Distance Measurement on an Endogenous Membrane Transporter in E. coli Cells and Native Membranes Using EPR Spectroscopy

Membrane proteins may be influenced by the environment, and they may be unstable in detergents or fail to crystallize. As a result, approaches to characterize structures in a native environment are highly desirable. Here, we report a novel general strategy for precise distance measurements on outer membrane proteins in whole Escherichia coli cells and isolated outer membranes. The cobalamin transporter BtuB was overexpressed and spin‐labeled in whole cells and outer membranes and interspin distances were measured to a spin‐labeled cobalamin using pulse EPR spectroscopy. A comparative analysis of the data reveals a similar interspin distance between whole cells, outer membranes, and synthetic vesicles. This approach provides an elegant way to study conformational changes or protein–protein/ligand interactions at surface‐exposed sites of membrane protein complexes in whole cells and native membranes, and provides a method to validate outer membrane protein structures in their native environment.     

Direct reconstitution of plasma membrane lipids and proteins in nanotube-vesicle networks

We demonstrate here that nanotube-vesicle networks can be constructed directly from plasma membranes of cultured cells. We used a combination of dithiothreitol (DTT) and formaldehyde to produce micron-sized plasma membrane vesicles that were subsequently shaped into networks using micromanipulation methods previously used on purely synthetic systems. Only a single cell is required to derive material sufficient to build a small network. This protocol covers the advantages of reconstitution in vesicles, such as full control over the solution environment, while keeping the proteins in their original surroundings with the proper orientation. Furthermore, control of membrane protein and lipid content in the networks is achievable by employing different cell types, for example, by overexpression of a desired protein or the use of specialized cell-types as sources for rare proteins and lipids. In general, the method provides simple accessibility for functional studies of plasma membrane constituents. Specifically, it provides a direct means to functionalize nanotube-vesicle networks with desired proteins and lipids for studies of transport activity both across membranes (protein-mediated) and across nanotubes (diffusion), and substrate conversion down to the single-molecule limit. Nanotube-vesicle networks can adopt different geometries and topologies and undergo shape changes at will, providing a flexible system for changing the physical and chemical environment around, for example, a membrane protein. Furthermore, the method offers unique possibilities for extracting membrane and protein material for nanotechnological sensor and analytical devices based on lipid membrane networks.     

Synthesis of lipidated green fluorescent protein and its incorporation in supported lipid bilayers

Herein we report a semisynthetic method of producing membrane-anchored proteins. Ligation of synthetic lipids with designed anchor structures to proteins was performed using native chemical ligation (NCL) of a C-terminal peptide thioester and an N-terminal cysteine lipid. This strategy mimics the natural glycosylphosphatidylinositol (GPI) linkage found in many natural membrane-associated proteins; however, the synthetic method utilizes simple lipid anchors without glycans. Synthetically lipidated recombinant green fluorescent protein (GFP) was shown to be stably anchored to the membrane, and its lateral fluidity was quantitatively characterized by direct fluorescence imaging in supported membranes. Circumventing the steps of purification from native cell membranes, this methodology facilitates the reconstitution of membrane-associated proteins.     

Self-assembly of solid-supported membranes using a triggered fusion of phospholipid-enriched proteoliposomes prepared from the inner mitochondrial membrane

A general procedure for the formation ofsolid-supported artificial membranes containing transmembrane proteins is reported. The main objective was to directly use the pool of proteins of the native biomembrane (here the inner membrane from mitochondria of human carcinogenic hepatic cells) and to avoid purification steps with detergent. Proteoliposomes of phospholipid-enriched inner membranes from mitochondria were tethered and fused onto a tailored surface via a streptavidin link. The failure of some preliminary experiments on membrane formation was attributed to strong nonspecific interactions between the solid surface and the protuberant hydrophilic parts of the transmembrane complexes. The correct loading of uniform membranes was performed after optimization of a tailored surface, covered with a grafted short-chain poly(ethylene glycol), so that nonspecific interactions are reduced. Step-by-step assembly of the structure and triggered fusion of the immobilized proteoliposomes were monitored by surface plasmon resonance and fluorescence photobleaching recovery, respectively. The long-range lateral diffusion coefficient (at 22 degrees C) for a fluorescent lipid varies from 2.5 x 10(-8) cm2 s(-1) for a tethered lipid bilayer without protein to 10(-9) cm2 s(-1) for a tethered membrane containing the transmembrane proteins of the respiratory chain at a protein area fraction of about 15%. The decrease in the diffusion coefficient in the tethered membrane with increase in protein area fraction was too pronounced to be fully explained by the theoretical models of obstructed lateral diffusion. Covalent tethering links with the solid are certainly involved in the decrease of the overall lateral mobility of the components in the supported membrane at the highest protein-to-lipid ratios.     

Micelles,Bicelles, and Nanodiscs: Comparing the Impact of Membrane Mimetics on Membrane Protein Backbone Dynamics

Detergents are often used to investigate the structure and dynamics of membrane proteins. Whereas the structural integrity seems to be preserved in detergents for many membrane proteins, their functional activity is frequently compromised, but can be restored in a lipid environment. Herein we show with per‐residue resolution that while OmpX forms a stable β‐barrel in DPC detergent micelles, DHPC/DMPC bicelles, and DMPC nanodiscs, the pico‐ to nanosecond and micro‐ to millisecond motions differ substantially between the detergent and lipid environment. In particular for the β‐strands, there is pronounced dynamic variability in the lipid environment, which appears to be suppressed in micelles. This unexpected complex and membrane‐mimetic‐dependent dynamic behavior indicates that the frequent loss of membrane protein activity in detergents might be related to reduced internal dynamics and that membrane protein activity correlates with lipid flexibility.     

Synthetic mimics of mammalian cell surface receptors: prosthetic molecules that augment living cells

Specific receptors on the surface of mammalian cells actively internalize cell-impermeable ligands by receptor-mediated endocytosis. To mimic these internalizing receptors, my laboratory is studying artificial cell surface receptors that comprise N-alkyl derivatives of 3beta-cholesterylamine linked to motifs that bind cell-impermeable ligands. When added to living mammalian cells, these synthetic receptors insert into cellular plasma membranes, project ligand-binding small molecules or peptides from the cell surface, and enable living cells to internalize targeted proteins and other cell-impermeable compounds. These artificial receptors mimic their natural counterparts by rapidly cycling between plasma membranes and intracellular endosomes, associating with proposed cholesterol and sphingolipid-rich lipid raft membrane microdomains, and delivering ligands to late endosomes/lysosomes. This "synthetic receptor targeting" strategy is briefly reviewed here and contrasted with other related cellular delivery systems. Potential applications of artificial cell surface receptors as molecular probes, agents for cellular targeting, tools for drug delivery, and methods for ligand depletion are discussed. The construction of synthetic receptors as prosthetic molecules, designed to seamlessly augment the molecular machinery of living cells, represents an exciting new frontier in the fields of bioorganic chemistry and chemical biology.     

Whole-body rocking motion of a fusion peptide in lipid bilayers from size-dispersed 15N NMR relaxation

Biological membranes present a highly fluid environment, and integration of proteins within such membranes is itself highly dynamic: proteins diffuse laterally within the plane of the membrane and rotationally about the normal vector of this plane. We demonstrate that whole-body motions of proteins within a lipid bilayer can be determined from NMR (15)N relaxation rates collected for different-sized bicelles. The importance of membrane integration and interaction is particularly acute for proteins and peptides that function on the membrane itself, as is the case for pore-forming and fusion-inducing proteins. For the influenza hemagglutinin fusion peptide, which lies on the surface of membranes and catalyzes the fusion of membranes and vesicles, we found large-amplitude, rigid-body wobbling motions on the nanosecond time scale relative to the lipid bilayer. This behavior complements prior analyses where data were commonly interpreted in terms of a static oblique angle of insertion for the fusion peptide with respect to the membrane. Quantitative disentanglement of the relative motions of two interacting objects by systematic variation of the size of one is applicable to a wide range of systems beyond protein-membrane interactions.     

Templated assembly of biomembranes on silica microspheres using bacteriorhodopsin conjugates as structural anchors

Membrane proteins are some of the most sophisticated molecules found in nature. These molecules have extraordinary recognition properties; hence, they represent a vast source of specialized materials with potential uses in sensing and screening applications. However, the strict requirement of the native lipid environment to preserve their structure and functionality presents an impediment in building biofunctional materials from these molecules. In general, the purification protocols remove the native lipid support structures found in the cellular environment that stabilize the membrane proteins. Furthermore, the membrane protein structure is often highly complex, typified by large, multisubunit complexes that not only span the lipid bilayer but also contain large (>2 nm) cytoplasmic and extracellular domains that protrude from the membrane. The present study is focused on using a biomimetic approach to build a stable, fluid microenvironment to be used to incorporate larger membrane proteins of interest into a tether-supported lipid bilayer membrane adequately spaced above a substrate passivated to liposome fusion and nonspecific adsorption. Our aim is to reintroduce the supporting structures of the native cell membrane using self-assembled supramolecular complexes constructed on microspheres in an artificial cytoskeleton motif. Central to our architecture is to utilize bacteriorhodopsin (bR), a transmembrane protein, as a biomembrane anchoring molecule to be tethered to surfaces of interest as a sparse structural element in the design. Compared to a typical lipid tether, which inserts into one leaflet of the lipid bilayer, bR anchoring provides an over 8-fold greater hydrophobic surface area in contact with the bilayer. In the work presented here, the silica microsphere surface was biofunctionalized with streptavidin to make it a suitable supporting interface. This was achieved by self-assembly of (p-aminophenyl)trimethoxysilane on the silica surface followed by subsequent conjugation of biotin-PEG3400 (PEG = poly(ethylene glycol) and PEG2000 for further passivation and the binding of streptavidin. We have conjugated bR with biotin-PEG3400 through amine-based coupling to use it as a tether. The biotin-PEG-bR conjugate was further labeled with Texas Red to facilitate localization via fluorescence imaging. Confocal microscopy was utilized to analyze the microsphere surface at different stages of surface modification by employing fluorescent staining techniques. Sparely tethered supported lipid bilayer membranes were constructed successfully on streptavidin-functionalized silica particles (5 mum) using a detergent-based method in which tethered bR nucleates self-assembly of the bilayer membrane. The fluidity of the supported membranes was analyzed using fluorescence recovery after photobleaching in confocal imaging detection mode. The phospholipid diffusion coefficients obtained from these studies indicated that nativelike fluidity was achieved in the tether-supported membranes, thus providing a prospective microenvironment for insertion of membrane proteins of interest.     

M2 Proton Channel Structural Validation from Full-Length Protein Samples in Synthetic Bilayers and E. coli Membranes

Validation: Membrane protein structures are sensitive to the environment used for structural characterization. NMR spectra of the full-length M2 proton channel from influenza?A were measured directly in E.?coli membranes and compared to spectra of the protein in synthetic lipid bilayers. The results demonstrate that these bilayers provide a native-like membrane environment.     

Estimation of cell surface associated protease activity and its application to lymphocytes.

A new method has been developed to estimate proteolytic activity available at the cell surface. Radioiodinated protein substrates are covalently linked to modified polystyrene-divinylbenzene beads with various diameters. These beads are presented to viable cells. Secreted enzyme activity is estimated when no contact occurs between beads and cells. Surface associated proteolytic activity is estimated by the increased rate of iodinated peptide release due to a contact between beads and cells. This method was applied to various lymphocyte preparations. In the absence of serum, mouse spleen lymphocytes produce three- to fourfold higher proteolytic activity than lymph node cells. This activity is completely inhibited by serum diluted 1:10. Since the proteolysis is so marked in the case of spleen cells, one must conclude that lymphocytes removed from the serum and treated in buffered mediums at 37 degrees C have enzymatically altered surface properties. Cell surface associated enzyme activity was measured using rat lymph node lymphocytes with less than 0.1% contamination by granulocytes. This predominantly thymus derived, T cell population had 30% increase in proteolysis due to contact between cells and solid-phase localized substrate of casein. The released enzymatic activity was inhibited by diisopropylfluorophosphate, but its effect on the surface associated enzyme activity remains questionable since it perturbs several membrane functions.     

Activation of G-protein-coupled receptors in cell-derived plasma membranes supported on porous beads

G-protein-coupled receptors (GPCRs) are ubiquitous mediators of signal transduction across cell membranes and constitute a very important class of therapeutic targets. In order to study the complex biochemical signaling network coupling to the intracellular side of GPCRs, it is necessary to engineer and control the downstream signaling components, which is difficult to realize in living cells. We have developed a bioanalytical platform enabling the study of GPCRs in their native membrane transferred inside-out from live cells to lectin-coated beads, with both membrane sides of the receptor being accessible for molecular interactions. Using heterologously expressed adenosine A(2A) receptor carrying a yellow fluorescent protein, we showed that the tethered membranes comprised fully functional receptors in terms of ligand and G protein binding. The interactions between the different signaling partners during the formation and subsequent dissociation of the ternary signaling complex on single beads could be observed in real time using multicolor fluorescence microscopy. This approach of tethering inside-out native membranes accessible from both sides is straightforward and readily applied to other transmembrane proteins. It represents a generic platform suitable for ensemble as well as single-molecule measurements to investigate signaling processes at plasma membranes.     

Screening molecular associations with lipid membranes using natural abundance 13C cross-polarization magic-angle spinning NMR and principal component analysis

We describe an NMR approach for detecting the interactions between phospholipid membranes and proteins, peptides, or small molecules. First, 1H-13C dipolar coupling profiles are obtained from hydrated lipid samples at natural isotope abundance using cross-polarization magic-angle spinning NMR methods. Principal component analysis of dipolar coupling profiles for synthetic lipid membranes in the presence of a range of biologically active additives reveals clusters that relate to different modes of interaction of the additives with the lipid bilayer. Finally, by representing profiles from multiple samples in the form of contour plots, it is possible to reveal statistically significant changes in dipolar couplings, which reflect perturbations in the lipid molecules at the membrane surface or within the hydrophobic interior.     

Bilayer hydrophobic thickness and integral membrane protein function

The influence of the lipid environment on the function of membrane proteins is increasingly recognized as crucial. Nevertheless, the molecular mechanisms underlying protein-lipid interactions remain obscure. Membrane lipid composition has a regulatory effect on membrane protein activity, and for a number of membrane proteins a clear correlation was found between protein activity and properties of the membrane bilayer such as fluidity. Membrane thickness is an important property of a lipid bilayer. It is expected that hydrophobic thickness match the hydrophobic thickness of transmembrane segments of integral membrane proteins. Any mismatch between the hydrophobic thicknesses of the lipid bilayer and the protein would lead to some modification in either the structure of the protein or the structure of the bilayer, or both. Consequent rearrangements may result in changes in protein activity. Here we review the behavior of several transmembrane proteins whose activity is altered by hydrophobic core thickness.     

Discrete Arrays of Liquid‐Crystal‐Supported Proteolipid Monolayers as Phantom Cell Surfaces

The phospholipid bilayers of living cell membranes exist almost universally in a liquid state. This enables motion and spatial reorganization of membrane components on multiple length scales, which is an essential feature of many biological processes. There is great interest in the development of molecularly defined interfaces between synthetic materials and living cells. To this end, there is a need for solid substrate materials that can be derivatized with fluid, membrane‐like interfaces. Herein, we describe array fabrication of discrete liquid‐crystal areas supporting phospholipid monolayer membranes, and characterize the interactions with several different membrane surface proteins [avidin series, cholera toxin, green fluorescent protein (GFP), intercellular adhesion molecule (ICAM) and major histocompatibility complex (MHC)]. Three different linkage strategies (biotin, nickel chelating lipids complexing with histidine, and the choleratoxin binding unit (CTB) associating with G_M1 are evaluated. Additionally, experiments with live immunological T cells forming active synapses at the interface exhibit the specific nature of the surface.     

Electrophoretic separation method for membrane pore‐forming proteins in multilayer lipid membranes

In this paper, we report on a novel electrophoretic separation and analysis method for membrane pore‐forming proteins in multilayer lipid membranes (MLMs) in order to overcome the problems related to current separation and analysis methods of membrane proteins, and to obtain a high‐performance separation method on the basis of specific properties of the lipid membranes. We constructed MLMs, and subsequently characterized membrane pore‐forming protein behavior in MLMs. Through the use of these MLMs, we were able to successfully separate and analyze membrane pore‐forming proteins in MLMs. To the best of our knowledge, this research is the first example of membrane pore‐forming protein separation in lipid membranes. Our method can be expected to be applied for the separation and analysis of other membrane proteins including intrinsic membrane proteins and to result in high‐performance by utilizing the specific properties of lipid membranes.     

Membrane lipids are both the substrates and a mechanistically responsive environment of TMEM16 scramblase proteins

Recent discoveries about functional mechanisms of proteins in the TMEM16 family of phospholipid scramblases have illuminated the dual role of the membrane as both the substrate and a mechanistically responsive environment in the wide range of physiological processes and genetic disorders in which they are implicated. This is highlighted in the review of recent findings from our collaborative investigations of molecular mechanisms of TMEM16 scramblases that emerged from iterative functional, structural, and computational experimentation. In the context of this review, we present new MD simulations and trajectory analyses motivated by the fact that new structural information about the TMEM16 scramblases is emerging from cryo-EM determinations in lipid nanodiscs. Because the functional environment of these proteins in in vivo and in in vitro is closer to flat membranes, we studied comparatively the responses of the membrane to the TMEM16 proteins in flat membranes and nanodiscs. We find that bilayer shapes in the nanodiscs are very different from those observed in the flat membrane systems, but the function-related slanting of the membrane observed at the nhTMEM16 boundary with the protein is similar in the nanodiscs and in the flat bilayers. This changes, however, in the bilayer composed of longer-tail lipids, which is thicker near the phospholipid translocation pathway, which may reflect an enhanced tendency of the long tails to penetrate the pathway and create, as shown previously, a nonconductive environment. These findings support the correspondence between the mechanistic involvement of the lipid environment in the flat membranes, and the nanodiscs. © 2019 Wiley Periodicals, Inc.     

Isolation of Escherichia coli inner membranes by metal affinity two-phase partitioning

As reduction of sample complexity is a central issue in membrane proteomic research, the need for new pre-fractionation methods is significant. Here we present a method for fast and efficient enrichment of Escherichia coli inner membranes expressing a His-tagged integral membrane L-fucose-proton symporter (FucP). An enriched inner membrane fraction was obtained from a crude membrane mixture using affinity two-phase partitioning in combination with nickel-nitrilotriacetic acid (Ni-NTA) immobilized on agarose beads. Due to interaction between the beads and FucP, inner membranes were selectively partitioned to the bottom phase of a polymer/polymer aqueous two-phase system consisting of poly(ethylene glycol) (PEG) and dextran. The partitioning of membranes was monitored by assaying the activity of an inner membrane marker protein and measuring the total protein content in both phases. The enrichment of inner membrane proteins in the dextran phase was also investigated by proteomic methodology, including sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), trypsin digestion and liquid chromatography in combination with tandem mass spectrometry (LC-MS/MS). Using a high level of significance (99.95%) in the subsequent database search, 36 proteins assigned to the inner membrane were identified in the bottom phase, compared to 29 when using the standard sucrose gradient centrifugation method for inner membrane isolation. Furthermore, metal affinity two-phase partitioning was up to 10 times faster than sucrose gradient centrifugation. The separation conditions in these model experiments provide a basis for the selective isolation of E. coli membranes expressing His-tagged proteins and can therefore facilitate research on such membrane proteomes.     

Proton‐Detected Solid‐State NMR Spectroscopy of a Zinc Diffusion Facilitator Protein in Native Nanodiscs

The structure, dynamics, and function of membrane proteins are intimately linked to the properties of the membrane environment in which the proteins are embedded. For structural and biophysical characterization, membrane proteins generally need to be extracted from the membrane and reconstituted in a suitable membrane‐mimicking environment. Ensuring functional and structural integrity in these environments is often a major concern. The styrene/maleic acid co‐polymer has recently been shown to be able to extract lipid/membrane protein patches directly from native membranes to form nanosize discoidal proteolipid particles, also referred to as native nanodiscs. In this work, we show that high‐resolution solid‐state NMR spectra can be obtained from an integral membrane protein in native nanodiscs, as exemplified by the 2×34 kDa bacterial cation diffusion facilitator CzcD.     

Counterion-mediated pattern formation in membranes containing anionic lipids

Most lipid components of cell membranes are either neutral, like cholesterol, or zwitterionic, like phosphatidylcholine and sphingomyelin. Very few lipids, such as sphingosine, are cationic at physiological pH. These generally interact only transiently with the lipid bilayer, and their synthetic analogs are often designed to destabilize the membrane for drug or DNA delivery. However, anionic lipids are common in both eukaryotic and prokaryotic cell membranes. The net charge per anionic phospholipid ranges from − 1 for the most abundant anionic lipids such as phosphatidylserine, to near − 7 for phosphatidylinositol 3,4,5 trisphosphate, although the effective charge depends on many environmental factors. Anionic phospholipids and other negatively charged lipids such as lipopolysaccharides are not randomly distributed in the lipid bilayer, but are highly restricted to specific leaflets of the bilayer and to regions near transmembrane proteins or other organized structures within the plane of the membrane. This review highlights some recent evidence that counterions, in the form of monovalent or divalent metal ions, polyamines, or cationic protein domains, have a large influence on the lateral distribution of anionic lipids within the membrane, and that lateral demixing of anionic lipids has effects on membrane curvature and protein function that are important for biological control.     

A comparative study of the COX-1 and COX-2 isozymes bound to lipid membranes

The monotopic proteins COX-1 and -2 in dimeric form bound to lipid bilayer membranes are studied using molecular dynamics simulations within an aqueous environment. The 25-ns simulations are performed for both isozymes with arachidonic acid bound in the cyclooxygenase sites. The interactions between the enzymes and the lipids are analyzed, providing insight into the attachment mechanism of monotopic proteins to membranes. Our study reveals some key differences between the two isozymes that include the orientations at which they sit on the surface of the membranes and the depths to which they embed within the membranes. The differences in membrane association of the isozymes indicate that they may integrate distinctively with the same membrane, and/or with different membranes or their lipid components. Our results indicate that arachidonic acid can be bound in the cyclooxygenase active site in distinct catalytically competent conformations that lead to certain hydroperoxy acids; and the arachidonic acid and/or cyclooxygenase sites undergo a conformational change which makes only one subunit of each homodimer catalytically active.