Synthesis and characterization of fluorinated polyimides for pervaporation of n-heptane/thiophene mixtures

Soluble fluoro-polyimides have been synthesized by reacting of a fluorine-containing aromatic dianhydride, 2,2′-bis(3,4-dicarboxyphenyl)hexafluoropropane dianhydride, with aromatic diamine to yield poly(amic acid)s which were then cyclized to yield polyimide by chemical imidization method. The polyimides have excellent solubility both in strong bipolar solvents, such as NMP and DMAc, and in common organic solvents, such as THF and dioxane, etc. The glass transition temperature of these polyimides were determined by DSC and ranged from 281 to 289 °C. Thermogravimetric analysis indicated that these polyimides have good thermal stability with initial thermal decomposition temperature of 520-526 °C. The polyimide asymmetric membranes were prepared by phase inversion method and the inner structure was observed by method of SEM. The pervaporation properties of the prepared polyimides asymmetric membranes for n-heptane/thiophene mixtures were investigated at 40-77 °C and the permeation flux and the sulfur enrichment factor of the polyimide membranes are in the range of 0.56-1.68 kg/m² h and 3.12-2.24, respectively. The result demonstrated that the pervaporation method could be very effective method for desulfurization by polyimides asymmetric membranes with ultrathin skin.     

Remarkable reduction of irreversible fouling and improvement of the permeation properties of poly(ether sulfone) ultrafiltration membranes by blending with pluronic F127

Hydrophilic modification of ultrafiltration membranes was achieved through blending of Pluronic F127 with poly(ether sulfone) (PES). The chemical composition and morphology changes of the membrane surface were confirmed by water contact angle, X-ray photoelectron spectroscopy, scanning electron microscopy, and protein adsorption measurements. The decreased static water contact angle with an increase in the Pluronic F127 content indicated an increase of surface hydrophilicity. XPS analysis revealed enrichment of PEO segments of Pluronic F127 at the membrane surface. The apparent protein adsorption amount decreased significantly from 56.2 to 0 microg/cm(2) when the Pluronic F127 content varied from 0% to 10.5%, which indicated that the blend membrane had an excellent ability to resist protein adsorption. The ultrafiltration experiments revealed that the Pluronic F127 content had little influence on the protein rejection ratio and pure water flux. Most importantly, at a high Pluronic F127 content membrane fouling, especially irreversible fouling, has been remarkably reduced. The flux recoveries of blend membranes reached as high as 90% after periodic cleaning in three cycles.     

Pervaporation performance of PDMS-NiY zeolite hybrid membranes in the desulfurization of gasoline

PDMS-Ni²⁺Y zeolite hybrid membranes were fabricated and used for the pervaporation removal of thiophene from model gasoline system. The structural morphology, mechanical stability, crystallinity, and free volume characteristics of the hybrid membranes were systematically investigated. Molecular dynamics simulation was employed to calculate the diffusion coefficients of small penetrants in the polymer matrix and the zeolite. The effect of Ni²⁺Y zeolite content on pervaporation performance was evaluated experimentally. With the increase of Ni²⁺Y zeolite content, the permeation flux increased continuously, while the enrichment factor first increased and then decreased possibly due to the occurrence of defective voids within organic–inorganic interface region. The PDMS membrane containing 5.0 wt% Ni²⁺Y zeolite exhibited the highest enrichment factor (4.84) with a permeation flux of 3.26 kg/(m² h) for 500 ppm sulfur in feed at 30 °C. The effects of operating conditions on the pervaporation performance were investigated in detail. It has been found that the interfacial morphology strongly influenced the separation performance of the hybrid membrane, and it was of great significance to rationally modify the interfacial region in order to improve the organic–inorganic compatibility.     

Probing molecular-level surface structures of polyethersulfone/pluronic F127 blends using sum-frequency generation vibrational spectroscopy

We blended Pluronic F127 into polyethersulfone (PES) to improve surface properties of PES, which has been extensively used in biomaterial and other applications. The molecular surface structures of PES/Pluronic F127 blends have been investigated by sum-frequency generation (SFG) vibrational spectroscopy. The molecular orientation of surface functional groups of PES changed significantly when blended with a small amount of Pluornic F127. Pluronic F127 on the blend surface also exhibited different features upon contacting with water. The entanglement of PES chains with Pluronic F127 molecules rendered the blends with long-term surface stability in water in contrast to the situation where a layer of Pluronic F127 adsorbed on the PES surface. Atomic force microscopy (AFM) and quartz crystal microbalance (QCM) measurements were included to determine the relative amount of protein that adsorbed to the blend surfaces. The results showed a decreased protein adsorption amount with increasing Pluronic F127 bulk concentration. The correlations between polymer surface properties and detailed molecular structures obtained by SFG would provide insight into the designing and developing of biomedical polymers and functional membranes with improved fouling-resistant properties.     

Chitosan/poly(tetrafluoroethylene) composite membranes using in pervaporation dehydration processes

Chitosan/PTFE composite membranes were prepared from casting a γ-(glycidyloxypropyl)trimethoxysilane (GPTMS)-containing chitosan solution on poly(styrene sulfuric acid) grafted expended poly(tetrafluoroethylene) film surface. The adhesion between the chitosan skin layer and the PTFE substrate was pretty good to warrant the high performance of chitosan/PTFE composite membranes using in pervaporation dehydration processes on isopropanol. The chitosan/PTFE membrane exhibited a permeation flux of 1730 g/m² h and a separation factor of 775 at 70 °C on pervaporation dehydration of a 70 wt% isopropanol aqueous solution. The membrane also survived after a long-term operation test in 45 days.     

Multicomponent pervaporation process for volatile aroma compounds recovery from pomegranate juice

The present work describes the possibility of using pervaporation process to recover the pomegranate aroma compounds from an actual pomegranate juice and a model aroma solution. Four different chemicals representing four major kinds of aroma compounds, namely, 3-methyl butanal, isopentyl acetate, n-hexanol and α-ionone, were utilized in this work. Three POMS membranes and two PDMS membranes were tested for pervaporation and compared for their separation performance. The influence of various operating parameters such as feed flow rate, feed temperature and permeate pressure on the permeation flux and aroma compounds enrichment factor was investigated. Feed flow rate was shown to have no significant effect on both total flux and aroma enrichment factor, whereas feed temperature and permeate pressure had highly significant effects. An increase in feed temperature led to higher flux and enrichment factor. As permeate pressure increased, the flux and enrichment factor of some aroma compounds decreased. Some of the aroma compounds showed higher enrichment factor at higher permeate pressures. Finally, the activation energy of permeation and the membrane permeability for each aroma compound were determined.     

Pervaporation performance of crosslinked polydimethylsiloxane membranes for deep desulfurization of FCC gasoline: I. Effect of different sulfur species

Crosslinked PDMS/PEI composite membranes were prepared, in which asymmetric PEI membrane prepared with phase inversion method was acted as the microporous supporting layer in the flat-plate composite membrane. The different function composition of the PDMS/PEI composite membranes were characterized by reflection FTIR. The surface and section of PDMS/PEI composite membranes were investigated by scanning electron microscope (SEM). The infinite dilute activity and diffusion coefficients of thiophene, 2-methyl thiophene, 2,5-dimethyl thiophene, n-butyl mercaptan, n-butyl sulfide in crosslinked PDMS were measured in the temperature range of 80–100 °C by inverse gas chromatography. The solubility parameters of thiophene, 2-methyl thiophene, 2,5-dimethyl thiophene, n-butyl mercaptan, n-butyl sulfide were calculated by the group contribution method and the selectivity of PDMS composite membrane for different organic sulfur compounds was investigated. The composite membranes prepared in this work were employed in pervaporation separation of n-heptane and different sulfur forms mixtures. The theoretical results showed good agreement with the experimental results, and the order of partial permeate flux and selectivity for different organic sulfur compounds was: thiophene > 2-methylthiophene > 2,5-dimethylthiophene > n-butyl mercaptan > n-butyl sulfide, which should be significant for practical application.     

Modification of polyethersulfone ultrafiltration membranes with phosphorylcholine copolymer can remarkably improve the antifouling and permeation properties

The synthesized phosphorylcholine copolymer composed of 2-methacryloyloxyethylphosphorylcholine (MPC) and n-butyl methacrylate (BMA), blended with polyethersulfone (PES), was used to fabricate antifouling ultrafiltration membranes. Water contact angle measurements confirmed that the hydrophilicity of the MPC-modified PES membranes was enhanced to certain extent. X-ray photoelectron spectroscopy (XPS) analysis verified the substantial enrichment of MPC at the surface of the MPC-modified PES membranes. The adsorption experiments indicated that the adsorption amounts of bovine serum albumin (BSA) on the MPC-modified PES membranes were dramatically decreased in comparison with the control PES membrane. Ultrafiltration experiments were carried out to investigate the effect of MPC modification on the antifouling and permeation properties of the PES membranes, it was found that the rejection ratio of BSA was decreased, the flux recovery ratio was remarkably increased, and the degree of irreversible fouling decreased from 0.46 to 0.09. In addition, the MPC-modified PES membranes could run several cycles without substantial flux loss.     

Preparation and characterisation of novel polysulfone membranes modified with Pluronic F-127 for reducing microalgal fouling

In this study, hydrophilic and fouling-resistant polysulfone (PS) membranes were fabricated using the phase inversion method to reduce membrane fouling caused by microalgal culture. The Pluronic F-127 polymer, which is used as a hydrophilic co-polymer, was added to the membranes to improve the membrane properties. Characteristic specifications of the fabricated membranes, such as morphology, surface roughness, chemical structures and hydrophobicity/hydrophilicity, were studied using scanning electron microscopy, atomic force microscopy (AFM), energy-dispersive X-ray spectroscopy (EDS), attenuated total reflection-fourier infrared (ATR-FTIR) spectroscopy and contact angle devices. According to the results obtained, it was observed that, with the increase of the Pluronic F-127 concentration in the membranes, the surface roughness of the membranes decreased and hydrophilicity and permeation fluxes increased notably. Furthermore, it was observed that the addition of the Pluronic F-127 polymer into the membranes reduced reversible/irreversible membrane fouling. Additionally, a characterisation of the fouled membranes was performed for the purpose of comprehensively understanding the membrane fouling mechanism caused by microalgal culture.     

Composite membranes prepared from glutaraldehyde cross-linked sulfonated cardo polyetherketone and its blends for the dehydration of acetic acid by pervaporation

Cardo polyetherketone (PEK-C) composite membranes were prepared by casting glutaraldehyde (GA) cross-linked sulfonated cardo polyetherketone (SPEK-C) or silicotungstic acid (STA) filled SPEK-C and poly(vinyl alcohol) (PVA) blending onto a PEK-C substrate. The compatibility between the active layer and PEK-C substrate is improved by immersing the PEK-C substrate in a GA cross-linked sodium alginate (NaAlg) solution and using water–dimethyl sulfoxide (DMSO) as a co-solvent for preparing the STA-PVA-SPEK-C/GA active layer. The pervaporation (PV) dehydration of acetic acid shows that permeation flux decreased and separation factor increased with increasing GA content in the homogeneous membranes. The permeation flux achieved a minimum and the separation factor a maximum when the GA content increased to a certain amount. Thereafter the permeation flux increased and the separation factor decreased with further increasing the GA content. The PV performance of the composite membranes is superior to that of the homogeneous membranes when the feed water content is below 25 wt%. The permeation activation energy of the composite membranes is lower than that of the homogeneous membranes in the PV dehydration of 10 wt% water in acetic acid. The STA-PVA-SPEK-C-GA/PEK-C composite membrane using water–DMSO as co-solvent has an excellent separation performance with a flux of 592 g m⁻² h⁻¹ and a separation factor of 91.2 at a feed water content of 10 wt% at 50 °C.     

Protein-adsorption-resistance and permeation property of polyethersulfone and soybean phosphatidylcholine blend ultrafiltration membranes

Novel ultrafiltration membranes were prepared by simple blending of polyethersulfone (PES) and soybean phosphatidylcholine (SPC). X-ray photoelectron spectroscopy (XPS) and water contact angle measurements indicated SPC enrichment at the membrane surfaces. The immobilization and arrangement of PC groups at surfaces rendered the membranes more hydrophilic. BSA adsorption amount decreased from 56.2 μg/cm² for SPC-free PES membrane to 2.4 μg/cm² for PES/SPC blend membrane. The fouling-resistant property of the blend membranes was improved considerably with an increase of SPC content while the pure water permeation flux decreased remarkably. Using PEG/PVP mixture instead of PEG as pore-forming agent increased pure water flux of PES/SPC blend membrane to some extent.     

Studies on polyethylene glycol/polyethersulfone composite membranes for FCC gasoline desulphurization by pervaporation

A polyethylene glycol (PEG)/polyethersulfone (PES) composite membrane that can be applied on a commercial (or scale up) plant for fluid catalytic cracking (FCC) gasoline desulphurization was prepared through pre-wetting combined with double-layer coating methodology. Preparation methodology, morphologies characterization and performance test for the composite membranes were conducted. The results indicated that the pre-wetting method effectively confined the intrusion of PEG solution to porous PES support layer in coating process. The composite membrane had a clear-cut boundary surface between the dense active layer and the porous support layer, which was examined by scanning electron microscope (SEM). Pervaporation (PV) experiments indicated that the membrane, with the crosslinking agent amount of 17% and solids content in active layer solution of 16%, had a stable performance for FCC desulphurization. The sulphur enrichment factor came to 3.63, and the total permeation flux was 3.37 kg/m² h. It was found that the PV performance of the composite membrane changed slightly when the thickness of active layer varied from 4.25 μm to 33.26 μm.     

Sorption and transport behavior of gasoline components in polyethylene glycol membranes

Desulphurization mechanism of polyethylene glycol (PEG) membranes has been investigated by the study of solubility and diffusion behavior of typical gasoline components through PEG membranes with various crosslinking degrees. The sorption, diffusion and permeation coefficients were calculated by the systematic studies of dynamic sorption curves of gasoline components such as thiophene, n-heptane, cyclohexane, cyclohexene and toluene in PEG membranes. Furthermore, the temperature dependence of diffusion and solubility coefficients and the influence of crosslinking degree on sorption and diffusion behaviors were conducted to elucidate the mass-transfer mechanism. According to the discussions on dynamic sorption curves, transport mode, activation energy and thermodynamic parameters, thiophene species were the preferential permeation components. Crosslinking is an effective modification way to improve the overall performance of PEG membranes applied in gasoline desulphurization. The pervaporation (PV) and gas chromatography (GC) experiments results corresponded to the conclusions. All these investigations will provide helpful suggestions for the newly emerged membrane desulphurization technology and complex organic mixture separation by pervaporation.     

Anti-trade-off in dehydration of ethanol by novel PVA/APTEOS hybrid membranes

Novel organic–inorganic hybrid membranes were prepared through sol–gel reaction of poly(vinyl alcohol) (PVA) with γ-aminopropyl-triethoxysilane (APTEOS) for pervaporation (PV) separation of ethanol/water mixtures. The membranes were characterized by FTIR, EDX, WXRD and PALS. The amorphous region of the hybrid membranes increased with increasing APTEOS content, and both the free volume and the hydrophilicity of the hybrid membranes increased when APTEOS content was less than 5 wt%. The swelling degree of the hybrid membranes has been restrained in an aqueous solution owing to the formation of hydrogen and covalent bonds in the membrane matrix. Permeation flux increased remarkably with APTEOS content increasing, and water permselectivity increased at the same time, the trade-off between the permeation flux and water permselectivity of the hybrid membranes was broken. The sorption selectivity increased with increasing temperature, and decreased with increasing water content. In addition, the diffusion selectivity and diffusion coefficient of the permeants through the hybrid membranes were investigated. The hybrid membrane containing 5 wt% APTEOS has highest separation factor of 536.7 at 50 °C and permeation flux of 0.0355 kg m⁻² h⁻¹ in PV separation of 5 wt% water in the feed.     

Polyamide-imide/polyetherimide dual-layer hollow fiber membranes for pervaporation dehydration of C1–C4 alcohols

To circumvent the common swelling and deteriorated performance of integral asymmetric hollow fiber membranes for pervaporation dehydration, we have developed novel polyamide-imide (PAI)/polyetherimide (PEI) hollow fiber membranes with synergized performance with the aid of dual-layer spinning technology. Dehydration of C1–C4 alcohols has been conducted and the orders of their fluxes and permeances have been analyzed. The hollow fibers spun at 2 cm air gap and annealed at 75 °C exhibit the highest pervaporation performance: separation factors for t-butanol/water and iso-butanol/water binary systems are greater than 50,000 with flux more than 700 g/m² h. A comparison with literature data shows that the newly developed membranes outperform most other polymeric membranes for the dehydration of IPA and butanols. The dual-layer hollow fiber membranes also exhibit good long-term stability up to 200 h. The superior performance can be attributed to (1) the balanced properties of PAI as the selective layer for dehydration pervaporation; (2) the low water uptake and less swelling characteristic of the PEI supporting layer; and (3) the desirable membrane morphology consisting of a fully porous inner layer, a porous interface, and an ultrathin dense-selective outer skin.     

Effect of physicochemical conditions on the ultrafiltration of β-lactoglobulin: Fluorescence probing of induced structural changes

This work aims for determining the impact of different environmental conditions, such as pH, ionic strength (salt concentration) and the chemistry of the membrane surface (hydrophilic/hydrophobic character) on the structure of permeating proteins after ultrafiltration. In the permeation experiments reported in this paper, different solutions of a model protein – β-lactoglobulin – at pH 3, 5 and 8 and salt concentrations of 1, 10 and 100 mM were processed with membranes of different molecular weight cut-off (10 and 30 kDa) and materials (regenerated cellulose—RC, and polyethersulfone—PES).     

Dehydration of tetrafluoropropanol (TFP) by pervaporation via novel PBI/BTDA-TDI/MDI co-polyimide (P84) dual-layer hollow fiber membranes

A novel PBI/P84 co-polyimide dual-layer hollow fiber membrane has been specifically fabricated through the dry-jet wet phase inversion process, for the first time, for the dehydration pervaporation of tetrafluoropropanol (TFP). Polybenzimidazole (PBI) was chosen as the outer selective layer because of its superior hydrophilic nature and excellent solvent-resistance together with robust thermal stability, while P84 co-polyimide was employed as the inner supporting layer because of its good solvent-resistance and thermal stability. The PBI/P84 membrane exhibits superior water selectivity and relatively high permeation flux. At 60 °C, the PBI/P84 dual-layer hollow fiber membrane shows a permeation flux of 332 g/(m² h) and a separation factor of 1990 for a feed solution containing of 85 wt% TFP. The preferential water sorption and the significant diffusivity difference between TFP and water are the main causes of high separation factor. However, an increase in feed temperature will greatly increase the permeation flux but seriously decrease the water selectivity. The activation energy data verify that water can preferentially permeate the PBI membrane due to the strong water affinity of PBI and a much smaller molecular size of water.     

Composite poly(vinyl alcohol)–poly(sulfone) membranes crosslinked by trimesoyl chloride: Characterization and dehydration of ethylene glycol–water mixtures

Composite membranes prepared from poly(vinyl alcohol) and poly(sulfone) were crosslinked with trimesoyl chloride (TMC) solutions. The degree of crosslinking, crystallinity, surface roughness and hydrophobicity of the crosslinked PVA–PSf membranes were determined from attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), X-ray diffraction (XRD), atomic force microscopy (AFM) and contact angle measurements, respectively. Results showed a consistent trend of changes in the physicochemical properties: the degree of crosslinking, crystallinity, surface roughness, hydrophobicity and swelling degree all decrease with increasing crosslinking agent (TMC) concentration and reaction time. The crosslinked membrane performance was assessed with pervaporation dehydration of ethylene glycol solutions at a range of concentrations (30–90 wt% EG) in the feed mixtures. The total flux of permeation was found to decrease, while the selectivity to increase, with increasing TMC concentration and reaction time. The decrease in flux was most prominent at low EG concentrations in the feed mixtures. In addition, the temperature effect on the pervaporation dehydration was investigated in relation to solution–diffusion mechanisms.     

Effect of chemical structures of amines on physicochemical properties of active layers and dehydration of isopropanol through interfacially polymerized thin-film composite membranes

Effect of chemical structures of amines on the performance of isopropanol dehydration by pervaporation through the polyamide thin-film composite membranes prepared by various amines reacting with TMC on the surfaces of the modified asymmetric polyacrylonitrile (mPAN) membranes was investigated. ATR-FTIR, SEM, AFM and water contact angle were used to characterize the chemical structures, morphologies and hydrophilicity of the polyamide active layers of the composite membranes. To investigate the correlation between the free volume of polyamide active layer and pervaporation performance, the free volume variation of the polyamide active layers was probed by positron annihilation spectroscopy (PAS) experiments performed using the slow positron beam. It was found that the pervaporation performance for separating 90 wt.% aqueous isopropanol solutions at 25 °C decreased in the order of EDA–TMC/mPAN membrane > MPDA–TMC/mPAN membrane > PIP–TMC/mPAN and HDA–TMC/mPAN membranes. The relationship between the performance of isopropanol dehydration and the physicochemical properties of the polyamide layers, that is, the free volume, surface roughness and hydrophilicity seemed very well.     

The effect of heat treatment of PES and PVDF ultrafiltration membranes on morphology and performance for milk filtration

The flat sheet polyethersulfone (PES) and poly(vinylidene fluoride) (PVDF) membranes were prepared by immersion precipitation technique. The influence of hot air and water treatment on morphology and performance of membranes were investigated. The membranes were characterized by AFM, SEM, cross-flow filtration of milk and fouling analysis. The PES membrane turns to a denser structure with thick skin layer by air treatment at various temperatures during different times. This diminishes the pure water flux (PWF). However the milk permeation flux (MPF) was considerably improved at 100 °C air treatment for 20 min with no change in protein rejection. The smooth surface and slight decrease in surface pore size for air treated PES membrane at 100 °C compared to untreated membrane may cause this behavior for the membrane. The water treatment of PES membranes at 55 and 75 °C declines the PWF and MPF and increases the protein rejection. This is due to slight decrease in membrane surface pore size. The treatment of PES membrane with water at higher temperature results in a porous structure with superior performance. The fouling analysis of 20 min treated membrane indicates that the surface properties of 100 °C air treated and 95 °C water treated PES membranes are improved compared to untreated membrane. The SEM observation depicts that the morphology of air and water treated PVDF membranes was denser and smoother with increasing the heat treatment temperature. The 20 min air treated PVDF membranes at 100 °C and water treated at 95 °C exhibited the highest performance and antifouling properties.