Energy of Formation of an Acyclic <Emphasis Type="Italic">N</Emphasis>-Methyltrifluoromethanesulfonamide Dimer

The energy of formation of an open-chain N-methyltrifluoromethanesulfonamide dimer stabilized by the N-H⋯O=S hydrogen bond is 20.1 kJ mol⁻¹ (CH₂Cl₂). This value exceeds by ∼12 kJ mol⁻¹ the energy of formation of cyclic secondary methanesulfonamide self-associates per hydrogen bond.__________Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 2, 2005, pp. 295–298.Original Russian Text Copyright © 2005 by Chipanina, Sherstyannikova, Sterkhova, Turchaninov, Shainyan.     

Kinetics of the thermal decomposition of [Co(NH3)6]2(C2O4)3·4H2O

The thermal decomposition of [Co(NH₃)₆]₂(C₂O₄)₃·4H₂O was studied under isothermal conditions in flowing air and argon. Dissociation of the above complex occurs in three stages. The kinetics of the particular stages thermal decomposition have been evaluated. The R_N and/or A_M models were selected as those best fitting the experimental TG curves. The activation energies,E, and lnA were calculated with a conventional procedure and by a new method suggested by Kogaet al. [10, 11]. Comparison of the results have showed that the Arrhenius parameters values estimated by the use of both methods are very close. The calculated activation energies were in air: 96 kJ mol^–1 (R_1.575, stage I); 101 kJ mol^–1 (Ain1.725 stage II); 185 kJ mol^–1 (A _2.9, stage III) and in argon: 66 kJ mol^–1 (A _1.25, stage I); 87 kJ mol^–1 (A _1.825, stage II); 133 kJ mol^–1 (A _2.525, stage III).     

Oxygen reduction in acid media at the amorphous Mo–Os–Se carbonyl cluster coated glassy carbon electrodes

An amorphous Mo–Os–Se carbonyl cluster compound has been synthesized in 1,2-dichlorobenzene (b.p.≈180°C) to be tested as an electrocatalyst for molecular oxygen reduction in 0.5 M H₂SO₄. Scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM) performed for the powder supported on pyrolytic carbon show a distribution of nanometer-scale amorphous particles with agglomerations in cluster forms. The catalytic activity was studied by the rotating disc electrode technique. Kinetic studies show a first-order reaction with a Tafel slope of −0.118 V dec⁻¹ and dα/dT=1.55×10⁻³ K⁻¹. In the temperature range 298–343 K, an activation energy of 32 kJ mol⁻¹ was determined.     

The measurement of high proton affinities for a variety of metallic compounds: a new approach by flame-ion mass spectrometry

A small amount (≤ 10⁻⁶ mol fraction) of four alkaline earth metals, tin and yttrium were introduced into five, premixed, fuel-rich, H₂–O₂–N₂ flames at atmospheric pressure in the temperature range 1820–2400 K. Aqueous salt solutions of the metals were sprayed into the premixed flame gas as an aerosol using an atomizer technique. Ions in a flame were observed by sampling flame gas through a nozzle into a mass spectrometer. The concentrations of the major neutral metallic species present in the flame were calculated from thermodynamic data currently available. The principal metallic ions observed were AOH⁺ (A = Mg, Ca, Sr, Ba, Sn) and A(OH)₂⁺ (A = Y), formed initially by proton transfer to AO and OAOH from H₃O⁺, a natural flame ion. Except for Mg, the ions were also produced by chemi-ionization processes. By adjusting the concentration(s) of the salt solution in the atomizer, it was found that a pair of ions could be brought into equilibrium within the time scale of the flame; the pairs included H₃O⁺ with a metal ion or two metallic ions. Because water is a major product of combustion, a very large difference in proton affinity PA⁰(AO) − PA⁰(H₂O) ≤ 490 kJ mol⁻¹ (117 kcal mol⁻¹) could be attempted for the proton transfer equilibrium. Using PA⁰(H₂O) = 691.0 kJ mol⁻¹ (165.2 kcal mol⁻¹) as a reference base to anchor the proton affinity scale, ion ratio measurements led to proton affinity PA⁰ values of 766, 912, 1004, 1184, 1201, and 1222 kJ mol⁻¹ (183, 218, 240, 283, 287, and 292 kcal mol⁻¹) corrected to 298 K for OYOH, SnO, MgO, CaO, SrO, and BaO, respectively; of these, only the value for OYOH has not been reported previously. If it is assumed that the neutral thermodynamic data are correct (although some appear to be in error), the uncertainties in the PA results reported here are ± 21 kJ mol⁻¹ (5 kcal mol⁻¹). The realization that these equilibria can be achieved in flames provides a new approach to consolidate and build the high end of the proton affinity ladder, primarily of metallic species which are not accessible at lower temperatures.     

Kinetic studies on the oxidation of uranium(IV) in nitric acid solution

The kinetics of oxidation of U(IV) in nitric acid solution by nitrous acid and air oxygen have been studied. The effects of concentrations of U(IV), nitric acid, hydrogen ion and nitrous acid in aqueous solution or oxygen in gas on the oxidation rate have been examined. The oxidation rate increases with increasing temperature and the activation energies are 47 kJ mol^–1 for nitrous acid and 91 kJ mol^–1 for oxygen. The mechanisms for both oxidation reactions are discussed.     

Activation Parameters for the Formation and Decay of Partial-Charge-Transfer Exciplexes of 9-Cyanoanthracene, 1,12-Benzperylene, and Pyrene

The factors affecting the rate of formation and decay of exciplexes with partial charge transfer, which form in the kinetic region of photoinduced electron transfer (G ^* _et > –0.2 eV), were studied. The rate of formation of exciplexes is controlled mainly by the diffusion of reactants and the low steric factor (0.15–1.0). The activation enthalpy and entropy for the exciplex formation (9–13 kJ mol^–1 and –(12–28) J mol^–1 K^–1) are close to the activation enthalpy and entropy of diffusion, respectively. Charge transfer in an exciplex and polarization of the medium generally occur after passing the transition state. In contrast, the activation enthalpy of exciplex decay (its conversion into the reaction products) is close to zero (±6 kJ mol^–1) and the activation entropy is strongly negative –(80–130) J mol^–1 K^–1.     

Molecular Structure and Conformational Preferences of Trimethyl Phosphorotrithioite,P(SMe)<Subscript>3</Subscript>, Evaluated by Gas-Phase Electron Diffraction and Quantum Chemical Calculations

Free P(SMe)₃ molecule was studied by gas electron diffraction (GED) and by B3PW91/6-311+G* (DFT) and MP2/6-31+G* calculations. Each conformer is characterized by three dihedral angles τ(CSPlp), where lp denotes the direction of the lone electron lone pair on the P atom. DFT calculations indicate that the most stable conformer is an anti,gauche+,gauche- (ag+g-) conformer of C _s symmetry; the next are the ag+g+ (ΔE = 2.5 kJ mol⁻¹), g+g+g+ (ΔE = 5.2 kJ mol⁻¹), and aa+g+ (Δ E = 12.5 kJ mol⁻¹) conformers. The MP2 calculations give the similar order, with the relative energies of 0.3, 4.3, and 10.6 kJ mol⁻¹, respectively. The experimental GED data agree well with the presence of only two conformers: χ(ag+g+) = 80(20)% and χ(ag+g-) = 20(10)%.__________Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 5, 2005, pp. 742–750.Original Russian Text Copyright © 2005 by Belyakov, Khramov, Baskakova, Naumov.     

Thermodynamic characteristics of thermal dissociation of platinum tetrachloride

The pressure of thermal dissociation of platinum tetrachloride by the first step PtCl₄(s) = PtCl₃(s) + 0.5 Cl₂(g) was measured by the static method with a quartz membrane-gauge zero-pressure manometer. An approximating equation for the dissociation pressure vs. temperature was found. The enthalpy (52160±880 J mol⁻¹) and entropy (72.1±1.6 J mol⁻¹ K⁻¹) of dissociation were calculated. The heat of formation found for platinum tetrachloride (−246.3±1.3 kJ mol⁻¹) at 298.15 K agrees well with the value obtained by the calorimetric method (−245.6±1.9 kJ mol⁻¹).__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2028–2031, October, 2004.     

NMR study of the dynamic behaviour of the system 2-ethylhexylsodium-2-ethylhexyllithium in heptane

Mixtures of 2-ethylhexylsodium and 2-ethylhexyllithium are studied by ¹H- and ¹³C-NMR spectroscopy in the temperature range from 20 to −50°C in hydrocarbon solutions. Characteristic temperature-dependent spectra obtained are indicative of dynamic exchange processes taking place in the system. The following activation parameters are found: ΔH^≠=31.7±2.7 kJ mol⁻¹; ΔG^≠₃₁₃=58.7±0.6 kJ mol⁻¹; ΔS^≠=−86.37±10.8 J mol⁻¹ K⁻¹. The negative value of the activation entropy indicates that the exchange proceeds through the associative mechanism. The participation in exchange reactions of aggregates, containing both sodium and lithium derivatives, is suggested.     

Rate and Equilibrium Constants of Benzoyl Group Transfer between Pyridine N-Oxides

Kinetic characteristics of 19 transfer reactions of benzoyl group from N-benzoyloxypyridinium salts to pyridine N-oxides and 4-dimethylaminopyridine were studied in acetonitrile by the stopped-flow method. The rate of an identical reaction for 4-methoxypyridine was measured by dynamic NMR spectroscopy. For 5 other identical reactions the rates were estimated from Bronsted correlations. Equilibrium constants were estimated with the use of UV spectrophotometry (6), IR spectroscopy (2), from kinetic data (K _ij = k _ij /k _ji ) (2), and in one case as logK _i−j = logK _i−x − logK _j−x . The second order rate constants (k _ij ) varied in the range 10²–10⁵ l mol⁻¹ s⁻¹, the equilibrium constants (K _ij ) in the range 10²–10⁻²; the activation parameters (ΔH ^≠) were within 15–50 kJ mol⁻¹, (−ΔS ^≠) −20–110 J mol⁻¹ K⁻¹. The reactions under study occur in a single stage following the concerted S_N2 mechanism through an early associative transition state. The benzoyl groups exchange rate and equilibrium are well described by simplified Marcus equation (omitting the quadratic term).__________Translated from Zhurnal Organicheskoi Khimii, Vol. 41, No. 5, 2005, pp. 788–792.Original Russian Text Copyright © 2005 by Rybachenko, Schroeder, Chotii, Lenska, Red’ko, Kovalenko.     

Structures and thermodynamic stabilities of the C2H4O isomers: Acetaldehyde,vinyl alcohol and ethylene oxide

Ab initio molecular orbital theory with a sequence of basis sets ranging from minimal to triple zeta plus polarization and with electron correlation incorporated using Möller-Plesset perturbation theory terminated at third order (MP3) is used to examine the structures and relative energies of the C₂H₄O isomers, acetaldehyde, vinyl alcohol and ethylene oxide. Acetaldehyde is indicated to be the most stable isomer with vinyl alcohol lying 45 kJ mol^–1 and ethylene oxide 114 kJ mol^–1 higher in energy. The theoretical structures and energies are in reasonable agreement with the best available experimental data.     

Modeling the Proton Transport in Orthoperiodic and Orthotelluric Acids and Their Salts

Orthoperiodic and orthotelluric acids, their salts MIO₆H₄ (M = Li, Rb, Cs) and CsH₅TeO₆, and dimers of the salt · acid type are calculated within density functional theory B3LYP and basis set LanL2DZ complemented by the polarizationd,p-functions. According to calculations, the salt · acid dimerization is energetically favorable for compounds MIO₆H₄ · H₅IO₆ (M = Rb, Cs) and CsIO₆H₄ · H₆TeO₆. The dimerization energy is equal to 138–146 kJ mol^–1. With relatively small activation energies equal to 4 kJ mol^–1 (M = Li) and 11 kJ mol^–1 (M = Rb, Cs), possible is rotation of octahedron IO₆ relative to the M atom in monomers of salt molecules. The proton transfer along an octahedron occurs with activation energies of 63–84 kJ mol^–1. The activation energy for the proton transfer between neighboring octahedrons of the type salt · acid acid · salt equals 8–17 kJ mol^–1. Quantum-chemical calculations nicely conform to x-ray diffraction and electrochemical data.     

Kinetics of the R + HBr RH + Br (CH3CHBr, CHBr2 or CDBr2) equilibrium. Thermochemistry of the CH3CHBr and CHBr2 radicals

The kinetics of the reaction of the CH₃CHBr, CHBr₂ or CDBr₂ radicals, R, with HBr have been investigated in a temperature-controlled tubular reactor coupled to a photoionization mass spectrometer. The CH₃CHBr (or CHBr₂ or CDBr₂) radical was produced homogeneously in the reactor by a pulsed 248 nm exciplex laser photolysis of CH₃CHBr₂ (or CHBr₃ or CDBr₃). The decay of R was monitored as a function of HBr concentration under pseudo-first-order conditions to determine the rate constants as a function of temperature. The reactions were studied separately from 253 to 344 K (CH₃CHBr + HBr) and from 288 to 477 K (CHBr₂ + HBr) and in these temperature ranges the rate constants determined were fitted to an Arrhenius expression (error limits stated are 1σ + Student’s t values, units in cm³ molecule⁻¹ s⁻¹, no error limits for the third reaction): k(CH₃CHBr + HBr) = (1.7 ± 1.2) × 10⁻¹³ exp[+ (5.1 ± 1.9) kJ mol⁻¹/RT], k(CHBr₂ + HBr) = (2.5 ± 1.2) × 10⁻¹³ exp[−(4.04 ± 1.14) kJ mol⁻¹/RT] and k(CDBr₂ + HBr) = 1.6 × 10⁻¹³ exp(−2.1 kJ mol⁻¹/RT). The energy barriers of the reverse reactions were taken from the literature. The enthalpy of formation values of the CH₃CHBr and CHBr₂ radicals and an experimental entropy value at 298 K for the CH₃CHBr radical were obtained using a second-law method. The result for the entropy value for the CH₃CHBr radical is 305 ± 9 J K⁻¹ mol⁻¹. The results for the enthalpy of formation values at 298 K are (in kJ mol⁻¹): 133.4 ± 3.4 (CH₃CHBr) and 199.1 ± 2.7 (CHBr₂), and for α-C–H bond dissociation energies of analogous compounds are (in kJ mol⁻¹): 415.0 ± 2.7 (CH₃CH₂Br) and 412.6 ± 2.7 (CH₂Br₂), respectively.     

Electrode Processes during Aluminum Electrodeposition in Aromatic Solvents

The aluminum electrodeposition kinetics is studied in solutions of aluminum bromide in such aromatic solvents as benzene, toluene, p-xylene, and ethylbenzene. The effect of the aluminum bromide concentration on the rate of aluminum electrodeposition from a xylene electrolyte is investigated. A failed aluminum-plating electrolyte can be restored to full working capacity by treating it with an alkyl halide. This capability to restore the covering power of aluminum-plating electrolytes decreases in the series CH₃Cl > C₂H₅Br > n-₃H₇Br > n-C₄H₉Br. The temperature dependence of the rate of cathodic aluminum deposition is determined. The calculated effective activation energy for aluminum electrodeposition from a xylene–durene electrolyte is 44.5–64.5 kJ mol^–1.     

Solubility of Ethane,Propane, and Butane in Aqueous Solutions of Sodium Dodecyl Sulfate

The solubility of ethane, propane, and butane under standard conditions in aqueous micellar solutions of sodium dodecyl sulfate with the salt concentration from 0. 025 to 0. 3 M was studied. The methylene group increment of the Gibbs energy of solubilization in the systems hydrocarbons (C₂–C₄)-sodium dodecyl sulfate was calculated; its value, −3.7 kJ mol⁻¹, is close to that in solutions with addition of 0.1 M NaCl. The thermodynamic cycle of methylene group increments of the Gibbs energies of solution of hydrocarbons in water and micellar solutions of surfactants is discussed.__________Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 1, 2005, pp. 36–38.Original Russian Text Copyright © 2005 by Mirgorod.     

A Kinetic and Mechanistic Study on Substitution of Aqua Ligands from <Emphasis Type="Italic">cis</Emphasis>-diaqua-<Emphasis Type="Italic">bis</Emphasis>-(bipyridyl)-ruthenium(II) Complex by Thiosemicarbazide in Aqueous Medium

The kinetics of the interaction of thiosemicarbazide with cis-[Ru(bipy)₂(H₂O)₂]²⁺ (bipy = α α′-bipyridyl) have been studied spectrophotometrically as a function of [Ru(bipy)₂(H₂O)₂²⁺], [bipyridyl] and temperature, at a particular pH (4.8), where the substrate complex exists predominantly as the diaqua species and thiosemicarbazide as the neutral ligand. The reaction proceeds via an outer sphere association complex formation, followed by two slow consecutive steps. The first is the conversion of the aforementioned complex into the inner sphere complex, and the second step involves the entrance of another thiosemicarbazide molecule in the coordination zone of Ru(II) whereby, in each step, an aqua ligand is replaced. The association equilibrium constant (K_E) for the outer sphere complex formation has been evaluated together with rate constants for the two subsequent steps. Activation parameters have been calculated for both steps using the Eyring equation (ΔH₁^# = 25.37±1.6 kJ mol⁻¹, ΔS₁^# = −215.48 ± 4.5 J K⁻¹ mol⁻¹, ΔH₂^# = 24.24 ± 1.1 kJ mol⁻¹, ΔS₂^# = −207.14 ± 3.0 J K⁻¹ mol⁻¹). The low enthalpy of activation and large negative value of entropy of activation indicate an associative mode of activation for both aqua ligand substitution processes. From the temperature dependence of K_E, the thermodynamic parameters calculated are: ΔH⁰ = 10.75±0.54 kJ mol⁻¹ and ΔS⁰ = 84.67 ± 1.75 J K⁻¹ mol⁻¹, which give a negative ΔG⁰ value at all temperatures studied, supporting the spontaneous formation of an outersphere association complex prior to the first step.     

Molecular structure,conformational mobility,vibrational spectra,and thermochemistry of peroxyacetic acid: an ab initio and density functional study

The structure of the peroxyacetic acid (PAA) molecule and its conformational mobility under rotation about the peroxide bond was studied by ab initio and density functional methods. The free rotation is hindered by the trans-barrier of height 22.3 kJ mol^–1. The equilibrium molecular structure of AcOOH (C _s symmetry) is a result of intramolecular hydrogen bond. The high energy of hydrogen bonding (46 kJ mol^–1 according to natural bonding orbital analysis) hampers formation of intermolecular associates of AcOOH in the gas and liquid phases. The standard enthalpies of formation for AcOOH (–353.2 kJ mol^–1) and products of radical decomposition of the peroxide — AcO^· (–190.2 kJ mol^–1) and AcOO^· (–153.4 kJ mol^–1) — were determined by the G2 and G2(MP2) composite methods. The O—H and O—O bonds in the PAA molecule (bond energies are 417.8 and 202.3 kJ mol^–1, respectively) are much stronger than in alkyl hydroperoxide molecules. This provides an explanation for substantial contribution of non-radical channels of the decomposition of peroxyacetic acid. The electron density distribution and gas-phase acidity of PAA were determined. The transition states of the ethylene and cyclohexene epoxidation reactions were located (E _a = 71.7 and 50.9 kJ mol^–1 respectively).     

Thermal Analysis of Casein

Case in was analyzed during thermal treatment and pyrolysis. The thermal degradation process of casein was interpreted and thermostability indices, rate, order and activation energy of thermode-structive reaction of casein were determined on the basis of thermogravimetric analysis. The thermodestruction of casein has the characteristics of a first order reaction with activation energy E _a=3.87 kcal mol^–1 (16.2 kJ mol^–1).The pyrolysis of casein was investigated and we determined optimal heating temperature — 550°C and yields of biochar, pitch, pyrolysis water and gases.This revised version was published online in November 2005 with corrections to the Cover Date.     

Adsorption of 2-amino-5-nitropyridine on the (111) and (210) silver faces

The adsorption isotherms of 2-amino-5-nitropyridine (ANP) on the (111) and (210) silver faces from an aqueous solution of 0.09 M KClO₄ + 0.02 M NaOH were determined at −0.4 V vs. the 1 mol⁻¹ calomel electrode using double-potential-step chronocoulometry. The surface concentration Γ_ANP of ANP was obtained by stepping the applied potential from −0.4 V, where ANP is electroinactive, to −1.2 V, where ANP is electroreduced to 2,5-diaminopyridine. The charge involved in this step, once corrected for the diffusive and capacitive contributions, yields 6FΓ_ANP directly. The maximum surface concentration and standard Gibbs energy of adsorption are equal to 3.6 × 10⁻¹⁰ mol cm⁻² and −35 kJ mol⁻¹ on Ag(111) and 5.2 × 10⁻¹⁰ mol cm⁻² and 42 kJ mol⁻¹ on Ag(210), thus demonstrating the strong effect of surface crystallography on the energetics of ANP adsorption.     

Kinetics of Formation of Peroxyacetic Acid

The kinetics of the reaction of acetic acid with hydrogen peroxide, leading to peroxyacetic acid, were studied at various molar reactant ratios (AcOH-H₂O₂ from 6 : 1 to 1 : 6) at 20, 40, and 60°C and sulfuric acid (catalyst) concentrations of 0 to 9 wt %. The reaction is reversible, and the equilibrium constant decreases as the temperature rises: K = 2.10 (20°C), 1.46 (40°C), 1.07 (60°C); Δ_r H ⁰ = − 13.7±0.1 kJ mol⁻¹, Δ_r S = −40.5±0.4 J mol⁻¹ K⁻¹. The maximal equilibrium concentration of peroxyacetic acid (2.3 M) is attained at 20°C and a molar AcOH-to-H₂O₂ ratio of 2.5 : 1. The rate constants of both forward and reverse reactions increase with increase in sulfuric acid concentration from 0 to 5 wt %. Further raising the catalyst concentration does not affect the reaction rate. The reaction mechanism is discussed.__________Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 7, 2005, pp. 1187–1193.Original Russian Text Copyright © 2005 by Dul’neva, Moskvin.