Diffuse reflection broad bandwidth sum frequency generation from particle surfaces

We report the first vibrational sum frequency generation (VSFG) spectroscopic study from particle surfaces of powdered solids using a modified SFG approach, diffuse reflection broad bandwidth sum frequency generation (DR-BBSFG). The DR-BBSFG spectrum of sodium dodecyl sulfate (SDS, C(12)H(25)SO(4)Na) powdered solids was obtained. Five peaks were resolved by calculated fits. Possible origins of the SFG response from SDS particle surfaces are discussed. Potential applications of DR-BBSFG spectroscopy are addressed.     

Water-dissolvable sodium sulfate nanowires as a versatile template for the fabrication of polyelectrolyte- and metal-based nanotubes

This study presents the synthesis of water-dissolvable sodium sulfate nanowires, where Na(2)SO(4) nanowires were produced by an easy reflux process in an organic solvent, N,N-dimethylformamide (DMF) and formed from the coexistence of AgNO(3), SnCl(2), dodecylsodium sulfate (SDS), and cetyltrimethylammonium bromide (CTAB). Na(2)SO(4) nanowires were derived from SDS, and the morphology control of the Na(2)SO(4) nanowires was established by the cooperative effects of Sn and NO(3)(-), while CTAB served as the template and led to homogeneous nanowires with a smooth surface. Since the as-synthesized sodium sulfate nanowires are readily dissolved in water, these nanowires can be treated as soft templates for the fabrication of nanotubes by removing the Na(2)SO(4) core. This process is therefore significantly better than other reported methodologies to remove the templates under harsh condition. We have demonstrated the preparation of biocompatible polyelectrolyte (PE) nanotubes using a layer-by-layer (LbL) method on the Na(2)SO(4) nanowires and the formation of Au nanotubes by the self-assembly of Au nanoparticles. In both nanotube synthesis processes, PEI (polyethylenimine), PAA (poly(acrylic acid)), and Au nanoparticles served as the building blocks on the Na(2)SO(4) templates, which were then rinsed with water to remove the core templates. This unique water-dissolvable template is anticipated to bring about versatile and flexible downstream applications.     

Small-angle neutron scattering study of particle coalescence and SDS desorption during film formation from carboxylated acrylic latices

Four monodisperse core-shell latices were synthesized for small-angle neutron scattering (SANS) studies, differing by the acrylic acid content in the particle shell (1 or 4 wt%) and the T(g) of the acrylic core (around -40 or 10 degrees C). In a first part, the coalescence kinetics of the surfactant-free latices were studied. It was shown that coalescence was hindered by an increase in the acrylic acid content of the shell, pH of the latex, and Tg of the core. These results could be interpreted in terms of chain mobility in the shell and in the core. Upon coalescence, the hydrophilic phase was segregated in spherical, polydisperse domains with an average diameter of 110 nm. In a second part, labeled SDS was used to follow desorption of the surfactant during film formation. It was shown that desorption occurred early in the film formation process when the latex still contained around 20% of water. A small fraction of the surfactant remained irreversibly adsorbed at the particle surface.     

The use of selected acrylate and acrylamide-based surfmers and polysoaps in the emulsion polymerization of styrene

Polymerizable surfactants (surfmers) 12-acryloyloxy-dodecanoic acid and 11-acrylamidoundecanoic acid and their respective sodium salts were prepared and then polymerized to form their corresponding oligomers using reversible addition-fragmentation chain transfer (RAFT). Different concentrations of both the surfmers, their sodium salts, and their RAFT oligomers were used as polysoaps in the emulsion polymerization of styrene. Stabilities of the pre-emulsions before polymerization were determined and compared. After polymerization, particle sizes and polydispersities of the resulting polystyrene latices were determined. Sodium dodecyl sulfate (SDS) was used as a reference surfactant to compare the particle sizes and stabilities of the pre-emulsions prepared using surfmers and polymeric surfactants (polysoaps) as particle stabilizers. Emulsion polymerization of styrene using these surfmers and polysoaps all led to latices which were stable for a period of more than six months, as indicated by constant particle sizes, whereas latices prepared using the conventional surfactant, SDS, were not as stable.     

Rheology of hydrophobically modified polyacrylamide-co-poly(acrylic acid) on addition of surfactant and variation of solution pH

Constant shear and shear dependent viscosity measurements are reported in aqueous systems of co- and terpolymers of acrylamide (AM), N-n-alkylacrylamide (C10, C12, and C14 alkyl groups), and acrylic acid (AA) with added anionic surfactant sodium dodecyl sulfate (SDS). The results are presented as three-dimensional plots of viscosity vs surfactant concentration and pH at constant shear rate or viscosity vs shear rate and surfactant concentration at constant pH. For terpolymers incorporating AA, a strong viscosity maximum is observed at intermediate pH values (pH 4-6) where the AA groups are partially ionized and at SDS concentrations close to the critical micelle concentration. At high pH, all AA incorporating terpolymer solutions with SDS are strongly shear thinning, but at pH 3-4 the systems of terpolymers with SDS are strongly shear thickening at low shear, followed by a shear-thinning region at high shear. These results are explained in terms of surfactant-mediated network formation with polymer coil expansion and hydrogen bonding between partially ionized AA groups as additional factors.     

Study of the adsorption of sodium dodecyl sulfate (SDS) at the air/water interface: targeting the sulfate headgroup using vibrational sum frequency spectroscopy

The surface sensitive technique vibrational sum frequency spectroscopy (VSFS), has been used to study the adsorption behaviour of SDS to the liquid/vapour interface of aqueous solutions, specifically targeting the sulfate headgroup stretches. In the spectral region extending from 980 to 1850 cm(-1), only the vibrations due to the SO(3) group were detectable. The fitted amplitudes for the symmetric SO(3) stretch observed at 1070 cm(-1) for the polarization combinations ssp and ppp, were seen to follow the adsorption isotherm calculated from surface tension measurements. The orientation of the sulfate headgroup in the concentration range spanning from 1.0 mM to above the critical micellar concentration (c.m.c.) was observed to remain constant within experimental error, with the pseudo-C(3) axis close to the surface normal. Furthermore, the effect of increasing amounts of sodium chloride at SDS concentrations above c.m.c. was also studied, showing an increase of approximately 12% in the fitted amplitude for the symmetric SO(3) stretch when increasing the ionic strength from 0 to 300 mM NaCl. Interestingly, the orientation of the SDS headgroup was also observed to remain constant within this concentration range and identical to the case without NaCl.     

Surfactant-induced Marangoni eddies alter the coffee-rings of evaporating colloidal drops

The influence of the small ionic surfactant sodium dodecyl sulfate (SDS) on the evaporation of drying colloidal droplets is quantitatively investigated. The addition of SDS leads to a significantly more uniform deposition of colloidal particles after evaporation (i.e., the so-called "coffee-ring effect" is dramatically altered). We understand this phenomenon in the context of circulating radial Marangoni flows induced by the variation of SDS concentration along the air-water interface. Video microscopy permits the direct visualization of the colloidal particles involved in these flows, revealing a surprisingly stable "Marangoni eddy" that prevents particle deposition at the drop perimeter.     

Polystyrene latices containing dodecanamide‐modified poly(propyleneimine) dendrimers

Polymerization of styrene in aqueous dispersions of the dodecanamide derivative of poly(propyleneimine) dendrimer DAB‐dendr‐(NH₂)₆₄ and sodium dodecyl sulfate (SDS) produced stable latices. With initial SDS concentrations of 10 mM or less, molar ratios of SDS to dendrimer end groups ranging from 2.3:1 to 9.5:1, and less than 10 wt % of SDS relative to styrene, the polystyrene latices had diameters of 30–60 nm and coefficients of variation of diameters of less than 10% when measured by transmission electron microscopy. Higher concentrations of SDS gave more polydisperse latices. The polystyrene latices formed with SDS and the dodecanamide‐modified dendrimer were almost the same size and polydispersity as those formed with SDS and the parent primary amine dendrimer DAB‐dendr‐(NH₂)₆₄. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 597–605, 2003     

Air-liquid interfaces of aqueous solutions containing ammonium and sulfate: spectroscopic and molecular dynamics studies

Investigations of the air-liquid interface of aqueous salt solutions containing ammonium (NH(4)(+)) and sulfate (SO(4)(2-)) ions were carried out using molecular dynamics simulations and vibrational sum frequency generation spectroscopy. The molecular dynamics simulations show that the predominant effect of SO(4)(2-) ions, which are strongly repelled from the surface, is to increase the thickness of the interfacial region. The vibrational spectra reported are in the O-H stretching region of liquid water. Isotropic Raman and ATR-FTIR (attenuated total reflection Fourier transform infrared) spectroscopies were used to study the effect of ammonium and sulfate ions on the bulk structure of water, whereas surface sum frequency generation spectroscopy was used to study the effect of these ions on the interfacial structure of water. Analysis of the interfacial and bulk vibrational spectra reveal that aqueous solutions containing SO(4)(2-) perturb the interfacial water structure differently than the bulk and, consistent with the molecular dynamics simulations, reveal an increase in the thickness of the interfacial region.     

Uptake and surface reaction of methanol by sulfuric acid solutions investigated by vibrational sum frequency generation and Raman spectroscopies

The uptake of methanol at the air-liquid interface of 0-96.5 wt % sulfuric acid (H2SO4) solutions has been observed directly using vibrational sum frequency generation (VSFG) spectroscopy. As the concentration of H2SO4 increases, the VSFG spectra reveal a surface reaction between methanol and H2SO4 to form methyl hydrogen sulfate. The surface is saturated with the methyl species after 15 min. The uptake of methyl species into the solutions by Raman spectroscopy was also observed and occurred on a much longer time scale. This suggests that uptake of methanol by sulfuric acid solutions is diffusion-limited.     

Functionalization of glassy carbon with diazonium salts in ionic liquids

The paper reports on the chemical functionalization of glassy carbon electrodes with 4-bromobenzene (4-BBDT) and 4-(4'-nitrophenylazo)benzene diazonium tetrafluoroborate (4-NAB) salts in ionic liquids. The reaction was carried out at room temperature in air without any external electrical bias in either hydrophobic (1-butyl-3-methylimidazolium hexafluorophosphate) or hydrophilic (1-butyl-3-methylimidazolium methyl sulfate) ionic liquids. The resulting surfaces were characterized using X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and electrochemical measurements. Electrochemical reduction of the terminal nitro groups allowed the determination of surface coverage and formation of an amine-terminated carbon surfaces. The results were compared to glassy carbon chemically modified in an aqueous solution in the presence of 1% sodium dodecyl sulfate (SDS) with the same diazonium salt. Furthermore, Raman spectroscopy coupled with electrochemical measurements allowed to distinguish between the reduction of -NO2 to -NH2 group and the -N=N- to -NH-NH- bond.     

Encapsulation of uncharged water-insoluble organic substance in polymeric membrane capsules via layer-by-layer approach

We report a general and versatile method for the encapsulation of electrically uncharged organic substance in polymeric capsules by using a layer-by-layer (LbL) approach. Electrical charge was induced on the surface of pyrene (uncharged organic substance) with an amphiphilic surfactant (sodium dodecyl sulfate, SDS) by micellar solubilization. The SDS micellar solution of pyrene in water was then deposited on a flat substrate as well as colloidal particles with chitosan as an oppositely charged polyelectrolyte. Pyrene was used as a model drug because it displayed intrinsic fluorescence that allowed us to monitor LbL growth by fluorescence and under confocal laser scanning microscopy (CLSM). To examine the proof of concept, multilayers were coated on the planar support by the LbL method. UV-vis spectroscopy showed regular growth of each layer deposited. Thin film formation was evidenced by scanning electron microscopy. The LbL method was extended to particles where fluorescence spectroscopy revealed LbL growth and transmission electron microscopy (TEM) provided evidence of particle coating. The quantification of dye in each deposited layer further proved LbL growth. The removal of sacrificial core provided thin capsules. The capsules were characterized by TEM and CLSM. The capsules showed potential as a drug delivery system, which is suggested by the slow release of entrapped dye by concentration-dependent diffusion in isotonic saline solution. The kinetics of desorption of pyrene from this thin film was modeled by a pseudo-second-order model.     

纳米MnO2的制备及其电化学性能研究

加入不同浓度的十二烷基磺酸钠表面活性剂(SDS)改变微乳液溶液介质,用苯胺还原高锰酸钾,制备了不同颗粒大小的纳米片状MnO2材料.采用X射线粉末衍射、氮吸附比表面测试和扫描电镜及透射电镜表征观察合成材料.电化学测试表明,0.20 mol·L-1SDS所合成的纳米MnO2比表面约为228.2 m2·g-1,在1mol·L-1Li2SO4电解液中,该电极比电容达到237 F·g-1(0.1 A·g-1),350℃煅烧MnO2电极还可发生可逆Li+嵌脱反应增加其比电容.     

Deposition of polymer latices on grafted Nylon 6 fiber

Deposition of polymer latices on a grafted Nylon 6 fiber was studied as a function of pH and the degree of grafting. The latices were polystyrene (PS), styrene/acrylamide copolymer (P(St/AAm)) and styrene/acrylic acid copolymer (P(St/AA)). The deposition of the latices on the grafted fiber decreased in every case with increasing pH and no deposition was observed at alkaline pH. The grafting of fiber with acrylic and methacrylic acid reduced the deposition of P(St/AAm) and P(St/AA) latices but had no influence on the deposition of PS latex. The relation between the deposition rates and the interaction energy at acidic pH indicates that the deposition of PS latex on the grafted fiber mainly depends on the electrostatic interaction. These results suggest that the expansion of water-soluble polyelectrolyte layer on the surface of grafted fiber plays an important role on the deposition.     

Vibrational Spectroscopy Study of Selenate and Sulfate Adsorption Mechanisms on Fe and Al (Hydr)oxide Surfaces

The coordination and speciation of selenate (SeO(4)) and sulfate (SO(4)) on goethite and Al oxide were studied using Raman and ATR-FTIR spectroscopy. Raman spectra were collected from pastes of suspensions containing 4 mM SeO(4) or SO(4). For SO(4), complementary data were collected by ATR-FTIR spectroscopy in goethite systems with 1 mM SO(4) and in Al oxide systems with 4 mM SO(4). The combined data set of Raman and ATR-FTIR spectra indicate that both inner- and outer-sphere surface complexes of SeO(4) and SO(4) occur on these metal (hydr)oxide surfaces. These spectral data show that SeO(4) and SO(4) have a similar complexation behavior on the same adsorbent. On goethite, these form predominantly monodentate inner-sphere surface complexes at pH <6, while at pH >6 these anions exist predominantly as outer-sphere surface complexes. On Al oxide, in contrast, these anions exist predominantly as outer-sphere surface complexes, but a small fraction is also present as an inner-sphere complex at pH <6. A comparison of the spectral intensities of these anions on goethite and Al oxide shows that complexation of these anions with Al oxide is weaker than with Fe oxide. Copyright 2000 Academic Press.     

Phase transitions and surface morphology of surfactant-coated aerosol particles

Probe molecule spectroscopy and hygroscopic growth curves characterize the morphology of surfactant-coated aerosol particles as a function of relative humidity (RH). This study focuses on particles composed of either potassium iodide or sodium chloride and sodium dodecyl sulfate (SDS). At high RH, these mixed particles assume a reverse micelle type structure, and at low RH, they comprise a solid core of either KI or NaCl coated with SDS and water. The deliquescence relative humidity (DRH) and efflorescence relative humidity (ERH) of the inorganic fraction of the mixed particles are very similar to those of the pure salts. The surface polarity and morphology sampled by the coumarin 314 probe molecule ranges from that of a water-organic interface to that of an ionic surface and depends strongly on the RH and the amount of SDS. When the SDS coverage of the droplet just prior to efflorescence reaches approximately one monolayer, a thin soap film persists on the surface to values of RH much lower than the ERH. Both the electronic spectroscopy and photoelectric charging efficiency show a separate efflorescence for this layer at RH < 5%. The spectroscopy further reveals that there is a hysteresis associated with this low RH phase transition for both KI and NaCl cores.     

表面活性剂对制备MoO2纳米微粉的影响

Using polyvinyl alcohol(PVA)and sodium dodecyl sulfate(SDS)as the surfactants respectively,nano-size amorphous molybdenum dioxide powders were prepared by γ-radiation method at ambient pressure and room temperature,and the products were characterized by use of laser Raman spectra(LRS)、 X-ray powder diffraction(XRD)and transmisson electron micrograph(TEM).The experimental results reveal that the relative pure samples can be obtained using PVA as surfactant,and the average particle size is about 10nm,but using SDS as surfactant,the samples with the average particle size 30nm are a mixture of MoO2 and MoO3.This suggestes PVA is prior to SDS in the preparation of nano-sized amorphous molybdenum dioxide powders by γ-radiation method.     

表面活性剂对制备MoS2纳米微粉的影响

Mo0_2纳米微粉在催化l‘l、敏感元件［‘·’］及磁记录材料［‘］等方面具有特殊用途,其传统制备方法是通过在高温下用氢还原l’,‘l,利用这种方法制备M。0。纳米微粉、所得产品粒子尺寸较大,比表面积小,且反应在条件苛刻,从而限制了M00。纳米微粉的使用范围．文献曾报导用y一辐照法制备了一系列金属、合金和氧化物的纳米粒子”－‘Q’,这种方法利用水辐解产生的水合电子（efo）作为还原剂,具有在常温常压下进行操作的显著优点,因而受到普遍关注．本实验室l‘’1曾报导通过v一辐照法可制备Moo。纳米非晶,其颗粒尺寸为8－30urn…     

The effect of acrylic acid amount on the colloidal properties of polystyrene latex

Poly(styrene-co-acrylic acid) (St/AA) latices were prepared by using a batch soap-free emulsion copolymerisation in non-buffered medium. Polymerisation kinetics, followed by gravimetric method, revealed that increasing AA comonomer concentration was directly proportional to the copolymerisation rate, while adding AA comonomer caused a strong decrease of particle size of final St/AA latex particle without affecting the size distribution. Transmission electron microscopy indicated that the particles were monodispersed and spherical in shape irrespective of AA amount used in the investigated range. The colloidal stability of the latices was increased upon increasing the AA concentration; owing to the electrosteric stabilisation originated from AA-rich layer on the particle surface. In addition, electrophoretic mobility of formed particles versus polymerisation conversion exhibited the constancy of the surface charge density during the polymerisation process and was inferred for discussion of the polymerisation mechanism of this system.     

Competition between DPPC and SDS at the air-aqueous interface

Vibrational sum frequency generation spectroscopy is used to study the interactions of the charged soluble organic surfactant sodium dodecyl sulfate (SDS) with an insoluble 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) monolayer at the air-aqueous interface. Results indicate that the surfactant species compete for surface sites in the mixed system, with a lower monolayer number density of DPPC molecules being observed in the presence of dodecyl sulfate anions at the interface. Spectroscopic results also indicate that fewer dodecyl sulfate chains reside at the interface when the insoluble DPPC film is present. Increased conformational ordering of the acyl chains of both the DPPC molecules and the interfacial dodecyl sulfate anions is observed in the mixed system. Additionally, charged surfactant SDS promotes the alignment of the interfacial water molecules even in the presence of a DPPC monolayer.