复合纤维素固定化脲酶对铜离子的吸附作用

脲酶对重金属离子极为敏感。由复合纤维素（CC）固定化脲酸对铜离子的吸附现象得出的结论是：脲酶吸附的Cu~(2+)总量与其活性没有定量关系，而是与固酶重量成比例。从而可以认为，重金属离子不是直接作用于脲酶活性部位使其中毒的，很可能是作用于脲酶大分子其他部位，使分子构象变形后导致脲酶失活的。由于CC固酶对Cu~(2+)有吸附作用，且又不污染系统，所以可用其除去食品、药物及水中的Cu~(2+)离子。     

Preparation of a potentiometric immobilized urease electrode and urea determination in serum

Polyvinylalcohol was activated with 2-fluoro-1-methylpyridiniumtoluene-4-sulphonate and urease (EC.3.5.1.5) was covalently linked to the activated matrix. PVA-urease was then immobilized on the surface of a pH glass electrode with gelatine gel and it was cross-linked using glutaraldehyde. This potentiometric membrane electrode provides a linearity to urea in the 8.910⁻⁵ to 1.110⁻³ M concentration range, but by changing the buffer concentration can be studied in the range of 10⁻⁴ to 10⁻² M urea concentration. Reproducibility experiments (n:20) were carried out with the urease enzyme electrode and with photometric methods for pooled serum sample. Average values for the two methods were 5.96 and 5.86 mM, variation coefficients were 2.5 and 3.5% respectively.     

Living photolytic ring-opening polymerization of amino-functionalized [1]ferrocenophanes: synthesis and layer-by-layer self-assembly of well-defined water-soluble polyferrocenylsilane polyelectrolytes

Facile synthetic routes have been developed that provide access to cationic and anionic water-soluble polyferrocenylsilane (PFS) polyelectrolytes with controlled molecular weight and narrow polydispersity. Living photolytic ring-opening polymerization of amino-functionalized [1]ferrocenophane (fc) monomers [fcSiMe{C[triple chemical bond]CCH(2)N(SiMe(2)CH(2))(2)}] (3), [fcSi{C[triple chemical bond]CCH(2)N(SiMe(2)CH(2))(2)}(2)] (10), [fcSiMe(C[triple chemical bond]CCH(2)NMe(2))] (14), and [fcSiMe(p-C(6)H(4)CH(2)NMe(2))] (20) yielded the corresponding polyferrocenylsilanes [(fcSiMe{C[triple chemical bond]CCH(2)N(SiMe(2)CH(2))(2)})(n)](5), [(fcSi{C[triple chemical bond]CCH(2)N(SiMe(2)CH(2))(2)}(2))(n)] (11), [{fcSiMe(C[triple chemical bond]CCH(2)NMe(2))}(n)] (15), and [{fcSiMe(p-C(6)H(4)CH(2)NMe(2))}(n)] (21) with controlled architectures. Further derivatization of 5, 15, and 21 generated water-soluble polyelectrolytes [(fcSiMe{C[triple chemical bond]CCH(2)N(CH(2)CH(2)CH(2)SO(3)Na)(2)})(n)] (6), [{fcSiMe(C[triple chemical bond]CCH(2)NMe(3)OSO(3)Me)}(n)] (7), and [{fcSiMe(p-C(6)H(4)CH(2)NMe(3)OSO(3)Me)}(n)] (22), respectively. The polyelectrolytes were readily soluble in water and NaCl aqueous solutions, with 6 and 22 exhibiting long-term stability in aqueous media. The PFS materials 6 and 22, have been utilized in the layer-by-layer (LbL) self-assembly of electrostatic superlattices. Our preliminary studies have indicated that films made from controlled low molecular-weight PFSs possess a considerably thinner bilayer thickness and higher refractive index than those made from PFSs that have an uncontrolled high molecular-weight. These results suggest that the structure and optical properties of LbL ultra-thin films can be tuned by varying polyelectrolyte chain length. The water-soluble low molecular weight PFSs are also useful materials for a range of applications including LbL self-assembly in highly confined spaces.     

Microstructures and growth characteristics of polyelectrolytes on silicon using layer-by-layer assembly

Growth processes of nanocomposite layers obtained by polyelectrolytes, poly(sodium 4-styrenesulfonate) (PSS) and poly(diallyldimethylammonium chloride) (PDADMAC), self-assembled on silicon surface using layer-by-layer (LbL) technique were investigated, and theoretical and experimental data are herein reported. Complementary microstructural and compositional analyses techniques (scanning electron microscopy, ellipsometry, X-ray reflectivity, zeta (ξ) potential measurements and attenuated total reflection infrared spectroscopy) were used for deep characterization of the multilayer structure formation. Electrophoretic zeta (ξ) potential measurements indicated that the surface charge was either positive or negative, depending on the polyelectrolyte used (PDADMAC or PSS). ATR-IR spectra confirmed the successfully silanization process and then, the building up of the nanocomposite layer. Morphological investigation and X-ray reflectivity demonstrated the growth process and cross-section size of the bilayers. Ellipsometric measurements were in very good agreement with SEM and XRR, showing once again the successful deposition of polyelectrolyte multilayers.      

Immobilization of urease on composite fibre by using a gel formation of cellulose acetate and titanium iso-propoxide

Urease was entrap-immobilized on composite gel fibre of cellulose acetate and TiO₂. The immobilization can be easily performed under mild conditions. The gel fibre is stable in high ionic solutions and in phosphate solutions with a range of pH 6–8.The pH and thermal stabilities of immobilized urease were higher than those of the native one.     

The enzymatic determination of mercury and copper using acid urease. The effects of buffers

We report on a quick and simple test based on enzyme inhibition for the detection of mercury and copper using free acid urease coupled to an optical sensor system. Lipophilized Nile Blue was incorporated in plasticized poly(vinyl chloride) (PVC) to produce an ammonium-sensitive layer with a thickness of around 4 m. The layer was fixed on one side of a disposable cuvette. A solution of buffer, enzyme and heavy metals was placed into the thermostated cell. Enzymatic hydrolysis was started upon addition of urea and the formation of ammonium was monitored. Mercury and copper were the strongest inhibitors; for this reason the inhibitory efficiency of these metals was examined in citrate, acetate and trismaleate buffers. The cuvette test was most sensitive and selective for mercury in a citrate buffer. The limit of detection for mercury(II) ions was as low as 1 g/L. Copper ions do not interfere because of complexation by citrate. The inhibitory effects of metal combinations on the activity of acid urease and the effects of optimum pH of the enzyme and the transducer on the dynamic range of the cuvette test are presented.     

Study of thioflavin-T immobilized in porous silicon and the effect of different organic vapors on the fluorescence lifetime

Steady-state and time-resolved emission techniques have been employed to study the fluorescence properties of thioflavin-T (ThT) adsorbed on oxidized porous silicon (PSi) surfaces, with an average pore size of ～10 nm. We found that the average fluorescence decay time of ThT, when it is adsorbed on the PSi surface, is rather long, τ(av) = 1.3 ns. We attribute this relatively long emission lifetime to the effect of the immobilization of ThT on the PSi surface, which inhibit the rotation of the aniline with respect to the benzothiazole moieties of ThT. We also measured the fluorescence properties of ThT in PSi samples in equilibrium with vapors of several liquids, such as methanol, acetonitrile, and water. We found that the fluorescence intensity drops by a factor of 10, and the average decay time, measured by a time-correlated single-photon counting technique, decreases by a factor of 3. We explain these results in terms of liquid condensation of the vapors in the PSi pores, which leads to partial dissolution of the ThT molecules in the liquid pools.     

Speciation of silicon and phosphorous using liquid chromatography coupled with sector field high resolution ICP-MS

Sector-field high resolution inductively coupled plasma mass spectrometry (HR-ICP-MS) has been used, at R=3000, to resolve spectral interferences caused by N₂⁺ and CO⁺ on ²⁸Si⁺, and NOH⁺ and NO⁺ on ³¹P⁺, thereby facilitating the speciation of these elements. Polydimethylsiloxanes (PDMS), ranging from 162 g mol⁻¹ to 16 500 g mol⁻¹, and their silanol breakdown products, have been separated by size exclusion and reverse phase chromatography, respectively, and detected using HR-ICP-MS. Detection limits (as Si) of between 12–30 ng ml⁻¹ and 0.1–4 ng ml⁻¹ were obtained for the PDMS and silanol compounds, respectively. Quantitative and reproducible methods have been developed for the analysis of four common organophosphorous pesticides in blood plasma, and inorganic phosphates in food, with detection limits of between 0.9–2 ng ml⁻¹ and 1–39 ng ml^−1, respectively.     

基于层层组装钴铝水滑石/聚电解质包裹碳纳米管的无酶葡萄糖传感器

采用共沉淀法合成了钴铝水滑石(CoAl-LDH),将CoAl-LDH与PSS包裹的CNTs(CNTs@PSS)通过层层自组装法构筑CNTs@PSS/CoAl-LDH多层膜电极,并将其应用于葡萄糖的分析测定。X射线衍射光谱、红外光谱和SEM表明:共沉淀法合成的CoAl-LDH具有典型的水滑石特征峰及形貌。电化学阻抗谱表明:CoAl-LDH可与CNTs@PSS均匀有效地组装构筑多层膜。电化学研究表明:CNTs的引入很好地提高了CoAl-LDH修饰电极的灵敏度。研究结果表明该传感器对葡萄糖在3.0×10-6～4.98×10-4mol/L范围内呈良好的线性响应,灵敏度为1.03×10-3A.L/mol。     

Synergistic effect of ferric chloride and silicon mixtures on the thermal stabilization enhancement of ABS

A previous study from this laboratory has shown that Lewis acid-type transition metal chlorides (NiCl₂, CoCl₂, ZnCl₂, and FeCl₃) are effective char forming catalysts for ABS terpolymer in an inert atmosphere [Jang J, Kim JH, Bae JY. Polym Degrad Stab 2005;88(2):324.]. However, transition metal chloride catalysed char formation (and flame-retardance enhancement) of ABS in air was unsuccessful due to the oxidative degradation of the char at a higher temperature. In order to overcome these undesirable phenomena, we incorporated silicon with transition metal chlorides as co-catalyst and a series of ABS/transition metal chloride/silicon compounds were made from them and their flame retardancy was evaluated by measuring the limiting oxygen index (LOI) values. Our results showed that among various transition metal chloride/silicon catalyst systems the incorporated mixture of ferric chloride and silicon is very effective in enhancing the thermal stabilization of ABS and LOI value as high as 33 is obtained. The reason for this synergistic effect by ferric chloride and silicon was postulated to come from the interaction between ferric chloride and silicon at elevated temperatures, probably generating silicon tetrachloride and hydrogen chloride.     

磁性纳米颗粒固定化细菌纤维素酶的活性和稳定性

在氨水溶液中进行Fe+2和Fe+3离子共沉淀并水热处理后制得磁性纳米颗粒Fe3O4,通过戊二醛活化将纤维素酶固定于其上。采用基于响应面法的Box-Behnken法(BBD)优化了制备条件,如磁性纳米颗粒浓度、戊二醛浓度、酶浓度和交联时间。 BBD分析结果表明,用实验数据可合理调节二次模型。利用生成的基于统计数据的等高线评价了响应面的变化,以理解纳米颗粒和酶活性之间的关系。运用扫描电镜、X射线衍射和红外光谱表征了纳米颗粒上酶的尺寸、结构、形貌和结合情况。采用诸如pH值、温度、重复使用性和存储能力分析了固定化纤维素酶的活性和稳定性。发现固定后的纤维素酶表现出更好的稳定性和活性。     

Synthesis,solid-state structures,and urease inhibition activities of new copper(II) complexes based on O,N,O-tridentate Schiff bases

Six new complexes of copper(II) coordinated with O,N,O-tridentate Schiff base dianions were synthesized and structurally characterized. The solid-state structures of 1–6 contain four-coordinate mononuclear copper(II) units with a slightly distorted square planar geometry. Complexes 1 and 4 derived from d-tyrosine have an infinite 1-D, right-handed helical chain, while 5 derived from l-tyrosine has an infinite 1-D, left-handed helical chain. Inhibitions of jack bean urease by 1–6 have been investigated, and potent inhibitory activities with IC₅₀ range of 2.15 ± 0.11–32.12 ± 0.65 μM have been observed for these copper(II) complexes. A docking analysis using a DOCK program was conducted to position 4 into the jack bean urease active site to determine the probable binding conformation.     

The silicon effect on the regioselectivity of the Tsuji-Trost reaction. Experimental and theoretical approaches

Regioselectivity of the Tsuji-Trost reaction on allyl acetates and carbonates substituted with silyl groups at the olefinic moiety has been analyzed. Silicon atom in the central carbon atom increases the stability of the intermediate π-allylpalladium cation with respect to the isomeric π-allylpalladium cation featuring the silicon in a terminal carbon atom.     

Structure and resistivity of bismuth nanobelts in situ synthesized on silicon wafer through an ethanol-thermal method

Bismuth nanobelts in situ grown on a silicon wafer were synthesized through an ethanol-thermal method without any capping agent. The structure of the bismuth belt-silicon composite nanostructure was characterized by scanning electron microscope, energy-dispersive X-ray spectroscopy, and high resolution transmission electron microscope. The nanobelt is a multilayered structure 100-800 nm in width and over 50 μm in length. One layer has a thickness of about 50 nm. A unique sword-like nanostructure is observed as the initial structure of the nanobelts. From these observations, a possible growth mechanism of the nanobelt is proposed. Current-voltage property measurements indicate that the resistivity of the nanobelts is slightly larger than that of the bulk bismuth material.     

Kinetic parameters of urease immobilized on modified acrylonitrile copolymer membranes in the presence and absence of Cu(II) ions

Poly(acrylonitrile-methylmethacrylate-sodium vinylsulfonate) membranes were subjected to seven different chemical modifications and the amount of the newly formed groups was measured for each membrane. Urease was then covalently immobilized onto the modified membranes and the amount of bound protein was determined. The kinetic parameters V(max) and K(m) of the immobilized urease were studied under static and dynamic conditions. Results showed that the rate of the enzyme reaction was higher for the membranes modified with NH(2)OH . H(2)SO(4), NH(2)NH(2) . H(2)SO(4), NaOH + EDA and NaOH + GA + EDA. It was confirmed that the reaction rate, measured under dynamic conditions, was higher than that one determined under static conditions. The influence of Cu(II) ions, as inhibitors, on the enzyme reaction kinetics (V(i) and K(i)) was also investigated. It turned out that the most sensitive membranes towards Cu(II) were those modified with NH(2)NH(2) . H(2)SO(4), NaOH + EDA and H(2)O(2). The results initiated further investigations on the influence of other heavy metal ions (Cd(II), Zn(II), Ni(II) and Pb(II)) over urease bound to a NH(2)OH . H(2)SO(4)-modified membrane. It was found that the inhibition effect of the heavy metal ions over immobilized urease decreases in the order: Cu(II) > Cd(II) > Zn(II) > Ni(II) > Pb(II). [Diagram: see text]     

Method and mechanism of vapor phase treatment–total reflection X-ray fluorescence for trace element analysis on silicon wafer surface

Vapor phase treatment (VPT) is a pretreatment with hydrofluoric acid vapor to raise the sensitivity of total reflection X-ray fluorescence spectroscopy (TXRF) for trace metal analysis on silicon wafers. The International Organization for Standardization/Technical Committee 201/Working Group 2 (ISO/TC201/WG2) has been investigating the method to analyze 10⁹ atoms/cm² level of metallic contamination on the silicon wafer surface. Though VPT can enhance the TXRF signal intensity from the metallic contamination, it has turned out that the magnitude of the enhancement varies with the type of methods and the process conditions. In this study, approaches to increase TXRF intensity by VPT are investigated using a fuming chamber in an automated VPD instrument. Higher signal intensity can be obtained when condensation is formed on the sample surface in a humidifying atmosphere and with a decreasing stage temperature. Surface observations with SEM and AFM show that particles with ~ 4 μm in diameter are formed and unexpectedly they are dented from the top surface level.     

Calix[4]azacrowns: self-assembly and effect of chain length and O-alkylation on their metal ion-binding properties

Both the consequences of 1,3-cyclization of calix[4]arenes by diamide formation, and the effect of 2- and 2,4-alkoxycarbonylmethylation of two 1,3-bridged calix[4]azacrowns on their metal ion-binding capacities have been studied by synthesis of the derivatives in their cone conformation and measurement of the stability constants for their complexation in a range of alkaline earth and transition metal cations. In these two cases, the conformation of the ligand in the solid state has been defined in detail by a crystal structure determination. In the first case, a tubular architecture performing methanol channels is displayed, however, in the second case a zigzag architecture generated by a chloroform network connecting calixarene molecules is present. Speciation in solution appears to be limited to the formation of 1:2 and/or 1:1 and/or 2:1 (M-L) complexes, depending on the system, with values of the stability constants determined by absorption spectroscopy in acetonitrile, lying in the ranges log β₁₂ ca. 10, log β₁₁ ca. 2-5, and log β₂₁ ca. 7-9. There is evidence for selectivity toward Cu(II) and for some unexpected anion effects. None of these ligands appear to be an efficient extractant for the metals as their picrate.     

Isothermal titration microcalorimetric method for studying the combined ligand binding with application to the binding of ethylurea and (N,N)dimethylurea on urease

A simple, novel method was introduced for determining equilibrium constants and enthalpies of binding of two different competitive ligands on a macromolecule by isothermal titration microcalorimetry technique. This method was applied to the simultaneous binding of ethylurea (I) and (N,N)dimethylurea (X), on jack-bean urease at pH 7.0 (tris-base; 30 mM) at 27°C. The dissociation equilibrium constants measured by this method were markedly consistent with inhibition constants obtained from assay of enzyme activities in the presence of I and X.     

Determination of carcinoembryonic antigen using a novel amperometric enzyme-electrode based on layer-by-layer assembly of gold nanoparticles and thionine

Electrochemical sensing of carcinoembryonic antigen(CEA)on a gold electrode modified by the se- quential incorporation of the mediator,thionine(Thi),and gold nanoparticles(nano-Au),through co- valent linkage and electrostatic interactions onto a self-assembled monolayer configuration is de- scribed in this paper.The enzyme,horseradish peroxidase(HRP),was employed to block the possible remaining active sites of the nano-Au monolayer,avoid the non-specific adsorption,instead of bovine serum albumin(BSA),and amplify the response of the antigen-antibody reaction.Electrochemical ex- periments indicated highly efficient electron transfer by the imbedded Thi mediator and adsorbed nano-Au.The HRP kept its activity after immobilization,and the studied electrode showed sensitive response to CEA and high stability during a long period of storage.The working range for the system was 2.5 to 80.0 ng/mL with a detection limit of 0.90 ng/mL.The model membrane system in this work is a potential biosensor for mimicking the other immunosensor and enzyme sensor.