Simultaneous production of low- and high-frequency sounds by neonatal finless porpoises

Phocoenids are generally considered to be nonwhistling species that produce only high-frequency pulsed sounds. Here our results show that neonatal finless porpoises (Neophocaena phocaenoides) frequently produce clear low-frequency (2-3 kHz) pulsed signals, without distinct high-frequency energy, just after birth and can produce both low- (2-3 kHz) and high-frequency (>100 kHz) pulsed signals simultaneously until about 20 days postnatal. The results indicate that low-frequency signals of neonatal finless porpoises are not an early form of high-frequency signals and suggest that low- and high-frequency signals may be produced by different sound production mechanisms.     

The rodent ultrasound production mechanism.

Rodents produce two types of sounds, audible and ultrasonic, that differ markedly in physical structure. Studies of sound production in light gases show that whereas the audible cries appear to be produced, as in the case of most other mammals, by vibrating structures in the larynx, the ultrasonic cries are produced by a different mechanism, probably a whistle. 'Bird-call' whistles are shown to have all the properties of rodent ultrasonic cries and to mimic them in almost every detail. Thus it is concluded that rodents have two distinct sound production mechanisms, one for audible cries and one for ultrasonic cries.     

Comparison between visual and passive acoustic detection of finless porpoises in the Yangtze River, China

Recently, sonar signals and other sounds produced by cetaceans have been used for acoustic detection of individuals and groups in the wild. However, the detection probability ascertained by concomitant visual survey has not been demonstrated extensively. The finless porpoises (Neophocaena phocaenoides) have narrow band and high-frequency sonar signals, which are distinctive from background noises. Underwater sound monitoring with hydrophones (B&K8103) placed along the sides of a research vessel, concurrent with visual observations was conducted in the Yangtze River from Wuhan to Poyang Lake in 1998 in China. The peak to peak detection threshold was set at 133 dB re 1 ,EPa. With this threshold level, porpoises could be detected reliably within 300 m of the hydrophone. In a total of 774-km cruise, 588 finless porpoises were sighted by visual observation and 44 ,864 ultrasonic pulses were recorded by the acoustical observation system. The acoustic monitoring system could detect the presence of the finless porpoises 82% of the time. A false alarm in the system occurred with a frequency of 0.9%. The high-frequency acoustical observation is suggested as an effective method for field surveys of small cetaceans, which produce high-frequency sonar signals.     

Nondestructive characterization of musical pillars of Mahamandapam of Vitthala Temple at Hampi, India

This paper presents the first scientific investigation on the musical pillars of the Vitthala Temple at Hampi, India. The solid stone columns in these pillars produce audible sound, when struck with a finger. Systematic investigations on the acoustic characteristics of the musical pillars of mahamandapam (great stage) of the Vitthala Temple have been carried out. The 11 most popular pillars that produce sounds of specific musical instruments are considered for the investigations. The sound produced from these 11 most popular musical pillars was recorded systematically and different nondestructive testing techniques such as low frequency ultrasonic testing, impact echo testing, and in situ metallography were employed on the musical columns of these pillars. The peak frequencies in the amplitude spectrum of the sound produced from various columns in these pillars are correlated with the dimensional measurements and ultrasonic velocity determined using impact echo technique. The peak frequencies obtained experimentally have been found to have excellent correlation with the calculated flexural frequencies based on the dimensional measurements and ultrasonic velocities of the columns.     

Thermo-optical modulation of ultrasonic surface waves for NDE

The well-known thermo-elastic effect of laser irradiation can be exploited to produce strong localized stresses when an expanded, long pulse, low-intensity laser beam is used to irradiate the specimen. These stresses will produce a parametric modulation of the received ultrasonic signals, that is somewhat similar to the acousto-elastic effect often used in nonlinear ultrasonic studies. It is shown in this paper that otherwise hidden small cracks in fatigue-damaged aluminum and titanium specimens can be readily detected by exploiting this optically induced thermo-elastic modulation during ultrasonic surface wave inspection since they are susceptible to crack closure and therefore exhibit strong parametric modulation. The temporal and spatial variations of the ultrasonic signals due to laser irradiation were evaluated numerically and experimentally. Based on these results, the direct temperature modulation of the ultrasonic velocity can be separated from the thermo-elastic stress modulation present only in cracked specimens. It was found that this method can be used to selectively increase the sensitivity of ultrasonic flaw detection to small fatigue cracks by more than one order of magnitude.     

Accurate analysis of multitone signals using a DFT

Optimum data windows make it possible to determine accurately the amplitude, phase, and frequency of one or more tones (sinusoidal components) in a signal. Procedures presented in this paper can be applied to noisy signals, signals having moderate nonstationarity, and tones close in frequency. They are relevant to many areas of acoustics where sounds are quasistationary. Among these are acoustic probes transmitted through media and natural sounds, such as animal vocalization, speech, and music. The paper includes criteria for multitone FFT block design and an example of application to sound transmission in the atmosphere.     

Low frequency narrow-band calls in bottlenose dolphins (Tursiops truncatus): signal properties, function, and conservation implications

Dolphins routinely use sound for social purposes, foraging and navigating. These sounds are most commonly classified as whistles (tonal, frequency modulated, typical frequencies 5-10 kHz) or clicks (impulsed and mostly ultrasonic). However, some low frequency sounds have been documented in several species of dolphins. Low frequency sounds produced by bottlenose dolphins (Tursiops truncatus) were recorded in three locations along the Gulf of Mexico. Sounds were characterized as being tonal with low peak frequencies (mean?=?990 Hz), short duration (mean?=?0.069 s), highly harmonic, and being produced in trains. Sound duration, peak frequency and number of sounds in trains were not significantly different between Mississippi and the two West Florida sites, however, the time interval between sounds within trains in West Florida was significantly shorter than in Mississippi (t?=?-3.001, p?=?0.011). The sounds were significantly correlated with groups engaging in social activity (F=8.323, p=0.005). The peak frequencies of these sounds were below what is normally thought of as the range of good hearing in bottlenose dolphins, and are likely subject to masking by boat noise.     

一种强噪声背景下微弱超声信号提取方法研究

为解决在强噪声背景下获取超声信号的难题,基于粒子群优化算法和稀疏分解理论提出一种强噪声背景下微弱超声信号提取方法.该方法将降噪问题转换为在无穷大参数集上对函数进行优化的问题,首先以稀疏分解理论和超声信号的结构特点为依据构建了粒子群优化算法运行所需要的目标函数及去噪后信号的重构函数,从而将粒子群优化算法和超声信号降噪联系在一起;然后根据粒子群优化算法可以在连续参数空间寻优的特点建立了用于匹配超声信号的连续超完备字典,并采用改进的自适应粒子群优化算法在该字典中对目标函数进行优化;最后根据对目标函数在字典上的优化结果确定最优原子,并利用最优原子按照重构函数重构出降噪后的超声信号.通过对仿真超声信号和实测超声信号的处理,结果表明本文提出的方法可以有效提取信噪比低至-4 dB的强噪声背景下的微弱超声信号,且和基于自适应阈值的小波方法相比本文方法表现出更好的降噪性能.     

Illusory continuity of tonal and infratonal periodic sounds

Temporal induction can restore masked or obliterated portions of signals so that tones may seem continuous when alternated with sounds having appropriate spectral composition and intensity. The upper intensity limits for the induction of tones (pulsation thresholds) are related to masking functions and have been used to define the characteristics of frequency domain (place) analysis of tones. The present study has found that induction also occurs for infratonal periodic sounds that require a time domain analysis for perception of acoustic repetition. Limits for temporal induction were determined for iterated frozen noise segments from 10-2000 Hz alternated with a louder on-line noise. Masked thresholds were also obtained for the pulsed signals presented along with continuous noise, and it was found that the relation between induction limits and masking changed with frequency. The results obtained for induction and masking are discussed in terms of general principles governing restoration of obliterated sounds.     

Electrical coupling effects in an ultrasonic transducer array

Ultrasonic imaging devices often use transducer arrays for sampling the incoming acoustic field and converting it into electrical signals. After some convenient processing (amplification, dephasing, summing, etc), the electrical signals are used to modulate the brightness of a cathode ray tube (crt) monitor on which the ultrasonic image becomes visible. The quality of the imaging apparatus depends critically on the transducer array design and implementation.

Each individual transducer would, ideally, produce an electrical signal related exclusively to the ultrasonic field arriving at its surface; the reciprocal would also be true for transmission. In all practical cases, however, numerous effects lead to some coupling between nearby transducers, especially for very narrow transducers. The subsequent perturbations may be described as a narrowing of the radiation (or reception) pattern of the individual transducers, with respect to the theoretical predictions. To understand the mechanism for these couplings and to minimize them, their possible origins have been systematically studied. One of the most important sources of coupling is electrical leakage, which is reported here. Since no simple analytical calculation can be performed, diagrams have been established that enable evaluation of the electrical coupling against the dimensional characteristics of the array. Some means for reducing this coupling are suggested and comparative experimental results are given.     

Sparse signal representation and its applications in ultrasonic NDE

Many sparse signal representation (SSR) algorithms have been developed in the past decade. The advantages of SSR such as compact representations and super resolution lead to the state of the art performance of SSR for processing ultrasonic non-destructive evaluation (NDE) signals. Choosing a suitable SSR algorithm and designing an appropriate overcomplete dictionary is a key for success. After a brief review of sparse signal representation methods and the design of overcomplete dictionaries, this paper addresses the recent accomplishments of SSR for processing ultrasonic NDE signals. The advantages and limitations of SSR algorithms and various overcomplete dictionaries widely-used in ultrasonic NDE applications are explored in depth. Their performance improvement compared to conventional signal processing methods in many applications such as ultrasonic flaw detection and noise suppression, echo separation and echo estimation, and ultrasonic imaging is investigated. The challenging issues met in practical ultrasonic NDE applications for example the design of a good dictionary are discussed. Representative experimental results are presented for demonstration.     

Modulation detection for amplitude-modulated bone-conducted sounds with sinusoidal carriers in the high- and ultrasonic-frequency range

Ultrasonic vibration generates a sensation of sound via bone-conduction. This phenomenon is called bone-conducted ultrasonic (BCU) hearing. Complex sounds can also be perceived by amplitude-modulating a BCU stimulus (AM-BCU). The influence of the modulation frequency on the sensitivity to detecting amplitude modulation of sinusoidal carriers of 10, 20, and 30 kHz was examined to clarify the characteristics of the perception of amplitude modulation over the sonic or audio-frequency range and the ultrasonic range. In addition, the detection sensitivity for single-sideband modulation for a 20 kHz carrier was measured. Temporal modulation transfer functions (TMTFs) obtained at each carrier frequency suggest that the auditory system has the ability to process timing information in the envelopes of AM-BCUs at lower modulation frequencies, as is the case with audio-frequency sounds. The possible influence of peripheral filtering on the shape of the TMTF at higher frequencies was examined.     

Obtaining acoustic similarity measures from animals: a method for species comparisons

An efficient procedure has been developed for obtaining similarity measures for complex acoustic signals in small birds. Birds were trained using operant conditioning procedures to detect changes in the repeating background of an ongoing sound. Response latencies for detection were used to construct similarity matrices. Multidimensional scaling procedures were then used to produce spatial maps of these complex sounds reflecting perceptual organization. An example using contact calls from two avian species is described.     

Callback response of dugongs to conspecific chirp playbacks

Dugongs (Dugong dugon) produce bird-like calls such as chirps and trills. The vocal responses of dugongs to playbacks of several acoustic stimuli were investigated. Animals were exposed to four different playback stimuli: a recorded chirp from a wild dugong, a synthesized down-sweep sound, a synthesized constant-frequency sound, and silence. Wild dugongs vocalized more frequently after playback of broadcast chirps than that after constant-frequency sounds or silence. The down-sweep sound also elicited more vocal responses than did silence. No significant difference was found between the broadcast chirps and the down-sweep sound. The ratio of wild dugong chirps to all calls and the dominant frequencies of the wild dugong calls were significantly higher during playbacks of broadcast chirps, down-sweep sounds, and constant-frequency sounds than during those of silence. The source level and duration of dugong chirps increased significantly as signaling distance increased. No significant correlation was found between signaling distance and the source level of trills. These results show that dugongs vocalize to playbacks of frequency-modulated signals and suggest that the source level of dugong chirps may be manipulated to compensate for transmission loss between the source and receiver. This study provides the first behavioral observations revealing the function of dugong chirps.     

Linking the sounds of dolphins to their locations and behavior using video and multichannel acoustic recordings

It is difficult to attribute underwater animal sounds to the individuals producing them. This paper presents a system developed to solve this problem for dolphins by linking acoustic locations of the sounds of captive bottlenose dolphins with an overhead video image. A time-delay beamforming algorithm localized dolphin sounds obtained from an array of hydrophones dispersed around a lagoon. The localized positions of vocalizing dolphins were projected onto video images. The performance of the system was measured for artificial calibration signals as well as for dolphin sounds. The performance of the system for calibration signals was analyzed in terms of acoustic localization error, video projection error, and combined acoustic localization and video error. The 95% confidence bounds for these were 1.5, 2.1, and 2.1 m, respectively. Performance of the system was analyzed for three types of dolphin sounds: echolocation clicks, whistles, and burst-pulsed sounds. The mean errors for these were 0.8, 1.3, and 1.3 m, respectively. The 95% confidence bound for all vocalizations was 2.8 m, roughly the length of an adult bottlenose dolphin. This system represents a significant advance for studying the function of vocalizations of marine animals in relation to their context, as the sounds can be identified to the vocalizing dolphin and linked to its concurrent behavior.     

Wavelet based noise suppression technique and its application to ultrasonic flaw detection

The noise suppression techniques with wavelet transform (WT) are widely used in non-destructive testing and evaluation (NDT&E), especially in ultrasonics. Complete reconstruction theory with hard or soft thresholds, reconstruction technique based on the singularities of noise and signal, matched filter with an impulse response, and optimal frequency-to-bandwidth ratio of wavelet technique have all been used to analyze ultrasonic signals for noise suppression. But a more simple and effective technique has been pursued for decades. This paper develops a new technique using WT for the right purpose. In this work, WT is treated as a band-pass filter whose central frequency and frequency bandwidth (CF&FB) are determined by the spectra distribution of an ultrasonic signal captured from real testing situation. For the purpose of matching their CF&FB well, a technique for evaluating the optimal scale of a daughter wavelet is carried out too. By acting this daughter wavelet as a band-pass filter, we can obtain excellent de-noising results, even when the signal to noise ratio (SNR) is below -18 dB. The performance of the technique has been done by ultrasonic signals with computer generated white noises. Finally, the experimental verification is performed on a pipeline specimen with man-made small flaws with good results obtained. The results show that the technique is more suitable for processing heavy noised ultrasonic signals, and it can also be used in automatic flaw detection.     

Specific features of vowel-like signals of white whales

The set of acoustic signals of White-Sea white whales comprises about 70 types of signals. Six of them occur most often and constitute 75% of the total number of signals produced by these animals. According to behavioral reactions, white whales distinguish each other by acoustic signals, which is also typical of other animal species and humans. To investigate this phenomenon, signals perceived as vowel-like sounds of speech, including sounds perceived as a “bleat,” were chosen A sample of 480 signals recorded in June and July, 2000, in the White Sea within a reproductive assemblage of white whales near the Large Solovetskii Island was studied. Signals were recorded on a digital data carrier (a SONY minidisk) in the frequency range of 0.06–20 kHz. The purpose of the study was to reveal the perceptive and acoustic features specific to individual animals. The study was carried out using the methods of structural analysis of vocal speech that are employed in lingual criminalistics to identify a speaking person. It was demonstrated that this approach allows one to group the signals by coincident perceptive and acoustic parameters with assigning individual attributes to single parameters. This provided an opportunity to separate conditionally about 40 different sources of acoustic signals according to the totality of coincidences, which corresponded to the number of white whales observed visually. Thus, the application of this method proves to be very promising for the acoustic identification of white whales and other marine mammals, this possibility being very important for biology.     

A framework for the automated real-time detection of short tonal sounds from ocean observatories

Acquisition of acoustic data from ocean observatories is expected to play a key role for the long-term monitoring of marine mammals and anthropogenic noise. It typically requires processing of a large volume of acoustic data and it must rely on automated identification of signals. We present an algorithmic framework for the detection of short tonal sounds (e.g. cetacean calls, anthropogenic pings) intended to act as a first stage in a system for the automated real-time detection, classification, and localisation of acoustic sources. The algorithm was validated under a diversity of scenarios expected at ocean observatories. Using simulated signals that emulate a variety of cetacean call-types, perfect identification of signal position was obtained for signal to noise ratios of ?15 to ?5 dB, depending on the signal-type. Separation of real-world data segments with short tonal sounds (mainly cetacean calls) from segments with other sounds or noise resulted in Area Under the ROC Curve values between 0.96 and 0.98. The algorithm can be used to automatically identify cetacean calls and anthropogenic short tonal sounds much faster than in real-time, thereby reducing the burden put on data transmission, storage, or processing by classification and localisation algorithms.     

收发分置目标强度的计算及前向散射信号的分离

研究时域有限差分(FDTD)法计算收发分置弹性目标散射声场的有效性,和实验测量中从直达与散射干涉信号中分离目标前向散射信号的方法。将FDTD法应用于三维声场计算,分别计算了平顶圆柱、球顶圆柱、球锥顶圆柱和扁长回转椭球等几种不同形状的弹性体散射近场空间分布,再用近远场变换方法获取远场目标强度空间分布。模拟结果表明:目标强度的空间指向性是受声波入射方向、无量纲波数kL(k-波数,L-目标特征尺度)、目标形状、材料等影响;在本文所计算的几种不同形状目标的尺度和kL取值范围内,计算得到的收发分置目标强度空间分布均有显著的前向散射与镜反射特征。计算结果得到解析解和实验结果的印证,从而表明了FDTD法计算收发分置目标散射场的有效性。对接收信号采用相关处理方法,能有效地分离出目标前向散射信号,表明对于收发分置目标散射声强的测量,这是一种简单有效的分离目标前向散射信号的方法。