A Multi-Component Solvent System for the Analysis of a Candidate Antimalarial by Normal Phase HPLC

Abstract

The new candidate antimalarial WR 180,409·H₃PO₄ (DL-threo-α-(2-piperidyl)-2-trifluoromethyl-6-(4-trifluoromethylphenyl)-4-pyridinemethanol phosphate) and its internal standard, WR 184,806·H₃PO₄ (DL-2,8-bis(trifluoromethyl)-4-[1-hydroxy-3-(N-t-butylamino)propyl]-quinoline phosphate) are both hydrophobic, highly lipid soluble compounds. Organic extracts of biological fluids of these compounds can be separated and analyzed by normal phase systems. These organic extracts can be chromatographed by means of a Waters μ Bondapak CN column utilizing an organic solvent system composed of two major components (ethylene dichloride and hexane), one minor component (acetonitrile) and two trace modifiers (formic acid and water). Alterations in the proportions of the major components induce predictable shifts in the retention of the antimalarial and its internal standard, while alterations in the proportions of the minor component with respect to these major components induce predictable changes in column selectivity. If the trace modifiers are stabilized in proportionate amounts, proper concentrations of the major components will isolate the antimalarial and internal standard fraction from significant interference while simultaneous alteration of the amount of minor component will effect separation of the antimalarial from the internal standards.     

Functionalized SBA-15 mesoporous silica in ion chromatography of alkali,alkaline earths,ammonium and transition metal ions

The retention properties of a SBA-15 mesoporous silica functionalized with –(CH₂)₃COOH groups, synthesized by a co-condensation route, were investigated for the ion chromatography of different cationic species. A systematic study on the effect of different eluent compositions containing non-complexing (methanesulfonic acid) or complexing (oxalic or pyridine-2,6-dicarboxylic acids) eluents, in the presence of organic modifiers (CH₃CN, CH₃OH, CH₃NH₂) on the retention of cations (Li⁺, Na⁺, K⁺, Ca²⁺, Mg²⁺, Sr²⁺, Ba²⁺, NH₄⁺, Cu²⁺, Ni²⁺, Zn²⁺, Cd²⁺, Co²⁺, Pb²⁺, Fe³⁺) chosen as model analytes and for their environmental importance, allowed us to elucidate the mechanisms (cation-exchange or complexation) involved in the retention on the SBA-15 phase. For the first time separations of cations on SBA-15 based stationary phases are investigated, providing the basis for further development of mesoporous silica chemistry for in-flow ion-exchange applications.     

Implications of on-line FTIR detection in the separation of coal-derived products via HPLC with polar modifiers

Summary Fourier-transform infrared spectrometry (FTIR) was utilized as a detection system for high-performance liquid chromatography of polar compounds on a normal bonded-phase system. In addition to FTIR, UV (254 nm) and refractive index detection were employed in the separation of model compounds containing oxygen and nitrogen atoms in their molecules (phenols, alcohols, neutral and weakly basic nitrogen compounds). A polar amino-cyano (PAC) bonded-phase column was employed with a binary mobile phase (98:2 CDCl₃:CH₃CN). The separations and the information gained from each detector is discussed, including interactions between sample material and mobile phase. A polar fraction of a coal-derived product is also chromatographed under identical conditions. The results based on FTIR detection and chromatographic retention behavior suggest the exclusive presence of hindered and unhindered phenols.     

Rapid Supercritical Fluid Chromatography Method for Separation of Chlorthalidone Enantiomers

Supercritical fluid chromatography employing chiral stationary phases is a popular separation technique to perform enantioselective separations. The main advantages of supercritical fluid chromatography are low analysis time, low consumption of organic modifiers, and therefore lower costs and higher environmental friendliness. A novel method for the separation of chlorthalidone enantiomers, widely used diuretic drug, is reported that clearly demonstrates the advantages of supercritical fluid chromatography. The effects of the amount and type of organic modifiers, temperature, and back pressure on enantioselectivity and resolution of the enantiomers were evaluated. The baseline separation was achieved in less than 2.5 min in the optimized system composed of Chiralpak AD column, mobile phase CO₂/MeOH 50/50 (v/v), temperature 40°C, a flow rate of 4.0 mL/min, and 120 bar back pressure. Moreover, enantiomers of chlorthalidone were determined in two commercially available pharmaceuticals. The proposed method may be easily transferred to a semi-preparative scale.     

Molecularly imprinted solid phase extraction for rapid screening of cephalexin in human plasma and serum

A molecularly imprinted solid phase extraction (MISPE) method was developed for the rapid screening of cephalexin in human plasma and serum. The method employed a micro-column packed with molecularly imprinted polymer (MIP) particles for the selective solid phase extraction (SPE) of cephalexin. Since the MIP interacted indiscriminately with two other α-aminocephalosporins, cefradine and cefadroxil, their removal was ultimately achieved using differential pulsed elution (DPE) with acetonitrile+12% acetic acid. Cephalexin was then determined in a final pulsed elution (FPE) with methanol+1% trifluoroacetic (CF₃COOH, TFA) acid. This excellent selectivity represents a significant advance in analytical separation, demonstrating how a MIP can differentiate between molecules that are structurally dissimilar only in their non-hydrogen-bonding moieties, even if their hydrogen-bonding moieties are identical to each other. With UV detection, a concentration detection limit of 0.1 μg/ml (or 2 ng in 20 μl) was afforded for cephalexin. By increasing the CHCl₃ flow rate to 1.25 ml/min, each MISPE-DPE-FPE analysis required only 2 min to complete. Rapid screening was demonstrated in a modified MISPE-PE method, which used 14% CH₃COOH+CH₃CN as the mobile phase, followed by direct PE with 1% TFA+CH₃OH.     

Effect of pore size of packing materials on molecular-weight separation by temperature gradient interaction chromatography

Temperature gradient interaction chromatography (TGIC) is an interactive polymer chromatography technique varying the column temperature during the elution in a programmed manner to control the solute retention. In the present paper, the effect of the pore size of packing materials on the molecular-weight separation of polystyrene and poly(methyl methacrylate) standard samples by TGIC was studied by using the columns (octadecyl modified silica) with different pore size (100, 300 and 1000 Å) and eluent mixture of CH₂Cl₂/CH₃CN. By rising temperature gradient, both polymers were separated by molecular weight from lower to higher. It became clear that each sample elutes out earlier as the pore size is larger. These experimental results could be explained by the theory based on the scaling concept of Gorbunov and Skvortsov.     

Determination of artesunate using reversed‐phase HPLC at increased temperature and ELSD detection

Artesunate (ART) determination can be performed by evaporative light scattering detection with mobile phase composed of CH₃CN/HCOOH 0.01 M (40:60 v/v; pH 2.85). Evaporative light scattering detection instead of UV detection allowed to improve the sensitivity and the LOD. However, the evaporative light scattering detection response of dihydro‐artemisinin appears weaker than for ART, whereas with UV detection the response of ART and dihydroartemisinin seemed similar. Constant analysis time was obtained on using the mobile phase with a flow rate of 0.5 mL/min and column temperature at 60°C instead of 0.7 mL/min at room temperature. This led to less solvent consumption. Moreover, decrease in the flow rate and increase in the column temperature were advantageous for higher sensitivity with both evaporative light scattering detection and UV detection. ART determination in rectal gel and suppositories were compared with these different detection modes and similar results were obtained.     

Retention studies of 2′-2′-difluorodeoxycytidine and 2′-2′-difluorodeoxyuridine nucleosides and nucleotides on porous graphitic carbon: Development of a liquid chromatography–tandem mass spectrometry method

The development of a method for the separation of 2′-2′-difluorodeoxycytidine (gemcitabine, dFdC), 2′-2′-difluorodeoxyuridine (dFdU) and their mono-, di- and triphosphates using a porous graphitic carbon column (Hypercarb), without ion-pairing agent, is described. The retention of dFdC and dFdU could be controlled with an organic modifier (acetonitrile, CH₃CN) and the retention of the anionic nucleotides with an eluting ion (bicarbonate). Separation of all analytes was achieved using a 0–25 mM ammonium bicarbonate gradient in CH₃CN–H₂O (15:85, v/v). Under these conditions, however, very long re-equilibration times were required. Injection of an acidic solution (100 μL 10% formic acid in H₂O, v/v; 2.65 M) after running a gradient directly restored the separation capabilities of the column. Still, separation between the analytes slowly deteriorated over a period of months. These problems were solved by preconditioning the column with a pH buffered hydrogen peroxide (H₂O₂) solution (0.05% H₂O₂ in CH₃CN–H₂O (15:85, v/v), pH 4) before starting an analytical run. The oxidation of the stationary phase with H₂O₂ prevented its slow reduction, which most likely caused the decreasing retention times. The analytes were detected using tandem mass spectrometry.     

High Performance Liquid Chromato-Graphic Method For The Determination Of Permethrin Deposits In A Forestry Spray Trial

Abstract

A convenient and sensitive reversed-phase high performance liquid Chromatographie method has been developed for the determination of perraethrin [3-phenoxybenzyl (±)- cis,trans -3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate] insecticide. Various isocratic and gradient mobile phases, consisting of acetonitrile:water (CH₃CN:H₂O) and methanol:water (CH₃OH:H₂O) solvent systems at two flow rates, were tested to separate and quantify the Isoners of permethrin using octadecylsilyl (ODS) (Regis 5μ m) and octylsilyl (OS) (RP-8, 10 μ m) bonded columns. The optimal mobile phase for perraethrin using the ODS column was 70:30 (v/v) CH₃CN:H₂O mixture at flow rates of either 1.0 or 1.5 mL/min. The measurement was done with a UV detector at 200 nm and 50°C. The OS column gave a less satisfactory separation than the ODS. Gradient elution systems examined did not improve the iso-meric separation of perraethrin. Using the method developed, deposit levels obtained on various sampling units during a perraethrin spray trial were analyzed after elution or extraction followed by necessary column cleanup. Minimum levels of detection for permethrin varied from 1 to 3 ng depending on the nature of the sampler used.     

A three-factor Doehlert matrix design in optimising the determination of octadecyltrimethylammonium bromide by cation-exchange chromatography with suppressed conductivity detection

A simple and effective chromatographic method with suppressed conductivity detection was developed and validated to determine dissolved samples of octadecyltrimethylammonium bromide (C₁₈H₃₇N⁺Me₃Br⁻, ODTAB) for purity testing. A response surface methodology generated with a Doehlert matrix design was applied to optimize the chromatographic and detection conditions in ion-exchange chromatography (IEC) with conductivity detection in the chemical suppression mode. A three-factor Doehlert design was performed to fit a second-order model and jointly optimize the peak intensity and shorten analysis time through a global desirability function. Regenerant flow rate, volume fraction of acetonitrile in the acidic eluent and its flow rate were studied at seven, five and three levels, respectively. The optimized separation and detection conditions were accomplished by using a cation-exchange column eluted at 0.5 mL min⁻¹ with an isocratic mobile phase composed of CH₃CN and 25 mN H₂SO₄, 82/18 (v/v). Chemical suppression of ionic conductivity was performed by 100 mN tetrabutylammonium hydroxide (TBAOH) as a regenerant at a flow-rate of 4.0 mL min⁻¹. Remarkably good agreement was found between predicted and experimental values of signal intensity and chromatographic retention. With the developed method, a linear calibration curve of ODTA⁺ as bromide salt from 5 to 1000 ppm was obtained using hexadecyltrimethylammonium bromide as internal standard. The estimated limit of detection was 0.3 ppm (S/N = 3). The effectiveness of electrochemically suppressed conductivity detection of ODTA⁺ was also demonstrated, thus making easier the whole detection operation and instrumental needs as well.     

Direct kinetics study of the temperature dependence of the CH2O branching channel for the CH3O2 + HO2 reaction

A direct kinetics study of the temperature dependence of the CH₂O branching channel for the CH₃O₂ + HO₂ reaction has been performed using the turbulent flow technique with high‐pressure chemical ionization mass spectrometry for the detection of reactants and products. The temperature dependence of the CH₂O‐producing channel rate constant was investigated between 298 and 218 K at a pressure of 100 Torr, and the data were fitted to the following Arrhenius expression: 1.6 × 10^?15 × exp[(1730 ± 130)/T] cm³ molecule^?1 s^?1. Using the Arrhenius expression for the overall rate of the CH₃O₂ + HO₂ reaction and this result, the 298 K branching ratio for the CH₂O producing channel is measured to be 0.11, and the branching ratio is calculated to increase to a value of 0.31 at 218 K, the lowest temperature accessed in this study. The results are compared to the analogous CH₃O₂ + CH₃O₂ reaction and the potential atmospheric ramifications of significant CH₂O production from the CH₃O₂ + HO₂ reaction are discussed. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 363–376, 2001     

A high‐performance liquid chromatography assay with a triazole‐bonded column for evaluation of d‐amino acid oxidase activity

Elution profiles of kynurenic acid (KYNA) and 7‐chlorokynurenic acid (Cl‐KYNA) were examined by high‐performance liquid chromatography (HPLC) using a triazole‐bonded stationary phase column (Cosmosil® HILIC) under isocratic elution of a mobile phase consisting of CH₃CN–aqueous 10 mm ammonium formate between pH 3.0 and 6.0. The capacity factors of KYNA and Cl‐KYNA varied with both the CH₃CN content and the pH of the mobile phase. The elution order of KYNA and Cl‐KYNA was reversed between the CH₃CN‐ and H₂O‐rich mobile phases, suggesting that hydrophilic interactions and anion‐exchange interactions caused retention of KYNA and Cl‐KYNA in the CH₃CN‐ and H₂O‐rich mobile phases, respectively. The present HPLC method using a triazole‐bonded column and fluorescence detection (excitation 250 nm, emission 398 nm) was applied to monitor in vitro production of KYNA from d ‐kynurenine (d ‐KYN) by d ‐amino acid oxidase (DAO) using Cl‐KYNA as an internal standard. A single KYNA peak was clearly observed after enzymatic reaction of d ‐KYN with DAO. Production of KYNA from d ‐KYN was suppressed by the addition of commercial DAO inhibitors. The present HPLC method can be used to evaluate DAO activity and DAO inhibitory effects in candidate drugs for the treatment of schizophrenia. Copyright © 2015 John Wiley & Sons, Ltd.     

Chromatographic Analysis of Pharmaceutical Products of Toxicological Interest on Chemically Bonded Thin Layers Influence of the Organic Modifier Nature on Selectivity

Abstract

Properties and selectivities of the following organic modifiers were studied: CH₃OH - C₂H₅OH - Isopropanol - acetonitrile - T.H.F. in reversed phase high performance thin-layer chromatography (H.P.T.L.C.). With the tested solutes, ethanol appeared to be the most selective organic modifier whereas isopropanol the most interesting in HPTLC-HPLC data transfer. In every case, the best resolution was observed with mobile phases containing 40-50% H₂O.     

Theoretical study on the gas phase reaction of acrylonitrile with atomic hydrogen

The complex potential energy surface of the H + CH₂=CHCN reaction has been investigated at the BMC-CCSD level based on the geometric parameters optimized at the BHandHLYP/6-311++G(d,p) level. This reaction is revealed to be one of the significant loss processes of acrylonitrile. The BHandHLYP and M05-2X methods are employed to obtain initial geometries. The reaction mechanism confirms that H can attack on the C=C double bond or C and N atom of –CN group to form the chemically activated adducts IM1 (CH₃CHCN), IM2 (CH₂CH₂CN), IM3′ (CH₂=CHCHN) and IM5 (CH₂=CHCNH), and direct H-abstraction paths may also occur. Temperature- and pressure-dependent rate constants have been carried out using Rice–Ramsperger–Kassel–Marcus theory with tunneling correction. IM1 (CH₃CHCN) formed by collisional stabilization is the major product at the 760 Torr pressure of H₂ and in the temperature range (200–1,600 K); whereas the production of IM2 (CH₂CH₂CN) is the main channel at 1,600–3,000 K. The calculated rate constants are in good agreement with the experimental data.     

Rate coefficients for the reactions of OH radicals with Methylglyoxal and Acetaldehyde

Rate coefficients have been measured for the reaction of OH radicals with methylglyoxal from 260 to 333 K using the discharge flow technique and laser-induced fluorescence detection of OH. The rate coefficient was found to be (1.32±0.30) × 10^?11 cm³ molecule^?1 s^?1 at room temperature, with a distinct negative temperature dependence (E/R of ?830 ± 300 K). These are the first measurements of the temperature dependence of this reaction. The reaction of OH with acetaldehyde was also investigated, and a rate coefficient of (1.45 ± 0.25) × 10^?11 cm³ molecule^?1 s^?1 was found at room temperature, in accord with recent studies. Experiments in which O₂ was added to the flow showed regeneration of OH following the reaction of CH₃CO radicals with O₂. However, chamber experiments at atmospheric pressure using FTIR detection showed no evidence for OH production. FTIR experiments have also been used to investigate the chemistry of the CH₃COCO radical formed by hydrogen abstraction from methylglyoxal. © 1995 John Wiley & Sons, Inc.     

Ligand effects in the hydroformylation of acrylonitrile by cobalt carbonyl

The hydroformylation of acrylonitrile (VCN) using Co₂(CO)₈/L (L  HN(CH₂CN)₂, H₂C(CH₂)₃NMe, Me₂N(CH₂)₂NMeH, PPh₃, and PCy₃) has been examined in methanol solvent. Four reaction pathways are observed which are dependent on L. With no L or with L  HN(CH₂CN)₂, the reaction produces the desired acetal (MeO)₂CHCH₂CH₂CN. For the more basic amines the reaction produces ～ 50% yields of hydrodimerization products NCCHMe(CH₂)₂CN/NC(CH₂)₄CN in a 10/1 ratio and an ～ 30% yield of the hydrogenation product CH₃CH₂CN. These reactions are shown to be metal catalyzed. The main reaction for Co₂(CO)₈/PR₃ catalyzed systems appears to be a classical Michael addition reaction of the solvent, methanol, with acrylonitrile to give MeOCH₂CH₂CN. Evidence is given to show that this reaction is catalyzed by phosphine which has dissociated under reaction conditions and not by a ligated cobalt complex.     

Influence of Guest Exchange on the Magnetization Dynamics of Dilanthanide Single‐Molecule‐Magnet Nodes within a Metal–Organic Framework

Multitopic organic linkers can provide a means to organize metal cluster nodes in a regular three‐dimensional array. Herein, we show that isonicotinic acid N‐oxide (HINO) serves as the linker in the formation of a metal–organic framework featuring Dy₂ single‐molecule magnets as nodes. Importantly, guest solvent exchange induces a reversible single‐crystal to single‐crystal transformation between the phases Dy₂(INO)₄(NO₃)₂?2 solvent (solvent=DMF (Dy₂‐DMF), CH₃CN (Dy₂‐CH₃CN)), thereby switching the effective magnetic relaxation barrier (determined by ac magnetic susceptibility measurements) between a negligible value for Dy₂‐DMF and 76 cm^?1 for Dy₂‐CH₃CN. Ab initio calculations indicate that this difference arises not from a significant change in the intrinsic relaxation barrier of the Dy₂ nodes, but rather from a slowing of the relaxation rate of incoherent quantum tunneling of the magnetization by two orders of magnitude.     

Separation of anabolic steroids by micellar electrokinetic capillary chromatography

Summary The separation of seven analogous anabolic steroids was studied by micellar electrokinetic capillary chromatography (MECC). The retention order was found to be dependent on polarity. All of these steroids were well separated by the addition of organic modifiers to the separation buffer. Of the organic modifiers tested, 1-propanol gave the best separation, better than methanol or acetonitrile.     

Decomposition of Cyanogen Chloride by Using a Packed Bed Plasma Reactor at Dry and Wet Air in Atmospheric Pressure

The decomposition rate of CNCl in a BaTiO₃-filled Packed Bed Plasma Reactor was studied as a function of AC input power, power frequency, residence time in the reactor, and inlet flow rate. The decomposition rate was compared with those of CH₃CN and CCl₂CHCl. Under the condition of 6.7 Wh/m³ specific energy den- sity, the decomposition rate of CNCl was found to be 50%, which is lower than those of CH₃CN and CCl₂CHCl at the same or similar conditions. At a higher frequency of the power input system, the decomposition rate of inlet gas becomes lower due to a decrease in field strength for the same level of power. And, under the same level of input power, a higher decomposition rate was obtained at an increased residence time. The relation between gas decomposition rates stemmed from the electron–molecule collision and bounding energy within the molecule. The decomposition ratio of CNCl was lower than those of CCl₂CHCl and CH₃CN because the bond strength of the weakest bond in the molecule is higher. In order to test the decomposition efficiency of CNCl with catalytic packing material in a plasma reactor, the catalyst of γ-Al₂O₃ and Pt/γ-Al₂O₃ was packed in the packed bed plasma reactor. Although byproducts were formed, the plasma-catalyst hybrid reactor containing Pt/γ-Al₂O₃ showed a higher efficiency in CNCl decomposition as shown in the decomposition rate of above 99% in 0.3 kWh/m³.