Sulfur-Containing Vinyl Monomers. XIV. Radical Polymerizations and Copolymerizations of Vinyl Mercaptobenzazoles

Vinyl mercaptobenzazoles [thiazole (VMBT), oxazole (VMBO), and imidazole (VMBI)] were prepared through dehydrochlorination of the respective β-chloroethyl mercaptobenzazoles. These monomers were found to undergo vinyl polymerization in the presence of light or radical initiator, α,α'-azobisisobutyonitrile, to give relatively high molecular weight homopolymers. From the results of radical copolymerizations of these monomers with various monomers, the copolymerization parameters were determined as follows: VMBT(M₂): r₁ styrene(M₁): r₁ = 2.12 ± 0.09, r₂ = 0.336 ± 0.028, Q₂ = 0.75, e_z = ?1.38; VMBO(M₂)-styrene(M₁): r₁ = 2.61 ± 0.13, r₂ = 0.274 ± 0.03, Q₂ = 0.61, e₂ = ?1.38; VBMI(M₂)-styrene(M₁) r₁ =4.0, r₂ = 0.2, Q₂ = 0.37, e₂ = ?1.17. The polymerization reactivities of these monomers obtained from these parameters were compared with those of other vinyl sulfide monomers and discussed.     

Aminimides. IV. Homo- and copolymerization studies on trimethylamine methacrylimide

Trimethylamine methacrylimide (TAMI) has been homo- and copolymerized with methyl methacrylate, vinyl acetate, vinyl chloride, hydroxypropyl methacrylate, and acrylonitrile by free-radical initiators to soluble, low molecular weight polymers containing pendant aminimide groups along the backbone of the polymer chains. The reactivity ratios in the copolymerization of TAMI (M₁) with acrylonitrile (M₂) were determined: r₁ = 0.10 ± 0.01, r₂ = 0.37 ± 0.04. The Alfrey-Price Q and e values for TAMI were also calculated: Q = 0.18, e = ?0.60. This preliminary work indicates that TAMI has potential for the preparation of reactive polymers.     

Aminimides. V. Preparation and polymerization studies of trimethylamine-4-vinylbenzimide

Trimethylamine-4-vinylbenzimide (TAVBI) has been homo- and copolymerized with styrene, methyl methacrylate, and hydroxypropyl methacrylate by free-radical initiators to soluble, low molecular weight polymers containing pendant aminimide groups along the backbone of the polymer molecules. The reactivity ratios in the copolymerization of TAVBI (M₁) with styrene (M₂) were determined: r₁ = 0.63 ± 0.07, r₂ = 0.47 ± 0.05. The Alfrey-Price Q and e values for TAVBI were also calculated: Q = 0.88, e = 0.31. This introductory work indicates that TAVBI has potential for the preparation of a wide variety of reactive polymers.     

Copolymerization of 4-cyclopentene-1,3-dione with p-chlorostyrene and vinylidene chloride

The copolymerization of 4-cyclopentene-1,3-dione (M₂) with p-chlorostyrene and vinylidene chloride is reported. The copolymers were prepared in sealed tubes under nitrogen with azobisisobutyronitrile initiator. Infrared absorption bands at 1580 cm.^?1 revealed the presence of a highly enolic β-diketone and indicated that copolymerization had occurred. The copolymer compositions were determined from the chlorine analyses and the reactivity ratios were evaluated. The copolymerization with p-chlorostyrene (M₁) was highly alternating and provided the reactivity ratios r₁ = 0.32 ± 0.06, r₂ = 0.02 ± 0.01. Copolymerization with vinylidene chloride (M₁) afforded the reactivity ratios r₁ = 2.4 ± 0.6, r₂ = 0.15 ± 0.05. The Q and e values for the dione (Q = 0.13, e = 1.37), as evaluated from the results of the vinylidene chloride case, agree closely with the previously reported results of copolymerization with methyl methacrylate and acrylonitrile and confirm the general low reactivity of 4-cyclopentene-1,3-dione in nonalternating systems.     

Monomer reactivity ratio and Q–e values for copolymerization of hydroxyalkyl acrylates and 2-(1-aziridinyl)ethyl methacrylate with styrene

Copolymers of 2-hydroxyethyl acrylate, hydroxypropyl acrylate, and 2(1-aziridinyl)-ethyl methacrylate (M₂) with styrene (M₁) were prepared in benzene solution at 60°C. Benzoyl peroxide, 0.1–0.2 mole-%, was used as initiator. Copolymer samples with the molar concentrations of M₂ feed ranging from 0.10 to 0.85 were used to determine the reactivity ratios. Elemental analysis and nuclear magnetic resonance spectroscopy (NMR) were used to determine copolymer compositions. There was a solubility problem when the latter technique was applied. When samples which were completely soluble were analyzed, the results obtained from NMR and elemental analysis were in excellent agreement. The monomer reactivity ratios and the corresponding parameters for the copolymerization of (M₁) with 2-hydroxyethyl acrylate are: r₁ = 0.38 ± 0.02, r₂ = 0.34 ± 0.03; Q₂ = 0.85, e₂ = 0.64; with hydroxypropyl acrylate are: r₁ = 0.45 ± 0.03, r₂ = 0.36 ± 0.03; Q₂ = 0.75, e₂ = 0.56; with 2(1-aziridinyl)ethyl methacrylate are: r₁ = 0.53 ± 0.02, r₂ = 0.63 ± 0.04; Q₂ = 0.82, e₂ = 0.25.     

Aminobutadienes. X. Polymerization and copolymerization of 2-phthalimidomethyl-1,3-butadiene

The polymerization and copolymerization of 2-phthalimidomethyl-1,3-butadiene were investigated. This monomer was easily polymerized by benzoyl peroxide catalyst in bulk or in solvent, and by γ-radiation in the solid state to give polymers having a softening point of 135–145°C. Although these resulting polymers did not give x-ray diffraction patterns, they showed crystalline patterns by electron diffraction. On the other hand, cationic polymerization with the use of boron trifluoride diethyl etherate in chloroform was attempted, but no formation of the polymer was observed. Also, this monomer was easily copolymerized with styrene in N,N-dimethylformamide. The monomer reactivity ratios and Alfrey-Price Q and e values calculated from the copolymerization data of this monomer (M₁) with styrene (M₂) were r₁ = 2.0 ± 0.13, r₂ = 0.15 ± 0.02, and Q₁ = 2.78, e₁ = 0.30.     

Copolymerization of 2-sulfoethyl methacrylate

Copolymers of 2-sulfoethyl methacrylate, (SEM) were prepared with ethyl methacrylate, ethyl acrylate, vinylidene chloride, and styrene in 1,2-dimethoxyethane solution with N,N′-azobisisobutyronitrile as initiator. The monomer reactivity ratios with SEM (M₁) were: vinylidene chloride, r₁ = 3.6 ± 0.5, r₂ = 0.22 ± 0.03; ethyl acrylate, r₁ = 3.2 ± 0.6, r₂ = 0.30 ± 0.05; ethyl methacrylate, r₁ = 2.0 ± 0.4, r₂ = 1.0 ± 0.1; styrene, r₁ = 0.6 ± 0.2, r₂ = 0.37 ± 0.03. The values of the copolymerization parameters calculated from the monomer reactivity ratios were e = +0.6 and Q = 1.4. Comparison of the monomer reactivities indicates that SEM is similar to ethyl methacrylate with regard to copolymerization reactivity in 1,2-dimethoxyethane solution. The sodium salt of 2-sulfoethyl methacrylate, SEM^?Na^⊕, was copolymerized with 2-hydroxyethyl methacrylate (M₂) in water solution. Reactivity ratios of r₁ = 0.7 ± 0.1 and r₂ = 1.6 ± 0.1 were obtained, indicating a lower reactivity of SEM^?Na^⊕ in water as compared to SEM in 1,2-dimethoxyethane. This decreased reactivity was attributed to greater ionic repulsion between reacting species in the aqueous medium.     

Copolymerization of trialkylvinylgermane

The polymerization of trimethylvinylgermane (TMGeV) with the use of γ-ray, radical, and ionic initiator was attempted, but homopolymer was not obtained. This monomer did not undergo polymerization by itself, but polymerized with high concentration of n-BuLi. Copolymerization of TMGeV with styrene (St) and methyl methacrylate (MMA) was carried out by using radical initiator. From the results obtained by the copolymerization, monomer reactivity ratios and Q–e values were obtained as follows: for the system St(M₁)–TMGeV (M₂), r₁ = 24.4, r₂ = 0.009, Q₂, = 0.0049, e₂ = 0.43; for the system MMA (M₁)–TMGeV (M₂), r₁ = 19.98, r₂ = 0.05; Q₂ = 0.037, e₂ = 0.43., The polymerizability of TMGeV is discussed on the basis of the Q and e values obtained.     

Synthesis and polymerization of N-[4-N′- (α-methylbenzyl)aminocarbonylphenyl]maleimide

A novel type of optically active N-[4-N′-(α-methylbenzyl)aminocarbonylphenyl]maleimide [(R)-MBCP] was synthesized from maleic anhydride, p-aminobenzoic acid, and (R)-methylbenzylamine. Radical homopolymerization of (R)-MBCP was performed in tetrahydrofuran (THF) at 50 and 70°C for 24 h to give optically active polymers having [α]²⁵_D = -141° and -129°, respectively. Anionic polymerization of (R)-MBCP with n-butyllithium in THF and N,N-dimethylformamide gave an optically active polymer having ?78 to ?81° of [α]²⁵_D. Radical copolymerizations of (R)-MBCP (M₁) were performed with styrene (ST, M₂) and methyl methacrylate (MMA, M₂) in THF at 50°C. The monomer reactivity ratios (r₁, r₂) and the Alfrey-Price Q-e values were determined as follows: r₁ = 0.009, r₂ = 0.091, Q₁ = 1.30, e₁ = 1.87 in the (R)-MBCP-ST; r₁ = 0.27, r₂ = 1.21, Q₁ = 0.93, e₁ = 1.46 in the (R)-MBCP-MMA system. Chiroptical properties of the polymers were also investigated. © 1992 John Wiley & Sons, Inc.     

Synthesis and polymerization of optically active N-α-methylbenzylmaleimide

Optically active N-α-methylbenzylmaleimide (MBZMI) was prepared with maleic anhydride and d-(+)-α-methylbenzylamine. The polymerizations of MBZMI were carried out with α,α′-azobisisobutyronitrile (AIBN) and n-butyllithium (n-BuLi) in tetrahydrofuran (THF). The specific rotations of the polymers obtained by AIBN and n-BuLi initiator were +11.1° to +13.0° and ?57.0° to ?89.2°, respectively. The weight-average molecular weights (M_w) for the polymers were between 4200 and 8000. Furthermore, MBZMI was copolymerized with styrene (ST) and methyl methacrylate (MMA) with AIBN in THF at 50°C to obtain optically active copolymers. The monomer reactivity ratios of MBZMI (M₁) with ST (M₂) were obtained as r₁ = 0.027, r₂ = 0.094 in the MBZMI–ST and r₁ = 0.15, r₂ = 1.54 in the MBZMI–MMA system. The Q-e values for MBZMI were Q₁ = 0.78, e₁ = 1.62. All the polymers and copolymers were found to show a weakly negative circular dichroism (CD) peak at about 250 nm and a strongly positive CD peak at about 220 nm.     

Synthesis and Chiroptical Properties of Poly[N-(4-N′-(α-Methylbenzyl)-Aminocarbonylphenyl)-Mamaleimide]

Abstract

Radical homopolymerization of N-[4-N′-(α-methylbenzyl)-aminocarbonylphenyl]maleimide ((S)-MBCP) was carried out at 50 and 70°C for 24 h to give optically active polymers ([α]²⁵ _D = 159.8 to 163.4°). Radical copolymerizations of (S)-MBCP (M₁) were performed with styrene (ST, M₂, methyl methacrylate (MMA, M²) in THF at 50°C. The monomer reactivity ratios (r ₁, r ₂) and the Alfrey-Price Q, e values were determined as follows: r ₁ = 0.32, r ₂= 0.14, Q ₁ = 1.74, e ₁ = 0.96 in the (S)-MBCP-ST system; r ₁ = 0.54, r ₂ = 0.93, Q ₁ = 1.11, e ₁ = 1.23 in the (S)-MBCP-MMA system. Chiroptical properties of the polymers and the copolymers were also investigated, and asymmetric induction into the copolymer main chain is discussed.     

Copolymerization of glycidyl methacrylate with alkyl acrylate monomers

A newer approach to obtaining acrylic thermoset polymers with adequate hydrophilicity required for various specific end uses is reported. Glycidyl methacrylate (GMA) was copolymerized with n-butyl acrylate (n-BA), isobutyl acrylate (i-BA), and 2-ethylhexyl acrylate (2-EHA) in bulk at 60°C. with benzoyl peroxide as free radical initiator. The copolymer composition was determined from the estimation of epoxy group. Reactivity ratios were calculated by the Yezrielev, Brokhina, and Roskin method. For copolymerization of GMA (M₁) with n-BA (M₂) the reactivity ratios were r₁ = 2.15 ± 0.14, r₂ = 0.12 ± 0.03; with i-BA (M₂) they were r₁ = 1.27 ± 0.06, r₂ = 0.33 ± 0.031; and with 2-EHA (M₂) they were r₁ = 2.32 ± 0.14, r₂ = 0.13 ± 0.009. The reactivity ratios were the measure of distribution of monomer units in a copolymer chain; the values obtained are compared and discussed.     

Copolymerization of cationic monomers with acrylamide in an aqueous solution

The radical copolymerizations of commercially available cationic monomers (M₁) with acrylamide (M₂) have been investigated at pH 6.1 in aqueous solutions. The cationic groups in copolymers were analyzed by a colloid titration method and the reactivity ratios were determined by the Fineman–Ross method. The values of r₁ and r₂ were 1.71 and 0.25 for methacryloyloxyethyltrimethylammonium chloride? M₂, 1.68 and 1.26 for N,N-dimethylaminoethylmethacrylate? M₂, 1.13 and 0.57 for methacrylamidopropyltrimethylammonium chloride? M₂, 1.10 and 0.47 for N,N-dimethylaminopropylmethacrylate? M₂, 0.47 and 0.95 for N,N-dimethylaminopropylacrylamide? M₂, 0.48 and 0.64 for acryloyloxyethyltrimethylammonium chloride-M₂, and 0.58 and 6.7 for dimethyldiallylammonium chloride-M₂ systems. The Alfrey-Price Q and e values were calculated and the linear relationship between log Q and ultraviolet absorption maxima of cationic monomers was found.     

Silyl enol ethers as monomer. III. Radical polymerization and copolymerizations of 2-trimethylsilyloxy-1,3-butadiene and desilylation of the resulting polymers

2-Trimethylsilyloxy-1,3-butadiene (TMSBD), the silyl enol ether of methyl vinyl ketone, was homopolymerized with a radical initiator to afford polymers with a molecular weight of ca. 10⁴. Radical copolymerizations of TMSBD with styrene (ST) and acrylonitrile (AN) in bulk or dioxane at 60°C gave the following monomer reactivity ratios: r₁ = 0.64 and r₂ = 1.20 for the ST (M₁)–TMSBD (M₂) system and r₁ = 0.036 and r₂ = 0.065 for the AN (M₁)–TMSBD (M₂) system. The Q and e values of TMSBD determined from the reactivity ratios for the former copolymerization system were 2.34 and ?1.31, respectively. The resulting polymer and copolymers were readily desilylated with hydrochloric acid or tetrabutylammonium fluoride as catalyst to yield analogous polymers having carbonyl groups in the polymer chains.     

Synthesis and Polymerization of Optically Active Mono-I-Menthyl Itaconate

Optically active mono-l-menthyl itaconate (MMI) was prepared from ita-conic acid and l-menthol. MMI was polymerized in bulk at 80°C to give a chiral homopolymer having -49.5° specific rotation. MMI (M₁ was copolymerized with styrene (ST, M₂), methyl methacrylate (MMA, M₂), and N-cyclohexylmaleimide (CHMI, M₂) by using 2,2′-azobisisobutyronitrile (AIBN) as the radical initiator and benzene as the polymerization solvent at 50°C. The monomer reactivity ratios (r₁, r₂) and Alfrey-Price Q, e values were determined to be r₁ = 0.28, r₂ = 0.32, Q₁ = 0.90, and e₁ = 0.75 in MMI-ST; r₁ = 0.09 and r₂ = 0.51 in MMI-MMA; and r₁ = 0.78 and r₂ = 0.39 in MMI-CHMI. The chiroptical properties of the polymers were investigated.     

Ferrocene-containing polymers. II. Radiation-induced copolymerizations of ferrocenylmethyl methacrylate with styrene,methyl methacrylate,and ethyl acrylate

Ferrocenylmethyl methacrylate (FMMA) was copolymerized with styrene (St), methyl methacrylate (MMA), and ethyl acrylate (EA) in benzene solution at 25°C by γ radiation. The reactions proceeded by a free radical mechanism, and monomer reactivity ratios were derived by the Tidwell–Mortimer method for St(M₁)–FMMA(M₂), r₁ = 0.35 and r₂ = 0.46; for MMA(M₁–FMMA)(M₂), r₁ = 0.85 and r₂ = 1.36; for EA(M₁)–FMMA(M₂), r₁ = 0.36 and r₂ = 3.03. The Q and e values of FMMA determined from copolymerization with St were 0.97 and 0.55, respectively. Terpolymerization of a MMA–FMMA–EA system based on the Alfrey–Goldfinger equations was studied. This is a typical terpolymerization system in which reactivities of the monomers obey the Q–e scheme. Comparing the results obtained here with those previously reported for other monomers, we concluded that FMMA is one of the most highly reactive monomers among alkyl methacrylates.     

Synthesis and Polymerization of Optically Active Di-L-Menthyl Itaconate

Optically active di-L-menthyl itaconate (DMI) was prepared from itaconic acid and L-menthol. DMI was polymerized in bulk at 80°C to give a chiral homopolymer having a specific rotation of -76.9°. DMI (M ₁) was copolymerized with styrene (ST, M ₂), N-cyclohexylmaleimide (CHMI, M ₂), vinyl acetate (VAc, M ₂) and methyl methacrylate (MMA, M ₂) with azobisisobutyronitrile in benzene at 50°C. The monomer reactivity ratios (r ₁, r ₂) and Alfrey-Price Q, e values were determined as r ₁ = 0.56, r ₂ = 0.55, Q ₁ = 0.76, e ₁ = 0.29 for DMI-ST; r ₁ = 0.0, r ₂ = 5.6 for DMI-MMA; r ₁ = 0.0, r ₂ = 0.25 for DMI-VAc; and r ₁ = 0.31, r ₂ = 0.56 for DMI-CHMI. The chiroptical properties of the polymers were investigated.     

Radical homo- and copolymerizations of methyl α-trifluoroacetoxyacrylate

Radical homo- and copolymerizations of methyl α-trifluoroacetoxyacrylate (MTFAA) are studied by using azo initiators at 40 and 60°C. The rate of the homopolymerization of MTFAA was lower than that of methyl α-acetoxyacrylate. Monomer reactivity ratios (r), and Q and e values were estimated to be r₁ = 0.03, r₂ = 0.27, Q₁ = 0.65, and e₁ = 1.38 from the copolymerization of MTFAA (M₁) and styrene (M₂) at 60°C. Preferential crosspropagation was observed in particular in the copolymerization of MTFAA and α-methylstyrene. The influence of replacing the hydrogens of the acetoxy moiety of the acyloxyacrylate with the fluorines upon the copolymerization reactivity is discussed on the basis of the ¹³C-NMR chemical shift of various acyloxyacrylates. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3537–3541, 1997     

Synthesis and Polymerization of N-(L-Menthylcarboxylatomethyl)maleimide

A new type of optically active N-(L-menthylcarboxylatomethyl)maleimide (MGMI) was synthesized from maleic anhydride, glycine, and L-menthol. Radical homopolymerization of MGMI was performed at 50°C for 24 h to give optically active polymer having [α]_D = -57°. Radical copolymerizations of MGMI (M ₁) were performed with styrene (ST, M ₂), methyl methacrylate (MMA, M ₂) in benzene at 50°C. From the results, the monomer reactivity ratios (r ₁, r ₂) and the Alfrey-Price Q, e values were determined as follows: r ₁ = 0.16, r ₂ = 0.006 for the MGMI-ST system; r ₁ = 0.15, r ₂ = 1.65 for the MGMI-MMA system, and Q ₁ = 0.72, e ₁ = 1.59 calculated from the MGMI-MMA system. Anionic homopolymerizations of MGMI were also carried out. Chiroptical properties of the polymers were investigated.     

Effect of substitution on the reactivity of some new p-phenylacrylamide derivatives with organotin monomers

Three new monomers of p-phenylacrylamide derivatives were prepared by either the reaction of p-methyl-, p-nitro-, and p-chloroaniline with acryloyl chloride or with acrylic acid in the presence of dicyclohexyl carbodiimide (DCCI). The prepared monomers were copolymerized with each of tri-n-butyltinacrylate and tri-n-butyltinmethacrylate. Copolymerization reactions were carried out in dioxane at 70°C using 1 mol % azobisisobutyronitrile as a free radical initiator. The structure of the new monomers and the prepared copolymers were investigated by IR and ¹H-NMR spectroscopy. The monomer reactivity ratios for the copolymerization of p-chlorophenylacrylamide (M₁) with each of tri-n-butyltinacrylate (TBTA) and tri-n-butyltinmethacrylate (TBTMA) (M₂) were found to be r₁ = 2.6; r₂ = 0.83 and r₁ = 1.3; r₂ = 1.71, respectively. In case of p-tolyacrylamide (M₁) with TBTA and TBTMA (M₂) r₁ = 0.35, r₂ = 1.03 and r₁ = 1.38, r₂ = 0.366 respectively. The Q and e values for the prepared p-tolyl- and p-chlorophenylacrylamide were calculated © 1993 John Wiley & Sons, Inc.