Study on the Phase Behavior of Supercritical CO2／Dynol—604／Water System and Solubilization of Methyl Orange in the Microemulsions

It was found that Dynol-604, a non-fluorous and no silicon-containing nonionic surfactant,was soluble in supercritical (SC) CO2. The phase behavior of SC CO2/Dynol-604/water system was studies. The results showed that one-phase water-in-CO2 microemulsions could be fromed. The solubilization of methyl orange in the microemulsions proved further the existence of water domain in the microemulsions.     

Self-assembled reverse micelles in supercritical CO2 entrap protein in native state

Molecular dynamics simulations of random quaternary mixtures of protein-water-CO2-fluorosurfactants show the self-assembly of reverse micelles in supercritical carbon dioxide where the protein becomes entrapped inside the aqueous pool. Analyses show that the protein native state remains intact in the water pool. This is because of the bulk nature of the enclosed water that provides a suitable environment for the extracted protein. Results from ab initio calculations imply that the existing fluorosurfactants can be made more effective in stabilizing water-in-CO2 microemulsions by a partial hydrogenation in their tails. A Lewis acid-Lewis base interaction among CO2 and the surfactant tails enhances the stability of the aqueous droplets substantially. The study can help accelerate the search for surfactant process for environmentally benign applications in dense CO2.     

Phase equilibrium for surfactant Ls-54 in liquid CO(2) with water and solubility estimation using the Peng-Robinson equation of state

It is known that the commercial surfactant Dehypon^® Ls-54 is soluble in supercritical CO₂ and that it enables formation of water-in-CO₂ microemulsions. In this work we observed phase equilibrium for the Ls-54/CO₂ and Ls-54/water/CO₂ systems in the liquid CO₂ region, from 278.15 to 298.15 K. In addition, the Peng–Robinson equation of state (PREOS) was used to model the phase behavior of Ls-54/CO₂ binary system as well as to estimate water solubilities in CO₂. Ls-54 in CO₂ can have solubilities as high as 0.086 M at 278.15 K and 15.2 MPa. The stability of the microemulsion decreases with increasing concentration of water, and lower temperatures favor increased solubility of water into the one-phase microemulsion. The PREOS model showed satisfactory agreement with the experimental data for both Ls-54/CO₂ and water/CO₂ systems.     

Carbon dioxide-in-water microemulsions

Liquid and supercritical carbon dioxide swell potassium carboxylate perfluoropolyether (PFPE-K) cylindrical micelles in water to produce novel CO(2)-in-water (C/W) microemulsions. The swelling elongates the micelles significantly from 20 to 80 nm as the molar ratio of CO(2) in the micelles to surfactant (R(CO2)) reaches approximately 8. As the micelles swell to form microemulsions, the solubility of pyrene increases by a factor of ca. 10. Fluorescence spectra suggest that pyrene resides primarily in the low-polarity micelle core rather than in the palisade region. The results illustrate the ability of C/W microemulsions to solubilize both lipophilic and fluorophilic substances simultaneously.     

Hybrid fluorocarbon-hydrocarbon CO2-philic surfactants. 2. formation and properties of water-in-CO2 microemulsions

Hybrid fluorocarbon-hydrocarbon (F-H) sulfate surfactants are shown to be efficient stabilizers in water-in-CO2 (w/c) microemulsions. The chain structure and F-H ratio affect the regions of P-T phase stability and aggregation structure in these w/c phases. High-pressure near-infrared spectroscopy and small-angle neutron scattering measurements of microemulsified water provide evidence for the stabilization of w/c microemulsion droplets. The relative lengths of the two chains were found to influence the favored aggregation structure: for symmetric chain surfactants (F8H8, F7H7) spherical reverse micelles are present, but for asymmetric chain surfactants (F7H4, F8H4) extended cylinder aggregates form. These changes in aggregation are consistent with different surfactant packing parameters owing to the controlled variations in molecular structure. Furthermore, the general order of w/c phase transition pressures (F8H8 < F7H7 and F8H4 < F7H4) is in line with estimations of surfactant fractional free volume, as proposed by Johnston et al. (J. Phys. Chem. B 2004, 108, 1962-1966). Studies of adsorption at the poly(dimethylsiloxane)-water interface are shown to be valuable for assessing the CO2-philicity of new surfactants. All in all, the symmetric F8H8 and F7H7 analogues are seen to be the most efficient compounds from this class for applications in CO2.     

Phase behavior of CO2-expanded fluorinated microemulsions

The formation of CO2-expanded, fluorinated reverse microemulsions is demonstrated for the system of perfluoropolyether (PFPE) surfactant (ClPFPE-NH4, MW = 632) and PFPE oil (PFPE, MW = 580). The phase behavior of this system is examined as a function of temperature (25-45 degrees C), pressure, CO2 concentration, and water to surfactant molar ratios (W0 = 10 and 20). Visual observations of one-phase behavior consistent with reverse microemulsion formation are further supported by spectroscopic measurements that establish the existence of a bulk water environment within the aqueous core. Microemulsion formation is not observed in the absence of CO2 for this PFPE surfactant/PFPE oil system, and a CO2 content greater than 70 mol % is required to induce microemulsion formation. Over the range of water loadings and temperatures investigated, the lowest cloud point pressure is observed at 46 bar (5 wt % ClPFPE-NH4 in PFPE oil, W0 = 20, xCO2 = 0.7, T = 25 degrees C). In the regions where one-phase behavior is observed, the cloud point pressures increase with temperature, water loadings, and CO2 content. The driving forces of microemulsion formation in the CO2-expanded fluorinated solvent are discussed relative to traditional reverse microemulsions and CO2-continuous microemulsions.     

Super-efficient surfactant for stabilizing water-in-carbon dioxide microemulsions

The fluorinated double-tailed glutarate anionic surfactant, sodium 1,5-bis[(1H,1H,2H,2H-perfluorodecyl)oxy]-1,5-dioxopentane-2-sulfonate (8FG(EO)(2)), was found to stabilize water-in-supercritical CO(2) microemulsions with high water-to-surfactant molar ratios (W(0)). Studies were carried out here to obtain detailed information on the phase stability and nanostructure of the microemulsions by using a high-pressure UV-vis dye probe and small-angle neutron scattering (SANS) measurements. The UV-vis spectra, with methyl orange as a reporter dye, indicated a maximum attainable W(0) of 60 at 45 and 75 °C, and SANS profiles indicated regular droplet swelling with a linear relationship between the water core nanodroplet radius and W(0). This represents the highest water solubilization reported to date for any water-in-CO(2) microemulsion. Further analysis of the SANS data indicated critical packing parameters for 8FG(EO)(2) at the microemulsion interface >1.34, representing approximately 1.1 times the value for common aerosol-OT in water-in-heptane microemulsions under equivalent conditions.     

NMR and SANS studies of aggregation and microemulsion formation by phosphorus fluorosurfactants in liquid and supercritical carbon dioxide

(1)H NMR relaxation and diffusion studies were performed on water-in-CO(2) (W/C) microemulsion systems formed with phosphorus fluorosurfactants of bis[2-(F-hexyl)ethyl] phosphate salts (DiF(8)), having different counterions (Na(+), NH(4)(+), N(CH(3))(4)(+)) by means of high-pressure in situ NMR. Water has a low solubility in CO(2) and is mainly solubilized by the microemulsion droplets formed with surfactants added to CO(2) and water mixtures. There is rapid exchange of water between the bulk CO(2) and the microemulsion droplets; however, NMR relaxation measurements show that the entrapped water has restricted motion, and there is little "free" water in the core. Counterions entrapped by the droplets are mostly associated with the surfactant headgroups: diffusion measurements show that counterions and the surfactant molecules move together with a diffusion coefficient that is associated with the droplet. The outer shell of the microemulsion droplets consists of the surfactant tails with some associated CO(2). For W/C microemulsions formed with the phosphate-based surfactant having the ammonia counterion (A-DiF(8)), the (1)H NMR signal for NH(4)(+) shows a much larger diffusion coefficient than that of the surfactant tails. This apparent paradox is explained on the basis of proton exchange between water and the ammonium ion. The observed dependence of the relaxation time (T(2)) on W(0) (mole ratio of water to surfactant in the droplets) for water and NH(4)(+) can also be explained by this exchange model. The average hydrodynamic radius of A-DiF(8) microemulsion droplets estimated from NMR diffusion measurements (25 degrees C, 206 bar, W(0) = 5) was R(h) = 2.0 nm. Assuming the theoretical ratio of R(g)/R(h) = 0.775 for a solid sphere, where R(g) is the radius of gyration, the equivalent hydrodynamic radius from SANS is R(h) = 1.87 nm. The radii measured by the two techniques are in reasonable agreement, as the two techniques are weighted to measure somewhat different parts of the micelle structure.     

高压CO~2对反胶束溶解蛋白质性质的影响

在308.15K下,研究了表面活性剂琥珀酸二(2-乙基己基)酯磺酸钠(Aerosol-Ot,简称AOT)的浓度和水的含量不同时,溶解的CO~2对反胶束溶解牛血清蛋白(BSA)的性质和异辛烷中AOT反胶束稳定性的影响。实验表明,在适当条件下,CO~2可以使反胶束溶液中的蛋白质全部析出。本研究对有关机理进行了初步分析。     

Recycling nanoparticles stabilized in water-in-CO2 microemulsions for catalytic hydrogenations

Catalytic hydrogenations of olefins took place effectively in supercritical CO2 with Pd0 nanoparticles dispersed in the fluid phase using a water-in-CO2 microemulsion consisting of water, sodium bis(2-ethylhexyl) sulfosuccinate (AOT) as a surfactant, and 1-octanol as a cosolvent. The hydrogenated products dissolved in supercritical CO2 can be separated from the octanol solution containing AOT microemulsions with Pd0 nanoparticles by phase separation (upper phase, supercritical CO2 with hydrogenated products; lower phase, 1-octanol containing AOT microemulsions with Pd0 nanoparticles) accompanied by reduction of CO2 pressure. After collecting the hydrogenated products by flowing the upper CO2 phase to a collection vessel, the Pd0 nanoparticles remaining in the lower phase can be redispersed into supercritical CO2 by pressurizing the system to a pressure where a homogeneous phase is attained. The redispersed nanoparticles can be reused as catalysts for the next runs of the hydrogenations. Triphenylethylene was hydrogenated to 1,1,2-triphenylethane at conversions of 100% (1st-3rd runs), >99% (4th run), and >96% (5th run) using the recycled Pd0 nanoparticles. The feasibility of using other organic solvents as cosolvents is also studied in the present paper.     

Fluorescence Spectroscopy Study of Polyoxyethylene Surfactant Micellar Systems

The systems investigated by fluorescence spectroscopy and atomic force microscopy were water/ethoxylated mono, di-glyceride/oil + ethanol. The oils were R (+)-limonene and isopropylmyristate. The mixing ratio (w/w) of ethanol/oil equals unity. The fluorescent probes auramine-O and 8-anilino-1-naphthalenesulfonic acid were used to determine the minimum ω′ value for the transition of reverse micelles to microemulsions in the systems based on the two oils, as well as at different surfactant contents. The fluorescence quenching of Safranine-T (3,6-diamino-2,7-dimethyl-5 phenyl phenazinium chloride) by the inorganic ions Fe²⁺, Fe³⁺ and Cu²⁺ was studied in reverse micelles and microemulsions. The Stern–Volmer quenching constants at different water/surfactant molar ratios (ω values) were calculated from the data of the quenching process. Atomic force microscopy was used to image the systems based on the two oils for different water to surfactant molar ratios below and above the minimum ω′ value.     

Dynamical and rheological properties of fluorinated surfactant films adsorbed at the pressurized CO2-H2O interface

The dynamics of adsorption, interfacial tension, and rheological properties of two phosphocholine-derived partially fluorinated surfactants FnHmPC, designed to compensate for the weak CO(2)-surfactant tail interactions, were determined at the pressurized CO(2)-H(2)O interface. The two surfactants differ only by the length of the hydrocarbon spacer (5 CH(2) in F8H5PC and 11 CH(2) in F8H11PC) located between the terminal perfluoroalkyl chain and the polar head. The length of this spacer was found to have a critical impact on the adsorption kinetics and elasticity of the interfacial surfactant film. F8H5PC is soluble in both water and CO(2) phases and presents several distinct successive interfacial behaviors when bulk water concentration (C(W)) increases and displays a nonclassical isotherm shape. The isotherms of F8H5PC are similar for the three CO(2) pressures investigated and comprise four regimes. In the first regime, at low C(W), the interfacial tension is controlled by the organization that occurs between H(2)O and CO(2). The second regime corresponds to the adsorption of the surfactant as a monolayer until the CO(2) phase is saturated with F8H5PC, resulting in a first inflection point. In this regime, F8H5PC molecules reach maximal compaction and display the highest apparent interfacial elasticity. In the third regime, a second inflection is observed that corresponds to the critical micelle concentration of the surfactant in water. At the highest concentrations (fourth regime), the interfacial films are purely viscous and highly flexible, suggesting the capacity for this surfactant to produce water-in-CO(2) microemulsion. In this regime, surfactant adsorption is very fast and equilibrium is reached in less than 100 s. The behavior of F8H11PC is drastically different: it forms micelles only in the water phase, resulting in a classical Gibbs interface. This surfactant decreases the interfacial tension down to 1 mN/m and forms a strongly elastic interface. As this surfactant forms a very cohesive interface, it should be suitable for formulating stable water-in-CO(2) emulsions. The finding that the length of the hydrocarbon spacer in partially fluorinated surfactants can drastically influence film properties at the CO(2)-H(2)O interface should help control the formation of microemulsions versus emulsions and help elaborate a rationale for the design of surfactants specifically adapted to pressurized CO(2).     

Improved solubilization of carbamazepine and structural transitions in nonionic microemulsions upon aqueous phase dilution

Solubilization capacity and structural transformations in nonionic microemulsions characterized by a large continuous isotropic region forming dilutable self-assembled nanodroplets containing solubilized carbamazepine, were studied along dilution lines 73 and 82 (70 and 80 wt% surfactant and 30 and 20 wt% of oil phase, respectively). The preparations were based on pharma-grade ingredients, water, R-(+)-limonene, ethanol, propylene glycol, and Tween 60. Solubilization capacity (SC) of the drug was dependent on the microstructure of the microemulsion and on the surfactant-to-oil phase weight ratio. The SC in the concentrate (reversed micelles) was 15 times higher than its solubility in the oil. Transition of the W/O microemulsion to a bicontinuous phase and to O/W droplets were indentified by electrical conductivity, viscosity, SAXS, and SD-NMR measurements. Once the system is diluted to 90 wt% aqueous phase, the SC is 10 and 16-fold higher, along dilution lines 73 and 82, respectively, than in pure water. Being solubilized, carbamazepine serves as a cosurfactant therefore it affects the curvatures of the microstructures and consequently the boundaries of the structural regions and the transition points between the different phases. Dilutable microemulsions are promising new carbamazepine vehicles for oral intake.     

Transition from Micelles to Microemulsions in Sugar-Based Surfactant Systems Probed by Fluorescence Spectroscopy and Atomic Force Microscopy

The systems investigated by fluorescence spectroscopy and atomic force microscopy were water/sucrose laurate/oil + ethanol. The oils were R (+)-limonene and isopropylmyristate. The mixing ratio (w/w) of ethanol/oil equals unity. The fluorescent probes auramine-O and 8-anilino-1-naphthalenesulfonic acid were used to determine the minimum ω′ value for the transition of reverse micelles to microemulsions in the systems based on the two oils, as well as at different surfactant contents. The fluorescence quenching of Safranine-T (3, 6-diamino-2,7-dimethyl-5 phenyl phenazinium chloride) by the inorganic ions Fe²⁺, Fe³⁺, and Cu²⁺ was studied in reverse micelles and microemulsions. The Stern-Volmer quenching constants at different water/surfactant molar ratios (ω values) were calculated from the data of the quenching process. Atomic force microscopy was used to image the systems based on the two oils for different water to surfactant molar ratios below and above the minimum ω′ value.     

Concentrated CO(2)-in-Water Emulsions with Nonionic Polymeric Surfactants

Concentrated CO(2)-in-water (C/W) emulsions are reported for amphiphiles containing alkylene oxide-, siloxane-, and fluorocarbon-based tails as a function of temperature and salinity. Poly(ethylene oxide)-b-poly(butylene oxide) (EO(15)-b-BO(12)) can emulsify up to 70% CO(2) with droplet sizes from 2 to 4 &mgr;m in diameter, as determined by video-enhanced microscopy. This emulsion is stable over 48 h against both flocculation and coalescence. In contrast, it is extremely difficult to form concentrated water-in-CO(2) (W/C) emulsions with surfactants containing alkylene oxide moieties due to limited solvation of such tails by CO(2). In several cases, C/W emulsions are formed even when the surfactant prefers CO(2). This violation of Bancroft's rule may be attributed in part to the low viscosity of the compressed CO(2), which governs several mass and momentum transport mechanisms relevant to emulsion formation and stabilization. For the first time, W/C microemulsions are observed in a system with a nonionic amphiphile, namely F(CF(2)CF(2))(3-8)CH(2)CH(2)O(CH(2)CH(2)O)(10-15)H. For the same system, the emulsion morphology changes from C/W to W/C as the temperature increases. The electrical conductivity of C/W emulsions is predicted successfully as a function of the dispersed phase volume fraction of CO(2) with Maxwell's theory for inhomogeneous systems. Copyright 2001 Academic Press.     

Enhanced solubilization of bovine serum albumin in reverse micelles by compressed CO2

The effect of compressed CO2 on the solubilization of bovine serum albumin (BSA) in water/sodium bis-(2-ethylhexyl) sulfosuccinate (AOT)/isooctane reverse micelles was studied by observing phase behavior and recording UV-visible spectra under different conditions. The pH values within the water cores of reverse micelles at different CO2 pressures were also determined. The solubilization capacity of the reverse micelles for the protein increased considerably as CO2 pressure increased within the low-pressure range, but decreased at higher CO2 pressures, so that the micelles eventually lost their ability to solubilize the protein. The effect of CO2 on the stability of the reverse micelles played an important role in the relationship between pressure and protein solubility. A "multicomplex" model was proposed to explain these effects. The different solublization capacities within different pressure ranges demonstrates the unique advantage of using compressed CO2 in the extraction of proteins with reverse micelles.     

Effect of compressed CO2 on the properties of lecithin reverse micelles

Lecithin is a very useful biosurfactant. In this work, the effects of compressed CO 2 on the critical micelle concentration (cmc) of lecithin in cyclohexane and solubilization of water, lysozyme, and PdCl 2 in the lecithin reverse micelles were studied. The micropolarity and pH value of the polar cores of the reverse micelles with and without CO 2 were also investigated. It was found that CO 2 could reduce the cmc of the micellar solution and enhance the capacity of the reverse micelles to solubilize water, the biomolecule, and the inorganic salt significantly. Moreover, the water pools could not be formed in the reverse micelles in the absence of CO 2 because of the limited amount of water solubilized. However, the water pools could be formed in the presence of CO 2 because large amounts of water could be solubilized. All of these provide more opportunity for effective utilization of this green surfactant. The possible mechanism for tuning the properties of the reverse micelles by CO 2 is discussed.     

Small-angle neutron scattering and theoretical investigation of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) stabilized oil-in-water microemulsions

The aim of this study is to determine the effects of oil solutes and alcohol cosolvents on the structure of oil-in-water microemulsions stabilized by poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymers. The systems investigated involved the solubilization of 1,3,5-trimethylbenzene or 1,2-dichlorobenzene by P123 (EO(20)-PO(70)-EO(20)) pluronic surfactant micelles in water and water + ethanol solvents. The structures of these swollen micelles were determined by small-angle neutron scattering (SANS). A thermodynamic model was employed to interpret the characterization data. The results of the thermodynamic model for micellization agreed well with the SANS data from samples of micelles swollen by both oils. The model predicted the size of the micelles within 5% accuracy using only one fitting parameter, the micelle polydispersity. Ethanol had significantly different effects on the polymer micelles that contained solubilized oil compared to pure polymer micelles. For pure polymer micelles, the addition of ethanol increased the solubility of the polymer and, therefore, decreased the total volume fraction of micelles, while for polymer-oil aggregates, ethanol tended to have a positive effect on the volume fraction of micelles. SANS results showed that the greatest divergence from pure aqueous solvent results occurred at oil concentrations above the microemulsion stability limit.     

Molecular dynamics simulation of a reverse micelle self assembly in supercritical CO2

In this communication we report on molecular dynamics computer simulations of self-assembly of reverse micelles in supercritical carbon dioxide. The reverse micelles contain perfluoropolyether ammonium carboxylate surfactants and an aqueous core. We observed a quick self-assembly of these micelles over time periods of approximately 5 ns, irrespective of initial conditions. In most cases, the self-assembled perfluorinated reverse micelles have a nice spherical shape and properties consistent with experiments. When the fluorinated surfactant is replaced by its hydrogenated analogue, the assembled aggregate contains a region of direct contact between water and carbon dioxide, indicating that hydrogenated surfactant is not a good agent for creation of microemulsions in water/carbon dioxide mixtures.     

Electrochemical Behavior of Anthraquinone in Reverse Micelles and Microemulsions of Cetyltrimethylammonium Bromide

The electrochemical behavior of an anthraquinone (AQ) was studied in aqueous solutions at a glassy carbon electrode, using the sodium salt of anthraquinone-2-sulfonic acid (AQS), by employing cyclic voltammetry. AQ undergoes a two-electron reduction in aqueous media. The electrochemical behavior of AQ was also investigated in micelles, reverse micelles (CTAB/1-butanol/water), and microemulsions (CTAB/1-butanol/water/cyclohexane) of cetyltrimethylammonium bromide (CTAB). The electrode reactions of AQ in reverse micelles and microemulsions are nearly reversible at low oil (cyclohexane) content. However, at higher oil content, the reversibility is gradually lost. In the case of reverse micelles, the reduction current, as well as the reduction potential, of AQ depend on the transition from a micellar solution to a stable solution of reverse micelles that occurs with added 1-butanol. In microemulsions, the change in cyclohexane content was found to cause a linear increase in the peak current for AQ reduction as well as a linear decrease in the corresponding reduction potential. As the cyclohexane content is increased, the o/w microemulsions dominated by micelles undergo a transition to a w/o microemulsion dominated by reverse micelles, which causes changes in the electrochemical behavior.