentate ligand through the aniline and the imidazole groups forming six membered rings in the cobalt(II) [Co(L3)Cl₂] (7) and zinc(II) [Zn(L3)Cl₂] (8) compounds, as well as the nickel(II) nitrate [Ni(L3)₂(H₂O)₂](NO₃)₂ (9). The quinazoline L4 was produced by insertion of one acetone molecule and water elimination in L3, its X-ray crystal diffraction analysis, as well as that of its zinc(II) coordination compound [Zn(L4)₂Cl₂] (10), are discussed.     

Calix[4]arenes containing urea and crown/urea moieties: effects of the crown ether unit and Na towards anion binding ability

Calix[4]arenes containing urea and crown/urea moieties, 7 and 10, respectively have been synthesized. ¹H NMR titrations of 7 and 10 with anions in DMSO-d₆ showed that 7 and 10 formed complexes with Cl⁻, Br⁻, NO₃⁻ and H₂PO₄⁻ to a different extent. The association constants of 7 and 10 towards anions were calculated and found to vary as H₂PO₄⁻>Cl⁻>Br⁻>NO₃⁻. However, compared to 7 the presence of the crown unit in 10 resulted in a slightly higher affinity to Cl⁻ and Br⁻, but a lower affinity to H₂PO₄⁻. Upon addition of Na⁺, the binding ability of 10 towards H₂PO₄⁻ is increased due to ion-pair enhancement.     

Polymerization of 1,3-Butadiene Catalyzed by Cobalt(Ⅱ) and Nickel(Ⅱ) Complexes Bearing Pyridine-2-imidate Ligands

Cobalt and nickel complexes (1a-1d and 2a-2d, respectively) supported by 2-imidate-pyridine ligands were synthesized and used for 1,3-butadiene polymerization. The complexes were characterized by IR and element analysis, and complex 1a was further characterized by single-crystal X-ray diffraction. The solid state structure of complex 1a displayed a distorted tetrahedral geometry. Upon activation with ethylaluminum sesquichloride (EASC), all the complexes showed high activities toward 1,3-butadiene polymerization. The cobalt complexes produced polymers with high cis-1,4 contents and high molecular weights, while the nickel complexes displayed low cis-1,4 selectivity and the resulting polymers had low molecular weights. The catalytic activities of the complexes highly depended on the ligand structure. With the increment of polymerization temperature, the cis-1,4 content and the molecular weight of the resulting polymer decreased.     

Synthesis of novel heterocyclic fused 1,3-diazabuta-1,3-dienes and accompanying rearrangements in their cycloaddition reactions with ketenes: synthesis of heterocyclic fused pyrimidinone derivatives

The reactions of 1,3-diazabuta-1,3-dienes 1 with 2-aminothiophenol have been shown to result in excellent yields of N-benzothiazol-2-yl-N′-aryl benzamidines 2. Their regioselective [4+2] cycloadditions with various ketenes are shown to yield novel benzothiazolo pyrimidinones 4. A similar and convenient protocol for the synthesis of bisthiosubstituted 1,3-diazabuta-1,3-dienes 8 and 9 and interesting rearrangements accompanying their [4+2] cycloadditions with a number of ketenes are described.     

Regioselectivity in the 1,3-dipolar cycloaddition of adamantylidenefulvene and its modification by inclusion in cyclodextrins' solutions

The 1,3-dipolar cycloaddition of adamantylidenefulvene (1) with 2 equiv of nitrile oxides 2a-d gave 1/1 cycloadducts, 3a-d and 4a-d, as the major products, and four other 1/2 minor cycloadducts 5-8a,b. The ratios of 1/1 cycloadducts 3a-d to 4a-d in THF solution were about 1/1 in the four different nitrile oxides 2a-d studied and microwave was found to accelerate the reactions and enhance their yields. It is noteworthy that the regioselectivity of 3a/4a was enhanced to 71/29 in β-cyclodextrin (β-CD) aqueous solution compared to that of 40/60 in the absence of β-CD. The regioselectivity of 3b/4b was further enhanced to 99/1 when 4-tert-butylphenyl hydroximinoyl chloride (9b) was complexed with β-CD and then proceeded to react with 1; this is in sharp contrast with that of 33/67 in the absence of β-CD. The binding constant of 1·β-CD in acetone-d₆/D₂O (1/1) was determined to be 188±9 M⁻¹ by ¹H NMR titration experiments. The binding mode of 1·β-CD was further determined by ROESY experiment. Furthermore, molecular dynamic simulations were carried out to provide information of the complexation modes of 1·β-CD, 3a·β-CD, 4a·β-CD, 9a·β-CD, and 9b·β-CD. It was found that both steric and electrostatic effects play important roles in determining the regio- and stereochemistry of 1,3-dipolar cycloaddition of 1. Finally, β-CD is shown to serve as a chiral shift reagent to differentiate the enantiomers of 4a in ¹H NMR.     

Symmetry of chloronium ions from ionic reaction of chlorine, chlorine monofluoride gas, and chlorine monofluoride complex with terminal alkenes

Ionic chlorination of 1H,1H,7H-perfluorohept-1-ene (2) and heptafluoropropyl trifluorovinyl ether (4) with chlorine monofluoride (ClF) gas in aprotic solvent; and alkenes 2, 1H-perfluorohept-1-ene (3E), and 4 with chlorine (Cl₂) in protic solvent were investigated. Regiochemical data from SN₂-like ring-opening of the intermediate was used to predict the symmetry of the chloronium ion. The chloronium ions from perfluorohydroalkene 2 with two terminal hydrogens were found to be unsymmetrical with positive charge localized on the terminal carbon. However, reaction of ClF_(g) with 3E containing a single terminal fluorine atom gave data suggesting a symmetrical chloronium ion. Alkene 4 contains a heptafluoropropyl ether group that stabilizes positive charge on the number-2 carbon and it is reactive enough to give products with the sluggish ClF complex generated in situ. Reactive eletrophiles ClF_(g), Cl_2(g), or the less reactive ClF complex, give an unsymmetrical chloromium ion with charge localized on the internal number-2 carbon.     

Synthesis, structures, luminescent and magnetic properties of four coordination polymers with the flexible 1,3-phenylenediacetate ligands

Four coordination polymers, [Zn(pda)(bpy)(H₂O)]_n·nH₂O (1), [Cd(pda)(prz)(H₂O)]_n (2), [Co₃(μ₃-OH)₂(pda)₂(pyz)]_n·2nH₂O (3) and [Pr₂(pda)₃(H₂O)₂]_n (4) (H₂pda=1,3-phenylendiacetic acid, bpy=4,4′-bipyridine, prz=piperazine and pyz=pyrazine) have been hydrothermally synthesized and characterized. Complex 1 is a 1D wheel-like chain structure, which is further extended into a 3D metal-organic supramolecular framework by H-bonds and π-π stacking interactions. Complex 2 is a 1D ladder-like chain structure, which is also further extended into a 3D metal-organic supramolecular framework by H-bonds. Complex 3 possess a 2D sheet structure with infrequent two pairs of double-helix chains. Complex 4 features a 3D structure. Both 1 and 2 display strong blue fluorescent emission at room temperature. Magnetic susceptibility measurements of complexes 3 and 4 exhibit antiferromagnetic interactions between the nearest metal ions, with C=9.99 and 3.43 cm³ mol⁻¹ K, and θ=−23.9 and −46.3 K, respectively.     

1,3-Dipolar cycloadditions of MeOPEG-bounded azides

1,3-Dipolar cycloadditions of MeOPEG-supported azide 2 with a variety of dipolarophiles have been studied. 1-MeOPEG-supported 1,2,3-triazoles 4 and 5, 1,2,3,4-tetrazoles 12 and aziridine 14 were obtained in nearly quantitative yields. The removal of the MeOPEG moiety from the 1,2,3-triazole nucleus was achieved by acidic cleavage of the cycloadduct mixtures 4 and 5 giving 4- and 5-substituted-1,2,3-triazoles 6 and 7.     

Synthesis of polyfluorophenyl substituted-4,5-dihydropyrazole derivatives via 1,3-dipolar cycloaddition of nitrile imine with ethyl acrylate

Oxidation of aldehyde 4-chloro-2,3,5,6-tetrafluorophenylhydrazones (1) with [bis(acetoxy)iodo]benzene leads to the formation of nitrile imines (2) which reacted in situ with ethyl acrylate to produce 3-substituted-1-(4-chloro-2,3,5,6-tetrafluorophenyl)-5-ethoxycarbonyl-4,5-dihydropyrazoles (3) in moderate to good yields. The structures of new compounds were fully confirmed by their spectral data, elemental analyses and X-ray diffraction (XRD) analysis. A plausible reaction mechanism for the synthesis of title compounds is presented.     

1,3-Dilithio-2-(diphenylmethylene)propane

The reaction of 2,2-diphenylmethylenecyclopropane (5) with an excess of lithium and a catalytic amount of DTBB (4 mol %) in THF at −78 °C leads to the formation of dilithiated species 6-8 by reductive opening of the cyclopropane ring. Further reaction of these intermediates with different electrophiles [E = H₂O, D₂O, CH₂CMeCH₂Cl, Me₃SiCl, Me₃SiCH₂Cl, t-BuCHO, Me₂CO, Et₂CO, n-Pr₂CO, i-Pr₂CO, t-Bu₂CO, (CH₂)₅CO, Ph₂CO and adamantanone] is highly regioselective, yielding exclusively the corresponding products 9, after hydrolysis with water. However, when 3-chloro-2-(chloromethyl)propene (14) is used as a dielectrophile, the cyclisation to give a six-membered ring takes place through intermediate 6, giving compound 16 as the only reaction product.