Synthesis and photochemical reaction of cyclic oligomers: Synthesis and photopolymerization of novel C‐methylcalix[4]resorcinarene and p‐alkylcalix[n]arene derivatives containing spiro ortho ether groups

New photoreactive calixarene derivatives containing spiro ortho ester groups (calixarenes 3a–3c ) were synthesized by the reaction of 2‐bromomethyl‐1,4,6‐trioxaspiro[4.4]nonane with 2,8,14,20‐tetramethyl‐4,6,10,12,16,18,22,24‐octakis(carboxymethoxy)calix[4]resorcinarene, 5,11,17,23,29,35‐hexamethyl‐37,38,39,40,41,42‐hexakis(carboxymethoxy)calix[6]arene, and 5,11,17,23,29,35,41,47‐octa‐tert‐butyl‐49,50,51,52, 53,54,55,56‐octakis‐(carboxymethoxy)calix[8]arene, which were prepared by the reaction of C‐methylcalix[4]resorcinarene, p‐methylcalix[6]arene, and p‐tert‐butylcalix[8]arene, respectively. The thermal stability of the obtained calixarene derivatives containing spiro ortho ester groups was examined with thermogravimetric analysis, and it was found that these calixarene derivatives had good thermal stability. The photoinitiated cationic polymerization of spiro ortho ester groups in calixarene derivatives 3a–3c was examined with certain photoacid generators in the film state. Interestingly enough, the reaction of calixarene derivatives did not proceed with only photoirradiation; however, the reaction proceeded smoothly when the photoirradiation was followed by heating. Furthermore, calixarene 3a , composed of a C‐methylcalix[4]resorcinarene structure, showed the highest photochemical reactivity in this reaction system. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1293–1302, 2002     

Synthesis and photoinduced deprotection of calixarene derivatives containing certain protective groups

Calixarene derivatives 1a , 1b , and 1c containing pendant tert‐butoxycarbonyl (t‐BOC) groups were synthesized in 81, 93, and 83% yields, respectively, by the reaction of C‐methylcalix[4]resorcinarene (CRA), p‐methylcalix[6]arene (MCA), and p‐tert‐butylcalix[8]arene (BCA) with di‐tert‐butyl dicarbonate using triethylamine as a base in pyridine. Calixarene derivatives 2a , 2b , and 2c containing pendant trimethylsilyl ether (TMSE) groups were obtained in 58, 50, and 82% yields, respectively, by the reaction of CRA, MCA, and BCA with 1,1,1,3,3,3‐hexamethyldisilazane using chlorotrimethylsilane as an accelerator in tetrahydrofuran. Calixarene derivatives 3a , 3b , and 3c containing pendant cyclohexenyl ether (CHE) groups were also prepared in 65, 78, and 84% yields, respectively, by the reaction of CRA, MCA, and BCA with 3‐bromocyclohexene using potassium hydroxide as a base as well as tetrabutylammonium bromide as a phase‐transfer catalyst in N‐methyl‐2‐pyrolidone. The photoinduced deprotection of calixarene derivatives 1a – c was examined with bis‐[4‐(diphenylsulfonio)phenyl]sulfide bis(hexafluorophosphate) as a photoacid generator on UV irradiation followed by heating in the film state, and it was found that the deprotection of the t‐BOC groups of 1a proceeded smoothly in high conversion. The deprotection rates of the t‐BOC groups of 1b and 1c were much lower than that of 1a under the same irradiation conditions. The photoinduced deprotection of calixarenes 2b – c containing tetramethylsilane groups as well as 3a – c containing CHE groups were also examined under similar reaction conditions in the film state, and it was found that the deprotection rates of calixarenes 2b – c and 3a – c were lower than those of the corresponding 1a – c calixarenes. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1481–1494, 2001     

Synthesis and photochemical reaction of novel p-alkylcalix[n]arene derivatives containing cationically polymerizable groups

New photoreactive p-methylcalix[6]arene (MCA) derivatives containing cationically polymerizable groups such as propargyl ether (calixarene 1), allyl ether (calixarene 2), and ethoxy vinyl ether (calixarene 3) groups were synthesized with 80, 74, and 84% yields by the substitution reaction of MCA with propargyl bromide, allyl bromide, and 2-chloroethyl vinyl ether (CEVE), respectively, in the presence of either potassium hydroxide or sodium hydride by using tetrabutylammonium bromide (TBAB) as a phase transfer catalyst (PTC). The p-tert-butylcalix[8]arene (BCA) derivative containing ethoxy vinyl ether groups (calixarene 4) was also synthesized in 83% yield by the substitution reaction of BCA with CEVE by using sodium hydride as a base and TBAB as a PTC. The MCA derivative containing 1-propenyl ether groups (calixarene 5) was synthesized in 80% yield by the isomerization of calixarene 2, which contained allyl ether groups, by using potassium tert-buthoxide as a catalyst. The photochemical reactions of carixarene 1, 3, 4, 5, and 6 were examined with certain photoacid generators in the film state. In this reaction system, calixarene 3 containing ethoxy vinyl ether groups showed the highest photochemical reactivity when bis-[4-(diphenylsulfonio)phenyl]sulfide bis(hexafluorophosphate) (DPSP) was used as the catalyst. On the other hand, calixarene 1 containing propargyl ether groups had the highest photochemical reactivity when 4-morpholino-2,5-dibuthoxybenzenediazonium hexafluorophosphate (MDBZ) was used as the catalyst. It was also found that the prepared carixarene derivatives containing cationically polymerizable groups such as propargyl, allyl, vinyl, and also 1-propenyl ethers have good thermal stability. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1805–1814, 1999     

Synthesis of polyesters with pendant oxetane groups by the chemoselective alternating copolymerization of 3‐ethyl‐3‐(glycidyloxymethyl)oxetane with carboxylic anhydride and its photochemical reaction

The synthesis of polyesters with pendant oxetane groups by the chemoselective alternating copolymerization of 3‐ethyl‐3‐(glycidyloxymethyl)oxetane (EGMO) with carboxylic anhydride and the photochemical reaction of the resulting polymer was examined. The alternating copolymerization of EGMO with phthalic anhydride proceeded chemoselectively with quaternary onium salts under appropriate reaction conditions, and the corresponding soluble polymers with pendant oxetane groups with number‐average molecular weights of 4700–7200 were obtained in 72–87% yields. Furthermore, the photochemical reaction of the resulting polymers was examined with certain photoacid generators in the film state upon UV irradiation, and it was found that the photocrosslinking reaction of the pendant oxetane groups proceeded smoothly to give the insoluble polymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1952–1961, 2003     

Synthesis of polyethers with unsymmetrical structures by the polyaddition of 3‐ethyl‐3‐(glycidyloxymethyl)oxetane with diacyl chlorides

Polyethers with unsymmetrical structures in the main chains and pendant chloromethyl groups were synthesized by the polyaddition of 3‐ethyl‐3‐(glycidyloxymethyl)oxetane (EGMO) with certain diacyl chlorides with quaternary onium salts or pyridine as catalysts. The unsymmetrical polyaddition of EGMO containing two different cyclic ether moieties such as oxirane and oxetane groups with terephthaloyl chloride proceeded smoothly in toluene at 90 °C for 6 h to give polymer 1 with a number‐average molecular weight (M_n) of 51,700 in a 93% yield when tetrabutylammonium bromide (TBAB) was used as a catalyst. The polyaddition also proceeded smoothly under the same conditions when other quaternary onium salts, such as tetrabutylammonium chloride, tetrabutylammonium iodide, tetrabutylphosphonium chloride, and tetrabutylphosphonium bromide, and pyridine were used as catalysts. However, without a catalyst no reaction occurred under the same reaction conditions. Polyadditions of EGMO with isophthaloyl chloride and adipoyl chloride gave polymer 2 (M_n = 28,700) and polymer 3 (M_n = 25,400) in 99 and 65% yields, respectively, under the same conditions. The chemical modification of the resulting polymer, polymer 1 , which contained reactive pendant chloromethyl groups, was also attempted with potassium 3‐phenyl‐2,5‐norbornadiene‐2‐carboxylate with TBAB as a phase‐transfer catalyst, and a polymer with 65 mol % pendant norbornadiene moieties was obtained. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 368–375, 2001     

Synthesis of new uracil non‐nucleoside derivatives as potential inhibitors of HIV‐1

6‐(2‐Phenylethyl) and 6‐cyclohexyl 5‐cyanouracils ( 1a,b ) were synthesized and reacted with chloromethyl ethyl ether, benzyl chloromethyl ether, chloromethyl methyl sulfide and (2‐acetoxyethoxy)methyl bromide. New uracil analogues of (S)‐DHPA were synthesized by reaction of compounds ( 1a,b ) with ((S)‐2,2‐dimethyl‐1,3‐dioxolane‐4‐yl) alkyl p‐toluenesulfonate.     

Cascade hole transport in efficient green phosphorescent light‐emitting devices achieved by layer‐by‐layer solution deposition using photocrosslinkable‐conjugated polymers containing oxetane side‐chain moieties

A hole‐injection/transport bilayer structure on an indium tin oxide (ITO) layer was fabricated using two photocrosslinkable polymers with different molecular energy levels. Two photoreactive polymers were synthesized using 2,7‐(or 3,6‐)‐dibromo‐9‐(6‐((3‐methyloxetan‐3‐yl)methoxy)hexyl)‐9H‐carbazole) and 2,4‐dimethyl‐N,N‐bis(4‐ (4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)phenyl)aniline via a Suzuki coupling reaction. When the oxetane groups were photopolymerized in the presence of a cationic photoinitiator, the photocured film showed good solvent resistance and compatibility with a poly(N‐vinylcarbazole) (PVK)‐based emitting layer. Without the use of a conventional hole injection layer (HIL) of poly(3,4‐ethylenedioxythiophene)/(polystyrenesulfonate) (PEDOT:PSS), the resulting green light‐emitting device bearing PVK: 5‐4‐tert‐butylphenyl‐1,3,4‐oxadiazole (PBD):Ir(Cz‐ppy)3 exhibited a maximum external quantum efficiency of 9.69%; this corresponds to a luminous efficiency of 29.57 cd/A for the device K‐4 configuration ITO/POx‐I/POx‐II/PVK:PBD:Ir(Cz‐ppy)3/triazole/Alq3/LiF/Al. These values are much higher than those of PLEDs using conventional PEDOT:PSS as a single HIL. The significant improvement in device efficiency is the result of suppression of the hole injection/transport properties through double‐layered photocrosslinked‐conjugated polymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Novel 9,9′‐(1,3‐phenylene)bis‐9H‐carbazole‐containing copolymers as hole‐transporting and host materials for blue phosphorescent polymer light‐emitting diodes

Novel photo‐crosslinkable hole‐transport and host materials incorporated into multilayer blue phosphorescent polymer light‐emitting diodes (Ph‐PLEDs) were demonstrated in this study. The oxetane‐containing copolymers, which function as hole‐transport layers (HTL), could be cured by UV irradiation in the presence of a cationic photoinitiator. The composition of the two monomers was varied to yield three different hole‐transporting copolymers, [Poly(9,9′‐(5‐(((4‐(7‐(4‐(((3‐methyloxetan‐3‐yl)methoxy)methyl)phenyl)octan‐3‐yl)benzyl)oxy)methyl)?1,3‐phenylene)bis(9H‐carbazole)) ( P(mCP‐Ox)‐I , ‐II , and ‐III )]. In addition, monomer 1 was copolymerized with styrene to produce copolymer P(mCP‐Ph) as a host material for bis[2‐(4,6‐difluorophenyl)pyridinato‐C²,N](picolinato)iridium(III) (FIrpic), a blue‐emitting dopant. All mCP‐based copolymers displayed high glass transition temperatures (T_g) of up to 130–140 °C and triplet energies of up to 3.00 eV. The blue Ph‐PLEDs exhibited a maximum external quantum efficiency of 2.55%, in addition to a luminous efficiency of 8.75 cd A^?1 when using the device configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate)/ P(mCP‐OX)‐III / P(mCP‐Ph) :FIrpic(15 wt %)/3,3′‐[5′‐[3‐(3‐pyridinyl)phenyl][1,1′:3′,1′′‐terphenyl]‐3,3′′‐diyl]bispyridine/LiF/Al. The device bearing P(mCP‐Ox)‐III HTL, containing the highest composition of mCP unit, exhibited better performance than the other devices, which is attributed to induction of more balanced charge carriers and carrier recombination in the emissive layer. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 707–718     

Synthesis and chemical modification of hyperbranched polyethers with terminal hydroxy groups by the anionic ring‐opening polymerization of 3‐alkyl‐3‐hydroxymethyl oxetanes

The anionic ring‐opening polymerization of oxetanes containing hydroxyl groups was carried out with potassium tert‐butoxide as an initiator in the presence of 18‐crown‐6‐ether in N‐methylpyrrolidinone at 180 °C; it yielded corresponding multifunctional hyperbranched polymers: poly(3‐ethyl‐3‐hydroxymethyloxetane)s, with number‐average molecular weights of 2200–4100 in 83–95% yields, and poly(3‐methyl‐3‐hydroxymethyloxetane)s, with number‐average molecular weights of 4600–5200 in 70–95% yields. The synthesized poly(3‐ethyl‐3‐hydroxymethyloxetane)s and poly(3‐methyl‐3‐hydroxymethyloxetane)s were hyperbranched polyethers containing an oxetane moiety and many hydroxy groups at the ends. The postpolymerization of poly(3‐ethyl‐3‐hydroxymethyloxetane)s was performed in the presence of potassium tert‐butoxide and 18‐crown‐6‐ether in N‐methylpyrrolidinone at 180 °C; it yielded corresponding polymers with higher molecular weights in good yields. The cationic polymerization of poly(3‐ethyl‐3‐hydroxymethyloxetane) derivatives was carried out with boron trifluoride etherate as an initiator and was followed by alkaline hydrolysis; this yielded a new branched polymer, a poly(hyperbranched polyether), with many pendant hydroxy groups. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3739–3750, 2004     

Phosphorylated Aminoacetal in the Synthesis of New Acyclic,Cyclic, and Heterocyclic Polyphenol Structures

New phosphorylated aminoacetal has been synthesized by the Kabachnik–Fields reaction; its reactivity has been studied in acid‐catalyzed condensation with linear polyphenols (2‐methylresorcinol, resorcinol, pyrogallol) and the Mannich reaction with macrocyclic polyphenol (calix[4]resorcinol). It has been determined for the first time that acid‐catalyzed reaction of phosphorus‐containing acetal with resorcinol and its derivatives in ethanol in the presence of hydrochloric acid gives new phosphorylated piperazines in addition to the compounds of diarylmethane series. Condensation of macrocyclic polyphenol (calix[4]resorcinol) with formaldehyde and N‐((dihexylphosphoryl)methyl)‐2, 2‐dimethoxyethylamine (the Mannich reaction) has resulted in novel tetrasubstituted calixarene containing aminophosphine oxide and acetal groups on the “upper rim” of molecule.     

Synthesis of Acyclic Nitroazole Nucleosides and Their Incorporation into Oligonucleotides,and Their Duplex and Triplex Formation

Acyclic nucleosides of 4‐nitro‐1H‐imidazole and 4‐nitropyrazole have been synthesized by nucleophilic addition of the appropriate 4‐nitroazole to (?)‐(S)‐(hydroxymethyl)oxirane in the presence of a catalytic amount of potassium carbonate. (+)‐(R)‐3‐(4‐nitro‐1H‐imidazol‐1‐yl)propane‐1,2‐diol and (+)‐(R)‐3‐(2‐methyl‐4‐nitro‐1H‐imidazol‐1‐yl)propane‐1,2‐diol were also obtained in an independent reaction starting from appropriate 1,4‐dinitro‐1H‐imidazole and (+)‐(R)‐3‐aminopropane‐1,2‐diol. (+)‐(R)‐3‐(4‐Nitropyrazol‐1‐yl)propane‐1,2‐diol was also obtained by direct noncatalyzed addition of 4‐nitropyrazole to (?)‐(S)‐(hydroxymethyl)oxirane, whereas the (S)‐enantiomer was obtained by reaction of 4‐nitropyrazole with (+)‐(S)‐1,2‐O‐isopropylideneglycerol under Mitsunobu reaction conditions, followed by a cleavage of the isopropylidene group with 80% AcOH. Racemization during any of these syntheses has not been observed. 3‐(4‐Nitroazol‐1‐yl)propane‐1,2‐diols were incorporated into a 26‐mer oligonucleotide. UV Thermal melting studies of duplexes of the oligonucleotides with 4‐nitropyrazole or 4‐nitro‐1H‐imidazole paired with four natural bases showed moderately decreased stabilities of the duplexes. A narrow range of melting temperatures, typically being within 2° for each acyclic nucleoside, fulfill one of the requirements of using acyclic 4‐nitroazoles as general bases. Single incorporation of 4‐nitroazoles into a 14‐mer triplex forming oligonucleotide resulted in considerably decreased triplex stabilities.     

Synthesis and Structure of Novel Thieno[2, 3‐d]Pyrimidine Derivatives Containing 1, 3, 4‐Oxadiazole Moiety

The reaction of 5‐(1‐pyrrolyl)‐4‐methyl‐2‐phenylthieno[2, 3‐d]pyrimidine carbohydrazide 5 with CS₂ in the presence of pyridine afforded the 6‐(2, 3‐dihydro‐2‐mercapto‐1, 3, 4‐oxadiazol‐5‐yl)‐4‐methyl‐5‐(1‐pyrrolyl)‐2‐phenylthieno[2, 3‐d]pyrimidine 6 , which reacted with methyl iodide in the presence of sodium methoxide to yield the 6‐(2‐methylthio‐1, 3, 4‐oxadiazol‐5‐yl)‐4‐methyl‐5‐(1‐pyrrolyl)‐2‐phenyl‐thieno[2, 3‐d]pyrimidine 7. The 6‐(2‐substituted‐1, 3, 4‐oxadiazol‐5‐yl)‐2‐phenylthieno[2, 3‐d]pyrimidine derivatives 9, 11 and 13 were obtained by the condensation of 6‐(2‐methylthio‐1, 3, 4‐oxadiazol‐5‐yl)‐2‐phenylthieno[2, 3‐d]pyrimidine 7 with appropriate secondary amines. The structure of the new compounds was substantiated from their IR, UV‐vis spectroscopy, ¹H NMR, mass spectra, elemental analysis and X‐ray crystal analysis.     

From Renewable Levulinic Acid to a Diversity of 3‐(Azol‐3‐yl)Propanoates

Efficient heterocyclization of methyl 7,7,7‐trifluoro‐4‐methoxy‐6‐oxo‐4‐heptenoate and methyl 7,7,7‐trichloro‐4‐methoxy‐6‐oxo‐4‐heptenoate into isoxazole and pyrazole derivatives that represent a new type of glutamate‐like 3‐(trihalomethylated‐1,2‐azol‐3‐yl)propanoate is reported. Preparation of the key methyl 7,7,7‐trihalo‐4‐methoxy‐6‐oxohept‐4‐enoate precursors from levulinic acid is also described. The synthetic potential of this synthetic protocol was indicated by the production of several methyl and ethyl 3‐(isoxazol‐3‐yl)propanoates and 3‐(1H‐pyrazol‐3‐yl)propanoates, and the respective acid derivatives, in good (70–95%) yields. The crystal structure for ethyl 5‐(3‐ethoxy‐3‐oxopropyl)‐1H‐pyrazole‐3‐carboxylate ( 10c ) has been determined by monocrystal X‐ray diffraction analysis. The N–H^…H intermolecular hydrogen bonds join the molecules into catamer.     

Extraannular fluorinated calixarenes: regiospecificity of the deoxofluorination reactions of bis(spirodienol) derivatives

A new route for the partial displacement of OH groups of p-tert-butylcalixarene via spirodienol derivatives is described. NaBH(4) reduction of the bis(spirodienone) calixarene derivatives 2a-2c afforded the corresponding bis(spirodienols) 3a-3c in stereospecific fashion. (1)H NMR NOESY spectroscopy indicated that in the case of 2a, the reaction proceeds by attack at the exo face of the two carbonyls (the face located anti to the spiro C-O bond). The spirodienols readily revert to p-tert-butylcalix[4]arene when heated. The reaction of 3a with the deoxofluorinating agent DAST (Et(2)NSF(3)) afforded a mixture of extraannular substituted calixarenes possessing one or two fluoro-substituted dehydroxylated rings. The bisfluorinated calixarene 6a adopts in the crystal a conformation (1,3-alternate) similar to that adopted in solution by the di-dehydroxylated calixarene 6b. An experiment conducted with a selectively deuterated spirodienol derivative indicated that the deoxofluorination reaction involves regiospecific nucleophilic attack at the gamma position of the pentadienol subunit.     

Synthesis of novel pyrazolo[3,4‐d]pyridazine,pyrido[1,2‐a]benzimidazole,pyrimido[1,2‐a]benzimidazole and triazolo[4,3‐a]pyrimidine derivatives

4‐Acetyl‐5‐methyl‐1‐phenyl‐1H‐pyrazole reacts with dimethylformamide dimethylacetal (DMF‐DMA) to afford the corresponding (E)1‐(5‐methyl‐1‐phenyl‐1H‐pyrazol‐4‐yl)‐3‐(N,N‐dimethylamino)‐2‐propen‐1‐one. The latter product undergoes regioselective 1,3‐dipolar cycloaddition with nitrilimines and nitrile oxides to afford the novel 3‐aroyl‐4‐(5‐methyl‐1‐phenyl‐1H‐pyrazol‐4‐yl)carbonyl‐1‐phenylpyrazole and 3‐aroyl‐4‐(5‐methyl‐1‐phenyl‐1H‐pyrazol‐4‐yl)carbonyl isoxazole derivatives, respectively. It reacts also with 1H‐benzimidazole‐2‐acetonitrile, 2‐aminobenzimidazole and 3‐amino‐1,2,4‐triazole to afford the novel pyrido[1,2‐a]benzimidazole, pyrimido[1,2‐a]benzimidazole and the triazolo[4,3‐a]pyrimidine derivatives, respectively. The reaction of 3‐aroyl‐4‐(5‐methyl‐1‐phenyl‐1H‐pyrazol‐4‐yl) carbonyl‐1‐phenylpyrazole derivatives with hydrazine hydrate led to a new pyrazolo[3,4‐d]pyridazine derivatives.     

Synthesis of Novel 3‐(3‐(5‐Methylisoxazol‐3‐yl)‐7H‐[1,2,4]Triazolo [3,4‐b][1,3,4]Thiadiazin‐6‐yl)‐2H‐Chromen‐2‐Ones

A novel series of coumarin substituted triazolo‐thiadiazine derivatives were designed and synthesized by using 5‐methyl isoxazole‐3‐carboxylic acid ( 1 ), thiocarbohydrazide ( 2 ), and various substituted 3‐(2‐bromo acetyl) coumarins ( 4a , 4b , 4c , 4e , 4d , 4f , 4g , 4h , 4i , 4j ). Fusion of 5‐methyl isoxazole‐3‐carboxylic acid with thiocarbohydrazide resulted in the formation of the intermediate 4‐amino‐5‐(5‐methylisoxazol‐3‐yl)‐4H‐1,2,4‐triazole‐3‐thiol ( 3 ). This intermediate on further reaction with substituted 3‐(2‐bromo acetyl) coumarins under simple reaction conditions formed the title products 3‐(3‐(5‐methylisoxazol‐3‐yl)‐7H‐[1,2,4]triazolo[3,4‐b][1,3,4]thiadiazin‐6‐yl‐2H‐chromen‐2‐ones ( 5a , 5b , 5c , 5d , 5e , 5f , 5g , 5h , 5i , 5j ) in good to excellent yields. All the synthesized compounds were well characterized by physical, analytical, and spectroscopic techniques.     

Synthesis of polypropylene graft copolymers by the combination of a polypropylene copolymer containing pendant vinylbenzene groups and atom transfer radical polymerization

This article discusses a facile and inexpensive reaction process for preparing polypropylene‐based graft copolymers containing an isotactic polypropylene (i‐PP) main chain and several functional polymer side chains. The chemistry involves an i‐PP polymer precursor containing several pendant vinylbenzene groups, which is prepared through the Ziegler–Natta copolymerization of propylene and 1,4‐divinylbenzene mediated by an isospecific MgCl₂‐supported TiCl₄ catalyst. The selective monoenchainment of 1,4‐divinylbenzene comonomers results in pendant vinylbenzene groups quantitatively transformed into benzyl halides by hydrochlorination. In the presence of CuCl/pentamethyldiethylenetriamine, the in situ formed, multifunctional, polymeric atom transfer radical polymerization initiators carry out graft‐from polymerization through controlled radical polymerization. Some i‐PP‐based graft copolymers, including poly(propylene‐g‐methyl methacrylate) and poly(propylene‐g‐styrene), have been prepared with controlled compositions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 429–437, 2005     

Copper(I)‐Catalyzed Cycloaddition of Azides to Multiple Alkynes: A Selectivity Study Using a Calixarene Framework

Copper(I)‐catalyzed addition of limited amounts of azides to multiple alkynes, which led to statistical mixtures of triazole/acetylene derivatives or, in other cases, resulted in preferred formation of multiple triazoles, was studied at pre‐organizable calixarene platforms bearing up to four propargyl groups. Depending on calixarene structures and reaction conditions, the unprecedented specific or selective formation of exhaustively triazolated calixarenes or a complete loss of the selectivity were observed. Both autocatalytic copper activation and a local copper(I) concentration increase due to copper–triazole complexation were thoroughly studied as the most expected reasons for the selectivity and both were disproved. Mixed triazolated/propargylated calixarenes and their copper(I) complexes proved not to be involved in the cascade‐like process that was modeled to be driven by an intramolecular transfer of two copper(I) ions from a just‐formed binuclear copper intermediate to the adjacent acetylene unit.     

An improved synthesis of pyrazolo[3,4‐b][1,5]benzoxazepine, ‐benzothiazepine and ‐benzodiazepine derivatives via a convenient one‐pot synthesis

An improved and simple method for the preparation of pyrazolo[3,4‐b][1,5]benzoxazepine, ‐benzothiazepine and ‐benzodiazepine derivatives was established by the reaction of 5‐chloro‐1‐phenylpyrazole‐4‐carbaldehydes, ethyl 3‐(5‐chloro‐1,3‐diphenylpyrazol‐4‐yl)‐2‐cyanoacrylate and 1,4‐diacetyl‐3‐methyl‐2‐pyrazolin‐5‐one with o‐aminophenol derivatives and o‐phenylendiamine.     

Synthesis of 1‐methyl‐, 4‐nitro‐, 4‐amino‐and 4‐iodo‐1,2‐dihydro‐3H‐pyrazol‐3‐ones

4‐Aminopyrazole‐3‐ones 4b, e, f were prepared from pyrazole‐3‐ones 1b‐d in a four‐step reaction sequence. Reaction of the latter with methyl p‐toluenesulfonate gave 1‐methylpyrazol‐3‐ones 2b‐d . Compounds 2b‐d were treated with aqueous nitric acid to give 4‐nitropyrazol‐3‐ones 3b‐d. Reduction of compounds 3b‐d by catalytic hydrogenation with Pd‐C afforded the 4‐amino compounds 4b, e, f. Using similar reaction conditions, nitropyrazole‐3‐ones derivatives 2c, d were reduced into aminopyrazole‐3‐ones 5e, f. 4‐Iodopyrazole‐3‐ones 7a, 7c and 8 were prepared from the corresponding pyrazol‐3‐ones 2a, 2c and 6 and iodine monochloride or sodium azide and iodine monochloride.