Synthesis of snowman‐like polymer‐silica asymmetric particles by combination of hydrolytic condensation process with γ‐ray radiation initiated seeded emulsion polymerization

We report on a facile route to synthesize snowman‐like asymmetric composite particles via γ‐ray initiated seeded emulsion polymerization after a hydrolytic condensation process on the surface of second monomer swollen poly(styrene‐divinylbenzene‐acrylic acid) seeds. Effects of the amounts and kinds of second monomer and inorganic precursor, different radiation polymerization conditions including dose rates and absorbed doses on the morphology of the obtained particles were investigated. The obtained asymmetric particles can serve as ideal solid surfactants to stabilize the water‐in‐oil emulsions, and soap‐free hierarchical materials were obtained by polymerization of monomers in water or oil phase. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 339–348     

Synthesis of the raspberry‐like PS/PAN particles with anisotropic properties via seeded emulsion polymerization initiated by γ‐ray radiation

We herein report a facile method to prepare the submicron‐sized raspberry‐like polystyrene/polyacrylonitrile particles with anisotropic properties and controllable structure via γ‐radiation‐induced seeded emulsion polymerization under ambient pressure and at room temperature, in which the monodisperse crosslinked styrene‐divinylbenzene‐acrylic acid terpolymer (P(S‐DVB‐AA)) particles were used as seed particles and acrylonitrile (AN) as the second monomer. The influence of the weight ratio of polymer/monomer, the absorbed dose rate, the absorbed dose, and the dispersion medium on the morphology of the as‐prepared particles was investigated. The final products were thoroughly characterized by Fourier transform infrared spectroscopy (FTIR), field‐emission scanning electron microscopy, and transmission electron microscopy. The results showed that the raspberry‐like particles could be fabricated in high yield. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of SiO2/poly(styrene‐co‐butyl acrylate) nanocomposite microspheres via miniemulsion polymerization

A series of SiO₂/poly(styrene‐co‐butyl acrylate) nanocomposite microspheres with various morphologies (e.g., multicore–shell, normal core–shell, and raspberry‐like) were synthesized via miniemulsion polymerization. The results showed that the morphology of the composite latex particles was strongly influenced by the presence or absence of the soft monomer (butyl acrylate), the particle sizes of the silica, and the emulsifier concentrations. The incorporation of the soft monomer helped in forming the multicore–shell structure. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3202–3209, 2006     

Particle formation under monomer‐starved conditions in the semibatch emulsion polymerization of styrene. I. Experimental

Particle formation and particle growth compete in the course of an emulsion polymerization reaction. Any variation in the rate of particle growth, therefore, will result in an opposite effect on the rate of particle formation. The particle formation in a semibatch emulsion polymerization of styrene under monomer‐starved conditions was studied. The semibatch emulsion polymerization reactions were started by the monomer being fed at a low rate to a reaction vessel containing deionized water, an emulsifier, and an initiator. The number of polymer particles increased with a decreasing monomer feed rate. A much larger number of particles (within 1–2 orders of magnitude) than that generally expected from a conventional batch emulsion polymerization was obtained. The results showed a higher dependence of the number of polymer particles on the emulsifier and initiator concentrations compared with that for a batch emulsion polymerization. The size distribution of the particles was characterized by a positive skewness due to the declining rate of the growth of particles during the nucleation stage. A routine for monomer partitioning among the polymer phase, the aqueous phase, and micelles was developed. The results showed that particle formation most likely occurred under monomer‐starved conditions. A small average radical number was obtained because of the formation of a large number of polymer particles, so the kinetics of the system could be explained by a zero–one system. The particle size distribution of the latexes broadened with time as a result of stochastic broadening associated with zero–one systems. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3940–3952, 2001     

Poly(2‐hydroxyethyl methacrylate‐co‐N,O‐dimethacryloylhydroxylamine) particles by dispersion polymerization

Poly(2‐hydroxyethyl methacrylate‐co‐N,O‐dimethacryloylhydroxylamine) particles were prepared by dispersion polymerization in toluene/2‐methylpropan‐1‐ol medium using cellulose acetate butyrate and dibenzoyl peroxide (BPO) as a steric stabilizer and initiator, respectively. The particle size was reduced with decreasing solvency of the reaction medium (more nuclei were generated) because the critical chain length of the precipitated oligomers decreased with an increasing toluene content, which is a poorer solvent for the polymer than 2‐methylpropan‐1‐ol. There is an optimum initiator concentration (2 wt % BPO relative to monomers) for producing low‐polydispersity particles under given conditions. Additionally, discrete spherical particles were obtained at a low monomer concentration and/or higher polymerization temperature. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1625–1632, 2002     

Durable and refreshable polymeric N‐halamine biocides containing 3‐(4′‐vinylbenzyl)‐5,5‐dimethylhydantoin

A novel vinyl‐hydantoin monomer, 3‐(4′‐vinylbenzyl)‐5,5‐dimethylhydantoin, was synthesized in a good yield and was fully characterized with Fourier transform infrared (FTIR) and ¹H NMR spectra. Its homopolymer and copolymers with several common acrylic and vinyl monomers, such as vinyl acetate, acrylonitrile, and methyl methacrylate, were readily prepared under mild conditions. The polymers were characterized with FTIR and ¹H NMR, and their thermal properties were analyzed with differential scanning calorimetry studies. The halogenated products of the corresponding copolymers exhibited potent antibacterial properties against Escherichia coli, and the antibacterial properties were durable and regenerable. The structure–property relationships of the polymers were further discussed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3348–3355, 2001     

Synthesis of amino‐functionalized latex particles by a multistep method

Cationic latex particles with surface amino groups were prepared by a multistep batch emulsion polymerization. In the first one or two steps, monodisperse cationic latex particles to be used as the seed were synthesized, and in the third step, two different amino‐functionalized monomers [aminoethylmethacrylate hydrochloride (AEMH) and vinylbenzylamine hydrochloride (VBAH)] were used to synthesize the final functionalized latex particles. 2,2′‐Azobisisobutyramidine dihydrochloride was used as the initiator, and different concentrations of two quaternary ammonium emulsifiers with hydrophobic chains of different lengths were examined. To characterize the final latexes yields were obtained gravimetrically, and particle size distributions and average particle diameters were determined by transmission electron microscopy and photon correlation spectroscopy. The amount of amino groups was determined by fluorimetry. The effect of the amino‐functional monomer used on the final latexes and the colloidal behavior of the system were studied. The influence of the different conditions utilized to synthesize the latexes on the colloidal stability of the particles was evaluated in terms of the Fuchs stability ratio and electrophoretic mobility. High yields of the amino‐functional monomers were obtained. Surface amino, amidine, and quaternary ammonium groups provided the cationic character. The colloidal stability behavior of the products obtained was compatible with their cationic character. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2929–2936, 2001     

Synthesis and characterization of micrometer‐sized particles of narrow size distribution with chloromethyl functionality on the basis of single‐step swelling of uniform polystyrene template microspheres

Polystyrene template microspheres of 1.4 ± 0.1 μm were prepared by dispersion polymerization of styrene in a mixture of ethanol and 2‐methoxy ethanol. These template particles were then swelled at room temperature in a single step with emulsion that was prepared in sodium dodecyl sulfate aqueous solution from a swelling solvent (dibutyl phthalate) containing the initiator (benzoyl peroxide) and monomer(s) (chlormethylstyrene, divinylbenzene, or ethylene dimethacrylate). Composite uniform particles composed of the template polystyrene and noncrosslinked or crosslinked polychloromethylstyrene were prepared by polymerizing the monomer(s) within the swelled particles at 73 °C. Crosslinked uniform polychloromethylstyrene particles of higher surface area were formed by dissolving the template polystyrene polymer of the composite particles. The influence of various reaction parameters, such as dibuthyl phthalate concentration, chloromethylstyrene concentration, crosslinker type and concentration, and so forth on the molecular weight, size, size distribution, shape, morphology, surface area, and decomposition temperature of the particles was investigated. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1342–1352, 2002     

Synthesis and characterization of aromatic cyclolinear phosphazene polyetherketones containing bis‐Spiro‐substituted cyclotriphosphazene unit

A novel monomer, 2,2‐bis‐(4′‐fluorobenzoylphenoxy)‐4,4,6,6‐bis[spiro‐(2′,2″‐dioxy‐1′, 1′‐biphenylyl)] cyclotriphosphazene, was synthesized and polymerized with 4,4′‐difluorobenzophenone as a comonomer and 4,4′‐isopropylidenediphenol or 4,4′‐(hexafluoroisopropylidene) diphenol in N,N‐dimethylacetamide at 162 °C for 4 h to give two series of aromatic cyclolinear phosphazene polyetherketones containing bis‐spiro‐substituted cyclotriphosphazene groups. The structure of the monomer was confirmed by ¹H, ¹³C, and ³¹P NMR. The effect of the incorporation of the bis‐spiro‐substituted cyclotriphosphazene group on the thermal properties of these polymers was investigated by DSC and thermogravimetric analysis. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2993–2997, 2001     

Supermicron polymer particles with core‐shell type morphologies

Polymer particles with controlled morphologies and having diameters from about 1–20 μ can be prepared using a new suspension polymerization‐based procedure. In contrast to existing procedures using emulsion polymerization, this process allows efficient preparation of supermicron particles that can be easily isolated as a dry powder. Control of the particle morphology is obtained by manipulating the monomer conversion at the beginning of the second stage of the reaction (when the second monomer is added). Two systems are studied. The first system uses styrene added to a partially polymerized MMA host particle, whereas the second system uses styrene added to a partially polymerized 45 wt % styrene to 55 wt % butyl methacrylate host particle. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 345–351, 2000     

One‐pot synthesis of organic–inorganic hybrid polyhedral oligomeric silsesquioxane microparticles in a double‐zone temperature controlled microfluidic reactor

Polyhedral oligomeric silsesquioxane (POSS) particles are one of the smallest organosilica nano‐cage structures with high multifunctionality that show both organic and inorganic properties. Until now poly(POSS) structures have been synthesized from beginning with a methacryl‐POSS monomer in free‐radical mechanism with batch‐wise methods that use sacrificial templates or additional multisteps. This study introduces a novel one‐pot synthesis inside a continuous flow, double temperature zone microfluidic reactor where the methodology is based on dispersion polymerization. As a result, spherical monodisperse POSS microparticles were obtained and characterized to determine their morphology, surface chemical structure, and thermal behavior by SEM, FTIR, and TGA, respectively. These results were also compared and reported with the outcomes of batch‐wise synthesis. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1396–1403     

Novel refreshable N‐halamine polymeric biocides containing imidazolidin‐4‐one derivatives

A novel cyclic‐amine monomer, 1‐acryloyl‐2,2,5,5‐tetramethylimidazolidin‐4‐one (ACTMIO), was synthesized in a good yield through the reaction of acryloyl chloride with 2,2,5,5‐tetramethylimidazolidin‐4‐one and was fully characterized with Fourier transform infrared and ¹H NMR studies. ACTMIO was copolymerized with several widely used acrylic and vinyl monomers under ordinary conditions. In the presence of triallyl‐1,3,5‐triazine‐2,4,6(1H,3H,5H)‐trione, ACTMIO was easily grafted onto most textile fabrics. After regular chlorine bleach treatment, N‐halamine derivatives of the corresponding polymeric materials exhibited antibacterial properties against Escherichia coli, and these properties were durable and refreshable with chlorine bleaching. The relationship between the structures and antibacterial properties of the samples is further discussed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3073–3084, 2001     

Melt‐flow‐induced phase morphologies of a high‐density polyethylene/poly(ethylene‐co‐1‐octene) blend

A blend of high‐density polyethylene and an elastomeric poly(ethylene‐co‐1‐octene) resin, containing 25 mol % octene and long‐chain branching, was phase‐separated in the melt under quiescent conditions. After melt flow, the blend had fine globular or interconnected phase morphologies that were interpreted as originating from the various stages of coarsening after liquid–liquid phase separation through spinodal decomposition. It was inferred that the miscibility of the blend was enhanced under melt flow. After cessation of flow, concurrent liquid–liquid and solid–liquid phase separation took place, resulting in the formation of an interpenetrating morphology comprising amorphous polyethylene, copolymer, and crystalline polyethylene. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 380–389, 2001     

New morphological control for thick,porous membranes with a plasma graft‐filling polymerization

Morphological control of membranes with plasma graft‐filling polymerization was proposed for thick, porous membranes. The morphology depended closely on the plasma within the membrane pore, which was determined by the plasma‐discharge power (PDP) and the gas pressure. The membrane morphology was investigated in terms of solvent composition in monomer solution, PDP, Ar pressure, and pore size of a substrate. Morphologies of membranes prepared were evaluated by a microscopic Fourier transform infrared mapping method. This study demonstrates that it is possible to control the membrane morphology by manipulating the plasma power and Ar pressure instead of morphological control by solvent‐dependent monomer activity. Additionally, through indirect methods this study reveals that plasma exists even in sub‐micropores (ca. 0.4 μm in diameter). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1216–1224, 2003     

Synthesis of TiO2–SiO2/polymer core–shell microspheres with a microphase‐inversion method

A novel microphase‐inversion method was proposed for the preparation of TiO₂–SiO₂/poly(methyl methacrylate) core–shell nanocomposite particles. The inorganic–polymer nanocomposites were first synthesized via a free‐radical copolymerization in a tetrahydrofuran solution, and the poor solvent was added slowly to induce the microphase separation of the nanocomposite and result in the formation of nanoparticles. The average particle sizes of the microspheres ranged from 70 to 1000 nm, depending on the reaction conditions. Transmission electron microscopy and scanning electron microscopy indicated a core–shell morphology for the obtained microspheres. Thermogravimetric analysis and X‐ray photoelectron spectroscopy measurements confirmed that the surface of the nanocomposite microspheres was polymer‐rich, and this was consistent with the core–shell morphology. The influence of the synthetic conditions, such as the inorganic composition and the content of the crosslinking monomer, on the particle properties was studied in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3911–3920, 2006     

Synthesis and characterization of nonaqueous dispersion particles with photolabile α‐heptadecylphenacyl ester stabilizer chains

We describe a new method for the synthesis of core–shell photolabile nanoparticles. The synthesis begins with the batch emulsion copolymerization of n‐butyl methacrylate (BMA) and ethylene glycol dimethacrylate to form small (20‐nm‐diameter) crosslinked particles with a narrow size distribution. These seeds are then used for a second‐stage emulsion copolymerizations in which BMA and various polar monomers, including methacrylic acid, are added under monomer‐starved conditions. After characterization of the particles, they are transferred to an N,N‐dimethylformamide solution. The cesium salt of the carboxylic acid groups is reacted with 2‐bromo‐1‐phenyl‐octadecan‐1‐one to convert various fractions of the ? COOH groups to the corresponding 2‐benzoylheptadecyl ester groups. These aliphatic ester groups render the surface sufficiently hydrophobic that the particles can be dispersed in common aliphatic hydrocarbons solvents to yield colloidal dispersions, sterically stabilized by the dangling aliphatic chains. Ester groups with a phenyl ketone attached to the β‐carbon are photolabile. Irradiation of the particles with UV light detaches the sterically stabilizing chains from the particle and transforms the surface groups back to COOH groups. This leads to flocculation of the particles. The emphasis in this article is on the optimization of the particle synthesis and the characterization of the particles obtained. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2642–2657, 2001     

Synthesis of high molecular weight trans‐poly(9,9‐di‐n‐octylfluorene‐2,7‐vinylene) by the acyclic diene metathesis polymerization using molybdenum catalysts

High molecular weight trans‐poly(9,9‐di‐n‐octylfluorene‐2,7‐vinylene) was prepared under reduced pressure in the presence of a well‐defined Schrock‐type catalyst, Mo(CHCMe₂Ph)(N‐2,6‐Me₂C₆H₃)[OCMe(CF₃)₂]₂, in toluene. The effect of initial monomer concentration was found to be an important factor for preparing high molecular weight polymers with unimodal molecular weight distributions. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2463–2470, 2001     

Visible and long‐wavelength photoinitiated cationic polymerization

A new system for efficiently carrying out cationic photopolymerizations with visible and long‐wavelength UV light is described. This system is based on the principle that certain onium salt cationic photoinitiators can be reduced by free radicals produced by the hydrogen abstraction reactions of photoexcited ketones. Thus, when camphorquinone, benzil, 2‐isopropylthioxanthone, and 2‐ethylanthraquinone are irradiated in the presence of a monomer that can serve as a hydrogen donor, the resulting monomer‐bound radical rapidly reduces a diaryliodonium salt or a dialkylphenacylsulfonium salt, and the resulting monomer‐centered cations initiate the polymerizations of epoxides, vinyl ethers, and heterocyclic compounds. Onium salts with high reduction potentials, such as triarylsulfonium salts, do not undergo sensitization by this new system. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 343–356, 2001     

Nonaqueous dispersion polymerization of styrene in methanol with the ionomer block copolymer poly[(4‐methylstyrene)‐co‐(4‐vinyltriethylbenzyl ammonium bromide)]‐b‐polyisobutene as a stabilizer

The nonaqueous dispersion polymerization of styrene in methanol with poly[(4‐methylstyrene)‐co‐(4‐vinyltriethylbenzyl ammonium bromide)]‐b‐polyisobutene as a stabilizer was investigated. There was no observable inducing period or autoacceleration in the polymerization process. The conversion increased almost linearly with the polymerization time as high as 80%. The average sizes of the obtained polystyrene particles increased, and the size distributions of the polystyrene particles tended to become narrower, with increasing conversion. The mechanism of the dispersion polymerization in the presence of polyisobutene‐b‐poly[(4‐methylstyrene)‐co‐(4‐vinyltriethylbenzyl ammonium bromide)] was nucleation/growth. When the stabilizer/monomer ratio (w/w) was greater than 2.0%, the polystyrene dispersion was stable, and there was no observable polymer particle coagulation taking place during the whole polymerization process. The average diameter of the polymer particles can be mediated through changes in the polymerization conversion, monomer, and stabilizer. Nearly monodispersed polystyrene particles with average diameters of approximately 0.45–2.21 μm were obtained under optimal conditions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2678–2685, 2004     

Polycarbonate particles and dye‐labeled particles by miniemulsion polymerization

We describe the synthesis of several different polycarbonate particles by miniemulsion polymerization. The monomers were allylmethyl carbonate (AlMeC), di(ethylene glycol) bisallylcarbonate (DBAC), and 4‐vinyl‐1,3‐dioxan‐2‐one [vinyl ethylene carbonate (VEC)]. For these polymerizations, higher monomer conversions were obtained with oil‐soluble initiators (azobisisobutyronitrile and benzoyl peroxide) than with a water‐soluble initiator (potassium persulfate). Benzoyl peroxide was particularly effective in yielding particles with a narrow size distribution. Although increasing amounts of a surfactant (sodium dodecyl sulfate) led to smaller particles, the choice of the monomer was the major determinant. For example, in polymerization reactions carried out at 85 °C with benzoyl peroxide as the initiator and with otherwise identical recipes, we obtained particle sizes of 181 nm with AlMeC, 296 nm with VEC, and 203 nm with DBAC. Fluorescent particles were synthesized with comonomers based on the benzothioxanthene nucleus. Because the dyes had poor solubility in the monomers, it was necessary to include typically 20 wt % bromobenzene or dichlorobenzene based on the monomer in the miniemulsion reaction mixture. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1999–2009, 2004