Synthesis of enantiopure omega-functionalized C15 alpha-amino carboxylates

An efficient route for the synthesis of enantiopure omega-hydroxy, omega-carboxy, omega-oxo, and omega-amino alpha-amino acids and bis-alpha-amino acids was developed. The synthesis of omega-trityloxy delta,epsilon-unsaturated alpha-amino acids was based on the Wittig reaction of methyl (2S)-2-[bis(tert-butoxycarbonyl)amino]-5-oxopentanoate with omega-trityloxy alkylidene triphenylphosphoranes. After hydrogenation, the omega-hydroxy alpha-amino acid was used as starting material for the synthesis of other omega-functionalized alpha-amino acids. The length of the side chain of alpha-amino acids or bis-alpha-amino acids depends on the starting alkanediol or dibromide used to prepare the phosphoranes.     

Synthesis and structures of crystalline Li, Al and Sn(II) 1-azaallyls and beta-diketiminates derived from [Li{mu,eta3-N(SiMe3)C(Ad)C(H)SiMe3}]2 (Ad = 1-adamantyl)

The crystalline dimeric 1-azaallyllithium complex [Li{mu,eta(3-N(SiMe3)C(Ad)C(H)SiMe3}]2 (1) was prepared from equivalent portions of Li[CH(SiMe3)2] and 1-cyanoadamantane (AdCN). Complex was used as precursor to each of the crystalline complexes 2-8 which were obtained in good yield. By 1-azaallyl ligand transfer, 1 afforded (i) [Al{eta3-N(SiMe3)C(Ad)C(H)SiMe3}{kappa1-N(SiMe3)C(Ad)=C(H)SiMe3-E}Me] (5) with [AlCl2Me](2), (ii) [Sn{eta3-N(SiMe3)C(Ad)C(H)SiMe3}2] (7) with Sn[N(SiMe3)2]2, and (iii) [Li(N{C(Ad)=C(H)SiMe3-E}{Si(NN)SiMe3})(thf)2] (8) with the silylene Si[(NCH(2)Bu(t))2C6H(4)-1,2] [= Si(NN)]. By insertion into the C[triple bond, length as m-dash]N bond of the appropriate cyanoarene RCN, gave the beta-diketiminate [Li{mu-N(SiMe3)C(Ad)C(H)C(R)NSiMe3}]2 [R = Ph (2), C(6)H(4)Me-4 (3)], and yielded [Al{kappa2-N(SiMe3)C(Ad)C(H)C(Ph)NSiMe3}{kappa1-N(SiMe3)C(Ad)=C(H)SiMe3-E}Me] (6). The beta-diketiminate [Al{kappa2-N(SiMe3)C(Ad)C(H)C(Ph)NSiMe3}Me2] (4) was prepared from 2 and [AlClMe2]2. The X-ray structures of 1 and 3-8 are presented. Multinuclear NMR spectra in C6D6 or C6D5CD3 have been recorded for each of 1-8; such data on 8 revealed that in solution two minor isomers were also present.     

Synthesis and structure of cyclic phosphate, phosphoramidate, phosphonates, and phosphonium salts. Phosphatrane formation

Reaction of tris(2-hydroxy-3,5-dimethylbenzyl)amine (6) with phosphorus reagents led to the formation of the phosphoramidate, N[CH2(Me2C6H2)O]2PO (1), the phosphate N[CH2(Me2C6H2)O]2[CH2(Me2C6H2)OH]P(O)(OPh) (2), the phosphonium salts N[CH2(Me2C6H2)O]3PMe+I- (3A) and N[CH2(Me2C6H2)O]3PMe+I3- (3B), and the phosphonates N[CH2(Me2C6H2)O]2[CH2(Me2C6H2)OH]P(O)Me (4) and N[CH2(Me2C6H2)O]2[CH2(Me2C6H2)OSiMe3]P(O)Me (5). X-ray analysis provided molecular structures for all of the compounds. The solid-state structural representations were supported in solution by an analysis of the NCH2 proton NMR patterns. The structures of 3A and 3B show the presence of phosphatranes with weak P-N donor interactions. These represent the first phosphatranes containing all six-membered rings. Variable temperature analysis of the 1H NMR spectra of 3A indicates fluxional behavior whereby a racemic mixture of the chiral phosphonium salt rapidly intraconverts at room temperature. The activation energy for the enantiomeric conversion of the clockwise and anticlockwise orientations of the propeller-like phosphatrane is 11.2 kcal/mol, which is compared to that of the isoelectronic silatrane N[CH2(Me2C6H2)O]3SiMe (E), 10.3 kcal/mol.     

C7 and C9 carbon-rich bridges in diruthenium systems: synthesis, spectroscopic, and theoretical investigations of different oxidation States

Two methodologies of C-C bond formation to achieve organometallic complexes with 7 or 9 conjugated carbon atoms are described. A C7 annelated trans-[Cl(dppe)2Ru=C=C=C-CH=C(CH2)-C[triple bond]C-Ru(dppe)2Cl][X] (X = PF6, OTf) complex is obtained from the diyne trans-[Cl(dppe)2Ru-(C[triple bond]C)2-R] (R = H, SiMe3) in the presence of [FeCp2][PF6] or HOTf, and C7 or C9 complexes trans-[Cl(dppe)2Ru-(C[triple bond]C)n-C(CH3)=C(R1)-C(R2)=C=C=Ru(dppe)2Cl][X] (n = 1, 2; R1 = Me, Ph, R2 = H, Me; X = BF4, OTf) are formed in the presence of a polyyne trans-[Cl(dppe)2Ru-(C[triple bond]C)n-R] (n = 2, 3; R = H, SiMe3) with a ruthenium allenylidene trans-[Cl(dppe)2Ru=C=C=C(CH2R1)R2][X]. These reactions proceed under mild conditions and involve cumulenic intermediates [M+]=(C=)nCHR (n = 3, 5), including a hexapentaenylidene. A combination of chemical, electrochemical, spectroscopic (UV-vis, IR, NIR, EPR), and theoretical (DFT) techniques is used to show the influence of the nature and conformation of the bridge on the properties of the complexes and to give a picture of the electron delocalization in the reduced and oxidized states. These studies demonstrate that the C7 bridging ligand spanning the metal centers by almost 12 angstroms is implicated in both redox processes and serves as a molecular wire to convey the unpaired electron with no tendency for spin localization on one of the halves of the molecules. The reactivity of the C7 complexes toward protonation and deprotonation led to original bis(acetylides), vinylidene-allenylidene, or carbyne-vinylidene species such as trans-[Cl(dppe)2Ru[triple bond]C-CH=C(CH3)-CH=C(CH3)-HC=C=Ru(dppe)2Cl][BF4]3.     

The metalla-Pinner reaction between Pt(IV)-bound nitriles and alkylated oxamic and oximic forms of hydroxamic acids

The nitrile ligands in the platinum(IV) complexes trans-[PtCl4(RCN)2] (R=Me, Et, CH2Ph) and cis/trans-[PtCl4(MeCN)(Me2SO)] are involved in a metalla-Pinner reaction with N-methylbenzohydroxamic acid (N-alkylated form of hydroxamic acid, hydroxamic form; F1), PhC(=O)N(Me)OH, to achieve the imino species [PtCl4[NH=C(R)ON(Me)C(=O)Ph]2 (1-3) and [PtCl4[NH=C(Me)ON(Me)C(=O)Ph](Me2SO)] (7), respectively. Treatment of trans-[PtCl4(RCN)2] (R=Me, Et) and cis/trans-[PtCl4(MeCN)(Me2SO)] with the O-alkylated form of a hydroxamic acid (hydroximic form), i.e. methyl 2,4,6-trimethylbenzohydroximate, 2,4,6-(Me3C6H2)C(OMe)=NOH (F2A), allows the isolation of [PtCl4[NH=C(R)ON=C(OMe)(2,4,6-Me3C6H2)]2] (5, 6) and [PtCl4[NH=C(Me)ON=C(OMe)(2,4,6-Me3C6H2)](Me2SO)] (8), correspondingly. In accord with the latter reaction, the coupling of nitriles in trans-[PtCl4(EtCN)2] with methyl benzohydroximate, PhC(OMe)=NOH (F2B), gives [PtCl4[NH=C(Et)ON=C(OMe)Ph]2] (4). The addition proceeds faster with the hydroximic F2, rather than with the hydroxamic form F1. The complexes 1-8 were characterized by C, H, N elemental analyses, FAB+ mass-spectrometry, IR, 1H and 13C[1H] NMR spectroscopies. The X-ray structure determinations have been performed for both hydroxamic and hydroximic complexes, i.e. 2 and 6, indicating that the imino ligands are mutually trans and they are in the E-configuration.     

Synthesis and reactivity of Ir(I) and Ir(III) complexes with MeNH2, Me2C=NR (R = H, Me), C,N-C6H4{C(Me)=N(Me)}-2, and N,N'-RN=C(Me)CH2C(Me2)NHR (R = H, Me) ligands

Complexes [Ir(Cp*)Cl(n)(NH2Me)(3-n)]X(m) (n = 2, m = 0 (1), n = 1, m = 1, X = Cl (2a), n = 0, m = 2, X = OTf (3)) are obtained by reacting [Ir(Cp*)Cl(mu-Cl)]2 with MeNH2 (1:2 or 1:8) or with [Ag(NH2Me)2]OTf (1:4), respectively. Complex 2b (n = 1, m = 1, X = ClO 4) is obtained from 2a and NaClO4 x H2O. The reaction of 3 with MeC(O)Ph at 80 degrees C gives [Ir(Cp*){C,N-C6H4{C(Me)=N(Me)}-2}(NH2Me)]OTf (4), which in turn reacts with RNC to give [Ir(Cp*){C,N-C6H4{C(Me)=N(Me)}-2}(CNR)]OTf (R = (t)Bu (5), Xy (6)). [Ir(mu-Cl)(COD)]2 reacts with [Ag{N(R)=CMe2}2]X (1:2) to give [Ir{N(R)=CMe2}2(COD)]X (R = H, X = ClO4 (7); R = Me, X = OTf (8)). Complexes [Ir(CO)2(NH=CMe2)2]ClO4 (9) and [IrCl{N(R)=CMe2}(COD)] (R = H (10), Me (11)) are obtained from the appropriate [Ir{N(R)=CMe2}2(COD)]X and CO or Me4NCl, respectively. [Ir(Cp*)Cl(mu-Cl)]2 reacts with [Au(NH=CMe2)(PPh3)]ClO4 (1:2) to give [Ir(Cp*)(mu-Cl)(NH=CMe2)]2(ClO4)2 (12) which in turn reacts with PPh 3 or Me4NCl (1:2) to give [Ir(Cp*)Cl(NH=CMe2)(PPh3)]ClO4 (13) or [Ir(Cp*)Cl2(NH=CMe2)] (14), respectively. Complex 14 hydrolyzes in a CH2Cl2/Et2O solution to give [Ir(Cp*)Cl2(NH3)] (15). The reaction of [Ir(Cp*)Cl(mu-Cl)]2 with [Ag(NH=CMe2)2]ClO4 (1:4) gives [Ir(Cp*)(NH=CMe2)3](ClO4)2 (16a), which reacts with PPNCl (PPN = Ph3=P=N=PPh3) under different reaction conditions to give [Ir(Cp*)(NH=CMe2)3]XY (X = Cl, Y = ClO4 (16b); X = Y = Cl (16c)). Equimolar amounts of 14 and 16a react to give [Ir(Cp*)Cl(NH=CMe2)2]ClO4 (17), which in turn reacts with PPNCl to give [Ir(Cp*)Cl(H-imam)]Cl (R-imam = N,N'-N(R)=C(Me)CH2C(Me)2NHR (18a)]. Complexes [Ir(Cp*)Cl(R-imam)]ClO4 (R = H (18b), Me (19)) are obtained from 18a and AgClO4 or by refluxing 2b in acetone for 7 h, respectively. They react with AgClO4 and the appropriate neutral ligand or with [Ag(NH=CMe2)2]ClO4 to give [Ir(Cp*)(R-imam)L](ClO4)2 (R = H, L = (t)BuNC (20), XyNC (21); R = Me, L = MeCN (22)) or [Ir(Cp*)(H-imam)(NH=CMe2)](ClO4)2 (23a), respectively. The later reacts with PPNCl to give [Ir(Cp*)(H-imam)(NH=CMe2)]Cl(ClO4) (23b). The reaction of 22 with XyNC gives [Ir(Cp*)(Me-imam)(CNXy)](ClO4)2 (24). The structures of complexes 15, 16c and 18b have been solved by X-ray diffraction methods.     

Preparation and properties of cyclopentadienyl- and pentamethylcyclopentadienyl-titanium(IV) complexes with the C8H4S8 ligand, electrical conductivities of their oxidized species, and X-ray crystal structure of Ti(C5Me5)2(C8H4S8)

Ti(C5H5)2(C8H4S8) (1), Ti(C5Me5)2(C8H4S8) (2), [NMe4][Ti(C5H5)(C8H4S8)2] (3), and [NMe4][Ti(C5Me5)(C8H4S8)2] (4) [C8H4S8(2-) = 2-(4,5-ethylenedithio)-1,3-dithiole-2-ylidene)-1,3-dithiole-4,5- dithiolate(2-)] were prepared by reaction of Ti(C5H5)2Cl2, Ti(C5Me5)2Cl2, Ti(C5H5)Cl3, or Ti(C5Me5)Cl3 with Li2C8H4S8 or [NMe4]2[C8H4S8] in THF. They were oxidized by iodine, the ferrocenium cation, or TCNQ (7,7,8,8-tetracyano-p-quinodimethane) in CH2Cl2 or in acetone to afford one-electron-oxidized and over-one-electron-oxidized species, [Ti(C5H5)2(C8H4S8)].I3, [Ti(C5H5)2(C8H4S8)][PF6], [Ti(C5Me5)2(C8H4S8)].I3, [Ti(C5Me5)2(C8H4S8)][PF6], [Ti(C5H5)(C8H4S8)2].I0.9, [Ti(C5H5)(C8H4S8)2][TCNQ]0.3, [Ti(C5Me5)(C8H4S8)2].I2.4, and [Ti(C5Me5)(C8H4S8)2][TCNQ]0.3, with the C8H4S8 ligand-centered oxidation. They exhibited electrical conductivities of 1.6 x 10(-1) to 7.6 x 10(-4) S cm-1 measured for compacted pellets at room temperature. The crystal structure of 2 was clarified to consist of isolated dimerized units of the molecules through some sulfur-sulfur nonbonded contacts: monoclinic, P2(1)/c, a = 9.534(2) A, b = 18.227(2) A, c = 17.775(2) A, beta = 94.39(1) degrees, Z = 4.     

Electroswitchable photoluminescence activity: synthesis, spectroscopy, electrochemistry, photophysics, and X-ray crystal and electronic structures of [Re(bpy)(CO)3(C[triple bond]C[bond]C6H4[bond]C[triple bond]C)Fe(C5Me5)(dppe)][PF6](n) (n = 0, 1)

A novel heterobimetallic alkynyl-bridged complex, [Re(bpy)(CO)(3)(C[triple bond]C[bond]C(6)H(4)[bond]C[triple bond]C)Fe(C(5)Me(5))(dppe)], 1, and its oxidized species, [Re(bpy)(CO)(3)(C[triple bond]C[bond]C(6)H(4)[bond]C[triple bond]C)Fe(C(5)Me(5))(dppe)][PF(6)], 2, have been synthesized and their X-ray crystal structures determined. A related vinylidene complex, [Re(bpy)(CO)(3)(C[triple bond]C[bond]C(6)H(4)[bond](H)C[double bond]C)Fe(C(5)Me(5))(dppe)][PF(6)], 3, has also been synthesized and characterized. The cyclic voltammogram of 1 shows a quasireversible reduction couple at -1.49 V (vs SCE), a fully reversible oxidation at -0.19 V, and a quasireversible oxidation at +0.88 V. In accord with the electrochemical results, density-functional theory calculations on the hydrogen-substituted model complex Re(bpy)(CO)(3)(C[triple bond]C[bond]C(6)H(4)[bond]C[triple bond]C)Fe(C(5)H(5))(dHpe) (Cp = C(5)H(5), dHpe = H(2)P[bond](CH(2))(2)[bond]PH(2)) (1-H) show that the LUMO is mainly bipyridine ligand pi* in character while the HOMO is largely iron(II) d orbital in character. The electronic absorption spectrum of 1 shows low-energy absorption at 390 nm with a 420 nm shoulder in CH(2)Cl(2), while that of 2 exhibits less intense low-energy bands at 432 and 474 nm and additional low-energy bands in the NIR at ca. 830, 1389, and 1773 nm. Unlike the related luminescent rhenium(I)-alkynyl complex [Re(bpy)(CO)(3)(C[triple bond]C[bond]C(6)H(4)[bond]C[triple bond]C[bond]H)], 4, complex 1 is found to be nonemissive, and such a phenomenon is attributed to an intramolecular quenching of the emissive d pi(Re) --> pi*(bpy) (3)MLCT state by the low-lying MLCT and LF excited states of the iron moiety. Interestingly, switching on of the luminescence property derived from the d pi(Re) --> pi*(bpy) (3)MLCT state can be demonstrated in the oxidized species 2 and the related vinylidene analogue 3 due to the absence of the quenching pathway.     

Synthetic utility of [(C5Me5)2Ln][(mu-Ph)2BPh] in accessing [(C5Me5)2LnR]x unsolvated alkyl lanthanide metallocenes, complexes with high C-H activation reactivity

The loosely ligated [BPh4]1- ion in [(C5Me5)2Ln][(mu-Ph)2BPh2] can be readily displaced by alkyllithium or potassium reagents to provide access to unsolvated alkyl lanthanide metallocenes, [(C5Me5)2LnR]x, which display high C-H activation reactivity. [(C5Me5)2SmMe]3, [(C5Me5)2LuMe]2, [(C5Me5)2LaMe]x, (C5Me5)2Sm(CH2Ph), [(C5Me5)2Sm(CH2SiMe3)]x, and [(C5Me5)2SmPh]2 were prepared in this way. [(C5Me5)2SmMe]3 metalates toluene, benzene, SiMe4, and (C5Me5)1- ligands to make (C5Me5)2Sm(CH2Ph), [(C5Me5)2SmPh]2, [(C5Me5)2Sm(CH2SiMe3)]x, and (C5Me5)6Sm4[C5Me3(CH2)2]2, respectively. These C-H activation reactions can be done using an in situ synthesis of [(C5Me5)2LnMe]x such that the [(C5Me5)2Ln][(mu-Ph)2BPh2]/LiMe/RH combination provides a facile route to a variety of unsolvated [(C5Me5)2LnR]x products.     

Mechanistic study on the coupling reaction of aryl bromides with arylboronic acids catalyzed by (iminophosphine)palladium(0) complexes. Detection of a palladium(II) intermediate with a coordinated boron anion

The complexes [Pd(eta2-dmfu)(P-N)] [P-N = 2-(PPh2)C6H4-1-CH=NR, R = C(6)H(4)OMe-4; CHMe2; C6H3Me2-2,6; C6H3(CHMe2)-2,6] react with an excess of BrC6H4R1-4 (R1= CF3; Me) yielding the oxidative addition products [PdBr(C6H4R1-4)(P-N)] at different rates depending on R [C6H4OMe-4 > C6H3(CHMe2)-2,6 > CHMe2 approximately C6H3Me2-2,6] and R1 (CF3> Me). In the presence of K2CO3 and activated olefins (ol = dmfu, fn), the latter compounds react with an excess of 4-R2C6H4B(OH)2 (R2= H, Me, OMe, Cl) to give [Pd(eta2-ol)(P-N)] and the corresponding biaryl through transmetallation and fast reductive elimination. The transmetallation proceeds via a palladium(II) intermediate with an O-bonded boron anion, the formation of which is markedly retarded by increasing the bulkiness of R. The intermediate was isolated for R = CHMe2, R1 = CF3 and R2= H. The boron anion is formulated as a diphenylborinate anion associated with phenylboronic acid and/or as a phenylboronate anion associated with diphenylborinic acid. In general, the oxidative addition proceeds at a lower rate than transmetallation and represents the rate-determining-step in the coupling reaction of aryl bromides with arylboronic acids catalyzed by [Pd(eta2-dmfu)(P-N)].     

Synthesis and structures of selected benzamidinates of Li, Na, Al, Zr and Sn(II) using the C1-symmetric ligands [N(SiMe3)C(C6H4Me-4 or Ph)NPh]-

Several compounds based on the C(1)-symmetric ligands [N(R)C(Ar)NPh]- [abbreviated as B1 (Ar = C(6)H(4)Me-4) or B2 (Ar = Ph), R = SiMe(3)] are reported. They are the crystalline metal benzamidinates [Li(mu:kappa2-B1)(OEt2)](2) (1), [Al(kappa2-B1)2Me] (2), [Al(kappa2-B1)2X] [X = Cl/Me, 1 : 1 (3)], [Sn(kappa2-B1)2] (4), Zr(kappa2-B1)2Cl2 (5), [Zr(kappa2-B1)3Cl] (6), [Na(mu:kappa2-B1)(tmeda)]2 (7), K[B1] (8), Li(B2)(OEt2) (9) and Zr(kappa2-B1)3Cl (10) and the known benzamidine Z-H2NC(C6H4Me-4) = NPh (11). They were prepared by (i) insertion of the nitrile 4-MeC6H4CN (1, 7, 8, 11) or PhCN (9) into the appropriate M-N(R')Ph [R' = R and M = Li (1, 9), Na (7), K (8)] bond and subsequent hydrolysis for 11 [R' = H and M = Li], or (ii) a ligand transfer reaction using the lithium amidinate 1 and Al(Me)2Cl (2, 3), SnCl2 (4) or ZrCl4 (5, 6), or Li(B2) and ZrCl4 (10). The X-ray structures of 1, 2, 3, 4, 6b (i.e..3PhMe) 7, and 11 are presented. Exploratory polymerisation experiments are described, using 2, 5 or 6 as a procatalyst with methylaluminoxane (MAO) (Al : Zr ca. 500 : 1) as promoter. Thus toluene solutions were exposed to C2H4 under ambient conditions; while 2 was unresponsive, 5 and 6 showed modest activity in the formation of polyethylene.     

P=C bonds as building blocks for three- and four-membered heterocyclic cations: synthesis, structures and mechanistic studies

The activation of the P=C bond of phosphaalkenes with electrophiles is investigated as a means to prepare and characterize unusual organophosphorus compounds. Treatment of RP=CHtBu (1a: R=tBu; 1b: R=1-adamantyl) with HOTf (0.5 equiv) affords diphosphiranium salts [RP-CHtBu-PR (CH(2)tBu)]OTf ([2a]OTf and [2b]OTf), each containing a three-membered P(2)C ring. In contrast, the addition of MeOTf (0.5 equiv) to either 1a or 1b affords diphosphetanium salts [RP-CHtBu-P(Me)R-CHtBu]OTf ([3a]OTf and [3b]OTf) containing four-membered P(2)C(2) heterocycles. The phosphenium triflate [tBuP(CH(2)tBu)]OTf ([5a]OTf) and methylenephosphonium triflate [tBu(Me)P=CHtBu]OTf ([7a]OTf) are identified spectroscopically as intermediates in the formation of [2a](+) and [3a](+), respectively. The phosphenium triflate intermediate can be trapped with 2-butyne to afford phosphirenium salt [MeC=CMe-tBuPCH(2)tBu]OTf ([6a]OTf). Treatment of diphosphetanium [3a]OTf with an excess MeOTf affords [Me(2)P-CHtBu-PMetBu-CHtBu](OTf)(2) ([4a](OTf)(2)), a compound containing a diphosphetanium dication. The molecular structures are reported for [2a]OTf, [2b][H(OTf)(2)], [3a]I, [3b]I, [4a](OTf)(2), and [6a]OTf.     

Facile access to redox-active C2-bridged complexes with half-sandwich manganese end groups

The dinuclear mixed-valent complex [(MeC5H4)(dmpe)MnC(2)Mn(dmpe)(C5H4Me)](+)[(eta2-MeC5H4)3Mn](-)[1](+)[2]- (dmpe=1,2-bis(dimethylphosphanyl)ethane) was prepared by the reaction of [Mn(MeC5H4)2] with dmpe and Me(3)SnC[triple chemical bond]CSnMe3. The reactions of [1](+)[2]- with K[PF6] and Na[BPh4] yielded the corresponding anion metathesis products [(MeC5H4)(dmpe)MnC2Mn(dmpe)(C5H4Me)][PF6] ([1][PF6]) and [(MeC5H4)(dmpe)MnC2Mn(dmpe)(C5H4Me)][BPh4] ([1][BPh4]). These mixed-valent species can be reduced to the neutral form by reaction with Na/Hg. The obtained complex [(MeC5H4)(dmpe)MnC2Mn(dmpe)(C5H4Me)] (1) displays a triplet/singlet spin equilibrium in solution and in the solid state, which was additionally studied by DFT calculations. The diamagnetic dicationic species [(MeC5H4)(dmpe)MnC2Mn(dmpe)(C5H4Me)][PF6]2 ([1][PF6]2) was obtained by oxidizing the mixed-valent complex [1][PF6] with one equivalent of [Fe(C5H5)2][PF6]. Both redox processes are fully reversible. The dinuclear compounds were characterized by NMR, IR, UV-visible, and Raman spectroscopy, cyclic voltammetry, and magnetic susceptibility measurements. X-ray diffraction studies were performed on [1][2], [1][PF6], [1][BPh4], and [1][PF6]2.     

Five-coordinate nickel(II) complexes with carboxylate anions and derivatives of 1,5,9-triazacyclododec-1-ene: structural and 1H NMR spectroscopic studies

The hydroxo complexes [Ni2(mcN3)2(mu-OH)2]2(PF6)2[mcN3 = 2,4,4-trimethyl-1,5,9-triazacyclododec-1-ene (Me3-mcN3) or 2,4,4,9-tetramethyl-1,5,9-triazacyclododec-1-ene (Me4-mcN3)] react with the corresponding carboxylic acid [HA = benzoic (Hbz), salicylic (Hsal) or acetylsalicylic (Hacsal) acid] to give five-coordinate nickel(II) complexes of the type [Ni(mcN3)(A)](PF6). The complexes have been studied by spectroscopic methods (IR, UV-Vis and 1H NMR). In acetone solution they exhibit isotropically shifted 1H NMR resonances. The full assignment of these resonances has been made using one- and two-dimensional 1H NMR techniques. The single-crystal structures of [Ni(Me4-mcN3)(bz)](PF6), [Ni(Me4-mcN3)(sal)](PF6) and[Ni(Me4-mcN3)(acsal)](PF6) have been established by X-ray diffraction.     

Synthesis, crystal structure and reactivity of uranium(IV) complexes with p-tert-butylcalix[4]arene ligands

Reactions of UCl4 with 25,27-dimethoxy-5,11,17,23-tetra-tert-butylcalix[4]arene (H2Me2calix) in THF or pyridine at 80 degrees C gave [UCl2(Me2calix)L2] [L = THF (1) or pyridine (2)]. Similar treatment of U(acac)(4) (acac = MeCOCHCOMe) with H2Me2calix in THF or pyridine afforded [U(acac)2(Me2calix)] (3). The bis-calixarene compound [U(Me2calix)(H2calix)] (4) was obtained by reaction of U(OTf)4 or U(OTf)3 with H2Me2calix in pyridine at 110 degrees C. Treatment of UCl4 with H2Me2calix in pyridine at 110 degrees C gave [Mepy][UCl2(Hcalix)(py)2] (5) resulting from demethylation and acid cleavage of the methoxy groups of the calixarene ligand of 2. Adventitious traces of air were responsible for the formation of [Hpy][Mepy]4[{UCl(calix)}3(mu3-O)][UCl6] (6) during the reaction of UCl4 and H2Me2calix, and of [{U(Me2calix)(mu3-O)LiCl(THF)}2] (7) during the reaction of 2 with tBuLi. The X-ray crystal structures of 1.2THF, 2.2py, 3.0.25L (L = THF and py), 4.2py, 5, 6.3py and 7.THF have been determined.     

Planar trimethylenemethane dianion chemistry of lanthanide metallocenes: synthesis, structure, density functional theory analysis, and reactivity of [(C5Me5)2Ln]2[mu-eta3:eta3-C(CH2)(3] Complexes

The unusual formation of planar trimethylenemethane (TMM) dianion complexes of lanthanide metallocenes, [(C5Me5)2Ln]2[mu-eta3:eta3-C(CH2)3] (Ln = Sm, 1; La, 2; Pr, 3; Nd, 4; Y, 5) has been examined by synthesizing examples with metals from La to Y to examine the effects of radial size on structure and to provide closed shell examples for direct comparison with density functional theory (DFT) calculations. Synthetic routes to 1-4 have been expanded from the [(C5Me5)2Ln][(mu-Ph)2BPh2]/neopentyl lithium reaction involving beta-methyl elimination to a [(C5Me5)2Ln][(mu-Ph)2BPh2]/isobutyl lithium route. The synthetic pathways are sensitive to metal radius. To obtain 5, the methylallyl complex, (C5Me5)2Y[CH2C(Me)CH2], 6, was synthesized and treated with [(C5Me5)2YH]x. In the Lu case, the neopentyl complex [(C5Me5)2LuCH2C(CH3)3]x, 7, was isolated instead of the TMM product. X-ray crystallography showed that the metrical parameters of the planar TMM dianions in each complex are similar. The structural data have been compared with DFT calculations on the closed-shell lanthanum and lutetium complexes that suggest only limited covalent interactions with the lanthanide ion. Benzophenone (2 equiv) reacts with 1 to expand the original four-carbon TMM skeleton to a dianionic bis(alkoxide) ligand containing a symmetrically substituted C=CH2 moiety in [(C5Me5)2Sm]2[mu-(OCPh2CH2)2C=CH2], 8. In this reaction, the TMM complex reacts as a bifunctional bisallylic reagent that generates an organic framework containing a central vinyl group.     

Synthesis, solid-state structure, and bonding analysis of the beryllocenes [Be(C5Me4H)2], [Be(C5Me5)2], and [Be(C5Me5)(C5Me4H)

The beryllocenes [Be(C(5)Me(4)H)(2)] (1), [Be(C(5)Me(5))(2)] (2), and [Be(C(5)Me(5))(C(5)Me(4)H)] (3) have been prepared from BeCl(2) and the appropriate KCp' reagent in toluene/diethyl ether solvent mixtures. The synthesis of 1 is facile (20 degrees C, overnight), but generation of decamethylberyllocene 2 demands high temperatures (ca. 115 degrees C) and extended reaction times (3-4 days). The mixed-ring beryllocene 3 is obtained when the known [(eta(5)-C(5)Me(5))BeCl] is allowed to react with K[C(5)Me(4)H], once more under somewhat forcing conditions (115 degrees C, 36 h). The structures of the three metallocenes have been determined by low-temperature X-ray studies. Both 1 and 3 present eta5/eta1 geometries of the slip-sandwich type, whereas 2 exhibits an almost regular, ferrocene-like, sandwich structure. In the mixed-ring compound 3, C(5)Me(5) is centrally bound to beryllium and the eta(1)-C(5)Me(4)H ring bonds to the metal through the unique CH carbon atom. This is also the binding mode of the eta(1)-ring of 1. To analyze the nature of the bonding in these molecules, theoretical calculations at different levels of theory have been performed on compounds 2 and 3, and a comparison with the bonding in [Be(C(5)H(5))(2)] has been made. As for the latter molecule, energy differences between the eta5/eta5 and the eta5/eta1 structures of 2 are very small, being of the order of a few kcal mol(-1). Constrained space orbital variations (CSOV) calculations show that the covalent character in the bonding is larger for [Be(C(5)Me(5))(2)] than for [Be(C(5)H(5))(2)] due to larger charge delocalization and to increased polarizability of the C(5)Me(5) fragment.     

cyclo-CH2[Sn(CI2)CH2Si(Me2)]2O]: synthesis and complexation behaviour of a novel, cyclic, bidentate Lewis acid and its conversion into a tin-containing fluorosilane with intermolecular Si-F...Sn bridges

Acid-catalysed hydrolysis of [CH2[(Sn(Ph2)CH2Si(OiPr)Me2]2] followed by subsequent reaction with mercuric chloride in acetone afforded the novel silicon- and tin-containing eight-membered ring [cyclo-CH2[Sn(Cl2)CH2Si(Me2)]2O] in good yield, the crystal structure of which is reported. 119Sn NMR and X-ray studies indicate that [cyclo-CH2[Sn(Cl2)CH2Si(Me2)]2O] acts as a bidentate Lewis acid towards chloride ions exclusively forming the 1:1 complex [(Ph3P)2N]+[cyclo-CH2[Sn(Cl2)CH2Si(Me2)]2OCl]- upon addition of [(Ph3P)2N]+Cl- . Also reported are the synthesis and structure of [K(dibenzo[18]crown-6)]+[cyclo-CH2(Sn(Cl2)CH2Si(Me2)]2OF]-, the first completely characterised organostannate with a C2SnCl2F- substituent pattern. No ring-opening polymerisation could be achieved for [cyclo-CH2[Sn(Cl2)CH2Si(Me2)]2O] or for its perphenylated derivative [cyclo-CH2[Sn(Ph2)CH2Si(Me2)]2O]. The reaction of [cyclo-CH2[Sn(Cl2)CH2Si(Me2)]2O] with Me3O+BF4- gave the tin-containing fluorosilane [CH2[Sn(Cl2)CH2Si(F)Me2]2], in which the Si-F bond is activated by intermolecular Si-F...Sn interactions in the solid state.     

Mononuclear (Pd, Pt), heterodinuclear (PdAg, PtAg), and tetranuclear (Pd2Ag2, Pt2Ag2) 1,1-ethylenedithiolato complexes

lp;&-5q;1 The reactions of [Tl2[S2C=C[C(O)Me]2]]n with [MCl2L2] (1:1) or with [MCl2(NCPh)2] and PPh3 (1:1:2) give complexes [M[eta2-S2C=C[C(O)Me]2]L2] [M = Pt, L2 = 1,5-cyclooctadiene (cod) (1); L2 = bpy, M = Pd (2a), Pt (2b), L = PPh3, M = Pd (3a), Pt (3b)] whereas with MCl2 and QCl (2:1:2) anionic derivatives Q2[M[eta2-S2C=C[C(O)Me]2]2] [M = Pd, Q = NMe4 (4a), Ph3P=N=PPh3 (PPN) (4a'), M = Pt, Q = NMe4 (4b)] are produced. Complexes 1 and 3 react with AgClO4 (1:1) to give tetranuclear complexes [[ML2]2Ag2[mu2,eta2-(S,S')-[S2C=C[C(O)Me]2]2]](ClO4)2 [L = PPh3, M = Pd (5a), Pt (5b), L2 = cod, M = Pt (5b')], while the reactions of 3 with AgClO4 and PPh3 (1:1:2) give dinuclear [[M(PPh3)2][Ag(PPh3)2][mu2,eta2-(S,S')-S2C=C[C(O)Me]2]]]ClO4 [M = Pd (6a), Pt (6b)]. The crystal structures of 3a, 3b, 4a, and two crystal forms of 5b have been determined. The two crystal forms of 5b display two [Pt(PPh3)2][mu2,eta2-(S,S')-[S2C=C[C(O)Me]2]2] moieties bridging two Ag(I) centers.     

The first noncoordinated phosphonium diylide, [Me2P(C13H8)2]-, and its ylidic and cationic counterparts: synthesis, structural characterization, and interaction with the heavy group 2 metals

Treatment of potassium or lithium fluorenide with MePCl2 generates the organophosphine MeP(C13H9)2, which on reaction with methyl iodide produces the phosphonium species [Me2P(C13H9)2]I in 74% yield. In the solid state, H...I contacts of < 3.3 A help generate a layered structure in which the fluorenyl rings are nearly parallel. On subsequent reaction of [Me2P(C13H9)2]I with either KH or K[N(SiMe3)2], the corresponding neutral phosphoylide, Me2P(C13H9)(C13H8), forms in 67% yield and was structurally characterized. The phosphonium iodide [Me2P(C13H9)2]I was allowed to react with Ae[N(SiMe3)2]2 (Ae = Ca, Ba), and the product from the reaction with the calcium complex was structurally identified as the salt [CaI(thf)5][Me2P(C13H8)2]. The anion, which is outside the coordination sphere of the calcium, represents the first structurally authenticated example of a free phosphonium diylide. The P-C(ylidic) bond length of 1.748(4) A reflects some partial multiple bond character. 1H and 31P NMR spectra suggest that the barium analogue is similar. Density functional theory calculations were performed on representative phosphonium diylides as an aid to interpreting the bonding in this class of compounds. Despite the strong electrostatic attraction that usually drives metal-ligand binding in highly ionic systems, calcium and barium prefer to coordinate to a single iodide ion and several neutral oxygen donors rather than to the charged diylide.