原位液体室透射电镜观察金纳米棒/石墨烯复合物的形成和运动过程

本文利用原位液体室透射电子显微镜实时观察了液态下金纳米棒/石墨烯复合物的动态自组装行为。结果表明,由于电荷吸引力,金纳米棒倾向于通过尖端接近方式靠近石墨烯的边缘。组装结构形成以后,金纳米棒与石墨烯边缘可以发生相对旋转,其中金纳米棒边缘贴合石墨烯边缘的结构更稳定,并且没有显示金纳米棒与石墨烯边缘之间的相对角度随时间的变化。观察到了自组装结构的漂移运动,与较小尺寸的自组装结构相比,较大尺寸的结构显得更难以通过液体流动推动运动,并且其运动更容易因为来自液体室窗口基底的阻力而慢下来。利用液体室透射电镜进一步观察石墨烯折叠结构,观察结果表明折叠结构可随时间在液体中打开和闭合,导致固定在石墨烯层上的金纳米棒表现出与石墨烯之间的明显相对位置变化。总体上,自组装结构非常稳定,并且在液体中没有表现出任何的分离行为。进一步,将金纳米棒/石墨烯复合物用作催化剂,在4-硝基苯酚催化还原实验中显示出比单纯金纳米棒更好的催化性能。投料质量比为1:5的金纳米棒/石墨烯复合物表现出最佳性能,表观速率常数值为0.5570min~(-1),是单纯金纳米棒的8倍。这一显著改善与优化稳定的金纳米棒/石墨烯复合物结构密切相关。原位液体室透射电镜为分析液体中复杂的自组装行为,及未来的高性能复合催化剂材料的开发,提供了一种强有力的表征方法。     

In situ reversible tuning of chemical interface damping in single gold nanorod-based recyclable platforms through manipulation of supramolecular host–guest interactions

Recently, chemical interface damping (CID) has been proposed as a new plasmon damping pathway based on interfacial hot-electron transfer from metal to adsorbate molecules. It has been considered essential, owing to its potential implications in efficient photochemical processes and sensing experiments. However, thus far, studies focusing on controlling CID in single gold nanoparticles have been very limited, and in situ reversible tuning has remained a considerable challenge. In these scanning electron microscopy-correlated dark-field spectroscopic measurements and density functional theory calculations, cucurbit[7]uril (CB[7])-based host–guest supramolecular interactions were employed to examine and control the CID process using monoamine-functionalized CB[7] (CB[7]-NH₂) attached to single gold nanorods (AuNRs). In situ tuning of CID through the CB[7]–oxaliplatin complexation, which can result in the variation of the chemical nature and electronic properties of adsorbates, was presented. In addition, in situ tuning of CID was demonstrated through the competitive release of the oxaliplatin guest from the oxaliplatin@CB[7] complex, which was then replaced by a competitor guest of spermine in sufficient amounts. Furthermore, nuclear magnetic resonance experiments confirmed that the release of the guest is the consequence of adding salt (NaCl). Thus, in situ reversible tuning of CID in single AuNRs was achieved through successive steps of encapsulation and release of the guest on the same AuNR in a flow cell. Finally, single CB[7]-NH₂@AuNRs were presented as a recyclable platform for CID investigations after the complete release of guest molecules from their host–guest inclusion complexes. Therefore, this study has paved a new route to achieve in situ reversible tuning of CID in the same AuNR and to investigate the CID process using CB-based host–guest chemistry with various guest molecules in single AuNRs for efficient hot-electron photochemistry and biosensing applications.

This study has paved a new route to achieve in situ reversible tuning of chemical interface damping (CID) in the same gold nanorod (AuNR) and to investigate the CID process using cucurbituril (CB)-based host–guest chemistry with various guest molecules in single AuNRs.     

In situ assembly, regeneration and plasmonic immunosensing of a Au nanorod monolayer in a closed-surface flow channel

Herein, a simple and effective approach is reported for the in situ generation and regeneration of a Au nanorod (AuNR) monolayer inside a glass/silica-based, closed-surface flow channel. The density of the AuNR monolayer in the flow channel can be easily modified by varying the concentration of the AuNR and the cetyltrimethylammonium bromide as well as the incubation time. The fabricated AuNR monolayer in the flow channels was stable under harsh conditions, such as in extreme pH, organic solvents and at a fast flow rate. In addition, the flow channel could be reused by removing the immobilized AuNRs via the injection of diluted aqua regia or potassium iodide; the AuNR monolayer can subsequently be regenerated. The AuNRs in the closed flow channel were further exploited as a label-free detection method for a clinical biomarker, neutrophil gelatinase-associated lipocalin (NGAL), based on single-nanoparticle plasmonic assay. The corresponding limit of detection for NGAL was measured to be 8.5 ng mL(-1) (~340 pM) based on a signal-to-noise ratio of 3. The estimated recovery of NGAL in human serum and urine was higher than 80%, which indicates that this technique could potentially be used for the diagnosis of acute kidney injury.     

腰接型侧链液晶弹性体研究进展

液晶弹性体是交联型液晶大分子,兼具液晶取向有序性和交联聚合物熵弹性等特性,在传感器、触发器、微流体装置和仿生器件等方面具有很好的应用前景.制备液晶弹性体的微结构,探索其独特的刺激响应性,是目前液晶弹性体研究的重要方向.侧链液晶弹性体的液晶相态类型取决于其液晶基元和主链的连接方式.腰接型侧链液晶弹性体倾向于形成向列型液晶相,具有较快的响应速度和形变程度,是一类独特的液晶弹性体.本文重点介绍腰接型液晶弹性体微结构(如微米柱、微米线等)的制备;利用金纳米粒子的光热转换效应,实现液晶弹性体光响应性的新途径;以及腰接型侧链液晶弹性体仿生微结构的功能性等.同时还对该领域的发展前景进行了展望.     

New aspects of gold nanorod formation via seed-mediated method

Gold nanorods (AuNRs) were obtained via a wet chemistry technique, in aqueous medium, employing crystallisation seeds. The kinetics of formation, the aspect ratio, and the selectivity of the particles were evaluated according to the parameters of synthesis: the growth-driving agent, seed, and gold precursor concentrations. In 2–4 h, the rod particles attained the expected size and shape under kinetic control, and were stable for at least 2 days. In order to obtain good quality AuNRs in good yields, without enrichment, we suggest keeping the growth-driving agent/gold molar ratio, the Au^I/seed ratio, and the concentration of the reagents in the final solution within specific ranges. For example, even if good molar ratios between the reagents are maintained, relatively highly concentrated reaction solutions lead to AuNRs with lower aspect ratios. The main properties of the prepared colloidal systems and the nanoparticles were evaluated by UV–vis spectroscopy and transmission electron microscopy, respectively.     

Gelatin-coated gold nanoparticles as an effective pH-sensitive methotrexate drug delivery system for breast cancer treatment

The present study investigates the synthesis and effectiveness of gold/gelatin nanoparticles (NPs) biopolymer as a carrier for methotrexate (MTX) drug. Two different shapes of gold particles, including spherical AuNPs (50 & 100 nm) and gold nanorods (AuNRs) with three different sizes (20, 50 and 100 nm length) were synthesized using the chemical reduction method. The effect of AuNPs size and shape on the entrapment efficiency (E.E), the release rate of the drug, and cellular uptake were investigated. The surfaces of both AuNPs and AuNRs were coated with a gelatin biopolymer, and the stability and property of the generated compounds were studied. Moreover, MTX as a chemotherapeutic agent was loaded on the gelatin-coated AuNPs/AuNRs complexes. The physicochemical properties of the gelatin-coated AuNPs/AuNRs complexes were studied using ultraviolet-visible (UV–Vis) spectroscopy, dynamic light scattering (DLS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Fourier transform infrared (FT-IR) spectroscopy. The E.E and MTX release behavior from the complexes at pH values of 7.4 and 5.4 and temperatures of 37 and 40 °C were investigated in vitro. The cytotoxic effects of AuNPs, AuNPs-Gelatin, AuNPs-Gelatin-MTX, AuNRs, AuNRs-Gelatin, AuNRs-Gelatin-MTX and free MTX were studied. The results indicated that the E.E of AuNPs was higher than that of AuNRs. The highest release rate of the drug was related to the AuNR1-gelatin complex (pH 5.4 and temperature of 40 °C). In addition, MTX loaded AuNR2-gelatin showed the highest cytotoxic effect on the MCF-7 breast cancer cell line so that even its cell cytotoxicity was more than that of the free drug.     

Platelet‐Facilitated Photothermal Therapy of Head and Neck Squamous Cell Carcinoma

Here, we present a platelet‐facilitated photothermal tumor therapy (PLT‐PTT) strategy, in which PLTs act as carriers for targeted delivery of photothermal agents to tumor tissues and enhance the PTT effect. Gold nanorods (AuNRs) were first loaded into PLTs by electroporation and the resulting AuNR‐loaded PLTs (PLT‐AuNRs) inherited long blood circulation and cancer targeting characteristics from PLTs and good photothermal property from AuNRs. Using a gene‐knockout mouse model, we demonstrate that the administration of PLT‐AuNRs and localizing laser irradiation could effectively inhibit the growth of head and neck squamous cell carcinoma (HNSCC). In addition, we found that the PTT treatment augmented PLT‐AuNRs targeting to the tumor sites and in turn, improved the PTT effects in a feedback manner, demonstrating the unique self‐reinforcing characteristic of PLT‐PTT in cancer therapy.     

DNA directed self-assembly of anisotropic plasmonic nanostructures

Programmable positioning of one-dimensional (1D) gold nanorods (AuNRs) was achieved by DNA directed self-assembly. AuNR dimer structures with various predetermined inter-rod angles and relative distances were constructed with high efficiency. These discrete anisotropic metallic nanostructures exhibit unique plasmonic properties, as measured experimentally and simulated by the discrete dipole approximation method.     

Real-time observation of dynamic heterogeneity of gold nanorods on plasma membrane with darkfield microscopy

The plasma membrane possesses a complicated structure, on which the protein clusters are randomly but orderly distributed to maintain the regular morphology and function of cells. Investigating the detailed dynamic behaviors of nanoparticles(NPs) on cytomembrane is of great importance to understand cellular mechanisms and advance the bio-nano technologies for drug delivery, photothermal therapy, immunotherapy, etc. In this work, to study the dynamic heterogeneous interactions between NPs and cell membrane with high resolution, we established a simple method to efficiently track the translational and rotational diffusion of individual gold nanorods(AuNRs) on cell membranes. This method is based on that an anisotropic AuNR appears as a colored spot under a darkfield microscope(DFM) equipped with a color camera. While obtaining its lateral position, the polar angle of the AuNR can be calculated simultaneously from intensity difference between the R and G channels. Careful analysis shows that the lateral motion of single AuNRs do not follow normal Brownian diffusion, which could be attributed to their hop diffusion in the dynamically varying picket-fence structure of the live cell membrane. Furthermore, 4 different rotationtranslation patterns of the AuNR are observed due to spatiotemporal heterogeneity of the cytomembrane. This simple but robust method for simultaneously obtaining the location and orientation of anisotropic plasmonic nanoparticles could be further applied to the analysis of complicated biological and biomedical processes.     

金纳米棒——从可控制备与修饰到纳米生物学与生物医学应用

金纳米棒因其独特的光学活性(纵向和横向两个等离子体共振吸收峰,可调范围从可见光区到近红外区)、长径比可调,表面易于修饰,生物相容性良好而使得其在纳米生物学和生物医学等领域具有广泛的应用前景。金纳米棒的合成及表面修饰直接决定着其物理化学性质,进而影响其生物相容性及其在生物医学中的应用。本文综述了金纳米棒的可控制备方法(包括模板法、电化学法、光化学法和晶种法)、表面可控修饰方法及其在纳米生物学和生物医学中的应用新进展,重点总结了金纳米棒的表面可控修饰及其在分子探针、生物传感、生物成像、药物载体、基因载体和光热疗法的最新研究进展。最后针对金纳米棒在生物应用过程中的一些瓶颈问题(如:特异性识别能力需要增强和荧光量子产率尚待提高等)提出了将手性分子或智能聚合物引入到金纳米棒表面进行可控修饰,以期增强其特异性识别能力并提高荧光量子产率,为金纳米棒的发展提供了新的思路。     

Investigation of the direct electrochemistry and electrocatalysis of myoglobin on gold nanorods modified electrode

Direct electrochemistry and electrocatalysis of myoglobin (Mb) on a gold nanorod (AuNR)‐decorated carbon ionic liquid electrode (CILE) were studied in this article. The fabricated Nafion/Mb/AuNRs/CILE was used as an electrochemical biosensor for determining trichloroacetic acid (TCA) and sodium nitrite (NaNO₂). AuNRs exhibited high metal conductivity, and acted as the bridge between electrochemical active centers of Mb and the substrate electrode with the electron transfer rate accelerated. Electrochemical performances of Nafion/Mb/AuNRs/CILE were checked in pH 3.0 phosphate buffer solution with the electrochemical parameters calculated. Low detection limits and wide linear ranges were obtained in electrocatalytic investigations of different catalytic substrates including TCA and NaNO₂, which exhibited potential applications in actual sample detection.     

Monitoring human telomere DNA hybridization and G-quadruplex formation using gold nanorods

A facile and multi-response strategy for studying the transformations of human telomere DNA from single strand (ss) to double strand (ds) and G-quadruplex has been established by using positively charged gold nanorod (AuNR) as an optical label. The conformation change information of the telomere DNA was transferred into multiple optical signals, including changes in fluorescence emission, near infrared (NIR) absorption, plasma resonance light scattering (PRLS) and dynamic light scattering (DLS) response. The formations of dsDNA and G-quadruplex DNA induced fluorescence quenching of dye on DNA, and were accompanied by the intensity decrease and blue shift of the longitudinal absorption peak of AuNRs. Meanwhile, PRLS and DLS results revealed slightly increased AuNR aggregation due to increased charge density of dsDNA and G-quadruplex DNA as compared to ssDNA. Control experiment suggests that the AuNR-based assay is highly sequence specific; and the high sensitivity allows the study of human telomere DNA at a concentration as low as 58 nM.     

Direct Observation of the Orientation Dynamics of Single Protein‐Coated Nanoparticles at Liquid/Solid Interfaces

We have observed the rotational dynamics of single protein‐coated gold nanorods (AuNRs) on C₁₈‐modified silica surfaces in real time by dual‐channel polarization dark‐field microscopy. Four different rotational states were identified, depending on the apparent strength of interactions between the AuNRs and the surface. The distributions of the states could be regulated by adjusting the salt concentration, and the state transitions were verified by monitoring the entire desorption process of a single AuNR. Our study provides insight into the interfacial orientation and dynamics of nanoparticles and could be useful for in vitro biophysics and the separation of proteins.     

DNA‐Encoded Tuning of Geometric and Plasmonic Properties of Nanoparticles Growing from Gold Nanorod Seeds

Systematically controlling the morphology of nanoparticles, especially those growing from gold nanorod (AuNR) seeds, are underexplored; however, the AuNR and its related morphologies have shown promises in many applications. Herein we report the use of programmable DNA sequences to control AuNR overgrowth, resulting in gold nanoparticles varying from nanodumbbell to nanooctahedron, as well as shapes in between, with high yield and reproducibility. Kinetic studies revealed two representative pathways for the shape control evolving into distinct nanostructures. Furthermore, the geometric and plasmonic properties of the gold nanoparticles could be precisely controlled by adjusting the base compositions of DNA sequences or by introducing phosphorothioate modifications in the DNA. As a result, the surface plasmon resonance (SPR) peaks of the nanoparticles can be fine‐tuned in a wide range, from visible to second near‐infrared (NIR‐II) region beyond 1000 nm.     

Getting rid of NaBH4: Gold seeds reduced by air-stable agents for synthesizing quasi one-dimensional gold nanoparticles

Herein, we have presented a novel and easy to operate seed-mediated system for fabricating gold bipyramids (AuBPs) with 85% yields without any separation/purification processes. The used gold seeds are reduced by tannin and citrate, two kinds of air stable ligands, and conventionally employed unstable NaBH₄ are thoroughly cast off. In addition, the as-proposed gold seeds can also be employed for AuNRs fabrication with rather larger diameters (22.2–60.3 nm), which is difficult to be achieved by conventional seed mediated fabrication system.     

Equilibrium encapsulation of polystyrene latex particles

We have performed a series of seeded styrene emulsion polymerizations in which the second stage of growth was initiated only after the second-stage monomer charge had achieved equilibrium saturation with the seed particles. The final particles were observed in the electron microscope by using two means of distinguishing between the first- and second-generation polymer: (a) butadiene tagging and osmium tetroxide staining coupled with ultramicrotomy and (b) tritiated-styrene tagging coupled with autoradiographic detection. We find that the first- and second-generation polymer chains are not uniformly mixed throughout the final latex product; rather, the second-generation polymer overcoats the seed polymer in a core–shell fashion. In order to explain these results, we present the viewpoint that monomer actually concentrates at the periphery of the swollen particle to form a monomer-encapsulated structure, rather than swelling the particle uniformly as has always been envisioned. We believe the encapsulation phenomena to be governed by the microscopic thermodynamic environment of the latex particles which has, in turn, a profound effect upon the conformational behavior of the long-chain polymer molecules as they interact with the particle–water interface.     

Facile fabrication of snowman-like Janus particles with asymmetric fluorescent properties via seeded emulsion polymerization

This paper presents a facile method for the preparation of snowman-like Janus particles (SJP) with asymmetric fluorescent property via seeded emulsion polymerization, in which in situ formed raspberry-like cadmium sulfide/poly(styrene–divinylbenzene–acrylic acid) nanocomposite particles (RNP) were used as the seeds. The as-prepared RNP and SJP have been thoroughly characterized by transmission electron microscopy, field-emission scanning electron microscopy, thermogravimetric analysis, X-ray powder diffraction, Fourier transform infrared, ultraviolet visible, and photoluminescent spectrometry. It is found that the size ratio of the polymer bulge/inorganic seed part could be continuously tuned as well as the composition of polymer bulges by changing the composition of monomer mixtures and monomer/seed weight ratio. The obtained Janus particles possess amphiphilic properties which can be further used as solid surfactants to stabilize W/O emulsions and successively to construct hierarchical structured materials. Meanwhile, their asymmetric fluorescent properties may be exploited to detect their assembled situation and orientation at the oil–water interface of emulsions as well as at the surface of hierarchical structured materials.

Synthesis of monoclinic celsian from seeded alkoxide gels

Celsian gels seeded with fine monoclinic celsian seeds were prepared by an all-alkoxide gel route and the effect of seeding on crystallization of the gel-derived glass examined. Gels seeded with 10 wt.% of fine crystals sintered to greater than 93% and 95% density in the form of cold pressed gel powder pellets and as bulk gel respectively, when sintered at temperatures below 1050°C. XRD analysis indicated that seed facilitated the formation of monoclinic celsian in the densified celsian glass, and the amount of monoclinic celsian formed increased with increasing seed content. 92% of the glass crystallized into monoclinic celsian when 10% of 3.2 m seeds were introduced. Transmission Electron Microscopy revealed epitaxial growth of monoclinic celsian from the crystal seeds but homogeneous nucleation and growth of hexacelsian.     

Synthesis of polymeric particles by seeded growth technique for the applications of particle self-assembly

In this study, shape-anisotropic polymeric particles were synthesized by seeded growth technique for the applications of particle self-assembly. First, cross-linked seed particle dispersion was prepared by emulsifier-free emulsion polymerization with divinylbenzene as cross-linker. Then, seeded growth scheme was applied to the seeds by swelling the particles with monomer and subsequent polymerization. The morphologies of the nonspherical particles could be controlled by adjusting the size and the amount of monomer during the swelling step or the cross-linking density of the seed particles, enabling the synthesis of prolate ellipsoids, lobed spheres with triangular shape, snowman-shaped particles, and dumbbell particles. As a demonstrative application, the cross-linked particles could be used as templates for the synthesis of porous materials, whereas dumbbell-shaped particles could be self-organized into colloidal clusters using toluene emulsions as confining geometries. Collectively, shape-anisotropic particles were found to be efficient building blocks to prepare the unique packing structures other than simple spherical colloids.     

Controlling the Structure and Length of Self‐Synthesizing Supramolecular Polymers through Nucleated Growth and Disassembly

Directing self‐assembly processes out‐of‐equilibrium to yield kinetically trapped materials with well‐defined dimensions remains a considerable challenge. Kinetically controlled assembly of self‐synthesizing peptide‐functionalized macrocycles through a nucleation–growth mechanism is reported. Spontaneous fiber formation in this system is effectively shut down as most of the material is diverted into metastable non‐assembling trimeric and tetrameric macrocycles. However, upon adding seeds to this mixture, well‐defined fibers with controllable lengths and narrow polydispersities are obtained. This seeded growth strategy also allows access to supramolecular triblock copolymers. The resulting noncovalent assemblies can be further stabilized through covalent capture. Taken together, these results show that self‐synthesizing materials, through their interplay between dynamic covalent bonds and noncovalent interactions, are uniquely suited for out‐of‐equilibrium self‐assembly.