A study of complexation thermodynamic of humic acid with cadmium (II) and zinc (II) by Schubert's ion-exchange method

The complexation of humic acid from Azraq Oasis with two heavy metal ions Cd(II) and Zn(II) was investigated at pH 4 and 5 under constant ionic strength of 0.1 and at different temperatures (25, 35, 45, 55 and 65 °C). This investigation was done by using Schubert's ion-exchange equilibrium method, and its modified version.The derived conditional stability constants (log β_n) for these two metal-humate complexes were determined; they formed 1:1 and 1:2 complexes. It was found that the conditional stability constants (log β_n) increased by increasing pH and temperatures for all metal-humate complexes. It was found that the conditional stability constant log β₁ for Cd-humate is bigger than Zn-humate at all the desired temperatures and at pH 4 and 5.The derived constants and their temperature dependences have been used to calculate the corresponding thermodynamic parameters ΔG, ΔH, and ΔS, the results indicate that the stability of these complexes derives from very favorable entropy.     

Quantitative parameters for the sequestering capacity of polyacrylates towards alkaline earth metal ions

The complex formation constants of polyacrylic (PAA) ligands (1.4≤log N≤2.4, N=number of monomer units) with calcium and magnesium ions were determined in different ionic media at different ionic strengths, 0≤I≤1 mol l⁻¹, at t=25 °C. Experimental pH-metric data in the presence of Ca²⁺ or Mg²⁺ were firstly analysed in terms of apparent protonation constants, log K^H*, using the “three parameter model” proposed by Högfeldt; differences in log K^H*, determined in different ionic media, were interpreted in terms of complex species formation. The only species present in the system M-PAA (M=Ca²⁺ or Mg²⁺) is ML₂: attempts to find species of different stoichiometry were unsuccessful. The stability dependence of this species on ionic strength, on the degree of neutralisation (α) and on PAA molecular weight is discussed using empirical equations. The formation constant, log β₂, is significantly higher for Ca²⁺ than for Mg²⁺: at I=0.1 mol l⁻¹ (NaCl), log N=1.8 and α=0.5, log β₂^Ca=4.43 and log β₂^Mg=4.24. The formation of polyacrylate-alkaline earth metal complexes is discussed in the light of sequestering effects in natural waters.     

Lipophilicity data for some preservatives estimated by reversed-phase liquid chromatography and different computation methods

The chromatographic behavior of some preservatives was performed by reversed-phase high-performance liquid chromatography on C18 (LiChroCART, Purosphere RP-18e), C8 (Zorbax, Eclipse XDB-C8), CN100 (Säulentechnik, Lichrosphere) and NH₂ (Supelcosil LC-NH₂) columns. The lipophilicity estimated for the first time on the first three columns are comparable and very well correlated. The mobile phase was a mixture of methanol–water (0.1% formic acid) in different volume proportions from 40% to 60% (v/v) for RP-C18, RP-C8 and RP-CN100 column (exception for parabens on RP-C8 column—the methanol concentrations being from 55% to 65%) and from 30% to 50% (v/v) for RP-NH₂. Highly significant correlations were obtained between different experimental indices of lipophilicity (log k_w, S, φ₀, mean of k and log k, and scores of k and log k corresponding to the first principal component) and computed log P values, and C8 column seems to be more suited for estimating the lipophilicity of the investigated compounds. These direct correlations offer a very good opportunity to derive powerful predictive models via Collander-type equations. The reliability of scores values as lipophilic indices is shown by their high correlation with the log K_ow obtained using classical “shake-flask” technique, log k_w and also some of the computed log P values. In addition, the results obtained applying PCA to the retention data may be used in interpreting the molecular mechanism of interactions between eluents and stationary phases with different polarity and to explain the chromatographic behavior of compounds. Finally, the “congeneric lipophilicity chart” described by the scores corresponding to the first principal component has the effect of separating compounds from each other more effectively from congeneric ((dis)similarity) point of view. The parabens and tert-butylhydroquinone appeared to be the most lipophilic preservatives.     

Versatility of an intramolecularly hydrogen-bonded 4-(N,N-dimethylamino)benzoate group as a signaling subunit for anion recognition

The versatility of the 4-(N,N-dimethylamino)benzoate (DMAB) group embedded in host 1 as a signaling subunit for anion recognition was elucidated in terms of ¹H NMR, CD, and fluorescence studies. Host 1 showed 1:1 complexation with monovalent anions and stepwise 1:1 and 2:1 (host 1: anion) complexation with divalent phosphate anions. The binding constants between host 1 and anions were determined by means of ¹H NMR titrations in CD₃CN (HPO₄²⁻: log K_1:1=6.2, log K_2:1=4.9; H₂P₂O₇²⁻: log K_1:1=4.4, log K_2:1=1.8; AMP²⁻: log K_1:1>7, log K_2:1>5) and the affinity of host 1 toward divalent anions, HPO₄²⁻, H₂P₂O₇²⁻, and AMP²⁻, is stronger than that toward monovalent anions, NO₃⁻, BF₄⁻, ClO₄⁻, HSO₄⁻, and PF₆⁻. The CD exciton chirality studies of host 1 with divalent anions, HPO₄²⁻ and AMP²⁻, revealed that the two DMAB groups in the 2:1 complexes were arranged with negative chirality (counterclockwise). The dual fluorescence behavior of the DMAB group demonstrated not only the complexation stoichiometry but also the role(s) of the lipophilic countercation such as tetrabutylammonium and/or the hydrophilic residue in AMP during anion recognition.     

Halogenation of ketones with N-halosuccinimides under solvent-free reaction conditions

Several aryl substituted ketones, cyclic ketones, 1,3-diketones and a β-ketoamide were halogenated with N-halosuccinimides under solvent-free reaction conditions (SFRC) at various temperatures (20-80 °C), whereas less enolized ketones required the presence of an acid catalyst (p-toluenesulfonic acid, PTSA). Bromination of substituted acetophenones obeys first order kinetics v=k_Br[ketone] and the following correlation with the keto-enol equilibrium constant: log k_Br=0.3pK_E+C₁, less enolized substrates being more reactive; the moderate positive charge developed in the rate determining step was confirmed by the Hammett correlation (ρ=−0.5). On the other hand, in cyclic ketones an opposite relation was observed: log k_Br=−0.6pK_E+C₂, indicating higher reactivity of substrates with higher enolization constant (K_E). The important role of the nature of the solvent (MeCN, MeOH) in preorganization of the ketone-NBS-PTSA mixture prior to SFRC bromination was found.     

Solvent extraction and self-assembly of nanosized aggregates of p-tert-butyl thiacalix[4]arenes tetrasubstituted at the lower rim by tertiary amide groups and monocharged metal cations in the organic phase

New p-tert-butyl thiacalix[4]arenes functionalized with morpholide and pyrrolidide groups at the lower rim in cone, partial cone, and 1,3-alternate conformations were synthesized, and their receptor properties for monocharged cations (alkali metal and silver ions) were studied using the picrate extraction method and dynamic light scattering (DLS). To evaluate the ability of the p-tert-butyl thiacalix[4]arene derivatives to recognize metal ions, liquid-liquid extraction of their picrate salts has been carried out in a mutually saturated water-dichloromethane system. The degrees of extraction and the extraction constants for monocharged metal cations (Li⁺, Na⁺, K⁺, Cs⁺) have been determined. The ability of the systems, consisting of host and guest molecules, to self-assembly was proved by DLS using a Zetasizer Nano ZS particle size analyzer. It was shown that all the investigated thiacalix[4]arenes are able to form nanoscale particles with silver cations under the experimental conditions. The pyrrolidide derivative in the cone conformation showed both self-association and aggregation processes with lithium cations. The degree of extraction for all the investigated systems that formed nanoscale aggregates in the organic phase was more than 67% and the extraction constants, log K_ex determined by the picrate extraction method, more than 6.     

Formation and Stability of Binary Complexes of Divalent Ecotoxic Ions (Ni, Cu, Zn, Cd, Pb) with Biodegradable Aminopolycarboxylate Chelants (dl-2-(2-Carboxymethyl)Nitrilotriacetic Acid, GLDA, and 3-Hydroxy-2,2′-Iminodisuccinic Acid, HIDS) in Aqueous Solutions

The protonation and complex formation equilibria of two biodegradable aminopolycarboxylate chelants {dl-2-(2-carboxymethyl)nitrilotriacetic acid (GLDA) and 3-hydroxy-2,2??-iminodisuccinic acid (HIDS)} with Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Pb²⁺ ions were investigated using the potentiometric method at a constant ionic strength of I?=?0.10?mol·dm^?3 (KCl) in aqueous solutions at 25?±?0.1?°C. The stability constants of the proton?Cchelant and metal?Cchelant species for each metal ion were determined, and the concentration distributions of various complex species in solution were evaluated for each ion. The stability constants (log₁₀ K _ML) of the complexes containing Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Pb²⁺ ions followed the identical order of log₁₀ K _CuL?>?log₁₀ K _NiL?>?log₁₀ K _PbL?>?log₁₀ K _ZnL?>?log₁₀ K _CdL for either GLDA (13.03?>?12.74?>?11.60?>?11.52?>?10.31) or HIDS (12.63?>?11.30?>?10.21?>?9.76?>?7.58). In each case, the constants obtained for metal?CGLDA complexes were larger than the corresponding constants for metal?CHIDS complexes. The conditional stability constants (log₁₀ $ K_{\text{ML}}^{'} $ ) of the metal?Cchelant complexes containing GLDA and HIDS were calculated in terms of pH, and compared with the stability constants for EDTA and other biodegradable chelants.     

Amino acid binding in water by a new guanidiniocarbonyl pyrrole dication: the effect of the experimental conditions on complex stability and stoichiometry

The synthesis and binding properties of a new guanidiniocarbonyl pyrrole dication 2 are reported, which efficiently binds alanine carboxylate with log K_ass = 3.9 in buffered water. Due to the increased charge density in this dication, the binding constant is five times larger than for the parent guanidiniocarbonyl pyrrole monocation 1 (log K = 3.2). However, the experimental conditions for determining the binding constant significantly influence both complex stability and stoichiometry. With increasing amount of substrate added during the titration, the overall complex stability decreases due to the increasing ionic strength of the solution. Furthermore, the formation of 1:2 complexes between 2 and 7 becomes increasingly important. Therefore, for the comparison of binding data it has to be assured that exactly the same experimental conditions are used for their determination.     

Investigation of the chromatographic behaviour of some selenium species—Comparison with their octanol-water partitioning

The retention behaviour of selenites (Se(IV)), selenates (Se(VI)), seleno-dl-methionine (Se-Met), selenocystine (Se-Cyst), selenocystamine (Se-CM) and selenourea (Se-U) was investigated using a Discovery end-capped reversed-phase column as stationary phase and different mobile phase conditions. Extrapolated to 100% aqueous mobile phase retention factors (log k_w) of the investigated Se species, determined using different methanol fractions (φ) as organic modifier, were compared with the corresponding actual values. The proper operation of this column even at 100% aqueous phase proved to be valuable for the accurate determination of log k_w values of Se-CM and Se-Cyst, presenting a convex curvature log k = f(φ) at low MeOH fractions, often neglected in the extrapolation procedure. The effect of the presence of n-decylamine as well as saturation of the mobile phase with n-octanol was also studied. For ampholytic Se-Met and Se-Cyst the effect of n-decylamine in retention reflected the predominance of zwitterionic nature in the case of Se-Met in contrary to the non-zwitterionic species found in the case of Se-Cyst, in accordance with our previous findings concerning partitioning experiments in the n-octanol/water system. Finally, an attempt was made to correlate log k_w values with the logarithm of n-octanol/water distribution coefficient, log D, of the investigated Se species and an indicative log D value of Se-U was derived.     

Modelling of Pb-(TAPS)x-(OH)y system and refinement of stability constants in the region of lead hydrolysis and lead hydroxide precipitation

The influence of [(2-hydroxy-1,1-bis(hydroxymethyl)ethyl)amino]-1-propanesulfonic acid (TAPS) on solutions containing lead(II) was studied by direct current polarography (DCP) and glass electrode potentiometry (GEP). The readings were taken at fixed total TAPS to total lead(II) concentration ratios and various pH values, at 25.0 ± 0.1 °C and ionic strength 0.1 M KNO₃.Due to the basic pK_a of the ligand, which occurs in the pH range where large amount of lead polynuclear species are formed, and the occurrence of ligand adsorption, that disabled the use of high concentrations of TAPS on DCP experiments, GEP and DCP experimental conditions were put to the limit in order to provide the correct Pb-TAPS-OH model and reliable stability constants.The proposed final model is: PbL, PbL₂, PbL₂(OH) and PbL₂(OH)₂ with overall stability constants values, as log β, 3.27 ± 0.06, 6.5 ± 0.1, 12.7 ± 0.1 and 17.27 ± 0.06, respectively.A comparative analysis of the strength of complexation of TAPS and a structural related buffer, 2-hydroxy-3-[tris(hydroxymethyl)methylamino]-1-propanesulfonic acid (TAPSO), with lead is also discussed.     

New ICT probes: synthesis and photophysical studies of N-phenylaza-15-crown-5 aryl/heteroaryl oxadiazoles under acidic condition and in the presence of selected metal ions

Molecular probes 6 and 7, incorporating N-phenylaza-15-crown-5 and aryl/heteroaryl oxadiazole have been designed to function as the new intramolecular charge transfer (ICT) probes. Photophysical properties have been studied under acidic condition as well as in the presence of selected metal ions, Ca²⁺, Ba²⁺, Mg²⁺, Na⁺, K⁺, and Li⁺. The changes in the ICT character of the probes, following the addition of trifluoroacetic acid, were interpreted in terms of site and degree of protonations. Based on the cation affinity, the ICT bands in both UV-vis and emission spectra experienced varying degrees of blue shifts due to removal of the aza-crown ether nitrogen from conjugation. The cation-induced spectral shifts and the stability constants revealed binding strength in the order Ca²⁺>Ba²⁺?Li⁺>Na⁺>K⁺>Mg²⁺. Competitive experiments performed in a matrix of ions also indicated superior interaction of 6 and 7 with Ca²⁺. The excited state decay profiles remained largely unperturbed in the presence of metal ions. The studied probes displayed positive solvatochromism and the Stokes shifts and excited state lifetimes increased with increasing solvent polarity. These findings can be rationalized by invoking highly polar nature of the emittive states. The chemoionophores 6 and 7 constitute potentially interesting Ca²⁺ sensitive probes due to their relatively high binding interaction for Ca²⁺ (log K_s=3.55-3.10) vis-a-vis that of biologically interfering Mg²⁺ (log K_s=1.67-1.30).     

Revision of iron(III)–citrate speciation in aqueous solution. Voltammetric and spectrophotometric studies

A detailed study of iron (III)–citrate speciation in aqueous solution (θ = 25 °C, I_c = 0.7 mol L⁻¹) was carried out by voltammetric and UV–vis spectrophotometric measurements and the obtained data were used for reconciled characterization of iron (III)–citrate complexes. Four different redox processes were registered in the voltammograms: at 0.1 V (pH = 5.5) which corresponded to the reduction of iron(III)–monocitrate species (Fe:cit = 1:1), at about −0.1 V (pH = 5.5) that was related to the reduction of FeL₂⁵⁻, FeL₂H⁴⁻ and FeL₂H₂³⁻ complexes, at −0.28 V (pH = 5.5) which corresponded to the reduction of polynuclear iron(III)–citrate complex(es), and at −0.4 V (pH = 7.5) which was probably a consequence of Fe(cit)₂(OH)_x species reduction. Reversible redox process at −0.1 V allowed for the determination of iron(III)–citrate species and their stability constants by analyzing E_p vs. pH and E_p vs. [L⁴⁻] dependence. The UV–vis spectra recorded at varied pH revealed four different spectrally active species: FeLH (log β = 25.69), FeL₂H₂³⁻ (log β = 48.06), FeL₂H⁴⁻ (log β = 44.60), and FeL₂⁵⁻ (log β = 38.85). The stability constants obtained by spectrophotometry were in agreement with those determined electrochemically. The UV–vis spectra recorded at various citrate concentrations (pH = 2.0) supported the results of spectrophotometric–potentiometric titration.     

Challenges in modelling and optimisation of stability constants in the study of Cu-(TAPS)x-(OH)y system by polarography

This work describes the application of polarography, a technique scarcely used for modelling and optimisation of stability constants, in the study of copper complexes with [(2-hydroxy-1,1-bis(hydroxymethyl)ethyl)amino]-1-propanesulfonic acid (TAPS). Direct current polarography (DCP), using low total copper ion and large total ligand to total copper concentration, enabled the full characterization of Cu-(TAPS)_x-(OH)_y system, whose complexation occurs in the pH range of copper hydrolysis and Cu(OH)₂ precipitation. Cu-(TAPS)_x-(OH)_y system was studied by DCP and glass electrode potentiometry (GEP) in aqueous solution at fixed total ligand to total metal concentrations ratios and varied pH values (25.0 °C; I = 0.1 M, KNO₃). The predicted model, as well as the overall stability constants values, are (as log β): CuL⁺ = 4.2, CuL₂ = 7.8, CuL₂(OH)⁻ = 13.9 and CuL₂(OH)₂²⁻ = 18.94. GEP only allowed confirming the stability constants for CuL⁺ and CuL₂ and was used to determine the pKa of TAPS, 8.342.Finally, a briefly comparative analysis between TAPS and other structural related buffers was done. Evaluation based on log β_CuL versus pKa revealed that TES, TRIS, TAPS and AMPSO coordinated via amino and hydroxymethylgroups forming a five-membered chelate ring. For BIS-TRIS and TAPSO, and possibly DIPSO, one or more five-membered chelate rings involving additional hydroxyl groups are also likely formed.     

Iron(III) complexes of the tris-(3-aminopropyl) derivative of a 14-membered tetraazamacrocycle: Potentiometric,spectroscopic and electrochemical studies

The properties of the iron(III) complexes of the ditopic macrocyclic ligand with three aminopropyl pendant arms, L¹ = 3,7,11-tris-(3-aminopropyl)-3,7,11,17-tetraazabicyclo[11.3.1]heptadeca-1(17),13,15-triene were investigated in aqueous solution. Potentiometric studies indicated the presence of mononuclear [FeH_hL¹]^h+3 (h = 0–3), and dinuclear [Fe₂L¹]⁶⁺, [Fe₂L¹(OH)]⁵⁺ and [Fe₂L¹(OH)₂]⁴⁺ complexes, and their stability constants were determined at 298.2 K and ionic strength 0.10 mol dm⁻³ in KNO₃. The log K values of mononuclear protonated species indicated the consecutive deprotonation of the aminopropyl arms, suggesting the nitrogen donor atoms from the macrocycle as the preferred coordination environment for the first metal centre, and the amines from the pendant arms for the second one. The dinuclear complex is formed at about 85% of the total amount of the metal ion for 2:1 Fe:L¹ ratio solutions at pH 4.0–4.5. The log K values of the deprotonation of dinuclear hydrolysed species are consistent with the presence of two water molecules directly bound to the metal centres. Spectroscopic UV–Vis and IR data for 2:1 Fe³⁺:L¹ ratio samples confirmed the existence of dinuclear and hydroxo dinuclear species. EPR spectra of these solutions were interpreted by an equilibrium of two high-spin d⁵ state of iron(III) species with different rhombic E/D distortions. Electrochemical studies also established the formation of mono- and dinuclear complexes, showing irreversible redox behaviour. The two metal centres on the dinuclear complexes have only weak interactions.     

A new sulfonamide derivative as magnesium ion receptor: N-tosyl-2,6-diisopropyl-4-(2,3-dimethoxylbenzoylamide)aniline

N-Tosyl-2,6-diisopropyl-4-(2,3-dimethoxylbenzoylamide)aniline (1) has been synthesized and its metal ion (Na⁺, K⁺, Ca²⁺, Mg²⁺) coordinating properties investigated by FT-IR, ESI-MS, and ¹H NMR methods. Among the tested metal ions, the overall stability constant (log K) for Mg²⁺ (6.89) is the highest (Na⁺, 5.64; K⁺, 5.43; Ca²⁺, 5.51) in 10% water/THF at 25.0 ± 0.5 °C determined by UV-vis spectroscopy, indicating that 1 is a potent ionophore for Mg²⁺ ion.     

An imidazolidin-1-ol, nitrone and oxadiazinane ring-chain-ring tautomeric dynamic combinatorial library

A dynamic combinatorial library (DCL) based on benzylidene exchange reactions between imidazolidin-1-ol, nitrone and oxadiazinane (INO) ring-chain-ring tautomers at room temperature is created. The probable mechanism of the reaction is discussed based on Hammett type correlation analyses. The equilibria in the DCL are defined as interconversion of INOAr-X to INOAr-Y as a result of reactions with the corresponding aldehydes Y-ArCHO and X-ArCHO and are shown to depend on the σ constants of the substituents and are described by a simple equation log K_XY = ρσ_dif + log K_XY(X = Y). The prediction of K_XY for any INOAr-X and INOAr-Y interconversion requires only the experimental values of ρ and the known Hammett σ constants of the substituents. The effect of Zn(II) and CF₃SO₃H on the DCL equilibria is also reported.     

Number of species in complexation equilibria of SNAZOXS or Naphtylazoxine 6S and Cd(2+), Co(2+), Cu(2+), Ni(2+), Pb(2+) and Zn(2+) ions by PCA of UV-vis spectra

A critical comparison of the various PCA methods on the absorbance matrix data concerning the complexation equilibria between SNAZOXS and Cd²⁺, Co²⁺, Cu²⁺, Ni²⁺, Pb²⁺ and Zn²⁺ or Naphtylazoxine 6S and Cd²⁺, Cu²⁺, Ni²⁺ and Zn²⁺ at 25 °C is performed. The number of complex species in a complex-forming equilibria mixture is the first important step for further qualitative and quantitative analysis in all forms of spectral data treatment. Therefore, the accuracy of the nine selected index functions for the prediction of the number of light-absorbing components that contribute to a set of spectra is critically tested using the principal component PCA algorithm INDICES in S-Plus software. Four precise methods based upon a knowledge of the experimental error of the absorbance data and five approximate methods requiring no such knowledge are discussed. Precise methods always predict the correct number of components even a presence of the minor species in mixture. Due to the large variations in the index values and even at logarithmic scale they do not reach an obvious point where the slope changes. An improved identification with the second or third derivative and derivative ratio function for some indices is preferred. Behind the number of various complexes formed the stability constants of species ML, ML₂, (and ML₃, respectively) type log β₁₁, log β₁₂, (and log β₁₃, respectively) for the system of SNAZOXS (ligand L) with six metals (the standard deviation s(log β_pq) of the last valid digits are in brackets) Cd²⁺ (4.50(3), 8.36(7)), Co²⁺ (5.75(6), 9.79(9), 13.05(2)), Cu²⁺ (6.69(6), 11.40(7)), Ni²⁺ (6.44(8), 10.91(11), 15.07(10)), Pb²⁺ (5.63(5), 9.97(9)) and Zn²⁺ (5.11(3), 8.84(5)) and for system of Naphtylazoxine 6S with Cd²⁺ (6.08(4), 11.44(7), 16.06(11)), Cu²⁺ (7.80(8), 13.41(14)), Ni²⁺ (6.35(12), 11.43(19), 16.68(24)) and Zn²⁺ (7.01(8), 12.65(15)) at 25 °C are estimated with SQUAD(84) nonlinear regression of the mole-ratio spectrophotometric data. The proposed strategy of an efficient experimentation in a stability constants determination, followed by a computational strategy, is presented with goodness-of-fit tests and various regression diagnostics able to prove the reliability of the chemical model proposed.     

Estimation of stability constants of copper(II) and nickel(II) chelates with dipeptides by using topological indices

The estimation of the overall stability constants β₁ of copper(II) and nickel(II) chelates with dipeptides was performed by using the model with the valence connectivity index of the 3rd order (³χ^v). It was done by dividing β₁ to its constituting constants K₁ and K_a, and subsequently by dividing the basic set into subsets or treating the chelate rings as separate units. Altogether 15 copper(II) and eight nickel(II) chelates with dipeptides were investigated. Six models for the estimation of log K₁ and pK_a were checked, most of them by usage of indicator variables (for differentiation of copper(II) and nickel(II) complexes or subclasses of ligands). Estimates of log β₁ gave the range of rms values from 0.19 to 0.27. For the best model, errors of estimates were less than 0.34.     

Enhancement reagents for simultaneous vapor generation of zinc and cadmium with intermittent flow system coupled to atomic fluorescence spectrometry

Simultaneous vapor generation of zinc (Zn) and cadmium (Cd) was evaluated by atomic fluorescence spectrometry coupled with an intermittent flow vapor generation system. Some complexing reagents, surfactant and transition metal ions were respectively tested as enhancement reagents. Experiments showed that an appropriate amount of 8-hydroxyquinoline or phenanthroline and nickel ion simultaneously, effectively improved the vapor generation efficiency of Zn and Cd. The volatile species generation was presumed to be a hydrogenation process interpreting how the enhancement reagents played an important role in vapor generation. Additionally, due to the instability of volatile species, reaction temperature, rapid and sufficient mixing of reagents and rapid separation of the volatile species from liquid phase were also crucial. The method of simultaneous determination of Zn and Cd by intermittent flow vapor generation led to the development of atomic fluorescence spectrometry. The detection limits (3σ_b) were 1.6 μg l⁻¹ for Zn and 0.01 μg l⁻¹ for Cd and the relative standard deviations were 3.6% for Zn (50 μg l⁻¹, n=11) and 1.7% for Cd (2 μg l⁻¹, n=11) respectively. Results for the determination of Zn and Cd have been confirmed by the analysis of CRMs with good agreement between the certified and found values.     

Analysis of the factors that significantly influence the stability of fluoroquinolone-metal complexes

The aim of the present study was to evaluate factors contributing to the differences between the overall stability constants (log β_pqr) of the fluoroquinolone-metal ion complexes.The experiments were performed using potentiometric titration method in wide pH range. The overall stability constants (log β_pqr) were determined using the Hyperquad program. Complexation equilibria of eight different fluoroquinolones with six divalent and trivalent metal ions were investigated in this study.The authors employed a multifactorial ANOVA analysis, fixed effect model to describe the influence of particular variables affecting the stability of the analyzed complex species. Four different variables were set at different levels labeled. The ligand number (LF) was the first factor. LF determined the number of fluorochinolone molecules in the complex structure, and could take the values 1, 2 or 3. The second factor (Me) was connected with the type of the metal ion bonded in the complex. Since six different metal cations were studied, the Me factor was described with six levels. The number of hydrogen or hydroxide groups substituted into the complex molecule was the third variable (HR) with many levels labeled: q, a, s, d, f and g. The last factor FQ described the type of the fluorochinolone used for complex formations. All variables analyzed here were statistically significant (p value lower than 0.01), which indicates that all of them strongly affect the log β_pqr value. Binary interactions (LF-Me, LF-FQ, Me-HR and Me-FQ) between variables were also stated, which suggests that the effects of these variables were higher than we could calculate based on the effect of each variable alone.The ANOVA analysis has shown that the following factors Me, LF and HR were the most important for the stability of the fluoroquinolone-metal ion complexes. It was also found that according to the FQ factor (type of ligand molecule) all analyzed fluoroquinolones formed stable complexes with metals. It was proved that the application of ANOVA for the entire complexation profile of analyzed fluoroquinolones with polyvalent metal ions was a valid technique for detecting the statistically significant differences in the complexation profiles. Such information may be very useful for better understanding and interpretation of differences in bioavailability of fluoroquinolones and their interactions with antacids and other multimineral drugs.