Synthesis of highly-ordered mesoporous silica particles using mixed cationic and anionic surfactants as templates

We applied a molecular assembly formed in an aqueous surfactant mixture of cationic cetyltrimethylammonium bromide (CTAB) and anionic sodium octylsulfate (SOS) as templates of mesoporous silica materials. The hexagonal pore size can be controlled between 3.22 and 3.66 nm with the mixed surfactant system. In addition, we could observe the lamellar structure of the mixed surfactants with precursor molecules, which strongly shows the possibility of precise control of both the pore size and the structure of pores by changing the mixing ratio of surfactants. Moreover, use of the cationic surfactant having longer hydrophobic chain like stearyltrimethylammonium bromide (STAB) caused the increase in d(100) space and shifted the point of phase transition from hexagonal phase to lamellar phase to lower concentration of SOS.     

How Nano-Ions Act Like Ionic Surfactants

Recently, nanometric ions were shown to adsorb to hydrated neutral surfaces and to bind to the cavities of macrocyclic molecules with an unexpectedly strong affinity arising from a solvent-mediated effect named superchaotropicity. We show here that nano-ions at low concentrations (μm range), similarly to anionic surfactants, induce the spontaneous transformation of a swollen lyotropic lamellar phase of non-ionic surfactant into a vesicle phase. This transition occurs when the neutral lamellae acquire charges, either by adsorption of the nano-ions onto, or by anchoring of the ionic surfactant into the lamellae. In contrast to ionic surfactants, nano-ions strongly dehydrate the neutral surfactant assemblies. As a conclusion, these purely inorganic nanometric ions act as alternatives to the widely used organic ionic surfactants.     

阴离子表面活性剂与阳离子的相互作用

用密度泛函理论, 在B3LYP/6-31G水平上, 对十二烷基磺酸盐和羧酸盐阴离子表面活性剂与阳离子(Na+, Ca2+, Mg2+)形成的离子对进行结构优化, 从分子水平上研究表面活性剂与阳离子之间的相互作用. 计算结果表明: 磺酸盐和羧酸盐表面活性剂均采用2:1型, 即极性头中两个氧原子与阳离子发生稳定结合; 在与阳离子结合之前, 表面活性剂分子上的α-亚甲基带有明显的负电荷, 因此将其归为极性头; 但在阳离子电荷诱导下, α-亚甲基转而带有部分弱正电荷, 使极性头范围缩小. 计算也发现, 表面活性剂尾链带有弱正电荷, 使胶束内核带有了部分极性, 利于表面活性剂在溶液中的聚集, 此种极性介于烷烃油相和水相的极性之间.     

Structure formation in metal complex/polymer hybrid nanomaterials prepared by miniemulsion

Polymer/complex hybrid nanostructures were prepared using a variety of hydrophobic metal β-diketonato complexes. The mechanism of structure formation was investigated by electron paramagnetic resonance (EPR) spectroscopy and small-angle X-ray scattering (SAXS) in the liquid phase. Structure formation is attributed to an interaction between free coordination sites of metal β-diketonato complexes and coordinating anionic surfactants. Lamellar structures are already present in the miniemulsion. By subsequent polymerization the lamellae can be embedded in a great variety of different polymeric matrices. The morphology of the lamellar structures, as elucidated by transmission electron microscopy (TEM), can be controlled by the choice of anionic surfactant. Using sodium alkylsulfates and sodium dodecylphosphate, "nano-onions" are formed, while sodium carboxylates lead to "kebab-like" structures. The composition of the hybrid nanostructures can be described as bilayer lamellae, embedded in a polymeric matrix. The metal complexes are separated by surfactant molecules which are arranged tail-to-tail; by increasing the carbon chain length of the surfactant the layer distance of the structured nanomaterial can be adjusted between 2 and 5 nm.     

Vesicles of a new salt-free cat-anionic fluoro/hydrocarbon surfactant system

Weakly basic tetradecyldimethylaminoxide (C14DMAO) molecules can be protonated to form a cationic surfactant, C14DMAOH+, by an acidic fluorocarbon surfactant, an 8-2-fluorotelomer unsaturated acid (C7F15CF==CHCOOH), to form a salt-free cationic and anionic (cat-anionic) fluoro/hydrocarbon surfactant system in aqueous solution. The high Krafft point of C7F15CF==CHCOOH was largely reduced as a result of being mixed with a C14DMAO micelle solution. A study of the phase behavior of the new salt-free cat-anionic fluoro/hydrocarbon surfactant system clearly indicates the existence of a birefringent Lalpha-phase region at (25.0+/-0.1) degrees C. The birefringent Lalpha phase consists of vesicles, which include uni- and multilamellar vesicles with one to dozens of shells, and oligovesicular vesicles, as demonstrated by freeze-fracture and cryo-transmission electron microscopy (FF- and cryo-TEM) images. The size distribution and structural transitions in the salt-free cat-anionic fluoro/hydrocarbon surfactant system were studied by dynamic light scattering (DLS) and 1H and 19F NMR spectroscopy. The formation of a salt-free cat-anionic vesicle phase could be induced by the strong electrostatic interaction between the cationic hydrocarbon C14DMAOH+ and the anionic fluorocarbon C7F15CF==CHCOO-, which provided evidence that the electrostatic interaction between the cationic and anionic surfactants is larger than the nonsynergistic interaction between the stiff fluorocarbon and the soft hydrocarbon chains of the surfactants.     

How Nano‐Ions Act Like Ionic Surfactants

Recently, nanometric ions were shown to adsorb to hydrated neutral surfaces and to bind to the cavities of macrocyclic molecules with an unexpectedly strong affinity arising from a solvent‐mediated effect named superchaotropicity. We show here that nano‐ions at low concentrations (μm range), similarly to anionic surfactants, induce the spontaneous transformation of a swollen lyotropic lamellar phase of non‐ionic surfactant into a vesicle phase. This transition occurs when the neutral lamellae acquire charges, either by adsorption of the nano‐ions onto, or by anchoring of the ionic surfactant into the lamellae. In contrast to ionic surfactants, nano‐ions strongly dehydrate the neutral surfactant assemblies. As a conclusion, these purely inorganic nanometric ions act as alternatives to the widely used organic ionic surfactants.     

The Interaction between High-Molecular-Weight Flocculents and Ionic Surfactants

The interaction between the anionic and cationic polyelectrolytes of various molecular masses and charges and the ionic surfactants in aqueous and salt solutions is studied by viscometry, conductometry, light scattering, and electrophoresis. Oppositely charged molecules of surfactant and polymer form strong complexes due to the forces of electrostatic attraction that is manifested in a significant decrease in the viscosity and light transmission, as well as in the relative reduction in solution conductivity. As the surfactant/polyelectrolyte ratio increases, the forming complexes precipitated and then dissolved again. In the case of strongly charged polyelectrolytes, the partial dissolution of precipitates was observed preceding the wide region of destabilization. In this region, the value of surfactant/polyelectrolyte charge ratio reaches 3–4. The interaction between the cationic surfactants and anionic polyelectrolyte increases with the lengthening of alkyl radical, thus indicating the presence of cooperative interactions between the surfactant molecules bonded to polymer and the important role of relevant hydrophobic interactions. As a result, the interaction between the high-molecular-weight anionic polyelectrolytes and anionic surfactants containing aromatic core takes place in some cases.     

Molecular dynamics simulation of four typical surfactants at oil/water interface

In the present study, we have performed molecular dynamics simulations to describe the microscopic behaviors of the anionic, nonionic, zwitterion, and gemini surfactants at oil/water interface. The abilities of reducing the interfacial tension and forming the stable interfacial film of the four surfactants have been investigated through evaluating interfacial thickness, interface formation energy and radial distribution function. The results show that the four kinds of surfactants can form in stable oil/water interface of monolayer, and the gemini surfactant can form the more stable monolayer. The results of the above three parameters demonstrate that the gemini surfactant has the best simulation effect in the four surfactants. From the calculated interfacial tension values, the gemini surfactant possess the more powerful ability of reducing the interfacial tension than others, so it is more suitable to be used as the surfactant for flooding. In addition, the effects of different electric field intensities on surfactants were calculated, through the radial distribution function of the hydrophilic group in the surfactant and the oxygen atom in the water. We have found that the adding of the periodic electric field can significantly affect the diffusion behavior of the molecules, and nonionic surfactant has stronger demulsification capability than others.     

Interaction between polymer and anionic/nonionic surfactants and its mechanism of enhanced oil recovery

Various experimental methods were used to investigate interaction between polymer and anionic/nonionic surfactants and mechanisms of enhanced oil recovery by anionic/nonionic surfactants in the present paper. The complex surfactant molecules are adsorbed in the mixed micelles or aggregates formed by the hydrophobic association of hydrophobic groups of polymers, making the surfactant molecules at oil-water interface reduce and the value of interfacial tension between oil and water increase. A dense spatial network structure is formed by the interaction between the mixed aggregates and hydrophobic groups of the polymer molecular chains, making the hydrodynamic volume of the aggregates and the viscosity of the polymer solution increase. Because of the formation of the mixed adsorption layer at oil and water interface by synergistic effect, ultra-low interfacial tension (～2.0?×?10^?3 mN/m) can be achieved between the novel surfactant system and the oil samples in this paper. Because of hydrophobic interaction, wettability alteration of oil-wet surface was induced by the adsorption of the surfactant system on the solid surface. Moreover, the studied surfactant system had a certain degree of spontaneous emulsification ability (D50?=?25.04?µm) and was well emulsified with crude oil after the mechanical oscillation (D50?=?4.27?µm).     

Microstructure of un-neutralized hydrophobically modified alkali-soluble emulsion latex in different surfactant solutions

At low pH conditions and in the presence of anionic, cationic, and nonionic surfactants, hydrophobically modified alkali-soluble emulsions (HASE) exhibit pronounced interaction that results in the solubilization of the latex. The interaction between HASE latex and surfactant was studied using various techniques, such as light transmittance, isothermal titration calorimetry, laser light scattering, and electrophoresis. For anionic surfactant, noncooperative hydrophobic binding dominates the interaction at concentrations lower than the critical aggregation concentration (CAC) (C < CAC). However, cooperative hydrophobic binding controls the formation of mixed micelles at high surfactant concentrations (C > or = CAC), where the cloudy solution becomes clear. For cross-linked HASE latex, anionic surfactant binds only noncooperatively to the latex and causes it to swell. For cationic surfactant, electrostatic interaction occurs at very low surfactant concentrations, resulting in phase separation. With further increase in surfactant concentration, noncooperative hydrophobic and cooperative hydrophobic interactions dominate the binding at low and high surfactant concentrations, respectively. For anionic and cationic surfactant systems, the CAC is lower than the critical micelle concentration (CMC) of surfactants in water. In addition, counterion condensation plays an important role during the binding interaction between HASE latex and ionic surfactants. In the case of nonionic surfactants, free surfactant micelles are formed in solution due to their relatively low CMC values, and HASE latexes are directly solubilized into the micellar core of nonionic surfactants.     

DNA‐Surfactant Interactions. Compaction,Condensation, Decompaction and Phase Separation

Recent investigations of the interaction between DNA and alkyltrimethylammonium bromides of various chain lengths are reviewed. Several techniques have been used such as phase map determinations, fluorescence microscopy, and electron microscopy. Dissociation of the DNA‐surfactant complexes, by the addition of anionic surfactant, has received special attention. Precipitation maps for DNA‐cationic surfactant systems were evaluated by turbidimetry for different salt concentrations, temperatures and surfactant chain lengths. Single‐stranded DNA molecules precipitate at lower surfactant concentrations than double‐helix ones. It was also observed that these systems precipitate for very low concentrations of both DNA and surfactant, and that the extension of the two‐phase region increases for longer chain surfactants; these observations correlate well with fluorescence microscopy results, monitoring the system at a single molecule level. Dissociation of the DNA‐cationic surfactant complexes and a concomitant release of DNA was achieved by addition of anionic surfactants. The unfolding of DNA molecules, previously compacted with cationic surfactant, was shown to be strongly dependent on the anionic surfactant chain length; lower amounts of a longer chain surfactant were needed to release DNA into solution. On the other hand, no dependence on the hydrophobicity of the compacting agent was observed. The structures of the aggregates formed by the two surfactants, after the interaction with DNA, were imaged by cryogenic transmission electron microscopy. It is possible to predict the structure of the aggregates formed by the surfactants, like vesicles, from the phase behaviour of the mixed surfactant systems. The compaction of a medium size polyanion with shorter polycations was furthermore studied by means of Monte Carlo simulations. The polyanion chain suffers a sudden collapse as a function of the condensing agent concentration and of the number of charges on the molecules. Further increase of the concentration gives an increase of the degree of compaction. The compaction was found to be associated with the polycations promoting bridging between different sites of the polyanion. When the total charge of the polycations was lower than that of the polyanion, a significant translational motion of the compacting agent along the polyanion was observed, producing only a small‐degree of intrachain segregation. However, complete charge neutralization was not a prerequisite to achieve compacted forms.     

Heat of adsorption of surfactants and its role on nanoparticle stabilization

In this work, the binding between sodium oleate (SO), sodium laurate (SL), sodium dodecyl sulfate (SDS), and sodium dodecylphosphonate (SDP) and iron oxide nanoparticles was systematically investigated using isothermal titration calorimetry (ITC). Comparing the heat exchanged during the isothermal titration with the corresponding surfactant adsorption isotherm, in the cases of SO and SDP, a strong binding takes place at low surfactant concentrations. The binding enthalpy at this low surfactant concentrations depends on the type of surfactant anionic head group. For C12 surfactants, the phosphonate group produced the strongest endothermic binding, followed by the exothermic binding with the carboxylate group, followed by weak exothermic interaction with the sulfate group. For carboxylate surfactants, longer surfactant tails result in larger exothermic binding. Surfactants that exhibited large binding enthalpies also produced more stable suspensions. The Langmuir (L), Freundlich (F), and Langmuir–Freundlich (L–F) adsorption models were used to interpret the adsorption isotherms during the titration with sodium oleate. The L–F adsorption isotherm model was selected to calculate the heat of the formation of the SO monolayer and bilayer on the iron oxide nanoparticles. The L–F model reflects the finite or limited adsorption of the Langmuir model, but accounts for non-homogeneous adsorption of the Freundlich model that help account for surfactant self-assembly before and after adsorption. Coupling the adsorption model with the titration data is possible to calculate the real heat of adsorption of the surfactants on the metal oxide.     

Adsorption of sodium dodecylsulfate on modified carbon adsorbents

The adsorption of anionic surfactants on carbon adsorbents modified with water-soluble derivatives of natural polymers, cellulose and chitin, is considered with sodium dodecylsulfate taken as an example. It is shown that such modification leads to changes in the adsorption structural characteristics and the particle size distribution of carbon-water suspensions of the original adsorbent, and to the emergence of new functional groups on its surface that are able to interact selectively with adsorbate molecules. It is assumed that adsorption of anionic surfactant on carbon adsorbents under equilibrium conditions proceeds via stepwise filling of the carbon??s porous structure: we first observe volume filling of micropores according to their sizes, and then the formation of a surfactant??s monolayer in mesopores and on the outer surface of the adsorbate. It is established by thermal analysis that the thermal stability of carbon adsorbents is enhanced through the preferential localization of anionic surfactants in micropores. The filling of mesopores and the outer carbon surface by surfactant molecules leads to a regular decrease in thermal stability and an increase in the adsorbent surface??s hydrophilicity.     

正、负离子表面活性剂混合体系溶致液晶生成的相行为

研究了烷基(C8,C12,C14)三甲基溴化铵、烷基(C12,C14)溴化吡啶与烷基(C8,C12)硫酸钠混合体系溶致液晶形成的条件与结构的变化.在高浓度的水溶液中,随着正、负离子表面活性剂摩尔比接近于1,液晶结构由六角相过渡为层状相.表面活性剂非极性链长改变,对相行为影响显著,短碳链的正、负离子表面活性剂混合体系,在等摩尔比时,体系为层状液晶或立方液晶为主,夹杂少许沉淀.随碳链增长,两类表面活性剂间的静电吸引效果表现为生成沉淀的摩尔比例范围变宽,沉淀量增多,共存的液晶相减少,甚至消失.若只改变正离子的极性头基,季胺盐比吡啶盐与烷基硫酸盐的作用要强,形成不溶物的混合摩尔比例范围更宽.     

Effect of 1-hexanol on the phase behavior of SDS/CTAB/NaBr/H2O system

Abstract

The influence of 1-hexanol on the phase behavior of sodium dodecyl sulfate (SDS)/cetyltrimethyl ammonium bromide (CTAB)/NaBr/H₂O system has been systematically investigated in this paper. The results showed 1-hexanol effectively dissolved the precipitate formed by the CTAB and SDS surfactants, while liquid crystal (LC) and aqueous two phase system (ATPS) were formed in a wider range. When the molar ratio of 1-hexanol to surfactant is higher than 1, the precipitation in the system disappeared completely and was transformed into ATPS and LC, indicating that alcohol inserted at least evenly between every two surfactant molecules and hence effectively weakened the electrostatic interaction between the anionic and cationic surfactants and limited the formation of precipitation. Polarizing microscope (POM) with crossed polarizers was employed to investigate the textures of liquid crystals. It was shown that the existence of lamellar LC was confirmed by “Maltese crosses” textures. Additionally, we showed that the thermal stability of LC was promising. The ATPS and LC regions remained stable and changed slightly when the temperature was increased from 40 to 70?°C. The results indicated that ATPS and LC of the system were quiet resistant to temperature with the addition of 1-hexanol.     

Interaction of surfactants and aminoindophenol dye

The interaction of dye and surfactants was studied by their spectroscopic and surface properties. Large bathochromic shift (15 nm) in the absorption spectrum was found for aminoindophenol dye at high pH in cationic surfactant, while there is no significant shift in anionic, zwitterionic and nonionic surfactant solutions. The static and dynamic surface properties show there is strong interaction in mixture of cationic surfactant and aminoindophenol dye. Interaction of dye and surfactants on surface and in solution is correlated to the intensity of dye deposition on fiber. The charge complex formation between cationic surfactant and aminoindophenolic dye delays the dye diffusion into keratin fiber. The stronger is the dye/surfactant interaction, the lower dye deposition and diffusion become.     

Hydration of dimethyldodecylamine-N-oxide: enthalpy and entropy driven processes

Dimethyldodecylamine-N-oxide (DDAO) has only one polar atom that is able to interact with water. Still, this surfactant shows very hydrophilic properties: in mixtures with water, it forms normal liquid crystalline phases and micelles. Moreover, there is data in the literature indicating that the hydration of this surfactant is driven by enthalpy while other studies show that hydration of surfactants and lipids typically is driven by entropy. Sorption calorimetry allows resolving enthalpic and entropic contributions to the free energy of hydration at constant temperature and thus directly determines the driving forces of hydration. The results of the present sorption calorimetric study show that the hydration of liquid crystalline phases of DDAO is driven by entropy, except for the hydration of the liquid crystalline lamellar phase which is co-driven by enthalpy. The exothermic heat effect of the hydration of the lamellar phase arises from formation of strong hydrogen bonds between DDAO and water. Another issue is the driving forces of the phase transitions caused by the hydration. The sorption calorimetric results show that the transitions from the lamellar to cubic and from the cubic to the hexagonal phase are driven by enthalpy. Transitions from solid phases to the liquid crystalline lamellar phase are entropically driven, while the formation of the monohydrate from the dry surfactant is driven by enthalpy. The driving forces of the transition from the hexagonal phase to the isotropic solution are close to zero. These sorption calorimetric results are in good agreement with the analysis of the binary phase diagram based on the van der Waals differential equation. The phase diagram of the DDAO-water system determined using DSC and sorption calorimetry is presented.     

Structural control of mesoporous silica nanoparticles in a binary surfactant system

The grain size and regularity of the hexagonal array of mesoporous silica nanoparticles were investigated in a binary surfactant system composed of cetyltrimethylammonium chloride and triblock copolymer EO106PO60EO106. Structural control was achieved by varying the parameters for the prior hydrolysis of silicon alkoxide under an acidic condition and the subsequent assembly of silicates and surfactants under a basic condition. The formation of the mesoscale architectures was based on the balance between the ordered assembly of anionic silicates and the cationic surfactant through electrostatic interaction and the inhibition of grain growth with a nonionic amphiphilic agent through hydrogen bonds.     

表面活性剂中DNA构象变化的研究

以荧光探针法研究了表面活性剂与小牛胸腺DNA的相互作用，结果表明：阳离子表面活性剂主要通过静电引力和疏水方式与DNA作用；阴离子表面活性剂与DNA之间存在静电排斥力，两者之间的相互作用不太明显；而非离子表面活性剂与DNA的相互作用类似于有机溶剂对DNA的影响，即通过溶液的极性、粘度和介电常数来影响DNA的构象，表面活性剂使得DNA构象发生较大的变化，预示了它可能使DNA的生物功能发生较大的变化。     

Phase behavior at low oil contents in systems containing anionic surfactants

The transition from liquid crystalline to microemulsion phases has been investigated by adding oil to surfactant—alcohol—brine mixtures in two systems containing anionic surfactants. At high salinities where the surfactant is preferentially soluble in oil, addition of oil first causes transition from a lamellar liquid crystal to a water-continuous isotropic phase which exhibits streaming birefringence and probably contains large, anisotropic micelles. This isotropic phase inverts to an oil-continuous microemulsion as oil content further increases. At somewhat lower salinities just below the “optimum” where the surfactant has equal solubilization capacities for oil and brine, the system passes through three three-phase regions as oil is added. In order of increasing oil content, these consist of two microemulsions in equilibrium with a lamellar liquid crystalline phase, the same two microemulsions in equilibrium with excess brine, and a microemulsion in equilibrium with excess oil and excess brine.