Synthesis and properties of a bilirubin analog with propionic acid groups replaced by carboxyl

The unnatural bile pigment analog of bilirubin-IXα, 2,3,7,13,17,18-hexamethyl-(10H,21H,23H,24H)-bilin-1,19-dione-8,12-dicarboxylic acid (1), was synthesized as its diethyl ester by coupling 4,4′-dimethyl-3,3′-dicarboethoxydipyrrylmethane-5,5′-dialdehyde with 3,4-dimethylpyrrolin-2-one.     

Photoinduced single- versus double-bond torsion in donor-acceptor-substituted trans-stilbenes

The electronic absorption and fluorescence spectra, quantum yields for fluorescence (Phi(f)) and trans --> cis photoisomerization (Phi(tc)), and fluorescence lifetimes of trans-4-(N-arylamino)-4'-cyanostilbenes (2H, 2Me, 2OM, 2CN, and 2Xy with aryl = phenyl, 4-methylphenyl, 4-methoxyphenyl, 4-cyanophenyl, and 2,5-dimethylphenyl, respectively), trans-4-(N-methyl-N-phenylamino)-4'-cyanostilbene (2MP), trans-4-(N,N-diphenylamino)-4'-cyanostilbene (2PP), trans-4-(N-methyl-N-phenylamino)-4'-nitrostilbene (3MP), and three ring-bridged analogues 2OMB, 2MPB, and 3MPB are reported. Whereas fluorescence and torsion of the central double bond account for the excited decay of the majority of these donor-acceptor substituted stilbenes in both nonpolar and polar solvents (i.e., Phi(f) + 2Phi(tc) approximately 1), exceptions are observed for 2OM, 3MP, and 3MPB in solvents more polar than THF and for 2Me and 2MP in acetonitrile as a result of the formation of a weakly fluorescent and isomerization-free twisted intramolecular charge transfer (TICT) state (i.e., Phi(f) + 2Phi(tc) < 1). The TICT state for 2OM, 2Me, and 2MP results from the torsion of the stilbenyl-anilino C-N single bond, but the torsion of the styryl-anilino C-C bond is more likely to be responsible for the TICT state formation of 3MP and 3MPB. In conjunction with the behavior of aminostilbenes 1, a guideline based on the values of Phi(f) and Phi(tc) for judging the importance of a TICT state for trans-stilbenes is provided. Accordingly, the TICT state formation is unimportant for the excited decay of trans-4-(N,N-dimethylamino)-4'-cyanostilbene (DCS). In contrast, our results support the previously proposed TICT state for trans-4-(N,N-dimethylamino)-4'-nitrostilbene (DNS).     

Complexation of diphenyl(phenylacetenyl)phosphine to rhodium(III) tetraphenyl porphyrins: synthesis and structural,spectroscopic, and thermodynamic studies

The coordination of diphenyl(phenylacetenyl)phosphine (DPAP, 1) to (X)Rh(III)TPP (X = I (2) or Me (3); TPP = tetraphenyl porphyrin) was studied in solution and in the solid state. The iodide is readily displaced by the phosphine, leading to the bis-phosphine complex [(DPAP)(2)Rh(TPP)](I) (4). The methylide on rhodium in 3 is not displaced, leading selectively to the mono-phosphine complex (DPAP)(Me)Rh(TPP) (5). The first and second association constants, as determined by isothermal titration calorimetry and UV-vis titrations, are in the range 10(4)-10(7) M(-1) (in CH(2)Cl(2)). Using LDI-TOF mass spectrometry, the mono-phosphine complexes can be detected but not the bis-phosphine complexes. The electronic spectrum of 4 is similar to those previously reported with other tertiary phosphine ligands, whereas (DPAP)(I)Rh(TPP) (6) displays a low energy B-band absorption and a high energy Q-band absorption. In contrast to earlier reports, displacement of the methylide on rhodium in 5 could not be observed at any concentration, and the electronic spectra of 4 and 5 are almost identical. Isothermal titration calorimetry experiments showed that all binding events are exothermic, and all are enthalpy driven. The largest values of DeltaG degrees are found for 6. The thermodynamic and UV-vis data reveal that the methylide and the phosphine ligand have an almost identical electronic trans-influence on the sixth ligand.     

Coordination and oxidative addition at a low-coordinate rhodium(I) beta-diiminate centre

The reaction of 14e [L(Me)Rh(coe)] (1; L(Me)[double bond]ArNC(Me)CHC(Me)NAr, Ar[double bond]2,6-Me(2)C(6)H(3); coe[double bond]cis-cyclooctene) with phenyl halides and thiophenes was studied to assess the competition between sigma coordination, arene pi coordination and oxidative addition of a C-X bond. Whereas oxidative addition of the C-Cl and C-Br bonds of chlorobenzene and bromobenzene to L(Me)Rh results in the dinuclear species [[L(Me)Rh(Ph)(micro-X)](2)] (X=Cl, Br), fluorobenzene yields the dinuclear inverse sandwich complex [[L(Me)Rh](2)(anti-micro-eta(4):eta(4)-PhF)]. Thiophene undergoes oxidative addition of the C-S bond to give a dinuclear product. The reaction of 1 with dibenzo[b,d]thiophene (dbt) in the ratio 1:2 resulted in the formation of the sigma complex [L(Me)Rh(eta(1)-(S)-dbt)(2)], which in solution dissociates into free dbt and a mixture of the mononuclear complex [L(Me)Rh(eta(4)-(1,2,3,4)-dbt)] and the dinuclear complex [[L(Me)Rh](2)(micro-eta(4)-(1,2,3,4):eta(4)-(6,7,8,9)-dbt)]. The latter could be obtained selectively by the 2:1 reaction of 1 and dbt. Reaction of 1 with diethyl sulfide produces [L(Me)Rh(Et(2)S)(2)], which in the presence of hydrogen loses a diethyl sulfide ligand to give [L(Me)Rh(Et(2)S)(H(2))] and catalyses the hydrogenation of cyclooctene.     

The effects of light lanthanoid elements (La, Ce, Nd) on (Ar)CF-Ln coordination and C-F activation in N,N-dialkyl-N'-2,3,5,6-tetrafluorophenylethane-1,2-diaminate complexes

A new class of homoleptic organoamido rare earth complexes [Ln(L(Me) or L(Et))(3)] (Ln = La, Ce, Nd; L(Me/Et) = p-HC(6)F(4)N(CH(2))(2)NMe(2)/Et(2)) exhibiting (Ar)CF-Ln interactions has been isolated from redox-transmetallation/protolysis (RTP) reactions between the free metals, Hg(C(6)F(5))(2) and L(Me/Et)H in tetrahydrofuran, together with low yields of [Ln(L(Me))(2)F](3) (Ln = La, Ce) or [Nd(L(Et))(2)F](2) species, resulting from C-F activation reactions. The structures of the homoleptic complexes have eight-coordinate Ln metals with two tridentate (N,N',F) amide ligands including (Ar)CF-Ln bonds and either a bidentate (N,F) ligand (Ln = La, Ce, Nd; L(Et)) or a bidentate (N,N') ligand (Ln = Nd; L(Me)), in an unusual case of linkage variation. All (Ar)CF-Ln bond lengths are shorter than or similar to the corresponding Ln-NMe(2)/Et(2) bond lengths. In [Ln(L(Me))(2)F](3) (Ln = La, Ce) complexes, there is a six-membered ring framework with alternating F and Ln atoms and the metal atoms are eight-coordinate with two tridentate (N,N',F) L(Me) ligands, whilst [Nd(L(Et))(2)F](2) is a fluoride-bridged dimer.     

Wavelength-dependent electron and energy transfer pathways in a side-to-face ruthenium porphyrin/perylene bisimide assembly

A new side-to-face supramolecular array of chromophores, where a pyridyl-substituted perylene bisimide dye axially binds to two ruthenium porphyrin fragments, has been prepared by self-assembly. The array is formulated as DPyPBI[Ru(TPP)(CO)](2), where DPyPBI = N,N'-di(4-pyridyl)-1,6,7,12-tetra(4-tert-butylphenoxy)perylene-3,4:9,10-tetracarboxylic acid bisimide and TPP = 5,10,15,20-tetraphenylporphyrin. The photophysical behavior of DPyPBI[Ru(TPP)(CO)](2) has been studied by fast (nanoseconds) and ultrafast (femtoseconds) time-resolved techniques. The observed behavior sharply changes with excitation wavelength, depending on whether the DPyPBI or Ru(TPP)(CO) units are excited. After DPyPBI excitation, the strong fluorescence typical of this unit is completely quenched, and time-resolved spectroscopy reveals the occurrence of photoinduced electron transfer from the ruthenium porphyrin to the perylene bisimide dye (tau = 5.6 ps) followed by charge recombination (tau = 270 ps). Upon excitation of the Ru(TPP)(CO) fragments, on the other hand, ultrafast (tau < 1 ps) intersystem crossing is followed by triplet energy transfer from the ruthenium porphyrin to the perylene bisimide dye (tau = 720 ps). The perylene-based triplet state decays to the ground state on a longer time scale (tau = 9.8 micros). The photophysics of this supramolecular array provides remarkable examples of (i) wavelength-dependent behavior (a small change in excitation wavelength causes a sharp switch from electron to energy transfer) and (ii) intramolecular sensitization (the triplet state of the perylene bisimide, inaccessible in the free dye, is efficiently populated in the array).     

Coordination chemistry of a model for the GP cofactor in the Hmd hydrogenase: hydrogen-bonding and hydrogen-transfer catalysis

Cp(*)M(2+) complexes (M = Rh, Ir; Cp(*) = C(5)Me(5)) are described for 6-(carboxymethyl)-4-methyl-2-hydroxypyridine (cmhpH(2)), an analogue of the guanylylpyridone cofactor in the hydrogenase Hmd. Three findings indicate that Cp(*)M(Hcmhp)(+) stabilizes the binding of hydrogen-bond acceptors to the sixth coordination site: (i) water binds in preference to Cl-, (ii) the adduct Cp(*)Rh(cmhp)(2-hydroxypyridine) exhibits a very short intramolecular hydrogen bond (r(o-o) = 2.38 A; (1)H NMR delta(H) 17.2), and (iii) Cp(*)Ir(cmhpH)Cl efficiently catalyzes the dehydrogenation of PhCH(OH)Me to PhC(O)Me.     

A series of dinuclear homo- and heterometallic complexes with two or three bridging sulfido ligands derived from the tungsten tris(sulfido) complex [Et(4)N][(Me(2)Tp)WS(3)] (Me(2)Tp = hydridotris(3,5-dimethylpyrazol-1-yl)borate)

The generation of heterobimetallic complexes with two or three bridging sulfido ligands from mononuclear tris(sulfido) complex of tungsten [Et(4)N][(Me(2)Tp)WS(3)] (1; Me(2)Tp = hydridotris(3,5-dimethylpyrazol-1-yl)borate) and organometallic precursors is reported. Treatment of 1 with stoichiometric amounts of metal complexes such as [M(PPh(3))(4)] (M = Pt, Pd), [(PtMe(3))(4)(micro(3)-I)(4)], [M(cod)(PPh(3))(2)][PF(6)] (M = Ir, Rh; cod = 1,5-cyclooctadiene), [Rh(cod)(dppe)][PF(6)] (dppe = Ph(2)PCH(2)CH(2)PPh(2)), [CpIr(MeCN)(3)][PF(6)](2) (Cp = eta(5)-C(5)Me(5)), [CpRu(MeCN)(3)][PF(6)], and [M(CO)(3)(MeCN)(3)] (M = Mo, W) in MeCN or MeCN-THF at room temperature afforded either the doubly bridged complexes [Et(4)N][(Me(2)Tp)W(=S)(micro-S)(2)M(PPh(3))] (M = Pt (3), Pd (4)), [(Me(2)Tp)W(=S)(micro-S)(2)M(cod)] (M = Ir, Rh (7)), [(Me(2)Tp)W(=S)(micro-S)(2)Rh(dppe)], [(Me(2)Tp)W(=S)(micro-S)(2)RuCp] (10), and [Et(4)N][(Me(2)Tp)W(=S)(micro-S)(2)W(CO)(3)] (12) or the triply bridged complexes including [(Me(2)Tp)W(micro-S)(3)PtMe(3)] (5), [(Me(2)Tp)W(micro-S)(3)IrCp][PF(6)] (9), and [Et(4)N][(Me(2)Tp)W(micro-S)(3)Mo(CO)(3)] (11), depending on the nature of the incorporated metal fragment. The X-ray analyses have been undertaken to clarify the detailed structures of 3-5, 7, and 9-12.     

Cationic Rh complexes with novel spiro tetraarylpentaborate anions prepared from arylboronic acids and aryloxorhodium complexes

Ar-B(OH)2 (1a: Ar = C6H4OMe-4, 1b: Ar = C6H3Me2-2,6) react immediately with Rh(OC6H4Me-4)(PMe3)3 (2) in 5 : 1 molar ratio at room temperature to generate [Rh(PMe3)4]+[B5O6Ar4]- (3a: Ar = C6H4OMe-4, 3b: Ar = C6H3Me2-2,6). p-Cresol (92%/Rh), anisole (80%/Rh) and H2O (364%/Rh) are formed from 1a and 2. The reaction of 1a with 2 for 24 h produces [Rh(PMe3)4]+[B5O6(OH)4]- (4) as a yellow solid. This is attributed to hydrolytic dearylation of once formed 3a because the direct reaction of 3a with excess H2O forms 4. An equimolar reaction of 2 with phenylboroxine (PhBO)3 causes transfer of the 4-methylphenoxo ligand from rhodium to boron to produce [Rh(PMe3)4]+[B3O3Ph3(OC6H4Me-4)]- (5). Arylboronic acids 1a and 1b react with Rh(OC6H4Me-4)(PR3)3 (6: R = Et, 8: R = Ph) and with Rh(OC6H4Me-4)(cod)(PR3) (11: R = iPr, 12: R = Ph) to form [Rh(PR3)4]+[B5O6Ar4]- (7a: R = Et, Ar = C6H4OMe-4, 7b: R = Et, Ar = C6H3Me2-2,6, 9a: R = Ph, Ar = C6H3Me2-2,6) and [Rh(cod)(PR3)(L)]+[B5O6Ar4]- (13b: R = iPr, L = acetone, Ar = C6H3Me2-2,6, 14a: R = Ph, L = PPh3, Ar = C6H4OMe-4, 14b: R = Ph, L = PPh3, Ar = C6H3Me2-2,6), respectively. Hydrolysis of 14a yields [Rh(cod)(PPh3)2]+[B5O6(OH)4]- (15) quantitatively.     

Interactions of Rh(III)-dihydrido-bis(phosphine) complexes with semicarbazones

Interaction of cis,trans,cis-[Rh(H)2(PR3)2(acetone)2]PF6 complexes (R = aryl or R3 = Ph2Me, Ph2Et) under H2 with E-semicarbazones gives the Rh(III)-dihydrido-bis(phosphine)-semicarbazone species cis,trans-[Rh(H)2(PR3)2{R'(R' ')C=N-N(H)CONH2}]PF6, where R' and R' ' are Ph, Et, or Me. The complexes are generally characterized by elemental analysis, 31P{1H} NMR, 1H NMR, and IR spectroscopies, and MS. X-ray analysis of three PPh3 complexes reveals chelation of E-semicarbazones by the imine-N atom and the carbonyl-O atom. In contrast, the corresponding reaction of [Rh(H)2(PPhMe2)2(acetone)2]PF6 with acetophenone semicarbazone gives the ortho-metalated-semicarbazone species cis-[RhH(PPhMe2)2{o-C6H4(Me)C=N-N(H)CONH2}]PF6. The X-ray structure of E-propiophenone semicarbazone is also reported. Rhodium-catalyzed, homogeneous hydrogenation of semicarbazones was not observed even at 40 atm H2.     

Transition metal-catalyzed dissociation of phosphine-gallane adducts: isolation of mechanistic model complexes and heterogeneous catalyst poisoning studies

Attempts to induce the catalytic dehydrocoupling of the phosphine-gallane adduct Cy2PH.GaH3 (Cy=cyclohexyl) (1) by treatment with ca. 5 mol% of either the Rh(I) complex [{Rh(mu-Cl)(1,5-cod)}2] (cod=cyclooctadiene) or the Rh(0) species Rh/Al2O3 and [Oct4N]Cl-stabilized colloidal Rh led to catalytic P-Ga bond cleavage to generate the phosphine, H2, and Ga metal. Interestingly, subsequent treatment of the reaction mixtures with Me2NH.BH3 failed to lead to the formation of [Me2N-BH2]2 via Rh-catalyzed dehydrocoupling, which suggested that catalyst deactivation was taking place. Poisoning studies involving the treatment of the active Rh(0) catalyst with Cy2PH, PMe3, or GaH3.OEt2 showed that deactivation indeed occurred as the dehydrocoupling of Me2NH.BH3 either dramatically decreased in rate or did not take place at all. The X-ray photoelectron spectroscopy analysis of colloidal Rh(0) that had been treated with Cy2PH and PMe3 confirmed the presence of phosphorus on the catalyst surface in each case, consistent with catalyst poisoning via phosphine ligation. A mechanism for the Rh-catalyzed P-Ga bond cleavage reaction of 1 and Me3P.GaH3 (2) is proposed and involves the initial reaction of Ga-H bonds with the Rh colloid surface, which weakens and ultimately breaks the P-Ga bond. The reasonable nature of this mechanism is supported by a model reaction between the zerovalent group 9 complex Co2(CO)8 and 2 which afforded Me3P.Ga[Co(CO)4]3 (3). Consistent with the elongated and thus weakened P-Ga bond in 3, solutions of this species in Et2O subsequently form the known complex [(Me3P)Co(CO)3]2 (4) and Ga metal after 4 h at 25 degrees C.     

Mechanism of the Photodissociation of 4-Diphenyl(trimethylsilyl)methyl-N,N-dimethylaniline

On irradiation in hexane (248- and 308-nm laser light) 4-diphenyl(trimethylsilyl)methyl-N,N-dimethylaniline, 2, undergoes photodissociation of the C-Si bond giving 4-N,N-dimethylamino-triphenylmethyl radical, 3(*) (lambda(max) at 343 and 403 nm), in very high quantum yield (Phi = 0.92). The intervention of the triplet state of 2 (lambda(max) at 515 nm) is clearly demonstrated through quenching experiments with 2,3-dimethylbuta-1,3-diene, styrene, and methyl methacrylate using nanosecond laser flash photolysis (LFP). The formation of 3(*) is further demonstrated using EPR spectroscopy. The detection of the S(1) state of 2 was achieved using 266-nm picosecond LFP, and its lifetime was found to be 1400 ps, in agreement with the fluorescence lifetime (tau(f) = 1500 ps, Phi(f) = 0.085). The S(1) state is converted almost exclusively to the T(1) state (Phi(T) = 0.92). In polar solvents such as MeCN, 2 undergoes (1) photoionization to its radical cation 2(*)(+), and (2) photodissociation of the C-Si bond, giving radical 3(*) as before in hexane. The formation of 2(*)(+) occurs through a two-photon process. Radical cation 2(*)(+) does not fragment further, as would be expected, to 3(*) via a nucleophile(MeCN)-assisted C-Si bond cleavage but regenerates the parent compound 2. Obviously, the bulkiness of the triphenylmethyl group prevents interaction of 2(*)(+) with the solvent (MeCN) and transfer to it of the electrofugal group Me(3)Si(+). The above results of the laser flash photolysis are supported by pulse radiolysis, fluorescence measurements, and product analysis.     

Inverse potassium hydride: a theoretical study

Results of an experimental study on the unusual "inverse" charge state (H(+)Na(-)) in salts where the H(+) ion is sequestered, combined with our earlier theoretical calculations on an unsequestered model compound (Me(3)N-H(+)...Na(-)), prompted us to further investigate such systems. In particular, we examined Et(3)N-H(+)...K(-) because considerations of the proton affinity of the amine and of the metal-hydride bond strength suggested that this ion-pair complex might be more stable to proton abstraction than was Me(3)N-H(+)...Na(-). In the present work, the ground-state potential energy surface of the Et(3)N-H(+)...K(-) ion pair was examined using second-order M?ller-Plesset perturbation theory and 6-311++G basis sets. We found Et(3)N-H(+)...K(-) to be metastable to dissociation with a barrier of 8 kcal mol(-1) (computed at the CCSD(T) level of theory). This barrier indeed is substantially larger than that found earlier for (Me(3)N-H(+)...Na(-)) and suggests that unsequestered inverse-charged H(+)M(-) ion-pair salts may offer a reasonable route to creating high-energy materials if a means for synthesizing them in the laboratory can be designed.     

Primary and secondary phosphine complexes of iron porphyrins and ruthenium phthalocyanine: synthesis, structure, and P-H bond functionalization

Reduction of [Fe(III)(Por)Cl] (Por = porphyrinato dianion) with Na2S2O4 followed by reaction with excess PH2Ph, PH2Ad, or PHPh2 afforded [Fe(II)(F20-TPP)(PH2Ph)2] (1a), [Fe(II)(F20-TPP)(PH2Ad)2] (1b), [Fe(II)(F20-TPP)(PHPh2)2] (2a), and [Fe(II)(2,6-Cl2TPP)(PHPh2)2] (2b). Reaction of [Ru(II)(Pc)(DMSO)2] (Pc = phthalocyaninato dianion) with PH2Ph or PHPh2 gave [Ru(II)(Pc)(PH2Ph)2] (3a) and [Ru(II)(Pc)(PHPh2)2] (4). [Ru(II)(Pc)(PH2Ad)2] (3b) and [Ru(II)(Pc)(PH2Bu(t))2] (3c) were isolated by treating a mixture of [Ru(II)(Pc)(DMSO)2] and O=PCl2Ad or PCl2Bu(t) with LiAlH4. Hydrophosphination of CH2=CHR (R = CO2Et, CN) with [Ru(II)(F20-TPP)(PH2Ph)2] or [Ru(II)(F20-TPP)(PHPh2)2] in the presence of (t)BuOK led to the isolation of [Ru(II)(F20-TPP)(P(CH2CH2R)2Ph)2] (R = CO2Et, 5a; CN, 5b) and [Ru(II)(F20-TPP)(P(CH2CH2R)Ph2)2] (R = CO2Et, 6a; CN, 6b). Similar reaction of 3a with CH2=CHCN or MeI gave [Ru(II)(Pc)(P(CH2CH2CN)2Ph)2] (7) or [Ru(II)(Pc)(PMe2Ph)2] (8). The reactions of 4 with CH2=CHR (R = CO2Et, CN, C(O)Me, P(O)(OEt)2, S(O)2Ph), CH2=C(Me)CO2Me, CH(CO2Me)=CHCO2Me, MeI, BnCl, and RBr (R = (n)Bu, CH2=CHCH2, MeC[triple bond]CCH2, HC[triple bond]CCH2) in the presence of (t)BuOK afforded [Ru(II)(Pc)(P(CH2CH2R)Ph2)2] (R = CO2Et, 9a; CN, 9b; C(O)Me, 9c; P(O)(OEt)2, 9d; S(O)2Ph, 9e), [Ru(II)(Pc)(P(CH2CH(Me)CO2Me)Ph2)2] (9f), [Ru(II)(Pc)(P(CH(CO2Me)CH2CO2Me)Ph2)2] (9g), and [Ru(II)(Pc)(PRPh2)2] (R = Me, 10a; Bu(n), 10b; Bn, 10c; CH2CH=CH2, 10d; CH2C[triple bond]CMe, 10e; CH=C=CH2, 10f). X-ray crystal structure determinations revealed Fe-P distances of 2.2597(9) (1a) and 2.309(2) A (2bx 2 CH2Cl2) and Ru-P distances of 2.3707(13) (3b), 2.373(2) (3c), 2.3478(11) (4), and 2.3754(10) A (5b x 2 CH2Cl2). Both the crystal structures of 3b and 4 feature intermolecular C-H...pi interactions, which link the molecules into 3D and 2D networks, respectively.     

Quenched gas-phase reactions of tetraborane(10), B4H10, with substituted alkynes: new nido-dicarbapentaboranes and arachno-monocarbapentaboranes

New alkyl derivatives of the nido-dicarbapentaborane, 1,2-C(2)B(3)H(7), and arachno-carbapentaborane, 1-CB(4)H(10), have been identified as the main volatile carbaborane products in quenched gas-phase reactions of tetraborane(10), B(4)H(10), with alkyl-substituted ethynes RC[triple bond]CR' (R = Me, Et, (n)Pr or (t)Bu, R' = H; R = Me or Et, R' = Me). The gaseous mixtures were heated at 70 degrees C, and monitored by gas-phase mass spectrometry. Each reaction was quenched when the ethyne was used up. The quenched gas-phase reaction of B(4)H(10) and Me(3)SiC[triple bond]CH gave a single volatile carbaborane product, 1-Me(3)Si-1,2-C(2)B(3)H(6).     

The Reaction Of Metal Trialkyls With Benzo[H]Quinolin-10-ol

IntroductionThechemistryoforganoaluminum,organogalliumandorganoindiumcomplexeshasattractedmuchat'tentionduenotonlytotheirinterestingstructuralandchemicalpropertiesbutalsotheirapplicationinsemiconductormaterialsl-5.InthecourseofourstudiesonexploringvolatileMOCVDprecursorsthathavethepropertiesoflowertoxicityandhigherstability,wehaverecentlyreportedonthesynthesisandcharacterizationofintermolecularadducts'-',novelbondingmodecomplexes",',andthecomplexesinwhichN/Omixed-donorcrownethersasligands'l'…     

Photoinduced intramolecular electron-transfer reactions of reconstituted met- and zinc-myoglobins appending acridine and methylacridinium ion as DNA-binders

Three types of reconstituted met- and zinc-myoglobin (metMb and ZnMb) dyads, ZnMbAc(4)Me+, ZnMbAc(6)Me+, and metMbAc(6) have been prepared by incorporating chemically modified metalloporphyrin cofactor appending an acridine (Ac) or a methylacridinium ion ([AcMe]+) into apo-Mb. In the bimolecular system between ZnMb and [AcMe]+, the photoexcited triplet state of ZnMb, 3(ZnMb)*, was successfully quenched by [AcMe]+ to form the radical pair of ZnMb cation (ZnMb*+) and reduced methylacridine ([AcMe]*), followed by a thermal back ET reaction. The rate constants for the intermolecular quenching ET (kq) and the back ET reaction (kb) at 25 degrees C were successfully obtained as kq = (8.8 +/- 0.4) x 10(7) M(-1) s(-1) and kb = (1.2 +/- 0.1) x 10(8) M(-1) s(-1), respectively. On the other hand, in case of the intramolecular photoinduced ET reactions of ZnMbAc(4)Me+ and ZnMbAc(6)Me+ dyads, the first-order quenching rate constants (kET) of 3(ZnMb)* by [AcMe]+ moiety were determined to be kET = 2.6 x 10(3) and 2.5 x 10(3) s(-1), respectively. When such ET occurs along the alkyl spacer via through-bond mechanism at the surface of Mb, the obtained kET is reasonable to provide decay constant of beta (1.0-1.3 A(-1)). Upon photoirradiation of [AcMe]+ moiety, kinetic studies also presented the intramolecular quenching reactions from the excited singlet state, 1([AcMe]+)*, whose likely process is the photoinduced energy-transfer reaction. For metMbAc(6) dyad, steady-state fluorescence was almost quenched, while the signal around 440 nm gradually appeared in the presence of various concentrations of DNA. Our study implies that synthetic manipulation at the Mb surface, by using an artificial DNA-binder coupled with photoinduced reaction, may provide valuable information to construct new Mb-DNA complex and sensitive fluorescent for DNA.     

Pyridylpyrrolides as alternatives to cyclometalated phenylpyridine ligands: synthesis and characterization of luminescent zinc and boron pyridylpyrrolide complexes

The synthesis, structure, and properties of six luminescent pyridylpyrrolide complexes and the first structural characterization of pyridylpyrrolide metal complexes are reported. A series of new zinc complexes, bis(pyridylpyrrolyl)zinc, (R2PyrPy)2Zn (R = Me, Et, iPr, tBu, and Ph), that vary in their substituents on the pyrrole ring (Me, Et, iPr, tBu, and Ph), were prepared. Pyrrole substitution produced small structural changes in the complexes and affected the fluorescence properties very little. The zinc complexes were found to be luminescent, emitting at 495 nm (Phi = 0.32, 0.32 0.31, 0.19 and 0.57, respectively). A boron analog, (Me2PyrPy)BF2, was prepared and was found to share the luminescent properties with the zinc complexes, emitting at 505 nm (Phi = 0.22), but not their water-sensitivity. A total of four crystal structures are reported, tBu2PyrPyH, (Me2PyrPy)2Zn, (tBu2PyrPy)2Zn, and (Me2PyrPy)BF2. tBu2PyrPyH crystallizes as a doubly hydrogen bonded dimer with non-coplanar pyridine and pyrrole rings. The solid-state structures of (Me2PyrPy)2Zn and (tBu2PyrPy)2Zn revealed that despite the large change in steric bulk, the two compounds have very similar structures. The structure of (Me2PyrPy)BF2 showed changes that are expected with the interaction between a smaller atom (B as compared to Zn). Molecular orbital calculations were performed on Me2PyrPyH, (Me2PyrPy)BF2, and (Me2PyrPy)2Zn using Gaussian 98 methods. It was found that the main transition (HOMO-LUMO) for all three molecules is a pi-->pi* transition and that in the inorganic complexes, the metal atom (zinc or boron) present has very little effect on transition, evidence that the optical properties are largely ligand based and that the B or Zn atom's main effect is lowering of the LUMO relative energy.     

Reactivity of the B-H Bond in tris(pyrazolyl)hydroborato zinc complexes: unexpected example of zinc hydride formation in a protic solvent and its relevance towards hydrogen transfer to NAD(+) mimics by tris(pyrazolyl)hydroborato zinc complexes in alcoholic media

Solutions of the zinc hydroxide complex [Tp(Bu(t),Me)]ZnOH in alcohols (ROH; R = Me, Et, Pr(i)) achieve hydride transfer to the NAD(+) model, 10-methylacridinium perchlorate. Deuterium labeling studies, however, demonstrate that the source of the hydride is not the alcohol but, rather, the B [bond] H group of the [Tp(Bu(t),Me)] ligand. A further example in which a [Tp(Bu(t),Me)] ligand acts as a hydride donor is provided by the reaction of the aqua complex [[Tp(Bu(t),Me)]Zn(OH(2))][HOB(C(6)F(5))(3)] with MeOH to generate the zinc hydride complex [Tp(Bu(t),Me)]ZnH. The present study therefore provides a caveat for the often assumed inertness of the B [bond] H group in tris(pyrazolyl)hydroborato ligands, especially in the presence of reactive cationic species.     

Generation and coupling of [Mn(dmpe)2(C triple bond CR)(C triple bond C)]* radicals producing redox-active C4-bridged rigid-rod complexes

The symmetric d(5) trans-bis-alkynyl complexes [Mn(dmpe)(2)(C triple bond CSiR(3))(2)] (R = Me, 1 a; Et, 1 b; Ph, 1 c) (dmpe = 1,2-bis(dimethylphosphino)ethane) have been prepared by the reaction of [Mn(dmpe)(2)Br(2)] with two equivalents of the corresponding acetylide LiC triple bond CSiR(3). The reactions of species 1 with [Cp(2)Fe][PF(6)] yield the corresponding d(4) complexes [Mn(dmpe)(2)(C triple bond CSiR(3))(2)][PF(6)] (R = Me, 2 a; Et, 2 b; Ph, 2 c). These complexes react with NBu(4)F (TBAF) at -10 degrees C to give the desilylated parent acetylide compound [Mn(dmpe)(2)(C triple bond CH)(2)][PF(6)] (6), which is stable only in solution at below 0 degrees C. The asymmetrically substituted trans-bis-alkynyl complexes [Mn(dmpe)(2)(C triple bond CSiR(3))(C triple bond CH)][PF(6)] (R = Me, 7 a; Et, 7 b) related to 6 have been prepared by the reaction of the vinylidene compounds [Mn(dmpe)(2)(C triple bond CSiR(3))(C=CH(2))] (R = Me, 5 a; Et, 5 b) with two equivalents of [Cp(2)Fe][PF(6)] and one equivalent of quinuclidine. The conversion of [Mn(C(5)H(4)Me)(dmpe)I] with Me(3)SiC triple bond CSnMe(3) and dmpe afforded the trans-iodide-alkynyl d(5) complex [Mn(dmpe)(2)(C triple bond CSiMe(3))I] (9). Complex 9 proved to be unstable with regard to ligand disproportionation reactions and could therefore not be oxidized to a unique Mn(III) product, which prevented its further use in acetylide coupling reactions. Compounds 2 react at room temperature with one equivalent of TBAF to form the mixed-valent species [[Mn(dmpe)(2)(C triple bond CH)](2)(micro-C(4))][PF(6)] (11) by C-C coupling of [Mn(dmpe)(2)(C triple bond CH)(C triple bond C*)] radicals generated by deprotonation of 6. In a similar way, the mixed-valent complex [[Mn(dmpe)(2)(C triple bond CSiMe(3))](2)(micro-C(4))][PF(6)] [12](+) is obtained by the reaction of 7 a with one equivalent of DBU (1,8-diazabicyclo[5.4.0]undec-7-ene). The relatively long-lived radical intermediate [Mn(dmpe)(2)(C triple bond CH)(C triple bond C*)] could be trapped as the Mn(I) complex [Mn(dmpe)(2)(C triple bond CH)(triple bond C-CO(2))] (14) by addition of an excess of TEMPO (2,2,6,6-tetramethyl-1-piperidinyloxy) to the reaction mixtures of species 2 and TBAF. The neutral dinuclear Mn(II)/Mn(II) compounds [[Mn(dmpe)(2)(C triple bond CR(3))](2)(micro-C(4))] (R = H, 11; R = SiMe(3), 12) are produced by the reduction of [11](+) and [12](+), respectively, with [FeCp(C(6)Me(6))]. [11](+) and [12](+) can also be oxidized with [Cp(2)Fe][PF(6)] to produce the dicationic Mn(III)/Mn(III) species [[Mn(dmpe)(2)(C triple bond CR(3))](2)(micro-C(4))][PF(6)](2) (R = H, [11](2+); R = SiMe(3), [12](2+)). Both redox processes are fully reversible. The dinuclear compounds have been characterized by NMR, IR, UV/Vis, and Raman spectroscopies, CV, and magnetic susceptibilities, as well as elemental analyses. X-ray diffraction studies have been performed on complexes 4 b, 7 b, 9, [12](+), [12](2+), and 14.