Adsorption of small molecules on a (2 × 1) PdZn surface alloy on Pd(1 1 1)

The adsorption of methanol, formaldehyde, methoxy, carbon monoxide and water on a (2 × 1) PdZn surface alloy on Pd(1 1 1) has been studied using DFT calculations. The most stable adsorption structures of all species have been investigated with respect to the structure and the electronic properties. It was found that methanol is only weakly bound to the surface. The adsorption energy only increases with higher methanol coverage, where chain structures with hydrogen bonds between the methanol molecules are formed. The highest adsorption energy was found for the formate species followed by the methoxy species. The formaldehyde species shows quite some electronic interaction with the surface, however the stable η₂ formaldehyde has only an adsorption energy of about 0.49 eV. The calculated IR spectra of the different species fit quite well to the experimental values available in the literature.     

Interaction of Ag with the Si(1 1 1)1 × 1–H surface

Synchrotron radiation based photoemission spectroscopy (SRPES) and low energy electron diffraction (LEED) are used to study the interaction between Ag atoms and the Si(1 1 1)1 × 1–H surface. At an Ag coverage of 0.063 monolayers (ML) on the Si(1 1 1)1 × 1–H surface, the Si 2p component corresponding to Si–H bonds decreases, and an additional Si 2p component appears which shifts to a lower binding energy by 109 meV with respect to the Si bulk peak. The new Si 2p component is also observed for 0.25 ML Ag on the Si(1 1 1)7 × 7 surface. These findings suggest that Ag atoms replace the H atoms of the Si(1 1 1)1 × 1–H surface and form direct Ag–Si bonds. Contrary to the widely accepted view that there is no chemical interaction between Ag particles and the H-passivated Si surface, these results are in good agreement with recent first-principles calculations.     

Selective adsorption of coronene on Si(1 1 1)-(7 × 7)

The adsorption of coronene (C₂₄H₁₂) on the Si(1 1 1)-(7 × 7) surface is studied using scanning tunneling microscopy (STM). Upon room temperature submonolayer deposition, we find that the coronene molecules preferentially adsorb on the unfaulted half of the 7 × 7 unit cell. Molecules adsorbed on different sites can be induced to move to the preferential sites by the action of the tip in repeated image scans. Imaging of the molecules is strongly bias dependent, and also critically depends on the adsorption site. We analyze the results in terms of differential bonding strength for the different adsorption sites and we identify those substrate atoms which participate in the bonding with the molecule.     

4 × 10 Gb/s wavelength multicasting with tunable NRZ-to-RZ pulse format conversion using time- and wavelength-interleaved pulses

We demonstrate 4 × 10 Gb/s simultaneous wavelength multicasting and NRZ-to-RZ pulse format conversion with tunable duty cycle. Multicasting is achieved by four-wave mixing of the input signal with a time- and wavelength-interleaved laser source, while the format conversion is obtained through the use of a pulsed probe. The input data are copied to four multicast outputs with a common relative delay time. Error-free operations have been obtained in all the outputs with power penalties ranging from ? 0.5 to 0.5 dB. Output duty cycles with a tuning range of 4.3 ps have been achieved.     

Band structure of a cylindrical GaAs/AlxGa1 − xAs superwire

We investigate the existence of a band structure in GaAs/Al_xGa_1 − xsuperlattices with cylindrical symmetry, namely GaAs/Al_xGa_1 − xAs cylindrical superwires. These systems consists of a large number of concentric GaAs and Al_xGa_1 − xAs alternate cylindrical shells around a central GaAs cylindrical wire. Despite the radial configuration (that breaks the translational symmetry) and the electron confinement in the central three-dimensional well, a band structure can emerge depending on the number and thickness of the cylindrical shells.     

Reversible and irreversible reactions of three oxygen precursors on InAs(0 0 1)-(4 × 2)/c(8 × 2)

The substrate reactions of three common oxygen sources for gate oxide deposition on the group III rich InAs(0 0 1)-(4 × 2)/c(8 × 2) surface are compared: water, hydrogen peroxide (HOOH), and isopropyl alcohol (IPA). Scanning tunneling microscopy reveals that surface atom displacement occurs in all cases, but via different mechanisms for each oxygen precursor. The reactions are examined as a function of post-deposition annealing temperature. Water reaction shows displacement of surface As atoms, but it does not fully oxidize the As; the reaction is reversed by high temperature (450 °C) annealing. Exposure to IPA and subsequent low-temperature annealing (100 °C) show the preferential reaction on the row features of InAs(0 0 1)-(4 × 2)/c(8 × 2), but higher temperature anneals result in permanent surface atom displacement/etching. Etching of the substrate is observed with HOOH exposure for all annealing temperatures. While nearly all oxidation reactions on group IV semiconductors are irreversible, the group III rich surface of InAs(0 0 1) shows that oxidation displacement reactions can be reversible at low temperature, thereby providing a mechanism of self-healing during oxidation reactions.     

Passivation effect of allylamine molecule on the electronic structure of a Si(001) − (2 × 1) surface

The chemisorption of the allylamine molecule, which contains two functional groups (ethenyl and hydroxyl), on a Si(001) ? (2 × 1) surface was studied using density functional theory (ab-initio DFT) based on the pseudopotential approach. In particular, we focused on the determination of the most stable position of the CC double bond in the ethenyl group and observation of the passivation effect of allylamine on the electronic structure of the clean Si(001) ? (2 × 1) phase. For this purpose, all of the possible interaction mechanisms occurring at the interface were considered: (i) dissociative bonding where the CC bond is parallel to the silicon surface, (ii) dissociative bonding where the CC bond is perpendicular to the silicon surface, and (iii) the [2 + 2] CC cycloaddition reaction. From our total energy calculations, it was found that the bifunctional allylamine molecule attached to the Si(001) ? (2 × 1) surface through the amino functional group, by breaking the N–H bond and forming a Si–H bond and Si–NHCH2CHCH2 surface fragments. During this process, the ethenyl functional group remains intact, and so can be potentially used as an extra reactive site for additional chemical interactions. In addition to these findings, the nudged elastic band method (NEB) calculations related with the reaction paths showed that the parallel position of the CC bond with respect to the surface of the substrate is more favorable. In order to see the influence of the chemisorbed allylamine molecule on the surface states of the clean Si(001) – (2 × 1), we also plotted the density of states (DOS), in which it is seen that the clean Si(001) – (2 × 1) surface was passivated by the adsorption of allylamine.     

H adsorption at Ag/Si interfaces in epitaxially grown Ag(1 1 1) films on Si(1 1 1)7 × 7 substrates

The interaction of atomic H with Ag(1 1 1)/Si(1 1 1)7 × 7 surfaces was studied by thermal desorption (TD) spectroscopy and scanning tunneling microscopy (STM) at room temperature. TD spectroscopy revealed an intense peak from mono H–Si bonds, even though the Si surface was covered by the Ag atoms. This peak was not observed from Ag-coated SiO₂/Si substrates. STM observation showed no clear change of the Ag surface morphology resulting from H exposure. All these results indicate that the atomic H adsorbs at neither the Ag surfaces nor Ag bulk sites, but at the Ag/Si interface by diffusing through the Ag film.     

Coverage dependence of glycine adsorption on the Ge(100) − 2 × 1 surface

A combination of infrared spectroscopy, X-ray photoelectron spectroscopy and density functional theory has been used to investigate the adsorption behavior of glycine at the Ge(100) ? 2 × 1 surface under ultrahigh vacuum conditions. Comparison of experimental and simulated IR spectra indicates that at 310 K, glycine adsorbs on Ge(100) ? 2 × 1 via O–H dissociation, with some fraction of the products also forming an N dative bond to a neighboring germanium atom. O–Ge dative bonding is not observed. As coverage increases, the surface concentration of the monodentate O–H dissociated adduct increases, while that of the N dative-bonded species appears constant. XPS data support and clarify the IR findings and reveal new insights, including the presence at higher coverage of a minor product that has undergone dual O–H and N–H dissociation. These findings are supported by the calculated energy diagrams, which indicate that the reaction of a glycine molecule on the Ge(100) ? 2 × 1 surface via O–H dissociation and interdimer N dative bonding is both kinetically and thermodynamically favorable and that N–H dissociation of this adduct is feasible at room temperature given incomplete thermal accommodation along the reaction pathway.     

Room-temperature chemisorption of chloroethylenes on Si(1 1 1)7 × 7: formation of surface vinyl,vinylidene and their chlorinated derivatives

Chemisorption of a family of six chloroethylenes (C₂H₃Cl, 1,1-C₂H₂Cl₂, cis-1,2-C₂H₂Cl₂, trans-1,2-C₂H₂Cl₂, C₂HCl₃, and C₂Cl₄) on Si(1 1 1)7 × 7 at room temperature (RT) has been investigated by vibrational electron energy loss spectroscopy (EELS). The characteristic vibrational EELS features have been used to identify the prominent surface species upon RT adsorption. Like ethylene, C₂H₃Cl has been found to predominantly adsorb in a di-σ bonding geometry to the Si surface, while 1,1-C₂H₂Cl₂, cis- and trans-1,2-C₂H₂Cl₂, C₂HCl₃ and, to a lesser extent, C₂Cl₄ appear to undergo dechlorination upon adsorption to form chlorinated vinyl adspecies involving single-σ bonding structures. Evidence of vinylidene (>CCH₂) has been obtained for the first time on a semiconductor surface for the adsorption of 1,1-C₂H₂Cl₂. The present work illustrates that the molecular structure and the Cl content of chloroethylenes play a crucial role in controlling not only the adsorption geometry but also the extent of dechlorination and the resulting adspecies upon RT adsorption on Si(1 1 1).     

The adsorption of a substituted benzene,the ethynyl-trifluoro-toluene on Si(100)-2 × 1

The adsorption of 3-ethynyl-trifluoro-toluene (ETFT) on Si(100)-2 × 1 surface in ultra high vacuum is studied in the low coverage regime, through a joint experimental and theoretical approach. The STM images of both filled and empty states revealed few distinct adsorption configurations. On the basis of Density Functional Theory (DFT) calculations the STM images were simulated and three main adsorption configurations were identified, with a predominance of di-sigma bonded species that leave the benzene ring unreacted. A discussion of the reactivity of the reconstructed silicon surface towards benzene derivatives is proposed by comparing the adsorption of ETFT close related molecules, like styrene and phenylacetylene.     

Ga-induced restructuring of Si(5 5 12) − 2 × 1 reconstructed surface at room temperature

Motivated by the need to form 1D-nanostructured dopants on silicon surfaces, we have attempted to grow Ga on the high index Si(5 5 12) surface which has a highly trenched (1D) morphology. The evolution of the interface with Ga adsorption in the monolayer regime has been probed by in situ AES, LEED and EELS. Controlling the kinetics by changing the Ga flux rates shows an interesting difference in the 1.0 to 1.5 ML region. The low flux rate (0.03 ML/minute) results in a Frank van der Merwe (layer by layer) growth mode up to 2 ML, while the higher flux rate (0.1 ML/minute) shows a transient island formation after the completion of 1 ML. The low rate shows the formation of 2 × (3 3 7) and (2 2 5) superstructures, while only the 2 × (3 3 7) is observed in a wide coverage range for the higher rate. The results demonstrate the ability to kinetically control the surface phases with different electronic properties of this technologically important interface.     

Atomic and nanostructures of monolayer c(2 × 2)NiN on Cu(0 0 1)

Structures of monolayer nickel nitride (NiN) on Cu(0 0 1) surface are studied by X-ray photoelectron spectroscopy (XPS), low energy electron diffraction (LEED) and scanning tunneling microscopy (STM). Formations of Ni–N chemical bonds and NiN monolayer at the surface are confirmed by XPS on the N-adsorbed Cu(0 0 1) surfaces after Ni deposition and subsequent annealing to 670 K. A c(2 × 2) structure is always observed in the LEED patterns, which is a quite contrast to the (2 × 2)p4g structure observed usually at the N-adsorbed Ni(0 0 1) surface. Atomic images by STM indicate the mixture of Ni–N and Cu–N structures at the surface. Density of the trenches on the N-saturated surface decreases and the grid pattern on partially N-covered surfaces becomes disordered with increasing the Ni coverage. These results are attributed to the decrease of the surface compressive stress at the N-adsorbed Cu surface by mixing Ni atoms.     

Surface X-ray diffraction analysis of Fe nanostructured films grown on c(2 × 2)-N/Cu(100)

We report the results of a Surface X-Ray Diffraction (SXRD) study of Fe nanostructured films deposited on c(2 × 2)-N/Cu(100) at room temperature (RT), with Fe coverage Θ_Fe = 0.5 ML and Θ_Fe = 1 ML. The c(2 × 2)-N/Cu(100) surface is an example of self-organised system, that can be used for growth of arrays of metal nano-islands and organic molecules assemblies. We chose two different values of N coverage, Θ_N = 0.3 ML and Θ_N = 0.5 ML, the second value corresponding to N saturation. We monitored the presence of surface diffraction peaks in hk scans and we performed Crystal Truncation Rods (CTR) analysis with ROD fitting programme. In the case of Θ_N = 0.5 ML, i.e. at saturation coverage, the CTR could be fitted with one surface domain with p4gm(2 × 2) symmetry. In the surface cell adopted, N atoms occupy four-fold hollow sites, with Fe (intermixed with Cu) giving rise to a “clock” reconstruction previously observed on iron nitride films obtained by co-deposition and annealing. This result is an indirect confirmation of N surface segregation on top of the Fe films, occurring during the growth at RT. When subsaturation N coverage (Θ_N = 0.3 ML) is used as a substrate for Fe deposition, the best results could be obtained with a model where two surface domains are present: the first one corresponds to a surface cell with Fe sitting in four-fold hollow sites on bare Cu areas, with possible interdiffusion in the second lattice. The second domain is assigned to growth of Fe on the N-covered square islands occurring once the bare Cu areas are fully covered. The SXRD analysis on N-covered surface domains shows that the mechanism of reconstruction and of N segregation on top layer is already active at RT for all N-coverage values.     

Real time dynamics of Si magic clusters mediating phase transformation: Si(111)-(1 × 1) to (7 × 7) reconstruction revisited

Using Scanning Tunneling Microscope (STM), we show that the surface undergoes phase transformation from disordered “1 × 1” to (7 × 7) reconstruction which is mediated by the formation of Si magic clusters. Mono-disperse Si magic clusters of size ~ 13.5 ± 0.5 Å can be formed by heating the Si(111) surface to 1200 °C and quenching it to room temperature at cooling rates of at least 100 °C/min. The structure consists of 3 tetra-clusters of size ~ 4.5 ? similar to the Si magic clusters that were formed from Si adatoms deposited by Si solid source on Si(111)-(7 × 7) [1]. Using real time STM scanning to probe the surface at ~ 400 °C, we show that Si magic clusters pop up from the (1 × 1) surface and form spontaneously during the phase transformation. This is attributed to the difference in atomic density between “disordered 1 × 1” and (7 × 7) surface structures which lead to the release of excess Si atoms onto the surface as magic clusters.     

The miscibility of CuxAg1 − xI using a Tersoff potential

Simulation methods have been used to study the miscibility ofCu_xAg_1 − xI based on a Tersoff potential. Monte Carlo calculations show that Cu_xAg_1 − xI is a complete solid solution. This result agrees well with experiments using NMR and X-ray diffractions methods. Structural, elastic and thermodynamic properties are also predicted at 0.25, 0.5 and 0.75 using molecular dynamics simulations.     

Growth of the Au-induced c(8 × 2) structure on vicinal Ge(001)

We have studied the formation of Ge(001) c(8 × 2)–Au surfaces on vicinal samples by scanning tunneling microscopy. The vicinal samples are tilted 1° toward [110]. The c(8 × 2)–Au surface is prepared by depositing 0.75 ± 0.05 ML of Au onto a germanium surface held at 800 K. The anisotropy introduced by the atomic steps of the vicinal surface and the preferential etching of S_B steps during Au deposition is sufficient to introduce a preferred growth direction for the c(8 × 2)–Au phase. The result is a sample on which 78% of the surface is populated by Au-induced chains oriented parallel to the step direction. These parallel Ge(001) c(8 × 2)–Au domains are separated by single or multiple height D_A steps (0.28 nm high).