Using inductively coupled plasma-mass spectrometry for calibration transfer between environmental CRMs

Multielement analyses of environmental reference materials have been performed using existing certified reference materials (CRMs) as calibration standards for inductively coupled plasma-mass spectrometry. The analyses have been performed using a high-performance methodology that results in comparison measurement uncertainties that are significantly less than the uncertainties of the certified values of the calibration CRM. Consequently, the determined values have uncertainties that are very nearly equivalent to the uncertainties of the calibration CRM. Several uses of this calibration transfer are proposed, including, re-certification measurements of replacement CRMs, establishing traceability of one CRM to another, and demonstrating the equivalence of two CRMs. RM 8704, a river sediment, was analyzed using SRM 2704, Buffalo River Sediment, as the calibration standard. SRM 1632c, Trace Elements in Bituminous Coal, which is a replacement for SRM 1632b, was analyzed using SRM 1632b as the standard. SRM 1635, Trace Elements in Subbituminous Coal, was also analyzed using SRM 1632b as the standard.     

Using inductively coupled plasma–mass spectrometry for calibration transfer between environmental CRMs

Multielement analyses of environmental reference materials have been performed using existing certified reference materials (CRMs) as calibration standards for inductively coupled plasma–mass spectrometry. The analyses have been performed using a high-performance methodology that results in comparison measurement uncertainties that are significantly less than the uncertainties of the certified values of the calibration CRM. Consequently, the determined values have uncertainties that are very nearly equivalent to the uncertainties of the calibration CRM. Several uses of this calibration transfer are proposed, including, re-certification measurements of replacement CRMs, establishing traceability of one CRM to another, and demonstrating the equivalence of two CRMs. RM 8704, a river sediment, was analyzed using SRM 2704, Buffalo River Sediment, as the calibration standard. SRM 1632c, Trace Elements in Bituminous Coal, which is a replacement for SRM 1632b, was analyzed using SRM 1632b as the standard. SRM 1635, Trace Elements in Subbituminous Coal, was also analyzed using SRM 1632b as the standard.     

Low uncertainty determination of manganese and vanadium in environmental and biological reference materials by instrumental neutron activation analysis

The elements Mn and V were determined by INAA in about 5 mg and 100 mg aliquots of NIST SRM 1648 to elucidate discrepancies between our previous results for the 0.5 mg to 15 mg aliquots and the NIST certified and/or information values. Simultaneously, other NIST SRMs 1633a, 2704, and BCR CRMs 038, 101 and 143 were also analyzed. Special attention was given to evaluating and minimizing uncertainties of all steps of analysis. Our results compared very well with the respective certified and/or information values (if available) of all SRMs and CRMs studied, except for NIST SRM 1648. For this SRM we have found significantly lower results than the NIST values which suggests that the NIST values are positively biased by about 10%. A new value for V in BCR CRM 143 was also obtained.     

Comparison of methods for the gas-chromatographic determination of PCB congeners and chlorinated pesticides in marine reference materials

Summary Three gas-chromatographic (GC) columns with different selectivity (DB-5, DB-1701, and C-18) and two different GC detectors (electron-capture and mass-spectrometric) were used to analyze three Standard Reference Materials (SRMs), which are available from the National Institute of Standards and Technology (NIST), and two Certified Reference Materials (CRMs), which are available from the Community Bureau of Reference (BCR), for polychlorinated biphenyl (PCB) congeners and chlorinated pesticides. The materials analyzed were: SRM 1588, Organics in Cod Liver Oil; SRM 1941, Organics in Marine Sediment; SRM 1974, Organics in Mussel Tissue (Mytilus edulis); CRM 349, Chlorobiphenyls in Cod Liver Oil; and CRM 350, Chlorobiphenyls in Mackerel Oil. Results from these different methods are compared, and concentrations for additional PCB congeners and chlorinated pesticides in these reference materials, which have not been measured previously, are reported.Dedicated to Professor Dr. Wilhelm Fresenius on the occasion of his 80th birthday     

Analysis of lead in tooth enamel by laser ablation-inductively coupled plasma-mass spectrometry.

Laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) was used to determine the Pb/Ca ratios in the enamel of deciduous incisors, a biomarker of in utero Pb exposure, using pelletized bone certified reference materials (CRMs) as calibrants. The detection limit for Pb by LA-ICP-MS was 11 microg kg(-1) demonstrating an adequate sensitivity for Pb in the teeth of unexposed individuals (0.1-10 mg kg(-1)). The precision for the Pb/Ca ratios in NIST SRM 1486 Bone Meal was 3.4%. The correlation between Pb/Ca ratios obtained by LA-ICP-MS and those obtained by a digestion method was highly significant. We found one point calibration by a CRM was applicable for the quantification of Pb in tooth enamel. This method will be valuable for the assessment of in utero Pb exposure levels.     

Determination of inorganic arsenic(III) and arsenic(V) in water samples by ion chromatography/inductively coupled plasma-mass spectrometry

A method was validated for the direct determination of As(III) and As(V) in water samples by ion chromatography/inductively coupled plasma-mass spectrometry. Sample preservation required only dilution with a mobile phase containing a sufficient amount of ethylenediaminetetraacetic acid and acetic acid. Analyses of 6 certified reference materials (CRMs) of various water matrixes, including seawater, demonstrated good method accuracy. The matrixes included 2 natural water samples [National Institute of Standards and Technology Standard Reference Material (NIST SRM) 1643e and NIST SRM 1640], 1 fortified standard solution (TMDA-64), 1 fortified water sample (TM-DWS), and 2 seawater samples (CASS-4 and NASS-5). The sum of As(III) and As(V) in each CRM agreed with the respective certified value for the total amount of As within its stated uncertainty. Quantitative recoveries (96.7-102.1%) were obtained. Satisfactory results were achieved for intraday repeatability [relative standard deviation (RSD = 0.3-5.1%] and interday precision (RSD = 0.7-4.1%). In the study of fortified blanks and fortified CRMs, quantitative recoveries of As(III) and As(V) (92.5-102.6%) were obtained. Interconversion of As(III) and As(V) was not observed under the conditions of sample preservation. International comparability of analytical results was demonstrated by the analysis of 2 interlaboratory proficiency test samples, NY7011 and NY8511, from the New York State Department of Health.     

Characterization of perchlorate in a new frozen human urine standard reference material

Perchlorate, an inorganic anion, has recently been recognized as an environmental contaminant by the US Environmental Protection Agency. Urine is the preferred matrix for assessment of human exposure to perchlorate. Although the measurement technique for perchlorate in urine was developed in 2005, the calibration and quality assurance aspects of the metrology infrastructure for perchlorate are still lacking in that there is no certified reference material (CRM) traceable to the International System of Units. To meet the quality assurance needs in biomonitoring measurements of perchlorate and the related anions that affect thyroid health, the National Institute of Standards and Technology (NIST), in collaboration with the Centers for Disease Control and Prevention (CDC), developed Standard Reference Material (SRM) 3668 Mercury, Perchlorate, and Iodide in Frozen Human Urine. SRM 3668 consists of perchlorate, nitrate, thiocyanate, iodine, and mercury in urine at two levels that represent the 50th and 95th percentiles, respectively, of the concentrations (with some adjustments) in the US population. It is the first CRM being certified for perchlorate. Measurements leading to the certification of perchlorate were made collaboratively at NIST and CDC using three methods based on liquid or ion chromatography tandem mass spectrometry. Potential sources of bias were analyzed, and results were compared for the three methods. Perchlorate in SRM 3668 Level I urine was certified to be 2.70?±?0.21?μg?L(-1), and for SRM 3668 Level II urine, the certified value is 13.47?±?0.96?μg?L(-1).     

Reflections on 35 years of biological SRM production and analyses

Summary During the author's 39 years with the National Bureau of Standards (NBS)/National Institute for Standards and Technology (NIST) as an employee, and since then as Guest Researcher, he has been intimately involved with biological Standard Reference Material (SRM) production and analyses. His involvement with biological reference materials started with the very first biological certified reference material (CRM), the SRM 1571, Orchard Leaves, initiated in 1968 and issued in 1971, through the latest material (SRM 1575a, Pine Needles - renewal), issued in 2003. In addition, for more than 20 years he was Technical Coordinator for botanical SRMs for the NBS/NIST Analytical Chemistry Division. This paper contains his historical reflections and highlights from those years, and includes the techniques used to obtain and process these materials, new developments and procedures that resulted in vastly improved reference materials, the application of high accuracy neutron activation analysis to the certification of these standards, and the trace element quality assurance vital to the accuracy of these standards.     

Determination of polychlorinated dibenzo-p-dioxin and dibenzofuran congeners in air particulate and marine sediment standard reference materials (SRMs)

Due to the limited number of environmental matrix certified reference materials (CRMs) with assigned values for natural levels of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), an interlaboratory study was undertaken by the National Institute of Standards and Technology (NIST) and Environment Canada to establish reference concentration values for selected PCDD/Fs in two well-characterized NIST Standard Reference Materials (SRMs): SRM 1649a (Urban Dust) and SRM 1944 (New York/New Jersey Waterway Sediment). Results from 14 laboratories were used to provide reference values for the seventeen 2, 3, 7, 8-substituted PCDD/F congeners, the totals for individual tetra- through hepta-substituted PCDD/F homologues, and the total amount of tetra- through hepta-substituted PCDD/Fs. The mass fractions for the individual 2, 3, 7, 8-substituted congeners range from approximately 0.01 microg/kg to 7 microg/kg dry mass.     

Determination of polychlorinated dibenzo-p-dioxin and dibenzofuran congeners in air particulate and marine sediment standard reference materials (SRMs)

Due to the limited number of environmental matrix certified reference materials (CRMs) with assigned values for natural levels of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), an interlaboratory study was undertaken by the National Institute of Standards and Technology (NIST) and Environment Canada to establish reference concentration values for selected PCDD/Fs in two well-characterized NIST Standard Reference Materials (SRMs): SRM 1649a (Urban Dust) and SRM 1944 (New York/New Jersey Waterway Sediment). Results from 14 laboratories were used to provide reference values for the seventeen 2, 3, 7, 8-substituted PCDD/F congeners, the totals for individual tetra- through hepta-substituted PCDD/F homologues, and the total amount of tetra-through hepta-substituted PCDD/Fs. The mass fractions for the individual 2, 3, 7, 8-substituted congeners range from approximately 0.01 μg/kg to 7 μg/kg dry mass.     

The urgent requirement for new radioanalytical certified reference materials for nuclear safeguards, forensics, and consequence management

A multi-agency workshop was held from 25 to 27 August 2009, at the National Institute of Standards and Technology (NIST), to identify and prioritize the development of radioanalytical Certified Reference Materials (CRMs, generally provided by National Metrology Institutes; Standard Reference Materials, a CRM issued by NIST) for field and laboratory nuclear measurement methods to be used to assess the consequences of a domestic or international nuclear event. Without these CRMs, policy makers concerned with detecting proliferation and trafficking of nuclear materials, attribution and retribution following a nuclear event, and public health consequences of a nuclear event would have difficulty making decisions based on analytical data that would stand up to scientific, public, and judicial scrutiny. The workshop concentrated on three areas: post-incident Improvised Nuclear Device (IND) nuclear forensics, safeguard materials characterization, and consequence management for an IND or a Radiological Dispersion Device detonation scenario. The workshop identified specific CRM requirements to fulfill the needs for these three measurement communities. Of highest priority are: (1) isotope dilution mass spectrometry standards, specifically ²³³U, ^236gNp, ²⁴⁴Pu, and ²⁴³Am, used for quantitative analysis of the respective elements that are in critically short supply and in urgent need of replenishment and certification; (2) CRMs that are urgently needed for post-detonation debris analysis of actinides and fission fragments, and (3) CRMs used for destructive and nondestructive analyses for safeguards measurements, and radioisotopes of interest in environmental matrices.     

Quantitative analysis of selected PCB congeners in marine matrix reference materials using a novel cyanobiphenyl stationary phase

A novel p,p-cyanobiphenyl stationary phase (p-cyanobiphenyl, p-allyloxy methylpolysiloxane) has been evaluated for the GC investigation of polychlorinated biphenyls (PCBs). Several PCB congeners which coelute on the phases typically used for PCB analysis (e.g. 5% phenyl methylpolysiloxane) are separated on the p,p-cyanobiphenyl phase, including the hexachlorobiphenyl congeners PCB 163, PCB 164, and PCB 138. In this work, a p,p-cyanobiphenyl stationary phase was used to measure selected PCB congeners in two Standard Reference Materials (SRMs) available from the National Institute of Standards and Technology (NIST), and two Certified Reference Materials (CRMs) available from the Community Bureau of Reference (BCR). The materials analyzed were SRM 1588, Organics in Cod Liver Oil; SRM 1945, Organics in Whale Blubber; CRM 349, Chlorobiphenyls in Cod Liver Oil; and CRM 350, Chlorobiphenyls in Mackerel Oil. Concentrations are reported for several PCB congeners which coelute on the 5% phenyl methylpolysiloxane, including PCB 163 and PCB 164.     

Standard reference materials for foods and dietary supplements

Well-characterized certified reference materials are needed by laboratories in the food testing, dietary supplement, and nutrition communities to facilitate compliance with labeling laws and improve the accuracy of information provided on product labels, so that consumers can make good choices. As a result of the enactment of the Nutrition Labeling and Education Act of 1990 and the Infant Formula Act of 1980, the National Institute of Standards and Technology (NIST) worked to develop a series of food-matrix standard reference materials (SRMs) characterized for nutrient concentrations. These include SRM 1544 Fatty Acids and Cholesterol in a Frozen Diet Composite, SRM 1546 Meat Homogenate, SRM 1548a Typical Diet, SRM 1566b Oyster Tissue, SRM 1846 Infant Formula, SRM 1946 Lake Superior Fish Tissue, SRM 1947 Lake Michigan Fish Tissue, SRM 2383 Baby Food Composite, SRM 2384 Baking Chocolate, SRM 2385 Slurried Spinach, and SRM 2387 Peanut Butter. With the enactment of the Dietary Supplement Health and Education Act of 1994, NIST has been working to develop suites of dietary supplement SRMs characterized for active and marker compounds and for toxic elements and pesticides, where appropriate. An updated SRM 1588b Organics in Cod Liver Oil, a suite of ephedra-containing materials (SRMs 3240–3245), a carrot extract in oil (SRM 3276), and a suite of ginkgo-containing materials (SRMs 3246–3248) are available. Several other materials are currently in preparation. Dietary supplements are sometimes provided in forms that are food-like; for these, values may also be assigned for nutrients, for example SRM 3244 Ephedra-Containing Protein Powder. Both the food-matrix and dietary supplement reference materials are intended primarily for validation of analytical methods. They may also be used as “primary control materials” in assignment of values to in-house (secondary) control materials to confirm accuracy and to establish measurement traceability to NIST.     

Determination of nickel in finished product alloys by instrumental neutron activation analysis and spectrophotometry

Nickel contents in different finished product alloys were determined using a k ₀-based internal monostandard instrumental neutron activation analysis (IM-INAA) method. Five stainless steels (SS) and three high nickel alloys were analyzed by IM-INAA. BCS CRMs 225/1 (low alloy steel) and 466 (austenitic SS) and NIST SRM 247 (high Ni alloy) were analyzed to evaluate the accuracy of the method. The results of CRMs and SS were found to be in good agreement with certified or specified values. The Ni contents in the high nickel alloys were also determined by relative method of NAA for verification. Nickel contents in BCS CRM 466 and SS 316M were determined by UV–Visible spectrophotometry and the values were found to be in good agreement with IM-INAA results.     

Use of INAA in the preparation of a set of soil reference materials with certified values of total element contents

A set of certified Reference Materials was prepared consisting of four natural agricultural soils with normal (n) and elevated (e) levels of element contents: CRM 7001 Light Sandy Soil (n), CRM 7002 Light Sandy Soil (e), CRM 7003 Silty Clay Loam (n), and CRM 7004 Loam (e). In these materials, certified and/or information values of the total contents of the elements As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mn, Ni, Pb, V and Zn, and their fractions extractable by aqua regia, boiling and cold 2M nitric acid were derived from an interlaboratory comparison in which 28 laboratories participated. Highly precise and accurate procedures of instrumental neutron activation analysis (INAA) were employed for homogeneity testing and also for certification of the total element contents. For comparation purposes, NIST SRM-2704 Buffalo River Sediment was analyzed by INAA, as well. The INAA results obtained compared very well with the certified and/or information values for four soil CRMs and also with NIST values for SRM-2704. From this agreement, a very high reliability of the new soil CRMs can be inferred.     

Production and certification of NIST Standard Reference Material 2372 Human DNA Quantitation Standard

Modern highly multiplexed short tandem repeat (STR) assays used by the forensic human-identity community require tight control of the initial amount of sample DNA amplified in the polymerase chain reaction (PCR) process. This, in turn, requires the ability to reproducibly measure the concentration of human DNA, [DNA], in a sample extract. Quantitative PCR (qPCR) techniques can determine the number of intact stretches of DNA of specified nucleotide sequence in an extremely small sample; however, these assays must be calibrated with DNA extracts of well-characterized and stable composition. By 2004, studies coordinated by or reported to the National Institute of Standards and Technology (NIST) indicated that a well-characterized, stable human DNA quantitation certified reference material (CRM) could help the forensic community reduce within- and among-laboratory quantitation variability. To ensure that the stability of such a quantitation standard can be monitored and that, if and when required, equivalent replacement materials can be prepared, a measurement of some stable quantity directly related to [DNA] is required. Using a long-established conventional relationship linking optical density (properly designated as decadic attenuance) at 260 nm with [DNA] in aqueous solution, NIST Standard Reference Material (SRM) 2372 Human DNA Quantitation Standard was issued in October 2007. This SRM consists of three quite different DNA extracts: a single-source male, a multiple-source female, and a mixture of male and female sources. All three SRM components have very similar optical densities, and thus very similar conventional [DNA]. The materials perform very similarly in several widely used gender-neutral assays, demonstrating that the combination of appropriate preparation methods and metrologically sound spectrophotometric measurements enables the preparation and certification of quantitation [DNA] standards that are both maintainable and of practical utility. Figure NIST Standard Reference Material (SRM) 2372 Human Quantitation Standard     

Long-term stability of the elemental composition in biological materials

Summary Lyophilized and radiation sterilized biological certified reference materials (CRMs) are believed to be stable in their chemical composition. Generally, the certifying agencies consider the certificates of these biological CRMs valid for a 5-year shelf life, i.e., apart from measurable moisture content, the chemical composition should not change during that time. The long-term behavior of fresh frozen material is not known. In this study the elemental compositions of the Bovine Liver Standard Reference Material (SRM 1577) and human liver tissue samples are evaluated over a time period of more than 7 years. The concentrations of selected elements were determined by neutron activation analysis at various times. The initial evaluation of zinc, selenium and arsenic results gives no indication of changes during 7 years storage of fresh frozen tissues, however, a trend towards lower arsenic concentrations has been observed in SRM 1577 during a 10-year period.

---

Langzeitstabilität der Elementzusammensetzung in biologischen Materialien

     

Determination of Arsenic and Vanadium in Airborne Related Reference Materials By ICP-MS

This study investigated sample digestion techniques and instrumental interference in determining As and V in airborne related reference materials using inductively coupled plasma mass spectrometry (ICP-MS). Four reference materials, NIST SRM 1648 urban particulate matter,BCR Reference Material No. 176 city waste incineration ash, NIST SRM 2709 San Joaquin soil, and NIST SRM 1633b coal fly ash were dissolved through acid mixture high-pressure bomb digestion.     

Filling the AOAC triangle with food-matrix standard reference materials

Well-characterized reference materials are needed by laboratories in the food testing and nutrition communities to facilitate compliance with nutritional labeling laws, to provide traceability for food exports needed for acceptance in many foreign markets, and to improve the accuracy of nutrition information that is provided to assist consumers in making sound dietary choices. As a result of the enactment of the Nutrition Labeling and Education Act of 1990 and the Infant Formula Act of 1980, the National Institute of Standards and Technology (NIST) has developed a suite of food-matrix Standard Reference Materials (SRMs) characterized for nutrient concentrations. These include SRM 1544 Fatty Acids and Cholesterol in a Frozen Diet Composite, SRM 1546 Meat Homogenate, SRM 1548a Typical Diet, SRM 1566b Oyster Tissue, SRM 1846 Infant Formula, SRM 1946 Lake Superior Fish Tissue, SRM 2383 Baby Food Composite, SRM 2384 Baking Chocolate, SRM 2385 Spinach, and SRM 2387 Peanut Butter. Many of these materials were developed at the request of the food industry to populate a nine-sectored fat-protein-carbohydrate triangle developed by AOAC International. With the completion of SRM 2387, SRMs representing each sector of the triangle are now available. These food-matrix reference materials are intended primarily for validation of analytical methods for the measurement of proximates, fatty acids, vitamins, minerals, and so on in foods of similar composition. They may also be used as "primary control materials" in the value-assignment of in-house, secondary, control materials to confirm accuracy as well as to establish traceability to NIST.