Fabrication of Fe3O4@SiO2 nanocomposites to enhance anticorrosion performance of epoxy coatings

SiO₂‐coated Fe₃O₄ (Fe₃O₄@SiO₂) nanocomposites were prepared by sol–gel method, and the anticorrosion performance of composite coatings was discussed. The structure of the Fe₃O₄@SiO₂ nanocomposites was verified through Fourier transform infrared, X‐ray diffraction, and scanning electron microscopy. Composite epoxy coatings with same concentrations of Fe₃O₄ and Fe₃O₄@SiO₂ were measured by scanning electron microscopy contact angle meter. More importantly, the Fe₃O₄@SiO₂ nanocomposites not only obtained a homogeneous dispersion and compatibility in epoxy resin but also exhibited an obvious superiority in enhancing the anticorrosion performance of epoxy coatings. Furthermore, the anticorrosion mechanism of Fe₃O₄@SiO₂/epoxy composite coating was tentatively discussed. Copyright © 2015 John Wiley & Sons, Ltd.     

Nanocomposite based on epoxy and MWCNTs modified with NiFe2O4 nanoparticles as efficient microwave absorbing material

In order to make a microwave absorbent material with good dielectric and magnetic properties, well dispersed microwave absorbing hybrid epoxy polymer composites containing nickel doped Fe₃O₄ nanocrystals coated on carbon nanotubes (NiFe₂O₄‐MWCNTs/epoxy) were synthesized by the combined precipitation‐hydrothermal method in 1‐30 wt.% of nanoparticles. Nickel possess well interaction with microwave radiation and represents fine electromagnetic interference (EMI) shielding and by dopping it into ferrite spinel structures, does not show any tendency to oxidation. Well‐dispersed NiFe₂O₄–MWCNTs/epoxy nanocomposite prepared by new in‐situ polymerization method. First, NiFe₂O₄–MWCNT nanoparticles ultrasonicated in acetone and after mixing with epoxy resin ultrasonicated again. Finally, hardner added to the composite and tuned temperature for evaporating solvent. X‐ray diffraction (XRD) and energy dispersive spectroscopy (EDS) confirmed the synthesizing NiFe₂O₄ nanoparticles. Saturation magnetization value of NiFe₂O₄‐MWCNTs is about 29 emu/g with very low remanence and coercivity content, which revealed that the NiFe₂O₄‐MWCNTs is ferromagnetic nanocrystal. Transmission electron microscopy (TEM) used to characterize the distribution of NiFe₂O₄ nanocrystals on the surface of MWCNTs. The TEM images show that NiFe₂O₄ nanocrystals have a mean size of 12 nm, and completely coated on the exterior surface of MWCNTs. The obtained results of reflection loss revealed that the maximum values of reflection loss of the NiFe₂O₄‐MWCNTs/epoxy increase by enhancing the content of nanoparticles until 10 wt.% and decreases in 30 wt.%.     

Electrochemistry and Adsorptive Stripping Voltammetric Determination of Amoxicillin on a Multiwalled Carbon Nanotubes Modified Glassy Carbon Electrode

The study of electrochemical behavior of amoxicillin (AMX), a β‐lactam antibiotic, is described on a multiwalled carbon nanotubes (MWCNTs) modified electrode by electrochemical impedance spectroscopy (EIS) and adsorptive stripping voltammetry for sensitive determination of AMX in pharmaceutical and human urine samples within a wide pH range from 2.0 to 10.0. Also, studies by Fe₂O₃ nanoparticles modified carbon paste electrode show that iron oxide impurities in the MWCNTs are not active sites for sensing of amoxicillin. Under optimized conditions, the oxidation peak has two linear dynamic ranges of 0.6–8.0 and 10.0–80.0 μM with a detection limit of 0.2 μM and a precision of <4%.     

Effect of Fe3O4‐doped sepiolite on the flammability and thermal degradation properties of epoxy composites

As‐received sepiolite/epoxy systems and Fe₃O₄‐doped sepiolite/epoxy systems were prepared, and the contents of sepiolite and Fe₃O₄‐doped sepiolite were kept as 2 and 4 wt%, respectively. Compared with sepiolite, the effect of Fe₃O₄‐doped sepiolite on the flame retardancy, combustion properties, thermal degradation, thermal degradation kinetics and thermomechanical properties of epoxy resin was investigated systematically by limiting oxygen index (LOI), cone calorimeter (Cone), thermogravimetric analysis (TGA) and dynamic mechanical analysis (DMA). Some interesting results had been acquired. The addition of sepiolite decreased heat release rate, total smoke production and smoke production rate, and obviously improved LOI values of epoxy composites. Compared with sepiolite, the addition of Fe₃O₄‐doped sepiolite further reduced parameters mentioned above of epoxy composites, and further enhanced LOI values and char residues after cone test. There might be a synergistic effect between sepiolite and Fe₃O₄ on flame retardant epoxy composite. TGA results indicated that the addition of sepiolite had a slight effect on the thermal degradation of epoxy composites; however, the addition of Fe₃O₄‐doped sepiolite accelerated the thermal degradation of epoxy composites. DMA results showed that the addition of both sepiolite and Fe₃O₄‐doped sepiolite increased the glass transition temperature (T_g) of epoxy composite. The results obtained in this paper supplied an effective solution for developing excellent flame retardant properties of polymeric materials. Copyright © 2015 John Wiley & Sons, Ltd.     

h‐BN Nanosheets as 2D Substrates to Load 0D Fe3O4 Nanoparticles: A Hybrid Anode Material for Lithium‐Ion Batteries

h‐BN, as an isoelectronic analogue of graphene, has improved thermal mechanical properties. Moreover, the liquid‐phase production of h‐BN is greener since harmful oxidants/reductants are unnecessary. Here we report a novel hybrid architecture by employing h‐BN nanosheets as 2D substrates to load 0D Fe₃O₄ nanoparticles, followed by phenol/formol carbonization to form a carbon coating. The resulting carbon‐encapsulated h‐BN@Fe₃O₄ hybrid architecture exhibits synergistic interactions: 1) The h‐BN nanosheets act as flexible 2D substrates to accommodate the volume change of the Fe₃O₄ nanoparticles; 2) The Fe₃O₄ nanoparticles serve as active materials to contribute to a high specific capacity; and 3) The carbon coating not only protects the hybrid architecture from deformation but also keeps the whole electrode highly conductive. The synergistic interactions translate into significantly enhanced electrochemical performances, laying a basis for the development of superior hybrid anode materials.     

Graphitized carbon and graphene modified Fe2O3/Li4Ti5O12 as anode material for lithium ion batteries

Graphitized carbon (GC) and graphene (GE) modified Fe₂O₃/Li₄Ti₅O₁₂ (LTO) composites have been synthesized via a solid‐state reaction, respectively. The structure, morphology and electrochemical performance of the materials have also been characterized with X‐ray diffraction (XRD), scanning electron microscope (SEM) with an energy dispersive spectroscopy (EDS) system, X‐ray photoelectron spectrometer (XPS), Fourier transform infrared spectroscopy (FTIR) and electrochemical measurements. The discharge capacities of Fe₂O₃/LTO, GC/Fe₂O₃/LTO and GE/Fe₂O₃/LTO are 100.2 mAh g^?1, 207.5 mAh g^?1 and 238.9 mAh g^?1 after 100 cycles at the current density of 176 mA g^?1. The cyclic stability and rate capability are in the order of GE/Fe₂O₃/LTO > GC/Fe₂O₃/LTO > Fe₂O₃/LTO because of the synergistic effect between GC (GE) and Fe₂O₃/LTO. Copyright © 2016 John Wiley & Sons, Ltd.     

A Comparison of a Nanostructured Enzymeless Au/Fe2O3/MWCNTs/GCE Electrode and a GOx Modified One in Electrocatalytic Detection of Glucose

Acid functionalized multi‐walled carbon nanotubes (f‐MWCNTs) were decorated with Au and Fe₂O₃ nanoparticles (FeONPs) and deposited on glassy carbon electrode (GCE). The resulting hybrid Au/Fe₂O₃/f‐MWCNTs/GCE electrode and the one further modified by glucose oxidase were compared for detection of glucose. FeONPs and Au were deposited on the f‐MWCNTs by sonication‐assisted precipitation and deposition‐precipitation methods, respectively. The morphology and structure of the samples were characterized by transmission electron microscopy, scanning electron microscopy, X‐ray diffraction and Raman spectroscopy. A uniform distribution of FeONPs with an average size of 5 nm increased the surface area of functionalized nanotubes from 39 to 50 m²/g. The electrocatalytic glucose detection on the modified electrodes was evaluated using cyclic voltammetry and chronoamperometry in 0.1 M phosphate buffer solution at pH 7.0. The non‐enzymatic and enzymatic electrodes show sensitivity of 512.4 and 921.4 mA/mM.cm² and detection limit of 1.7 and 0.9 mM, respectively. The enzymatic and enzymeless electrodes retained more than 70 % and 80 % of their cathodic faradic current after 70 days, respectively. The sensing mechanism of the non‐enzymatic biosensor is described through the reaction of glucose with iron (III) ions, while in the case of enzymatic electrode, glucose is oxidized by glucose oxidase.     

Synthesis and catalytic evaluation of Fe3O4/MWCNTs nanozyme as recyclable peroxidase mimetics: Biochemical and physicochemical characterization

In this research, the nanocomposite of multiwalled carbon nanotubes and magnetic metal oxide nanoparticles (Fe₃O₄/MWCNTs), as enzyme mimetic, was synthesized using an in situ chemical reduction method. The structure, composition and morphology of the prepared Fe₃O₄/MWCNT nanocomposite materials were characterized using X‐ray diffraction, FT‐IR and scanning electron microscopy with energy dispersive X‐ray spectroscopy, respectively. The magnetic properties of the nanocomposite were investigated by the vibrating sample magnetometer. A colorimetric system involving nanozyme, phenol/4‐aminoantipyrine and H₂O₂ was utilized for the determination of peroxidase mimetic catalytic assay. The obtained results confirmed that the synthesis of Fe₃O₄/MWCNTs nanostructures was successful. It was found that Fe₃O₄/MWCNTs nanohybrid exhibited peroxidase‐like activity without any pH limitation. Colorimetric data demonstrated that the prepared nanocatalyst had higher catalytic activity toward H₂O₂ than MWCNTs. The kinetic parameters of the nanozyme, K_m and V_max, were estimated to be 8.3 mm and 1.4 mm min^?1, respectively. The Fe₃O₄/MWCNTs nanostructures were also successfully applied for glucose detection. In addition, peroxidase‐like activity of the nanozyme increased in the presence of butyl‐imidazolium bromide ionic liquid. These biomimetic catalysts have some advantages, such as simplicity, stability, reusability and cost effectiveness, which makes them great candidates to be used in various fields of biotechnology applications.     

Magnetic carbon nanotube‐supported imidazolium cation‐based ionic liquid as a highly stable nanocatalyst for the synthesis of 2‐aminothiazoles

Magnetic carbon nanotube‐supported imidazolium ionic liquid (CNT‐Fe₃O₄‐IL) was synthesized and investigated using various characterization techniques, including Fourier transform infrared and Raman spectroscopies, X‐ray diffraction, vibrating sample magnetometry, scanning and transmission electron microscopies, and thermogravimetric and differential thermal analyses. In order to synthesize the CNT‐Fe₃O₄‐IL nanocomposites, Fe₃O₄‐decorated multi‐walled CNTs were modified with 1‐methyl‐3‐(3‐trimethoxysilylpropyl)‐1H‐imidazol‐3‐ium chloride. This catalytic system was found to be a highly stable, active, reusable and solid‐phase catalyst for the synthesis of 2‐aminothiazoles via the one‐pot reaction of ketone, thiourea and N‐bromosuccinimide under mild conditions. Immobilized magnetic ionic liquid catalysis combines the advantages of ionic liquid media with magnetic solid support nanomaterials which enables the application of nanotechnology and green chemistry in chemical processes. Copyright © 2016 John Wiley & Sons, Ltd.     

Magnetite Nanorods Stabilized by Polyaniline/Reduced Graphene Oxide as a Sensing Platform for Selective and Sensitive Non‐enzymatic Hydrogen Peroxide Detection

In this study, magnetite nanorods stabilized on polyaniline/reduced graphene oxide (Fe₃O₄@PANI/rGO) was synthesized via a wet‐reflux strategy. The possible formation of Fe₃O₄@PANI/rGO was morphologically and structurally verified by field emission scanning electron microscopy (FE‐SEM), Fourier transform infrared (FT‐IR) spectroscopy, Raman spectroscopy, X‐ray diffraction (XRD) and X‐ray photoelectron spectroscopy (XPS). Furthermore, the thermal stability of Fe₃O₄@PANI/rGO was measured by a thermogravimetric analyzer (TGA); the composite had good thermal stability owing to the ceramic nature of Fe₃O₄. The Fe₃O₄@PANI/rGO has been applied as a potential sensing platform for electrochemical detection of hydrogen peroxide (H₂O₂). By the combined efforts of extended active surface area, active carbon support, more catalytic active sites and high electrical conductivity, the Fe₃O₄@PANI/rGO exhibited an improved performance toward the non‐enzymatic detection of H₂O₂ in 0.5 M KOH with a fast response time (5 s), high sensitivity (223.7 μA mM^?1 cm^?2), low limit of detection (4.45 μM) and wide linear range (100 μM–1.5 mM). Furthermore, the fabricated sensor exhibited excellent recovery rates (94.2–104.0 %) during real sample analysis.     

Fe3O4@SiO2‐PANI‐Au Nanocomposite Prepared for Electrochemical Determination of Quercetin in Food Samples and Biological Fluids

A new electrochemical sensor based on Fe₃O₄@SiO₂‐PANI‐Au nanocomposite was fabricated for modification of glassy carbon electrode (Fe₃O₄@SiO₂‐PANI‐Au GCE). The Fe₃O₄@SiO₂‐PANI‐Au nanocomposite was characterized by TEM, FESEM‐EDS‐Mapping, XRD, and TGA methods. The Fe₃O₄@SiO₂‐PANI‐Au GC electrode exhibited an acceptable sensitivity, fast electrochemical response, and good selectivity for determination of quercetin. Under optimal conditions, the linear range for quercetin concentrations using this sensor was 1.0×10^?8 to 1.5×10^?5 mol L^?1, and the limit of detection was 3.8×10^?9 mol L^?1. The results illustrated that the offered sensor could be a possible alternative for the measurement of quercetin in food samples and biological fluids.     

Decoration of Fe3O4 nanoparticles on the surface of poly(acrylic acid) functionalized multi‐walled carbon nanotubes by covalent bonding

Fe₃O₄ nanoparticles were indirectly implanted onto functionalized multi‐walled carbon nanotubes (MWCNTs) leading to a nanocomposite with stronger magnetic performance. Poly(acrylic acid) (PAA) oligomer was first reacted with hydroxyl‐functionalized MWCNTs (MWCNTs‐OH) forming PAA‐grafted MWCNTs (PAA‐g‐MWCNTs). Subsequently, Fe₃O₄ nanoparticles were attached onto the surface of PAA‐g‐MWCNTs through an amidation reaction between the amino groups on the surface of Fe₃O₄ nanoparticles and the carboxyl groups of PAA. Fourier transform infrared spectra confirmed that the Fe₃O₄ nanoparticles and PAA‐g‐MWCNTs were indeed chemically linked. The morphology of the nanocomposites was characterized using transmission electron microscope (TEM). The surface and bulk structure of the nanocomposites were examined using X‐ray diffraction, X‐ray photoelectron spectrometer (XPS), and thermogravimetric analysis (TGA). The magnetic performance was characterized by vibrating sample magnetometer (VSM) and the magnetic saturation value of the magnetic nanocomposites was 47 emu g^?1. The resulting products could be separated from deionized water under an external magnetic field within about 15 s. Finally, the magnetorheological (MR) performances of the synthesized magnetic nanocomposites and pure Fe₃O₄ nanoparticles were examined using a rotational rheometer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Improvement on physical properties of polyethersulfone membranes modified by poly(1‐vinylpyrrolidone) grafted magnetic Fe3O4@SiO2 nanoparticles

Polyethersulfone (PES) and poly(1‐vinylpyrrolidone) (PVP) were used to prepare ultrafiltration membranes with grafted Fe₃O₄ magnetic nanoparticles (PVP‐g‐Fe₃O₄@SiO₂). The structure of synthesized PVP‐g‐Fe₃O₄@SiO₂ was confirmed by FT‐IR and SEM analysis. Physical properties of blend membranes such as thermal resistance, Tensile strength, water uptake, and hydrophilicity were also investigated. Blended membranes of PES/PVP‐g‐Fe₃O₄@SiO₂ have exhibited higher thermal resistance due to increasing the modified nanoparticle content. The hydrophilicity of the synthesized PES/PVP‐g‐Fe₃O₄@SiO₂ membranes also improved by increasing the PVP‐g‐Fe₃O₄@SiO₂ content. As expected, increasing the hydrophilicity of blended membrane, caused enhancement of fouling resistance in membranes. Results showed that the content of PVP‐g‐Fe₃O₄@SiO₂ has different effects on the properties of synthesized composite membranes. Despite increasing the content of PVP‐g‐Fe₃O₄@SiO₂ has a negative effect on elongation, positive effects on maximum stress was observed. Moreover, the water uptake of synthesized membranes was significantly enhanced in comparison to other similar studies.     

Covalent bonding of magnetic Fe3O4 nanoparticles to aminopropyl‐functionalized magnesium phyllosilicate clay: Synthesis and cytotoxic potential investigation

Stable water dispersion of Fe₃O₄ magnetic nanoparticles (NPs) were successfully synthesized by using 3‐glycidoxypropyltrimethoxysilane (GPTMS) and Mg‐phyllo (organo) silicate known as aminoclay (AC) containing pendant amino groups with the approximate composition (R₈Si₈Mg₆O₁₆(OH)₄, R = CH₂CH₂CH₂NH₂). The Fe₃O₄‐GPTMS magnetic NPs with an epoxy functional group are suitable for forming a covalent bond with the amine group of aminoclay in an epoxy ring opening reaction. Appropriate Fe₃O₄‐GPTMS‐aminoclay (FG‐AC) magnetic composite are promising carriers for the targeting and delivery of platinum‐based anticancer drugs. Analysis of the cytotoxicity of the nanostructures on a K562 leukemia cell line using a colorimetery assay shows that both the FG‐AC and cis‐platin/FG‐AC magnetic composite were biocompatible. The nanostructures characterizations were investigated by Fourier transform infrared spectroscopy, X‐ray diffraction, transmission electron microscopy and energy dispersive analysis of X‐ray techniques. Magnetic measurement revealed that the saturated magnetization of the FG‐AC nanocomposite reached 7.6 emu/g and showed the characteristics of magnetism.     

A Sensitive Electrochemical Sensor Based on Graphene Oxide Nanosheets Decorated by Fe3O4@Au Nanostructure Stabilized on Polypyrrole for Efficient Triclosan Sensing

Triclosan is broadly utilized as preservative or antiseptic in various cosmetic and personal care products. It becomes hazardous for environmental safety and human health more than a certain concentration. In this research, graphene oxide (GO) nanosheets were prepared by composing Fe₃O₄@Au nanostructure decorated GO together with polypyrrole (PPy) (Fe₃O₄@Au‐PPy/GO nanocomposite) in a facile way. The composite excellent increased the electrochemical response, presenting a high sensitive electrochemical method for triclosan detection. The synthesized Fe₃O₄@Au‐PPy/GO nanocomposite was characterized for its morphological, magnetically and structural properties by FESEM‐mapping, TEM, and XRD. The Fe₃O₄@Au‐PPy/GO nanocomposites modified glassy carbon electrodes (GCE), Fe₃O₄@Au‐PPy/GO GCE, showed a higher sensitivity good stability, reproducibility, lower LOD (2.5×10^?9 M) and potential practical application in electrochemical detection of triclosan under optimized experimental conditions.     

Ni(II)‐Adenine complex coated Fe3O4 nanoparticles as high reusable nanocatalyst for the synthesis of polyhydroquinoline derivatives and oxidation reactions

In the present study, Fe₃O₄ nanoparticles were prepared via simple and versatile procedure. Then, a novel and green catalyst was synthesized by the immobilization of Ni on Fe₃O₄ nanoparticles coated with adenine. The activity of this nanostructure compound was examined for the oxidation of sulfides, oxidative coupling of thiols and synthesis of polyhydroquinolines. The prepared catalyst was characterized by Fourier transform infrared spectroscopy (FT‐IR), scanning electron microscopy (SEM), energy‐dispersive X‐ray spectroscopy (EDS), inductively coupled plasma optical emission spectroscopy (ICP‐OES), X‐ray Diffraction (XRD), thermal gravimetric analysis (TGA), and vibrating sample magnetometer (VSM) measurements. This organometallic catalyst was recovered by the assistance of an external magnetic field from the reaction mixture and reused for seven continuous cycles without noticeable change in its catalytic activity.     

Characterization and anticorrosive properties of poly(2,3‐dimethylaniline)/nano‐Al2O3 composite synthesized by emulsion polymerization

Poly(2,3‐dimethylaniline)/nano‐Al₂O₃ composite (PAC) was synthesized by emulsion polymerization using dodecyl benzene sulfonic acid as emulsifier and dopant. The structure of PAC was characterized by Fourier fransformation infrared spectroscopy, UV–visible adsorption spectroscopy, and field emission scanning electron microscopy. The thermal stability was studied by thermogravimetric analysis, and the electrochemical performances were studied by cyclic voltammetry measurements. Epoxy coatings containing PAC and poly(2,3‐dimethylaniline) (P(2,3‐DMA)), respectively, were painted on steel, and accelerated immersion tests were performed to evaluate the anticorrosion property of the coatings in 3.5% NaCl solution. The results showed that the addition of PAC and P(2,3‐DMA) could improve the anticorrosion performance of epoxy coating significantly and the PAC coating had higher corrosion resistance than that of P(2,3‐DMA). Copyright © 2013 John Wiley & Sons, Ltd.     

Fe3O4 Anisotropic Nanostructures in Hydrogels: Efficient Catalysts for the Rapid Removal of Organic Dyes from Wastewater

Fe₃O₄ anisotropic nanostructures that exhibit excellent catalytic performance are rarely used to catalyze Fenton‐like reactions because of the inevitable drawbacks resulting from traditional preparation methods. In this study, a facile, nontoxic, water‐based approach is developed for directly regulating a series of anisotropic morphologies of Fe₃O₄ nanostructures in a hydrogel matrix. In having the advantages of both the catalytic activity of Fe₃O₄ and the adsorptive capacity of an anionic polymer network, the hybrid nanocomposites have the capability to effect the rapid removal of cationic dyes, such as methylene blue, from water samples. Perhaps more interestingly, hybrid nanocomposites loaded with Fe₃O₄ nanorods exhibit the highest catalytic activity compared to those composed of nanoneedles and nanooctahedra, revealing the important role of nanostructure morphology. By means of scanning electrochemical microscopy, it is revealed that Fe₃O₄ nanorods can efficiently catalyze H₂O₂ decomposition and thus generate more free radicals (^.OH, ^.HO₂) for methylene blue degradation, which might account for their high catalytic activity.     

Supramolecular Assemblies of Nucleoside Functionalized Carbon Nanotubes: Synthesis,Film Preparation,and Properties

Nucleoside‐functionalized multi‐walled carbon nanotubes ( N‐MWCNTs ) were synthesized and characterized. A self‐organization process using hydrogen bonding interactions was then used for the fabrication of self‐assembled N‐MWCNTs films free of stabilizing agents, polymers, or surfactants. Membranes were produced by using a simple water‐dispersion‐based vacuum‐filtration method. Hydrogen‐bond recognition was confirmed by analysis with IR spectroscopy and TEM images. Restoration of the electronic conduction properties in the N‐MWCNTs membranes was performed by removing the organic portion by thermal treatment under an argon atmosphere to give d‐N‐MWCNTs . Electrical conductivity and thermal gravimetric analysis (TGA) measurements confirmed the efficiency of the annealing process. Finally, oxidative biodegradation of the films N‐MWCNTs and d‐N‐MWCNTs was performed by using horseradish peroxidase (HRP) and low concentrations of H₂O₂. Our results confirm that functional groups play an important role in the biodegradation of CNT by HRP: N‐MWCNTs films were completely biodegraded, whereas for d‐N‐MWCNTs films no degradation was observed, showing that the pristine CNT undergoes minimal enzyme‐catalyzed oxidation This novel methodology offers a straightforward supramolecular strategy for the construction of conductive and biodegradable carbon nanotube films.     

Waste to wealth: conversion of nano‐magnetic eggshell (Fe3O4@Eggshell) to Fe3O4@Ca(HSO4)2: cheap,green and environment‐friendly solid acid catalyst

Eggshell is a hazardous waste by European Union regulations, so that discarded thousands of tons per year. To convert waste (eggshell) to wealth (catalyst), nano‐magnetic eggshell was prepared based on the nano‐Fe₃O₄, and then the eggshell was converted to Ca(HSO₄)₂ with organic acid, namely, chlorosulfonic acid. Based on the back titration, 5.18 mmol SO₄H group was loaded per gram of the nano‐structure. Using this method eggshell was converted to cheap, green and environment‐friendly solid acid catalyst. The prepared catalyst (nano‐ Fe₃O₄@Ca(HSO₄)₂) was characterized by Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), energy dispersive X‐ray spectroscopy (EDX), field emission scanning electron microscopy (FE‐SEM), transmission electron microscopy (TEM), vibrating sample magnetometer (VSM), and thermal gravimetric analysis (TGA). The activity of eggshell waste‐derived catalysts was successfully evaluated in the synthesis of value‐added products, namely indazolo[1,2‐b]‐phthalazinetrione derivatives as a benchmark multicomponent reaction. In addition, design of experiments shows that increase in amount of catalyst (and temperature), boost the reaction yield, especially with steeper slope at higher temperature.