The Application of Perdeuterated Polycyclic Aromatic Hydrocarbons (PAH) as Internal Standards for the Liquid Chromatographic Determination of PAH in a Petroleum Crude Oil and Other Complex Mixtures

Abstract

A sequential liquid chromatographic (LC) procedure for the determination of polycyclic aromatic hydrocarbons (PAH) in a petroleum crude oil and other complex mixtures is described. The procedure includes normal-phase LC on an aminosilane column to isolate fractions containing isomeric PAH and reversed-phase LC on a polymeric C₁₈ column to separate the individual PAH isomers. Appropriate perdeuterated PAH are added to the sample so that each isomeric fraction will contain one internal standard. The perdeuterated PAH are excellent internal standards for this sequential LC procedure. Perdeuterated PAH have normal-phase and reversed-phase LC retention characteristics similar to those of the parent PAH. In the normal-phase LC separation, the perdeuterated PAH elute in the same fraction as the parent PAH. In the reversed-phase LC separation, the perdeuterated PAH elute first and are generally resolved from the parent PAH. The optimized spectrofluorometric detection of each PAH analyte is accomplished by programming appropriate sets of excitation and emission wavelengths to correspond with the elation time of each analyte on the polymeric C₁₈ column. The analytical results obtained from this procedure for the analysis of a shale oil sample [Standard Reference Material (SRM) 1580] and a petroleum crude oil (SRM 1582) are compared to values obtained by gas chromatography - mass spectrometry.     

Simultaneous spray coating of interacting species: general rules governing the poly(styrene sulfonate)/poly(allylamine) system

Simultaneous spraying of two solutions of interacting species onto a substrate held vertically leads to the formation of nanometer-sized coatings. Here we investigate the simultaneous spraying of poly(styrene sulfonate) (PSS) and poly(allylamine hydrochloride) (PAH) solutions leading to the formation of a film composed of PSS/PAH complexes. The thickness of this film increases linearly with the cumulative spraying time. For a given spraying rate of PAH (respectively PSS), the growth rate of the film depends strongly upon the PSS/PAH ratio and passes through a maximum for a PSS/PAH ratio lying between 0.55 and 0.8. For a PSS/PAH ratio that is maintained constant, the growth speed of the film increases linearly with the spraying rate of polyelectrolyte of both solutions. Using X-ray photoelectron spectroscopy, we find that the film composition is almost independent of the PSS/PAH (spayed) ratio, with composition very close to 1:1 in PSS:PAH film. The 1:1 PSS:PAH composition is explained by the fact that the simultaneous spraying experiments are carried out with salt-free solutions; thus, electroneutrality in the film requires exact matching of the charges carried by the polyanions and the polycations. Zeta potential measurements reveal that, depending on whether the PSS/PAH spraying rate ratio lies below or above the optimal spraying rate ratio, the film acquires a positive or a negative excess charge. We also find that the overall film morphology, investigated by AFM, is independent of the spraying rate ratio and appears to be composed of nanometer-sized grains which are typically in the 100 nm range.     

焦炉烟气中全量多环芳烃分析方法

报道了利用处在制串联采样装置。优选出了比较理想的前处理方法，并用此方法对焦炉烟气中的全量多环芳烃进行了研究。滤膜颗粒物中的多环芳烃有６途中 ，聚氨酯泡沫吸附剂中有４９种。     

Probing the conformation of polyelectrolytes in mesoporous silica spheres

We report a fluorescence-based approach to probing the conformation of a macromolecule, poly(allylamine hydrochloride) (PAH), in bimodal mesoporous silica (BMS) particles. The method involves monitoring the fluorescent properties of the probe, 1,3,6,8-pyrenetetrasulfonic acid tetrasodium salt (4-PSA), upon electrostatic binding to PAH molecules adsorbed in the nanopores of the BMS particles. PAH infiltration into the BMS particles, quantified by thermogravimetric analysis and visualized by confocal laser scanning microscopy, was examined as a function of PAH adsorption time, PAH molecular weight, and the sodium chloride (NaCl) concentration and pH of the PAH adsorption solution. The conformation of PAH molecules in the nanopores was investigated by incubating the PAH-loaded BMS particles in 4-PSA and using the ratio of the excimer to monomer emission intensity to discern differences in the PAH conformation in the nanopores. Control experiments involving nonporous silica (NS) particles were also conducted to determine the extent to which the nanopores within the BMS particles influence the degree of PAH adsorption and the conformation of the adsorbed PAH molecules. The data indicate that PAH molecules adsorbed in the nanopores adopt a more coiled conformation than PAH molecules adsorbed on NS particles over a wide range of conditions. Further, the conformation of PAH molecules in the nanopores can be tuned by adjusting the NaCl concentration and/or pH of the PAH adsorption solution. 4-PSA titration experiments revealed that at saturation binding there are ca. 3.8 PAH monomer units per 4-PSA molecule. This study provides insights into macromolecule infiltration and conformation in nanopores, which are important for the application of mesoporous materials in the fields of adsorption/immobilization, catalysis, delivery, sensing, separations, and synthesis.     

The solid-matrix room-temperature luminescence detection and characterization of polyaromatic hydrocarbons without a heavy atom

A selective and sensitive method to detect polyaromatic hydrocarbons (PAH) using a new solid-matrix room-temperature luminescence technique is presented. The solid-matrix room-temperature fluorescence (SMRTF) and phosphorescence (SMRTP) of PAH can be readily obtained by adsorbing a PAH on Whatman 1PS filter paper. Strong phosphorescence can be detected without adding a heavy atom. Detection limits, ranging from 0.12 to 18 ng, were obtained for several PAH.     

Epigenetic modulation as a therapeutic approach for pulmonary arterial hypertension

Pulmonary arterial hypertension (PAH) is a rare but progressive and currently incurable disease, which is characterized by vascular remodeling in association with muscularization of the arterioles, medial thickening and plexiform lesion formation. Despite our advanced understanding of the pathogenesis of PAH and the recent therapeutic advances, PAH still remains a fatal disease. In addition, the susceptibility to PAH has not yet been adequately explained. Much evidence points to the involvement of epigenetic changes in the pathogenesis of a number of human diseases including cancer, peripheral hypertension and asthma. The knowledge gained from the epigenetic study of various human diseases can also be applied to PAH. Thus, the pursuit of novel therapeutic targets via understanding the epigenetic alterations involved in the pathogenesis of PAH, such as DNA methylation, histone modification and microRNA, might be an attractive therapeutic avenue for the development of a novel and more effective treatment. This review provides a general overview of the current advances in epigenetics associated with PAH, and discusses the potential for improved treatment through understanding the role of epigenetics in the development of PAH.     

Ultrasound-assisted extraction and on-line LC–GC–MS for determination of polycyclic aromatic hydrocarbons (PAH) in urban dust and diesel particulate matter

A method has been developed for determination of polycyclic aromatic hydrocarbons (PAH) in particulate matter from ambient air and diesel exhaust emissions. It is reproducible and accurate and, compared with similar methods for analysis of individual PAH components in complex matrices, it is relatively fast and simple. Single PAH components can be determined in samples of particulate matter from ambient air and diesel exhaust emissions with LOD of approximately 1 pg/sample. Further, sample throughput is high, because more than 20 samples can be extracted and prepared for analysis in one working (8-h) day. The particulate matter is subjected to ultrasound-assisted extraction, a technique that is shown to extract PAH from particulate material with efficiencies fully comparable with those of Soxhlet extraction. An aliphatic/PAH-enriched fraction is obtained by solid-phase extraction before isolation, separation, and identification/quantification of PAH by on-line liquid chromatography–gas chromatography–mass spectrometry. The method was validated by analysis of US National Institute of Standards and Technology (NIST) Standard Reference Materials (SRM) 1649a, Urban Dust, and 2975, Diesel Particulate Matter. Results from the method are in good agreement with the NIST-certified PAH concentrations and with NIST reference PAH concentrations.     

On-line liquid chromatography – gas chromatography for automated clean-up and analysis of polycyclic aromatic hydrocarbons

A fully automated system, comprising a liquid chromatograph (LC) coupled on-line to a gas chromatograph (GC) by means of a loop interface, has been constructed for clean-up and analysis of polycyclic aromatic hydrocarbons (PAH). An autosampler was utilized for sample injection into the LC. By the use of a back-flush technique in conjunction with an ordinary analytical aminopropylsilica column, PAH could be isolated by LC: a concurrent solvent evaporation injection technique was then used for on-line transfer of the PAH fraction to the GC, where the PAH analysis was completed. Compared with ordinary off-line LC clean-up followed by GC analysis, the sensitivity has been increased by a factor of 50–100, yielding a detection limit for individual PAH of a few nanograms per sample when using flame ionization detection. Further, irreproducible losses of low molecular weight PAH as a result of solvent evaporation steps in off-line clean-up procedures have been eliminated. Reproducibility of retention times and relative peak areas is high, facilitating automatic peak identification and calculation of concentrations, and the system can thus be used for automatic sample evaluation. The total time required for clean-up and analysis is only 1.5 hours, and the demand on personnel time for the analysis of PAH has been drastically reduced. The technique has been demonstrated with samples of urban air and of used automobile engine lubricating oil.     

Universal Calibration Method for the Determination of Polycyclic Aromatic Hydrocarbons by High Performance Liquid Chromatography with Broadband Diode-Array Detection

Abstract

The response of polycyclic aromatic hydrocarbons (PAH) at different UV wavelengths was measured using high performance liquid chromatography with spectrophotometric diode-array detection. By utilizing the total UV absorption bandwidth (200-400 nm), it was found that a narrow distribution of normalized response factors (area/g) could be obtained for 16 PAH in a reference mixture of frequently-occurring species, even though the PAH represented a wide variety of different chromophores.

Using the mean response factor for the 16 PAH, a universal calibration factor was obtained that formed the basis of a method for the determination of PAH for which calibration data cannot otherwise be obtained. It utilized normal phase high performance liquid chromatography (HPLC) with a cyanopropyl column and a hexane-dichloromethane mobile phase. The HPLC conditions were optimized for the separation of PAH according to their aromatic ring number. The method was developed for the characterization of complex mixtures of fossil fuels-derived PAH that cannot be analyzed by traditional methods. It is applicable to PAH having from 1 to 10 or more fused aromatic rings.     

Layer-by-layer Multilayer Films Self-assembled from a Rare-earth-containing Poly-oxometalate Na_9[Eu(W_5O_(18))_2] and Poly(allylamine hydrochloride) and Their Photoluminescent Properties

ＩｎｔｒｏｄｕｃｔｉｏｎＲｅｃｅｎｔｌｙ ,ｃｏｎｓｉｄｅｒａｂｌｅｉｎｔｅｒｅｓｔｈａｓｂｅｅｎｄｅｖｏｔｅｄｔｏａｓｓｅｍｂｌｉｎｇｎａｎｏｓｃａｌｅｂｕｉｌｄｉｎｇｂｌｏｃｋｓｗｉｔｈｖａｒｉｏｕｓｉｎｏｒ ｇａｎｉｃａｎｄ/ｏｒｏｒｇａｎｉｃｃｏｍｐｏｓｉｔｉｏｎｓｉｎｔｏｕｌｔｒａｔｈｉｎｍｕｌｔｉｌａｙ ｅｒｅｄｆｉｌｍｓｂｙｖｅｒｓａｔｉｌｅａｓｓｅｍｂｌｉｎｇｓｔｒａｔｅｇｉｅｓａｓｔｈｅｓｅｆｉｌｍｓｃａｎｏｆｆｅｒｇｒｅａｔｐｏｔｅｎｔｉａｌｆｏｒａｐｐｌｉｃａｔｉｏｎｓｓｕｃｈ…     

Penetration of mercury-adsorbed phospholipid monolayers by polynuclear aromatic hydrocarbons

The penetration of phospholipid monolayers (dioleoyl lecithin) adsorbed on mercury by polynuclear aromatic hydrocarbons (PAH) is described. The PAH studied were anthracene, phenanthrene, pyrene, benzo[a]anthracene, fluoranthene and perylene. The penetration is monitored by measuring the differential capacitance of the monolayer; the uptake of PAH causes a potential shift (up to ?0.25 V) in the cathodic capacitance peaks. This occurs without displacement of the lipid from the mercury. The differential capacitance is measured by out-of-phase (90°) a.c. voltammetry and rapid cyclic voltammetry. The PAH permeate the mercury-adsorbed lipid layers from dilute aqueous solution; the order of affinity is benzo[a]anthracene > fluoranthrene = pyrene > anthracene = phenanthrene. The rates of penetration vary for the different compounds and depend on their water solubility.     

Cell adhesion properties of patterned poly(acrylic acid)/poly(allylamine hydrochloride) multilayer films created by room-temperature imprinting technique

Patterned poly(acrylic acid) (PAA)/poly(allylamine hydrochloride) (PAH) multilayer films with line structures of different lateral size and vertical height were fabricated by a room-temperature imprinting technique, and their cell adhesion properties were investigated. The nonimprinted PAA/PAH multilayer films are cytophilic toward NIH/3T3 fibroblasts and HeLa cells whether PAA or PAH is the outer most layer. In contrast, the PAA/PAH multilayer films with a 6.5-microm-line/3.5-microm-space pattern structure are cytophobic toward NIH/3T3 fibroblasts and HeLa cells when the height of the lines is 1.29 microm. By either increasing the lateral size of the patters to 69-microm-line/43-mum-space or decreasing the height of the imprinted lines to approximately 107 nm, imprinted PAA/PAH multilayer films become cytophilic. This kind of transition of cell adhesion behavior derives from the change of the physical pattern size of the PAA/PAH multilayer films and is independent of the chemical composition of the films. The easy patterning of layer-by-layer assembled polymeric multilayer films with the room-temperature imprinting technique provides a facile way to tailor the cellular behavior of the layered polymeric films by simply changing the pattern dimensions.     

Polycyclic aromatic hydrocarbons in Ya-Er Lake (Hubei, China): sources and distribution

Sources and distribution of polycyclic aromatic hydrocarbons (PAH) in the Ya-Er Lake area (Hubei, China) sediment cores of 3 ponds in the shallow Ya-Er Lake were investigated for 16 PAH. Analytical procedure included extraction by ultrasonication, clean-up by gel-permeation and quantification by HPLC with fluorescence detection. The total PAH amount in sediment samples of the Ya-Er Lake ranged from 68 to 2242 μg/kg. Concentrations decreased from pond 1 to pond 3 and from upper to lower sediment layers. In addition a soil sample from Ya-Er Lake area showed a total PAH amount of 58 μg/kg. The PAH pattern in lower sediment layers were similar to that of the soil sample which indicates an atmospheric deposition into the sediments prior to 1970 only. The PAH profile of upper sediment samples, which differs completely from that of lower layers, may be explained by a gradually increasing input of mixed combustion and raw fuel sources since 1970. Therefore the origin of increased PAH contamination in Ya-Er Lake during the last 3 decades has been probably an industrial waste effluent in pond 1.     

On-line and in-situ detection of polycyclic aromatic hydrocarbons (PAH) on aerosols via thermodesorption and laser-induced fluorescence spectroscopy

A fiber optical sensor system for the determination of polycyclic aromatic hydrocarbons (PAH) on aerosols by laser-induced, time-resolved fluorescence is combined with a thermodesorption device. The sensor system is based on an aerosol flow cell, which is fibre-optically coupled to a pulsed nitrogen laser for excitation and the detection system. Time-resolved fluorescence emission spectra are detected by a monochromator equipped with a photomultiplier and a fast digital storage oscilloscope. The analytical figures of merit of the thermodenuder are reported for benzo[a]pyrene, benzo[b]fluoranthene, and benzo[ghi]-perylene on ultrafine soot and NaCl aerosols. By thermodesorption of the PAH, problems due to quenching of the PAH fluorescence by the bulk aerosol material or excimer formation on the aerosol surface were avoided. For the PAH under study, the sensitivity was improved considerably and detection limits between 110 and 850 ng m(-3) were attained, while a response time of 2-3 min was achieved with the thermodenuder. A calibration for PAH on ultrafine soot and NaCl aerosols was established independent of the aerosol substrate.     

Determination of selected polycyclic aromatic hydrocarbons and oxygenated polycyclic aromatic hydrocarbons in aerosol samples by high-performance liquid chromatography and liquid chromatography–tandem mass spectrometry

Fine and ultrafine particles are probably responsible for numerous health effects, but it is still unclear whether and to what extent the particle itself or organic compounds adsorbed or condensed on the particle are responsible for the effects observed. One important class of particle-bound substances are the polycyclic aromatic hydrocarbons (PAH) and their oxygenated derivatives. To improve the tools used for chemical characterization of particulate matter analytical methods for the determination of PAH and oxygenated PAH in aerosol samples of different origin have been developed and optimized. PAH on high-volume filters and on soot aerosols were analyzed by using accelerated solvent extraction for extraction and high-performance liquid chromatography with fluorescence detection for separation and quantification. Total PAH concentrations were in the range 0.3–9.3 ng m^–3. For analysis of selected oxygenated PAH on high-volume filters a liquid chromatography–tandem mass spectrometric method was developed and optimized. Preliminary investigations showed that oxygenated PAH at pg m^–3 concentrations can be determined.     

Differentiation of isomeric polyaromatic hydrocarbons by electrospray Ag(I) cationization mass spectrometry

Abundant Ag(I)-cationized complexes of 13 polyaromatic hydrocarbons (PAHs), [Ag+PAH](+) and [Ag+2(PAH)](+), were readily generated by electrospray ionization (ESI). In-source collision-induced dissociation (CID) of the [Ag+2(PAH)](+) complex yielded the monomer complex [Ag+PAH](+), which fragmented further to yield the radical molecular ion [PAH](+.). Based on significant differences in relative intensities of [Ag+2(PAH)](+), [Ag+PAH](+) and [PAH](+.), isomeric PAHs can be differentiated. The [PAH](+.)/[Ag+PAH](+) ion intensity ratio was found to increase with decreasing ionization potentials (IPs) of PAHs. The ratio was significantly different for the isomeric PAHs studied over a wide range of PAH concentrations (1.6-100 nmol/mL), and showed good measurement reproducibility; the coefficient of variation of inter-day measurements was in the range 3-12% for four representative PAHs (n = 5). Detection limits for phenanthrene, pyrene, chrysene and benzo[a]pyrene, in the form of the monomer complexes [(107)Ag+PAH](+) and measured in the selected-ion monitoring (SIM) mode, were 0.31, 0.63, 0.16 and 1.25 pmol/5 microl injection, respectively (S/N ratio approximately 2-3).     

Two dimensional TLC determination of PAH in diluted automobile exhaust gases

A method is described for the determination of polycyclic aromatic hydrocarbons (PAH) in the diluted exhaust gas of diesel vehicles. Sampling is done by drawing off proportional streams from the dilution tunnel. The particulates deposited on filters are sublimed, and the sublimate is purified and prefractionated on silica gel. Further separation and quantitative determination of the PAH is performed by two dimensional TLC in conjunction with In situ fluorescence spectrometry. Results of theoretical considerations and experimental data on the distribution of the emitted PAH between particulate matter and the corresponding gas phase in diluted exhaust are presented. A modified Langmuir adsorption model is used to explain the effects of dilution ratio and sample temperature in the dilution tunnel. Comparison of the emission values for PAH obtained from diluted and undiluted exhaust shows good agreement. Furthermore, the PAH contents of the exhaust gas of several diesel-engined cars are also compared for various driving cycles.     

Direct LD-FTMS detection of mineral-associated PAHs and their influence on the detection of co-existing amino acids

Polycyclic aromatic hydrocarbon (PAH) compounds and amino acids (AAs) are both ubiquitous throughout the universe and can be co-located in mineral matrices (e.g., meteorites); therefore, co-detection of PAHs and AAs associated with terrestrial and extra-terrestrial minerals is of interest. Nine PAH compounds representing four chemical classes of PAH (unsubstituted, acetyl-, amino-, and nitro-substituted) were applied onto the surface of quartz, plagioclase, olivine, and ilmenite mineral standards and analyzed using laser desorption/ionization Fourier transform mass spectrometry (LD-FTMS). Mass-to-charge peaks derived from PAH compounds were detected from the surfaces of all minerals evaluated. All PAH compounds were detected in the positive ion mode, whereas only nitro-substituted PAH compounds were detected in negative ion mode. In this and earlier studies, the ability to directly detect mineral-associated AAs by LD-FTMS was dependent on the mineral geomatrix. On iron-bearing minerals AAs appeared as highly fragmented ions in the spectra or were not detectable; however, the addition of the PAH chrysene enabled the ionization and detection of AAs threonine and histidine by LD-FTMS. Thus, for mineral systems such as meteorites, interstellar dust particles, soils, and sediments, the co-detection of AAs associated with PAHs by LD-FTMS is feasible.     

Decomposition‐Assembly of Tetraphenylethylene Nanoparticles With Uniform Size and Aggregation‐Induced Emission property

Tetraphenylethylene (TPE)‐substituted poly(allylamine hydrochloride) (PAH‐g‐TPE) is synthesized by a Schiff base reaction between PAH and TPE‐CHO. The PAH‐g‐TPE forms micelles in water at pH 6, which are further transformed into pure TPE‐CHO nanoparticles (NPs) with a diameter of ≈300 nm after incubation in a solution of low pH value. In contrast, only amorphous precipitates are obtained when TPE‐CHO methanol solution is incubated in water. The aggregation‐induced emission feature of the TPE molecule is completely retained in the TPE NPs, which can be internalized into cells and show blue fluorescence. Formation mechanism of the TPE NPs is proposed by taking into account the guidance effect of linear and charged PAH molecules, and the propeller‐stacking manner between the TPE‐CHO molecules.     

A systematic approach for optimisation of supercritical-fluid extraction of polycyclic aromatic hydrocarbons from earthworms

A systematic approach using a mathematical model as an alternative to time-consuming empirical optimisation of a supercritical-fluid extraction (SFE) procedure is presented. The model was applied to the extraction of 15 polycyclic aromatic hydrocarbons (PAH). The selected fat-containing matrix is the earthworm used in ecotoxicological absorption studies. Settings for optimal recovery were established for the important parameters (temperature, pressure, amount of trapping sorbent, flow, and dynamic extraction time) using a D-optimal experimental design (including quadratic terms and interactions). The recoveries were modelled using a two sigmoid-model with parameters for each of the individual PAH. The main objective was to optimise the conditions for 15 PAH congeners by maximisation of the lowest recovery. The results show that for some parameters, e.g. the amount of sorbent material, optimal conditions are identical for all PAH. For other parameters, e.g. extraction time, the optimum is PAH dependent. The advantage of this optimisation procedure is that, within three days of analysis (73 experiments), optimised extraction conditions for the extraction of the set of 15 PAH were found but also optimum conditions for specific subsets can be extracted from the collected data for specific subsets.