Y-shaped block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide) synthesized by ATRP

Novel Y-shaped block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide),PEG-b-(PNIPAM)_2,were successfully synthesized through atom transfer radical polymerization(ATRP).A difunctional macroinitiator was prepared by esterification of 2,2-dichloroacetyl chloride with poly(ethylene glycol) monomethyl ether(PEG).The copolymers were obtained via the ATRP of N-isopropylacrylamide(NIPAM) at 30℃with CuCl/Me_6TREN as a catalyst system and DMF/H_2O(v/v = 3:1) mixture as solvent.The resulting copo...     

Optical constants of electrochemically synthesized polyindole and poly(5-carboxilic acid indole)

The optical properties and optical constants of the polyindole and poly(5-carboxilic acid indole) conductive polymers synthesized and doped electrochemically with ClO ₄ ^? in acetonitrile solution were investigated by means of transmittance and reflectance spectra, in the wavelength range of 300–800 nm. Absorption band centered at 425 nm assigned to the direct allowed electron transition (π → π*) from valence band to the conduction band. The optical band gap, E _g , was determined out of the optical absorption spectra. The E _g increases from 2.17 eV for polyindole film to 2.40 eV for poly(5-carboxilic acid indole) polymer thin film, which is attributed to the effect of electron withdrawing carboxylic acid functional group on the growth of chain length of the polymer during the electropolymerization. The oscillator energy E ₀, dispersion energy E _d and other parameters were determined by the Wemple-DiDomenico method.     

Block copolymers of poly(ethylene oxide) and poly(vinyl alcohol) synthesized by the RAFT methodology

A methodology for the synthesis of well‐defined poly(ethylene oxide)‐block‐poly(vinyl alcohol) (PEO‐b‐PVA) and PVA‐b‐PEO‐b‐PVA polymers was reported. Novel xanthate end‐functionalized PEOs were synthesized by a series of end‐group transformations. They were then used to mediate the reversible addition–fragmentation chain transfer polymerization of vinyl acetate to obtain well‐defined poly(ethylene oxide)‐b‐poly(vinyl acetate) (PEO‐b‐PVAc) and PVAc‐b‐PEO‐b‐PVAc. When these block copolymers were directly hydrolyzed in methanol solution of sodium hydroxide, polymers with brown color were obtained, which was due to the formation of conjugated unsaturated aldehyde structures. To circumvent these side reactions, the xanthate groups were removed by adding a primary amine before hydrolysis and the products thus obtained were white powders. The polymers were characterized by gel permeation chromatography, ¹H NMR spectroscopy and FT‐IR. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1901–1910, 2009     

New poly(amide-imide) siloxane copolymers by polycondensation

Some new poly(amide-imide) siloxane copolymers have been synthesized by solution polycondensation of some aromatic diamines with siloxanic diacids having preformed imide rings. Two polycondensation techniques were used: polycondensation of aromatic diamines with diacid chlorides and direct polycondensation of aromatic diamines with diacids in the presence of organic phosphites, following the Yamazaki-Higashi phosphorylation technique. In all cases the reactions were carried out using equimolecular amounts of the two monomers, in polar aprotic solvents and inert atmosphere.The obtained compounds were characterized by elemental C, H and Si analysis, solubility tests, IR and ¹H-NMR spectrometry. Thermogravimetric curves were also recorded. All data agree with the proposed structures.     

Raman and FTIR spectroscopic characterization of electrochemically synthesized poly(triphenylamine), PTPA

Triphenylamine was electrochemically polymerized in a mixture of toluene and acetonitrile with different electrolyte salts. The poly(triphenylamine) (PTPA) films are insoluble in polar solvents and show high stability and no degradation or loss in electrochemical properties when stored in a laboratory atmosphere. The PTPA films were characterized in situ by FTIR external reflection spectroscopy and by Raman spectroscopy. Electronic Publication     

New architectures of poly(ethylene glycol) and poly(methylthiirane) in block copolymers

Two synthetic ways were experimented to prepare new architectures of block copolymers made of poly(ethylene glycol) (PEG) and poly(methylthiirane). The coupling of both blocks conveniently end-capped as well as anionic polymerization of methylthiirane initiated by PEG-thiols gave readily the copolymers. Their characterization by ¹H NMR, SEC and IR confirmed the expected structures.     

Fluorine-containing poly(carbonate-block-siloxane) copolymers

On the basis of carbofunctional oligo(??,??-bisphenoxy-trifluoropropyl(methyl)siloxanes, bisphenols, and bisphenol A bis(chloroformate), novel fluorine-containing poly(carbonate-block-siloxanes) are synthesized and characterized. The presence of trifluoropropyl groups in siloxane blocks of the copolymers decreases the sorption of hydrocarbons by 4 to 6 wt % instead of the 60 wt % for usual poly(carbonate-block-dimethylsiloxanes). Films based on fluorine-containing poly(carbonate-block-siloxanes) retain their high strength characteristics in the swollen state (??_b = 20 MPa).     

New high-tensile thermally stable copolymers of poly(p-phenylene-1,3,4-oxadiazole)

A one-stage method is developed for the synthesis of new irregular copolymers of poly(p-phenylene-1,3,4-oxadiazole), whose polymer chain contains a 5,5-dioxodibenzothiophenylene fragment. The polymer synthesis is performed through direct copolymerization of terephthalic acid, 5,5-dioxodibenzothiophen-3,7-dicarboxylic acid, and hydrazine sulfate in oleum at an elevated temperature. The introduction of 13.5–17% structural fragments of 5,5-dioxodibenzothiophene into a copolymer macromolecule makes it possible to improve the thermal stability and fire-resistance of fibers and films produced on their basis and to achieve a 30% increase in breaking strength and a fivefold greater breaking extension relative to those values for a homopolymer based on terephthalic acid.     

Study of electrochemically deposited thin poly(N-vinylcarbazole) films

In this paper, the influence of the water content in the acetonitrile/LiClO(4) system on the electrosynthesis and the properties of poly(N-vinylcarbazole), PNVC, films is examined. By using conventional resonant frequency and impedance measurements of an electrochemical quartz crystal microbalance (EQCM), information about the electrochemical, morphological and adhesive properties of the thin conducting films were obtained. By changing the water content of the background electrolyte, the degree of cross-linking (through the vinyl group), the doping level and the morphology of PNVC films vary simultaneously. Two limiting cases of film properties were observed: for less than 10 Vol.% water, a highly doped, porous and cross-linked polymer is synthesized. Above 10 Vol.% water content, a dense and smooth film is deposited. The growth at a constant potential was found to be limited by the diffusion of monomers to the electrode. Films grown from a system containing 20 Vol.% water exhibit better adhesive properties to the substrate than those grown from 2 Vol.% water.     

Synthesis of poly(ester carbonate) copolymers

The synthesis of poly(ester carbonate) copolymers based on bisphenol A, terephthalic acid, and phosgene is reviewed, and a new synthetic route is described leading to polymers which are different from those obtained by methods described in the literature. The most important features of the new method are quantitative incorporation of the dicarboxylic acid into the polymer and absence of undersirable side reactions. Synthesis of the random copolymer in which the dicarboxylic acid and carbonic acid groups are present in about equal molar amounts is discussed. Solution properties, effects of M?_n and copolymer composition on T_g, sequence length distribution, the effect of ester interchange reactions on molecular weight distribution, and effects of monofunctional chain termination on molecular weight of the final product are also discussed.     

Thermal degradation of poly(siloxane-urethane) copolymers

The aim of this study was to investigate the characteristics and mechanism of the degradation of poly(siloxane-urethane) (PSiU) copolymers by thermogravimetric analysis (TGA) and TGA coupled with Fourier-transform infra-red spectroscopy (TG-FTIR). The PSiU copolymers consisted of 4,4′-diphenylmethane diisocyanate (MDI), 1,4-butanediol (1,4-BD), and OH-terminated polydimethylsiloxane (PDMS). In TGA they exhibited a two-stage degradation at 250-650 °C. The two stages of degradation have been found to comprise eight degradation steps and two interchange reactions, as revealed by TG-FTIR analysis. The main decomposition products have been identified as CO₂, tetrahydrofuran, cyclosiloxane, and macrocyclic species. In addition, the effects of hard segment content (HSC) on the degradation and thermal stability of PSiU copolymers have been investigated by means of TG and DTG curves; notably, a stability region at 410-470 °C is caused by the cyclosiloxane, as verified by TG-FTIR.     

Self-assembly of mixtures of block copolymers of poly(styrene-b-acrylic acid) with random copolymers of poly(styrene-co-methacrylic acid)

The effects of the addition of random copolymers of poly(styrene-co-methacrylic acid) [P(S-co-MAA)] on the self-assembly of block copolymers of poly(styrene-b-acrylic acid) (PS-b-PAA) are described. The effects of variation of five factors, including the MAA content, the weight fraction and molar mass of the P(S-co-MAA), the initial concentration of the mixture, and the length of the PAA segment in the block copolymer, were investigated. With increasing MAA content, the localization of the random copolymer in the aggregate changed from the core to the interface, which led to a morphological transition from spheres to vesicles. Vesicles, mixtures of vesicles and large spheres, and large spheres alone were formed with increasing weight fraction of the random copolymer. When the molar mass of the random copolymer was high, both rods and vesicles were observed at low water contents; otherwise, only vesicles were observed. The vesicle size increased (from 100 to 140 nm) with increasing initial polymer concentration, whereas the vesicle membrane thickness remained constant. The size of the vesicles prepared from the mixtures increased with water content but decreased with the length of PAA in the diblock.     

Segmented block copolymers of poly(ethylene glycol) and poly(ethylene terephthalate)

A new series of segmented copolymers were synthesized from poly(ethylene terephthalate) (PET) oligomers and poly(ethylene glycol) (PEG) by a two‐step solution polymerization reaction. PET oligomers were obtained by glycolysis depolymerization. Structural features were defined by infrared and nuclear magnetic resonance (NMR) spectroscopy. The copolymer composition was calculated via ¹H NMR spectroscopy. The content of soft PEG segments was higher than that of hard PET segments. A single glass‐transition temperature was detected for all the synthesized segmented copolymers. This observation was found to be independent of the initial PET‐to‐PEG molar ratio. The molar masses of the copolymers were determined by gel permeation chromatography (GPC). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4448–4457, 2004     

Thermal transition of electrochemically synthesized polyaniline

The thermal stability of polyaniline (PAni) is of great importance in commercial applications. PAni and its emeraldine base form (PAni-EB) were electrochemically synthesized and subjected to thermogravimetric analysis (TGA) in inert atmosphere, which illustrated that the dopant HClO₄ could act as the oxidizing agent at elevated temperature and caused serious decomposition of PAni. Combined with differential scanning calorimetry (DSC), in-situ X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) analyses, the crosslinking reaction among PAni-EB molecules at about 250 °C was characterized, and the kinetic parameters were calculated by applying different heating rates in the DSC measurement.     

Photopolymerization of enzymatically synthesized methacrylated poly(caprolactone) with poly(ethylene glycol) macromonomer

Polycaprolactone (PCL) based α,ω-methacrylated macromonomer (DMPCL) was synthesized via enzymatic ring-opening polymerization (eROP) by using Novozyme 435 as the enzyme immobilized catalyst. DMPCL was further photopolymerized with monofunctional poly(ethylene glycol) methyl ether methacrylate (PEGMA-950) macromonomer and trimethylolpropane triacrylate (TMPTA) as tri-functionalized crosslinking agent in glass vials when CHCl₃ was the solvent and Irgacure 819 was the photoinitiator. Ultraviolet (UV) Light Emitting Diode (LED) bulbs enabled photoinduced reactions at room temperature with low heat generation and high reaction efficiency. The obtained gels were characterized with Fourier Transform Infrared Spectroscopy (FT-IR) and Differential Scanning Calorimetry (DSC). DMPCL participated as an effective crosslinking agent in the photopolymerization of PEGMA-950. Combined usage of DMPCL and PEGMA-950 resulted in significantly more effective polymerization than the separate photopolymerizations of these macromonomers.     

Ion conductive poly(ethylene oxide-dimethyl siloxane) copolymers

A series of poly(ethylene oxide-dimethyl siloxane) copolymers, — [SiMe₂O(CH₂CH₂O)_n]_m — (n = 2, 3, 4, 5, 6.4, 8.7, 13.3), were synthesised by the reaction of polyethylene glycol with dimethyl dimethoxy/diethoxysilane. Corresponding ion-conductive polymers were prepared by complexing these copolymers with salts (sodium tetrafluoroborate or ammonium adipate). The highest conductivity of these systems at room temperature was 3 × 10⁻⁴ S cm⁻¹ and 6 × 10⁻⁵ S cm⁻¹, respectively. The glass transition temperature of these copolymers is reported and is seen to be dependent on the length of the ether units. The effects of siloxane content, salt concentration, and temperature on the conductivity are discussed. © 1996 John Wiley & Sons, Inc.