UV‐triggered CO2‐responsive behavior of nanofibers and their controlled drug release properties

A novel nanofibrous mat featuring an ultraviolet (UV)‐induced CO₂‐responsive behavior was fabricated via electrospinning and used as a controlled drug release system. First, a random copolymer for electrospinning, poly(N,N‐diethylaminoethyl acrylamide‐co‐N‐benzylacrylamide‐co‐N,N‐dimethyl‐N‐(2‐nitrobenzyl)‐ethaneamine acrylamide‐co‐4‐acryloyloxy benzophenone) [P(DEEA‐co‐BA‐co‐DMNOBA‐co‐ABP)], was prepared based on pentafluorophenyl esters via an “active ester‐amine” chemistry reaction. Subsequently, doxorubicin hydrochloride (DOX)‐loaded P(DEEA‐co‐BA‐co‐DMNOBA‐co‐ABP) nanofibers were fabricated, yielding a new drug‐loaded nanofibrous mat as a potential wound dressing. These DOX‐loaded nanofibers can respond to UV irradiation and CO₂ stimulation. Interestingly, without UV irradiation, the fabricated nanofibers cannot exhibit any responsiveness. Therefore, the majority of the DOX was steadily stored in the nanofibers, even in the presence of CO₂. However, upon UV irradiation, the CO₂‐responsive behavior of the nanofibers was activated and the prepared nanofibers swelled slightly, resulting in the release of around 42% DOX from the nanofibers. Upon further purging with CO₂, the release amount of DOX from the nanofibers could reach up to approximately 85%, followed by the morphological transition from a nanofibrous mat to a porous hydrogel film. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1580–1586     

A protophilic solvent‐assisted solvothermal approach to Cu‐BTC for enhanced CO2 capture

Cu‐BTC–ethylenediamine (EDA)/polyethyleneimine (PEI) adsorbents were synthesized using a protophilic solvent‐assisted solvothermal method. EDA was introduced to enhance the degree of activation due to its lower boiling point allowing it to be removed easily compared with dimethylformamide. A contrast experiment was done by introducing PEI to the solvothermal solution considering its higher boiling point. Powder X‐ray diffraction, scanning electron microscopy and Raman spectroscopic characterizations were performed to investigate the effect of EDA/PEI on crystallinity and morphology of the adsorbents. ¹H NMR characterization and elemental analysis were performed to study the removal rate of organic guest molecules and the degree of activation. Nitrogen physical adsorption and CO₂ adsorption isotherms were used to measure the surface area and CO₂ adsorption capacities. The CO₂ adsorption mechanism of the synthesized adsorbents is mainly dependent on physisorption determined by surface area. Furthermore, open metal sites generated by the enhancement of degree of activation also promote the CO₂ adsorption performance. Therefore, adsorbents synthesized using the protophilic solvent‐assisted solvothermal method exhibit excellent CO₂ adsorption performance. Copyright © 2015 John Wiley & Sons, Ltd.     

Facile Electrospinning of CeO2/Bi2WO6 Heterostructured Nanofibers with Excellent Visible‐light‐driven Photocatalytic Performance

One‐dimensional (1D) CeO₂/Bi₂WO₆ heterostructured nanofibers with a diameter of about 300 nm were successfully synthesized by using a straightforward strategy combining an electrospinning technique with a sintering process. The acquired products were characterized by thermogravimetric and differential scanning calorimetric (TG‐DSC), Fourier transform infrared (FT‐IR) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET) surface area measurements, and UV/Vis spectroscopy. The obtained CeO₂/Bi₂WO₆ heterostructured nanofibers exhibited an excellent photocatalytic property for the degradation of Rhodamine B (RhB) dye driven by visible light due to the promoted separation of photoelectrons and holes and the large contact area between the photocatalyst and organic pollutant.     

Novel Flower‐Like Ag‐SiO2‐MgO‐Al2O3 Material: Preparation,Characterization and Catalytic Application in Methanol Dehydrogenation

Catalytic direct dehydrogenation of methanol to formaldehyde was carried out over Ag‐SiO₂‐MgO‐Al₂O₃ catalysts prepared by sol‐gel method. The optimal preparation mass fractions were determined as 8.3% MgO, 16.5% Al₂O₃ and 20% silver loading. Using this optimum catalyst, excellent activity and selectivity were obtained. The conversion of methanol and the selectivity to formaldehyde both reached 100%, which were much higher than other previously reported silver supported catalysts. Based on combined characterizations, such as X‐ray diffraction (XRD), scanning electronic microscopy (SEM), diffuse reflectance ultraviolet‐visible spectroscopy (UV‐Vis, DRS), nitrogen adsorption at low temperature, temperature programmed desorption of ammonia (NH₃‐TPD), desorption of CO₂ (CO₂‐TPD), etc., the correlation of the catalytic performance to the structural properties of the Ag‐SiO₂‐ MgO‐Al₂O₃ catalyst was discussed in detail. This perfect catalytic performance in the direct dehydrogenation of methanol to formaldehyde without any side‐products is attributed to its unique flower‐like structure with a surface area less than 1 m²/g, and the strong interactions between neutralized support and the nano‐sized Ag particles as active centers.     

Electrochemical Properties of Fiber‐in‐Tube‐ and Filled‐Structured TiO2 Nanofiber Anode Materials for Lithium‐Ion Batteries

Phase‐pure anatase TiO₂ nanofibers with a fiber‐in‐tube structure were prepared by the electrospinning process. The burning of titanium‐oxide‐carbon composite nanofibers with a filled structure formed as an intermediate product under an oxygen atmosphere produced carbon‐free TiO₂ nanofibers with a fiber‐in‐tube structure. The sizes of the nanofiber core and hollow nanotube were 140 and 500 nm, respectively. The heat treatment of the electrospun nanofibers at 450 and 500 °C under an air atmosphere produced grey and white filled‐structured TiO₂ nanofibers, respectively. The initial discharge capacities of the TiO₂ nanofibers with the fiber‐in‐tube and filled structures and the commercial TiO₂ nanopowders were 231, 134, and 223 mA h g^?1, respectively, and their corresponding charge capacities were 170, 100, and 169 mA h g^?1, respectively. The 1000th discharge capacities of the TiO₂ nanofibers with the fiber‐in‐tube and filled structures and the commercial TiO₂ nanopowders were 177, 64, and 101 mA h g^?1, respectively, and their capacity retentions measured from the second cycle were 89, 82, and 52 %, respectively. The TiO₂ nanofibers with the fiber‐in‐tube structure exhibited low charge transfer resistance and structural stability during cycling and better cycling and rate performances than the TiO₂ nanofibers with filled structures and the commercial TiO₂ nanopowders.     

Bio‐based nanocomposites composed of photo‐cured epoxidized soybean oil and supramolecular hydroxystearic acid nanofibers

A mixture of epoxidized soybean oil (ESO), (R)‐12‐hydroxystrearic acid (HSA) and a photoinitiator for cationic polymerization in the ESO/HSA weight ratio 10/1 was heated to 100 °C and gradually cooled to room temperature to give bio‐based gelatinous material. The photo‐curing of the gel afforded a nanocomposite composed of crosslinked ESO and supramolecular HSA nanofibers. The transmission electron microscopy observation of the photo‐cured ESO/HSA revealed that dendritic clusters of HSA nanofibers are formed in the crosslinked ESO matrix. In the differential scanning calorimetry chart of the ESO/HSA, a thermal transition from the mesophase composed of supramolecular nanofibers to isotropic state was observed at 67 °C (ΔH = 22.6 J/g‐HSA), while the T_m of crystalline HSA is 77.7 °C (ΔH_m = 159 J/g‐HSA). Tensile strength at 20 °C of the ESO‐HSA was ～80% higher than that of photo‐cured ESO without HSA. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 669–673, 2009     

Electrospinning of carboxymethyl starch/poly(L‐lactide acid) composite nanofiber

Carboxymethyl starch (CMS) is a natural polymer derived from sago starch that is obtained from sago palm (Metroxylon spp.). Herein, CMS was used as a polysaccharide source in preparations of composite nanofibers with poly(L‐lactide acid) (PLLA). The incorporation of CMS with PLLA in nanofiber form has great potential to be used in biomedical applications. The composite PLLA/CMS nanofibers were fabricated by electrospinning technique at various ratios of CMS, which were 5, 10, 15, and 20% vol/vol. The composite nanofibers were characterized according to their physical morphology, chemical interaction, wettability, water uptake, and thermal and mechanical behaviors. The result showed that uniform and bead‐free nanofibers were produced at the low ratio of CMS while fractal and discontinuing fiber was observed at a high ratio of CMS. A better mechanical strength was obtained at low CMS ratio as compared with higher one. Fourier transform infrared results showed that there was an interaction between CMS and PLLA after electrospinning. The surface hydrophilicity and water uptake increased with increasing ratio of CMS. The results from the differential scanning calorimeter analysis showed the decrease of the glass transition (T_g) and cold crystallization temperature (T_cc) of the nanofiber after addition of CMS in PLLA.     

The effect of temperature on the stability of compounds used as UV‐MALDI‐MS matrix: 2,5‐dihydroxybenzoic acid, 2,4,6‐trihydroxyacetophenone, α‐cyano‐4‐hydroxycinnamic acid, 3,5‐dimethoxy‐4‐hydroxycinnamic acid,nor‐harmane and harmane

The thermal stability of several commonly used crystalline matrix‐assisted ultraviolet laser desorption/ionization mass spectrometry (UV‐MALDI‐MS) matrices, 2,5‐dihydroxybenzoic acid (gentisic acid; GA), 2,4,6‐trihydroxyacetophenone (THA), α‐cyano‐4‐hydroxycinnamic acid (CHC), 3,5‐dimethoxy‐4‐hydroxycinnamic acid (sinapinic acid; SA), 9H‐pirido[3,4‐b]indole (nor‐harmane; nor‐Ho), 1‐methyl‐9H‐pirido[3,4‐b]indole (harmane; Ho), perchlorate of nor‐harmanonium ([nor‐Ho + H]⁺) and perchlorate of harmanonium ([Ho + H]⁺) was studied by heating them at their melting point and characterizing the remaining material by using different MS techniques [electron ionization mass spectrometry (EI‐MS), ultraviolet laserdesorption/ionization‐time‐of‐flight‐mass spectrometry (UV‐LDI‐TOF‐MS) and electrospray ionization‐time‐of‐flight‐mass spectrometry (ESI‐TOF‐MS)] as well as by thin layer chromatography analysis (TLC), electronic spectroscopy (UV‐absorption, fluorescence emission and excitation spectroscopy) and ¹H nuclear magnetic resonance spectroscopy (¹H‐NMR). In general, all compounds, except for CHC and SA, remained unchanged after fusion. CHC showed loss of CO₂, yielding the trans‐/cis‐4‐hydroxyphenylacrilonitrile mixture. This mixture was unambiguously characterized by MS and ¹H‐NMR spectroscopy, and its sublimation capability was demonstrated. These results explain the well‐known cluster formation, fading (vanishing) and further recovering of CHC when used as a matrix in UV‐MALDI‐MS. Commercial SA (SA 98%; trans‐SA/cis‐SA 5 : 1) showed mainly cis‐ to‐trans thermal isomerization and, with very poor yield, loss of CO₂, yielding (3′,5′‐dimethoxy‐4′‐hydroxyphenyl)‐1‐ethene as the decarboxilated product. These thermal conversions would not drastically affect its behavior as a UV‐MALDI matrix as happens in the case of CHC. Complementary studies of the photochemical stability of these matrices in solid state were also conducted. Copyright © 2008 John Wiley & Sons, Ltd.     

An Isoreticular Family of Microporous Metal–Organic Frameworks Based on Zinc and 2‐Substituted Imidazolate‐4‐amide‐5‐imidate: Syntheses,Structures and Properties

We report on a new series of isoreticular frameworks based on zinc and 2‐substituted imidazolate‐4‐amide‐5‐imidate (IFP‐1–4, IFP=imidazolate framework Potsdam) that form one‐dimensional, microporous hexagonal channels. Varying R in the 2‐substitued linker (R=Me (IFP‐1), Cl (IFP‐2), Br (IFP‐3), Et (IFP‐4)) allowed the channel diameter (4.0–1.7 Å), the polarisability and functionality of the channel walls to be tuned. Frameworks IFP‐2, IFP‐3 and IFP‐4 are isostructural to previously reported IFP‐1. The structures of IFP‐2 and IFP‐3 were solved by X‐ray crystallographic analyses. The structure of IFP‐4 was determined by a combination of PXRD and structure modelling and was confirmed by IR spectroscopy and ¹H MAS and ¹³C CP‐MAS NMR spectroscopy. All IFPs showed high thermal stability (345–400 °C); IFP‐1 and IFP‐4 were stable in boiling water for 7 d. A detailed porosity analysis was performed on the basis of adsorption measurements by using various gases. The potential of the materials to undergo specific interactions with CO₂ was investigated by measuring the isosteric heats of adsorption. The capacity to adsorb CH₄ (at 298 K), CO₂ (at 298 K) and H₂ (at 77 K) at high pressure were also investigated. In situ IR spectroscopy showed that CO₂ is physisorbed on IFP‐1–4 under dry conditions and that both CO₂ and H₂O are physisorbed on IFP‐1 under moist conditions.     

Amyloid‐like Nanofibrillation of Metal‐Organic Complex Arrays Ruled by Their Precisely Designed Metal Sequences

Self‐assembly of a series of dimetallic sequences constructed on a backbone with two successive tyrosine moieties ( Fmoc‐M ¹ ‐M ² ‐CO₂H ) revealed that the resultant morphology is clearly dependent on the metal sequence, where Re‐containing sequences such as homometallic Fmoc‐Re‐Re‐CO₂H specifically afforded amyloid‐like nanofibers. These findings further allowed to achieve the fibrillation of a longer metal sequence containing three different metals ( Fmoc‐Rh‐Pt‐Re‐Re‐CO₂H ). Cyclic voltammetry of the fibrillated Fmoc‐Re‐Re‐CO₂H demonstrated that the redox activity of the metal complexes in the sequence is preserved in the nanofibrous forms.     

Lithium Cyanide Supported by O‐ and N‐Donors

A series of adducts of LiCN, namely [Li(Me₂CO₃)CN], [Li(Et₂CO₃)CN], and [Li(NMP)CN] (NMP = N‐methyl‐2‐pyrrolidone) were prepared by treatment of solvent‐free LiCN with the appropriate donor. The starting material for these approaches, donor‐free LiCN, was quantitatively prepared from Me₃SiCN and Li[Me] in diethyl ether at 0 °C. Alternatively, [Li(NMP)CN] was synthesized by metathesis reaction of LiCl with NaCN in the presence of stoichiometric amounts of NMP. Although [Li(Me₂CO₃)CN] and [Li(Et₂CO₃)CN] are water‐sensitive compounds and decompose at the exposure to air, [Li(NMP)CN] is stable in air, even at elevated temperatures. The thermal stability of [Li(NMP)CN] was proven by differential thermal analysis (DTA). [Li(NMP)CN] shows thermal stability up to temperatures of about 132 °C. To evaluate the cyanation ability the reactions of 1‐bromooctane and 3‐bromocyclohexene with unsupported LiCN, [Li(NMP)CN], and a mixture of NaCN/LiCl/NMP were investigated. We found that [Li(NMP)CN] as well as LiCl/NaCN/NMP are efficient cyanation reagents comparable to the expensive and air‐sensitive, donor‐free LiCN. A product of the chloride‐cyanide‐bromide exchange could be isolated and structurally characterized by X‐ray diffraction.     

A Multi‐Wall Sn/SnO2@Carbon Hollow Nanofiber Anode Material for High‐Rate and Long‐Life Lithium‐Ion Batteries

Multi‐wall Sn/SnO₂@carbon hollow nanofibers evolved from SnO₂ nanofibers are designed and programable synthesized by electrospinning, polypyrrole coating, and annealing reduction. The synthesized hollow nanofibers have a special wire‐in‐double‐wall‐tube structure with larger specific surface area and abundant inner spaces, which can provide effective contacting area of electrolyte with electrode materials and more active sites for redox reaction. It shows excellent cycling stability by virtue of effectively alleviating pulverization of tin‐based electrode materials caused by volume expansion. Even after 2000 cycles, the wire‐in‐double‐wall‐tube Sn/SnO₂@carbon nanofibers exhibit a high specific capacity of 986.3 mAh g^?1 (1 A g^?1) and still maintains 508.2 mAh g^?1 at high current density of 5 A g^?1. This outstanding electrochemical performance suggests the multi‐wall Sn/SnO₂@ carbon hollow nanofibers are great promising for high performance energy storage systems.     

A one‐step strategy for aliphatic poly(carbonate‐ester)s with high performance derived from CO2, propylene oxide and l‐lactide

To improve the performance of PPC, aliphatic poly(carbonate‐ester)s were prepared in one‐step strategy from the terpolymerization of CO₂, propylene oxide (PO), and l ‐lactide (L ‐LA) catalyzed by zinc glutarate. Consequently giving high‐molecular weight terpolymers (PPCLAs) in a very high yield (8450.8–9435.8 g mol^?1 of Zn). The resulting terpolymers PPCLAs were characterized by ¹H NMR, showing that PPCLAs had an almost alternating structure for the components of CO₂, PO, and L‐LA. The influence of molecular weight and L‐LA content on the properties of PPCLAs was also investigated. Differential scanning calorimetry and thermogravimetric analysis (measurements revealed that the glass transition temperature (T _g) and thermal decomposition temperature (T _d) of PPCLAs are all much higher than those of PPC and increased with increasing molecular weight and L‐LA content. Tensile tests showed that the high mechanical properties of PPCLAs are due to the introduction of L‐LA into the copolymerization of CO₂ and PO. Furthermore, PPCLA4 exhibits high degradability, and after 10 weeks, the weight loss increases up to 6.58%, which is significantly higher than that of PPC of 4.58%. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis and characterization of poly (indene‐co‐pyrrole) nanofibers

Nanofibers of poly (indene‐co‐pyrrole) (CInPy) have been synthesized, using a facile chemical oxidative polymerization reaction. The effect of copolymerization was examined in view of the individually synthesized homopolymer nanostructures of polyindene (PIn) and polypyrrole (PPy). Morphological details of CInPy, studied using scanning electron microscopy (SEM) and transmission electron microscopy, (TEM) reveal the appearance of dense cottony mess, comprising of fine fibers with an average diameter of 5–10 nm. Chemical structural analysis of CInPy, conducted using ultraviolet‐visible (UV‐Vis), Fourier transform infrared (FTIR), and nuclear magnetic resonance (NMR) spectroscopic techniques, reveals that both PIn and PPy are involved in the formation of copolymer organization. Fluorescence properties of nanosized copolymer are observed in the blue region, with emission λ_max placed at 395 nm. Conductivity of copolymer nanofibers (2.4 × 10^?3 S/cm) is consistent with the morphology and thermal stability properties of integral homo‐polymers. Improved thermal stability and processability along with the enhanced optical and electrical properties of copolymer nanostructures outfit it as a better promising material in optoelectronic and light emitting nanodevices, with reference to nanosized PIn and PPy. Copyright © 2009 John Wiley & Sons, Ltd.     

Polymer cyclization inhibits thermal decomposition of carbon‐dioxide‐derived poly(propylene carbonate)s

Remarkable enhancement of CO₂‐derived poly(propylene carbonate) (PPC) against thermal decomposition was achieved by cyclization of linear PPCs. Thus, a CO₂‐derived linear vinyl‐telechelic PPC was synthesized by CO₂–propylene oxide alternating copolymerization initiated from H₂O followed by an end‐capping esterification with 4‐pentenoic acid. Cyclic PPC was synthesized by the end‐to‐end intramolecular reaction of the vinyl‐telechelic linear PPC by metathesis condensation. Comparison of the thermal decomposition temperature (T_d) with linear and cyclic PPCs confirms surprisingly enhanced T_ds of cyclic PPCs. The elimination of chain ends through cyclization is indeed valuable for enhancing T_d of CO₂‐derived PPCs and thus turn the spotlight on the materials design utilizing CO₂. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3336–3342     

Phosphorylated polyacrylonitrile‐based electrospun nanofibers for removal of heavy metal ions from aqueous solution

The phosphorylated polyacrylonitrile‐based (P‐PAN) nanofibers were prepared by electrospinning technique and used for removal of Cu²⁺, Ni²⁺, Cd²⁺, and Ag⁺ from aqueous solution. The morphological and structural properties of P‐PAN nanofibers were characterized by scanning electron microscope and Fourie transform infrared spectra. The P‐PAN nanofibers were evaluated for the adsorption capacity at various pH, contact time, and reaction temperature in a batch system. The reusability of P‐PAN nanofibers for the removal of heavy metal ions was also determined. Adsorption isotherms and adsorption kinetics were also used to examine the fundamental adsorption properties. It is found that the P‐PAN nanofibers show high efficiency, and the maximal adsorption capacities of metal ions as calculated from the Langmuir model were 92.1, 68.3, 14.8, and 51.7 mg/g, respectively. The kinetics of the heavy metal ions adsorption were found to follow pseudo‐second‐order rate equation, suggesting chemical adsorption can be regarded as the major factor in the adsorption process. Sorption/desorption results reveal that the obtained P‐PAN nanofibers can remain high removal efficiency after four cycles.     

Synthesis of hydrophilic/CO2‐philic poly(ethylene oxide)‐b‐poly(1,1,2,2‐tetrahydroperfluorodecyl acrylate) block copolymers via controlled/living radical polymerizations and their properties in liquid and supercritical CO2

Hydrophilic/CO₂‐philic poly(ethylene oxide)‐b‐poly(1,1,2,2‐tetrahydroperfluorodecyl acrylate) block copolymers were synthesized via reversible addition–fragmentation chain transfer (RAFT) polymerization, iodine transfer polymerization (ITP), and atom transfer radical polymerization (ATRP) in the presence of either degenerative transfer agents or a macroinitiator based on poly(ethylene oxide). In this work, both RAFT and ATRP showed higher efficiency than ITP for the preparation of the expected copolymers. More detailed research was carried out on RAFT, and the living character of the polymerization was confirmed by an ultraviolet (UV) analysis of the ? SC(S)Ph or ? SC(S)S? C₁₂H₂₅ end groups in the polymer chains. The quantitative UV analysis of the copolymers indicated a number‐average molecular weight in good agreement with the value determined by ¹H NMR analysis. The properties of the macromolecular surfactants were investigated through the determination of the cloud points in neat liquid and supercritical CO₂ and through the formation of water‐in‐CO₂ emulsions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2405–2415, 2004     

Activation‐Dependent Breathing in a Flexible Metal–Organic Framework and the Effects of Repeated Sorption/Desorption Cycling

A non‐interpenetrated metal–organic framework with a paddle‐wheel secondary building unit has been activated by direct thermal evacuation, guest exchange with a volatile solvent, and supercritical CO₂ drying. Conventional thermal activation yields a mixture of crystalline phases and some amorphous content. Exchange with a volatile solvent prior to vacuum activation produces a pure breathing phase with high sorption capacity, selectivity for CO₂ over N₂ and CH₄, and substantial hysteresis. Supercritical drying can be used to access a guest‐free open phase. Pressure‐resolved differential scanning calorimetry was used to confirm and investigate a systematic loss of sorption capacity by the breathing phase as a function of successive cycles of sorption and desorption. A corresponding loss of sample integrity was not detectable by powder X‐ray diffraction analysis. This may be an important factor to consider in cases where flexible MOFs are earmarked for industrial applications.     

Enhanced CO2 Adsorption Affinity in a NbO‐type MOF Constructed from a Low‐Cost Diisophthalate Ligand with a Piperazine‐Ring Bridge

A metal–organic framework (NPC‐6) with an NbO topology based on a piperazine ring‐bridged diisophthalate ligand was synthesized and characterized. The incorporated piperazine group leads to an enhanced adsorption affinity for CO₂ in NPC‐6, in which the CO₂ uptake is 4.83 mmol g^?1 at 293 K and 1 bar, ranking among the top values of CO₂ uptake on MOF materials. At 0.15 bar and 293 K, the NPC‐6 adsorbs 1.07 mmol g^?1 of CO₂, which is about 55.1 % higher than that of the analogue MOF NOTT‐101 under the same conditions. The enhanced CO₂ uptake combined with comparable uptakes for CH₄ and N₂ leads to much higher selectivities for CO₂/CH₄ and CO₂/N₂ gas mixtures on NPC‐6 than on NOTT‐101. Furthermore, an N‐alkylation is used in the synthesis of the PDIA ligand, leading to a much lower cost compared with that in the synthesis of ligands in the NOTT series, as the former does not require a palladium‐based catalyst and borate esters. Thus, we conclude that NPC‐6 is a promising candidate for CO₂ capture applications.     

The Role of Multiwall Carbon Nanotubes in Cu‐BTC Metal‐Organic Frameworks for CO2 Adsorption

The discovery of natural gas fields with a high content of CO₂ in world gas reservoirs poses new challenges for CO₂ capture. This work investigates the use of the metal‐organic framework (MOF) Cu‐BTC and hybrid MWCNTs@Cu‐BTC for CO₂ adsorption. Cu‐BTC and hybrid MWCNTs@Cu‐BTC were synthesized by the solvothermal method. The results of imaging of intact MOF pores in Cu‐BTC and hybrid MWCNTs@Cu‐BTC nanocrystals by high‐resolution transmission electron microscopy (HRTEM) under liquid nitrogen conditions are presented. Physical characterizations of the solid adsorbents were made by using a selection of different techniques, including field‐emission scanning electron microscopy (FESEM), X‐ray powder diffraction (XRD), Fourier transform infrared (FT‐IR) spectroscopy, thermogravimetric analysis (TGA), Brunauer–Emmet–Teller (BET) surface area, and CO₂ adsorption and physisorption measurements. HRTEM and FESEM confirmed that Cu‐BTC has an octahedral shape and that the surface morphology of Cu‐BTC changes by the intercalation of MWCTNs. The results show that the modified Cu‐BTC improved the CO₂ adsorption compared to pure Cu‐BTC. The increase in the CO₂ uptake capabilities of hybrid MWCNTs@Cu‐BTC was ascribed to the intercalation of MWCNTs with Cu‐BTC crystals. The CO₂ sorption capacities of Cu‐BTC and hybrid MWCNTs@Cu‐BTC were found to increase from 1.91701 to 3.25642 mmol/g at ambient conditions.