Enantioselective separation on a naturally chiral surface

Kinked-stepped, high Miller index surfaces of metal crystals are chiral and, therefore, exhibit enantiospecific properties. Previous temperature-programmed desorption (TPD) spectra have shown that the desorption energies of R-3-methylcyclohexanone (R-3-MCHO) on the chiral Cu(643)(R) and Cu(643)(S) surfaces are enantiospecific (J. Am. Chem. Soc. 2002, 124, 2384). Here, a comparison of the TPD spectra from Cu(111), Cu(221), Cu(533), Cu(653)(R&S), and Cu(643)(R&S) surfaces reveals that the enantiospecific desorption occurs from the chiral kink sites on the Cu(643) surfaces. Titration of the chiral kink sites with I atoms confirms this assignment of desorption features in the TPD spectra. Finally, the enantiospecific difference in the desorption energies of R- and S-3-MCHO has been used as the basis for demonstration of an enantioselective, kinetic separation of racemic 3-MCHO into its purified components during adsorption and desorption on the Cu(643)(R&S) surfaces.     

Enantiospecific desorption of chiral compounds from chiral Cu(643) and achiral Cu(111) surfaces

Temperature-programmed desorption (TPD) experiments have been conducted to investigate enantiospecific desorption from chiral single-crystal surfaces. The (643) and (six four three) planes of face-centered cubic metals such as Cu have kinked and stepped structures which are nonsuperimposable mirror images of one another and therefore are chiral. These chiral surfaces are denoted Cu(643)(R) and Cu(643)(S). We have observed that the desorption energies of (R)-3-methylcyclohexanone and (R)- and (S)-propylene oxides from the Cu(643)(R) and Cu(643)(S) surfaces depend on the relative handedness of the adsorbate/substrate combination. Since the (643) surface is comprised of terraces with local (111) orientation which are separated by kinked monatomic steps, it is instructive to perform TPD experiments with these chiral compounds on the achiral Cu(111) surface. These experiments have given some insight into the adsorption sites for the chiral molecules on the Cu(643) surfaces. There are several high-temperature features in the TPD spectra of the chiral compounds that only appear in the spectra from the (643) surfaces and thus are attributed to molecules adsorbed at or near the kinked steps. In addition there are lower temperature desorption features observed on the Cu(643) surfaces which occur in the same temperature range as desorption features observed on the Cu(111) surface. These features observed on the (643) surfaces are attributed to desorption from the flat (111) terraces.     

Mechanistic insights into the proline-directed enantioselective heterogeneous hydrogenation of isophorone

The adsorption rates onto a range of platinum single-crystal surfaces of key species involved in the proline-directed heterogeneous enantioselective hydrogenation of isophorone were investigated by electrochemical means. Specifically, the uptakes of the prochiral reactant (isophorone), the chiral hydrogenation product (3,3,5-trimethylcyclohexanone), and the chiral directing agent ((R)- and (S)-proline) were examined. The effects of R,S chiral kink sites on the adsorption of (R,S)-proline were also studied. The reactant adsorbs approximately 105 times faster than the chiral modifier so that under conditions of competitive adsorption the latter is entirely excluded from the metal surface. Supplementary displacement and reaction rate measurements carried out with practical Pd/carbon catalysts show that under certain reaction conditions isophorone quickly displaces preadsorbed proline from the metal surface. Thus both kinetics and thermodynamics ensure that the chiral modifier can play no role in any surface-mediated process that leads to enantiodifferentiation. These results are fully consistent with the recent proposal1 that the crucial step leading to enantiodifferentiation occurs in the solution phase and not at the metal surface. In addition, it is found that there is no preferred diastereomeric interaction between (R,S)-proline and R,S step kink sites on Pt{643} and Pt{976}, implying that such sites do not play a role in determining the catalytic behavior of supported metal nanoparticles.     

Electrocatalytic properties of Pt(111), Pt(332), Pt(331) and Pt(110) single crystal electrodes towards ethylene glycol oxidation in sulphuric acid solutions

In the present paper four platinum single crystal electrodes, two basal planes of Pt(111) and Pt(110) and two stepped surfaces of Pt(332) and Pt(331), were prepared and used in the study of electro-oxidation of ethylene glycol (EG). All of these Pt single crystal electrodes belong to the [1 0] zone of crystallography, and exhibit on their surface (111) symmetry sites or certain combinations of terraces of (111) symmetry with steps of (111) symmetry type. It has been found that as a result of a favourable steric matching of surface sites the Pt(110) electrode manifested a higher activity both for EG dissociative adsorption and oxidation than that of the Pt(111) electrode. The stepped surfaces of Pt(332) and Pt(331) operated with certain combinations of characteristics of Pt(111) and Pt(110). The best electrocatalytic properties have been obtained with a Pt(331) electrode, and this is attributed both to the configuration of the atomic arrangement and to the stability of this surface.In summary, the above results show that the performance of a given Pt single crystal electrode in EG oxidation at a potential below 1.0 V may be evaluated by three factors.

1. (1) The ability to resist self-poisoning (AB) which describes the difficulty of EG dissociative adsorption on the electrode surface.

2. (2) The activity for EG oxidation (AC). In considering that the threshold potential for EG oxidation on all electrodes is at 0.3 V and that the self-poisoning is encountered in PGPS, the activity for EG oxidation may be reasonably characterized by the intensity of the peak current acquired in NGPS near 0.6 V, which corresponds to the maximum current of EG oxidation on an activated (non-poisoned) surface of the electrode.

3. (3) The stability of activity during potential cycling (SA) between 0.05 and 1.0 V, which describes the resistance to the decrease of intensity of the EG oxidation current during voltammetric cycling.

For the two basal planes studied, the AB and SA of Pt(111) are higher than those of Pt(110), but its AC is much lower than that of Pt(110). These differences are clearly related to the surface atomic arrangement of the two electrodes. As has been discussed above, the surface of Pt(111) is atomically smooth and stable during voltammetric cycling. The surface of Pt(110) presents, however, atomic steps and is reconstructed under experimental conditions, i.e. certain steric configurations are encountered on the Pt(110) surface. The high AC and the low AB may be assigned to a favourite stereographic matching during EG adsorption and oxidation on Pt(110).The two electrodes with stepped surfaces, Pt(332) and Pt(331), contain different densities of (110) sites, which are formed on the border between terrace and step, as shown in Fig. 8. The AB of these two electrodes has been observed at a moderate range between that of Pt(111) and the AB of Pt(110). With a majority of (111) sites on its surface, the electrode of Pt(332) operates at a relatively higher AC than Pt(111) does, and its SA is not as good as that of Pt(111) but is much better than the SA of a Pt(110) electrode. In all cases the highest AC and SA are obtained with a Pt(331) electrode. It may be seen from the profile of a (331) plane (shown by the cross-section of A-A in Fig. 8) that all atoms on the top of the surface participated in forming (110) sites, and the atom on the step has two functions — one is to form a (110) site with an atom located in the terrace of second layer and the other is to form a (111) site in the terrace of the same layer. It has been mentioned in the above discussions that the Pt(110) electrode keeps a higher AC due to favourite stereographic matching in EG adsorption and oxidation, but its SA is the worst, due to the instability of the surface. The highest AC and SA obtained with Pt(331) may be ascribed not only to the high density of (110) sites existing on the surface, but also to the stabilization of these (110) sites, and moreover, the synergy generated by the atomic arrangement of the Pt(331) surface may also contribute to the performance of the Pt(331) electrode.     

Tellurium adatoms as an in-situ surface probe of (111) two-dimensional domains at platinum surfaces

Irreversibly adsorbed tellurium has been studied as a probe to quantify ordered domains in platinum electrodes. The surface redox process of adsorbed tellurium on the Pt(111) electrode and Pt(111) stepped surfaces takes place around 0.85 V in a well-defined peak. The behavior of this redox process on the Pt(111) vicinal surfaces indicates that the tellurium atoms involved in the redox process are only those deposited on the (111) terrace sites. Moreover, the corresponding charge density is proportional to the number of sites on (111) ordered domains (terraces) that are, at least, three atoms wide. Hence, this charge density can be used to measure the number of (111) terrace sites on any given platinum sample. Structural information about tellurium adsorption is obtained from atomic-resolution STM images for the Pt(111) and Pt(10, 10, 9) electrodes. A rectangular structure (2 x radical 3) and a compact hexagonal structure (11 x 8) were identified. However, the redox peak for adsorbed tellurium on (100) domains at 1.03 V overlaps with peaks arising from steps and (110) sites. Therefore, it cannot be used without problems for the determination of (100) sites on a platinum sample. On the (100) terraces, the surface structure of the adsorbed tellurium is c(2 x 2), as revealed by STM. Finally, tellurium irreversible adsorption has been used to estimate the number of (111) ordered domains terrace sites on different polycrystalline platinum samples, and the results are compared to those obtained with bismuth irreversible adsorption.     

A site-selective in situ study of CO adsorption and desorption on Pt(355)

Using time-dependent high-resolution x-ray photoelectron spectroscopy at BESSY II, the adsorption and desorption processes of CO on stepped Pt(355) = Pt[5(111) x (111)] were investigated. From a quantitative analysis of C 1s data, the distribution of CO on the various adsorption sites can be determined continuously during adsorption and desorption. These unique data show that the terrace sites are only occupied when the step sites are almost saturated, even at temperatures as low as 130 K. The coverage-dependent occupation of on-top and bridge adsorption sites on the (111) terraces of Pt(355) is found to differ from that on Pt(111), which is attributed to the finite width of the terraces and changes in adsorbate-adsorbate interactions. In particular, no long-range order of the adsorbate layer could be observed by low-energy electron diffraction. Further details are derived from sticking coefficient measurements using the method devised by King and Wells [Proc. R. Soc. London, Ser. A 339, 245 (1974)] and temperature-programmed desorption. The CO saturation coverage is found to be slightly smaller on the stepped surface as compared to that on Pt(111). The initial sticking coefficient has the same high value of 0.91 for both surfaces.     

Stripping voltammetry of carbon monoxide oxidation on stepped platinum single-crystal electrodes in alkaline solution

The electrochemical oxidation of a CO adlayer on Pt[n(111)x(111)] electrodes, with n = 30, 10, and 5, Pt(111), Pt(110) as well as a Pt(553) electrode (with steps of (100) orientation) in alkaline solution (0.1 M NaOH) has been studied using stripping voltammetry. On these electrodes, it is possible to distinguish CO oxidation at four different active oxidation sites on the surface, i.e. sites with (111), (110) and (100) orientation, and kink sites. The least active site for CO oxidation is the (111) terrace site. Steps sites are more active than the (111) terrace sites, the (110) site oxidizing CO at lower potential than the (100) site. The CO oxidation feature with the lowest overpotential (oxidation potential as low as 0.35 V vs. RHE) was ascribed to oxidation of CO at kink sites. The amount of CO oxidized at the active step or kink sites vs. the amount of CO oxidized at the (111) terrace sites depends on the concentration of the active sites and the time given for the terrace-bound CO to reach the active site. By performing CO stripping on the stepped surfaces at different scan rates, the role of CO surface diffusion is probed. The possible role of electronic effects in explaining the unusual activity and dynamics of CO adlayer oxidation in alkaline solution is discussed.     

Electro-oxidation of carbon monoxide on well-ordered Pt(111)/Sn surface alloys

The electro-oxidation of CO on model platinum-tin alloy catalysts has been studied by ex-situ electrochemical measurements following the preparation of the Pt(111)/Sn(2x2) and Pt(111)/Sn(radical3 x radical3)R30 degrees surfaces. A surface redox couple, which is associated with the adsorption/desorption of hydroxide on the Sn sites, is observed at 0.28 V(RHE)/0.15 V(RHE) in H(2)SO(4) electrolyte on both surfaces. Evidence that it is associated with the adsorption of OH comes from ex-situ photoemission measurements, which indicate that the Sn atoms are in a metallic state at potentials below 0.15 V(RHE) and an oxidized state at potentials above 0.28 V(RHE). Specific adsorption of sulfate anions is not associated with the surface process since there is no evidence from photoemission of sulfate adsorption, and the same surface couple is observed in the HClO(4) electrolyte. CO is adsorbed from solution at 300 K, with saturation coverages of 0.37 +/- 0.05 and 0.2 +/- 0.05 ML, respectively. The adsorbed CO is oxidatively stripped at the potential coincident with the adsorption of hydroxide on the tin sites, viz., 0.28 V(RHE). This strong promotional effect is unambiguously associated with the bifunctional mechanism. The Sn-induced activation of water, and promotion of CO electro-oxidation, is sustained as long as the alloy structure remains intact, in the potential range below 0.5 V(RHE). The results are discussed in the light of the requirements for CO-tolerant platinum-based electrodes in hydrogen fuel cell anode catalysts and catalysts for direct methanol electro-oxidation.     

Probing enantioselectivity on chirally modified Cu(110), Cu(100), and Cu(111) surfaces

Temperature programmed desorption methods have been used to probe the enantioselectivity of achiral Cu(100), Cu(110), and Cu(111) single crystal surfaces modified by chiral organic molecules including amino acids, alcohols, alkoxides, and amino-alcohols. The following combinations of chiral probes and chiral modifiers on Cu surfaces were included in this study: propylene oxide (PO) on L-alanine modified Cu(110), PO on L-alaninol modified Cu(111), PO on 2-butanol modified Cu(111), PO on 2-butoxide modified Cu(100), PO on 2-butoxide modified Cu(111), R-3-methylcyclohexanone (R-3-MCHO) on 2-butoxide modified Cu(100), and R-3-MCHO on 2-butoxide modified Cu(111). In contrast with the fact that these and other chiral probe/modifier systems have exhibited enantioselectivity on Pd(111) and Pt(111) surfaces, none of these probe/modifier/Cu systems exhibit enantioselectivity at either low or high modifier coverages. The nature of the underlying substrate plays a significant role in the mechanism of hydrogen-bonding interactions and could be critical to observing enantioselectivity. While hydrogen-bonding interactions between modifier and probe molecule are believed to induce enantioselectivity on Pd surfaces (Gao, F.; Wang, Y.; Burkholder, L.; Tysoe, W. T. J. Am. Chem. Soc. 2007, 129, 15240-15249), such critical interactions may be missing on Cu surfaces where hydrogen-bonding interactions are believed to occur between adjacent modifier molecules, enabling them to form clusters or islands.     

Enantioselective surface chemistry of R-2-bromobutane on Cu(643)R&S and Cu(531)R&S

The enantioselective surface chemistry of chiral R-2-bromobutane was studied on the naturally chiral Cu(643)R&S and Cu(531)R&S surfaces by comparing relative product yields during temperature-programmed reaction spectroscopy. Molecularly adsorbed R-2-bromobutane can desorb molecularly or debrominate to form R-2-butyl groups on the surfaces. The R-2-butyl groups react further by beta-hydride elimination to form 1- or 2-butene or by hydrogenation to form butane. Temperature-programmed reaction spectroscopy was used to quantify the relative yields of the various reaction products. At low coverages of R-2-bromobutane on Cu(643)R&S and Cu(531)R&S, the surface chemistry is not enantioselective. At monolayer coverage, however, the product yields indicate that the R-2-bromobutane decomposition reaction rates are sensitive to the handedness of the two chiral surfaces. The impact of surface structure on enantioselectivity was examined by studying the chemistry of R-2-bromobutane on both Cu(643)R&S and Cu(531)R&S. The selectivity of R-2-bromobutane desorption versus debromination is enantiospecific and differs significantly from Cu(643) to Cu(531). The selectivity of the R-2-butyl reaction by beta-hydride elimination versus hydrogenation is only weakly enantiospecific and is similar on both the Cu(643) and Cu(531) surfaces. These results represent the first quantitative observations of enantioselectivity in reactions with well-known mechanisms probed using a simple adsorbate on naturally chiral metal surfaces.     

Chiral templating of surfaces: adsorption of (S)-2-methylbutanoic acid on Pt(111) single-crystal surfaces

The adsorption and thermal chemistry of (S)-(+)-2-methylbutanoic acid ((S)-2MBA) on Pt(111) single-crystal surfaces was characterized by using temperature programmed desorption (TPD) and reflection-adsorption infrared (RAIRS) spectroscopies. Particular emphasis was placed on the characterization of the chiral superstructures formed upon the deposition of the submonolayer coverages of enantiopure (S)-2-methylbutanoate species that are produced by thermal dehydrogenation of the (S)-2MBA. The enantioselectivity of the empty platinum sites left open on those structures were identified by their difference in behavior toward the adsorption of the two enantiomers of propylene oxide. It was found that a significant enhancement in adsorption is possible on surfaces with the same chirality of the probe molecule, specifically that the uptake of (S)-propylene oxide is larger than that of (R)-propylene oxide on (S)-2-methylbutanoate adsorbed layers. This contrasts with the lack of enantioselectivity previously reported for the same adsorbate on Pd(111). Detectable differences in adsorption energetics of (R)- vs (S)-propylene oxide on the (S)-2-methylbutanoate/Pt(111) overlayers were measured but deemed not to be the controlling factor in the enantioselectivity reported in this system.     

Ammonia selective oxidation on Pt(100) sites in an alkaline medium

The oxidation of ammonia on platinum surfaces is a structure sensitive reaction that takes place almost exclusively on Pt(100) sites. This report shows how dependent the activity is on different arrangements of (100) sites of platinum. The effect of two-dimensional domains has been addressed by using stepped surfaces having terraces with (100) geometry, either with (111) and (110) steps. The results were compared with those obtained from stepped surfaces having terraces with (111) or (110) symmetry and monatomic (100) steps, thus representing monodimensional (100) domains. The observed behavior confirms the extreme sensitivity of the reaction to the different arrangement of this type of square sites.     

Effects of the surface mobility on the oxidation of adsorbed CO on platinum electrodes in alkaline media. The role of the adlayer and surface defects

The oxidation of adsorbed CO on Pt single crystal electrodes has been studied in alkaline media. The surfaces used in this study were the Pt(111) electrode and vicinal stepped and kinked surfaces with (111) terraces. The kinked surfaces have either (110) steps broken by (100) kinks or (100) steps broken by (110) kinks and different kink densities. The voltammetric profiles for the CO stripping on those electrodes show peaks corresponding to the oxidation of CO on the (111) terraces, on the (100) steps/kinks and on the (110) steps/kinks at very distinctive potentials. Additionally, the stripping voltammograms always present a prewave. The analysis of the results with the different stepped and kinked surfaces indicates that the presence of the prewave is not associated with defects or kinks in the electrode surface. Also, the clear separation of the CO stripping process in different peak contributions indicates that the mobility of CO on the surface is very low. Using partial CO stripping experiments and studies at different pH, it has been proposed that the low mobility is a consequence of the negative absolute potential at which the adlayers are formed in alkaline media. Also, the surface diffusion coefficient for CO in these media has been estimated from the dependence of the stripping charge of the peaks with the scan rate of the voltammetry.     

氢原子在Pt及Pt系双金属催化表面吸附的密度泛函理论研究

采用密度泛函理论(dFT)考察了Pt(100)、(110)、(111)三种表面氢原子的吸附行为, 计算了覆盖度为0.25 ML时氢原子在Pt 三种表面和M-Pt(111)双金属(M=Al, Fe, Co, Ni, Cu, Pd)上的最稳定吸附位、表面能以及吸附前后金属表面原子层间弛豫情况. 分析了氢原子在不同双金属表面吸附前后的局域态密度变化以及双金属表面d 带中心偏离费米能级的程度并与氢吸附能进行了关联. 计算结果表明, 在Pt(100), Pt(110)和Pt(111)表面, 氢原子的稳定吸附位分别为桥位、短桥位和fcc 穴位. 三种表面中以Pt(111)的表面能最低, 结构最稳定. 氢原子在不同M-Pt(111)双金属表面上的最稳定吸附位均为fcc 穴位, 其中在Ni-Pt 双金属表面的吸附能最低, Co-Pt 次之. 表明氢原子在Ni-Pt 和Co-Pt 双金属表面的吸附最稳定. 通过对氢原子在M-Pt(111)双金属表面吸附前后的局域态密度变化的分析, 验证了氢原子吸附能计算结果的准确性. 掺杂金属Ni、Co、Fe 的3d-Pt(111)双金属表面在吸附氢原子后发生弛豫, 第一层和第二层金属原子均不同程度地向外膨胀. 此外, 3d金属的掺入使得其对应的M-Pt(111)双金属表面d带中心与Pt 相比更靠近费米能级, 吸附氢原子能力增强, 表明3d-Pt系双金属表面有可能比Pt具有更好的脱氢活性.     

CO在Pt(111)和Pt-M(111)(M=Ni,Mg)表面吸附的理论研究

采用密度泛函理论与周期性平板模型相结合的方法,对CO在Pt(111)表面top,fcc,hcp和bridge 4个吸附位和Pt-M(111)(M=Ni,Mg)表面h-top,M-top,Pt(M)Pt-bridge,Pt(M)M-bridge,Pt(Pt)M-bridge,M(Pt)M-bridge,Pt1M2-hcp...     

Structure sensitivity of methanol electrooxidation pathways on platinum: an on-line electrochemical mass spectrometry study

By monitoring the mass fractions of CO(2) (m/z 44) and methylformate (m/z 60, formed from CH(3)OH + HCOOH) with on-line electrochemical mass spectrometry (OLEMS), the selectivity and structure sensitivity of the methanol oxidation pathways were investigated on the basal planes--Pt(111), Pt(110), and Pt(100)--and the stepped Pt electrodes--Pt(554) and Pt(553)--in sulfuric and perchloric acid electrolytes. The maximum reactivity of the MeOH oxidation reaction on Pt(111), Pt(110), and Pt(100) increases in the order Pt(111) < Pt(110) < Pt(100). Mass spectrometry results indicate that the direct oxidation pathway through soluble intermediates plays a pronounced role on Pt(110) and Pt(111), while, on Pt(100), the indirect pathway through adsorbed carbon monoxide is predominant. In 0.5 M H(2)SO(4), introducing steps in the (111) plane increases the total reaction rate, while the relative importance of the direct pathway decreases considerably. In 0.5 M HClO(4), however, introducing steps increases both the total reaction rate and the selectivity toward the direct oxidation pathway. Anion (sulfate) adsorption on (111) leads to a more prominent role of the direct pathway, but, on all the other surfaces, (bi)sulfate seems to block the formation of soluble intermediates. For both electrolytes, increasing the step density results in more methylformate being formed relative to the amount of CO(2) detected, indicating that the [110] steps themselves catalyze the direct oxidation pathway. A detailed reaction scheme for the methanol oxidation mechanism is suggested based on the literature and the results obtained here.     

Scanning Tunnelling Microscopy Study of Chloride Adsorbed on Cu(110) Surfaces in Hydrochloric Acid Solution

Fundamental studies of the interaction of chloride with copper is of great interest from both scientific and technological view points since it is related to the copper electroplating and also the halogen etching processes^[1]. In this paper, in-situ scanning tunneling microscopy (STM) has been employed to study chloride adsorption on Cu(110) electrode in hydrochloride acid aqueous solution. The atomic resolution images of chloride adsorbed on Cu(111) surface have been obtained over the potential range from -400 mV to -100 mV (vs. SCE). A (l×l) structure for Cu(110) substrate was observed at the potential negative than -450 mV in which the chloride anions are desorbed. Our results indicate that the chloride anions are very strongly adsorbed on the Cu(110) surface at the potential positive than -400 mV. The images taken over a large region show parallel rows on the terraces and monolayer straight steps, which run along the[001] direction of the substrate lattice. The parallel row structures observed here are suggested to attribute from the chloride adlayers. The different corrugation height and periodical modulation in the height along[110] direction observed indicates that chloride anions are located at physically non-equivalent binding sites. Models are proposed to interpret the structures with three-fold periodicity and four-fold periodicity along[110] direction with a (4×1) structure containing three chloride anions and a (5×1) structure containing four chloride anions, respectively.     

CO organization at ambient pressure on stepped Pt surfaces: first principles modeling accelerated by neural networks

Step and kink sites at Pt surfaces have crucial importance in catalysis. We employ a high dimensional neural network potential (HDNNP) trained using first-principles calculations to determine the adsorption structure of CO under ambient conditions (T = 300 K and P = 1 atm) on these surfaces. To thoroughly explore the potential energy surface (PES), we use a modified basin hopping method. We utilize the explored PES to identify the adsorbate structures and show that under the considered conditions several low free energy structures exist. Under the considered temperature and pressure conditions, the step edge (or kink) is totally occupied by on-top CO molecules. We show that the step structure and the structure of CO molecules on the step dictate the arrangement of CO molecules on the lower terrace. On surfaces with (111) steps, like Pt(553), CO forms quasi-hexagonal structures on the terrace with the top site preferred, with on average two top site CO for one multiply bonded CO, while in contrast surfaces with (100) steps, like Pt(557), present a majority of multiply bonded CO on their terrace. Short terraced surfaces, like Pt(643), with square (100) steps that are broken by kink sites constrain the CO arrangement parallel to the step edge. Overall, this effort provides detailed analysis on the influence of the step edge structure, kink sites, and terrace width on the organization of CO molecules on non-reconstructed stepped surfaces, yielding initial structures for understanding restructuring events driven by CO at high coverages and ambient pressure.

A neural network potential trained using first-principles calculations enables to understand the adsorption configurations of carbon monoxide on stepped Pt surfaces at ambient pressure.     

Selective electrocatalysis of acetaldehyde oxime reduction on (111) sites of platinum single crystal electrodes and nanoparticles surfaces

The reduction of acetaldehyde oxime (AO) in acid medium on platinum surfaces is a structure sensitive reaction that takes place almost exclusively on (111) sites of Pt electrodes, and it is strongly inhibited on Pt(100) and Pt(110) surfaces. A study using stepped electrodes with (111) terraces and monoatomic steps either with (100) and (110) orientation shows that the activity of the electrode is also dependent on the terrace width, i.e., the wider the terrace is, the higher current density is recorded and the more positive the peak potential for AO reduction appears. Moreover, in the electrodes with (100) step sites, the reduction process appears at more negative potential than the electrodes with (111) step sites. Nanoparticles with some preferential orientations were also tested for the AO reduction reaction to check the presence of (111) ordered domains on the nanoparticles surface. Dedicated to Teresa Iwasita on the occasion of her retirement and for her contributions to Electrochemistry.     

Optical recognition of surface chirality at Au(hkl) single crystalline surfaces by second harmonic generation rotational anisotropy

Two-dimensional chirality at naturally chiral gold single crystalline surfaces was detected and characterized using optical second harmonic generation (SHG) measurements. SHG rotational anisotropy (SH-RA) patterns at Au(643)S and Au(643)R surfaces were mirror symmetric to each other. Systematic SH-RA measurements at chiral Au(hkl) surfaces with the same step and kink structures but different (111) terrace widths showed a linear correlation between surface step density and SH-RA fitting parameters arising from defects. These results indicate that SH-RA measurements provide information not only on surface chirality but also on density of surface defects.