Controlling molecular diffusion in self-spreading lipid bilayer using periodic array of ultra-small metallic architecture on solid surface

Diffusion of target molecules incorporated in the self-spreading lipid bilayer was controlled by the introduction of periodic array of metallic architecture on solid surface. Retardation of the progress of target molecules became significant when the size of gap between small metal architectures was less than a few hundred nanometers. The self-spreading dynamics of the lipid bilayer depending on the size of the small gap were analyzed semiquantitatively. Estimated change in the driving force of the spreading layer suggests that highly localized compression of the spreading layer causes selective segregation of molecules.     

Tuning the dynamics and molecular distribution of the self-spreading lipid bilayer

The self-spreading dynamics of lipid bilayers were investigated at controlled electrolyte concentrations. The self-spreading velocity increased when the concentration of NaCl was increased from 1 to 100 mM. Comparing the experimentally determined spreading energy with that estimated from theoretical models, we found that the self-spreading dynamics were well explained by considering the van der Waals interaction, double layer interaction and hydration interaction energies between the self-spreading bilayer and the substrate. The characteristic behavior at high concentration is attributable to the increase in the density of the lipid layer, originating from the effective shielding of the molecular charges by the electrolyte ions in solution. The distribution of doped dye-labeled molecule within the spreading bilayer was also controllable by tuning the electrolyte concentration. All of these findings were explained by systematic changes in bilayer-substrate or inter-molecular interactions depending on the electrolyte concentration.     

Control of the structure of self-spreading lipid membrane by changing electrolyte concentration

We have controlled the structure of self-spreading lipid bilayer membranes prepared on surface-oxidized silicon substrates by changing electrolyte concentration. Analysis of the fluorescence intensity, considering the optical interference effect, clarified the stacking structure of the lipid membrane. By varying the electrolyte concentration, we can vary the number of single multilamellar lobes adsorbed on the underlying self-spreading bilayer. This dependence of the stacking ability on the electrolyte concentration was investigated on the basis of changes in the bilayer-lobe interaction energies, including van der Waals, electrostatic double layer, and hydration interaction energies. Theoretical estimation suggests that the observed electrolyte concentration dependence can be explained by the combination of the van der Waals attractive interaction energy and the repulsive double-layer interaction energy.     

Electrostatic control of lipid bilayer self-spreading using a nanogap gate on a solid support

We have demonstrated for the first time that the self-spreading of supported lipid bilayers can be controlled by the temporal switching of an electric field applied between nanogap electrodes. To account for this phenomenon, we propose an electrostatic trapping model in which an electric double layer plays an important role. The validity of this mechanism was verified by the dependence of self-spreading on the nanogap width and the ionic concentration of the electrolyte. Our results provide a promising tool for the temporal and spatial control of lipid bilayer formation for nanobio devices.     

Supported lipid bilayer self-spreading on a nanostructured silicon surface

We report on the self-spreading behavior of a supported lipid bilayer (SLB) on a silicon surface with various 100 nm nanostructures. SLBs have been successfully grown from a small spot of a lipid molecule source both on a flat surface and uneven surfaces with 100 nm up-and-down nanostructures. After an hour, the self-spreading SLB forms a large circle or an ellipse depending on the nanostructure pattern. The results are explained by a model that shows that a single-layer SLB grows along the nanostructured surfaces. The model is further supported by a quantitative analyses of our data. We also discuss the stability of the SLB on nanostructured surfaces in terms of the balance between its bending and adhesion energies.     

A molecular dynamics study on heat conduction characteristics in DPPC lipid bilayer

In this paper, nonequilibrium molecular dynamics simulations were performed on a single component 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine lipid bilayer in order to investigate the thermal conductivity and its anisotropy. To evaluate the thermal conductivity, we applied a constant heat flux to the lipid bilayer along and across the membrane with ambient water. The contribution of molecular interaction to the heat conduction was also evaluated. Along the bilayer plane, there is little transfer of thermal energy by the interaction between lipid molecules as compared with the interaction between water molecules. Across the bilayer plane, the local thermal conductivity depends on the constituents (i.e., water, head group, and tail group of lipid molecule) that occupy the domain. Although the intramolecular transfer of thermal energy in the tail groups of lipid molecules works efficiently to promote high local thermal conductivity in this region, the highest thermal resistance appears at the center of lipid bilayer where acyl chains of lipid molecules face each other due to a loss of covalent-bond and low number density. The overall thermal conductivities of the lipid bilayer in the directions parallel and perpendicular to the lipid membrane have been compared, and it was found that the thermal conductivity normal to the membrane is higher than that along the membrane, but it is still smaller than that of bulk water.     

Creation of lipid partitions by deposition of amphipathic viral peptides

Phospholipid vesicles exhibit a natural characteristic to fuse and reform into a continuous single bilayer membrane on hydrophilic solid substrates such as glass, mica, and silica. The resulting solid-supported bilayer mimics physiological tendencies such as lipid flip-flop and lateral mobility. The lateral mobility of fluorescently labeled lipids fused into solid-supported bilayers is found to change upon deposition on the membrane surface of an amphipathic alpha-helical peptide (AH) derived from the hepatitis C virus (HCV) NS5A protein. The binding of the AH peptide to a phospholipid bilayer, with the helical axis parallel to the bilayer, leads to immobilization of the bilayer. We used AFM to better understand the mechanistic details of this specific interaction, and determined that the diminished fluidity of the bilayer is due to membrane thinning. Utilizing this specific interaction between AH peptides and lipid molecules, we demonstrate a novel process for the creation of lipid partition by employing AH peptides as agents to immobilize lipid molecules, thus creating a patterned solid support with partition-defined areas of freely mobile lipid bilayers. This architecture could have a wide range of applications in novel sensing, biotechnology, high-throughput screening, and biomimetic strategies.     

Control of dynamics and molecular distribution in a self-spreading lipid bilayer using surface-modified metal nanoarchitectures

The molecular distribution and spreading dynamics of self-spreading lipid bilayers can be tuned by surface-modified metallic nanoarchitectures. Interactions between lipids and molecules in the surface modification alter the self-spreading behavior at the gate regions between adjacent nanoarchitectures, leading to molecular filtering/concentrating effects and modification of the dynamics. The hydrophilic surface can tune the spreading velocity without changing the molecular distribution in the spreading bilayer, whereas the hydrophobic surface provides a molecular concentrating function to the nanogates. This indicates that a combination of unmodified/hydrophobic/hydrophilic nanoarchitectures has a wide range of potential applications since it can be used to independently control the self-spreading dynamics and the molecular distribution.     

Supported lipid bilayer composition microarray fabricated by pattern-guided self-spreading

We report on the fabrication of a microarray of supported lipid bilayers (SLBs) with different chemical compositions and demonstrate its biosensing application. The technique utilizes the phenomenon of lipid self-spreading on a patterned surface, which offers complete positional selectivity for a supported lipid bilayer. We describe the fabrication of parallel 10-μm-wide lines, each filled with an SLB with a unique composition, at 5 μm intervals. Structures obtained with our new technique are finer and more highly integrated than previously reported structures that employ the vesicle fusion technique on patterned surfaces. We also detected specific binding between biotin and streptavidin with high contrast, indicating that the microarray is valuable for biosensing applications.     

Bilayer in small bicelles revealed by lipid-protein interactions using NMR spectroscopy

Intermolecular nuclear Overhauser effects (NOEs) between the integral outer membrane protein OmpX from Escherichia coli and small bicelles of dihexanoyl phosphatidylcholine (DHPC) and dimyristoyl phosphatidylcholine (DMPC) give insights into protein-lipid interactions. Intermolecular NOEs between hydrophobic tails of lipid and protein in the bicelles cover the surface area of OmpX forming a continuous cylindric jacket of approximately 2.7 nm in height. These NOEs originate only from DMPC molecules, and no NOEs from DHPC are observed. Further, these NOEs are mainly from methylene groups of the hydrophobic tails of DMPC, and only a handful of NOEs arise from methyl groups of the hydrophobic tails. The observed contacts indicate that the hydrophobic tails of DMPC are oriented parallel to the surface of OmpX and thus DMPC molecules form a bilayer in the vicinity of the protein. Thus, a bilayer exists in the small bicelles not only in the absence of but also in the presence of a membrane protein. In addition, the number of NOEs between the polar head groups of lipid molecules and protein is increased in the bicelles compared with those in micelles. This observation may be due to the closely packed head groups of the bilayer. Moreover, irregularity of hydrophobic interactions in the middle of the bilayer environment was observed. This observation together with the interactions between polar head groups and proteins gives a possible rationale for structural and functional differences of membrane proteins solubilized in micelles and in bilayer systems and hints at structural differences between protein-free and protein-loaded bilayers.     

Surface response methodology for the study of supported membrane formation

We report on the investigations of the formation of the tethered lipid bilayer by vesicle deposition on amine-functionalized surfaces. The tethered bilayer was created by the deposition of egg-PC vesicles containing 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-poly-(ethyleneglycol)-N-hydroxysuccinimide as anchoring molecules on an amine-coated surface. This approach is an easy route for the formation of a biomimetic-supported membrane. A Doelhert experimental design was applied to determine the conditions leading to the formation of a continuous and defect-free tethered bilayer on different surfaces (gold and glass). Doehlert designs allow modeling of the experimental responses by second-order polynomial equations as a function of experimental factors. Four factors expected to influence bilayer formation were studied: the lipid concentration in the vesicle suspension, the mass percentage of anchoring molecules in the vesicles, the contact time between the vesicles and the surface, and the resting time of the membrane after buffer rinse. The optimization of the membrane preparation parameters was achieved by monitoring lipid assembly formation using surface plasmon resonance spectroscopy on gold and by fluorescence recovery after photobleaching on glass. Three characteristic responses were systematically measured: the bilayer thickness, the lipid diffusion coefficient, and the lipid mobile fraction. The simultaneous inspection of the three characteristics revealed that a restricted experimental domain leads to properties that are in accordance with a bilayer presence. The factors of this domain are a lipid concentration from 0.1 to 1 mg/mL, 4-8% of anchoring molecules in the vesicles, 1-4 h of contact time between vesicles and surface, and 21-24 h of resting time after buffer rinse. Under these conditions, a membrane having a lipid mass per surface between 545 +/- 5 and 590 +/- 10 ng/cm2, a diffusion coefficient of between 2.5 +/- 0.3 x 10(-8) and 3.60 +/- 0.5 x 10(-8) cm2/s, and a mobile fraction between 94 +/- 2 and 99 +/- 1% was formed. These findings were confirmed by atomic force microscopy observations, which showed the presence of a continuous and homogeneous bilayer in the determined experimental domain. This formation procedure presents many advantages; it provides an easily obtainable biomimetic membrane model for proteins studies and offers a versatile tethered bilayer because it can be adapted easily to various types of supports.     

Anisotropic solvent model of the lipid bilayer. 2. Energetics of insertion of small molecules, peptides, and proteins in membranes

A new computational approach to calculating binding energies and spatial positions of small molecules, peptides, and proteins in the lipid bilayer has been developed. The method combines an anisotropic solvent representation of the lipid bilayer and universal solvation model, which predicts transfer energies of molecules from water to an arbitrary medium with defined polarity properties. The universal solvation model accounts for hydrophobic, van der Waals, hydrogen-bonding, and electrostatic solute-solvent interactions. The lipid bilayer is represented as a fluid anisotropic environment described by profiles of dielectric constant (ε), solvatochromic dipolarity parameter (π*), and hydrogen bonding acidity and basicity parameters (α and β). The polarity profiles were calculated using published distributions of quasi-molecular segments of lipids determined by neutron and X-ray scattering for DOPC bilayer and spin-labeling data that define concentration of water in the lipid acyl chain region. The model also accounts for the preferential solvation of charges and polar groups by water and includes the effect of the hydrophobic mismatch for transmembrane proteins. The method was tested on calculations of binding energies and preferential positions in membranes for small-molecules, peptides and peripheral membrane proteins that have been experimentally studied. The new theoretical approach was implemented in a new version (2.0) of our PPM program and applied for the large-scale calculations of spatial positions in membranes of more than 1000 peripheral and integral proteins. The results of calculations are deposited in the updated OPM database ( http://opm.phar.umich.edu ).     

Templated assembly of biomembranes on silica microspheres using bacteriorhodopsin conjugates as structural anchors

Membrane proteins are some of the most sophisticated molecules found in nature. These molecules have extraordinary recognition properties; hence, they represent a vast source of specialized materials with potential uses in sensing and screening applications. However, the strict requirement of the native lipid environment to preserve their structure and functionality presents an impediment in building biofunctional materials from these molecules. In general, the purification protocols remove the native lipid support structures found in the cellular environment that stabilize the membrane proteins. Furthermore, the membrane protein structure is often highly complex, typified by large, multisubunit complexes that not only span the lipid bilayer but also contain large (>2 nm) cytoplasmic and extracellular domains that protrude from the membrane. The present study is focused on using a biomimetic approach to build a stable, fluid microenvironment to be used to incorporate larger membrane proteins of interest into a tether-supported lipid bilayer membrane adequately spaced above a substrate passivated to liposome fusion and nonspecific adsorption. Our aim is to reintroduce the supporting structures of the native cell membrane using self-assembled supramolecular complexes constructed on microspheres in an artificial cytoskeleton motif. Central to our architecture is to utilize bacteriorhodopsin (bR), a transmembrane protein, as a biomembrane anchoring molecule to be tethered to surfaces of interest as a sparse structural element in the design. Compared to a typical lipid tether, which inserts into one leaflet of the lipid bilayer, bR anchoring provides an over 8-fold greater hydrophobic surface area in contact with the bilayer. In the work presented here, the silica microsphere surface was biofunctionalized with streptavidin to make it a suitable supporting interface. This was achieved by self-assembly of (p-aminophenyl)trimethoxysilane on the silica surface followed by subsequent conjugation of biotin-PEG3400 (PEG = poly(ethylene glycol) and PEG2000 for further passivation and the binding of streptavidin. We have conjugated bR with biotin-PEG3400 through amine-based coupling to use it as a tether. The biotin-PEG-bR conjugate was further labeled with Texas Red to facilitate localization via fluorescence imaging. Confocal microscopy was utilized to analyze the microsphere surface at different stages of surface modification by employing fluorescent staining techniques. Sparely tethered supported lipid bilayer membranes were constructed successfully on streptavidin-functionalized silica particles (5 mum) using a detergent-based method in which tethered bR nucleates self-assembly of the bilayer membrane. The fluidity of the supported membranes was analyzed using fluorescence recovery after photobleaching in confocal imaging detection mode. The phospholipid diffusion coefficients obtained from these studies indicated that nativelike fluidity was achieved in the tether-supported membranes, thus providing a prospective microenvironment for insertion of membrane proteins of interest.     

Single molecule measurements within individual membrane-bound ion channels using a polymer-based bilayer lipid membrane chip

The measurement of single poly(ethylene glycol) (PEG) molecules interacting with individual bilayer lipid membrane-bound ion channels is presented. Measurements were performed within a polymer microfluidic system including an open-well bilayer lipid membrane formation site, integrated Ag/AgCl reference electrodes for on-chip electrical measurements, and multiple microchannels for independent ion channel and analyte delivery. Details of chip fabrication, bilayer membrane formation, and alpha-hemolysin ion channel incorporation are discussed, and measurements of interactions between the membrane-bound ion channels and single PEG molecules are presented.     

Dynamics of a bilayer membrane with membrane-solvent partial slip boundary conditions

We discuss the dynamics of a bilayer membrane with partial slip boundary conditions between the monolayers and the bulk fluid. Using Onsager’s variational principle to account for the associated dissipations, we derive the coupled dynamic equations for the membrane height and the excess lipid density. The newly introduced friction coe?cients appear in the renormalized fluid viscosities. For ordinary lipid bilayer membranes, we find that it is generally justified to ignore the e?ects of permeation and parallel slip at the membrane surface.     

Potential analytical applications of lysenin channels for detection of multivalent ions

Transmembrane protein transporters possessing binding sites for ions, toxins, pharmaceutical drugs, and other molecules constitute excellent candidates for developing sensitive and selective biosensing devices. Their attractiveness for analytical purposes is enhanced by the intrinsic amplification capabilities shown when the binding event leads to major changes in the transportation of ions or molecules other than the analyte itself. The large-scale implementation of such transmembrane proteins in biosensing devices is limited by the difficulties encountered in inserting functional transporters into artificial bilayer lipid membranes and by the limitations in understanding and exploiting the changes induced by the interaction with the analyte for sensing purposes. Here, we show that lysenin, a pore-forming toxin extracted from earthworm Eisenia foetida, which inserts stable and large conductance channels into artificial bilayer lipid membranes, functions as a multivalent ion-sensing device. The analytical response consists of concentration and ionic-species-dependent macroscopic conductance inhibition most probably linked to a ligand-induced gating mechanism. Multivalent ion removal by chelation or precipitation restores, in most cases, the initial conductance and demonstrates reversibility. Changes in lipid bilayer membrane compositions leading to the absence of voltage-induced gating do not affect the analytical response to multivalent ions. Microscopic current analysis performed on individual lysenin channels in the presence of Cu²⁺ revealed complex open–closed transitions characterized by unstable intermediate sub-conducting states. Lysenin channels provide an analytical tool with a built-in sensing mechanism for inorganic and organic multivalent ions, and the excellent stability in an artificial environment recommend lysenin as a potential candidate for single-molecule detection and analysis.     

Detection of membrane biointeractions based on fluorescence superquenching

Assays for biointeractions of molecules with supported lipid bilayers using fluorescence superquenching are described. A conjugated cationic polymer was adsorbed on to silica microspheres, which were then coated with an anionic lipid bilayer. The lipid bilayer attenuated superquenching by acting as a barrier between the conjugated polymer and its quencher. Biointeractions of the lipid bilayer with a membrane lytic peptide, melittin, were detected and quantitated by superquenching of the conjugated polyelectrolyte in flow cytometric and microfluidic bioassays. A higher sensitivity for detecting melittin lysis of the lipid bilayer at lower concentrations and shorter times for melittin action was found using flow cytometry in this study in comparison to other existing methods. This study combined the sensitivity of superquenching and flow cytometry to detect biointeractions with a lipid bilayer, which serves as a platform for developing functional assays for sensor applications, lipid enzymology, and investigations of molecular interactions. In addition, this study demonstrated proof-of-concept for using superquenching detected as a result of lipid bilayer disruption in a microfluidic format.     

Agar-supported lipid bilayers — basic structures for biosensor design. Electrical and mechanical properties

The lipid bilayer is widely accepted as the basic structure of all biological membranes. Known as BLM (bilayer lipid membrane), it can be prepared artificially. Suitably modified, the BLM serves as a very appropriate model for biological membranes. Recent investigations have verified the high analytical potential of artificial lipid membranes. With a structure and composition almost identical to the lipid moiety of biomembranes, the BLM may serve as an ideal host for receptor molecules of biological origin, thus becoming a transducer which could “see” the environment the way the living cell does. For the construction of lipid bilayer based biosensors; however, stable, easy to prepare and long-lasting lipid membranes are required. With this aim in mind, we have prepared lipid bilayer membranes which use an agar gel as support. This as-BLM (agar-supported BLM) has been shown to possess the same electrical, mechanical and dynamic properties the conventional BLM is famous for, along with the benefits of long-term stability and considerably elevated breakdown voltages. Its preparation on the tip of an agar-filled Teflon tube of 0.5 mm diameter is easy and can be performed even by less-skilled personnel.

In an attempt of further miniaturization the concept of the as-BLM was applied to thin-film micro-systems manufactured by standard micro-electronic techniques. The result is a lipid bilayer system, which, while preserving all the essential properties of the bilayer lipid membrane, can serve as a basic building block for cheap, disposable biosensoric systems.