Coupled liquid-liquid extraction and column switching LC for the determination of a new antihistaminic H1 drug in human urine

Summary Mizolastine (SL 85.0324) is a new antihistaminic H₁ benzimidazole derivative which is excreted into urine almost completely metabolized; about 2% of the unchanged drug is excreted as conjugated compound which requires enzymatic deconjugation before analysis. Since the existing methods for plasma samples do not work on deconjugated human urine due to interferences, a new method was developed. The method is based on a diethyl-ether extraction of mizolastine and an internal standard from alkalinized urine. The ether extract is back-extracted with an aqueous buffer (pH=2.6), this extract is neutralized (pH=6.5) and an aliquot injected into a C₁₈ pre-column where clean up and preconcentration take place. The analytes are then desorbed from the pre-column and transferred to the analytical column. The analytical column is a C₁₈ type specially seactivated for basic compounds with an eluent of acetonitrile/phosphate solution (pH=4.5), 40/60, v/v, at a flow rate of 1 ml min^–1. Detection is at 285 nm. The method is linear in the range 10–500 ng ml^–1 with a lower limit of detection of 10 ng ml^–1. The precision and accuracy, evaluated during intra-day and inter-day assays, are satisfactory for pharmacokinetic investigations.     

HPLC with Column Switching Coupled to APCI–MS for Pharmacokinetic Study of Amygdalin in Rabbit Plasma

A fast and validated assay was established for the pharmacokinetic study of amygdalin in Armeniacae Semen in rabbit. The method involved column switching (CS) enrichment, separation, post-column derivatization, and atmospheric pressure chemical ionization (APCI) mass spectrometric detection. Plasma sample was enriched by CS using a MAYI-ODS as the first column. Analytes of interest were isolated and analyzed on a second column of Zorbax SB-C₁₈. To detect amygdalin in plasma samples, a T-piece was connected between the HPLC outlet and the APCI source to add a mixture of dichloromethane and methanol to the eluent by an isocratic pump. Calibration graphs showed good linearity over a range of 1.0–1,280 ng mL⁻¹. The detection limit was 0.2 ng mL⁻¹. The intra- and inter-day accuracies were within 3.9%. The method was successfully applied to a study of the pharmacokinetics of amygdalin after an intravenous injection of amygdalin extracts to rabbits with a dose of 400 mg kg⁻¹. The results indicate that amygdalin is a one-compartment open model with a first order absorption phase.     

Preparation and Evaluation of Octadecyl-Bonded ZrO2/SiO2

ZrO₂/SiO₂ particles, which were prepared by a layer-by-layer self-assemble technique and consist of micrometer-sized silica spheres as cores and nanometer-sized zirconia particles as surface coatings, have a higher surface area and pore volume than other zirconia supports have. Further more it is more stable than silica is. In this paper we made a reversed-phase support by bonding octadecyltrichlorosilane on ZrO₂/SiO₂ particles, it had a comparable high carbon amount of 9.62% and good chemical stability being stable up to pH 11. The chromatographic behavior showed that the support acted as a true reversed chromatographic stationary phase and had a hydrophobic selectivity. Basic and aromatic compounds are well separated and the peaks are symmetrical.     

The boron trifluoride nitromethane adduct

The separation of the boron isotopes using boron trifluoride·organic-donor, Lewis acid·base adducts is an essential first step in preparing ¹⁰B enriched and depleted crystalline solids so vital to nuclear studies and reactor applications such as enriched MgB₂, boron carbide, ZrB₂, HfB₂, aluminum boron alloys, and depleted silicon circuits for radiation hardening and neutron diffraction crystal structure studies. The appearance of this new adduct with such superior properties demands attention in the continuing search for more effective and efficient means of separation. An evaluation of the boron trifluoride nitromethane adduct, its thermodynamic and physical properties related to large-scale isotopic separation is presented. Its remarkably high separation factor was confirmed to be higher than the expected theoretical value. However, the reportedly high acid/donor ratio was proven to be an order of magnitude lower. On-going research is determining the crystal structure of deuterated and ¹¹B enriched ¹¹BF₃·CD₃NO₂ by X-ray and neutron diffraction.     

On the relationship between band broadening and the particle-size distribution of the packing material in liquid chromatography: theory and practice

The influence of the particle size distribution (PSD) on the band broadening and the efficiency of packed columns is investigated on both theoretical and practical viewpoints. Each of the classical contributions to mass transfer kinetics, those due to longitudinal diffusion, eddy dispersion, and solid–liquid mass transfer resistance are measured and analyzed in terms of their expected and observed intensity as a function of the PSD of mixtures of the commercially available packing materials, 5 and 3 μm Luna-C₁₈(2) particles (Phenomenex, Torrance, CA, USA). Six 4.6 mm × 150 mm columns were packed with different mixtures of these two materials. The efficiencies of these columns were measured for a non-retained and a retained analytes in a mixture of acetonitrile and water. The longitudinal diffusion coefficient was directly measured by the peak parking method. The solid–liquid mass transfer coefficient was measured from the combination of the peak parking method, the best model of effective diffusion coefficient and the actual PSDs of the different particle mixtures measured by Coulter counter experiments. The eddy diffusion term was measured according to a recently developed protocol, by numerical integration of the peak profiles. Our results clearly show that the PSD has no measurable impact on any of the coefficients of the van Deemter equation. On the contrary and surprisingly, adding a small fraction of large particles to a batch of small particles can improve the quality of the packing of the fine particles. Our results indirectly confirm that the success of sub-3 μm shell particles is due to the roughness of their external surface, which contributes to eliminate most of the nefarious wall effects.     

Specific salt effects in hydrophobic interaction chromatography of proteins

Summary It has been noted in the literature that certain salts enter into specific interaction with proteins. As a result of this, they may act as salting-in agents. We have investigated the effect of magnesium chloride which is known to possess such unusual properties on the retention of proteins in hydrophobic-interaction chromatography. First the retention behaviour of amino acids and small peptides having a wide polarity range was studied on reversed-phase columns using eluents containing (NH₄)₂SO₄, MgSO₄ or MgCl₂, in wide the concentration ranges. For less polar eluites plots of the logarithmic retention factors against the salt concentration were found to be linear, whereas the more polar species showed irregular behavior. The retention of a wide range of proteins was measured on a TSK Phenyl-5-PW column using eluents containing (NH₄)₂SO₄, MgSO₄ or MgCl₂ at different concentrations.The salt-mediated retention was regular with (NH₄)₂ SO₄ and MgSO₄ although MgSO₄ showed a lesser effect than that predicted by the surface-tension increment. The effect of MgCl₂ was quite irregular: the retention factors either increased or decreased or remained unchanged depending on the protein. These results corroborate earlier observations regarding the particular effect of MgCl₂ and suggest the modulation of selectivity in hyrophobic-interaction chromatography by the addition of MgCl₂ to the eluent.     

Synthesis and identification of endohedral metallofullerenes La@C82

The effect of the procedure of preparation of lanthanum-graphite electrodes and the regime of their evaporation in the electric arc on the yield of endometallofullerene La@C₈₂ has been studied. La@C₈₂ was identified by ESR spectroscopy, optical spectroscopy, and mass spectrometry. The fractional extraction of the fullerene-containing soot witho-xylene makes it possible to separate La@C₈₂ from higher fullerenes containing no metal atorns and to obtain fullerene extracts enriched in La@C₈₂. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 254–258, February, 1997.     

Titrimetric determination of silicon dissolved in concentrated HF-HNO3-etching solutions

The wet chemical etching of silicon by concentrated HF-HNO₃ mixtures in solar and semiconductor wafer fabrication requires the strict control of the etching conditions. Surface morphology and etch rates are mainly affected by the amount of dissolved silicon, that is continuously enriched in the etching solution with each etching run. A fast and robust method for the titrimetric determination of the total dissolved silicon content out of the concentrated etching solution is presented. This method is based on the difference between the two equivalence points of the total amount of acid and the hydrolysis of the hexafluorosilicic anion. This approach allows a silicon determination directly from the etching process in spite of the presence of dissolved nitric oxides in the etching solution. The influences of different acid mixing ratios and of the etching solution density depending on the silicon content is considered and discussed in detail.     

High performance liquid chromatography determination of chlorophenols in water samples after preconcentration by continuous flow liquid membrane extraction on-line coupled with a precolumn

A continuous flow liquid membrane extraction (CFLME)-C₁₈ precolumn-liquid chromatography system was developed for preconcentration and determination of chlorinated phenols (CPs). After preconcentration by CFLME, which is based on the combination of continuous flow liquid-liquid extraction and supported liquid membrane, CPs were enriched in 960 μl of 0.5 mol l⁻¹ NaOH used as acceptor. This acceptor was on-line neutralized and transported onto the C₁₈ precolumn where analytes were absorbed and focused. Then the focused analytes were injected onto the C₁₈ analytical column for separation and detected at 215 nm with a diode array detector. CFLME related parameters such as flow rates, pH of donor and acceptor concentration were optimized. The proposed method presents detection limits of 0.02-0.09 μg l⁻¹ (S/N=3) when 100 ml samples were enriched. The proposed method was successfully applied to determine CPs in tap water and river water samples with spiked recoveries in the range of 70-121%.     

Development of core–shell structure Fe3O4@Ta2O5 microspheres for selective enrichment of phosphopeptides for mass spectrometry analysis

Protein phosphorylation is one of the most important post-translational modifications. Due to the dynamic nature and low stoichiometry of the protein phosphorylation, enrichment of phosphopeptides from proteolytic mixtures is often necessary prior to their characterization by mass spectrometry. Many metal oxides such as titanium dioxide and zirconium dioxide have been successfully applied to isolation and enrichment of phosphopeptides. Recently, niobium pentoxide was proved to have the ability for selective enrichment of phosphopeptides. Considering the proximity of tantalum to niobium, we supposed that Ta₂O₅ can be used as affinity probes for phosphopeptide enrichment. In the work, we synthesized Fe₃O₄@Ta₂O₅ magnetic microspheres with core–shell structure for selective enrichment of phosphopeptides. To demonstrate its ability for selective enrichment of phosphopeptides, we applied Fe₃O₄@Ta₂O₅ magnetic microspheres to isolation and enrichment of the phosphopeptides from tryptic digestion of standard proteins and real samples, and then the enriched peptides were analyzed by matrix-assisted laser desorption mass spectrometry analysis (MALDI-MS) or liquid chromatography coupled to electrospray ionization mass spectrometry (LC–ESI-MS). Experiment results demonstrate that Ta₂O₅ coated-magnetic microspheres show the excellent potential for selective enrichment of phosphopeptides.     

Aminopropyl-silica as an advantageous alternative to nonpolar sorbents for continuous cleanup/preconcentration of vitamin D3 metabolites

Summary A new procedure for continuous cleanup and concentration of hydroxyvitamin D₃ metabolites prior to their separation by HPLC and UV-detection is reported. The process is based on the use of aminopropyl-silica as solid-phase sorbent as an alternative to the use of nonpolar sorbents. The improvement thus achieved has been tested by comparing the results with those obtained using octadecyl-C₁₈ as non-polar sorbent. The comparison has been based on the calibration graphs (linear range, detection and quantitation limits), precision and multiple standard addition method.     

Analysis of organic pollutants in water at trace levels using fully automated solid-phase extraction coupled to high-performance liquid chromatography

Summary A method has been developed for the determination of trace levels of 32 pesticides, 19 explosives and 16 polycyclic aromatic hydrocarbons (PAH) in water in three individual steps. Solid-phase enrichment (SPE) is coupled to high-performance liquid chromatography (HPLC) with a fully automated system. The organic pollutants are enriched on reusable cartridges packed with adsorbent materials: pesticides and explosives on a mixed bed of divinylbenzene-ethylvinylbenzene copolymers (LiChrolut EN^?) and perfluorinated polyethylene (PolyF^?), and polycyclic aromatic hydrocarbons on C₁₈-modified silica (Zorbax^? ODS1). Thermally assisted desorption (TAD) has been shown to increase the recovery of analytes significantly. As all enriched analytes are transferred to the detector, only fifty millilitres of sample is needed for each single on-line analysis, compared with at least a litre for conventional methods. The separation of the enriched organic analytes is performed on specialized HPLC columns based on reversed-phase materials. The limits of detection of the system employed were found to be below 100 ng L⁻¹. Use of fluorescence detection for the polycyclic aromatic hydrocarbons resulted in limits of detection in the upper pg L⁻¹ range. Thek values, number of theoretical plates, the recovery rates and the limits of detection of this method for fast screening of organic pollutants from three fifty-millilitre aqueous samples are described. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Enhanced sensitivity by laser-induced fluorescence for the determination of calcitriol and other vitamin D3 metabolites in plasma

Summary A sensitive method for the determination of hydroxymetabolites of vitamin D₃, parficularly calcitriol (1,25-(OH)₂-D₃), in human plasma is reported. The method is based on the use of laser-induced fluorescence detection as an alternative to conventional fluorimetry in an integrated cleanup/preconcentration, HPLC separation and post-column derivatization system. The derivatization step is based on a dehydration reaction which takes place in secosteroid structures at high temperature in a strong-acid medium. A LOD of 0.01 pg mL⁻¹ (SNR=3) was obtained for each analyte with a linear dynamic range over 4 order of magnitude with excellent regression coefficients (≥0.9922) in all cases. The precision was studied at two concentration levels and the RSDs values (for n=5) were acceptable (between 2.6 and 4.7%). The method was also checked by applying it to human plasma spiked with the target analytes and excellent recoveries were obtained. This is the first time that these species have been determined at the sub-pg mL⁻¹ level.     

Peak parking technique for the simultaneous determination of anions and cations

An ion chromatography method is described for the simultaneous determination of anions (Cl^–, NO₃^–, and SO₄^2–) and cations (Na⁺, NH₄⁺, K⁺, Mg²⁺, and Ca²⁺) using a single pump, a single eluent and a single detector. An anion-exchange column modified with chondroitin sulfate C facilitated the elution of the above three anions using 5 mM tartaric acid as the eluent in isocratic mode, whereas the same eluent facilitated the separation of the above five cations on a commercially-available cation-exchange column. The separation columns were connected in series via two six-port switching valves, so the required cation-exchange or anion-exchange separation could be carried out by selecting the appropriate positions for the switching valves. The separations were completed in 30 min.     

Purification of thymine dimer from monomer solution in preparative liquid chromatography

Summary Cyclobutane pyrimidine dimers and monomers of thymine were separated on a C₁₈ reversed-phase high performance liquid chromatographic column. Using two mathematical models, the effect of the sample sizes on peak shapes in preparative liquid chromatography was investigated. One of these approaches is through a linear kinetic model, and the other is based on the non-linear adsorption isotherm. With the injection of small samples good agreement between the calculated value by the linear kinetic model and experimental, data were achieved. With increased sample size, this model is defective in its prediction of large concentration profiles of sample. However, the nonlinear model permits the accurate prediction of the location of the component band and the determination of the appropriate time to start and stop collection of the enriched fraction at higher concentrations of monomer and the lower concentrations of dimer. Therefore, extremely small amounts of dimer can be extracted from monomer solutions.     

Determination of Vitamin B6 Compounds in Foods Using Liquid Chromatography with Post-Column Derivatization Fluorescence Detection

The liquid chromatographic determination of six vitamin B₆-related compounds, the three B₆ vitamers, their corresponding phosphorylated esters, and an excretion product, is optimized using the reversed-phase technique with a stationary phase based on a ligand with amide groups and the endcapping of trimethylsilyl. The isocratic mobile phase consisted of a phosphate buffer, and fluorescence detection involved a post-column derivatization reaction using sodium hydrogensulphite to enhance the fluorescence of the phosphate ester. Peaks were identified by the retention characteristics and fluorescence spectra. Detection limits ranged from 1–25 ng mL^–1. Two extraction procedures using acid hydrolysis and enzymatic hydrolysis were compared. The method was applied to the determination of B₆ vitamin derivatives in different types of food including beef liver, egg yolk, baby food cereals and honey. The natural free vitamers appeared in honey and baby food cereals, while the phosphorylated esters were found in the foods of animal origin. An assay using two certified reference materials gave results within the certified range.     

Influence of isomerism on the chromatographic behaviour of porphyrins

Summary The chromatographic behaviour of some porphyrins and their complexes with zinc has been studied by HPLC on 150×3.9 mm and 300×3.9 mm columns packed with Nova-Pak C₁₈ and μ-Bondapak C₁₈, respectively, and on a microcolumn (64×2 mm) packed with Nucleosil C₁₈. The effect of the nature and the arrangement of side substituents in the porphyrin molecules on retention is considered. It is demonstrated that HPLC can be used for the separation ofcis-andtrans-isomers (atropisomers) of the zinc complex of 5,15-di(phenyl-2-CH₃O)-3,7,13,17-tetramethyl-2,8,12,18-tetrabutylporphyrin and other porphyrins with a similar structure. The efficiency of separation has been compared on different columns.     

Separation of Monovinyl and Divinyl Protochlorophyllides Using C30 Reverse Phase High Performance Liquid Chromatography Column: Analytical and Preparative Applications

A new, high performance liquid chromatography method has been developed for the separation of monovinyl- and divinyl-protochlorophyllides, using commercially available, C₃₀ reverse phase column and isocratic elution. This method can be used both for analytical applications and preparative scale purification of monovinyl- and divinyl-protochlorophyllides using the same column where submilimolar concentrations of the crude protochlorophyllide extract can be separated in one run. The purity of the obtained protochlorophyllides was demonstrated by spectroscopic methods, as well by the formation of aggregates in toluene.     

Performance of columns packed with the new shell particles,Kinetex-C18

The performance of the new Kinetex-C₁₈ column was investigated. Packed with a new brand of porous shell particles, this column has an outstanding efficiency. Once corrected for the contribution of the instrument extra column volume, the minimum values of the reduced plate heights for a number of low molecular weight compounds (e.g., anthracene and naphtho[2,3-a]pyrene) were between 1.0 and 1.3, breaking the legendary record set 3 years ago by Halo-C₁₈ packed columns. The liquid-solid mass transfer of proteins (e.g., insulin and lyzozyme) is exceptionally fast on Kinetex-C₁₈ much faster than on the Halo-C₁₈ column. The different contributions of dispersion and mass transfer resistances to the column efficiency were determined and discussed. The possible reasons for this extremely high column efficiency are discussed.     

Silanol group effect in C18 bonded phases in HPLC

Summary If any residual (free) silanol groups remain at the surface of silica gel after bonding treatment, they may affect the retention of solutes since the dissociated groups (SiO^–) will attract cations. The silanol group effect on the retention of cationic solutes will increase with increasing pH of the mobile phase but the effect will decrease with increasing hydrophobic-ion concentration at the C₁₈ surface because such ions can mask the residual silanol groups. A method for the separation of metal complexes with 2-(5-bromo-2-pyridylazo)-diethylaminephenol (5-Br-PADAP) has been developed. The hydrophobic ion in the MeOH/H₂O mobile phase was tetrabutylammonium (TBA).