(Vapor + liquid) equilibria of the binary mixtures of m-cresol with C1-C4 aliphatic alcohols at 95.5 kPa

Bubble point temperatures at 95.5 kPa, over the entire composition range, are measured for the binary mixtures formed by m-cresol with: methanol, ethanol, 1-propanol, 2-propanol, and n-, iso-, sec-, and tert-butanols - using a Swietoslawski-type ebulliometer. The liquid phase composition - bubble point temperature measurements are well represented by the Wilson model. (Vapor + liquid) equilibria predicted from the model are presented.     

The dependence of the enthalpy of solution of L-methionine on the composition of water-alcohol binary solvents at 298.15 K

The integral enthalpies of solution of L-methionine in water-methanol, water-ethanol, water-n-propanol, and water-iso-propanol mixtures were measured calorimetrically at alcohol concentrations x ₂ = 0–0.4 mole fractions. The standard enthalpies of solution (Δ_sol H ^o) and transfer of L-methionine (Δ_tr H ^o) from water to a binary solvent were calculated. The influence of the structure and properties of L-methionine and the composition of aqueous-organic mixtures on its enthalpy characteristics was considered. The enthalpic pair interaction coefficients (h _xy ) between L-methionine and alcohol molecules were calculated; they were positive and increased in the series methanol (MeOH), ethanol (EtOH), n-propanol (n-PrOH), iso-propanol (i-PrOH). The enthalpy characteristics of solution and transfer of L-methionine were compared with those of glycine, L-threonine, L-alanine, and L-valine in similar binary solvents.     

Experimental measurement and modeling of solubility of LiBr and LiNO3 in methanol, ethanol, 1-propanol, 2-propanol and 1-butanol

The solubility of lithium bromide and lithium nitrate in solvents methanol, ethanol, 1-propanol, 2-propanol and 1-butanol were measured in the range between 298.15 and 338.15 K using an analytical gravimetric method. An empirical equation was used to fit the experimental solubilities and the Pitzer model with inclusion of Archer's ionic strength was used for the calculation of osmotic coefficients. The experimental data of system pressures (p) for the correlation of LiBr + ethanol, LiBr + 2-propanol at T (298.15-333.15 K) and LiNO₃ + ethanol at T (298.15-323.15 K) were obtained from published literatures. Moreover, the parameters of the Pitzer model were re-correlated and were used to predict mean ion activity coefficients. A procedure was also presented to predict the solubility products of salts in pure organic solvent.     

Excess enthalpies of binary solvent mixtures of N-methylacetamide with aliphatic alcohols

The molar excess enthalpies H _m ^E of binary solvent mixtures of N-methylacetamide with methanol, ethanol, 1-propanol, 2-propanol, 1-butanol, and t-butanol have been measured with a flow microcalorimeter at 40°C. The excess enthalpies are negative for methanol and positive for the other alcohols over the whole composition range, except for t-butanol which exhibits a sigmoid curve with a deep minimum at low mole fractions of the amide. The values for the primary alcohols increase in the order methanol < ethanol < 1-propanol < 1-butanol. The partial molar excess enthalpies have also been evaluated. Intermolecular interactions in these mixtures are discussed through comparison of the results with those for the corresponding binary mixtures of N,N-dimethylacetamide.     

Solubility of HFCs in lower alcohols

This work is inserted in a research program that consists mainly in the experimental and theoretical study of the effect of association between solute and solvent molecules in the solubility of gases in liquids.The solubilities of hydrofluorocarbons, HFCs, (CH₃F, CH₂F₂, CHF₃) in lower alcohols (methanol, ethanol, 1-propanol, 1-butanol) have been determined in the temperature range [284, 313] K, at atmospheric pressure. An automated apparatus based on Ben-Naim-Baer and Tominaga et al. designs was used, which provides an accuracy of 0.6%. A precision of the same order of magnitude was achieved.To represent the temperature dependence of the mole fraction solubilities, the equation R ln x₂ = A + B/T + C ln T was used. From this equation, the experimental Gibbs energies, enthalpies and entropies of solution at 298 K and 1 atm partial pressure of the gas, were calculated.A semiempirical correlation has been developed between the solubilities of HFCs in alcohols at 298 K and the Gutmann acceptor number of solvents, AN, and reduced dipole moment of the gases, μ*.     

Bubble point temperatures of the binary mixtures of nitrobenzene with C1–C4 aliphatic alcohols at 94.95 kPa

Bubble point temperatures at 94.95 kPa, over the entire composition range, are measured for the binary mixtures of nitrobenzene with: methanol, ethanol, 1-propanol, 2-propanol and n-, iso-, sec- and tert-butanols – using a Swietoslawski-type ebulliometer. The liquid phase composition – bubble point temperature measurements are well represented by the Wilson model.     

Effects of water-alcohol binary solvents on the thermochemical characteristics of L-tryptophane dissolution at 298.15 K

The enthalpies of L-tryptophane solution in water-methanol, water-ethanol, water-1-propanol, and water-2-propanol mixtures at alcohol concentrations of x ₂ = 0–0.4 mole fractions were measured by calorimetry. The standard enthalpies of L-tryptophane solution (Δ_sol H ^°) and transfer (Δ_tr H ^°) from water to the binary solvent were calculated. The influence of the composition of the water-alcohol mixture and the structure and properties of L-tryptophane on the enthalpy characteristics of the latter was considered. The enthalpy coefficients of pair interactions (h _xy ) of L-tryptophane with alcohol molecules were calculated. The coefficients were positive and increased in the series: methanol (MeOH), ethanol (EtOH), 1-propanol (1-PrOH), and 2-propanol (2-PrOH). The solution and transfer enthalpies of L-tryptophane were compared with those of aliphatic amino acids (glycine, L-threonine, DL-alanine, L-valine, and L-phenylalanine) in similar binary solvents.     

Mobile phase selection for the combined use of liquid chromatography–inductively coupled plasma mass spectrometry and electrospray ionisation mass spectrometry

Four different organic solvents: dimethylformamide, 1,4-dioxane, n-propanol and ethanol were evaluated as alternative organic modifiers to acetonitrile for liquid chromatography (LC) separations. The aim was to establish common sets of chromatographic conditions that could be applied for LC hyphenation to inductively coupled plasma mass spectrometry (ICPMS) as well as to electrospray ionization MS (ESIMS). The approach was to evaluate candidate solvents that, compared to acetonitrile, potentially could give improved analytical performance (low solvent vapor loading, maximized analyte sensitivity and minimized carbon depositions on instrumental parts) in ICPMS analysis while retaining chromatographic and ESIMS performances. The study showed that dimethylformamide, 1,4-dioxane, n-propanol and ethanol all can be advantageous chromatographic modifiers for LC–ICPMS analysis, giving superior performance compared to acetonitrile. For the combined use of LC–ICPMS and LC–ESIMS with a common set of chromatographic conditions, n-propanol gave the best overall performance. The ¹⁹⁵Pt⁺ signal in ICPMS was continuously monitored during a 0–60% organic solvent gradient and at 25% of organic modifier, 100% of the signal obtained at the gradient start was preserved for n-propanol compared to only 35% of the signal when using acetonitrile. Platinum detection limits were 5–8 times lower using n-propanol compared with acetonitrile. Signal-to-noise ratio in continuous ESIMS signal measurements was 100, 90 and 110 for a 100 μg/ml solution of leucine–enkephaline using acetonitrile, ethanol and n-propanol, respectively. Chromatographic efficiency in reversed phase separations was preserved for n-propanol compared to acetonitrile for the analysis of the whole protein cytochrome C and the peptide bacitracin on a column with particle and pore sizes of 5 μm and 300 Å, but slightly deteriorated for the separation of the peptides leucine–enkephaline and bacitracin on a 3 μm and 90 Å column as the peak width at half height for both peptides increased by a factor of two. The performance on the smaller dimensioned column could however be improved by running the separations at 40 °C.     

Enthalpies of solution of 1,1,3,3-tetramethylurea in normal and branched alkanols (C2-C4) at 298.15 K

The enthalpies of solution were determined for 1,1,3,3-tetramethylurea in ethanol, 1-propanol, 2-propanol, 1-butanol, and t-butanol (2-methyl-2-propanol). Measurements were made at 298.15 K and molalities m ≅ (0.007 to 0.036) mol · kg⁻¹ with a precise isoperibol ampoule-type calorimeter. Standard enthalpies of solution and transfer from one alkanol to the other (including methanol) were calculated. The obvious relationship between the enthalpic and volumetric effects of solution of tetramethylurea in the n-alkanols (C₁-C₄) was discovered. The enthalpic effects of transfer caused by branching of the alkanol molecules, 1-propanol → 2-propanol, and 1-butanol → t-butanol, are opposite in sign and dominated by the configurational changes in the solvation environment of tetramethylurea.     

Structure of 1-Propanol–Water Mixtures Investigated by Large-Angle X-ray Scattering Technique

Large-angle X-ray Scattering (LAXS) experiments at 298 K have been made on 1-propanol–water mixtures over the whole 1-propanol mole fraction range. The radial distribution functions show that the predominant clusters in 1-propanol–water mixtures change at 1-propanol mole fraction x _1pr = 0.1; the tetrahedral-like structure of water is mainly formed in the mixtures with x _1pr≤ 0.1, while hydrogen-bonded chain clusters of 1-propanol molecules predominate in the mixtures at x _1pr > 0.1. From the present results, together with the previous ones on methanol–water, ethanol–water, and 2-propanol–water mixtures, size and shape effects of the hydrophobic groups on the structure of aliphatic alcohol–water mixtures are discussed at the molecular level. The anomalies of the enthalpies of mixing for 1-propanol–water mixtures at 298 K are interpreted on the basis of the proposed change in structure of the mixtures with 1-propanol mole fraction.     

Excess enthalpies of binary solvent mixtures of N,N-dimethylacetamide with aliphatic alcohols

The excess enthalpies H _m ^E of binary solvent mixtures of N,N-dimethylacetamide with methanol, ethanol, 1-propanol, 2-propanol, 1-butanol, and t-butanol have been measured with a flow microcalorimeter at 40°C. The excess enthalpies increase as the length of the alkyl chain of the primary alcohol increases. The values for methanol are negative, those for ethanol change sign, and those for 1-propanol, and more clearly those for 1-butanol, are positive. The mixtures of the secondary and the tertiary alcohol exhibit mainly positive values of H _m ^E . Solute-solute and solute-solvent interactions in these mixtures are discussed on the basis of the results.     

Excess molar enthalpies and heat capacities of dimethyl sulfoxide + seven normal alkanols at 303.15 K and atmospheric pressure

Excess molar enthalpies and heat capacities of binary mixtures containing dimethyl sulfoxide (DMSO) + seven normal alkanols, namely methanol, ethanol, propan-1-ol, butan-1-ol, hexan-1-ol, octan-1-ol, and decan-1-ol, have been determined at 303.15 K and atmospheric pressure. With the exception of the DMSO-methanol system, which shows negative values, all mixtures show positive values of excess molar enthalpies over the whole range of mole fraction, increasing as the number of carbon atoms increases. Heat capacities of pure components have been determined in the range 288.15 < T (K) < 325.15. Molar heat capacities of the mixtures are always positive and decrease as the number of carbon atoms decreases. The results were fitted to the Redlich-Kister polynomial equation. Molecular interactions in the mixtures are interpreted on the basis of the results obtained.     

Turbidimetric titration and gradient high-performance liquid chromatography of polystyrene samples

Summary Polystyrene samples of narrow molecular-weight distribution have been eluted according to their molecular weight from columns packed with bare silica Si50, phenyl, or C18 bonded phase by gradients of methanol and tetrahydrofuran (THF) or ofiso-octane and THF. Among the six combinations investigated,iso-octane/THF with a silica column formed a proper normal-phase system whereas methanol/THF with a C18 column formed a proper reversed-phase system. The combinations of C18 column andiso-octane/THF or of Si50 column and methanol/THF gradient did not correspond to the approved polarity rules in high-performance liquid chromatography but were nevertheless effective in separating polystyrene mixtures by molecular weight. Methanol andiso-octane are nonsolvents for polystyrene whereas THF is a solvent. The solubility of polystyrene as a function of molecular weight and concentration was determined by means of turbidimetric titration of solutions in THF with the nonsolvents used in the gradients. The solubility and elution characteristics were almost identical on C18 columns or in methanol/THF combinations. The elution from phenyl bonded phase and Si50 columns usingiso-octane/THF gradients required more THF than the solubility experiments. Information is also given on the occurrence of multimodal elution patterns.     

Solubilities of cefodizime disodium in aqueous alcohol mixtures at atmospheric pressure and different temperatures

Using dynamic method and the laser monitoring observation technique, the solubility of cefodizime disodium in water + (ethanol, 1-propanol, and 2-propanol) was measured as a function of temperature from 278.15 K to 318.15 K under atmospheric pressure. The experimental data were correlated with a simple model of molecular thermodynamics for solubility of solid in liquid. The model parameters were fitted, and the solution enthalpies Δ_solH and solution entropies Δ_solS were estimated. Δ_solH and Δ_solS are all positive. The endothermic effect of solution process may be due to the fact that the newly bond energy between cefodizime disodium and solvent molecules is not powerful enough to compensate the energy needed to break the original association bond in various solvents, and the system needs to absorb heat from surroundings and manifests as Δ_solH > 0. The reason for the entropy increase during the dissolution process is that the solutes disrupt the alignment of solvent molecules and therefore reduced the degree of order of the system while they were dissolved in various solvents. The positive Δ_solH and Δ_solS revealed that the dissolution process of cefodizime disodium was an entropy-driven process.     

Development and validation of a chiral HPLC method for rapid screening of allylic alcohol asymmetric epoxidation processes

A simple and rapid HPLC method has been developed using a polysaccharide chiral stationary phase (Chiralpak AD-H) for the resolution of glycidyl tosylate enantiomers. These compounds were obtained by asymmetric epoxidation of allyl alcohol with chiral titanium-tartrate complexes as catalyst after in situ derivatization of the intermediate glycidols. Separations were achieved using two types of mobile phase: a normal-phase (n-hexane), and a polar-phase (methanol or acetonitrile). The influence of the type and concentration of organic modifier in the mobile phase (ethanol or 2-propanol), the flow rate and the column temperature was investigated. In normal-phase mode, the optimized conditions were: n-hexane/ethanol 70/30 (v/v) at a flow rate of 1.2 mL min⁻¹ and 40 °C. In polar-phase mode, the optimized conditions were: methanol at a flow rate of 0.8 mL min⁻¹ and 20 °C. In both cases, analysis time was ≤11 min and the chiral resolution was ≥2. Nevertheless, due to the better Rs obtained in normal-phase mode, only this method was validated to avoid peaks overlapping in real samples. This method was found to be linear in the 5-300 μg mL⁻¹ range (R² > 0.999) with an LOD of 1.5 μg mL⁻¹ for both glycidyl tosylate enantiomers. Repeatability and intermediate precision at three different concentrations levels were below 0.5 and 7.2% R.S.D. for retention time and area, respectively. This method was applied successfully for the determination of glycidyl tosylate enantiomers after in situ derivatization of glycidols obtained in allylic alcohol asymmetric epoxidation processes with chiral titanium-tartrate complexes as catalysts.     

Partial molar volumes of organic solutes in water. XII. Methanol(aq), ethanol(aq), 1-propanol(aq), and 2-propanol(aq) at T = (298 to 573) K and at pressures up to 30 MPa

Density data for dilute aqueous solutions of methanol, ethanol, 1-propanol, and 2-propanol are presented together with partial molar volumes at infinite dilution calculated from the experimental data. The measurements were performed at from T = (298.15 up to 573.15) K and at pressure close to the saturated vapor pressure of water, at p = 30 MPa and at pressure between these limits. The data were obtained using a high-temperature high-pressure flow vibrating-tube densimeter.     

Enantiospecific resolution of rabeprazole by liquid chromatography on amylose-derived chiral stationary phase using photo diode array and polarimetric detectors in series

A simple and rapid liquid chromatographic method for enantioselective separation and determination of R-(+) and S-(−) enantiomers of rabeprazole in drugs and pharmaceuticals using photo diode array (PDA) and polarimetric detectors connected in series was developed. Chiralpak AD-H (250 mm × 4.6 mm) 5 μm column packed with amylose tris(3,5-dimethylphenyl carbamate) as a stationary phase and the mobile phase containing n-hexane:ethanol:2-propanol(75:15:10, v/v/v) in an isocratic mode has yielded baseline separation with resolution greater than 3.0 at 40 °C. Effects of ethanol, 2-propanol and temperature on separation were studied for optimum resolution. Lansoprazole sulphone was used as an internal standard (IS) for quantitative determination of individual enantiomers in bulk drugs as well as pharmaceutical formulations. The method was validated in terms of accuracy, precision and linearity according to ICH guidelines. The linearity of the method was studied in the range of 0.5-50 μg/ml and the r² was >0.9997. The inter- and intra-day precision of assay were determined (R.S.D. < 1%) and the recoveries were in the range of 99.63-100.22% with <1% R.S.D. The limits of detection (LOD) and quantification (LOQ) were 0.02 μg/ml and 0.07 μg/ml for both the enantiomers, respectively.     

Ternary excess molar enthalpies for the mixtures of methanol and ethanol with tetrahydropyran or 1,4-dioxane at 298.15 K

Ternary excess molar enthalpies, H_m^E, at 298.15 K and atmospheric pressure measured by using a flow microcalorimeter are reported for the (methanol+ethanol+tetrahydropyran) and (methanol+ethanol+1,4-dioxane) mixtures. The pseudobinary excess molar enthalpies for all the systems are found to be positive over the entire range of compositions. The experimental results are correlated with a polynomial equation to estimate the coefficients and standard errors. The results have been compared with those calculated from a UNIQUAC associated solution model in terms of the self-association of alcohols as well as solvation between unlike alcohols and alcohols with tetrahydropyran or 1,4-dioxane. The association constants, solvation constants and optimally fitted binary parameters obtained solely from the pertinent binary correlation predict the ternary excess molar enthalpies with an excellent accuracy.     

Enantioseparation of paroxetine intermediate on an amylose-derived chiral stationary phase by supercritical fluid chromatography

The enantioseparation of trans-3-ethoxycarbonyl-4-(4′-fluorophenyl)-1-methyl piperidine-2,6-dione (3), which is one of the important racemic precursors of trans-(−)-paroxetine, has been investigated using supercritical fluid chromatography on a Daicel Chiralpak AD column. Supercritical CO₂ modified with methanol, ethanol and 2-propanol were used as mobile phase. The influence of type and concentration of alcohol modifier on retention factor, enantioselectivity and resolution were studied. Among methanol, ethanol and 2-propanol, 2-propanol was proved to be the most favorable modifier, and 9.5% (v/v) of 2-propanol was the preferred concentration at which racemate 3 could be separated with resolution of 15.86 and retention factor of 6.323. The effects of pressure and temperature were investigated at 9.5% (v/v) of 2-propanol in the pressure range of 12–24 MPa and temperature range of 303.15–318.15 K. It was found that the lower pressure and temperature were favorable to the enantioseparation. Using van’t Hoff plot, the isoenantioselective temperature was calculated to be 410 K. The enantioseparation process was “enthalpically driven” under experimental conditions. Finally, the retention factors were satisfactorily correlated by a simplified lattice–fluid model with average absolute relative deviation (AARD%) of both enantiomers smaller than 1.76%.     

Experimental and predicted excess molar enthalpies of binary mixtures containing 2,2′-oxybis[propane], benzene,butan-1-ol, 2-methylpropan-1-ol, 2-methyl-2-ene-1-propanol at 303.15 K

Excess molar enthalpies H^E have been measured for liquid binary mixtures of 2,2′-oxybis[propane] (diisopropylether ‘DIPE’), or, benzene + butan-1-ol, +2-methylpropan-1-ol (isobutanol), +2-methyl-2-ene-1-propanol (isobutenol), +n-heptane at 303.15 K and constant pressure using a C80, Setaram calorimeter. A Redlich–Kister type equation was used to correlate experimental results.